Binding of a neuropeptide, substance P, to neutral and negatively charged lipids

The binding of substance P (SP), a positively charged neurotransmitter peptide, to neutral and to negatively charged phospholipids has been investigated by means of a monolayer technique. Monolayers formed at room temperature from 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG) or 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), or mixtures of the two, were maintained throughout the course of a binding experiment at a constant surface pressure while the monolayer surface area was monitored. Injection of SP into the aqueous subphase (154 mM NaCl, 10 mM Tris adjusted to pH 7.4) led to an expansion of the monolayer surface area that was attributed to a spontaneous insertion of SP between the lipid molecules. A quantitative evaluation of the area increase at constant pressure yielded SP insertion isotherms that showed that levels of SP insertion increased directly with the monolayer POPG content and decreased to negligible levels at surface pressures above 35 +/- 1 mN/m. If electrostatic effects were ignored, these data showed biphasic behavior in Scatchard plots. The apparent binding constants ranged, at 20 mN/m, from (3.2 +/- 0.3) X 10(4) M-1 for 100% POPG monolayers to (2.0 +/- 0.05) X 10(3) M-1 for 25% POPG/75% POPC monolayers. At 32 mN/m, a monolayer surface pressure that mimics bilayer conditions, the apparent binding constant for a 100% POPG monolayer was measured to be (1.1 +/- 0.05) X 10(3) M-1. However, for a monolayer containing only 25% charged lipids, corresponding to a natural membrane composition, K app at 32 mN/m was estimated to be at most 41 M-1.(ABSTRACT TRUNCATED AT 250 WORDS)     

Merocyanine 540 as a probe to monitor the molecular packing of phosphatidylcholine: a monolayer epifluorescence microscopy and spectroscopy study.

The characteristics of the fluorescent dye, merocyanine 540 (MC-540), incorporated in monolayers of 1,2-dipalmitoyl-phosphatidylcholine (DPPC), and 1-palmitoyl-2-oleoylphosphatidylcholine (POPC) were studied in different states of molecular packing. Conditions for phase separation in these monolayers were defined by their pressure/area (pi-A) isotherms. Within the liquid expanded (LE) and the liquid condensed (LC) coexisting phases of DPPC monolayers, low light level epifluorescence microscopy revealed 'dark' discoid domains embedded in a 'bright' matrix. Under the same conditions, and at temperatures as low as 12 degrees C, the pi-A isotherms of POPC demonstrate the existence of a single phase, and no fluorescent domains were observed. Fluorescence spectra of MC-540 labelled monolayers, recorded in different structural states, reveal three distinct emission peaks: a 572 nm peak, present for monolayer packing conditions at low surface pressures; a 585 nm peak, similar to that obtained from dye molecules in fluid phase lipid bilayers, and observed here within the respective area/molecule ranges of 54-62 A2 and 62-69 A2 for monolayers of DPPC and POPC with diminishing intensity at increasing surface pressure; and finally, a peak at 560 nm, which predominates in densely packed POPC monolayers. Our results are interpreted on the basis of dye partitioning between monolayer and subphase, and different orientations of the dye with respect to the monolayer in various structural states. The usefulness of MC-540 to differentiate lipid packing in cell membranes is discussed.     

Influence of lipid saturation grade and headgroup charge: a refined lung surfactant adsorption model

Rapid adsorption of surfactant material to the air/liquid interface of the lung is essential for maintaining normal lung function. The detailed mechanism of this process, however, remains unclear. In this study, we elucidate the influence of lipid saturation grade and headgroup charge of surface layer lipids on surfactant protein (SP)-induced vesicle insertion into monolayers spread at the air/water interface of a film balance. We used dipalmitoylphosphatidlycholine (DPPC),1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol (DPPG), 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG) as monolayer lipids doped with either hydrophobic surfactant-specific protein SP-B or SP-C (0.2 and 0.4 mol %, respectively). Vesicles consisting of DPPC/DPPG (4:1, mol ratio) were injected into a stirred subphase to quantify adsorption kinetics. Based on kinetic film balance and fluorescence measurements, a refined model describing distinct steps of vesicle adsorption to surfactant monolayers is presented. First, in a protein-independent step, lipids from vesicles bridged to the interfacial film by Ca²⁺ ions are inserted into defects of a disordered monolayer at low surface pressures. Second, in a SP-facilitated step, active material insertion involving an SP-B- or SP-C-induced flip-flop of lipids occurs at higher surface pressures. Negatively charged lipids obviously influence the threshold pressures at which this second protein-mediated adsorption mechanism takes place.     

