The mechanism of the skeletal muscle myosin ATPase. I. Identity of the myosin active sites.

In the present study, the question of whether the two myosin active sites are identical with respect to ATP binding and hydrolysis was reinvestigated. The stoichiometry of ATP binding to myosin, heavy meromyosin, and subfragment-1 was determined by measuring the fluorescence enhancement caused by the binding of MgATP. The amount of irreversible ATP binding and the magnitude of the initial ATP hydrolysis (initial Pi burst) was determined by measuring [gamma-32P]ATP hydrolysis with and without a cold ATP chase in a three-syringe quenched flow apparatus. The results show that, under a wide variety of experimental conditions: 1) the stoichiometry of ATP binding ranges from 0.8 to 1 mol of ATP/myosin active site for myosin, heavy meromyosin, and subfragment-1, 2) 80 to 100% of this ATP binding is irreversible, 3) 70 to 90% of the irreversibly bound ATP is hydrolyzed in the initial Pi burst, 4) the first order rate constant for the rate-limiting step in ATP hydrolysis by heavy meromyosin is equal to the steady state heavy meromyosin ATPase rate only if the latter is calculated on the basis of two active sites per heavy meromyosin molecule. It is concluded that the two active sites of myosin are identical with respect to ATP binding and hydrolysis.     

Reversible dissociation of dog cardiac myosin regulatory light chain 2 and its influence on ATP hydrolysis

The regulatory light chains of dog heart myosin were removed by digestion with myopathic hamster neutral protease. The heavy chains were also cleaved to an extent of 15%, but a homogeneous, rod-free LC2-deficient myosin was obtained by ion-exchange chromatography. A similar approach was used to prepare LC2-deficient heavy meromyosin. Neither Ca2+- nor K+-EDTA-activated ATPases were affected by LC2 removal. The Lineweaver-Burk plots for actin-activated ATPase in 25 mM KCl were biphasic giving a Vmax of 1.54 s-1 for control and LC2-recombined myosins and 1.08 s-1 for LC2-deficient myosin at low actin concentrations. At high actin concentrations, the Vmax for control and recombined myosins was 2.33 s-1 and 1.39 s-1 for LC2-deficient myosin. Increasing the KCl concentration in the reaction mixtures resulted in more linear plots without suppressing the 35-45% decrease in Vmax that accompanied LC2 removal. The results from assays with control and LC2-deficient heavy meromyosin performed in the absence of KCl, paralleled those obtained with myosin. The latter was also assayed in the presence of equimolar concentrations of C-protein in 50 mM KCl: C-protein induced a significant increase in the actin-activated ATPase of both control and LC2-recombined myosins, with no effect on LC2-deficient myosin. The Vmax for actin-activation in the presence of C-protein was 2.38 s-1, 0.83 s-1, and 1.71 s-1 for control, LC2-deficient, and recombined myosins, respectively. The enhancement of actin-activation in both the control and LC2-recombined myosins represents a possible role for C-protein in a LC2-mediated potentiation of actomyosin ATPase.     

Kinetics of steady state ATPase activity and rigor complex formation of acto-heavy meromyosin

1. Actin and heavy meromyosin, initially mixed in a Mg-ATP solution, began to form the rigor complex slowly after ATP in the solution had been completely hydrolyzed.

2. This was because the heavy meromyosin-product complex formed via ATP hydrolysis was almost completely dissociated from actin even in the absence of ATP and as soon as this heavy meromyosin-product complex was decomposed, the heavy meromyosin combined with actin forming the rigor complex.

3. Linear plots were obtained when the reciprocal of the excess rate of the actin-accelerated rigor complex formation was plotted against the reciprocal of the added actin concentration as similar with those made on the steady acto-heavy meromyosin ATPase.

4. The V of the rigor complex formation process was about 1/5 of that of the steady acto-heavy meromyosin ATPase activity, showing that the actomyosin ATPase activity could not be explained merely by the actin-accelerated decomposition of the heavy meromyosin-product complex.

