Ionic liquids as a reaction medium for lipase-catalyzed methanolysis of sunflower oil

Ionic liquids, 1-butyl-3-methyl imidazolium hexafluorophosphate ([BMIm][PF₆]) and 1-ethyl-3-methyl imidazolium hexafluorophosphate ([EMIm][PF₆]), were used for the methanolysis of sunflower oil using Candida antarctica lipase (Novozyme 435) and gave yields of fatty acid methyl esters at 98–99% within 10 h. The optimum conditions of methanolysis in hydrophobic ionic liquids are 2% (w/w) lipase, 1:1 (w/w) oil/ionic liquid and 1:8 (mol/mol) oil/methanol at 58–60°C. Methanolysis using hydrophilic ionic liquids, 3-methyl imidazolium tetrafluoroborate ([HMIm][BF₄]) and 1-butyl-3-methyl imidazolium tetrafluoroborate ([BMIm][BF₄]), gave very poor yields. A hydrophobic ionic liquid thus protects the lipase from methanol. Recovered ionic liquids and lipase were used for four successive reaction cycles without any significant loss of activity.     

Tyrosinase activity in ionic liquids

Activity of mushroom tyrosinase was studied in three ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIm][PF₆]), 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF₄]) and 1-butyl-3-methylimidazolium methylsulfate ([BMIm][MeSO₄]), and was compared to that in chloroform. Kinetic parameters of the enzyme were determined and the results indicate that the enzyme in ionic liquids basically follows the same catalytic mechanism as in water, and that the ionic liquids may affect the enzyme activity by direct interacting with the enzyme and thus hindering the E–S binding due to their high hydrophilicity and polarity.     

Stereoselective synthesis of (R)-1-chloro-3(3,4-difluorophenoxy)-2-propanol using lipases from Pseudomonas aeruginosa in ionic liquid-containing system

Direct transesterification of (R,S)-1-chloro-3-(3,4-difluorophenoxy)-2-propanol (rac-CDPP) (a key intermediate in the synthesis of the chiral drug (S)-lubeluzole) with vinyl butyrate by lipases from Pseudomonas aeruginosa (P. aeruginosa) MTCC 5113 was performed in hexane with ionic liquids (ILs) 1-butyl-3-methyl imidazolium hexafluorophosphate [BMIm][PF₆] and 1-butyl-3-methyl imidazolium tetrafluoroborate [BMIm][BF₄] as co-solvents. The maximum conversion (>49%) and enantiomeric excess (ee > 99.9%) was achieved in 6 h of incubation at 30 °C with [BMIm][PF₆] as co-solvent in a two-phase system. The enzyme was able to perform with the same specificity even at 60 °C in the presence of ILs. It was possible to use lipases repeatedly for more than 10 times while still maintaining absolute enantioselectivity and reactivity. Stability studies on lipases from P. aeruginosa in ILs revealed the fact that the enzyme constancy and the reactivity in catalyzing transesterification of rac-CDPP into (S)-1-chloro-3-(3,4-difluorophenoxy)-2-butanoate was of the order of [BMIm][PF₆] > [BMIm][BF₄] in two-phase system.     

Effect of ionic liquid [BMIM][PF<Subscript>6</Subscript>] on asymmetric reduction of ethyl 2-oxo-4-phenylbutyrate by <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

The effect of ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆]) on the asymmetric reduction of ethyl 2-oxo-4-phenylbutyrate (EOPB) to synthesize optical active ethyl 2-hydroxy-4-phenylbutyrate (EHPB) catalyzed by Saccharomyces cerevisiae was investigated. (R)-EHPB [70.4%, e.e.(R)] is obtained using ethyl ether or benzene as the solvent. The main product is (S)-EHPB [27.7%, e.e.(S)] in [BMIM][PF₆]. However, in ionic liquid-water (10:1, v/v) biphasic system, the enantioselectivity of the reduction is shifted towards (R)-side, and e.e.(R) is increased from 6.6 to 82.5% with the addition of ethanol (1%, v/v). The effect of the use of [BMIM][PF₆] as an additive in relatively small amounts on the reduction was also studied. We find that there is a decline in the enantioselectivity of the reduction in benzene. In addition, a decrease in the conversion of EOPB and the yield of EHPB with increasing [BMIM][PF₆] concentrations occurs in either organic solvent–water biphasic systems or benzene.     

