An Experimental Study of Hafting Adhesives and the Implications for Compound Tool Technology

Experimental studies of hafting adhesives and modifications to compound tool components can demonstrate the extent to which human ancestors understood and exploited material properties only formally defined by science within the last century. Discoveries of Stone Age hafting adhesives at archaeological sites in Europe, the Middle East, and Africa have spurred experiments that sought to replicate or create models of such adhesives. Most of these studies, however, have been actualistic in design, focusing on replicating ancient applications of adhesive technology. In contrast, this study tested several glues based on Acacia resin within a materials science framework to better understand the effect of each adhesive ingredient on compound tool durability. Using an overlap joint as a model for a compound tool, adhesives formulated with loading agents from a range of particle sizes and mineral compositions were tested for toughness on smooth and rough substrates. Our results indicated that overlap joint toughness is significantly increased by using a roughened joint surface. Contrary to some previous studies, there was no evidence that particle size diversity in a loading agent improved adhesive effectiveness. Generally, glues containing quartz or ochre loading agents in the silt and clay-sized particle class yielded the toughest overlap joints, with the effect of particle size found to be more significant for rough rather than smooth substrate joints. Additionally, no particular ochre mineral or mineral mixture was found to be a clearly superior loading agent. These two points taken together suggest that Paleolithic use of ochre-loaded adhesives and the criteria used to select ochres for this purpose may have been mediated by visual and symbolic considerations rather than purely functional concerns.     

Evidence of hunting and hafting during the Middle Stone Age at Sibidu Cave, KwaZulu-Natal, South Africa: a multianalytical approach

Points and point fragments from Middle Stone Age layers (dated to between 50,000 and 60,000 years ago) from Sibudu Cave, KwaZulu-Natal, South Africa, were examined to establish whether they were used as hafted spearheads for hunting. A multi-analytical approach was followed, using macrofracture analysis, use-wear analysis, and residue analysis. In addition to the analytical processes, an experimental project tested the results of the macrofracture analysis on local raw materials. The study shows that points from Sibudu Cave were indeed hafted and used as hunting tools. It was further established that plant twine was probably the preferred binding material to attach the points to wooden hafts. Resin may have been used as an adhesive in combination with the binding material. A detailed examination of the ochre distribution on the points confirmed that ochre was also part of the hafting arrangement. The need to use a dependable methodology for the recognition of hunting and hafting traces on stone points from the southern African Middle Stone Age context is briefly discussed.     

The gripping nature of ochre: the association of ochre with Howiesons Poort adhesives and Later Stone Age mastics from South Africa

This contribution provides direct evidence for the use of ochre in adhesive recipes during the Howiesons Poort of South Africa. Stone segments from two KwaZulu-Natal sites were microscopically analyzed to document ochre and resin microresidue occurrences. These microresidues show a clear distribution pattern on the tool portions that are associated with hafting. Results from a separate quartz and crystal-quartz sample may indicate that different adhesive recipes were applied to different raw materials. A possible functional application for ochre in association with Later Stone Age mastics is also explored. The evidence and suggestions presented here expand our understanding of the versatility, use, and value of pigmentatious materials in prehistory; it is not viewed as an alternative or replacement hypothesis for its possible symbolic role during the late Pleistocene.     

Middle Stone Age Ochre Processing and Behavioural Complexity in the Horn of Africa: Evidence from Porc-Epic Cave,Dire Dawa,Ethiopia

Ochre is a common feature at Middle Stone Age (MSA) sites and has often been interpreted as a proxy for the origin of modern behaviour. However, few ochre processing tools, ochre containers, and ochre-stained artefacts from MSA contexts have been studied in detail within a theoretical framework aimed at inferring the technical steps involved in the acquisition, production and use of these artefacts. Here we analyse 21 ochre processing tools, i.e. upper and lower grindstones, and two ochre-stained artefacts from the MSA layers of Porc-Epic Cave, Dire Dawa, Ethiopia, dated to ca. 40 cal kyr BP. These tools, and a large proportion of the 4213 ochre fragments found at the site, were concentrated in an area devoted to ochre processing. Lower grindstones are made of a variety of raw materials, some of which are not locally available. Traces of use indicate that different techniques were employed to process ochre. Optical microscopy, XRD, μ-Raman spectroscopy, and SEM-EDS analyses of residues preserved on worn areas of artefacts show that different types of ferruginous rocks were processed in order to produce ochre powder of different coarseness and shades. A round stone bearing no traces of having been used to process ochre is half covered with residues as if it had been dipped in a liquid ochered medium to paint the object or to use it as a stamp to apply pigment to a soft material. We argue that the ochre reduction sequences identified at Porc-Epic Cave reflect a high degree of behavioural complexity, and represent ochre use, which was probably devoted to a variety of functions.     

