A microsatellite map of white clover

The white clover (Trifolium repens) nuclear genome (n=2x=16) is an important yet under-characterised genetic environment. We have developed simple sequence repeat (SSR) genetic markers for the white clover genome by mining an expressed sequence tag (EST) database and by isolation from enriched genomic libraries. A total of 2,086 EST-derived SSRs (EST-SSRs) were identified among 26,480 database accessions. Evaluation of 792 EST-SSR primer pairs resulted in 566 usable EST-SSRs. Of these, 335 polymorphic EST-SSRs, used in concert with 30 genomic SSRs, detected 493 loci in the white clover genome using 92 F₁ progeny from a pair cross between two highly heterozygous genotypes—364/7 and 6525/5. Map length, as estimated using the joinmap algorithm, was 1,144 cM and spanned all 16 homologues. The R (red leaf) locus was mapped to linkage group B1 and is tightly linked to the microsatellite locus prs318c. The eight homoeologous pairs of linkage groups within the white clover genome were identified using 96 homoeologous loci. Segregation distortion was detected in four areas (groups A1, D1, D2 and H2). Marker locus density varied among and within linkage groups. This is the first time EST-SSRs have been used to build a whole-genome functional map and to describe subgenome organisation in an allopolyploid species, and T. repens is the only Trifolieae species to date to be mapped exclusively with SSRs. This gene-based microsatellite map will enable the resolution of quantitative traits into Mendelian characters, the characterisation of syntenic relationships with other genomes and acceleration of white clover improvement programmes.     

First RFLP linkage map of red clover (<Emphasis Type="Italic">Trifolium pratense</Emphasis> L.) based on cDNA probes and its transferability to other red clover germplasm

We constructed a genetic linkage map of red clover (Trifolium pratense L., 2n=2x=14) using RFLP markers from cDNA probes of a backcrossed mapping population, and investigated the transferability of the markers to other red clover germplasm. The map contains 157 RFLP markers and one morphological marker on seven linkage groups. The total map distance was 535.7 cM and the average distance between two markers was 3.4 cM. All of the cDNA probes of the map were hybridized to the fragments of genomic DNA from 12 plants derived from three varieties, and 87% of the cDNA probes detected polymorphic bands that corresponded to those of mapping parents. This result indicated that RFLP markers on the present map were transferable to the genome analysis of other red clover germplasm. This is the first report to construct a linkage map of Trifolium species; it should provide fundamental and useful genetic information relevant to the breeding of red clover and genus Trifolium.Communicated by H.C. Becker     

The first genetic maps for subterranean clover (Trifolium subterraneum L.) and comparative genomics with T. pratense L. and Medicago truncatula Gaertn. to identify new molecular markers for breeding

This study reports on the construction of the first genetic maps of subterranean clover (Trifolium subterraneum L.), a diploid, inbreeding annual pasture legume, and alignment of its linkage groups with those of red clover (T. pratense L.) and Medicago truncatula Gaertn. Transferability of red and white clover (T. repens L.) simple sequence repeat (SSR) markers to subterranean clover was observed. A total of 343 SSR loci were mapped into eight subterranean clover linkage groups, with 6?C31 loci per linkage group and 27 loci with similar locations between two distinct F ₂ mapping populations. Phenotypic data obtained for flowering time, content of three isoflavonoids (formononetin, genistein and biochanin A), hardseededness, leaf markings, calyx pigmentation and hairiness of stems were analyzed, together with genotypic data. Genomic intervals influencing each trait were assigned to one to three chromosome regions, accounting for 5.5?C59.8% of the phenotypic variance. Syntenic relationships were observed among subterranean clover, red clover and Medicago truncatula genomes. Comparisons of loci shared between the three species indicated that at least two chromosomal regions have undergone duplications in the subterranean clover genome. Candidate genes for isoflavone content were identified using M. truncatula as a reference genome. Synteny-based segmentation observed in Brassicaceae chromosomes helped to account for the apparent segmental-based relationship between the clover genomes, particularly within the subterranean clover lines. The proposed segmental nature of clover genome could account for the extensive variation observed between the parental genotypes, while not preventing production of fertile intercrosses.     

