Natural attenuation potential of cyanide via microbial activity in mine tailings

Biological removal by indigenous microflora of cyanide, contained in old (6-9 years) and fresh tailings (3 months), was studied in order to assess its natural attenuation potential via biodegradation. To investigate the presence of indigenous microflora in tailings, total heterotrophic and cyanide resistant bacteria were counted using the spread-plate method. The free cyanide mineralization potential was estimated using K14CN in the presence of various unlabeled cyanide concentrations (0, 5, and 10 mg CN/kg). The biodegradation of cyanide contained initially in the samples was also investigated by monitoring formate, formamide, ammonia and total cyanide (CNT) concentrations over 111 days. The enumeration of total heterotrophic and cyanide-resistant bacteria in old tailings showed an average population of 105 cfu/g. However, no growth was detected in fresh tailings. Nevertheless, cyanide mineralization tests indicated the presence, in both old and fresh tailings, of a cyanide-degrading microflora. In old tailings, maximum mineralization percentages of free cyanide ranging from 85% to 100% were obtained after 65 days at all concentrations tested. A mineralization percentage of 83% after 170 days was also observed in fresh tailings. No decrease of total cyanide concentration in old tailings was observed when the biodegradation of endogenous cyanide was tested whereas a significant decrease was recorded in fresh tailings after 96 days. The presence of strong metal-cyanide complexes resistant to biodegradation could explain the absence of biodegradation in old tailings. This study demonstrated the presence of an indigenous free cyanide-degrading microflora in both old and fresh tailings, and suggests that natural attenuation of cyanide in gold mine tailings is likely to occur via microbial activity.     

Isolation and characterization of a cyanide dihydratase from Bacillus pumilus C1.

A cyanide-degrading enzyme from Bacillus pumilus C1 has been purified and characterized. This enzyme consisted of three polypeptides of 45.6, 44.6, and 41.2 kDa; the molecular mass by gel filtration was 417 kDa. Electron microscopy revealed a multimeric, rod-shaped protein approximately 9 by 50 nm. Cyanide was rapidly degraded to formate and ammonia. Enzyme activity was optimal at 37 degrees C and pH 7.8 to 8.0. Activity was enhanced by Sc3+, Cr3+, Fe3+, and Tb3+; enhancement was independent of metal ion concentration at concentrations above 5 microM. Reversible enhancement of enzymatic activity by azide was maximal at 4.5 mM azide and increased with time. No activity was recorded with the cyanide substrate analogs CNO-, SCN-, CH3CN, and N3- and the possible degradation intermediate HCONH2. Kinetic studies indicated a Km of 2.56 +/- 0.48 mM for cyanide and a Vmax of 88.03 +/- 4.67 mmol of cyanide per min/mg/liter. The Km increased approximately twofold in the presence of 10 microM Cr3+ to 5.28 +/- 0.38 mM for cyanide, and the Vmax increased to 197.11 +/- 8.51 mmol of cyanide per min/mg/liter. We propose naming this enzyme cyanide dihydratase.     

Enzymatic assimilation of cyanide via pterin-dependent oxygenolytic cleavage to ammonia and formate in Pseudomonas fluorescens NCIMB 11764

Utilization of cyanide as a nitrogen source by Pseudomonas fluorescens NCIMB 11764 occurs via oxidative conversion to carbon dioxide and ammonia, with the latter compound satisfying the nitrogen requirement. Substrate attack is initiated by cyanide oxygenase (CNO), which has been shown previously to have properties of a pterin-dependent hydroxylase. CNO was purified 71-fold and catalyzed the quantitative conversion of cyanide supplied at micromolar concentrations (10 to 50 micro M) to formate and ammonia. The specific activity of the partially purified enzyme was approximately 500 mU/mg of protein. The pterin requirement for activity could be satisfied by supplying either the fully (tetrahydro) or partially (dihydro) reduced forms of various pterin compounds at catalytic concentrations (0.5 micro M). These compounds included, for example, biopterin, monapterin, and neopterin, all of which were also identified in cell extracts. Substrate conversion was accompanied by the consumption of 1 and 2 molar equivalents of molecular oxygen and NADH, respectively. When coupled with formate dehydrogenase, the complete enzymatic system for cyanide oxidation to carbon dioxide and ammonia was reconstituted and displayed an overall reaction stoichiometry of 1:1:1 for cyanide, O(2), and NADH consumed. Cyanide was also attacked by CNO at a higher concentration (1 mM), but in this case formamide accumulated as the major reaction product (formamide/formate ratio, 0.6:0.3) and was not further degraded. A complex reaction mechanism involving the production of isocyanate as a potential CNO monooxygenation product is proposed. Subsequent reduction of isocyanate to formamide, whose hydrolysis occurs as a CNO-bound intermediate, is further envisioned. To our knowledge, this is the first report of enzymatic conversion of cyanide to formate and ammonia by a pterin-dependent oxygenative mechanism.     

