Discrimination of cognate and noncognate substrates at the active site of class I lysyl-tRNA synthetase

The aminoacyl-tRNA synthetases are divided into two unrelated structural classes, with lysyl-tRNA synthetase (LysRS) being the only enzyme represented in both classes. On the basis of the structure of l-lysine complexed with Pyrococcus horikoshii class I LysRS (LysRS1) and homology to glutamyl-tRNA synthetase (GluRS), residues implicated in amino acid recognition and noncognate substrate discrimination were systematically replaced in Borrelia burgdorferi LysRS1. The catalytic efficiency of steady-state aminoacylation (k(cat)/K(M)) with lysine by LysRS1 variants fell by 1-4 orders of magnitude compared to that of the wild type. Disruption of putative hydrogen bonding interactions through replacement of G29, T31, and Y269 caused up to 1500-fold reductions in k(cat)/K(M), similar to changes previously observed for comparable variants of class II LysRS (LysRS2). Replacements of W220 and H242, both of which are implicated in hydrophobic interactions with the side chain of lysine, resulted in more dramatic changes with up to 40000-fold reductions in k(cat)/K(M) observed. This indicates that the more compact LysRS1 active site employs both electrostatic and hydrophobic interactions during lysine discrimination, explaining the ability of LysRS1 to discriminate against noncognate substrates accepted by LysRS2. Several of the LysRS1 variants were found to be more specific than the wild type with respect to noncognate amino acid recognition but less efficient in cognate aminoacylation. This indicates that LysRS1 compromises between efficient catalysis and substrate discrimination, in contrast to LysRS2 which is considerably more effective in catalysis but is less specific than its class I counterpart.     

Crystal structure of lysine sulfonamide inhibitor reveals the displacement of the conserved flap water molecule in human immunodeficiency virus type 1 protease

Human immunodeficiency virus type 1 (HIV-1) protease has been continuously evolving and developing resistance to all of the protease inhibitors. This requires the development of new inhibitors that bind to the protease in a novel fashion. Most of the inhibitors that are on the market are peptidomimetics, where a conserved water molecule mediates hydrogen bonding interactions between the inhibitors and the flaps of the protease. Recently a new class of inhibitors, lysine sulfonamides, was developed to combat the resistant variants of HIV protease. Here we report the crystal structure of a lysine sulfonamide. This inhibitor binds to the active site of HIV-1 protease in a novel manner, displacing the conserved water and making extensive hydrogen bonds with every region of the active site.     

In silico study on the effect of surface lysines and arginines on the electrostatic interactions and protein stability

Charged amino acids are mostly exposed on a protein surface, thereby forming a network of interactions with the surrounding amino acids as well as with water. In particular, positively charged arginine and lysine have different side chain geometries and provide a different number of potential electrostatic interactions. This study reports a comparative analysis of the difference in the number of two representative electrostatic interactions, such as salt-bridges and hydrogen bonds, contributed by surface arginine and lysine, as well as their effect on protein stability using molecular modeling and dynamics simulation techniques. Two in silico variants, the R variant with all arginines and the K variant with all lysines on the protein surface, were modeled by mutating all the surface lysines to arginines and the surface arginines to lysines, respectively, for each of the 10 model proteins. A structural comparison of the respective two variants showed that the majority of R variants possessed more salt-bridges and hydrogen bond interactions than the K variants, indicating that arginine provides a higher probability of electrostatic interactions than lysine owing to its side chain geometry. Molecular dynamics simulations of these variants revealed the R variants to be more stable than the K variants at room temperature but this effect was not prominent under protein denaturating conditions, such as 353 and 333 K with 8 M urea. These results suggest that the arginine residues on a protein surface contribute to the protein stability slightly more than lysine by enhancing the electrostatic interactions.     

