Combining poly (methacrylic acid-co-ethylene glycol dimethacrylate) monolith microextraction and on-line pre-concentration-capillary electrophoresis for analysis of ephedrine and pseudoephedrine in human plasma and urine

A method based on poly (methacrylic acid-co-ethylene glycol dimethacrylate) (MAA-EGDMA) monolith microextraction (PMME) and field-enhanced sample injection (FESI) pre-concentration technique was proposed for sensitive capillary electrophoresis-ultraviolet (CE-UV) analysis of ephedrine (E) and pseudoephedrine (PE) in human plasma and urine. The PMME device consisted of a regular plastic syringe (1 mL), a poly (MAA-EGDMA) monolithic capillary (2 cm x 530 microm I.D.) and a plastic pinhead connecting the former two components seamlessly. The extraction was achieved by driving the sample solution through the monolithic capillary tube using a syringe pump, for the desorption step, an aliquot of organic solvent, which normally provided an excellent medium to ensure direct compatibility for FESI in CE, was injected via the monolithic capillary and collected into a vial for subsequent analysis by CZE. The best separation was achieved using a buffer composed of 0.1M phosphate electrolyte (pH 2.5) and 10% acetonitrile (v/v). The combination of both pre-concentration procedures allowed the detection limits of the analytes down to 5.3 ng/mL and 8.0 ng/mL in human plasma and urine, respectively. Excellent method of reproducibility was found over a linear range 50-5000 ng/mL in plasma and urine sample. Plasma and urine samples from volunteers receiving pseudoephedrine have also been successfully analysed.     

Fast analysis of pravastatin in production media

High throughput methods (high performance liquid chromatography and capillary electrophoresis) were developed to determine pravastatin in production media. The analyses were performed on particle column, monolithic column and silica capillary filled with borate buffer pH 9.3 containing 20 mM SDS. All three methods successfully separate pravastatin from interfering compounds (matrix, mevastatin and 6-epi pravastatin) and runtimes are shorter than 1 min. Solvent consumptions for methods using small particle column, monolith column and MECK were 132, 510 and 1.5 mL h(-1). The most sensitive was the method using particle column (LOD was about 10(-5) mg mL(-1)), followed by the system using monolith column (LOD was 2 x 10(-4) mg mL(-1)) and the MECK method (LOD was about 0.02 mg mL(-1)).     

纤维素酶在二甲基亚砜微扰条件下的动力学行为和光谱学变化

为了探索二甲基亚砜对纤维素酶催化活性的影响,以羧甲基纤维素钠(CMC)为底物来研究纤维素酶纯酶在二甲基亚砜中的动力学变化、紫外吸收光谱、紫外差示光谱和荧光发射光谱。实验表明:在3%的二甲基亚砜中,纤维素酶的催化活性下降了46.78%;其Km值从缓冲液中的2.500 mg/mL上升到二甲基亚砜中的3.922 mg/mL;在二甲基亚砜中,酶分子的肽键紫外吸收稍有改变,但其氨基酸基团的紫外吸收没有改变;其紫外差示光谱出现明显的正峰和负峰;其荧光发射光谱没有改变。研究结果证明:二甲基亚砜通过轻微改变酶分子的肽链结构,使分子构象改变,导致酶分子对底物的亲和力下降,从而降低其催化活性。     

Field-amplified sample stacking in capillary electrophoresis for the determination of clozapine, clozapine N-oxide, and desmethylclozapine in schizophrenics' plasma

