Methotrexate conjugate with branched polypeptide influences Leishmania donovani infection in vitro and in experimental animals

Methotrexate (MTX) has been coupled to various structurally related, polycationic (poly[Lys(DL-Ala(m))] (AK), poly[Lys(Ser(i)-DL-Ala(m))] (SAK), poly[Lys(DL-Ala(m)-Leu(i))] (ALK)), or amphoteric (poly[Lys(Glu(i)-DL-Ala(m))] (EAK)) synthetic branched polypeptides containing poly[L-Lys] backbone by the aid of BOP reagent. The average degree of MTX incorporation was found to be dependent on the charge properties of the polymer. Under the experimental conditions used, the molar substitution ratio achieved was higher for polycations (25%) than for the amphoteric polypeptide (10%). We have studied the effect of polycationic polypeptides on Leishmania donovani infection. Results demonstrated that MTX conjugates in which the drug is covalently attached to carrier have pronounced leishmanicid activity. In this communication we showed that (a) a branched polypeptide-methotrexate conjugate with a polycationic carrier (ALK) increases the effect of MTX against Leishmania donovani infection in mice; (b) the covalent bond between the carrier and methotrexate is essential for both in vivo and in vitro activity; and (c) the number of Leishmania donovani parasites in infected macrophages are markedly reduced in conjugate treated animals. In vitro observation might also indicate that the MTX conjugate exhibits an effect through an uptake by macrophages which is different from that of the free drug.     

Carrier design: Synthesis and conformational studies of poly (L-lysine) based branched polypeptides with hydroxyl groups in the side chains

In the present study the development of a new series of branched polypeptides that contain hydroxyl groups in side chains is reported. Serine or threonine were attached by 1-hydroxy-benzotriazole catalyzed active ester method to the N-terminals of oligo (DL -alanine) chains grafted to a polylysine backbone resulted in poly[Lys-(Ser₁-DL -Ala_m)] (SAK) and poly-[Lys-(Thr_i-DL -Ala_m)] (TAK). Ser was coupled also directly to the η-amino groups of polylysine followed by polymerization of N-carboxy-DL -alanine anhydride resulting oligo (DL -Ala) chain terminals. In this way a reverse sequence was built up in the side chain corresponding to the poly[Lys-(DL -Ala_m-Ser_i)] (ASK). The number of hydroxyl groups in the polymer was increased by the synthesis of a branched polypeptide with oligo (DL -serine) branches instead of oligo (DL -alanine) ones—poly[Lys-(DL -Ser_m)] (SK). Classification of solution conformations of branched polypeptides was carried out by CD spectroscopy performed in water solution of various pH values and ionic strengths. Incorporation of single Ser residues in poly[Lys-(X_i)]-type polypeptides markedly promotes the formation of ordered structure without resulting precipitation even in high salt concentration. The presence of branches with multiple DL -Ser residues resulted in a slightly decreased ability of the polypeptide backbone to adopt an ordered conformation. Comparison of the CD properties of the SAK-ASK pair demonstrates that these compounds are similar, showing an increased tendency to form an ordered spatial arrangement in solution at elevated pH or ionic strength; however, differences in their CD spectra suggest that SAK has higher capability to form regular conformation under comparable conditions. The replacement of Ser by the Thr residue in poly[Lys-(X_i-DL -Ala_m)] induced a conformational transition and TAK exhibited a more helical structure. These results might indicate that not only hydrophobic or ionic attraction, but also H-bond interaction, can play a role in the formation and/or stabilization of ordered conformation of branched polypeptides. Findings with the hydroxyl group containing polymers reported in this paper can also explain their prolonged shelf stability and high water solubility. © 1997 John Wiley & Sons, Inc. Biopoly 42: 719–730, 1997     

Effect of phospholipid bilayers on solution conformation of branched polymeric polypeptides and peptide-polymer conjugates