A study on the effect of surface lysine to arginine mutagenesis on protein stability and structure using green fluorescent protein

Two positively charged basic amino acids, arginine and lysine, are mostly exposed to protein surface, and play important roles in protein stability by forming electrostatic interactions. In particular, the guanidinium group of arginine allows interactions in three possible directions, which enables arginine to form a larger number of electrostatic interactions compared to lysine. The higher pKa of the basic residue in arginine may also generate more stable ionic interactions than lysine. This paper reports an investigation whether the advantageous properties of arginine over lysine can be utilized to enhance protein stability. A variant of green fluorescent protein (GFP) was created by mutating the maximum possible number of lysine residues on the surface to arginines while retaining the activity. When the stability of the variant was examined under a range of denaturing conditions, the variant was relatively more stable compared to control GFP in the presence of chemical denaturants such as urea, alkaline pH and ionic detergents, but the thermal stability of the protein was not changed. The modeled structure of the variant indicated putative new salt bridges and hydrogen bond interactions that help improve the rigidity of the protein against different chemical denaturants. Structural analyses of the electrostatic interactions also confirmed that the geometric properties of the guanidinium group in arginine had such effects. On the other hand, the altered electrostatic interactions induced by the mutagenesis of surface lysines to arginines adversely affected protein folding, which decreased the productivity of the functional form of the variant. These results suggest that the surface lysine mutagenesis to arginines can be considered one of the parameters in protein stability engineering.     

An electrostatic/hydrogen bond switch as the basis for the specific interaction of phosphatidic acid with proteins

Phosphatidic acid (PA) is a minor but important phospholipid that, through specific interactions with proteins, plays a central role in several key cellular processes. The simple yet unique structure of PA, carrying just a phosphomonoester head group, suggests an important role for interactions with the positively charged essential residues in these proteins. We analyzed by solid-state magic angle spinning 31P NMR and molecular dynamics simulations the interaction of low concentrations of PA in model membranes with positively charged side chains of membrane-interacting peptides. Surprisingly, lysine and arginine residues increase the charge of PA, predominantly by forming hydrogen bonds with the phosphate of PA, thereby stabilizing the protein-lipid interaction. Our results demonstrate that this electrostatic/hydrogen bond switch turns the phosphate of PA into an effective and preferred docking site for lysine and arginine residues. In combination with the special packing properties of PA, PA may well be nature's preferred membrane lipid for interfacial insertion of positively charged membrane protein domains.     

Targeting lysine specific demethylase 4A (KDM4A) tandem TUDOR domain – A fragment based approach

The tandem TUDOR domains present in the non-catalytic C-terminal half of the KDM4A, 4B and 4C enzymes play important roles in regulating their chromatin localizations and substrate specificities. They achieve this regulatory role by binding to different tri-methylated lysine residues on histone H3 (H3-K4me3, H3-K23me3) and histone H4 (H4-K20me3) depending upon the specific chromatin environment. In this work, we have used a 2D-NMR based fragment screening approach to identify a novel fragment (1a), which binds to the KDM4A-TUDOR domain and shows modest competition with H3-K4me3 binding in biochemical as well as in vitro cell based assays. A co-crystal structure of KDM4A TUDOR domain in complex with 1a shows that the fragment binds stereo-specifically to the methyl lysine binding pocket forming a network of strong hydrogen bonds and hydrophobic interactions. We anticipate that the fragment 1a can be further developed into a novel allosteric inhibitor of the KDM4 family of enzymes through targeting their C-terminal tandem TUDOR domain.     