A method of field-amplified sample stacking in capillary electrophoresis is described for the simultaneous determination of clozapine (CZP) and its metabolites, clozapine N-oxide (CNO), and desmethylclozapine (DMC), in human plasma. Plasma (0.2 mL) was extracted with organic solvents (ethyl acetate/n-hexane/isopropyl alcohol, 8/1/1 by volume) and centrifuged. An aliquot of supernatant was evaporated and suitably reconstituted with water for CE analysis. An untreated fused-silica capillary was used (31.2 cm; effective length, 20 cm; 50 microm i.d.) for the analysis. The background buffer was phosphate buffer (400 mM, pH 3.0) containing 50% ethylene glycol. The separation voltage was 25 kV with a detection wavelength of 214 nm. In the method validation, the calibration curves were linear (r > or = 0.98) over a range of 50-800 ng/mL for CZP, 30-180 ng/mL for CNO, and 25-600 ng/mL for DMC. The relative standard deviation (R.S.D.) and relative error (R.E.) were all less than 11% for the intra- and inter-day assays. The limits of detection (S/N = 3, electric-driven injection, 99.9s) of CZP, DMC, and CNO were 5, 5, and 10 ng/mL, respectively. After continuing treatment with the CZP tablets, a blood sample from one male schizophrenic patient (41-year-old, 62 kg) who had been receiving ongoing treatment with the CZP tablets was prepared and analyzed. The levels of CZP, DMC, and CNO were determined and the feasibility of the method's application in clinical treatment was proven.     

Elimination of oxalate contamination in RNA isolation from<Emphasis Type="Italic">Rumex obtusifolius</Emphasis>

Many plant RNA isolation techniques aim to prevent contamination by means of secondary phenolics, carbohydrates, RNase, and other chemicals. However, when applied in our laboratory to the isolation of RNA fromRumex obtusifolius, these protocols failed to produce good quality RNA. A major problem was contamination of the RNA samples with the secondary metabolite oxalate. The relative quantities of guanidine isothiocyanate extraction buffer to plant tissue used in the protocol had significant effects on oxalate contamination. An increase in extraction buffer, from 1.5 mL in the original method to 15 mL per 200–300 mg of tissue in our protocol, removed the oxalate from the RNA. This RNA was of a good quality and was suitable for molecular biology applications.     

Free radicals may contribute to oxidative skeletal muscle fatigue

We used mouse soleus in vitro (n = 30) and canine gastrocnemius-plantaris preparations (n = 20) pump-perfused at the animal's blood pressure to establish if free radicals contribute to fatigue in oxidative skeletal muscle. The soleus from each leg contracted for 200 ms (70 Hz) once every minute for 60 min in Hepes buffer gassed with 100% oxygen at 27 degrees C. When contracting in Hepes alone, both muscles fatigued at 0.9 mN/mm2.min over the 60 min. The addition of purines to the bath increased the rate to 1.4 mN/mm2.min and the addition of xanthine oxidase to generate free radicals increased the rate again to 1.9 mN/mm2.min. Thus free radicals appeared to attenuate oxidative skeletal muscle function. Each canine muscle contracted isometrically at 4 Hz for 30 min and then rested for 45 min before contracting for a second 30 min at 4 Hz. In each experiment, we infused saline at 0.76 mL/min into resting muscle and at 1.91 mL/min during the first contraction period. During the remainder of the experiment, we infused, at the same rates, saline (n = 4), 10 microM dimethyl sulfoxide (DMSO) (n = 4) to identify the effect of scavenging hydroxyl radicals, 1 mM allopurinol to establish the effect of blocking xanthine oxidase (n = 4), or 200 microM desferoxamine to determine the effect of chelating iron (n = 4). With saline, the fatigue rate over the 30 min of contractions increased from 5.0 +/- 0.2 to 6.3 +/- 0.5 N/kg.min from the first to the second stimulation period. The fatigue rate was slower in the second period with each of the three experimental substances (DMSO, 5.9 +/- 0.8 to 3.2 +/- 0.3; allopurinol, 7.3 +/- 1.1 to 4.6 +/- 0.6; desferoxamine, 6.8 +/- 0.8 to 4.4 +/- 0.8 N/kg.min). The fatigue rate was the same as control when DMSO was infused only during the second contraction period. Therefore, free radicals appeared to contribute to fatigue in oxidative skeletal muscle.     