Genetic linkage maps of white birches (<Emphasis Type="Italic">Betula platyphylla</Emphasis> Suk. and <Emphasis Type="Italic">B. pendula</Emphasis> Roth) based on RAPD and AFLP markers

A pseudo-testcross mapping strategy was used in combination with the random amplified polymorphism DNA (RAPD) and amplified fragment length polymorphism (AFLP) genotyping methods to develop two moderately dense genetic linkage maps for Betula platyphylla Suk. (Asian white birch) and B. pendula Roth (European white birch). Eighty F₁ progenies were screened with 291 RAPD markers and 451 AFLP markers. We selected 230 RAPD and 362 AFLP markers with 1:1 segregation and used them for constructing the parent-specific linkage maps. The resultant map for B. platyphylla was composed of 226 markers in 24 linkage groups (LGs), and spanned 2864.5 cM with an average of 14.3 cM between adjacent markers. The linkage map for B. pendula was composed of 226 markers in 23 LGs, covering 2489.7 cM. The average map distance between adjacent markers was 13.1 cM. Clustering of AFLP markers was observed on several LGs. The availability of these white birch linkage maps will contribute to the molecular genetics and the implementation of marker-assisted selection in these important forest species.     

Extensive macrosynteny between Medicago truncatula and Lens culinaris ssp. culinaris

The first predominantly gene-based genetic linkage map of lentil (Lens culinaris ssp. culinaris) was constructed using an F₅ population developed from a cross between the cultivars Digger (ILL5722) and Northfield (ILL5588) using 79 intron-targeted amplified polymorphic (ITAP) and 18 genomic simple sequence repeat (SSR) markers. Linkage analysis revealed seven linkage groups (LGs) comprised of 5–25 markers that varied in length from 80.2 to 274.6 cM. The genome map spanned a total length of 928.4 cM. Clear evidence of a simple and direct macrosyntenic relationship between lentil and Medicago truncatula was observed. Sixty-six out of the 71 gene-based markers, which were previously assigned to M. truncatula genetic and physical maps, were found in regions syntenic between the Lens c. ssp. culinaris and M. truncatula genomes. However, there was evidence of moderate chromosomal rearrangements which may account for the difference in chromosome numbers between these two legume species. Eighteen common SSR markers were used to connect the current map with the most comprehensive and recent map that exists for lentil, providing the syntenic context of four important domestication traits. The composite map presented, anchored with orthologous markers mapped in M. truncatula, provides a strong foundation for the future use of genomic and genetic information in lentil genetic analysis and breeding. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Validation of in silico-predicted genic SNPs in white clover (<Emphasis Type="Italic">Trifolium repens</Emphasis> L.), an outbreeding allopolyploid species

White clover (Trifolium repens L.) is an obligate outbreeding allotetraploid forage legume. Gene-associated SNPs provide the optimum genetic system for improvement of such crop species. An EST resource obtained from multiple cDNA libraries constructed from numerous genotypes of a single cultivar has been used for in silico SNP discovery and validation. A total of 58 from 236 selected sequence clusters (24.5%) were fully validated as containing polymorphic SNPs by genotypic analysis across the parents and progeny of several two-way pseudo-testcross mapping families. The clusters include genes belonging to a broad range of predicted functional categories. Polymorphic SNP-containing ESTs have also been used for comparative genomic analysis by comparison with whole genome data from model legume species, as well as Arabidopsis thaliana. A total of 29 (50%) of the 58 clusters detected putative ortholoci with known chromosomal locations in Medicago truncatula, which is closely related to white clover within the Trifolieae tribe of the Fabaceae. This analysis provides access to translational data from model species. The efficiency of in silico SNP discovery in white clover is limited by paralogous and homoeologous gene duplication effects, which are resolved unambiguously by the transmission test. This approach will also be applicable to other agronomically important cross-pollinating allopolyploid plant species. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users. N.O.I. Cogan and M.C. Drayton contributed equally to this work.     