Enantioselective acylation of (RS)-phenylethylamine catalysed by lipases

The enzymatic acylation of (RS)-phenylethylamine with different acyl donors catalysed by lipases, was studied in organic solvents with different hydrophobicities and in mixtures with ionic liquids ((ILs); [BMIm][BF₄], [BMIm][SCN], [BMIm][Cl] and [BMIm][PF₆]). Using lipases from Candida antarctica B (CAL-B) and from Aspergillus niger higher conversion degrees and E-values were obtained with ethyl acetate as the acyl donor. When CAL-B was used as the biocatalyst, in a two-phase system formed by [BMIm][X]/dichloromethane or [BMIm][X]/chloroform, the selectivity was better than that obtained in pure organic solvents. The selectivity was found to be related to individual anions in ILs. In this reaction, the ion effectiveness in enhancing the enzyme selectivity followed the series: Cl⁻ > SCN⁻ > BF₄⁻ > PF₆⁻ in mixtures with dichloromethane, and PF₆⁻ > BF₄⁻ > SCN⁻ > Cl⁻ in mixtures with chloroform.     

Lipase-catalyzed transesterification in several reaction systems: An application of room temperature lonic liquids for bi-phasic production ofn-butyl acetate

Organic solvents are widely used in biotransformation systems. There are many efforts to reduce the consumption of organic solvents because of their toxicity to the environment and human health. In recent years, several groups have started to explore novel organic solvents called room temperature ionic liquids in order to substitute conventional organic solvents. In this work, lipase-catalyzed transesterification in several uni-and bi-phasic systems was studied. Two representative hydrophobic ionic liquids based on 1-butyl-3-methylimidazolum coupled with hexafluorophosphate ([BMIM][PF₆]) and bis[(trifluoromethylsulfonyl) imide] ([BMIM] [Tf₂N]) were employed as reaction media for the transesterification ofn-butanol. The commercial lipase, Novozym 435, was used for the transesterification reaction with vinyl acetate as an acyl donor, The conversion yield was increased around 10% in a water/[BMIM][Tf₂N], bi-phasic system compared with that in a water/hexane system. A higher distribution of substrates into the water phase is believed to enhance the conversion yield in a water/[BMIM][Tf₂N] system. Partion coefficients of the substrates in the water/[BMIM][Tf₂N] bi-phasic system were higher than three times that found in the water/hexane system, while n-butyl acetate showed a similar distribution in both systems. Thus, RTILs appear to be a promising substitute of organic solvents in some biotransformation systems.     

Chemoenzymatic dynamic kinetic resolution of rac-1-phenylethanol in ionic liquids and ionic liquids/supercritical carbon dioxide systems

Continuous dynamic kinetic resolution processes in different ionic liquid/supercritical carbon dioxide biphasic systems were carried out by simultaneously using both immobilized Candida antarctica lipase B (Novozym 435) and silica modified with benzenosulfonic acid (SCX) catalysts at 40°C and 10 MPa. SCX was seen to act as an efficient heterogeneous chemical catalyst for the racemization of (S)-1-phenylethanol in different ionic liquid media ([emim][NTf₂], [btma][NTf₂] and [bmim][PF₆]). Coating both chemical and enzymatic catalysts with ILs greatly improved the efficiency of the process, providing a good yield (76%) of (R)-1-phenylethyl propionate product with excellent enantioselectivity (ee = 91–98%) in continuous operation.     

Extracting keratin from chicken feathers by using a hydrophobic ionic liquid

Keratin was extracted from chicken feathers by using a hydrophobic ionic liquid (IL), 1-hydroxyethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide ([HOEMIm][NTf₂]). Extracted keratin has good solubility in water while the ionic liquid is immiscible with water, and therefore the extracted keratin could be easily separated from the reaction system by water. The effects of ionic liquid, NaHSO₃, reaction temperature and time were investigated and extracting conditions were optimized. The maximum yield of keratin was up to about 21% with mass ratio of feathers to NaHSO₃1:1 and mass ratio of feathers to ionic liquid 1:40 at 80 °C for 4 h. Moreover, there was no obvious loss in the yield after ionic liquid was reused for five batches under optimized conditions. In addition, the recovery of ionic liquid was about 95% each time. The results indicated that [HOEMIm][NTf₂] was very efficient as catalyst and solvent for dissolving feathers and could be easily recovered due to its hydrophobicity.     