叶绿素的快速提取与精密测定

Arnon法是叶绿素提取和测定最经典、最常用的方法, 此法虽经多次改进, 但仍存在着检测波长误差大、计算公式有误、提取速度慢、测定结果不够准确以及操作步骤繁琐等缺陷。该文提出了二甲基亚砜(DMSO)高温提取、80%丙酮稀释的两步快速浸提法, 使叶绿素提取和测定过程缩短至3小时以内。通过对提取温度、提取时间、稀释比例及吸收光谱等进行系统分析, 筛选出了叶绿素的最佳提取条件和叶绿素含量的准确计算公式, 并用多种类型的植物材料验证了改进后的提取方法, 证明该方法具优越性和可靠性。具体测定方法是将植物材料切成1 mm宽的细丝或细段, 取50-100 mg材料于10 mL具塞试管中; 加入2 mL DMSO, 使植物材料浸没其中, 65°C高温避光提取至植物材料变白或透明; 冷却后加入8 mL 80%丙酮, 混匀, 测定663.6和646.6 nm处的吸光度。用公式计算叶绿素浓度: C_a (mg∙L^-1)=12.27A_663.6-2.52A_646.6; C_b (mg∙L^-1)=20.10A_646.6-4.92A_663.6; C_T (mg∙L^-1)=C_a+C_b=7.35A_663.6+17.58A_646.6。     

Dimethyl Sulfoxide Is Feasible for Plant Tubulin Assembly In vitro: A Comprehensive Analysis

It is much more difficult for tubulin from plant sources to polymerize in vitro than tubulin from animal sources. Taxol, a most widely used reagent in microtubule studies, enhances plant microtubule assembly, but hinders microtubule dynamics. Dimethyl sulfoxide (DMSO), a widely used reagent in animal microtubule studies, is a good candidate for the investigation of plant microtubule assembly in vitro.However, proper investigation is lacking about the effects of DMSO on plant microtubule assembly in vitro.In the present study, DMSO was used to establish optimal conditions for the polymerization of plant tubulin. Tubulin, purified from lily pollen, polymerizes into microtubules at a critical concentration of 1.2mg/mL in the presence of 10% DMSO. The polymers appear to have a normal microtubule structure, as revealed by electron microscopy. In the presence of 10% DMSO, microtubule polymerization decreases when the pH of the medium is increased from 6.5 to 7.4. Both the polymerization rate and the mass of the polymers increase as temperature increases from 25 to 40 ℃. Tubulin polymerizes and depolymerizes along with cycling of temperature, from 37 to 4 ℃, or following the addition to or the removal of Ca2 from the medium. When incubated with nuclei isolated from tobacco BY-2 suspension cells, tubulin assembles onto the nuclear surface in the presence of 10% DMSO. Labeling lily pollen tubulin with 5- (and 6-)carboxytetramethyl-rhodamine succinimidyl ester (NHS-rhodamine) was performed successfully in the presence of 10% DMSO. Labeled tubulin assembles into a radial structure on the surface of BY-2 nuclei. The polymerization of lily pollen tubulin is also enhanced by microtubule-associated proteins from animal sources in the presence of 10% DMSO. All the experimental results indicate that plant tubulin functions normally in the presence of DMSO. Therefore, DMSO is an appropriate reagent for plant tubulin polymerization and investigation of plant microtubules in vitro.     

High sensitivity analysis of oxprenolol in urine by capillary electrophoresis with C18 packed on-line preconcentrator