An efficient cyanide-degrading Bacillus pumilus strain

A Gram-positive, aerobic, endospore-forming bacterium was isolated by an enrichment technique for the ability to degrade cyanide and was identified as a Bacillus pumilus strain. The bacterium rapidly degraded 100 mg l-1 of free cyanide in the absence of added inorganic and organic substances. The ability to degrade cyanide was linked to the growth phase and was not exhibited before late exponential/early stationary phase. Cyanide-degrading activity could not be induced before this time by the addition of 20 mg cyanide l-1. Production of the cyanide-degrading activity required 0.01 mg Mn2+ l-1 and did not occur at Mn2+ concentrations below 0.002 mg l-1. Cyanide-degrading activity was intracellular and cell-free extracts rapidly degraded cyanide.     

Enzymatic Assimilation of Cyanide via Pterin-Dependent Oxygenolytic Cleavage to Ammonia and Formate in Pseudomonas fluorescens NCIMB 11764

Utilization of cyanide as a nitrogen source by Pseudomonas fluorescens NCIMB 11764 occurs via oxidative conversion to carbon dioxide and ammonia, with the latter compound satisfying the nitrogen requirement. Substrate attack is initiated by cyanide oxygenase (CNO), which has been shown previously to have properties of a pterin-dependent hydroxylase. CNO was purified 71-fold and catalyzed the quantitative conversion of cyanide supplied at micromolar concentrations (10 to 50 μM) to formate and ammonia. The specific activity of the partially purified enzyme was approximately 500 mU/mg of protein. The pterin requirement for activity could be satisfied by supplying either the fully (tetrahydro) or partially (dihydro) reduced forms of various pterin compounds at catalytic concentrations (0.5 μM). These compounds included, for example, biopterin, monapterin, and neopterin, all of which were also identified in cell extracts. Substrate conversion was accompanied by the consumption of 1 and 2 molar equivalents of molecular oxygen and NADH, respectively. When coupled with formate dehydrogenase, the complete enzymatic system for cyanide oxidation to carbon dioxide and ammonia was reconstituted and displayed an overall reaction stoichiometry of 1:1:1 for cyanide, O₂, and NADH consumed. Cyanide was also attacked by CNO at a higher concentration (1 mM), but in this case formamide accumulated as the major reaction product (formamide/formate ratio, 0.6:0.3) and was not further degraded. A complex reaction mechanism involving the production of isocyanate as a potential CNO monooxygenation product is proposed. Subsequent reduction of isocyanate to formamide, whose hydrolysis occurs as a CNO-bound intermediate, is further envisioned. To our knowledge, this is the first report of enzymatic conversion of cyanide to formate and ammonia by a pterin-dependent oxygenative mechanism.     

Utilization of ammonia,generated from abiotic cyanide degradation,by Rhodotorula rubra

The viability of the yeast Rhodotorula rubra, isolated from liquid samples of gold-mine effluents, was not affected by the presence of 11.52 mM cyanide. The yeast was able to utilize ammonia, generated from abiotic cyanide degradation in the presence of reducing sugars, in aerobic culture at pH 9.0. These physiological characteristics encourage studies with mixed cultures of cyanide-degrading organisms, using this yeast as an assimilator of ammonia.The authors are with the Department of Microbiology, Institute of Biological Sciences. Federal University of Minas Gerais, C. P. 486, 31270-901 Belo Horizonte, Brazil     

Degradation of cyanide by a bacterial mixture composed of new types of cyanide-degrading bacteria

Summary A mixed culture of bacteria capable of growth on cyanide was isolated from an activated sludge of coal tar wastewater by an enrichment culture technique. The predominant cyanide-degrading microorganisms found in this bacterial mixture were identified as species of the genera Klebsiella, Serratia, Moraxella, and Pseudomonas. Stoichiometric amounts of ammonia were released during the cyanide containing culture by microbial oxidation of cyanide.     