This report provides a detailed analysis on the influence of phosholipid bilayers on the conformation of poly[Lys(X(i)-DL-Ala(m))] (XAK, where X = Ser, Orn, Glu, or AcGlu) type branched polypeptides and their peptide conjugates. CD spectra of polycationic (SAK, OAK), amphoteric (EAK), or polyanionic (Ac-EAK) polylysine derivatives were recorded in 0.25M acetate buffer at pH 7.4 as well as in the presence of DPPC or DPPC/PG (95/5, 80/20 mol/mol) liposomes. Based on these data, two groups of polypeptides are described. Group one contains polypeptides with significantly ordered conformation even in buffer solution (SAK, AcEAK), which is essentially not altered by phospholipids. Group two, branched polypeptides (OAK, EAK), with only partially ordered conformation in aqueous solution in the presence of phospholipid bilayers with high PG content, could adopt more (EAK) or less (OAK) ordered alpha-helical structure depending on their charge properties. In addition, we report on the synthesis of two new sets of oligopeptide-branched polypeptide conjugates. Studies with selected conjugates suggest that these compounds are highly ordered in buffer solution almost regardless from the helix-forming ability of the carrier (AK, SAK, EAK) and from the hydrophilic/hydrophobic character of peptides attached (AVKDEL vs FWRGDLVFDFQV). Addition of phospholipid bilayers with different composition essentially had no modifying effect on conformation of conjugates. From this we can conclude that the covalently coupled oligopeptides has a predominant effect of the conformational properties of conjugates.     

Conjugation of epitope peptides with SH group to branched chain polymeric polypeptides via Cys(Npys)

Since bioconjugates may play an important role as therapeutics in the future, the development of new and effective conjugation strategies is necessary. For the attachment of peptide-like molecules to carriers, there are two main coupling methods involving amide or disulfide bonds. Conjugation through an amide bond can be achieved in several well-defined ways known from peptide chemistry. However, the formation of disulfide bridges between cysteine-containing peptides and carrier molecules still has some problems. In this paper, we describe a novel approach in which the carrier polypeptide is modified by 3-nitro-2-pyridinesulfenyl (Npys)-protected cysteine and this derivative has been applied for conjugation of Cys-containing epitope peptides with poly(L-lysine)-based branched polypeptides. Considering the stability of Npys group in the presence of pentafluorophenol, Boc-Cys(Npys)-OPfp dervivative was selected for introduction to the N-terminal of branches of polypeptides backbone. The branches of the polymers were built up from oligo(DL-alanine) (poly[Lys(DL-Ala(m))], AK) and elongated by an optically active amino acid [poly[Lys(X(i)-DL-Ala(m))], XAK]. We found that the nature of X (Glu, Ser, Thr) has great influence on the incorporation of the protected cysteine residue. Herpes simplex virus and adenovirus epitope peptides were conjugated to Boc-Cys(Npys)-modified polypeptides. Results indicate that the incorporation of epitope peptides depends on the number of Npys group on the polymers as well as on the presence/absence of Boc-protecting group on the Cys residue. This new class of Cys(Npys)-derivatized branched polypeptides is stable for a couple of months and suitable for effective preparation of epitope peptide conjugates possessing increased water solubility.     

Interaction of branched chain polymeric polypeptides with phospholipid model membranes