Aspects of tool production, use, and hafting in Palaeolithic assemblages from Northeast Africa

A detailed microwear study was performed on several assemblages from Northeast Africa to provide an anthropological scenario of late middle and upper Pleistocene populations in the Nile Valley and adjacent zones. Results are presented from the wear analysis of five sites, and an interpretation is provided of the keystones of MSA behaviour and its evolution throughout about 150,000 years. Locally available raw materials were predominantly used. Different tool uses were identified based on wear evidence, and it was demonstrated that stone tools were hafted from at least the early MSA onwards. In particular stone tools for which hafting was a necessity for their use, such as percussion implements and projectiles, were hafted. Both tool functions remain important throughout the Middle Stone Age. For tools with other uses, such as knives, hafting was demonstrated in certain cases. Hafting proved to be integrated into the stone tool production process, indicating a certain degree of anticipation and planning. Ochre was present at most of the sites in different forms, and mainly seems to have served a utilitarian function, and a possible symbolic use. The included sites could be interpreted as specialised sites, and in all but one case were situated in a production context. The evidence indicates the existence of a regional settlement system with different logistic nodes.     

Evaluating the Photoprotective Effects of Ochre on Human Skin by In Vivo SPF Assessment: Implications for Human Evolution,Adaptation and Dispersal

Archaeological indicators of cognitively modern behaviour become increasingly prevalent during the African Middle Stone Age (MSA). Although the exploitation of ochre is viewed as a key feature of the emergence of modern human behaviour, the uses to which ochre and ochre-based mixtures were put remain ambiguous. Here we present the results of an experimental study exploring the efficacy of ochre as a topical photoprotective compound. This is achieved through the in vivo calculation of the sun protection factor (SPF) values of ochre samples obtained from Ovahimba women (Kunene Region, Northern Namibia) and the Palaeozoic Bokkeveld Group deposits of the Cape Supergroup (Western Cape Province, South Africa). We employ visible spectroscopy, energy-dispersive X-ray fluorescence (ED-XRF), X-ray diffraction (XRD) and granulometric analyses to characterise ochre samples. The capacity of ochre to inhibit the susceptibility of humans to the harmful effects of exposure to ultraviolet radiation (UVR) is confirmed and the mechanisms implicated in the efficacy of ochre as a sunscreen identified. It is posited that the habitual application of ochre may have represented a crucial innovation for MSA humans by limiting the adverse effects of ultraviolet exposure. This may have facilitated the colonisation of geographic regions largely unfavourable to the constitutive skin colour of newly arriving populations.     

Extending the chronology of deposits at Blombos Cave, South Africa, back to 140 ka using optical dating of single and multiple grains of quartz

Optically stimulated luminescence (OSL) measurements are reported for both single aliquots (of two different sizes) and single grains of quartz from deposits within Blombos Cave. Ages have been obtained for six sediments from the Middle Stone Age (MSA) occupation levels and for two sterile sands, one underlying the archaeological sediment and one overlying the Later Stone Age occupation levels. The ages for the archaeological sediments were obtained from single-grain measurements that enabled unrepresentative grains to be rejected. The MSA occupation levels have ages that, within error limits, are in stratigraphic order and fall between the OSL age for the oldest dune sand (143.2+/-5.5 ka) and a previously published OSL age for the sterile sand ( approximately 70 ka) that separates the Middle and Later Stone Age deposits. The earliest MSA archaeological phase, M3, from where fragments of ochre were found as well as human teeth, is dated to 98.9+/-4.5 ka, coinciding with the sea-level high of oxygen isotope substage 5c. The cave then appears to be unoccupied until oxygen isotope substage 5a on the basis of four OSL ages for archaeological phase M2, ranging from 84.6+/-5.8 to 76.8+/-3.1 ka; these levels contained large hearths and bone tools. An age of 72.7+/-3.1 ka was obtained for the final MSA archaeological phase, M1, from which deliberately engraved ochre and shell beads were recovered along with bifacial stone points. We conclude that the periods of occupation were determined by changes in sea level, with abundant sources of seafood available in times of high sea level and with the cave being closed by the accumulation of large dunes during periods of low sea level, such as during oxygen isotope stages 4 and 6.     