5. The same analyses were carried out on myosin subfragment 1.

6. Our results could be explained by considering the two non-identical active sites of myosin, and we propose the following scheme for the actomyosin ATPase.

7. Actin accelerates the rate-limiting bond hydrolysis in the ATPase occurring at one active site of myosin, as well as the rate-limiting decomposition of the heavy meromyosin-product complex formed at another site.     

Purification and characterization of a smooth muscle myosin phosphatase from turkey gizzards

A phosphoprotein phosphatase that dephosphorylates smooth muscle myosin has been purified to apparent homogeneity from turkey gizzards. Smooth muscle phosphatase (SMP) IV has a molecular weight of 150,000 as determined by gel filtration on a Sephadex G-200 column and is composed of two subunits (Mr = 58,000 and 40,000). Although it is active toward a number of proteins, its activities toward the contractile proteins, intact myosin, heavy meromyosin, and isolated myosin light chains are higher than its activities toward phosphorylase alpha, histone IIA, and phosphorylase kinase. SMP-IV preferentially dephosphorylates the beta-subunit of phosphorylase kinase. The properties of the enzyme have been studied using heavy meromyosin, a soluble chymotryptic fragment of myosin, and isolated myosin light chains as substrates. SMP-IV has high affinity for both substrates and is optimally active at neutral pH. Divalent cations, Ca2+ and Mg2+, activate the dephosphorylation of heavy meromyosin but inhibit the activity toward myosin light chains. Low concentrations of ATP (1-5 mM) activate SMP-IV but concentrations higher than 5 mM are inhibitory. Inhibition of 50% of the activity of the enzyme by NaF and PPi requires concentrations higher than 10 mM. Rabbit skeletal muscle heat stable inhibitor-2 has no effect on the activity of SMP-IV toward heavy meromyosin, myosin light chains, and phosphorylase alpha.     

The covalent modification of myosin's proteolytic fragments by a purine disulfide analog of adenosine triphosphate. Reaction at a binding site other than the active site.

A purine disulfide analog of ATP, 6,6'-dithiobis(inosinyl imidodiphosphate), forms mixed disulfide bonds between the 6 thiol group on the purine ring and certain key cysteines on myosin, heavy meromyosin, and subfragment one. The EDTA ATPase activities of myosin and heavy meromyosin were completely inactivated when 4 mol of thiopurine nucleotide was bound. When similarly inactivated, subfragment one, depending on its method of preparation, incorporated either 1 or 2 mol of thiopurine nucleotide. Modification of a single cysteine on subfragment one resulted in an inhibition of both the Ca2+ and the EDTA ATPase activities, but the latter always to a greater extent. Modification of two cysteines per head of heavy meromyosin had the same effect suggesting that the active sites were not blocked by the thiopurine nucleotides. Direct evidence for this suggestion was provided by equilibrium dialysis experiments. Heavy meromyosin and subfragment one bound 1.9 and 0.8 mol of [8-3H]adenylyl imidodiphosphate per mol of enzyme, respectively, with an average dissociation constant of 5 X 10(-7) M. Heavy meromyosin with four thiopurine nucleotides bound or subfragment one with two thiopurine nucleotides bound retained 65-80% of these tight adenylyl imidodiphosphate binding sites confirming the above suggestion. Thus previous work assuming reaction of thiopurine nucleotide analogs at the active site of myosin must be reevaluated. Ultracentrifugation studies showed that heavy meromyosin which had incorporated four thiopurine nucleotides did not bind to F-actin while subfragment one with one thiopurine nucleotide bound interacted only very weakly with F-actin. Thus reaction of 6,6'-dithiobis(inosinyl imidodiphosphate) at nucleotide binding sites other than the active sites reduces the rate of ATP hydrolysis and inhibits actin binding. It is suggested that these second sites may function as regulatory sites on myosin.     