High sensitivity analysis of oxprenolol in spiked human urine has been performed by capillary zone electrophoresis (CZE) in ammonium formate buffer pH 2.5 using an uncoated capillary with 1cm length C18 on-capillary preconcentrator at the inlet side. The preconcentrator was fabricated in laboratory using the packing method and not encapped C18 5 microm particles as stationary phase material. The packed path was retained into the capillary by sintered stationary phase frits. Before running the CZE analysis, the oxprenolol was eluted from the preconcentrator by injecting a short plug of acetonitrile/water mixtures. With respect to classical CZE, the use of on-line preconcentrator widely increased the method sensitivity allowing the detection of the drug at 0.5 ng/mL (injected concentration). The method showed a linear response in the range of 1-150 ng/mL oxprenolol standard compound. The intra-day repeatability (n = 11) R.S.D. values for migration time, peak area and normalized peak area were 0.72%, 3.96% and 3.66%, respectively, while inter-day repeatability (n = 5 days) R.S.D. values were 2.74%, 9.41% and 9.83%, respectively. The method was successfully applied to the analysis of oxprenolol in extracted urine spiked at 250 pg/mL (oxprenolol LOQ concentration in urine).     

Determination of josamycin in rat plasma by capillary electrophoresis coupled with post-column electrochemiluminescence detection

A novel determination method for josamycin (JOS) based on capillary electrophoresis-electrochemiluminescence detection has been described. In this study, platinum disk electrode (300 microm in diameter) was used as a working electrode and the conditions affecting separation and detection were investigated in detail. Under optimal condition: 40 cm separation capillary (75 microm i.d.); 1.25 V applied potential on the Pt disc of the ECL detector cell; 5 mM Ru(bpy)3(2+) and 50mM phosphate buffer (pH 7.5) in the detection cell; 12 kV separation voltage; 8s injection time; 10 kV injection voltage and 15 mM running buffer (pH 7.5), calibration curve was linear over the range from 10 ng/mL to 5.0 microg/mL with a detection limit of 3.1 ng/mL at a signal-to-noise ratio of 3. The method can be successfully applied for the determination of josamycin in rat plasma in 6 min and the extraction recoveries with spiked plasma samples were over 92%.     

Stability of free and immobilised peroxidase in aqueous–organic solvents mixtures

The activity and stability of horseradish (Amoracia rusticana) peroxidase (HRP) free in solution and immobilised onto silica microparticles was studied in the presence of organic co-solvents.

The effect of several hydrophilic organic solvents, namely dimethyl sulfoxide, dimethylformamide, dioxan, acetonitrile and tetrahydrofuran, in the activity and stability of free HRP was studied. From the solvents tested, DMSO led to the highest activities and stabilities. After 2 h of incubation at 35°C, the remaining activity of the enzyme in the presence of 30% of each solvent was less than 30%, with exception of DMSO for which the enzyme remained fully active.

In order to increase stability, HRP was covalently immobilised onto silica microparticles. The half-life of the enzyme in buffer at 50°C increased from 2 to 52 h when the enzyme was immobilised. The stability of both free and immobilised HRP was also studied at 50°C in aqueous mixtures of 3.5, 20, 35 and 50% (v/v) DMSO. Free HRP stability was not affected by the presence of 3.5 and 20% DMSO, but higher contents lead to a more pronounced deactivation. Immobilised HRP stability increased with DMSO content up to 20%, decreasing for higher contents. The enzyme half-life increased more than 300% when changing from buffer to 20% DMSO.

The deactivation of free HRP was modelled using the simple exponential decay, and the deactivation of immobilised HRP was described by a two-step inactivation model.     

Determination of azatadine in human plasma by liquid chromatography/tandem mass spectrometry