A Milk and Ochre Paint Mixture Used 49,000 Years Ago at Sibudu,South Africa

Gas chromatography/mass spectrometry, proteomic and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM/EDS) analyses of residue on a stone flake from a 49,000 year-old layer of Sibudu (South Africa) indicate a mixture of ochre and casein from milk, likely obtained by killing a lactating wild bovid. Ochre powder production and use are documented in Middle Stone Age South African sites but until now there has been no evidence of the use of milk as a binder. Our analyses show that this ochre-based mixture was neither a hafting adhesive nor a residue left after treating animal skins, but a liquid mixture consisting of a powdered pigment mixed with milk; in other words, a paint medium that could have been applied to a surface or to human skin. The significance of our finds also lies in the fact that it establishes the antiquity of the use of milk as a binder well before the introduction of domestic cattle in South Africa in the first millennium AD.     

An assessment of the impact of hafting on Paleoindian point variability

It has long been argued that the form of North American Paleoindian points was affected by hafting. According to this hypothesis, hafting constrained point bases such that they are less variable than point blades. The results of several studies have been claimed to be consistent with this hypothesis. However, there are reasons to be skeptical of these results. None of the studies employed statistical tests, and all of them focused on points recovered from kill and camp sites, which makes it difficult to be certain that the differences in variability are the result of hafting rather than a consequence of resharpening. Here, we report a study in which we tested the predictions of the hafting hypothesis by statistically comparing the variability of different parts of Clovis points. We controlled for the potentially confounding effects of resharpening by analyzing largely unused points from caches as well as points from kill and camp sites. The results of our analyses were not consistent with the predictions of the hypothesis. We found that several blade characters and point thickness were no more variable than the base characters. Our results indicate that the hafting hypothesis does not hold for Clovis points and indicate that there is a need to test its applicability in relation to post-Clovis Paleoindian points.     

Traditional Glue,Adhesive and Poison Used for Composite Weapons by Ju/’hoan San in Nyae Nyae,Namibia. Implications for the Evolution of Hunting Equipment in Prehistory

Ju/’hoan hunters from Nyae Nyae, near Tsumkwe in Namibia, demonstrate the manufacture of three fixative pastes made from plant extracts, and poison made from grubs and plant extracts. Ammocharis coranica and Terminalia sericea produce simple glue. Ozoroa schinzii latex mixed with carbonized Aristeda adscensionis grass is a compound adhesive. Composite poison is made from Chrysomelid grub viscera mixed with salivary extracts of Acacia mellifera inner bark and the tuber sap of Asparagus exuvialis. In order to document potential variability in the chaîne opératoire, and to eliminate inherent biases associated with unique observations, we studied manufacturing processes in three separate Nyae Nyae villages. Although there are methodological similarities in the Nyae Nyae area, we observed a few differences in contemporary traditions of poison manufacture. For example, some hunters make powder from Asparagus exuvialis tuber sap by boiling, reducing, hardening and grinding it, while others simply use heated sap. The Ju/’hoan hunting kit provides insights for archaeologists, but we must exercise caution when looking for continuity between prehistoric and historical technical systems. Some traditions have been lost to modern hunters, while others are new. We should also expect variability in the Stone Age because of geographically restricted resources. Simple glue, compound adhesive, and poison recipes identified in the Stone Age have no modern equivalents. By about 60,000 years ago at Diepkloof, simple glue was used for hafting tools, but at similarly-aged Sibudu there are recipes that combine red ochre powder with plant and/or animal ingredients. At Border Cave, novel poisons and compound adhesives were used in the Early Later Stone Age. It is possible that the complexity that we record in the manufacture of fixative pastes and poison used by Ju/’hoan hunters represents a hafting system both similar to and different from that observed at the Stone Age sites of Diepkloof, Sibudu, and Border Cave.     

40Ar/(39)Ar dating of the Kapthurin Formation, Baringo, Kenya.