A Langmuir film approach to elucidating interactions in lipid membranes: 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine/cholesterol/metal cation systems

The interactions between two membrane lipids, 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE) and cholesterol (CHOL), were studied in Langmuir films using surface pressure isotherms and Brewster angle microscopy. The DPPE/CHOL interactions were probed for chosen monolayer and subphase (Na(+), Ca(2+)) composition at 20, 25, and 30 degrees C. The results obtained show that DPPE and CHOL are miscible for the cholesterol mol fractions x(CHOL)=0.3-0.5. Cholesterol induces condensation of the DPPE monolayers. The most significant condensation of the DPPE/CHOL monolayers was observed in the presence of Ca(2+) ions in the subphase at x(CHOL)=0.4. The negative deviation of the molecular surface area (MMA) additivity from the ideal behavior together with negative values of excess free enthalpy of mixing in the monolayers were interpreted in terms of attractive interactions between lipid molecules.     

The impact of fluoxetine and pH values on relaxation of the ternary lipid monolayers

Fluoxetine (FLX), used in the clinic to treat depression, is a well-known cationic amphiphilic antidepressant. To get a deeper insight into the effect of FLX on Langmuir monolayers, in this study the stability and relaxation of 1,2-dioctadecanoyl-sn-glycero-3-phophocholine/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine/cholesterol (DSPC/POPC/CHOL) monolayers without and with FLX at different pH values were studied. The experiments involved surface pressure-area (π-A) measurements, mean molecular area-time (A-t) measurements, and atomic force microscope (AFM) analysis. It was found that intermolecular interactions decreased after the addition of FLX in the subphase but increased with increasing pH values. The relaxation of the ternary lipid monolayers with FLX was dominated by dissolution steps, and the dissolution rates decreased with increasing pH values. These findings can be easily confirmed by the analysis of thermodynamic parameters calculated for the investigated films. The data obtained in this study help to understand the effect of drugs on the ternary lipid monolayers from the molecular point of view.     

Fluorocholesterols, in contrast to hydroxycholesterols, exhibit interfacial properties similar to cholesterol

We used an automated Langmuir-Pockels surface balance to characterize the air-water interfacial properties of cholesterol (CH) and its derivatives with hydrophilic OH and F substitutions at isologous sites on the sterol body or side chain. We studied 6-fluorocholesterol, 25-fluorocholesterol, 25,26,26,26,27,27,27-heptafluorocholesterol, 7alpha-hydroxycholesterol, 7beta-hydroxycholesterol, 25-hydroxycholesterol and 27-hydroxycholesterol, alone and in mixtures with 1-palmitoyl-2-oleoyl-sn-3-glycero-phosphocholine (POPC). Pressure;-area isotherms of the fluorocholesterols were essentially indistinguishable from CH and all condensed POPC monomolecular layers (monolayers) to variable degrees. Both nucleus-substituted hydroxycholesterols formed expanded monolayers, with lift-offs from baseline 22-26 A(2)/molecule larger than CH, suggesting interfacial tilting; furthermore, in binary mixtures, they condensed POPC monolayers less than CH. In contrast, the side chain hydroxylated CHs were oriented horizontally in the interface at large molecular areas, and became vertical below 140 A(2)/molecule with the side chain-OH rather than 3-OH group anchored in the subphase, as evidenced by low collapse pressures and smaller molecular areas than CH. Both side chain hydroxycholesterols expanded POPC monolayers at molar ratios <30%, but induced condensation with higher ratios, suggesting that OH-acyl chain (POPC) repulsion is superceded at higher mole fractions by lateral phase separation and intersteroidal H-bonding. These studies predict that fluorocholesterols should exhibit intramembrane spatial occupancy nearly identical to CH, whereas nucleus and especially side chain hydroxycholesterols will perturb membrane lipid packing notably.     