Structural studies of lysyl-tRNA synthetase: conformational changes induced by substrate binding

Lysyl-tRNA synthetase is a member of the class II aminoacyl-tRNA synthetases and catalyses the specific aminoacylation of tRNA(Lys). The crystal structure of the constitutive lysyl-tRNA synthetase (LysS) from Escherichia coli has been determined to 2.7 A resolution in the unliganded form and in a complex with the lysine substrate. A comparison between the unliganded and lysine-bound structures reveals major conformational changes upon lysine binding. The lysine substrate is involved in a network of hydrogen bonds. Two of these interactions, one between the alpha-amino group and the carbonyl oxygen of Gly 216 and the other between the carboxylate group and the side chain of Arg 262, trigger a subtle and complicated reorganization of the active site, involving the ordering of two loops (residues 215-217 and 444-455), a change in conformation of residues 393-409, and a rotation of a 4-helix bundle domain (located between motif 2 and 3) by 10 degrees. The result of these changes is a closing up of the active site upon lysine binding.     

Evidence for hydrogen bond formation to the PsaB chlorophyll of P700 in photosystem I mutants of Synechocystis sp. PCC 6803

P700, the primary electron donor of photosystem I, is an asymmetric dimer made of one molecule of chlorophyll a' (P(A)) and one of chlorophyll a (P(B)) that are bound to the homologous PsaA and PsaB polypeptides. While the carbonyl groups of P(A) are involved in hydrogen-bonding interactions with several surrounding amino acid side chains and a water molecule, P(B) does not engage hydrogen bonds with the protein. Notably, the residue Thr A739 is donating a strong hydrogen bond to the 9-keto C=O group of P(A) and the homologous residue Tyr B718 is free from interaction with P(B). Light-induced FTIR difference spectroscopy of the photooxidation of P700 has been combined with a site-directed mutagenesis attempt to introduce hydrogen bonds to the carbonyl groups of P(B) in Synechocystis sp. PCC 6803. The FTIR study of the Y(B718)T mutant provides evidence that the 9-keto C=O group of P(B) and P(B)(+) engages a relatively strong hydrogen-bonding interaction with the surroundings in a significant fraction (40 +/-10%) of the reaction centers. Additional mutations on the two PsaB residues homologous to those involved in the main interactions between the PsaA polypeptide and the 10a-carbomethoxy groups of P(A) affect only marginally the vibrational frequency of the 10a-ester C=O group of P(B). The FTIR data on single, double, and triple mutants at these PsaB sites indicate a plasticity of the interactions of the carbonyl groups of P(B) with the surrounding protein. However, these mutations do not perturb the hydrogen-bonding interactions assumed by the 9-keto and 10a-ester C=O groups of P(A) and P(A)(+) with the protein and have only a limited effect on the relative charge distribution between P(A)(+) and P(B)(+).     

Lysine 2,3-aminomutase. Support for a mechanism of hydrogen transfer involving S-adenosylmethionine

The conversion of L-lysine to L-beta-lysine is catalyzed by lysine 2,3-aminomutase. The reaction involves the interchange of the 2-amino group of lysine with a hydrogen at carbon 3. As such the reaction is formally analogous to adenosylcobalamin-dependent rearrangements. However, the enzyme does not contain and is not activated by this coenzyme. Instead it contains iron and pyridoxal phosphate and is activated by S-adenosylmethionine. Earlier experiments implicated adenosyl-C-5' of S-adenosylmethionine in the hydrogen transfer mechanism, apparently in a role similar or analogous to that of adenosyl moiety of adenosylcobalamin in the B12-dependent rearrangements. The question of whether both hydrogens or only one hydrogen at adenosyl-C-5' participate in the hydrogen-transfer process has been addressed by carrying out the lysine 2,3-aminomutase reaction with S-[5'-3H] adenosylmethionine in the presence of 10 times its molar concentration of enzyme. Under these conditions all of the tritium appeared in lysine and beta-lysine, showing that C-5'-hydrogens participate. To determine whether hydrogen transfer is compulsorily intermolecular and intramolecular, various molar ratios of [3,3-2H2]lysine and unlabeled lysine were submitted to the action of lysine 2,3-aminomutase under conditions in which 10-15% conversion to beta-lysine occurred. Mass spectral analysis of the beta-lysine for monodeutero and dideutero species showed conclusively that hydrogen transfer is both intramolecular and intermolecular. The results quantitatively support our postulate that activation of the enzyme involves a transformation of S-adenosylmethionine into a form that promotes the generation of an adenosyl-5' free radical, which abstracts hydrogen from lysine to form 5'-deoxyadenosine as an intermediate.     

