Mutation of active site residues in synthetic T4-lysozyme gene and their effect on lytic activity

The active site amino acids (Glu11 and Asp20) in T4-lysozyme have been mutated to their isosteric residues Gln or Asn and/or acidic residues such as Glu----Asp or Asp----Glu by the oligonucleotide-replacement method. Out of eight mutants so generated the mutant T4-lysozyme obtained from pTLY.Asp11 retains maximum amount of activity (approximately 16%), pTLY.Asn20 the least (0.9%) whereas pTLY.Gln11 lost completely. A systematic study of the active and inactive mutants thus generated supports the important role of Glu11 and Asp20 in T4-lysozyme activity as predicted in earlier studies.     

Fungal endophytes in potato roots studied by traditional isolation and cultivation-independent DNA-based methods

The composition and relative abundance of endophytic fungi in roots of field-grown transgenic T4-lysozyme producing potatoes and the parental line were assessed by classical isolation from root segments and cultivation-independent techniques to test the hypothesis that endophytic fungi are affected by T4-lysozyme. Fungi were isolated from the majority of root segments of both lines and at least 63 morphological groups were obtained with Verticillium dahliae, Cylindrocarpon destructans, Colletotrichum coccodes and Plectosporium tabacinum as the most frequently isolated species. Dominant bands in the fungal fingerprints obtained by denaturing gradient gel electrophoresis analysis of 18S rRNA gene fragments amplified from total community DNA corresponded to the electrophoretic mobility of the 18S rRNA gene fragments of the three most abundant fungal isolates, V. dahliae, C. destructans and Col. coccodes, but not to P. tabacinum. The assignment of the bands to these isolates was confirmed for V. dahliae and Col. coccodes by sequencing of clones. Verticillium dahliae was the most abundant endophytic fungus in the roots of healthy potato plants. Differences in the relative abundance of endophytic fungi colonizing the roots of T4-lysozyme producing potatoes and the parental line could be detected by both methods.     

Observation of a possible pause mutant in the total synthesis of T4 lysozyme

A DNA of 495 bp coding for T4-lysozyme was chemically synthesized and cloned in Escherichia coli. On DNA sequence analysis, clones pTLY.10 and pTLY.9 were identified to contain identical and complete T4-lysozyme coding sequences except that pTLY.9 had an additional 23 bp inverted repeat DNA at the 3'-end of the coding sequence. On expression and purification under similar conditions, T4-lysozymes from these two clones showed different degrees of retention time on HPLC as well as in the rate of enzymatic reaction. We speculate that this difference could be due to the generation of a pause mutant of T4-lysozyme in pTLY.9 under the influence of 3'-inverted repeat DNA that alters the rate of protein synthesis.     

Loss of translational entropy in molecular associations

Molecular associations in solution are opposed by the loss of entropy (DeltaS) that results from the restriction of motion of each component in the complex. Theoretical estimates of DeltaS are essential for rationalizing binding affinities, as well as for calculating entropic contribution to enzyme catalysis. Recently a statistical-mechanical framework has been proposed for estimating efficiently the translational entropy loss (DeltaS(trsl)), while taking explicitly into account the complex intermolecular interactions between the solute and the solvent. This framework relates the translational entropy of a solute in solution to its "free volume," defined as the volume accessible to the center of mass of the solute in the presence of the solvent and calculated by using an extension of the cell model (CM) for condensed phases. The translational entropy of pure water, estimated with the CM algorithm, shows good agreement with the experimental information. The free volume of various solutes in water, calculated within the CM by using molecular dynamics simulations with explicit solvent, displays a strong correlation with the solutes' polar and total surface areas. This correlation is used to propose a parameterization that can be used to calculate routinely the translational entropy of a solute in water. We also applied the CM formalism to calculate the free volume and translational entropy loss (DeltaS(trsl)) on binding of benzene to a cavity in a mutant T4-lysozyme. Our results agree with previously published estimates of the binding of benzene to this mutant T4-lysozyme. These and other considerations suggest that the cell model is a simple yet efficient theoretical framework to evaluate the translational entropy loss on molecular association in solution.     