Isolation and characterization of a cyanide-utilizing Burkholderia cepacia strain

A bacterium that utilizes cyanide as a nitrogen source was isolated from soil after enrichment in a liquid medium containing potassium cyanide (10mM) and glucose (1.0%, w/v). The strain could tolerate and grow in potassium cyanide at concentrations of up to 25mM. It could also utilize potassium cyanate, potassium thiocyanate, linamarin and a range of aliphatic and aromatic nitriles. The isolate was tentatively identified as Burkholderia cepacia strain C-3. Ammonia and formic acid were found in the culture supernatant of the strain grown on fructose and potassium cyanide, no formamide was detected, suggesting a hydrolytic pathway for the degradation of cyanide. The cyanide-degrading activity was higher in early and the stationary phase cells. Crude cell extracts of strain C-3 grown on nutrient broth exhibited cyanide-degrading activity. The characteristics of strain C-3 suggest that it would be useful in the bioremediation of cyanide-containing waste.     

Biodegradation of cyanide by Rhodococcus UKMP-5M

A new bacterial strain, Rhodococcus UKMP-5M isolated from petroleum-contaminated soils demonstrated promising potential to biodegrade cyanide to non-toxic end-products. Ammonia and formate were found as final products during growth of the isolate with KCN as the sole nitrogen source. Formamide was not detected as one of the end-products suggesting that the biodegradation of cyanide by Rhodococcus UKMP-5M may have proceeded via a hydrolytic pathway involving the bacterial enzyme cyanidase. No growth of the bacterium was observed when KCN was supplied as the sole source of carbon and nitrogen even though marginal reduction in the concentration of cyanide was recorded, indicating the toxic effect of cyanide even in cyanide-degrading microorganisms. The cyanide biodegradation ability of Rhodococcus UKMP-5M was greatly affected by the presence of organic nutrients in the medium. Medium containing glucose and yeast extract promoted the highest growth rate of the bacterium which simultaneously assisted complete biodegradation of 0.1 mM KCN within 24 hours of incubation. It was found that growth and cyanide biodegradation occurred optimally at 30°C and pH 6.3 with glucose as the preferred carbon source. Acetonitrile was used as an inducer to enhance cyanide biodegradation since the enzymes nitrile hydratase and/or nitrilase have similarity at both the amino acid and structural levels to that of cyanidase. The findings from this study should be of great interest from an environmental and health point of views since the optimum conditions discovered in the present study bear a close resemblance to the actual scenario of cyanide wastewater treatment facilities.     

Utilization of cyanide as nitrogenous substrate by Pseudomonas fluorescens NCIMB 11764: evidence for multiple pathways of metabolic conversion.

The growth of Pseudomonas fluorescens NCIMB 11764 on cyanide as the sole nitrogen source was accomplished by use of a modified fed-batch cultivation procedure. Previous studies showing that cyanide metabolism in this organism is both an oxygen-dependent and an inducible process, with CO2 and ammonia representing conversion products, were confirmed. However, washed cells (40 mg ml-1 [dry weight]) metabolized cyanide at concentrations far exceeding those previously described; 85% of 50 mM KCN was degraded in 6 h. In addition, two other C1 metabolites were detected in incubation mixtures; their identities were confirmed as formamide and formate by 13C nuclear magnetic resonance spectrocopy, high-pressure liquid chromatography, radioisotopic trapping experiments, and other analytical means. The relative yields of all four metabolites (CO2, formamide, formate, and ammonia) were shown to be dependent on the KCN concentration and availability of oxygen; at 0.5 to 10 mM substrate, CO2 was the major C1 product, whereas at 20 and 50 mM substrate, formamide and formate were principally formed. The latter two metabolites also accumulated during prolonged anaerobic incubation, suggesting that P. fluorescens NCIMB 11764 can elaborate several pathways of cyanide conversion. One is formally similar to that proposed previously (R. E. Harris and C. J. Knowles, FEMS Microbiol. Lett. 20:337-341, 1983), involving the oxygen-dependent conversion of cyanide to CO2 and ammonia. The other two, occurring in the presence or absence of oxygen, involve separate reactions to yield, respectively, formate plus ammonia or formamide.(ABSTRACT TRUNCATED AT 250 WORDS)     

Utilization of cyanide as nitrogenous substrate by Pseudomonas fluorescens NCIMB 11764: evidence for multiple pathways of metabolic conversion.