An integrated SSR based linkage map for <Emphasis Type="Italic">Zoysia matrella</Emphasis> L. and <Emphasis Type="Italic">Z. japonica</Emphasis> Steud.

Japanese lawngrass (Zoysia japonica) and Manila grass (Z. matrella) are the two most important and commonly used Zoysia species. A consensus based SSR linkage map was developed for the genus by combining maps from each species. This used previously constructed maps for two Z. japonica populations and a new map from Z. matrella. The new SSR linkage map for Z. matrella was based on 86 F₂ individuals and contained 213 loci and covered a map distance of 1,351.2 cM in 32 linkage groups. Comparison of the three linkage maps constructed from populations with different genetic backgrounds indicated that most markers exhibited a consensus order, although some intervals or regions displayed discrepancy in marker orders or positions. The integrated map comprises 507 loci with a mean interval of 4.1 cM, covering a map distance of 2,066.6 cM in 22 linkage groups. The SSR-based map will allow marker-assisted selection and be useful for the mapping and cloning of economically important genes or quantitative trait loci.     

Development of SSR markers derived from SSR-enriched genomic library of eggplant (<Emphasis Type="Italic">Solanum melongena</Emphasis> L.)

Eggplant (Solanum melongena L.), also known as aubergine or brinjal, is an important vegetable in many countries. Few useful molecular markers have been reported for eggplant. We constructed simple sequence repeat (SSR)-enriched genomic libraries in order to develop SSR markers, and sequenced more than 14,000 clones. From these sequences, we designed 2,265 primer pairs to flank SSR motifs. We identified 1,054 SSR markers from amplification of 1,399 randomly selected primer pairs. The markers have an average polymorphic information content of 0.27 among eight lines of S. melongena. Of the 1,054 SSR markers, 214 segregated in an intraspecific mapping population. We constructed cDNA libraries from several eggplant tissues and obtained 6,144 expressed sequence tag (EST) sequences. From these sequences, we designed 209 primer pairs, 7 of which segregated in the mapping population. On the basis of the segregation data, we constructed a linkage map, and mapped the 236 segregating markers to 14 linkage groups. The linkage map spans a total length of 959.1 cM, with an average marker distance of 4.3 cM. The markers should be a useful resource for qualitative and quantitative trait mapping and for marker-assisted selection in eggplant breeding.     

Genetic map-based location of the red clover (Trifolium pratense L.) gametophytic self-incompatibility locus

Red clover is a hermaphroditic allogamous diploid (2n = 2x = 14) with a homomorphic gametophytic self-incompatibility (GSI) system (Trifolium pratense L.). Red clover GSI has long been studied, and it is thought that the genetic control of GSI constitutes a single locus. Although GSI genes have been identified in other species, the genomic location of the red clover GSI-locus remains unknown. The objective of this study was to use a mapping-based approach to identify simple sequence repeats (SSR) that were closely linked to the GSI-locus. Previously published SSR markers were used in this effort (Sato et al. in DNA Res 12:301–364, 2005). A bi-parental cross was initiated in which the parents were known to have one self-incompatibility allele (S-allele) in common. S-allele genotypes of 100 progeny were determined through test crosses and pollen compatibility. Pseudo F₁ linkage analysis isolated the GSI-locus on red clover linkage-group one within 2.5 cM of markers RCS5615, RCS0810, and RCS3161. A second 256 progeny mapping testcross population of a heterozygous self-compatible mutant revealed that this specific self-compatible mutant mapped to the same location as the GSI-locus. Finally, 82 genotypes were identified whose parents putatively shared one S-allele in common from maternal halfsib families derived from two random mating populations in which paternal identity was determined using molecular markers. Unique S-allele identity in the two random mating populations was tentatively inferred based on haplotypes of two highly allelic linkage-group one SSR (RCS0810 and RCS4956), which were closely linked to each other and the GSI-locus. Paternally derived pollen haplotype linkage analysis of RCS0810 and RCS4956 SSR and the GSI-locus again revealed tight linkage at 2.5 and 4.7 cM between the GSI-locus and RCS0810 and RCS4956, respectively. The map-based location of the GSI-locus in red clover has many immediate applications to red clover plant breeding and could be useful in helping to sequence the GSI-locus.     