Study of calix[4]resorcinarene-dopamine complexation in mixed phospholipid monolayers formed at the air-water interface

We have studied the physical properties of monolayers formed by calix[4]resorcinarene and in mixtures with dipalmitoyl phosphatidylcholine (DPPC) in various molar ratios formed at the air-water interface and at presence of dopamine in water subphase by means of measurements of surface pressure and dipole potential. We showed that both calix[4]resorcinarene as well as its mixture with DPPC form stable monolayers at the water subphase. The presence of dopamine resulted in an increase of the mean molecular area and in a decrease of the compressibility modulus of the monolayers. For mixed monolayers at higher content of calix[4]resorcinarene (> 0.2 molar fraction) a deviation from ideal miscibility took place especially for monolayers in a solid state. This can be connected with formation of aggregates of calix[4] resorcinarene. Lowest miscibility and weakest interaction of dopamine with a monolayer was observed for calix[4]resorcinarene molar fraction of 0.33 in the monolayer.     

Atomic force microscopy and force spectroscopy study of Langmuir-Blodgett films formed by heteroacid phospholipids of biological interest

Langmuir-Blodgett (LB) films of two heteroacid phospholipids of biological interest 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), as well as a mixed monolayer with chi(POPC)=0.4, were transferred onto mica in order to investigate by a combination of atomic force microscopy (AFM) and force spectroscopy (FS) their height, and particularly, their nanomechanical properties. AFM images of such monolayers extracted at 30 mN m(-1) revealed a smooth and defect-free topography except for the POPE monolayer. Since scratching such soft monolayers in contact mode was proved unsuccessful, their molecular height was measured by means of the width of the jump present in the respective force-extension curves. While for pure POPC a small jump occurs near zero force, for the mixed monolayer with chi(POPC)=0.4 the jump occurs at approximately 800 pN. Widths of approximately 2 nm could be established for POPC and chi(POPC)=0.4, but not for POPE monolayer at this extracting pressure. Such different mechanical stability allowed us to directly measure the threshold area/lipid range value needed to induce mechanical stability to the monolayers. AFM imaging and FS were next applied to get further structural and mechanical insight into the POPE phase transition (LC-LC') occurring at pressures >36.5 mN m(-1). This phase transition was intimately related to a sudden decrease in the area/molecule value, resulting in a jump in the force curve occurring at high force ( approximately 1.72 nN). FS reveals to be the unique experimental technique able to unveil structural and nanomechanical properties for such soft phospholipid monolayers. The biological implications of the nanomechanical properties of the systems under investigation are discussed considering that the annular phospholipids region of some transmembrane proteins is enriched in POPE.     

Lateral organization of GM1 in phase-separated monolayers visualized by scanning force microscopy

Phase separation of glycolipids in lipid mono- and bilayers is of great interest for the understanding of membrane function. The distribution of the ganglioside GM1 in sphingomyelin (SM)/1-palmitoyl-2-oleoyl- sn-glycero-3-phosphocholine (POPC), SM/1,2-dipalmitoyl- sn-glycero-3-phosphocholine (DOPC) and SM/cholesterol/POPC Langmuir-Blodgett (LB) monolayers transferred at 36 mN/m has been studied by scanning force microscopy. Besides lateral organization of the glycolipid in LB monolayers as deduced from topography, material properties have been investigated by phase imaging, pulsed force mode and force modulation microscopy. It was shown that GM1 preferentially clusters in an ordered lipid matrix, i.e. the SM phase in the case of the SM/POPC and SM/DOPC mixture or in the ordered phase of POPC/SM/cholesterol monolayers. At higher local concentrations, three-dimensional protrusions enriched in GM1 occur, which may represent a precursor for the formation of micelles budding into the aqueous subphase. Electronic supplementary material to this paper can be obtained by using the Springer Link server located at http://dx.doi.org/10.1007/s00249-002-0232-4.     