Reductive methylation of lysine residues of botulinum neurotoxin types A and B

Summary Reductive methylation of botulinum neurotoxin (NT) serotypes A and B at various ratios of protein to reagent modified up to 75° 10 of the lysine residues. Amino acid analysis of the modified proteins (HCl hydrolysed) confirmed selective modifications of lysine. The derivative N,N-dimethyl lysine was more abundant than monomethyl lysine; trimethyl lysine was not detected. Distribution of modified lysine residues among the heavy and light chains (M_r 100000 and 50000, respectively) of the dichain type A NT (M_r 150000) was approximately proportional to the lysine contents of the two subunit chains of the NT. Toxicity (mouse lethality) and serological reactivity (polyclonal antibody) of serotype A NT were not (or insignificantly) damaged following methylation of up to 72 lysine residues. Modification of 3 additional residues caused precipitous loss in toxicity. Toxicity of serotype B NT, unlike type A, appeared more sensitive to lysine modification. The large number of lysine residues that can be methylated without damaging toxicity of type A NT can be exploited to a) radiolabel the dichain protein exclusively in one chain keeping the other chain unlabelled, b) restrict the number of tryptic cleavage sites of the NT, and c) tag the protein with various markers or reactive ligands.     

Interaction of arginine,lysine, and guanidine with surface residues of lysozyme: implication to protein stability

Additives are widely used to suppress aggregation of therapeutic proteins. However, the molecular mechanisms of effect of additives to stabilize proteins are still unclear. To understand this, we herein perform molecular dynamics simulations of lysozyme in the presence of three commonly used additives: arginine, lysine, and guanidine. These additives have different effects on stability of proteins and have different structures with some similarities; arginine and lysine have aliphatic side chain, while arginine has a guanidinium group. We analyze atomic contact frequencies to study the interactions of the additives with individual residues of lysozyme. Contact coefficient, quantified from contact frequencies, is helpful in analyzing the interactions with the guanidine groups as well as aliphatic side chains of arginine and lysine. Strong preference for contacts to the additives (over water) is seen for the acidic followed by polar and the aromatic residues. Further analysis suggests that the hydration layer around the protein surface is depleted more in the presence of arginine, followed by lysine and guanidine. Molecular dynamics simulations also reveal that the internal dynamics of protein, as indicated by the lifetimes of the hydrogen bonds within the protein, changes depending on the additives. Particularly, we note that the side-chain hydrogen-bonding patterns within the protein differ with the additives, with several side-chain hydrogen bonds missing in the presence of guanidine. These results collectively indicate that the aliphatic chain of arginine and lysine plays a critical role in the stabilization of the protein.     

Contribution of cation-pi interactions to the stability of protein-DNA complexes

Cation-pi interactions between an aromatic ring and a positive charge located above it have proven to be important in protein structures and biomolecule associations. Here, the role of these interactions at the interface of protein-DNA complexes is investigated, by means of ab initio quantum mechanics energy calculations and X-ray structure analyses. Ab initio energy calculations indicate that Na ions and DNA bases can form stable cation-pi complexes, whose binding strength strongly depends on the type of base, on the position of the Na ion, and whether the base is isolated or included in a double-stranded B-DNA. A survey of protein-DNA complex structures using appropriate geometrical criteria revealed cation-pi interactions in 71% of the complexes. More than half of the cation-pi pairs involve arginine residues, about one-third asparagine or glutamine residues that only carry a partial charge, and one-seventh lysine residues. The most frequently observed pair, which is also the most stable as monitored by ab initio energy calculations, is arginine- guanine. Arginine-adenine interactions are also favorable in general, although to a lesser extent, whereas those with thymine and cytosine are not. Our calculations show that the major contribution to cation-pi interactions with DNA bases is of electrostatic nature. These interactions often occur concomitantly with hydrogen bonds with adjacent bases; their strength is estimated to be from three to four times lower than that of hydrogen bonds. Finally, the role of cation-pi interactions in the stability and specificity of protein-DNA complexes is discussed.     