Construction of genetic linkage map of the medicinal and ornamental plant <Emphasis Type="Italic">Catharanthus roseus</Emphasis>

An integrated genetic linkage map of the medicinal and ornamental plant Catharanthus roseus, based on different types of molecular and morphological markers was constructed, using a F₂ population of 144 plants. The map defines 14 linkage groups (LGs) and consists of 131 marker loci, including 125 molecular DNA markers (76 RAPD, 3 RAPD combinations; 7 ISSR; 2 EST-SSR from Medicago truncatula and 37 other PCR based DNA markers), selected from a total of 472 primers or primer pairs, and six morphological markers (stem pigmentation, leaf lamina pigmentation and shape, leaf petiole and pod size, and petal colour). The total map length is 1131.9 cM (centiMorgans), giving an average map length and distance between two markers equal to 80.9 cM and 8.6 cM, respectively. The morphological markers/genes were found linked with nearest molecular or morphological markers at distances varying from 0.7 to 11.4 cM. Linkage was observed between the morphological markers concerned with lamina shape and petiole size of leaf on LG1 and leaf, stem and petiole pigmentation and pod size on LG8. This is the first genetic linkage map of C. roseus.     

The genetic map of finger millet, Eleusine coracana

Restriction fragment length polymorphism (RFLP), amplified fragment length polymorphism (AFLP), expressed-sequenced tag (EST), and simple sequence repeat (SSR) markers were used to generate a genetic map of the tetraploid finger millet (Eleusine coracana subsp. coracana) genome (2n = 4x = 36). Because levels of variation in finger millet are low, the map was generated in an inter-subspecific F₂ population from a cross between E. coracana subsp. coracana cv. Okhale-1 and its wild progenitor E. coracana subsp. africana acc. MD-20. Duplicated loci were used to identify homoeologous groups. Assignment of linkage groups to the A and B genome was done by comparing the hybridization patterns of probes in Okhale-1, MD-20, and Eleusine indica acc. MD-36. E. indica is the A genome donor to E. coracana. The maps span 721 cM on the A genome and 787 cM on the B genome and cover all 18 finger millet chromosomes, at least partially. To facilitate the use of marker-assisted selection in finger millet, a first set of 82 SSR markers was developed. The SSRs were identified in small-insert genomic libraries generated using methylation-sensitive restriction enzymes. Thirty-one of the SSRs were mapped. Application of the maps and markers in hybridization-based breeding programs will expedite the improvement of finger millet. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Construction of a genetic linkage map in <Emphasis Type="Italic">Fenneropenaeus chinensis</Emphasis> (Osbeck) using RAPD and SSR markers

The primary genetic linkage maps of Fenneropenaeus chinensis (Osbeck) were constructed by using the “two-way pseudo-testcross” strategy with RAPD and SSR markers. Parents and F1 progeny were used as segregating populations. Sixty-one RAPD primers and 20 pairs of SSR primers were screened from 460 RAPD primers and 44 pairs of SSR primers. These primers were used to analyze the parents and 82 progeny of the mapping family. About 146 primers (128 RAPDs, 18 microsatellites) in the female and 127 primers (109 RAPDs, 18 microsatellites) in the male were segregating markers. The female linkage map included eight linkage groups, nine triplets and 14 doublets, spanning 1,173 cM with the average marker density of 11.28 cM, and the observed coverage was 59.36%. The male linkage map included 10 linkage groups, 12 triplets and seven doublets, spanning 1,144.6 cM with the average marker density of 12.05 cM, and the observed coverage was 62.01%. The construction of the F. chinensis genetic linkage maps here opened a new prospect for marker-assisted selection program, comparative genomics and quantitative trait loci (QTL) gene location and cloning.     

QTL analysis of seed yield components in red clover (Trifolium pratense L.)