The growth of Pseudomonas fluorescens NCIMB 11764 on cyanide as the sole nitrogen source was accomplished by use of a modified fed-batch cultivation procedure. Previous studies showing that cyanide metabolism in this organism is both an oxygen-dependent and an inducible process, with CO2 and ammonia representing conversion products, were confirmed. However, washed cells (40 mg ml-1 [dry weight]) metabolized cyanide at concentrations far exceeding those previously described; 85% of 50 mM KCN was degraded in 6 h. In addition, two other C1 metabolites were detected in incubation mixtures; their identities were confirmed as formamide and formate by 13C nuclear magnetic resonance spectrocopy, high-pressure liquid chromatography, radioisotopic trapping experiments, and other analytical means. The relative yields of all four metabolites (CO2, formamide, formate, and ammonia) were shown to be dependent on the KCN concentration and availability of oxygen; at 0.5 to 10 mM substrate, CO2 was the major C1 product, whereas at 20 and 50 mM substrate, formamide and formate were principally formed. The latter two metabolites also accumulated during prolonged anaerobic incubation, suggesting that P. fluorescens NCIMB 11764 can elaborate several pathways of cyanide conversion. One is formally similar to that proposed previously (R. E. Harris and C. J. Knowles, FEMS Microbiol. Lett. 20:337-341, 1983), involving the oxygen-dependent conversion of cyanide to CO2 and ammonia. The other two, occurring in the presence or absence of oxygen, involve separate reactions to yield, respectively, formate plus ammonia or formamide.(ABSTRACT TRUNCATED AT 250 WORDS)     

Cyanide degradation by immobilized cells of Rhodococcus UKMP-5M

Anthropogenic sources contribute to the bulk presence of cyanide, which causes substantial health and environmental concerns. A petroleum-contaminated soil isolate, Rhodococcus UKMP-5M has been verified to efficiently degrade high concentration of cyanide in the form of KCN in our previous study. In order to enhance the cyanide-degrading ability of this bacterium, different encapsulation matrices were screened to immobilize cells of Rhodococcus UKMP-5M for degradation of cyanide. It was revealed that the biocatalyst activity and bead mechanical strength improved significantly when calcium alginate encapsulation technique was employed as compared to free cells. The results also indicated that the immobilized cell system could tolerate a higher level of KCN concentration and were able to support a higher biomass density. In addition, the embedded cells retained almost 96% of their initial cyanide removal efficiency during the first five batches and the entrapped cell system maintained 64% of its initial activity after eight successive batches. The encapsulated beads could be easily recovered from the production medium and reused for up to five batches without significant losses of cyanide-degrading ability, which proved to be advantageous from an economic point of view. From this study, it could be inferred that the novel Rhodococcus UKMP-5M strain demonstrated high cyanide-degrading ability and the optimized calcium alginate immobilization technique provided a promising alternative for practical application of large scale remediation of cyanide-bearing wastewaters.     

Application of cyanide hydrolase from Klebsiella sp. in a biosensor system for the detection of low-level cyanide

Abstract A partially purified preparation of cyanide hydrolase (cyanidase) from a bacterium, Klebsiella sp., was applied as a biocatalyst in a biosensor system for low-level cyanide detection. In the biosensor system cyanide hydrolase converts cyanide into formate and ammonia. The formate produced in the cyanide degradation was detected with a formate biosensor, in which formate dehydrogenase (FDH; E.C. 1.2.1.2) was co-immobilized with salicylate hydroxylase (SHL; E.C. 1.14.13.1) on a Clark electrode. The principle of the formate sensor is that FDH converts formate into carbon dioxide using -nicotinamide adenine dinucleotide hydrate (NAD⁺). The corresponding NADH produced is then oxidized to NAD⁺ by SHL using salicylate and oxygen. The oxygen consumption is monitored with the Clark electrode. The optimum buffer pH and temperature for the enzymatic hydrolysis of potassium cyanide were studied. The preliminary experiments including the pretreatment of cyanide with cyanide hydrolase and then detection by the formate sensor gave a detection limit at 7.3 mol l^–1 cyanide. The linear range of the calibration curve was between 30 mol l^–1 and 300 mol l^–1 cyanide.     

Cyanide bioremediation: the potential of engineered nitrilases

The cyanide-degrading nitrilases are of notable interest for their potential to remediate cyanide contaminated waste streams, especially as generated in the gold mining, pharmaceutical, and electroplating industries. This review provides a brief overview of cyanide remediation in general but with a particular focus on the cyanide-degrading nitrilases. These are of special interest as the hydrolysis reaction does not require secondary substrates or cofactors, making these enzymes particularly good candidates for industrial remediation processes. The genetic approaches that have been used to date for engineering improved enzymes are described; however, recent structural insights provide a promising new approach.