Actin-activated Mg-ATPase activity of Dictyostelium myosin II. Effects of filament formation and heavy chain phosphorylation.

The actin-activated Mg-ATPase activities of unphosphorylated and heavy chain phosphorylated Dictyostelium myosin II and of a Dictyostelium myosin II heavy meromyosin (HMM) fragment were examined at different Mg2+ and KCl concentrations. The Mg-ATPase activity of HMM displayed a maximum rate, Vmax, of about 4.0/s and a Kapp (actin concentration required to achieve 1/2 Vmax) that increased from 8 to 300 microM as the KCl concentration increased from 0 to 120 mM. When assayed with greater than 5 mM Mg2+ and 0 mM KCl the unphosphorylated Dictyostelium myosin II yielded a Kapp of 0.25 microM and a Vmax of 2.8/s. At lower Mg2+ concentrations or with 50 mM KCl the data were not fit well by a single hyperbolic curve and Kapp increased to 25-100 microM. The increase in Kapp did not correlate with the loss of sedimentable filaments. At KCl concentrations above 100 mM Vmax increased to greater than 4/s. Heavy chain phosphorylated myosin (3.5 mol of phosphate/mol myosin) displayed a Vmax of about 5/s and a Kapp of 50 microM under all conditions tested. Thus, heavy chain phosphorylation inhibited the actin-activated Mg-ATPase activity of Dictyostelium myosin II in 5-10 mM Mg2+ and low ionic strength through an increase in Kapp.     

Correlation of conformation and phosphorylation and dephosphorylation of smooth muscle myosin

The rate of phosphorylation and dephosphorylation of smooth muscle myosin by myosin light chain kinase and by two myosin light chain phosphatases (gizzard phosphatase IV and aorta phosphatase) are measured in various conditions; the relationship between the rate of phosphorylation and dephosphorylation of myosin and the myosin conformation is also studied. The rate of dephosphorylation of myosin was completely inhibited in the presence of 1 mM MgCl2 and ATP at low ionic strength where phosphorylated myosin forms a folded conformation. The inhibition was released when myosin formed either an extended monomer or filaments. The rate of phosphorylation of myosin was also affected by the conformation of myosin. The rate for a folded myosin was slower than those for an extended monomer and filamentous myosin. The phosphorylation and dephosphorylation of heavy meromyosin, subfragment-1, and the isolated 20,000-dalton light chain are not inhibited at low ionic strength, and the rate of phosphorylation and dephosphorylation was decreased with increasing ionic strength. KCl dependence of the rate of phosphorylation and dephosphorylation of myosin was normalized by using KCl dependence of subfragment-1, and it was found that the marked inhibition of the rate of phosphorylation and dephosphorylation of myosin is closely related to the change from an extended to a folded conformation of myosin.     

Enzymatic mechanochemistry. I. The interaction of heavy meromyosin with “immobilized adenosine triphosphate”

ATP was covalently bound to an agarose gel. The insolubilized ATP was found to be capable of specifically binding heavy meromyosin. The adsorbed heavy meromyosin could be eluted by ATP in solution. Both binding and elution by ATP of heavy meromyosin were not much effected by Ca²⁺, Mg²⁺ or EDTA.While the water-soluble polyalanine-myosin was also found to be adsorbed, myosin in 0.5 M KCl did not seem to be adsorbed by agarose-ATP.Both Mg²⁺ and Ca²⁺ appear to activate the splitting of bound ATP by heavy meromyosin to practically the same extent.We prepared water-soluble derivatives of ATP in which ATP underwent the same chemical modification required for its coupling to agarose but in which the agarose component was absent. Their splitting by heavy meromyosin was also activated by Mg²⁺ though to a lesser extent but actin did not influence this reaction.Possible relations between our findings and the various stages of the reaction between myosin and ATP, as well as the potential use of columns filled with insolubilized NTPs for the separation and purification of myosin and of its subfragments, are discussed.     