Cultivars of red clover (Trifolium pratense L.), an important forage crop in temperate regions, are often characterised by an unsatisfactory level of seed yield, leading to high production costs. This complex trait is influenced by many components and negatively correlated with other important traits, such as forage yield or persistence. Therefore, seed yield has proven to be difficult to improve. Thus, the objectives of this study were to assess association among seed yield components and to provide the basis for identifying molecular markers linked to QTLs for seed yield components to assist breeding for improved red clover cultivars. A total of 42 SSR and 216 AFLP loci were used to construct a molecular linkage map with a total map length of 444.2 cM and an average distance between loci of 1.7 cM. A total of 38 QTLs were identified for eight seed yield components. The traits seed number per plant, seed yield per head, seed number per head, head number per plant and percent seed set were highly correlated with seed yield per plant, and QTLs for several of these traits were often detected in the same genome region. Head number per plant may present a particularly useful character for the improvement of seed yield since it can easily be determined before seed maturity. In addition, two genome regions containing four or five QTLs for different seed yield components, respectively, were identified representing candidate regions for further characterisation of QTLs. This study revealed several key components which may facilitate further improvement of seed yield. The QTLs identified represent an important first step towards marker-assisted breeding in red clover.     

An expressed sequence tag SSR map of tetraploid alfalfa (Medicago sativa L.)

A genetic map constructed from a population segregating for a trait of interest is required for QTL identification. The goal of this study was to construct a molecular map of tetraploid alfalfa (Medicago sativa.) using simple sequence repeat (SSR) markers derived primarily from expressed sequence tags (ESTs) and bacterial artificial chromosome (BAC) inserts of M. truncatula. This map will be used for the identification of drought tolerance QTL in alfalfa. Two first generation backcross populations were constructed from a cross between a water-use efficient, M. sativa subsp. falcata genotype and a low water-use efficient M. sativa subsp. sativa genotype. The two parents and their F₁ were screened with 1680 primer pairs designed to amplify SSRs, and 605 single dose alleles (SDAs) were amplified. In the F₁, 351 SDAs from 256 loci were mapped to 41 linkage groups. SDAs not inherited by the F₁, but transmitted through the recurrent parents and segregating in the backcross populations, were mapped to 43 linkage groups, and 44 of these loci were incorporated into the composite maps. Homologous linkage groups were joined to form eight composite linkage groups representing the eight chromosomes of M. sativa. The composite maps consist of eight composite linkage groups with 243 SDAs from M. truncatula EST sequences, 38 SDAs from M. truncatula BAC clone sequences, and five SDAs from alfalfa genomic SSRs. The total composite map length is 624 cM, with average marker density per composite linkage group ranging from 1.5 to 4.4 cM, and an overall average density of 2.2 cM. Segregation distortion was 10%, and distorted loci tended to cluster on individual homologues of several linkage groups. Electronic Supplementary Material Supplementary material is available for this article at     

Quantitative trait loci and candidate gene mapping of aluminum tolerance in diploid alfalfa

Aluminum (Al) toxicity in acid soils is a major limitation to the production of alfalfa (Medicago sativa subsp. sativa L.) in the USA. Developing Al-tolerant alfalfa cultivars is one approach to overcome this constraint. Accessions of wild diploid alfalfa (M. sativa subsp. coerulea) have been found to be a source of useful genes for Al tolerance. Previously, two genomic regions associated with Al tolerance were identified in this diploid species using restriction fragment length polymorphism (RFLP) markers and single marker analysis. This study was conducted to identify additional Al-tolerance quantitative trait loci (QTLs); to identify simple sequence repeat (SSR) markers that flank the previously identified QTLs; to map candidate genes associated with Al tolerance from other plant species; and to test for co-localization with mapped QTLs. A genetic linkage map was constructed using EST-SSR markers in a population of 130 BC₁F₁ plants derived from the cross between Al-sensitive and Al-tolerant genotypes. Three putative QTLs on linkage groups LG I, LG II and LG III, explaining 38, 16 and 27% of the phenotypic variation, respectively, were identified. Six candidate gene markers designed from Medicago truncatula ESTs that showed homology to known Al-tolerance genes identified in other plant species were placed on the QTL map. A marker designed from a candidate gene involved in malic acid release mapped near a marginally significant QTL (LOD 2.83) on LG I. The SSR markers flanking these QTLs will be useful for transferring them to cultivated alfalfa via marker-assisted selection and for pyramiding Al tolerance QTLs.     