The surface properties at the air/water interface and the interaction of branched chain polymeric polypeptides with a general formula poly[Lys-(DL -Ala_m-X₁)], where X = Π (AK), Ser (SAK), or Glu (EAK), with phospholipids were investigated. Polylysine derivatives with polycationic (SAK, AK) or amphoteric (EAK) were capable to spread and form stable monomolecular layers. The stability of monolayers at the air/water interface was dependent on the side-chain terminal amino acid residue of polymers and can be described by SAK < AK < EAK order. The area per amino acid residue values calculated from compression isotherms were in the same range as compared to those of linear poly-α-amino acids and proteins. Moreover, these polymers interact with phospholipid monomolecular layers composed of dipalmitoyl phosphatidyl choline (DPPC) or DPPC/PG (PG: phosphatidyl glycerol; 95/5, mol/mol). Data obtained from compression isotherms of phospholipids spread on aqueous polymer solutions at different initial surface pressure indicated that insertion into lipid monolayers for SAK or AK is more pronounced than for EAK. The interaction between branched polypeptides and phospholipid membranes was further investigated using lipid bilayers with DPPC/PG and fluorescent probes located either at the polar surface [1-(4-trimethylammonium-phenyl)-6-phenyl-1,3,5-hexatriene (TMA-DPH) sodium anilino naphthalene sulfonate (ANS)] or within the hydrophobic core (DPH) of the liposome. Changes in fluorescence intensity and in polarization were observed when TMA-DPH or ANS, but not DPH were used. Comparative data also indicate that all three polymers interact only with the outer surface of the bilayer, but even the most marked penetration of polycationic polypeptide (SAK) did not result in alteration of the ordered state of the alkyl chains in the bilayer. Taken together, data obtained from mono- or bilayer experiments suggest that the interaction between branched polymers and phospholipids are highly dependent on the charge properties (Ser vs Glu) and on the identity (Ser vs Ala) of side-chain terminating amino acids. The binding of polymers to the model membranes could be mainly driven by electrostatic forces, but the significant role of hydrophilic properties in case of SAK cannot be excluded. © 1998 John Wiley & Sons, Inc. Biopoly 46: 169–179, 1998     

The influence of the side-chain sequence on the structure-activity correlations of immunomodulatory branched polypeptides. Synthesis and conformational analysis of new model polypeptides

New branched polypeptides were synthesized for a detailed study of the influence of the side-chain structure on the conformation and biological properties. The first subset of polypeptides were prepared by coupling of tetrapeptides to poly[L-Lys]. These polymers contain either DL-Ala3-X [poly[Lys-(X-DL-Ala3)n]] or X-DL-Ala3 [poly[Lys-(DL-Ala3-X)n] (n less than or equal to 1)] tetrapeptide side chains. Another group of branched polymers comprise a mixture of DL-Alam and of DL-Alam-X oligomeric branches in a random distribution [poly[Lys-(DL-Alam-Xi)] (i less than 1, m approximately 3)]. In each subset the X = Leu or Phe derivatives were prepared. The N-protected tetrapeptides were synthesized by conventional liquid phase methods and were coupled as active esters. The degree of racemization was found relatively high both for active esters and coupled derivatives, when optically active amino acids were in the C-terminal position of the tetrapeptides. In the case of the poly[Lys-(Leu-DL-Ala3)n] derivative, comparative experiments were carried out using various methodical alterations. The highest stereochemical homogeniety could be achieved when the tetrapeptide active ester was synthesized by the "backing off" method. CD spectra of poly[Lys-(Xi-DL-Alam)] (i less than 1, m approximately 3) and of poly[Lys-(X-DL-Ala3)n] were analyzed and compared to those of poly[Lys-(DL-Alam-Xi)] and of poly[Lys-(DL-Ala3-X)n]. All measurements were performed in water solutions of varying pH values and ionic strengths. The data obtained suggest that branched polypeptides containing a mixture of two different types of oligomeric side chains (DL-Alam and DL-Alam-Xi or Xi-DL-Alam) distributed randomly adopt an almost identical conformation to those that comprise only the respective tetrapeptide (DL-Ala3-X or X-DL-Ala3) branches. The results also indicate that the tendency to form an ordered structure is determined by the identity and the position of the chiral amino acid X (Phe or Leu) in the side chain.     