Study of calix[4]resorcinarene-dopamine complexation in mixed phospholipid monolayers formed at the air-water interface

We have studied the physical properties of monolayers formed by calix[4]resorcinarene and in mixtures with dipalmitoyl phosphatidylcholine (DPPC) in various molar ratios formed at the air-water interface and at presence of dopamine in water subphase by means of measurements of surface pressure and dipole potential. We showed that both calix[4]resorcinarene as well as its mixture with DPPC form stable monolayers at the water subphase. The presence of dopamine resulted in an increase of the mean molecular area and in a decrease of the compressibility modulus of the monolayers. For mixed monolayers at higher content of calix[4]resorcinarene (> 0.2 molar fraction) a deviation from ideal miscibility took place especially for monolayers in a solid state. This can be connected with formation of aggregates of calix[4] resorcinarene. Lowest miscibility and weakest interaction of dopamine with a monolayer was observed for calix[4]resorcinarene molar fraction of 0.33 in the monolayer.     

Hexadecylphosphocholine interaction with lipid monolayers

The phospholipid analogue miltefosine or hexadecylphosphocholine (HePC) is a drug of high interest in the treatment for fatal visceral leishmaniasis (VL) due to Leishmania donovani particularly because of its activity by oral route. In this study, the interaction of HePC with a monolayer of beta-palmitoyl-gamma-oleyl-phosphatidylcholine (POPC) as membrane model or sterol (ergosterol or cholesterol) was investigated. At a constant pressure of 25 mN/m, the adsorption kinetics of HePC into the monolayers showed that HePC molecules are inserted into the monolayer of lipids as monomers until the critical micellar concentration (CMC). At HePC concentrations superior to the CMC, the micelles of HePC are deployed at the interface as groups of monomers into the POPC or sterol monolayer. The study of mixture of HePC/(POPC or sterol), spread at the air-water interface, shows that a simple miscibility between HePC and POPC is observed, whereas a high condensation appears between HePC and sterols showing a high affinity between HePC and sterols. In addition, HePC does not act as detergent disturbing membrane integrity.     

Asymmetric lipid bilayer formation stabilized by DNA at the air/water interface

The lipid bis(guanidinium)-tren-cholesterol (BGTC) is a cationic cholesterol derivative bearing guanidinium polar headgroups used for gene transfection either alone or formulated as liposomes with the zwitterionic lipid 1,2-di-[cis-9-octadecenoyl]-sn-glycero-3-phosphoethanolamine (DOPE). Previous investigations have shown its ability to strongly interact with DNA and form asymmetric lipid bilayers at the air/water interface when mixed with DOPE. Here, with a view to further investigate its physicochemical behavior, we studied the interactions of mixtures of BGTC with another zwitterionic lipid, 1,2-Dimyristoyl-sn-Glycero-3-Phosphocholine, (DMPC), with DNA at the air/water interface by using the Langmuir monolayer technique coupled with Brewster Angle Microscopy (BAM) and Polarization Modulation Infra Red Reflexion Absorption (PMIRRAS) spectroscopy and we investigate DNA–BGTC/DMPC interactions. We demonstrate that when DNA is injected into the subphase in excess compared to the positive charges of BGTC, it adsorbs to BGTC/DMPC monolayers at 20 mN/m whatever the lipid monolayer composition (1/5, 2/3 or 3/2 BGTC/DMPC molar ratio) and forms an incomplete monolayer of either isotropic or anisotropic double strands depending on the BGTC content in the monolayer. Compression beyond the collapse of some mixed DNA–BGTC/DMPC (2/3 and 3/2 molar ratio) systems leads to the formation of DNA monolayers underneath asymmetric lipid bilayers characterized by a bottom layer of BGTC in contact with DNA and a top layer mainly constituted of DMPC.     

Lamellar cationic lipid‐DNA complexes from lipids with a strong preference for planar geometry: A Minimal Electrostatic Model

We formulate and analyze a minimal model, based on condensation theory, of the lamellar cationic lipid (CL)‐DNA complex of alternately charged lipid bilayers and DNA monolayers in a salt solution. Each lipid bilayer, composed by a random mixture of cationic and neutral lipids, is assumed to be a rigid uniformly charged plane. Each DNA monolayer, located between two lipid bilayers, is formed by the same number of parallel DNAs with a uniform separation distance. For the electrostatic calculation, the model lipoplex is collapsed to a single plane with charge density equal to the net lipid and DNA charge. The free energy difference between the lamellar lipoplex and a reference state of the same number of free lipid bilayers and free DNAs, is calculated as a function of the fraction of CLs, of the ratio of the number of CL charges to the number of negative charges of the DNA phosphates, and of the total number of planes. At the isoelectric point the free energy difference is minimal. The complex formation, already favoured by the decrease of the electrostatic charging free energy, is driven further by the free energy gain due to the release of counterions from the DNAs and from the lipid bilayers, if strongly charged. This minimal model compares well with experiment for lipids having a strong preference for planar geometry and with major features of more detailed models of the lipoplex. © 2014 Wiley Periodicals, Inc. Biopolymers 101: 1114–1128, 2014.     