Involvement of lysine 1047 in type I collagen-mediated activation of polymorphonuclear neutrophils

Oxidative functions of polymorphonuclear neutrophils (PMNs), which play a deciding role in the phagocytosis process, are stimulated by extracellular matrix proteins such as type I collagen. Previous studies have demonstrated the involvement of a DGGRYY sequence located within the alpha(1) chain C-terminal telopeptide in type I collagen-induced PMN activation, but so far the mechanism has not been completely elucidated. We have recently demonstrated that collagen carbamylation (i.e. post-translational binding of cyanate to lysine epsilon-NH(2) groups) impairs PMN oxidative functions, suggesting the potential involvement of lysine residues in this process. The present study was devoted to the identification of lysine residues involved in the collagen-induced activation of PMNs. The inhibition of PMN activation by collagen in the presence of 6-amino-hexanoic acid, a structural analogue of lysine residues, confirmed the involvement of specific lysine residues. Modification of lysine residues by carbamylation demonstrated that only one residue, located within the alpha(1)CB6 collagen peptide, was involved in this mechanism. A recombinant alpha(1)CB6 peptide, designed for the substitution of lysine 1047 by glycine, exhibited decreased activity, demonstrating that the lysine residue at position 1047 within the collagen molecule played a significant role in the mechanism of activation. These results help to understand in more detail the collagen-mediated PMN activation mechanism and confirm the prominent involvement of lysine residues in interactions between extracellular matrix proteins and inflammatory cells.     

Staggered molecular packing in crystals of a collagen-like peptide with a single charged pair

The crystal structure of the triple-helical peptide, (Pro-Hyp-Gly)(4)-Glu-Lys-Gly-(Pro-Hyp-Gly)(5) has been determined to 1.75 A resolution. This peptide was designed to examine the effect of a pair of adjacent, oppositely charged residues on collagen triple-helical conformation and intermolecular interactions. The molecular conformation (a 7(5) triple helix) and hydrogen bonding schemes are similar to those previously reported for collagen triple helices and provides a second instance of water mediated N--H . . . O==C interchain hydrogen bonds for the amide group of the residue following Gly. Although stereochemically capable of forming intramolecular or intermolecular ion pairs, the lysine and glutamic acid side-chains instead display direct interactions with carbonyl groups and hydroxyproline hydroxyl groups or interactions mediated by water molecules. Solution studies on the EKG peptide indicate stabilization at neutral pH values, where both Glu and Lys are ionized, but suggest that this occurs because of the effects of ionization on the individual residues, rather than ion pair formation. The EKG structure suggests a molecular mechanism for such stabilization through indirect hydrogen bonding. The molecular packing in the crystal includes an axial stagger between molecules, reminiscent of that observed in D-periodic collagen fibrils. The presence of a Glu-Lys-Gly triplet in the middle of the sequence appears to mediate this staggered molecular packing through its indirect water-mediated interactions with backbone C==O groups and side chains.     

Crystal and molecular structure of L-valyl-L-lysine hydrochloride.