Growth of Escherichia coli, Pichia pastoris and Bacillus cereus in the Presence of the Ionic Liquids [BMIM][BF4] and [BMIM][PF6] and Organic Solvents

The influence of the two most commonly used ionic liquids (1-butyl-3-methyl imidazolium tetrafluoroborate, [BMIM][BF₄], 1-butyl-3-methyl imidazolium hexafluorophosphate, [BMIM][PF₆]) and three selected organic solvents (dimethylsulfoxide, ethanol, methanol) on the growth of Escherichia coli, Pichia pastoris and Bacillus cereus was investigated. [BMIM][BF₄] was toxic at 1% (v/v) on all three microorganisms. The minimal inhibitory concentration (MIC) of [BMIM][BF₄] on E. coli growth was between 0.7 and 1% (v/v). In contrast, [BMIM][PF₆] was less toxic for P. pastoris and B. cereus, whereas E. coli was not able to tolerate [BMIM][PF₆] (MIC value: 0.3–0.7% v/v). Growth of P. pastoris was unaffected by [BMIM][PF₆] at 10% (v/v). Similar results were found for dimethylsulfoxide. Thus, ionic liquids (ILs) can have substantial inhibitory effects on the growth of microorganisms, which should be taken into account for environmental reasons as well as for the use of ILs as co-solvents in biotransformations. Revisions requested 2 November 2005; Revisions received 20 December 2005     

15α-Hydroxylation of a steroid (13-ethyl-gon-4-en-3,17-dione) by Penicillium raistrickii in an ionic liquid/aqueous biphasic system

Biphasic processes are used in whole-cell biotransformation to overcome the low water solubility of substrates and products as well as their inhibitory effects on the biocatalyst. Commercially available [NTf₂]- and [PF₆]-based ionic liquids (ILs) were used in a biphasic system for the 15α-hydroxylation of 13-ethyl-gon-4-en-3,17-dione by Penicillium raistrickii. With the substrate at 5 g l^?1 and a volume ratio of IL to buffer, buffer pH and cell density at, 1:9, 6.5, 16.8 g_DW l^?1, respectively, the 15α-hydroxylation of 13-ethyl-gon-4-en-3,17-dione was achieved with a yield of 70 % after 72 h using [BMIm][NTf₂] in a 50 ml biphasic system. This is compared to a 30 % yield in a monophasic aqueous system. This suggests the potential industrial application of ILs-based biphasic systems for steroid biotransformation.     

Catalytic activity of α-chymotrypsin in enzymatic peptide synthesis in ionic liquids

The catalytic activity of α-chymotrypsin in the enzymatic peptide synthesis of N-acetyl-l-tryptophan ethyl ester with glycyl glycinamide was examined in ionic liquids and organic solvents. The water content in 1-ethyl-3-methylimidazolium bis(fluorosulfonyl)imide ([emim][FSI]) affected the initial rates of peptide synthesis and hydrolysis. The activity of α-chymotrypsin was influenced by a kind of anions consisting of the same cation, [emim], when an ionic liquid was used as a solvent. The initial rate of peptide synthesis was improved 16-fold by changing from an organic solvent, acetonitrile, to an ionic liquid, [emim][FSI], at 25 °C. The activity of α-chymotrypsin in the peptide synthesis in [emim][FSI] was 17 times greater than that in acetonitrile at 60 °C, although the activity of α-chymotrypsin in the peptide synthesis gradually decreased with an increase in reaction temperature in [emim][FSI], similar to organic solvents. Moreover, α-chymotrypsin exhibited activity in [emim][FSI] and [emim][PF₆] at 80 °C.     

Candida antarctica lipase B catalyzed enantioselective acylation of pyrimidine acyclonucleoside

Abstract

The influence of solvent and acyl group donor on selectivity of the transesterification reaction of 1-[1′,3′-dihydroxy-2′-propoxymethyl]-5-methyluracil, a structural analogue of ganciclovir was examined. Lipase (EC 3.1.1.3) B from Candida antarctica (CALB) enabled desymmetrization of prochiral hydroxyl groups when 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim][PF₆]) was used as a reaction medium. It was observed that CALB was up to 2.7–4 times more enantioselective in the ionic liquid [Bmim][PF₆] than in conventional organic solvents.     