A sensitive method using liquid chromatography with tandem mass spectrometric detection (LC-MS/MS) was developed and validated for the analysis of antihistamine drug azatadine in human plasma. Loratadine was used as internal standard (IS). Analytes were extracted from human plasma by liquid/liquid extraction using ethyl acetate. The organic phase was reduced to dryness under a stream of nitrogen at 30 °C and the residue was reconstituted with the mobile phase. 5 μL of the resulting solution was injected onto the LC-MS/MS system. A 4.6 mm × 150 mm, I.D. 5 μm, Agilent TC-C(18) column was used to perform the chromatographic analysis. The mobile phase consisted of ammonium formate buffer 0.010 M (adjusted to pH 4.3 with 1M formic acid)/acetonitrile (20:80, v/v) The chromatographic run time was 5 min per injection and flow rate was 0.6 mL/min. The retention time was 2.4 and 4.4 min for azatadine and IS, respectively. The tandem mass spectrometric detection mode was achieved with electrospray ionization (ESI) iron source and the multiple reaction monitoring (MRM) (291.3 → 248.2m/z for azatadine, 383.3 → 337.3m/z for IS) was operated in positive ion modes. The low limit of quantitation (LLOQ) was 0.05 ng/mL. The intra-day and inter-day precision of the quality control (QC) samples was 8.93-11.57% relative standard deviation (RSD). The inter-day accuracy of the QC samples was 96.83-105.07% of the nominal values.     

The viability of cryopreserved PBPC depends on the DMSO concentration and the concentration of nucleated cells in the graft

BACKGROUND: DMSO is widely used as a cryoprotectant for PBPC. It is desirable to reduce the amount of DMSO without jeopardizing the quality of the stem cell product. The present study was undertaken to investigate whether recovery and survival of CD34+ cells would be significantly altered when PBPC used for autologous transplantations were cryopreserved with four different DMSO concentrations. METHODS: Apheresis samples of PBPC from 20 consecutive patients were mixed in parallel with 2%, 4%, 5% and 10% DMSO, frozen with identical cell concentrations at a controlled rate, and stored in liquid nitrogen for 6-8 weeks. PBPC samples from 11 consecutive patients were also cryopreserved with two different cell concentrations (150 and 300 x 10(6) nucleated cells/mL) to investigate the effect of increasing the cell concentrations while decreasing the DMSO concentration. The flow cytometric absolute count method, based on ISHAGE guidelines, was used to measure the absolute count of total and viable CD34+ cells in the post-thaw samples. RESULTS: PBPC cryopreserved at 150 x 10(6) cells/mL with 2% DMSO yielded significantly inferior CD34+ cell recovery (P < 0.001) and survival (P < 0.001) compared with cryopreservation with 4% and 5% DMSO. This was also observed when comparing higher cell concentrations. However, a reduced cell survival (P = 0.02) was observed when the nucleated cell concentration was increased from 150 to 300 x 10(6) cells/mL in samples cryopreserved with 5% DMSO. DISCUSSION: We conclude that 5% DMSO may be the optimal dose for cryopreserving PBPC as long as the cells have not been concentrated at much more than 200 x 10(6) nucleated cells/mL.     

HPLC-UV method development for fentanyl determination in rat plasma and its application to elucidate pharmacokinetic behavior after i.p. administration to rats

A simple, rapid and validated high performance liquid chromatography method with UV detection for the quantification of an opioid agonist, fentanyl (FEN), in rat plasma was developed. The assay procedure involved chromatographic separation using a ZIC-HILIC SeQUANT column (250 mm × 4.6 mm, i.d., 5 μm) and a mobile phase of acetonitrile and acetate buffer (pH 3.4, 20mM) of ratio (=65:35, v/v) at a flow rate of 1.2 mL/min and detection wavelength of 201 nm. Plasma sample (100 μL) pretreatment was based on simple deprotienization by acetonitrile spiked with clonidine as an internal standard (I.S.) of 20 ng/mL followed by extraction with tert-butyl methyl ether and centrifugation. The organic layer was evaporated under N(2) gas and reconstituted with 100 μL of acetate buffer (pH 3.4, 20mM), and 50-μL portions of reconstituted sample were injected onto the column. Sample analysis including sample pretreatment was achieved within 35 min. Calibration curve was linear (r ≥ 0.998) from 5 to 100 ng/mL. Both intra- and inter-day assay precisions that are presented through RSD were lower than 12.6% for intra-day and lower than 12.0% for inter-day assessment. Limit of detection was 0.8 ng/mL at S/N of 3. This method was omitting the use of expensive solid phase extraction and time consuming liquid extraction procedures. Moreover, the present method was successfully applied to study pharmacokinetic parameters of FEN after intraperitoneal administration to male Wistar rat. Pharmacokinetic parameters estimated by using moment analysis were T(1/2) 198.3 ± 44.7 min, T(max) 28.3 ± 2.9 min and AUC(0-180) 15.6 ± 2.9(× 10(2))ngmin/mL.     