     

Cyanide Degradation under Alkaline Conditions by a Strain of Fusarium solani Isolated from Contaminated Soils

Several cyanide-tolerant microorganisms have been selected from alkaline wastes and soils contaminated with cyanide. Among them, a fungus identified as Fusarium solani IHEM 8026 shows a good potential for cyanide biodegradation under alkaline conditions (pH 9.2 to 10.7). Results of K(sup14)CN biodegradation studies show that fungal metabolism seems to proceed by a two-step hydrolytic mechanism: (i) the first reaction involves the conversion of cyanide to formamide by a cyanide-hydrolyzing enzyme, cyanide hydratase (EC 4.2.1.66); and (ii) the second reaction consists of the conversion of formamide to formate, which is associated with fungal growth. No growth occurred during the first step of cyanide degradation, suggesting that cyanide is toxic to some degree even in cyanide-degrading microorganisms, such as F. solani. The presence of organic nutrients in the medium has a major influence on the occurrence of the second step. Addition of small amounts of yeast extract led to fungal growth, whereas no growth was observed in media containing cyanide as the sole source of carbon and nitrogen. The simple hydrolytic detoxification pathway identified in the present study could be used for the treatment of many industrial alkaline effluents and wastes containing free cyanide without a prior acidification step, thus limiting the risk of cyanhydric acid volatilization; this should be of great interest from an environmental and health point of view.     

Development of an enzyme membrane reactor for treatment of cyanide-containing wastewaters from the food industry

Cyanidase, an immobilized enzyme preparation for hydrolyzing cyanide to ammonia and formate, was applied for the treatment of cyanide-containing waste waters from the food industry. Apricot seed extract was chosen as a model effluent. The enzymatic hydrolysis of pure amygdalin, the main cyanogenic glycoside in the extract, and the degradation of the cyanide formed was investigated and compared with the behavior of the real extract in a batch slurry reactor. A diffusional-type, flat-membrane reactor with immobilized cyanidase was developed, where the enzyme is effectively protected from adverse effects of high molecular components contained in the extract. For monitoring continuous-membrane reactor operation, a new unsegmented ammonia measurement system was developed and applied. In continuous operation the cyanidase retained its original activity for more than 400 hours on steam. (c) 1993 John Wiley & Sons, Inc.     

Formate dehydrogenase. Subunit and mechanism of inhibition by cyanide and azide.

Formate dehydrogenase (EC 1.2.1.2) prepared from peas (Pisum sativum) was a two-subunit enzyme. The enzyme accelerated the formation of an NAD+-cyanide compound having an adsorption band at 330 nm. The enzyme was able to bind one NAD+ molecule per each subunit but only 1 mole of NAD+-cyanide compound was formed per two subunits. The complex of NAD+, cyanide, and the enzyme was very stable and had no catalytic activity. Azide inhibited the formate dehydrogenase reaction in two different ways. By incubation of the enzyme with azide in the presence of NAD+, half of its catalytic activity was lost. The remaining activity was also inhibited by azide but this inhibition was removed competively by formate. Contrary to the case of cyanide the inhibition by azide could be removed by dialysis and no spectral species due to the addition compound of NAD+ and azide could be observed. The data from double recipricol plots of the initial velocity and the formate concentration led to a conclusion that formate dehydrogenase has two sites with about equal catalytic activity. The Km for formate was different for the two catalytic sites (1.67 and 6.25 mM) but the difference was not noticeable in the case of the Km for NAD+.     

Novel cyanide-hydrolyzing enzyme from Alcaligenes xylosoxidans subsp. denitrificans