Catalytic performance of cross-linked enzyme aggregates of Penicillium expansum lipase and their use as catalyst for biodiesel production

Cross-linked enzyme aggregates (CLEAs) of lipase from Penicillium expansum (PEL) were prepared directly from fermentation broth, a more practical and economically viable procedure than the generally used methods that require purified or partially purified enzymes for CLEA preparation. A systematic study of the activity and stability of PEL-CLEAs was undertaken in aqueous solution, organic solvents, and ionic liquids (ILs). Immobilization of the enzyme resulted in a significantly enhanced stability in aqueous solution with regard to pH and temperature. PEL-CLEAs showed an improved activity in the IL [BMIm][PF₆] relative to that observed in hexane, both keeping increased with temperature (up to 90 °C in the IL and 60 °C in hexane). The effect of water content and water activity in these two nonaqueous media showed similar patterns as for the uncrosslinked enzyme. The half life of the CLEAs was higher in hydrophobic organic solvents (hexane and chloroform) than in aqueous solution, and presented a sigmoid relationship with the log P of the organic solvent tested. PEL-CLEAs catalyzed biodiesel production from microalgal oil in the IL [BMIm][PF₆] with a conversion of 85.7%, demonstrating that they can be taken as a promising catalyst for this application.     

Catalytic activity of α-chymotrypsin in enzymatic peptide synthesis in ionic liquids

The catalytic activity of α-chymotrypsin in the enzymatic peptide synthesis of N-acetyl-l-tryptophan ethyl ester with glycyl glycinamide was examined in ionic liquids and organic solvents. The water content in 1-ethyl-3-methylimidazolium bis(fluorosulfonyl)imide ([emim][FSI]) affected the initial rates of peptide synthesis and hydrolysis. The activity of α-chymotrypsin was influenced by a kind of anions consisting of the same cation, [emim], when an ionic liquid was used as a solvent. The initial rate of peptide synthesis was improved 16-fold by changing from an organic solvent, acetonitrile, to an ionic liquid, [emim][FSI], at 25 °C. The activity of α-chymotrypsin in the peptide synthesis in [emim][FSI] was 17 times greater than that in acetonitrile at 60 °C, although the activity of α-chymotrypsin in the peptide synthesis gradually decreased with an increase in reaction temperature in [emim][FSI], similar to organic solvents. Moreover, α-chymotrypsin exhibited activity in [emim][FSI] and [emim][PF₆] at 80 °C.     

Dynamic structure–function relationships in enzyme stabilization by ionic liquids

The stability of α-chymotrypsin and Candida antarctica lipase B (CALB) in two ionic liquids (i.e. 1-ethyl-3-methyl-imidazolium, bis[(trifluoromethyl)sulfonyl]imide [emim] [NTf₂], and butyl-trimethylamonium bis[(trifluoromethyl)sulfonyl]imide [btma] [NTf₂]) has been studied. Both enzymes were strongly stabilized by the ionic liquids, the respective half-life times increasing 96 and 1660 times, with respect to those obtained in classical organic solvents such as 1-propanol and hexane, respectively. The stabilization of both enzymes by ionic liquids may be related to the associated structural changes of proteins that they can be observed by both fluorescence and circular dichroism spectroscopic studies.     

Metal-metal stacking patterns between and with [Pt(tpy)X] cations

A comparative study of metallophilic interactions of [Pt(tpy)X]⁺ cations (tpy = 2,2′:6′,2″-terpyridine) in the presence of two different types of anions, (i) []⁻ anions that form double salts and (ii) simple p-block anions, is reported. Single-crystal X-ray diffraction data, solution-state ¹⁹⁵Pt NMR spectra, and variable temperature solid-state luminescence spectra are reported. Three [Pt(tpy)Cl]Y derivatives (Y = SbF₆, 1, SbF₆·CH₃CN, 4, PF₆, 2) and the [Pt(tpy)Br]PF₆ analog, 3, as well as two new double salts [Pt(tpy)CN][Au(CN)₂], 5, and [Pt(tpy)CN]₂[Au(C₆F₅)₂](PF₆), 6, have been synthesized and characterized. Structural analysis shows consistent patterns in Pt···Pt interactions that vary slightly depending on the coordinating halogen or pseudo-halogen X, counter anion Y, and lattice solvent. Metallophilic interactions are seen between [Pt(tpy)X]⁺ cations with all types of X ligands, but only with π-accepting X′ ligands from []⁻ anions are Pt?Au metallophilic interactions seen to be favored over Pt?Pt interactions. The [Au(CN)₂]⁻ anion consistently forms Pt···Au metallophilic contacts, unlike [Au(C₆F₅)₂]⁻. The ¹⁹⁵Pt NMR chemical shifts are ∼−2750 ppm for π-donor ligands and near −3120 ppm for π-acceptor ligands in [Pt(tpy)X]PF₆ compounds. Luminescence data show an unusual blue shift in [Pt(tpy)CCPh][Au(C₆F₅)₂] versus [Pt(tpy)CCPh]PF₆ ascribed to an intermolecular charge transfer.     