The(40)Ar/(39)Ar radiometric dating technique has been applied to tuffs and lavas of the Kapthurin Formation in the Tugen Hills, Kenya Rift Valley. Two variants of the(40)Ar/(39)Ar technique, single-crystal total fusion (SCTF) and laser incremental heating (LIH) have been employed to date five marker horizons within the formation: near the base, the Kasurein Basalt at 0.61+/-0.04 Ma; the Pumice Tuff at 0.543+/-0.004 Ma; the Upper Kasurein Basalt at 0.552+/-0.015 Ma; the Grey Tuff at 0.509+/-0.009 Ma; and within the upper part of the formation, the Bedded Tuff at 0.284+/-0.012 Ma. The new, precise radiometric age determination for the Pumice Tuff also provides an age for the widespread Lake Baringo Trachyte, since the Pumice Tuff is the early pyroclastic phase of this voluminous trachyte eruption.These results establish the age of fossil hominids KNM-BK 63-67 and KNM-BK 8518 at approximately 0.510-0.512 Ma, a significant finding given that few Middle Pleistocene hominids are radiometrically dated. The Kapthurin hominids are thus the near contemporaries of those from Bodo, Ethiopia and Tanzania. A flake and core industry from lacustrine sediments in the lower part of the formation is constrained by new dates of 0.55-0.52 Ma, a period during which the Acheulian industry, characterized by handaxes, is known throughout East Africa. Points, typical of the Middle Stone Age (MSA), are found in Kapthurin Formation sediments now shown to date to between 0.509+/-0.009 Ma and 0.284+/-0.012 Ma. This date exceeds previous estimates for the age of the MSA elsewhere in East Africa by 49 ka, and establishes the age of Acheulian to MSA transition for the region. Evidence of the use of the Levallois technique for the manufacture of both small flakes and biface preforms, the systematic production of blades, and the use and processing of red ochre also occurs in this interval. The presence of blades and red ochre at this depth is important as blades signify a high degree of technical competence and red ochre suggests symbolic behavior.     

Methylseleninic acid activates Keap1/Nrf2 pathway via up-regulating miR-200a in human oesophageal squamous cell carcinoma cells

Oesophageal squamous cell carcinoma (ESCC) occurs at a very high rates in certain regions of China. There are increasing evidences demonstrating that selenium could act as a potential anti-oesophageal cancer agent, but the precise mechanisms involved are still not completely understood. Methylseleninic acid (MSA), as a potent second-generation selenium compound, is a promising chemopreventive agent. Previous studies demonstrated that the kelch-like ECH-associated protein 1 (Keap1)/nuclear factor E2-related factor 2 (Nrf2) system plays a critical role in cancer prevention, but little is known about its association with MSA in ESCC cells. In the present study, we observed that MSA treatment significantly down-regulated Keap1, induced nuclear accumulation of Nrf2 and enhance the antioxidant response element (ARE) promoter activity in ESCC cells. MSA could also significantly induce miR-200a expression and inhibit Keap1 directly. Antagomir-200a could attenuate MSA treatment-induced Keap1 down-regulation in ESCC cells. Moreover, MSA-induced miR-200a expression was dependent on the mediation of Krüpple-like factor 4 (KLF4). These results reaffirm the potential role of MSA as a chemopreventive agent via the regulation of KLF4/miR-200a/Keap1/Nrf2 axis in ESCC cells.     

Nassarius kraussianus shell beads from Blombos Cave: evidence for symbolic behaviour in the Middle Stone Age

Since 1991, excavations at Blombos Cave have yielded a well-preserved sample of faunal and cultural material in Middle Stone Age (MSA) levels. The uppermost MSA phase, M1, is dated to c. 75 ka by optically stimulated luminescence (OSL) and thermoluminescence, and the middle M2 phase to a provisional c. 78 ka. Artefacts unusual in a MSA context from these phases include bifacial points, bone tools, engraved ochre and engraved bone. In this paper, we describe forty-one marine tick shell beads recovered from these MSA phases and tick shell beads from Later Stone Age (LSA) levels at Blombos Cave and the Die Kelders site. Thirty-nine shell beads come from the upper M1 phase and two from M2. Morphometric, taphonomic and microscopic analysis of modern assemblages of living and dead tick shell demonstrate that the presence of perforated Nassarius kraussianus shells in the Blombos MSA levels cannot be due to natural processes or accidental transport by humans. The types of perforation seen on the MSA shells are absent on modern accumulations of dead shells and not attributable to post-depositional damage. Their location, size, and microscopic features are similar to those obtained experimentally by piercing the shell wall, through the aperture, with a sharp bone point. Use-wear, recorded on the perforation edge, the outer lip, and the parietal wall of the aperture indicates the shells having being strung and worn. MSA shell beads differ significantly in size, perforation type, wear pattern and shade compared to LSA beads and this eliminates the possibility of mixing across respective levels. Thirty-one beads were found in four groups of five to twelve beads, each group being recovered in a single square or in two adjacent sub-squares during a single excavation day. Within a group, shells display a similar shade, use-wear pattern and perforation size suggesting their provenance from the same beadwork item, lost or disposed during a single event. The likely symbolic significance of these finds suggests levels of cognitively modern behaviour not previously associated with MSA people.     