Polypeptide conjugates comprising a beta-amyloid plaque-specific epitope as new vaccine structures against Alzheimer's disease

Immunotherapeutic approaches designed to induce a humoral immune response have recently been developed for possible vaccination to the treatment of Alzheimer's disease (AD). Based on the identification of Abeta(4-10) (FRHDSGY) as the predominant B-cell epitope recognized by therapeutically active antisera from transgenic AD mice, branched polypeptide conjugates with this epitope peptide were synthesized and characterized. In order to produce immunogenic constructs, the Abeta(4-10) epitope alone or together with a promiscuous T-helper cell epitope peptide (FFLLTRILTIPQSLD) were attached via thioether linkage to different branched chain polymeric polypeptides with Ser or Glu in the side chains. A single peptide containing both an Abeta(4-10) and T-helper cell epitope, joined by a dipeptide Cys-Acp spacer, was also attached through the thiol function to chloroacetylated poly[Lys(Seri-DL-Alax)] (SAK). Comparative binding studies of the conjugates with a monoclonal antibody against the beta-amyloid(1-17) peptide in mice were performed by direct ELISA. The conformational preferences of carriers and conjugates in water and in a 9:1 trifluoroethanol:water mixture (v/v) was analyzed by CD spectroscopy. Experimental data showed that the chemical nature of the carrier macromolecule, and the attachment site of the epitope to the carrier, have significant effects on antibody recognition, but have no marked influence on the solution conformation of the conjugates.     

The effect of the structure of branched polypeptide carrier on intracellular delivery of daunomycin

The conjugate of acid labile cis-aconityl-daunomycin (cAD) with branched chain polypeptide, poly[Lys(Glui-DL-Alam)] (EAK) was very effective against L1210 leukemia in mice. However, Dau attached to a polycationic polypeptide, poly[Lys(Seri-DL-Alam)] (SAK) exhibited no in vivo antitumor effect. In order to understand this difference we have performed comparative in vitro studies to dissect properties related to interaction with the whole body (e.g., biodistribution) from those present at cellular or even molecular level. We report here (a) the kinetics of acid-induced Dau liberation, (b) interaction with DPPC phospholipid bilayer, (c) in vitro cytotoxic effect on different tumor cells, and (d) intracellular distribution in HL-60 cells of polycationic (cAD-SAK) and amphoteic (cAD-EAK) conjugates. Fluorescence properties of the two conjugates are also reported. Our findings demonstrate that the kinetics of the drug release, intracellular distribution and in vitro cytotoxic effect are rather similar, while the effect on DPPC phospholipid bilayer and fluorescence properties of the two conjugates are not the same. We also found that the in vitro cytotoxicity is cell line dependent. These observations suggest that the structure of the polypeptide carrier could have marked influence on drug uptake related events.     

Synthesis, conformation, biodistribution, and in vitro cytotoxicity of daunomycin-branched polypeptide conjugates.

Daunomycin has been attached to various structurally related synthetic branched polypeptides with a polylysine backbone, using its acid-labile cis-aconityl derivative (cAD). Due to the importance of the side-chain structure in alpha-helix formation and immunological and pharmacological properties of branched polypeptides, we have investigated the conformation, biodistribution, and in vitro cytotoxicity of cAD-carrier conjugates with polypeptides containing amino acid residues of different identity and/or configuration at the side-chain end (XAK type) or at the position next to the polylysine backbone (AXK type), where X = Leu, D-Leu, Pro, Glu, or D-Glu. According to CD studies, polycationic conjugates with hydrophobic Leu in the side chains could assume a highly ordered conformation, while amphoteric conjugates containing Glu proved to be unordered in PBS. The reduction of in vitro cytotoxic activity of cAD by conjugation to carriers and the biodistribution profile of the conjugates were found to be dependent predominantly on the charge properties and on the side-chain sequence of the carrier polypeptide. It was demonstrated that by proper combination of structural elements of the carrier molecule, it is feasible to construct a cAD-branched polypeptide conjugate with significantly prolonged blood survival and with no reduction in in vitro cytotoxicity of the drug.     