Quantification of isosorbide 5-mononitrate in human plasma by liquid chromatography-tandem mass spectrometry using atmospheric pressure photoionization

Isosorbide 5-mononitrate (5-ISMN) is an organic nitrate widely used for its vasodilating properties in the treatment of angina pectoris. In the present study, an efficient, sensitive, robust method was developed for the determination and quantification of isosorbide 5-mononitrate, in human plasma, by liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS), using photospray ionization. Isosorbide 5-mononitrate was extracted from 0.5 mL human plasma by liquid-liquid extraction (LLE). The method had a chromatographic run of 2.0 min using a C(8) analytical column (100 mm x 2.1 mm i.d.) and the linear calibration curve over the range was linear from 20 to 2000 ng mL(-1) (r(2)>0.995). The between-run precision, based on the relative standard deviation replicate quality controls, was 7.9% (60 ng mL(-1)), 5.2% (300 ng mL(-1)) and 7.0% (1800 ng mL(-1)). The between-run accuracy was 94.9%, 94.1% and 88.8% for the above-mentioned concentrations, respectively. The method herein described was employed in a bioequivalence study of two tablet formulations of isosorbide 5-mononitrate 40 mg.     

Determination of erythromycin in rat plasma with capillary electrophoresis-electrochemiluminescence detection of tris(2,2'-bipyridyl) ruthenium(II)

A fast and sensitive approach for determination of erythromycin in rat plasma was described. The method used capillary electrophoresis coupled with end-column electrochemiluminescence (ECL) detection of Ru(bpy)(3)(2+). The separation column used had an inner diameter of 75 microm. The running buffer was 15 mmol/L sodium phosphate (pH=7.5). The solution in the detection cell was 50 mmol/L sodium phosphate (pH=8.0) and 5 mmol/L Ru(bpy)(3)(2+). ECL intensity varied linearly with erythromycin concentration from 1.0 ng/mL to 10 microg/mL. The detection limit (S/N=3) was 0.35 ng/mL. The relative standard deviations, of ECL intensity and migration time for eight consecutive injections of 1.0 microg/mL erythromycin (n=8), were 1.3% and 1.8%, respectively. The method was successfully applied to erythromycin determination in rat plasma. The recovery ranged from 92.5 to 97.5%.     

Regeneration of ethyl parathion antibodies for repeated use in immunosensor: a study on dissociation of antigens from antibodies

Reliable analysis using an immunosensor strongly depends on the specificity, activity, and sensitivity of the antibody. Immobilization of antibody on the solid matrix enables its repeated use, for which it is required to dissociate the antigens and antigen-enzyme conjugate from the immobilized antibody matrix after each use and while doing so, a maximum retention of activity and specificity are crucial requirements. In the present investigation, on the development of an immunosensor for the organophosphorus pesticide ethyl parathion (EP) using EP antibodies, different dissociating agents such as organic solvents, detergents and acidic buffers, that is, dimethyl sulphoxide (DMSO), Tween-20, cetyl trimethylammonium bromide (CTAB), methanol, chloroform, guanidium chloride (GdmCl), glycine-HCl (Gly-HCl) buffer in the pH range of 1.5-3.0, pierce buffer and combination of DMSO and methanol in phosphate buffer and Gly-HCl buffer and salts like NaCl and MgCl2 were used. Generally about 50-60% dissociation was obtained with some degree of denaturation of the antibody immobilized on the sepharose matrix. However, 1% DMSO in combination with 0.2 M Gly-HCl buffer at a pH of 2.3 showed 97% dissociation and the immobilized antibody retained sufficient activity to carry out 14 reproducible assays for EP.     