Sensitivity improvement in 2D and 3D HCCH spectroscopy using heteronuclear cross-polarization

Summary A new method, which employs a sequence of heteronuclear-homonuclear-heteronuclear Hartmann-Hahn (HEHOHEHAHA) cross-polarization steps for obtaining through-bond H-C-C-H correlations in larger proteins (M_r > 15 kDa), is presented. The method has significantly higher sensitivity compared to INEPTHOHAHA-INEPT-based techniques. An additional feature of this experiment is that well-phaseable spectra may be obtained with a minimal (4-step) phase cycle and, consequently, experimental time can be utilized towards obtaining high resolution in indirect dimensions. Results from 2D and 3D HEHOHEHAHA experiments on T4-lysozyme are presented.     

Insertion of T4-lysozyme (T4L) can be a useful tool for studying olfactory-related GPCRs

The detergents used to solubilize GPCRs can make crystal growth the rate-limiting step in determining their structure. The Kobilka laboratory showed that insertion of T4-lysozyme (T4L) in the 3rd intracellular loop is a promising strategy towards increasing the solvent-exposed receptor area, and hence the number of possible lattice-forming contacts. The potential to use T4L with the olfactory-related receptors hOR17-4 and hVN1R1 was thus tested. The structure and function of native and T4L-variants were compared. Both receptors localized to the cell membrane, and could initiate ligand-activated signaling. Purified receptors not only had the predicted alpha-helical structures, but also bound their ligands canthoxal (M(W) = 178.23) and myrtenal (M(W) = 150.22). Interestingly, the T4L variants had higher percentages of soluble monomers compared to protein aggregates, effectively increasing the protein yield that could be used for structural and function studies. They also bound their ligands for longer times, suggesting higher receptor stability. Our results indicate that a T4L insertion may be a general method for obtaining GPCRs suitable for structural studies.     

Structure of oxidized bacteriophage T4 glutaredoxin (thioredoxin). Refinement of native and mutant proteins.

The structure of wild-type bacteriophage T4 glutaredoxin (earlier called thioredoxin) in its oxidized form has been refined in a monoclinic crystal form at 2.0 A resolution to a crystallographic R-factor of 0.209. A mutant T4 glutaredoxin gives orthorhombic crystals of better quality. The structure of this mutant has been solved by molecular replacement methods and refined at 1.45 A to an R-value of 0.175. In this mutant glutaredoxin, the active site residues Val15 and Tyr16 have been substituted by Gly and Pro, respectively, to mimic that of Escherichia coli thioredoxin. The main-chain conformation of the wild-type protein is similar in the two independently determined molecules in the asymmetric unit of the monoclinic crystals. On the other hand, side-chain conformations differ considerably between the two molecules due to heterologous packing interactions in the crystals. The structure of the mutant protein is very similar to the wild-type protein, except at mutated positions and at parts involved in crystal contacts. The active site disulfide bridge between Cys14 and Cys17 is located at the first turn of helix alpha 1. The torsion angles of these residues are similar to those of Escherichia coli thioredoxin. The torsion angle around the S-S bond is smaller than that normally observed for disulfides: 58 degrees, 67 degrees and 67 degrees for wild-type glutaredoxin molecule A and B and mutant glutaredoxin, respectively. Each sulfur atom of the disulfide cysteines in T4 glutaredoxin forms a hydrogen bond to one main-chain nitrogen atom. The active site is shielded from solvent on one side by the beta-carbon atoms of the cysteine residues plus side-chains of residues 7, 9, 21 and 33. From the opposite side, there is a cleft where the sulfur atom of Cys14 is accessible and can be attacked by a nucleophilic thiolate ion in the initial step of the reduction reaction.     

Atomic structure of a pyrimidine-dimer specific excision-repair enzyme from bacteriophage T4.