The effect of the structure of branched polypeptide carrier on intracellular delivery of daunomycin

The conjugate of acid labile cis-aconityl-daunomycin (cAD) with branched chain polypeptide, poly[Lys(Glu_i-DL-Ala_m)] (EAK) was very effective against L1210 leukemia in mice. However, Dau attached to a polycationic polypeptide, poly[Lys(Ser_i-DL-Ala_m)] (SAK) exhibited no in vivo antitumor effect. In order to understand this difference we have performed comparative in vitro studies to dissect properties related to interaction with the whole body (e.g., biodistribution) from those present at cellular or even molecular level. We report here (a) the kinetics of acid-induced Dau liberation, (b) interaction with DPPC phospholipid bilayer, (c) in vitro cytotoxic effect on different tumor cells, and (d) intracellular distribution in HL-60 cells of polycationic (cAD-SAK) and amphoteic (cAD-EAK) conjugates. Fluorescence properties of the two conjugates are also reported. Our findings demonstrate that the kinetics of the drug release, intracellular distribution and in vitro cytotoxic effect are rather similar, while the effect on DPPC phospholipid bilayer and fluorescence properties of the two conjugates are not the same. We also found that the in vitro cytotoxicity is cell line dependent. These observations suggest that the structure of the polypeptide carrier could have marked influence on drug uptake related events.     

Phospholipid-model membrane interactions with branched polypeptide conjugates of a hepatitis A virus peptide epitope

To establish correlation between structural properties (charge, composition, and conformation) and membrane penetration capability, the interaction of epitope peptide-carrier constructs with phospholipid model membranes was studied. For this we have conjugated a linear epitope peptide, (110)FWRGDLVFDFQV(121) (110-121), from VP3 capside protein of the Hepatitis A virus with polylysine-based branched polypeptides with different chemical characteristics. The epitope peptide elongated by one Cys residue at the N-terminal [C(110-121)] was attached to poly[Lys-(DL-Ala(m)()-X(i)())] (i < 1, m approximately 3), where x = ?(AK), Ser (SAK), or Glu (EAK) by the amide-thiol heterobifunctional reagent, 3-(2-pyridyldithio)propionic acid N-hydroxy-succinimide ester. The interaction of these polymer-[C(110-121)] conjugates with phospholipid monolayers and bilayers was studied using DPPC and DPPC/PG (95/5 mol/mol) mixture. Changes in the fluidity of liposomes induced by these conjugates were detected by using two fluorescent probes 1,6-diphenyl-1,3, 5-hexatriene (DPH) and sodium anilino naphthalene sulfonate (ANS). The binding of conjugates to the model membranes was compared and the contribution of the polymer component to these interactions were evaluated. We found that conjugates with polyanionic/EAK-[C(110-121)] or polycationic/SAK-[C(110-121)], AK-[C(110-121)]/character were capable to form monomolecular layers at the air/water interface with structure dependent stability in the following order: EAK-[C(110-121)] > SAK-[C(110-121)] > AK-[C(110-121)]. Data obtained from penetration studies into phospholipid monolayers indicated that conjugate insertion is more pronounced for EAK-[C(110-121)] than for AK-[C(110-121)] or SAK-[C(110-121)]. Changes in the fluorescence intensity and in polarization of fluorescent probes either at the polar surface (ANS) or within the hydrophobic core (DPH) of the DPPC/PG liposomes suggested that all three conjugates interact with the outer surface of the bilayer. Marked penetration was documented by a significant increase of the transition temperature only with the polyanionic compound/EAK-[C(110-121)]. Taken together, we found that the binding/penetration of conjugates to phospholipid model membranes is dependent on the charge properties of the constructs. Considering that the orientation and number of VP3 epitope peptides attached to branched polypeptides were almost identical, we can conclude that the structural characteristics (amino acid composition, charge, and surface activity) of the carrier have a pronounced effect on the conjugate-phospholipid membrane interaction. These observations suggest that the selection of polymer carrier for epitope attachment might significantly influence the membrane activity of the conjugate and provide guidelines for adequate presentation of immunogenic peptides to the cells.     