Mapping 245 SSR markers on the <Emphasis Type="Italic">Vitis vinifera</Emphasis> genome: a tool for grape genetics

The aim of the present work was to develop a microsatellite marker-based map of the Vitis vinifera genome (n=19), useful for genetic studies in this perennial heterozygous species, as SSR markers are highly transferable co-dominant markers. A total of 346 primer pairs were tested on the two parents (Syrah and Grenache) of a full sib population of 96 individuals (S × G population), successfully amplifying 310 markers. Of these, 88.4% markers were heterozygous for at least one of the two parents. A total of 292 primer pairs were then tested on Riesling, the parent of the RS₁ population derived from selfing (96 individuals), successfully amplifying 299 markers among which 207 (62.9%) were heterozygous. Only 6.7% of the markers were homozygous in all three genotypes, stressing the interest of such markers in grape genetics. Four maps were constructed based on the segregation of 245 SSR markers in the two populations. The Syrah map was constructed from the segregations of 177 markers that could be ordered into 19 linkage groups (total length 1,172.2 cM). The Grenache map was constructed with the segregations of 178 markers that could be ordered into 18 linkage groups (total length 1,360.6 cM). The consensus S × G map was constructed with the segregations of 220 markers that were ordered into 19 linkage groups (total length 1,406.1 cM). One hundred and eleven markers were scored on the RS₁ population, among them 27 that were not mapped using the S × G map. Out of these 111 markers, 110 allowed to us to construct a map of a total length of 1,191.7 cM. Using these four maps, the genome length of V. vinifera was estimated to be around 2,200 cM. The present work allowed us to map 123 new SSR markers on the V. vinifera genome that had not been ordered in a previous SSR-based map (Riaz et al. 2004), representing an average of 6.5 new markers per linkage group. Any new SSR marker mapped is of great potential usefulness for many applications such as the transfer of well-scattered markers to other maps for QTL detection, the use of markers in specific regions for the fine mapping of genes/QTL, or for the choice of markers for MAS.     

A genetic map of <Emphasis Type="Italic">Lophopyrum ponticum</Emphasis> chromosome 7E,harboring resistance genes to Fusarium head blight and leaf rust

The leaf rust resistance gene Lr19 and Fusarium head blight (FHB) resistance quantitative trait loci (QTL) derived from the wild wheatgrass Lophopyrum ponticum have been located on chromosome 7E. The main objectives of the present study were to develop a genetic map of chromosome 7E and map the two resistance loci using a population of 237 F_7:8 recombinant inbred lines (RILs) derived from a cross between two Thatcher-L. ponticum substitution lines, K11463 (7el₁(7D)) and K2620 (7el₂(7D)). 532 G-SSR, E-SSR and STS markers from wheat chromosome group 7 were screened in the parent lines. Of these, 118 markers were polymorphic, with a polymorphism frequency of 22.2%. A genetic map of L. ponticum chromosome 7E was constructed with 64 markers, covering 95.76 cM, with an average genetic distance of 1.47 cM between markers. The major FHB resistance locus, temporarily assigned as FhbLoP, was mapped to the very distal region of the long arm of chromosome 7E within a 3.71 cM interval flanked by Xcfa2240 and Xswes19, which accounts for 30.46% of the phenotypic variance. Lr19 was bracketed by Xwmc273 and XBE404744, with a map distance of 1.54 and 1.43 cM from either side, respectively. The closely linked markers identified in this study will be helpful for marker-assisted introgression of the L. ponticum-derived FhbLoP and Lr19 genes into elite cultivars of wheat, and the development of a genetic map will accelerate the map-based cloning of these two genes.     