The handaxe reconsidered

The Acheulean handaxe is one of the longest‐known and longest‐surviving artifacts of the Palaeolithic and, despite its experimentally tested functionality, is often regarded as puzzling. It is unnecessary to invoke a unique‐for‐mammals genetic mechanism to explain the handaxe phenomenon. Instead, we propose that two nongenetic processes are sufficient. The first is a set of ergonomic design principles linked to the production of sturdy, hand‐held cutting tools in the context of a knapped‐stone technology that lacked hafting. The second is an esthetic preference for regular forms with gradual curves and pleasing proportions. Neither process is a cultural meme but, operating together in a cultural context, they can account for all of the supposedly puzzling time‐space patterns presented by handaxes.     

Variation of Mutagenic Action on Nonsense Mutants at Different Sites in the Iso-1-Cytochrome c Gene of Yeast

Three ochre and two amber mutants in yeast have been definitively identified by the amino acid replacements in iso-1-cytochromes c from intragenic revertants. Except for rare and sometimes unusual changes, all of the replacements were single amino acids whose codons differed from UAA or UAG by one base. These assignments, which were based on the absence of tryptophan replacements in ochre revertants, could be corroborated from the studies of two groups of suppressors that were shown to act on either the ochre or amber mutants. All five nonsense mutants are located at different sites in the cyc1 gene and all are at sites that can be occupied by amino acids having a wide range of structures. The relative frequencies of the amino acid replacements indicate that identical codons located at different sites may respond differently to a mutagenic agent. Notably glutamine replacements occurred almost exclusively in UV-induced revertants of only one ochre mutant cyc1–9, but not at all or at reduced proportions in the others. Similarly, lysine replacements occurred almost exclusively in the NA-induced revertants of only the ochre mutant cyc1–72, but not at all in the others. These and other results reveal that mutation of A·T base pairs by UV and nitrous acid are dependent upon the location of the codon within the gene as well as the location of the base pair within the codon. From these findings, it appears as if the type of base-pair changes induced by UV and nitrous acid are strongly influenced by adjacent nucleotide sequences.     

Differences in loading of the temporomandibular joint during opening and closing of the jaw

Kinematics of the human masticatory system during opening and closing of the jaw have been reported widely. Evidence has been provided that the opening and closing movement of the jaw differ from one another. However, different approaches of movement registration yield divergent expectations with regard to a difference in loading of the temporomandibular joint between these movements. Because of these diverging expectations, it was hypothesized that joint loading is equal during opening and closing. This hypothesis was tested by predicting loading of the temporomandibular joint during an unloaded opening and closing movement of the jaw by means of a three-dimensional biomechanical model of the human masticatory system. Model predictions showed that the joint reaction forces were markedly higher during opening than during closing. The predicted opening trace of the centre of the mandibular condyle was located cranially of the closing trace, with a maximum difference between the traces of 0.45 mm. The hypothesis, postulating similarity of joint loading during unloaded opening and closing of the jaw, therefore, was rejected. Sensitivity analysis showed that the reported differences were not affected in a qualitative sense by muscular activation levels, the thickness of the cartilaginous layers within the temporomandibular joint or the gross morphology of the model. Our predictions indicate that the TMJ is loaded more heavily during unloaded jaw opening than during unloaded jaw closing.     