Carrier design: Conformational studies of amino acid (X) and oligopeptide (X-DL-Alam) substituted poly(L-lysine)

The present study was undertaken to examine the influence of the reversal of the sidechain sequential order on the conformation of branched polypeptides. At the same time, the influence of the optically active amino acid joined directly to the poly (L -Lys) backbone and the DL -Ala oligomer grafted as chain-terminating fragment were separately analyzed. Therefore two sets of polypeptides were synthesized corresponding to the general formula poly [Lys-(X_i,)] (XK) and poly[Lys-(DL -Ala_m-X_i)] (AXK) when X = Ala, D -Ala, Leu, D -Leu, Phe, D -Phe, Ile, Pro, Glu.,D -Glu, or His. For coupling amino acid X to polylysine, three types of active ester methods were compared: the use of pentafluorophenyl or pentachlorophenyl ester, and the effect of the addition of an equimolar amount of 1-hydroxybenzotriazole. After cleavage of protecting groups, AXK polypeptides were synthesized by grafting short oligo (DL -Ala) chains to XK by using N-carboxy-DL -Ala anhydride. The CD measurements performed in water solutions of various pH values and ionic strengths were used for classification of the polypeptide conformations as either ordered (helical) or unordered. Different from what was observed with the unsubstituted poly (L -Lys), poly[Lys-(X_i)] type polypeptides can adopt ordered structure even under nearly physiological conditions (pH 7.3, 0.2M NaCl). These data suggest that the introduction of amino acid residue with either (ar) alkyl side chain (Ala, Leu, Phe) or negatively charged side chain (Glu) promotes markedly the formation of ordered structure. Comparison of chiroptical properties of poly [Lys- (DL -Ala_m-X_i)] and of poly [Lys- (X_i)] reveals that side-chain interactions play an important role in the stabilization of ordered solution conformation of AXK type branched polypeptides. The results give rather conclusive evidence that not only hydrophobic interactions, but also ionic attraction, can be involved in the formation and stabilization of helical conformation of branched polypeptides. © 1993 John Wiley & Sons, Inc.     

Synthesis and comparison of antibody recognition of conjugates containing herpes simplex virus type 1 glycoprotein D epitope VII

Synthetic oligopeptides comprising linear or continuous topographic B-cell epitope sequences of proteins might be considered as specific and small size antigens. It has been demonstrated that the strength and specificity of antibody binding could be altered by conjugation to macromolecules or by modification in the flanking regions. However, no systematic studies have been reported to describe the effect of different carrier macromolecules in epitope conjugates. To this end, the influence of carrier structure and topology on antibody recognition of attached epitope has been studied by comparing the antibody binding properties of a new set of conjugates with tetratuftsin analogue (H-[Thr-Lys-Pro-Lys-Gly](4)-NH(2), T20) sequential oligopeptide carrier (SOC(n)), branched chain polypeptide, poly[Lys(Ser(i)-DL-Ala(m))] (SAK), multiple antigenic peptide (MAP), and keyhole limpet hemocyanine (KLH). In these novel constructs, peptide (9)LKNleADPNRFRGKDL(22) ([Nle(11)]-9-22) representing an immunodominant B cell epitope of herpes simplex virus type 1 glycoprotein D (HSV-1 gD) was conjugated to polypeptides through a thioether or amide bond. Here we report on the preparation of sequential and polymeric polypeptides possessing chloroacetyl groups in multiple copies at the alpha- and/or epsilon-amino group of the polypeptides and its use for the conjugation of epitope peptides possessing Cys at C-terminal position. We have performed binding studies (direct and competitive ELISA) with monoclonal antibody (Mab) A16, recognizing the HSV gD-related epitope, [Nle(11)]-9-22, and conjugates containing identical and uniformly oriented epitope peptide in multiple copies attached to five different macromolecules as carrier. Data suggest that the chemical nature of the carrier and the degree of substitution have marked influence on the strength of antibody binding.     