Hexadecylphosphocholine interaction with lipid monolayers

The phospholipid analogue miltefosine or hexadecylphosphocholine (HePC) is a drug of high interest in the treatment for fatal visceral leishmaniasis (VL) due to Leishmania donovani particularly because of its activity by oral route. In this study, the interaction of HePC with a monolayer of β-palmitoyl-γ-oleyl-phosphatidylcholine (POPC) as membrane model or sterol (ergosterol or cholesterol) was investigated. At a constant pressure of 25 mN/m, the adsorption kinetics of HePC into the monolayers showed that HePC molecules are inserted into the monolayer of lipids as monomers until the critical micellar concentration (CMC). At HePC concentrations superior to the CMC, the micelles of HePC are deployed at the interface as groups of monomers into the POPC or sterol monolayer. The study of mixture of HePC/(POPC or sterol), spread at the air-water interface, shows that a simple miscibility between HePC and POPC is observed, whereas a high condensation appears between HePC and sterols showing a high affinity between HePC and sterols. In addition, HePC does not act as detergent disturbing membrane integrity.     

Interaction of lipid vesicles with monomolecular layers containing lung surfactant proteins SP-B or SP-C

Pulmonary surfactant contains two families of hydrophobic proteins, SP-B and SP-C. Both proteins are thought to promote the formation of the phospholipid monolayer at the air-fluid interface of the lung. The Wilhelmy plate method was used to study the involvement of SP-B and SP-C in the formation of phospholipid monolayers. The proteins were either present in the phospholipid vesicles which were injected into the subphase or included in a preformed phospholipid monolayer. In agreement with earlier investigators, we found that SP-B and SP-C, present in phospholipid vesicles, were able to induce the formation of a monolayer, as became apparent by an increase in surface pressure. However, when the proteins were present in a preformed phospholipid monolayer (20 mN/m) at similar lipid to protein ratios, the rate of surface pressure increase after injection of pure phospholipid vesicles into the subphase at similar vesicle concentrations was 10 times higher. The process of phospholipid insertion from phospholipid vesicles into the protein-containing monolayers was dependent on (1) the presence of (divalent) cations, (2) the phospholipid concentration in the subphase, (3) the size of the phospholipid vesicles, (4) the protein concentration in the preformed monolayer, and (5) the initial surface pressure at which the monolayers were formed. Both in vesicles and in preformed monolayers, SP-C was less active than SP-B in promoting the formation of a phospholipid monolayer. The use of preformed monolayers containing controlled protein concentrations may allow more detailed studies on the mechanism by which the proteins enhance phospholipid monolayer formation from vesicles.     

Molecular determinants of the reversible membrane anchorage of the G-protein transducin.

Transducin is a heterotrimer formed by a fatty acylated alpha-subunit and a farnesylated betagamma-subunit. The role of these two covalent modifications and of adjacent hydrophobic and charged amino acid residues in reversible anchoring at disk model membranes is investigated at different pH values, salt concentrations, and lipid packing densities using the monolayer expansion technique and CD spectroscopy. The heterotrimer only binds if the acetylated alpha-subunit is transformed into its surface-active form by divalent cations. In the presence of salts the alpha(GDP)-subunit, the betagamma-complex, and the heterotrimer bind to POPC monolayers at 30 mN/m, estimated to mimic the lateral packing density of disk membranes, with apparent binding constants of Kapp = (1.1 +/- 0.3) x 10(6) M-1 (reflecting the penetration of the fatty acyl chain together with approximately three adjacent hydrophobic amino acid residues), Kapp = (3.5 +/- 0.5) x 10(6) M-1 (reflecting the penetration of the farnesyl chain), and Kapp = (1.6 +/- 0.3) x 10(6) M-1 (reflecting a major contribution of the alpha(GDP)-subunit with only a minor contribution from the betagamma-complex). The apparent binding constant of the alpha(GTP)-subunit is distinctly smaller than that of the alpha(GDP)-subunit. Binding to negatively charged POPC/POPG (75/25 mole/mole) monolayers is reinforced by 2-3 cationic residues for the betagamma-complex. The alpha-subunit shows no electrostatic attraction and the heterotrimer shows even a slight electrostatic repulsion which becomes the dominating force in the absence of salts.     