T4 endonuclease V is an enzyme responsible for the first step of a pyrimidine-dimer specific excision-repair process. The three-dimensional structure of this enzyme has been determined at 1.6A resolution by X-ray crystallography. The enzyme consists of one single compact domain classified into the all alpha structure. This single domain possesses two distinct catalytic activities, a pyrimidine-dimer glycosylase and an apurinic/apyrimidinic endonuclease. The backbone of the enzyme represents a unique folding scheme incompatible with close packing of alpha-helices. The refined structure suggests possible residues that participate in interactions with DNA.     

Preparation and characterization of an active lysozyme derivative: Kyn 62-lysozyme.

A novel method for the preparation of Kyn 62-lysozyme, in which tryptophan 62 is replaced by kynurenine, is reported. Hen egg-white lysozyme was ozonized in aqueous solution to yield one N'-formylkynurenine residue and deformylated with hydrochloric acid in frozen solution at -10 degrees C. Crude Kyn 62-lysozyme was purified by affinity and Bio Rex 70 chromatography successively. Kyn 62-lysozyme retains affinity for chitin and is essentially an active enzyme with a slightly weakened but distinct catalytic activity. After this modification, the enzyme activity was changed differently depending on the kind of substrate. At the individual optimum pH's, lytic activity was largely retained (80% active), but the catalytic efficiency for hydrolyzing glycol chitin was relatively low (30% active). Lysis of M. lysodeikticus cell suspensions was optimally catalyzed by Kyn 62-lysozyme at pH 6.2 and at 0.088 ionic strength. These values are lower by 1.3 pH unit and 0.04 ionic strength, respectively, than those of intact lysozyme. The optimum pH and ionic strength for the hydrolysis of neutral substrates were scarcely affected. These results suggest the significance of electrostatic interaction in the lysis of lysozyme. Relatively limited loss of activity induced by modification of the 62nd residue, which is thought to participate directly in the binding of the substrate at subsite C, is discussed on the basis of the similarity of side chain structure in tryptophan and kynurenine.     

One step engineering of T7-expression strains for protein production: increasing the host-range of the T7-expression system

The T7-expression system has been very useful for protein expression in Escherichia coli. However, it is often desirable to over-express proteins in species other than E. coli. Here, we constructed an inducible broad-host-range T7-expression transposon, which allows simple one-step construction of T7-expression strains in various species, providing the option to over-express proteins of interest in a broader host-range. This transposon contains the T7 RNA polymerase driven by the lacUV5 promoter, which is repressed by the lac-repressor. Leaky expression is prevented by the presence of T7-lysozyme on this construct. The complete T7-expression system is flanked by mariner transposon repeats of the suicidal R6Kgammaori plasmid, pBT20-Deltabla. Stable integration of the whole system is possible by a one-step selection for a Flp-excisable Gm(R)-marker. We showed the engineering of E. coli, Pseudomonas aeruginosa, Erwinia carotovora, Salmonella choleraesuis, Agrobacterium tumefaciens, and Chromobacterium violaceum strains with this construct and demonstrated the expression of the Burkholderia pseudomallei Asd protein in these hosts, by induction with isopropyl-beta-d-thiogalactopyranoside (IPTG).     

Aqueous two-phase systems containing urea: influence of protein structure on protein partitioning

During recombinant E. coli fermentation with high-expression levels inclusion bodies are often formed. Aqueous two-phase systems have been successfully used in the presence of urea for the initial recovery step of inclusion bodies from E. coli. Basic studies of the complex interactions are lacking. For a systematic study of protein partitioning in the presence of urea we selected T4-lysozyme mutants with different thermal stability as a model. The stabilization of these variants by phase components was investigated measuring the fluorescence emission of tryptophan residues in the protein. Protein structure was stabilized at pH 7 in the order of S0(4)(2-) > PEG = Dextran > H(2)O. The conformation of proteins was shown to have a strong influence on the partitioning in aqueous two-phase systems. Tryptophan and its homologuous di- and tripeptdides were partitioned in similar phase systems to normalize for contribution from hydrophobic interactions.     