L-Valyl-L-lysine hydrochloride, C11N3O3H23 HCl, crystallizes in the monoclinic space group P2(1) with a = 5.438(5), b = 14.188(5), c = 9.521(5) A, beta = 95.38(2) degrees and Z = 2. The crystal structure, solved by direct methods, refined to R = 0.036, using full matrix least-squares method. The peptide exists in a zwitterionic form, with the N atom of the lysine side-chain protonated. The two gamma-carbons of the valine side-chain have positional disorder, giving rise to two conformations, chi 1(11) = -67.3 and 65.9 degrees, one of which (65.9 degrees) is sterically less favourable and has been found to be less popular amongst residues branching at beta-C. The lysine side-chain has the geometry of g- tgt, not seen in crystal structures of the dipeptides reported so far. Interestingly, chi 2(3) (63.6 degrees) of lysine side-chain has a gauche+ conformation unlike in most of the other structures, where it is trans. The neighbouring peptide molecules are hydrogen bonded in a head-to-tail fashion, a rather uncommon interaction in lysine peptide structures. The structure shows considerable similarity with that of L-Lys-L-Val HCl in conformational angles and H-bond interactions [4].     

Nuclear magnetic resonance and restrained molecular dynamics studies of the interaction of an epidermal growth factor-derived peptide with protein tyrosine phosphatase 1B

The epidermal growth factor-derived (EGFR988) fluorophosphonate peptide, DADE(F2Pmp)L, is a potent (30 pM) inhibitor of the protein tyrosine phosphatase PTP1B. Nuclear magnetic resonance (NMR) transferred nuclear Overhauser effect (nOe) experiments have been used to determine the conformation of DADE(F2Pmp)L while bound in the active site of PTP1B. When bound, the peptide adopts an extended beta-strand conformation. Molecular modeling and molecular dynamics simulations allowed the elucidation of the sources of many of the interactions leading to binding of this inhibitor. Electrostatic, hydrophobic, and hydrogen-bonding interactions were all found to contribute significantly to its binding. However, despite the overall tight binding of this inhibitor, the N-terminal and adjacent residue of the peptide were virtually unrestrained in their motion. The major contributions to binding arose from hydrophobic interactions at the leucine and at the aromatic center, hydrogen bonding to the pro-R fluorine of the fluorophosphonomethyl group, and electrostatic interactions involving the carboxylate functionalities of the aspartate and glutamate residues. These latter two residues were found to form tight contacts with surface recognition elements (arginine and lysine) situated near the active-site cleft.     

Transport of neutral, cationic and anionic amino acids by systems B, b(o,+), X(AG), and ASC in swine small intestine

Amino acid influx across the brush border membrane of the intact pig ileal epithelium was studied. It was examine whether in addition to system B, systems ASC and b(o,+) were involved in transport of bipolar amino acids. The kinetics of interactions between lysine and leucine demonstrates that system b(o,+) is present and accessible also to L-glutamine. D-aspartate (K(1/2) 0.3 mM) and L-glutamate (K(i) 0.5 mM) share a high affinity transporter with a maximum rate of 1.3 micromol cm(-2) h(-1), while only L-glutamate with a K(1/2) of 14.4 mM uses a low affinity transporter with a maximum rate of 2. 7 micromol cm(-2) h(-1), system ASC, against which serine has a K(i) of 1.6 mM. In the presence of 100 mM lysine, L-glutamine (A), leucine (B), and methionine (C) fulfilled the criteria of the ABC test for transport by one and the same transporter. However, serine inhibits not only transport of L-glutamate but also of glutamine (K(i) 0.5 mM), and L-glutamate inhibits part of the transport of glutamine. The test does, therefore, only indicate that the three bipolar amino acids have similar affinities for transport by systems B and ASC. Further study of the function of system B must be carried out under full inhibition by lysine and glutamate.     

The heparin binding site of human extracellular-superoxide dismutase.