Penicillium expansum lipase-catalyzed production of biodiesel in ionic liquids

Penicillium expansum lipase (PEL) was used to catalyze biodiesel production from corn oil in [BMIm][PF₆]¹ (an ionic liquid, IL) and tert-butanol. Both systems were optimized in terms of MeOH/oil molar ratio, reaction temperature, enzyme loading, solvent volume, and water content. The high conversion obtained in the IL (86%) as compared to that in tert-butanol (52%) demonstrates that the IL is a superior solvent for PEL-catalyzed biodiesel production. Poor yields were obtained in a series of hydrophilic ILs. Addition of salt hydrates affected biodiesel production predominantly through the specific ion (Hofmeister) effect. The impact of methanol on both activity and stability of PEL in the IL and in hexane was investigated, in comparison to the results obtained by two commonly used lipases, Novozym 435 and Lipozyme TLIM. The results substantiate that while different lipases show different resistance to methanol in different reaction systems, PEL is tolerant to methanol in both systems.     

An electrochemical aptasensor electrocatalyst for detection of thrombin

This work reports a novel signal amplification strategy based on three-dimensional ordered macroporous C₆₀-poly(3,4-ethylenedioxythiophene)-1-butyl-3-methylimidazolium hexafluorophosphate (3DOM C₆₀-PEDOT-[BMIm][BF₆]) for ultrasensitive detection of thrombin by cascade catalysis of Au-PEDOT@SiO₂ microspheres and alcohol dehydrogenase (ADH). Au-PEDOT@SiO₂ microspheres were constructed not only as nanocarriers to anchor the large amounts of secondary thrombin aptamers but also as nanocatalysts to catalyze the oxidation of ethanol efficiently. Significantly, the electrochemical signal was greatly enhanced based on cascade catalysis: First, ADH catalyzed the oxidation of ethanol to acetaldehyde with the concomitant generation of NADH in the presence of β-nicotinamide adenine dinucleotide hydrate (NAD⁺). Then, gold nanoparticles (AuNPs) as nanocatalysts could effectively catalyze NADH to produce NAD⁺ with the help of PEDOT as redox probe. Under the optimal conditions, the proposed aptasensor exhibits a linear range of 2 × 10⁻¹³ to 2 × 10⁻⁸ M with a low detection limit of 2 × 10⁻¹⁴ M for thrombin detection and shows high sensitivity and good specificity.     

Optimization of (R,S)-1-phenylethanol kinetic resolution over Candida antarctica lipase B in ionic liquids

The kinetic resolution of racemates constitutes one major route to manufacture optically pure compounds. The enzymatic kinetic resolution of (R,S)-1-phenylethanol over Candida antarctica lipase B (CALB) by using vinyl acetate as the acyl donor in the acylation reaction was chosen as model reaction. A systematic screening and optimization of the reaction parameters, such as enzyme, ionic liquid and substrates concentrations with respect to the final product concentration, were performed. The enantioselectivity of immobilized CALB commercial preparation, Novozym 435, was assayed in several ionic liquids as reaction media. In particular, three different ionic liquids: (i) 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF₆], (ii) 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF₄] and (iii) 1-ethyl-3-methylimidazolium triflimide [emim][NTf₂] were tested. At 6.6% (w/w) of Novozym 435, dispersed in 9.520 M of [bmim][PF₆] at 313.15 K, using an equimolar ratio of vinyl acetate/(R,S)-1-phenylethanol after 3 h of bioconversion, the highest possible conversion (50%) was reached with enantiomeric excess for substrate higher than 99%.     

One-step production of biodiesel from Jatropha oil with high-acid value in ionic liquids

Catalytic conversion of un-pretreated Jatropha oil with high-acid value (13.8 mg KOH/g) to biodiesel was studied in ionic liquids (ILs) with metal chlorides. Several commercial ILs were used to catalyze the esterification of oleic acid. It was found that 1-butyl-3-methylimidazolium tosylate ([BMIm][CH₃SO₃]; a Brønsted acidic IL) had the highest catalytic activity with 93% esterification rate for oleic acid at 140 °C but only 12% biodiesel yield at 120 °C. When FeCl₃ was added to [BMIm][CH₃SO₃], a maximum biodiesel yield of 99.7% was achieved at 120 °C. Because metal ions in ILs supplied Lewis acidic sites, and more of the sites could be provided by trivalent metallic ions than those of bivalent ones. It was also found that the catalytic activity with bivalent metallic ions increased with atomic radius. Mixture of [BMIm][CH₃SO₃] and FeCl₃ was easily separated from products for reuse to avoid producing pollutants.