X-ray analysis of the single chain B29-A1 peptide-linked insulin molecule. A completely inactive analogue.

A crystal structure of a totally inactive insulin molecule has been determined. For this insulin molecule, the first without detectable activity to be characterized, the A and B-chains are linked by a peptide bond between A1 Gly and B29 Lys. The molecule has retained all its normal self-association properties and it can also accommodate the two different conformations designated T and R, as seen in 4Zn native pig insulin crystals. The hexamers of the crosslinked insulin molecule were crystallized using the 4Zn insulin recipe of Schlichtkrull. The structure has been crystallographically refined with data extending to 2 A using restrained least-square methods. Comparison of the B29-A1 peptide crosslink insulin and the 4Zn native insulin reveals close structural similarities with the native dimer. The analysis of the structure confirms the earlier hypothesis that insulin structures in crystals are not in an active conformation and that a separation of N-terminal A-chain and C-terminal B-chain is required for interaction with the insulin receptor.     

Bacteriolytic enzyme induced from pyocinogenic Pseudomonas aeruginosa. Purification and characterization of PR1-lysozyme.

A bacteriolytic enzyme, PR1-lysozyme, has been purified from the lysate of mitomycin C-induced pyocinogenic Pseudomonas aeruginosa, by acrinol treatment, Amberlite CG-50 chromatography, ammonium sulfate fractionation, Sephadex G-100 gel filtration and two cycles of SP-Sephadex C-50 chromatography. Homogeneity of the preparation was demonstrated by three electrophoretic techniques. PR1-lysozyme is a basic protein (pI, 9.4) and consists of a single polypeptide chain having a molecular weight of 24,000. The amino acid composition of the protein was analyzed, and no cystein residue was found among more than 210 amino acid residues. The optimum pH for enzymatic activity was 6.4 and the enzyme exhibited about 50 to 70 times greater specific activity than hen egg-white lysozyme when assayed with chloroform-killed P. aeruginosa as a substrate. By analyzing the products of enzymatic action on purified peptidoglycan of P. aeruginosa, the enzyme was identified as an N-acetylmuramidase, i.e., the same classification as hen-egg-white lysozyme. PR1-lysozyme did not show any activity towards intact cells of gram-positive and gram-negative bacteria tested. However, the enzyme was able to lyse chloroform-killed gram-negative and gram-positive bacteria.     

Rates of structural fluctuations of lysozyme in the range of thermal unfolding transition

The hydrogen–deuterium exchange reaction for the tryptophan residues in lysozyme have been followed in 4.5M LiBr at pH 7.2 in the temperature range of the unfolding transition by measuring the transmittance change at 293 nm. The exchange reaction proceeded in three phases at low temperature for native protein. The first and the second phases were ascribed to the H-D exchange reactions of three relatively exposed tryptophan residues on the molecular surface. The third phase corresponded to the H-D exchange reaction of the three tryptophan residues buried in the interior of the molecule. The H-D exchange reaction proceeded in two phases near the melting temperature and in a single phase at high temperature, where almost all molecules are unfolded. The H-D exchange of three tryptophan residues buried in folded molecules was caused by fluctuation between the folded and unfolded structure of the protein molecule. The rates of such a fluctuation were determined from the rates of the exchange reaction at various temperatures. These rates agreed very well with those determined from the temperature-jump method. This means that a protein molecule in solution fluctuates between the N- and D-states at every temperature within the transition region, where the N-form is the tightly folded native structure and the D-form the randomly coiled chain. From measurements of thermal unfolding of ester-108-lysozyme and the binding constant of (NAG)₃ to ester-108-lysozyme, it was found that almost all cross-linked molecules are in the folded state near 50°C and pH 7.2 in 4.5M LiBr, where intact molecules are unfolded. We also studied the H-D exchange reaction of ester-108-lysozyme. In the temperature region of 43–50°C, about 70% of the exchangeable tryptophan residues of ester-108-lysozyme were exchanged within 1 s immediately after the mixing of D₂O, in spite of the fact that almost all molecules are in the folded state. This was considered the premelting of the surface of a corss-linked molecule.     