QTL Mapping for Frond Length and Width in Laminaria japonica Aresch (Laminarales, Phaeophyta) Using AFLP and SSR Markers

In Laminaria japonica Aresch breeding practice, two quantitative traits, frond length (FL) and frond width (FW), are the most important phenotypic selection index. In order to increase the breeding efficiency by integrating phenotypic selection and marker-assisted selection, the first set of QTL controlling the two traits were determined in F₂ family using amplified fragment length polymorphism (AFLP) and simple sequence repeat (SSR) markers. Two prominent L. japonicas inbred lines, one with “broad and thin blade” characteristics and another with “long and narrow blade” characteristics, were applied in the hybridization to yield the F₂ mapping population with 92 individuals. A total of 287 AFLP markers and 11 SSR markers were used to construct a L. japonica genetic map. The yielded map was consisted of 28 linkage groups (LG) named LG1 to LG28, spanning 1,811.1 cM with an average interval of 6.7 cM and covering the 82.8% of the estimated genome 2,186.7 cM. While three genome-wide significant QTL were detected on LG1 (two QTL) and LG4 for “FL,” explaining in total 42.36% of the phenotypic variance, two QTL were identified on LG3 and LG5 for the trait “FW,” accounting for the total of 36.39% of the phenotypic variance. The gene action of these QTL was additive and partially dominant. The yielded linkage map and the detected QTL can provide a tool for further genetic analysis of two traits and be potential for maker-assisted selection in L. japonica breeding.     

Genetic characterization and mapping of major gene resistance to potato leafroll virus in <Emphasis Type="Italic">Solanum</Emphasis><Emphasis Type="Italic">tuberosum</Emphasis> ssp. <Emphasis Type="Italic">andigena</Emphasis>

Major gene inheritance of resistance to Potato leafroll virus (PLRV) was demonstrated in a parthenogenic population derived from the highly resistant tetraploid andigena landrace, LOP-868. This major gene or chromosome region seems to control a single mechanism for resistance to infection and virus accumulation in this source. About 149 dihaploid lines segregated in a ratio of 107 resistant to 32 susceptible, fitting the expected ratio for inheritance of a duplex gene under random chromatid segregation. A tetraploid AFLP map was constructed using as reference the ultra high density (UHD) map. All AFLP markers associated with PLRV resistance mapped to the same linkage group. Map position was confirmed by analysis of previously-mapped SSR markers. Rl _adg is located on the upper arm of chromosome V, at 1 cM from its most closely linked AFLP marker, E35M48.192. This marker will be used to develop allele-specific primers or a pair of flanking PCR-based markers for their use in marker assisted selection.     

Molecular mapping for resistance to pea rust caused by <Emphasis Type="Italic">Uromyces fabae</Emphasis> (Pers.) de-Bary

Pea rust caused by Uromyces fabae (Pers.) de-Bary is a major problem in warm humid regions causing huge economic losses. A mapping population of 136 F_6:7 recombinant inbred lines (RILs) derived from the cross between pea genotypes, HUVP 1 (susceptible) and FC 1 (resistant) was evaluated in polyhouse as well as under field conditions during two consecutive years. Infection frequency (IF) and area under disease progress curve (AUDPC) were used for evaluation of rust reaction of the RILs. A linkage map was constructed with 57 polymorphic loci selected from 148 simple sequence repeats (SSRs), 3 sequence tagged sites (STS), and 2 random amplified polymorphic (RAPD) markers covering 634 cM of genetic distance on the seven linkage groups of pea with an average interval length of 11.3 cM. Composite interval mapping (CIM) revealed one major (Qruf) and one minor (Qruf1) QTL for rust resistance on LGVII. The LOD (5.2–15.8) peak for Qruf was flanked by SSR markers, AA505 and AA446 (10.8 cM), explaining 22.2–42.4% and 23.5–58.8% of the total phenotypic variation for IF and AUDPC, respectively. The minor QTL was environment-specific, and it was detected only in the polyhouse (LOD values 4.2 and 4.8). It was flanked by SSR markers, AD146 and AA416 (7.3 cM), and explained 11.2–12.4% of the total phenotypic variation. The major QTL Qruf was consistently identified across all the four environments. Therefore, the SSR markers flanking Qruf would be useful for marker-assisted selection for pea rust (U. fabae) resistance.