Biodegradability of synthetic branched polypeptide with poly(L-lysine) backbone

A detailed investigation is reported about the biodegradation of poly[Lys(DL-Alam)], m approximately 3, (AK) the common inside area of a branched polypeptide model system developed by our group over the last decade. Enzymatic hydrolysis was carried out by the exopeptidase aminopeptidase M, or the endopeptidase trypsin, or their mixture. Ion-exchange column chromatography, paper electrophoresis and thin-layer chromatography were utilised to achieve separation of metabolites. Breakdown products were identified by the aid of synthetic oligopeptides representing the potential fragments (DL-Ala2, DL-Ala3, Lys(DL-Alam), m = 1-3). The kinetics and the degree of enzymatic degradation were determined. The ratio of peptide/amino acid amounts in the hydrolysate was found to be 1.07 after 24 h treatment with aminopeptidase M, 3.0 with trypsin and 1.3 with aminopeptidase - trypsin mixture. The overall results indicated that the proteolysis of AK by an aminopeptidase M and trypsin mixture proceeds stepwise at multiple sites on the polypeptide chain. The degradation is significantly retarded as compared to that of alpha- or epsilon-polylysine. A mechanism of degradation is suggested based on the experimental results.     

A new heat-stable regulatory factor is associated with aortic polycation-modulated (PCM)-phosphatase

An aortic phosphatase which dephosphorylates several proteins including phosphorylase a and the 20-kDa myosin light chains is subject to modulation in vitro by polycationic effectors such as lysine-rich histone-H1 and polylysine. This study was based on the hypothesis that polycationic modulation of expressed enzymic activity involves interactions between the effectors and a regulatory site associated with the polycation-modulated (PCM)-phosphatase. Basal PCM-phosphatase activity expressed against myocardial myosin light chains (MLC, 1258 nmole/min/mg) was about eightfold greater than activity expressed against phosphorylase a (149 nmole/min/mg). However, dephosphorylation of phosphorylase a was stimulated four- to sevenfold by low concentrations of polylysine (Mr = 13,000; 0.01-0.1 microM), whereas MLC phosphatase activity was virtually abolished. Higher concentrations of polylysine inhibited dephosphorylation of either substrate. Interestingly, a heat-stable fraction prepared from the PCM-phosphatase reversed the stimulatory effect of polylysine on phosphorylase phosphatase activity and the inhibitory effect on dephosphorylation of MLC. No reversal of the modulatory effects of polylysine occurred when protein phosphatase inhibitor 1 or inhibitor 2 was substituted for the heat-stable factor derived from the PCM-phosphatase. Sucrose density centrifugation of the enzyme yielded a single peak (Mr = 63,000) exhibiting polycation-modulated activity against phosphorylase a and MLC. Moreover, heating each of the gradient fractions showed the presence of a heat-stable factor which reversed the modulatory effects of polylysine on dephosphorylation of either phosphorylase a or MLC. These results show that a specific heat-stable factor, which differs from both inhibitor 1 and 2, is associated with the PCM-phosphatase. The results suggest that polycationic modulation of expressed PCM-phosphatase activity may involve interactions between the polycationic effector and the enzyme-associated regulatory factor.     