Comparison of the crystal structure of bacteriophage T4 lysozyme at low, medium, and high ionic strengths

Crystals of bacteriophage T4 lysozyme used for structural studies are routinely grown from concentrated phosphate solutions. It has been found that crystals in the same space group can also be grown from solutions containing 0.05 M imidazole chloride, 0.4 M sodium choride, and 30% polyethylene glycol 3500. These crystals, in addition, can also be equilibrated with a similar mother liquor in which the sodium chloride concentration is reduced to 0.025 M. The availability of these three crystal variants has permitted the structure of T4 lysozyme to be compared at low, medium, and high ionic strength. At the same time the X-ray structure of phage T4 lysozyme crystallized from phosphate solutions has been further refined against a new and improved X-ray diffraction data set. The structures of T4 lysozyme in the crystals grown with polyethylene glycol as a precipitant, regardless of the sodium chloride concentration, were very similar to the structure in crystals grown from concentrated phosphate solutions. The main differences are related to the formation of mixed disulfides between cysteine residues 54 and 97 and 2-mercaptoethanol, rather than to the differences in the salt concentration in the crystal mother liquor. Formation of the mixed disulfide at residue 54 resulted in the displacement of Arg-52 and the disruption of the salt bridge between this residue and Glu-62. Other than this change, no obvious alterations in existing salt bridges in T4 lysozyme were observed. Neither did the reduction in the ionic strength of the mother liquor result in the formation of new salt bridge interactions. These results are consistent with the ideas that a crystal structure determined at high salt concentrations is a good representation of the structure at lower ionic strengths, and that models of electrostatic interactions in proteins that are based on crystal structures determined at high salt concentrations are likely to be relevant at physiological ionic strengths.     

De novo high-resolution protein structure determination from sparse spin-labeling EPR data

As many key proteins evade crystallization and remain too large for nuclear magnetic resonance spectroscopy, electron paramagnetic resonance (EPR) spectroscopy combined with site-directed spin labeling offers an alternative approach for obtaining structural information. Such information must be translated into geometric restraints to be used in computer simulations. Here, distances between spin labels are converted into distance ranges between beta carbons by using a "motion-on-a-cone" model, and a linear-correlation model links spin-label accessibility to the number of neighboring residues. This approach was tested on T4-lysozyme and alphaA-crystallin with the de novo structure prediction algorithm Rosetta. The results demonstrate the feasibility of obtaining highly accurate, atomic-detail models from EPR data by yielding 1.0 A and 2.6 A full-atom models, respectively. Distance restraints between amino acids far apart in sequence but close in space are most valuable for structure determination. The approach can be extended to other experimental techniques such as fluorescence spectroscopy, substituted cysteine accessibility method, or mutational studies.     

Structural consequences of effector binding to the T state of aspartate carbamoyltransferase: crystal structures of the unligated and ATP- and CTP-complexed enzymes at 2.6-A resolution