A cyanide-metabolizing bacterium, strain DF3, isolated from soil was identified as Alcaligenes xylosoxidans subsp. denitrificans. Whole cells and cell extracts of strain DF3 catalyzed hydrolysis of cyanide to formate and ammonia (HCN + 2H2O----HCOOH + NH3) without forming formamide as a free intermediate. The cyanide-hydrolyzing activity was inducibly produced in cells during growth in cyanide-containing media. Cyanate (OCN-) and a wide range of aliphatic and aromatic nitriles were not hydrolyzed by intact cells of A. xylosoxidans subsp. denitrificans DF3. Strain DF3 hydrolyzed cyanide with great efficacy. Thus, by using resting induced cells at a concentration of 11.3 mg (dry weight) per ml, the cyanide concentration could be reduced from 0.97 M (approximately 25,220 ppm) to less than 77 nM (approximately 0.002 ppm) in 55 h. Enzyme purification established that cyanide hydrolysis by A. xylosoxidans subsp. denitrificans DF3 was due to a single intracellular enzyme. The soluble enzyme was purified approximately 160-fold, and the first 25 NH2-terminal amino acids were determined by automated Edman degradation. The molecular mass of the active enzyme (purity, greater than 97% as determined by amino acid sequencing) was estimated to be greater than 300,000 Da. The cyanide-hydrolyzing enzyme of A. xylosoxidans subsp. denitrificans DF3 was tentatively named cyanidase to distinguish it from known nitrilases (EC 3.5.5.1) which act on organic nitriles.     

Novel cyanide-hydrolyzing enzyme from Alcaligenes xylosoxidans subsp. denitrificans.

A cyanide-metabolizing bacterium, strain DF3, isolated from soil was identified as Alcaligenes xylosoxidans subsp. denitrificans. Whole cells and cell extracts of strain DF3 catalyzed hydrolysis of cyanide to formate and ammonia (HCN + 2H2O----HCOOH + NH3) without forming formamide as a free intermediate. The cyanide-hydrolyzing activity was inducibly produced in cells during growth in cyanide-containing media. Cyanate (OCN-) and a wide range of aliphatic and aromatic nitriles were not hydrolyzed by intact cells of A. xylosoxidans subsp. denitrificans DF3. Strain DF3 hydrolyzed cyanide with great efficacy. Thus, by using resting induced cells at a concentration of 11.3 mg (dry weight) per ml, the cyanide concentration could be reduced from 0.97 M (approximately 25,220 ppm) to less than 77 nM (approximately 0.002 ppm) in 55 h. Enzyme purification established that cyanide hydrolysis by A. xylosoxidans subsp. denitrificans DF3 was due to a single intracellular enzyme. The soluble enzyme was purified approximately 160-fold, and the first 25 NH2-terminal amino acids were determined by automated Edman degradation. The molecular mass of the active enzyme (purity, greater than 97% as determined by amino acid sequencing) was estimated to be greater than 300,000 Da. The cyanide-hydrolyzing enzyme of A. xylosoxidans subsp. denitrificans DF3 was tentatively named cyanidase to distinguish it from known nitrilases (EC 3.5.5.1) which act on organic nitriles.     

Oxidation of Carbon Monoxide in Cell Extracts of Pseudomonas carboxydovorans

Extracts of aerobically, CO-autotrophically grown cells of Pseudomonas carboxydovorans were shown to catalyze the oxidation of CO to CO(2) in the presence of methylene blue, pyocyanine, thionine, phenazine methosulfate, or toluylene blue under strictly anaerobic conditions. Viologen dyes and NAD(P)(+) were ineffective as electron acceptors. The same extracts catalyzed the oxidation of formate and of hydrogen gas; the spectrum of electron acceptors was identical for the three substrates, CO, formate, and H(2). The CO- and the formate-oxidizing activities were found to be soluble enzymes, whereas hydrogenase was membrane bound exclusively. The rates of oxidation of CO, formate, and H(2) were measured spectrophotometrically following the reduction of methylene blue. The rate of carbon monoxide oxidation followed simple Michaelis-Menten kinetics; the apparent K(m) for CO was 45 muM. The reaction rate was maximal at pH 7.0, and the temperature dependence followed the Arrhenius equation with an activation energy (DeltaH(0)) of 35.9 kJ/mol (8.6 kcal/mol). Neither free formate nor hydrogen gas is an intermediate of the CO oxidation reaction. This conclusion is based on the differential sensitivity of the activities of formate dehydrogenase, hydrogenase, and CO dehydrogenase to heat, hypophosphite, chlorate, cyanide, azide, and fluoride as well as on the failure to trap free formate or hydrogen gas in coupled optical assays. These results support the following equation for CO oxidation in P. carboxydovorans: CO + H(2)O --> CO(2) + 2 H(+) + 2e(-) The CO-oxidizing activity of P. carboxydovorans differed from that of Clostridium pasteurianum by not reducing viologen dyes and by a pH optimum curve that did not show an inflection point.