Temperature-dependent transitions of the myosin-product intermediate at 10 degrees during Mn(II)-ATP hydrolysis by myosin from rabbit psoas muscle.

The initial burst of Pi liberation during the hydrolysis of Mn(II)-ATP by heavy meromyosin from rabbit psoas muscle was investigated. Below 10 degrees, the initial burst of Pi liberation was inhibited by the pre-addition of ADP without any change in the steady-state activity, but it was not inhibited above 10 degrees. The burst size was about one mole per mole of heavy meromyosin. The initial burst of Pi liberation in Mg-ATP hydrolysis at 8 degrees, however, was not inhibited by the pre-addition of ADP. These results, obtained with psoas muscle heavy meromyosin, were almost the same as those obtained with heavy meromyosin from rabbit leg and back muscles (Hozumi and Tawada (1975) Biochim. Biophys. Acta 376, 1-12) and, therefore, indicate that in Mn-ATP above 10 degrees there is at the burst site a predominant myosin -product complex generated by ATP hydrolysis. Similarly, below 10 degrees there is a myosin-product complex identical with the one generated by adding ADP (and Pi) to myosin.     

Further studies on the interaction of actin with heavy meromyosin and subfragment 1 in the presence of ATP.

It has been postulated that, during the hydrolysis of ATP, both normal and SH1-blocked heavy meromyosin undergo a rate-limiting transition from a refractory state which cannot bind to actin to a nonrefractory state which can bind to actin. This model leads to several predictions which were studied in the present work. First, the fraction of heavy meromysin or subfragment 1 which remains unbound to actin when the ATPase equals Vmax should have the same properties as the original protein. In the present study it was determined that the unbound protein has normal ATPase activity which suggests that it is unbound to actin for a kinetic reason rather than because it is a permanently altered form of the myosin. Second, if the heavy meromyosin heads act independently half as much subfragment 1 as heavy meromyosin should bind to actin. Experiments in the ultracentrifuge demonstrate that about half as much subfragment 1 as heavy meromyosin sediments with the actin at Vmax. Third, the ATP turnover rate per actin monomer at infinite heavy meromyosin concentration should be much higher than the ATP turnover rate per heavy meromyosin head at infinite actin concentration. This was found to be the case for SH1-blocked heavy meromyosin since, even at very high concentrations of SH1-blocked heavy meromyosin, in the presence of a fixed actin concentration, the actin-activated ATPase rate remained proportional to the SH1-blocked heavy meromyosin concentration. All of these results tend to confirm the refractory state model for both SH1-blocked heavy meromyosin and unmodified heavy meromyosin and subfragment 1. However, the nature of the small amount of heavy meromyosin which does bind to actin in the presence of ATP at high actin concentration remains unclear.     

Solution structure of heavy meromyosin by small-angle scattering

Elucidation of x-ray crystal structures for the S1 subfragment of myosin afforded atomic resolution of the nucleotide and actin binding sites of the enzyme. The structures have led to more detailed hypotheses regarding the mechanisms by which force generation is coupled to ATP hydrolysis. However, the three-dimensional structure of double-headed myosin consisting of two S1 subfragments has not yet been solved. Therefore, to investigate the overall shape and relative orientations of the two heads of myosin, we performed small-angle x-ray and neutron scattering measurements of heavy meromyosin containing all three light chains (LC(1-3)) in solution. The resulting small-angle scattering intensity profiles were best fit by models of the heavy meromyosin head-tail junction in which the angular separation between heads was less than 180 degrees. The S1 heads of the best fit models are not related by an axis of symmetry, and one of the two S1 heads is bent back along the rod. These results provide new information on the structure of the head-tail junction of myosin and indicate that combining scattering measurements with high resolution structural modeling is a feasible approach for investigating myosin head-head interactions in solution.     