The crystal structure of Escherichia coli aspartate carbamoyltransferase complexed with adenosine 5'-triphosphate (ATP) has been solved by molecular replacement and has been refined to a crystallographic residual of 0.17 at 2.6-A resolution by using the computer program X-PLOR. The unit cell dimensions of this crystal form are a = b = 122.2 A and c = 143.3 A and the space group is P321. Although the c-axis unit cell dimension is approximately 1 A longer than the corresponding dimension of the CTP-ligated P321 crystal form (c = 142.2 A), the ATP-ligated enzyme adopts a T-like quaternary structure. The base moiety of ATP interacts with residues Glu10, Ile12, and Lys60 while the ribose is near Asp19 and Lys60; the triphosphate entity is bound to Lys94, although His20 and Arg96 are nearby. We observe a higher occupancy for ATP in the allosteric site of the R1 regulatory chain in comparison to the occupancy of the R6 allosteric site. These crystallographically independent sites are related by a molecular 2-fold axis. There are other violations of the noncrystallographic symmetry that are similar to those observed in the refined CTP-ligated aspartate carbamoyltransferase structure. These infringements on the molecular symmetry might be the result of intermolecular interactions in the crystal. To ensure the most meaningful comparison with the ATP-ligated structure, we refined the previously reported CTP-bound and unligated structures to crystallographic residuals between 0.17 and 0.18 using X-PLOR. These X-PLOR refined structures are not significantly different from the initial structures that had been crystallographically refined by a restrained least-squares method. After making all possible comparisons between the CTP- and ATP-ligated and the unligated T-state structures, we find that the most significant differences are located at the allosteric sites and in small changes in the quaternary structures. At the allosteric site, the binding of CTP and ATP successively enlarges the nucleotide binding cavity, particularly in the vicinity of the base. The changes in the quaternary structure can be characterized by an increase in the separation of the catalytic trimers by approximately 0.5 A as ATP binds to the unligated T structure. On the basis of these structural studies, we discuss the relationships between the conformational differences in the allosteric site and the small changes in the quaternary structure within the T form to the possible mechanisms for CTP inhibition and ATP activation.     

Crystal structure of human micro-crystallin complexed with NADPH

Human cytosolic 3,5,3'-triiodo-L-thyronine-binding protein, also called mu-crystallin or CRYM, plays important physiological roles in transporting 3,5,3'-triiodo-L-thyronine (T(3)) into nuclei and regulating thyroid-hormone-related gene expression. The crystal structure of human CRYM's bacterial homolog Pseudomonas putida ornithine cyclodeaminase and Archaeoglobus fulgidus alanine dehydrogenase have been available, but no CRYM structure has been reported. Here, we report the crystal structure of human CRYM bound with NADPH refined to 2.6 A, and there is one dimer in the asymmetric unit. The structure contains two domains: a Rossmann fold-like NADPH-binding domain and a dimerization domain. Different conformations of the loop Arg83-His92 have been observed in two monomers of human CRYM in the same asymmetric unit. The peptide bond of Val89-Pro90 is a trans-configuration in one monomer but a cis-configuration in the other. A detailed comparison of the human mu-crystallin structure with its structurally characterized homologs including the overall comparison and superposition of active sites was conducted. Finally, a putative T(3)-binding site in human CRYM is proposed based on comparison with structural homologs.     

Site-specific 13C-labeling of Trp 62 in hen egg-white lysozyme: preparation and 13C-NMR titration of [delta 1-13C]Trp 62-lysozyme.

The indole C-2(delta 1) carbon of Trp 62 in hen egg-white lysozyme was selectively labeled with 13C through a series of reactions involving N'-formylkynurenine 62-lysozyme with K13CN, NaBH4-reduction, and acid-catalyzed dehydration. [delta 1-13C]Trp 62-lysozyme in which Trp 62 is labeled with 90% 13C has the same chemical and enzymatic properties as the native protein. The reverted lysozyme gave a single 13C-NMR signal at 125 ppm. pH-titration of the 13C signal indicated a transition at pH 3.9 for the free enzyme. In the presence of (GlcNAc)3, the resonance signals were shifted 0.5-1 ppm upfield, and the transitions in the titration curve were observed at pH 3.9 and 6.5. Asp 52 and Glu 35 were assigned to the groups with pKas of 3.9 and 6.5, respectively. In [2-13C]AHT 62-lysozyme, which has 3-(2-amino-3-hydroxy-3H-[2-13C]indol-3-yl)alanine (AHT) at position 62, AHT 62 behaved quite differently from Trp 62 on pH-titration of the 13C-label. These results suggest that a conformational change around Trp 62 is induced upon ionization of the catalytic residue and that the structural flexibility of the side chain of this aromatic residue in the substrate binding site is closely related to the function of lysozyme.