Highly branched poly(L-lysine)

This paper describes the synthesis of several novel water-soluble highly branched polypeptides. The synthesis starts with the ring-opening polymerization of epsilon-benzyloxycarbonyl-l-lysine N-carboxyanhydride (Z-Lys NCA) or epsilon-trifluoroacetyl-l-lysine N-carboxyanhydride (TFA-Lys NCA), followed by end functionalization of the peptide chain with N(alpha),N(epsilon)-di(9-fluorenylmethoxycarbonyl)-l-lysine (N(alpha),N(epsilon)-diFmoc Lys). Deprotection of the N(alpha),N(epsilon)-diFmoc Lys end group affords two new primary amine groups that can initiate the polymerization of a second generation of branches. Repetition of this ring-opening polymerization-end functionalization sequence affords highly branched poly(epsilon-benzyloxycarbonyl-l-lysine) (poly(Z-Lys)) and poly(epsilon-trifluoroacetyl-l-lysine) (poly(TFA-Lys)) in a small number of straightforward synthetic steps. Removal of the side-chain protective groups yields water-soluble and highly branched poly(l-lysine)s, which may be of potential interest for a variety of medical applications.     

Mechanism of fibrin-specific fibrinolysis by staphylokinase: participation of alpha 2-plasmin inhibitor

When the extent of plasminogen activation by staphylokinase (SAK) or streptokinase (SK) was measured in human plasma, SAK barely induced plasminogen activation, whereas SK activated plasminogen significantly. When the plasma was clotted with thrombin, the plasminogen activation by SAK was markedly enhanced, but that of SK was little enhanced. Similarly, in a purified system composed of plasminogen, fibrinogen and alpha 2-plasmin inhibitor (alpha 2-PI, alpha 2-antiplasmin), such a fibrin clot increased the activity of SAK significantly. However, when alpha 2-PI was removed from the reaction system, enhancement of the SAK reaction was not observed. In addition, SAK as distinct from SK, showed very little interference with the action of alpha 2-PI. Plasminogen activation by SAK is thus essentially inhibited by alpha 2-PI, but this reaction is not inhibited in fibrin clots. These results suggest that SAK forms a complex with plasminogen, which binds to fibrin and induces fibrinolysis.     

Uptake of branched polypeptides with poly[L-lys] backbone by bone-marrow culture-derived murine macrophages: the role of the class a scavenger receptor

Selective delivery of antiparasitic or antibacterial drugs into infected macrophages could be a promising approach for improved therapies. Methotrexate conjugate with branched chain polypeptides exhibited pronounced anti-Leishmania activity in vitro and in vivo as reported here earlier. To identify structural requirements for efficient uptake of branched polypeptides, we have studied murine bone marrow culture-derived macrophages (BMMphi) from 129/ICR mice. We report on the translocation characteristics of structurally closely related compounds labeled with 5(6)-carboxyfluorescein. We found that this process is dependent on experimental conditions (e.g. polypeptide concentration, incubation time, and temperature). Using specific inhibitors as well as macrophages from wild-type and class-A scavenger receptor knockout (SR-A -/-) mice, we demonstrated that SR-A was involved in the endocytosis of some polypeptides depending on their charge. Uptake could be blocked by unlabeled polypeptide, by SR-A inhibitors, and by specific anti-SR-A monoclonal antibody. The polyanionic polypeptide poly[Lys(Succ-Glu(1.0)-dl-Ala(3.8))] (SuccEAK) with high charge density translocated more efficiently than poly[Lys(Ac-Glu(1.0)-dl-Ala(3.8))] (AcEAK), which had a lower anionic charge density. On the basis of experimental data presented, SuccEAK can be considered as a potential candidate for the design of a macromolecular carrier for specific drug delivery of bioactive entities into macrophages via SR-A.     

Viscosity and potentiometric measurements of poly(L-histidyl-L-alanyl-α-L-glutamic acid) and poly(L-lysyl-L-alanyl-α-L-glutamic acid)

Poly(His-Ala-Glu) and poly(Lys-Ala-Glu) were examined by viscosity and potentiometric titration. These measurements were interpreted in terms of the hydrodynamic size of the above sequential polypeptides. Effects of polymer, size and concentration, and solution-salt concentration were demonstrated. Although the sequential polypeptides generally behave like polyampholytes, they do demonstrate some differences. These differences my be attributed to the ability of ionized side chains three residues apart to repel themselves, in the order His < Glu < Lys.