Effects of actin and calcium ion on chymotryptic digestion of skeletal myosin and their implications to the function of light chains

Experiments have been carried out to assess the involvement of the myosin light chains [obtained by treatment of myosin with 5,5'-dithiobis(2-nitrobenzoic acid) (Nbs2)] in the control of cross-bridge movement and actomyosin interactions. Chymotryptic digestions of myosin, actomyosin, and myofibrils do not detect any Ca2+-induced change in the subfragment 2 region of myosin. Actin, like Ca2+, protects the in situ Nbs2 light chains from proteolysis and causes a partial switch in the digestion product of myosin from subfragment 1 to heavy meromyosin. This effect is independent of the state of aggregation of myosin, and it persists in acto heavy meromyosin and in actinomyosin in 0.6 M NaCl. Digestions and sedimentation studies indicate that there is no direct acto light chain interaction. Proteolysis of myosin shows a gradual transition from production of heavy meromyosin to subfragment 1 with lowering of the salt level. In the presence of Ca2+ heavy meromyosin is generated both in digestions of polymeric and of monomeric myosin. These results are explained in terms of localized changes within the Nbs2 light chains and subfragment 1. Subunit interactions in the myosin head lead to a Ca2+-induced reduction in the affinity of heavy meromyosin for actin in the presence of MgATP. The resulting Ca2+ inhibition of the actin-activated ATPase of myosin can be detected at high salt concentrations(75 mM KCl).     

Interaction between Acanthamoeba actin and rabbit skeletal muscle tropomyosin.

The binding of 125I-labeled muscle tropomyosin to Acanthamoeba and muscle actin was studied by ultracentrifugation and by the effect of tropomyosin on the actin-activated muscle heavy meromyosin ATPase activity. Binding of muscle tropomyosin to Acanthamoeba actin was much weaker than its binding to muscle actin. For example, at 5 mM MgCl2, 2 mM ATP, and 5 micronM actin, tropomyosin bound strongly to muscle actin but not detectably to Acanthamoeba actin. When the concentration of actin was raised from 5 micronM to 24 micronM in the presence of 80 mM KCl, the binding of tropomyosin to Acanthamoeba actin approached its binding to muscle actin. As with muscle actin, the addition of muscle heavy meromyosin in the absence of ATP induced binding of tropomyosin in Acanthamoeba actin under conditions were binding would otherwise not have occurred. The most striking difference between the interactions of muscle tropomyosin with the two actins, however, was that under conditions where tropomyosin was found to both actins, its stimulated the Acanthamoeba actin-activated heavy meromyosin ATPase but inhibited the muscle actin-activated heavy meromyosin ATPase.     

Modulation of monomer-polymer equilibrium of phosphorylated smooth muscle myosin: effects on actin activation

Actin activation of the adenosinetriphosphatase (ATPase) of phosphorylated gizzard myosin at low (2 mM) free Mg2+ concentration and 50 mM total ionic strength continues to increase on raising the free Ca2+ concentration near pCa 3. Similar levels of activity can be obtained by increasing the free Mg2+ concentration to a higher (in excess of 4 mM free) concentration. In the presence of micromolar concentrations of free Ca2+ and low free Mg2+ concentration, the actin-activated adenosine 5'-triphosphate (ATP) hydrolysis exhibits an initial rapid rate which progressively slows to a final, lower but more linear rate. In the presence of high divalent cation concentrations, the fast rate of ATP hydrolysis is maintained during the entire ATPase assay. The ionic conditions which favor the slow rate of ATP hydrolysis are correlated with increased proportions of folded myosin monomers while higher rates of ATP hydrolysis are correlated with increased levels of aggregated myosin. Elevating the thin filament proteins to saturating concentrations does not abolish the change in ATPase rate or the final distribution of myosin aggregates and monomers; however, the stability of the myosin aggregates is enhanced by the presence of thin filament proteins in low divalent cation conditions. The nonlinear profile of the actin-activated ATP hydrolysis in low divalent cation concentrations is eliminated by utilizing nonfilamentous, phosphorylated heavy meromyosin. The data presented indicate that Ca2+ and Mg2+ alter monomer-polymer equilibrium of stably phosphorylated myosin. The alteration of monomer-polymer equilibrium by Ca2+ at low Mg2+ concentration modulates ATPase rates.     