难溶于二甲亚砜多糖的甲基化方法研究

本文对难溶于二甲亚砜(DMSO)但易溶于水的多糖——羊栖菜褐藻糖胶的甲基化方法进行了研究。10mg多糖用0．1mL水溶解后,加和3mL DMSO,使多糖转溶于DMSO,然后加人2mL 3A分子筛脱除水分。将DNSO溶液过滤后,滤液中加入50mg NaOH粉末,室温下反应10min。加入0．5mL碘甲烷,室温下反应60min。加1mL水终止反应,加1mol／L HAc中和、透析、冻干。该法简便易行,所得产物的甲基化程度比较高。     

Highly sensitive profiling assay of acidic plant hormones using a novel mass probe by capillary electrophoresis-time of flight-mass spectrometry

Plant hormones play crucial roles in plant growth and development. However, up to date, identification and quantification of acidic plant hormones with trace amount in complicated plant matrix is still a challenge. In current study, we developed a high sensitive assay for the determination of acidic plant hormones in rice by combining capillary electrophoresis and electrospray ionization-time of flight-mass spectrometry (CE-ESI-TOF-MS). To improve the detection sensitivity of acidic plant hormones, 3-bromoactonyltrimethylammonium bromide (BTA) was synthesized as a new mass probe, which can react efficiently with acidic plant hormones in acetonitrile containing triethylamine (TEA). The positively charged BTA-derivatives were separated by CE using amino-coated capillary, which provided a reversed electroosmotic flow (EOF) at low pH, as well as reduced the adsorption of BTA-derivatives on the inner wall of capillary. Using the CE-ESI-TOF-MS method developed in current study, 15 acidic plant hormones, including 10 gibberellins (GAs), were identified and quantified with good linearities from 1.3 to 850 ng/mL with linear coefficient R(2) values of >0.99. The limits of detection (LODs) were in the range of 0.34-4.59 ng/mL. Recoveries of compounds from spiked beverage samples ranged from 84.6 to 112.2%. And a good reproducibility was obtained by evaluating the intra and inter-day precisions with relative standard deviations (RSDs) less than 6.7 and 9.9%, respectively.     

Effects of dimethyl sulfoxide on catalysis in Escherichia coli F1-ATPase.

(1) Dimethyl sulfoxide (DMSO) markedly inhibited the Vmax of multisite ATPase activity in Escherichia coli F1-ATPase at concentrations greater than 30% (v/v). Vmax/KM was reduced by 2 orders of magnitude in 40% (v/v) DMSO at pH 7.5, primarily due to reduction of Vmax. The inhibition was rapidly reversed on dilution into aqueous buffer. (2) KdATP at the first, high-affinity catalytic site was increased 1500-fold from 2.3 x 10(-10) to 3.4 x 10(-7) M in 40% DMSO at pH 7.5, whereas KdADP was increased 3.2-fold from 8.8 to 28 microM. This suggests that the high-affinity catalytic site presents a hydrophobic environment for ATP binding in native enzyme, that there is a significant difference between the conformation for ADP binding as opposed to ATP binding, and that the ADP-binding conformation is more hydrophilic. (3) Rate constants for hydrolysis and resynthesis of bound ATP in unisite catalysis were slowed approximately 10-fold by 40% DMSO; however, the equilibrium between bound Pi/bound ATP was little changed. The reduction in catalysis rates may well be related to the large increase in KdATP (less constrained site). (4) Significant Pi binding to E. coli F1 could not be detected either in 40% DMSO or in aqueous buffer using a centrifuge column procedure. (5) We infer, on the basis of the measured constants KaATP, K2 (hydrolysis/resynthesis of ATP), k+3 (Pi release), and KdADP and from estimates of k-3 (Pi binding) that delta G for ATP hydrolysis in 40% DMSO-containing pH 7.5 buffer is between -9.2 and -16.8 kJ/mol.