A comparison of MSA tools

Multiple sequence alignment (MSA) is essential in phylogenetic, evolutionary and functional analysis. Several MSA tools are available in the literature. Here, we use several MSA tools such as ClustalX, Align-m, T-Coffee, SAGA, ProbCons, MAFFT, MUSCLE and DIALIGN to illustrate comparative phylogenetic trees analysis for two datasets. Results show that there is no single MSA tool that consistently outperforms the rest in producing reliable phylogenetic trees.     

古人类对赭石的利用行为在其演化中的意义

长期以来赭石利用行为被视为人类行为现代性的标志之一,受到国内外考古学界的普遍关注。本文回溯和梳理了全球背景下赭石利用的起源、发展及其与人类演化史的关系。在现代人广泛分布于全球之后,赭石利用行为更加丰富和多样化地出现在各地,然而现有考古证据表明该行为并不是解剖学意义上的现代人突变性的发明。赭石利用不能被单纯地定义为现代人行为,而应是有着长久演化积累的现代性行为之一。在长期传播与演化过程中,赭石的功能从意识形态、艺术表达等逐渐扩展到作为矿物成分被用于实际生产生活。赭石的利用历史可追溯到中更新世中期,但其广泛分布仍与晚更新世以来现代人的广泛扩散直接相关,对于理解现代人的意识形态、社会组织方式以及艺术表达、精神文化发展都具有重要的意义。国内目前所发表的相关考古学证据相对较少,以下马碑遗址为代表的材料,也恰处于现代人在全球广泛扩散的窗口期,并伴有进步的细小石器镶嵌使用的证据,成为认识东亚现代人行为的关键性考古证据。     

A practical guide for the computational selection of residues to be experimentally characterized in protein families

In recent years, numerous biocomputational tools have been designed to extract functional and evolutionary information from multiple sequence alignments (MSAs) of proteins and genes. Most biologists working actively on the characterization of proteins from a single or family perspective use the MSA analysis to retrieve valuable information about amino acid conservation and the functional role of residues in query protein(s). In MSAs, adjustment of alignment parameters is a key point to improve the quality of MSA output. However, this issue is frequently underestimated and/or misunderstood by scientists and there is no in-depth knowledge available in this field. This brief review focuses on biocomputational approaches complementary to MSA to help distinguish functional residues in protein families. These additional analyses involve issues ranging from phylogenetic to statistical, which address the detection of amino acids pivotal for protein function at any level. In recent years, a large number of tools has been designed for this very purpose. Using some of these relevant, useful tools, we have designed a practical pipeline to perform in silico studies with a view to improving the characterization of family proteins and their functional residues. This review-guide aims to present biologists a set of specially designed tools to study proteins. These tools are user-friendly as they use web servers or easy-to-handle applications. Such criteria are essential for this review as most of the biologists (experimentalists) working in this field are unfamiliar with these biocomputational analysis approaches.     

Compressive fatigue and endurance of juvenile bovine articular cartilage explants

Articular cartilage is an enduring tissue. For most individuals, articular cartilage facilitates a lifetime of pain-free ambulation, supporting millions of loading cycles from activities of daily living. Although early studies into osteoarthritis focused on the role of mechanical fatigue in articular cartilage degeneration, much is still unknown regarding its strength and endurance characteristics. The compressive strength of juvenile, bovine articular cartilage explants was determined to be loading rate-dependent, reaching a maximum strength of 29.5 ± 4.8 MPa at a strain rate of 0.10 %/sec. The fatigue and endurance properties of articular cartilage were characterized utilizing a material testing system, as well as a custom, validated instrument termed the two degrees-of-freedom endurance meter (endurometer). These instruments characterized fatigue in articular cartilage explants at loading levels ranging from 10 to 80 % strength (%S), up to 100,000 cycles. Cartilage explants displayed characteristics of fatigue – fatigue life increased as the loading magnitude decreased. All explants failed within 14,000 cycles at loading levels between 50 and 80 %S. At 10 and 20 %S, all explants endured 100,000 loading cycles. There was no significant difference in equilibrium compressive modulus between run-out explants and unloaded controls, although the pooled modulus increased in response to testing. Histological staining and biochemical assays revealed no material changes in collagen, sulfated glycosaminoglycan, or hydration content between unloaded controls and explants cyclically loaded to run-out. These results suggest articular cartilage may have a putative endurance limit of 20 %S (5.86 MPa), with implications for articular cartilage biomechanics and mechanobiology.