Temperature-dependent change in rate-limiting step of the magnesium-stimulated ITPase of myosin.

The effects of temperature on Mg-ITPase activity of heavy meromyosin and myosin subfragment 1 were measured in 0.1 M KC1. The initial burst of Pi liberation was one mol per mol of heavy meromyosin or two mol of myosin subfragment 1, i.e. one mol per two mol of myosin active sites, at 20 degrees C. However, it was almost zero mol below 8degrees C. Effects of KC1 concentration and pH on ITPase activity of heavy meromyosin at 20 degrees C were different from those below 8 degrees C, suggesting that the rate-limiting step in the Mg-ITP hydrolysis of myosin depends on temperature. The effect of temperature on the actin activation of heavy meromyosin Mg-ITPase was analyzed by measuring the temperature dependence of double-reciprocal plots of ITPase activity against actin concentration. The extent of actin activation was larger at low temperture. The results presented in this paper might be explained by assuming the existence of two kinds of active sites on a myosin molecule.     

Extraction and functional reformation of thick filaments in chemically skinned molluscan catch muscle fibers.

A method for the almost complete extraction of myosin from smooth muscle fibers of the anterior byssal retractor muscle (ABRM) of Mytilus edulis was developed, and functional reformation of thick filaments in the fibers was achieved. Complete removal of myosin from the glycerol-extracted ABRM fibers with a solution containing 600 mM KCl, 5 mM MgCl2, and 5 mM ATP was difficult. However, successive treatments of the ABRM fibers with glycerol and saponin made the plasma membrane permeable to Mg-ATP and myosin. The extraction of myosin completely eliminated the tension induced by the addition of Mg-ATP. Partial recovery of tension development was observed by irrigation of myosin into fibers from which myosin had been extracted. Similar results were obtained using rabbit myosin instead of ABRM myosin. Addition of heavy meromyosin, on the other hand, had a suppressive effect on the tension development, as is the case in glycerinated rabbit psoas muscle fibers.     

pH-dependence characteristics of Ca-ATPase activity of heavy meromyosin with modified SH-groups]

Study of pH-dependence of Ca-ATPase activity of heavy meromyosin (HMM) at low and high ionic strength showed essential differences in the modifying effect of two sulfhydryl reagents, p-CMB and silver. Silver ions in conditions studied independently on pH and KCl concentration produce an inhibition of ATP hydrolysis by myosin and HMM, the shape of the pH-dependence curve remaining similar to that of the native enzyme up to 40% of blocking free sulfhydryl groups. At the same degree of binding of sulfhydryl groups with p-CMB at 0,5 M KCl the pH-dependence curve due to activation at neutral pH changes it's shape and becomes similar to that for dissociation of two ionizable groups (at neutral and alkaline regions). In contrast to this, a low or zero concentrations of KCl no activation was observed for the enzyme with 40-50% of SH-Groups modified by p-CMB and Ca-ATPase in this case seemed to be independent of pH. The data obtained suggest that SH-Groups are not included into the active site of myosin, and the activating effect observed for some sulfhydryl reagents, is due to conformational changes and it can be the result of the penetrance of the organic part of the reagent molecule into hydrophobic region of the protein.     