Extracellular-superoxide dismutase (EC-SOD) is a secretory glycoprotein that is major SOD isozyme in extracellular fluids. We revealed the possible structure of the carbohydrate chain of serum EC-SOD with the serial lectin affinity technique. The structure is a biantennary complex type with an internal fucose residue attached to asparagine-linked N-acetyl-D-glucosamine and with terminal sialic acid linked to N-acetyllactosamine. EC-SOD in plasma is heterogeneous with regard to heparin affinity and can be divided into three fractions: A, without affinity; B, with intermediate affinity; and C, with high affinity. It appeared that this heterogeneity is not dependent on the carbohydrate structure upon comparison of EC-SOD A, B, and C. No effect of the glycopeptidase F treatment of EC-SOD C on its heparin affinity supported the results. A previous report showed that both lysine and arginine residues probably at the C-terminal end, contribute to heparin binding. Recombinant EC-SOD C treated with trypsin or endoproteinase Lys C, which lost three lysine residues (Lys-211, Lys-212, and Lys-220) or one lysine residue (Lys-220) at the C-terminal end, had no or weak affinity for the heparin HPLC column, respectively. The proteinase-treated r-EC-SOD C also lost triple arginine residues which are adjacent to double lysine residues. These results suggest that the heparin-binding site may occur on a "cluster" of basic amino acids at the C-terminal end of EC-SOD C. EC-SOD is speculated to be primarily synthesized as type C, and types A and B are probably the result of secondary modifications. It appeared that the proteolytic cleavage of the exteriorized lysine- and arginine-rich C-terminal end in vivo is a more important contributory factor to the formation of EC-SOD B and/or EC-SOD A.     

Importance of hydrophobic and polar residues in ligand binding in the family 15 carbohydrate-binding module from Cellvibrio japonicus Xyn10C

Modular glycoside hydrolases that degrade the plant cell wall often contain noncatalytic carbohydrate-binding modules (CBMs) that interact with specific polysaccharides within this complex macromolecule. CBMs, by bringing the appended catalytic module into intimate and prolonged association with the substrate, increase the rate at which these enzymes are able to hydrolyze glycosidic bonds. Recently, the crystal structure of the family 15 CBM (CBM15) from Cellvibrio japonicus (formerly Pseudomonas cellulosa) Xyn10C was determined in complex with the ligand xylopentaose. In this report we have used a rational design approach, informed by the crystal structure of the CBM15-ligand complex, to probe the importance of hydrophobic stacking interactions and both direct and water-mediated hydrogen bonds in the binding of this protein to xylan and xylohexaose. The data show that replacing either Trp 171 or Trp 186, which stack against xylose residues n and n + 2 in xylopentaose, with alanine abolished ligand binding. Similarly, replacing Asn 106, Gln 171, and Gln 217, which make direct hydrogen bonds with xylopentaose, with alanine greatly reduced the affinity of the protein for its saccharide ligands. By contrast, disrupting water-mediated hydrogen bonds between CBM15 and xylopentaose by introducing the mutations S108A, Q167A, Q221A, and K223A had little effect on the affinity of the protein for xylan or xylohexaose. These data indicate that CBM15 binds xylan and xylooligosaccharides via the same interactions and provide clear evidence that direct hydrogen bonds are a key determinant of affinity in a type B CBM. The generic importance of these data is discussed.     

Structural basis of phospholipase activity of Staphylococcus hyicus lipase

Staphylococcus hyicus lipase differs from other bacterial lipases in its high phospholipase A1 activity. Here, we present the crystal structure of the S. hyicus lipase at 2.86 A resolution. The lipase is in an open conformation, with the active site partly covered by a neighbouring molecule. Ser124, Asp314 and His355 form the catalytic triad. The substrate-binding cavity contains two large hydrophobic acyl chain-binding pockets and a shallow and more polar third pocket that is capable of binding either a (short) fatty acid or a phospholipid head-group. A model of a phospholipid bound in the active site shows that Lys295 is at hydrogen bonding distance from the substrate's phosphate group. Residues Ser356, Glu292 and Thr294 hold the lysine in position by hydrogen bonding and electrostatic interactions. These observations explain the biochemical data showing the importance of Lys295 and Ser356 for phospholipid binding and phospholipase A1 activity.