Experimental evidence for the contractile activities of Acanthamoeba myosins IA and IB

The low-shear viscosity of 5-30 microM F-actin was greatly increased by the addition of 0.1-0.5 microM unphosphorylated Acanthamoeba myosins IA and IB. The increase in viscosity was about the same in 2 mM ADP as in the absence of free nucleotide but was much less in 2 mM ATP. The single-headed monomolecular Acanthamoeba myosins were as effective as an equal molar concentration of two-headed muscle heavy meromyosin and much more effective than single-headed muscle myosin subfragment-1. These results suggest that Acanthamoeba myosins IA and IB can cross-link actin filaments as proposed in the accompanying paper (Albanesi, J. P., Fujisaki, H., and Korn, E. D. (1985) J. Biol. Chem. 260, 11174-11179) to explain the actin-dependent cooperative increase in actin-activated Mg2+-ATPase activity as a function of the concentration of myosin I. Superprecipitation occurred when phosphorylated myosin IA or IB was mixed with F-actin. In addition to myosin I heavy chain phosphorylation, superprecipitation required Mg2+ and ATP. ATP hydrolysis was linear during the time course of the superprecipitation, and inhibitors of ATP hydrolysis inhibited superprecipitation. A small, dense contracted gel was formed when the reaction was carried out in a cuvette, and a birefringent actomyosin thread resulted from superprecipitation in a microcapillary. The rate and extent of superprecipitation depended on the actin and myosin I concentrations with maximum superprecipitation occurring at an actin:myosin ratio of 7:1. These results provide strong evidence for the ability of Acanthamoeba myosins IA and IB to perform contractile and motile functions.     

Bovine cardiac myosin subfragment 1. Transient kinetics of ATP hydrolysis

The kinetics of binding and hydrolysis of ATP by bovine cardiac myosin subfragment 1 has been reinvestigated. More than 90% of the total fluorescence amplitude associated with ATP hydrolysis occurs with an apparent second-order rate constant of 8.1 X 10(5) M-1 S-1 and a limiting rate constant of approximately 140 S-1 (100 mM KCl, 50 mM 1,3-bis-[tris(hydroxymethyl)methylamino]-propane, 10 mM MgCl2, pH 7.0, 20 degrees C); the remaining 10% occurs more slowly (approximately 1 S-1). The observed rate constants are independent of subfragment 1 concentration under pseudo first-order conditions for ATP with respect to protein. The fraction of protein which hydrolyzes ATP rapidly is not a function of the nucleotide or protein concentration and appears to be constant irrespective of ionic strength or temperature within the range studied (50-100 mM KCl, pH 7.0, 15-20 degrees C). These data are compared to that obtained previously using subfragment 1 prepared by a different method which showed ATP-dependent aggregation of two protein species.     

Purealin, a novel stabilizer of smooth muscle myosin filaments that modulates ATPase activity of dephosphorylated myosin

Effects of purealin isolated from a sea sponge, Psammaplysilla purea, on the enzymatic and physiochemical properties of chicken gizzard myosin were studied. At 0.15 M KCl, 40 microM purealin increased the Ca2+- and Mg2+-ATPase activity of dephosphorylated gizzard myosin to 2.5- and 3-fold, respectively, but decreased the K+-EDTA-ATPase activity of the myosin to 0.25-fold. In contrast, purealin had little effect on the ATPase activities of phosphorylated gizzard myosin. The ATP-induced decrease in light scattering of dephosphorylated gizzard myosin at 0.15 M KCl was lessened by 40 microM purealin. Electron microscopic observations indicated that thick filaments of dephosphorylated myosin were disassembled immediately by addition of 1 mM ATP at 0.15 M KCl, although they were preserved by purealin for a long time even after addition of ATP. Upon ultracentrifugation, dephosphorylated myosin sedimented as two components, the 10 S species and myosin filaments, in the solution containing 0.18 M KCl and 1 mM Mg X ATP in the presence of 60 microM purealin. These results suggest that purealin modulates the ATPase activities of dephosphorylated gizzard myosin by enhancing the stability of myosin filaments against the disassembling action of ATP.