Interactions of mitochondrial precursor protein apocytochrome c with phosphatidylserine in model membranes. A monolayer study

(1) The interaction of apocytochrome c with different molecular species of phosphatidylserine was studied using monolayers at constant surface area or constant surface pressure. The protein inserted readily into dioleoylphosphatidylserine monolayers up to a limiting pressure of 50 mN/m, whereas the interaction decreased with increasing molecular packing of the phosphatidylserine species, indicating the importance of the hydrophobic core of the lipid layer for the interaction. (2) The high affinity of apocytochrome c for dioleoylphosphatidylserine is indicated by the low Kd of 0.017 microM. There is little or no interaction with phosphatidylcholines. The importance of charge interactions is underlined by its ionic strength and pH dependency. (3) Experiments using 14C-labelled apocytochrome c indicate that cholesterol can enhance the protein binding. (4) It was demonstrated that apocytochrome c monomers penetrate the monolayer whereas oligomers can be formed in an adsorbed layer and washed off without changing the surface pressure. Preincubation of apocytochrome c in 3 M guanidine, to obtain the monomeric form, was essential to measure the full effect of interfacial interaction. (5) The molecular area of apocytochrome c changed from 1200-1300 A2/molecule in the absence of lipid to 700-900 A2/molecule after penetration of dioleoylphosphatidylserine monolayers. (6) Apocytochrome c-dioleoylphosphatidylserine interactions are only possible when the monolayer is approached from the subphase. It is concluded that the charge interactions are required for binding and penetration of the protein.     

Incorporation of a synthetic mitochondrial signal peptide into charged and uncharged phospholipid monolayers

The interaction of the chemically synthesized 25-residue signal peptide of subunit IV of yeast cytochrome c oxidase with synthetic and natural phospholipids was studied by using a monolayer technique. Incorporation of the peptide into phospholipid monolayers was measured as surface area increase at constant surface pressure. The peptide was readily soluble in aqueous buffer, yet spontaneously inserted from an aqueous subphase into phospholipid monolayers up to limiting pressures of 30-40 mN/m. The incorporation of the positively charged peptide was strongly enhanced by the presence of negatively charged phospholipids. The molecular area of the signal peptide in monolayers was determined with a 14C-labeled signal peptide and was 560 +/- 170 A2. This is consistent with a 25-residue alpha-helical peptide incorporating with its long axis parallel to the plane of the monolayer. Incorporation isotherms into synthetic phosphatidylcholine and phosphatidylglycerol monolayers at different charge densities were analyzed in terms of a simple incorporation/binding model, involving partitioning of the peptide into the monolayer and an in-plane binding reaction of the negatively charged phospholipids to the partitioned peptide.     

Surface behaviour and peptide-lipid interactions of the antibiotic peptides, Maculatin and Citropin

Surface behaviour of Maculatin 1.1 and Citropin 1.1 antibiotic peptides have been studied using the Langmuir monolayer technique in order to understand the peptide-membrane interaction proposed as critical for cellular lysis. Both peptides have a spontaneous adsorption at the air-water interface, reaching surface potentials similar to those obtained by direct spreading. Collapse pressures (Pi(c), stability to lateral compression), molecular areas at maximal packing and surface potentials (DeltaV) obtained from compression isotherms of both pure peptide monolayers are characteristic of peptides adopting mainly alpha-helical structure at the interface. The stability of Maculatin monolayers depended on the subphase and increased when pH was raised. In an alkaline environment, Maculatin exhibits a molecular reorganization showing a reproducible discontinuity in the Pi-A compression isotherm. Both peptides in lipid films with the zwitterionic palmitoyl-oleoyl-phosphatidylcholine (POPC) showed an immiscible behaviour at all lipid-peptide proportions studied. By contrast, in films with the anionic palmitoyl-oleoyl-phosphatidylglycerol (POPG), the peptides showed miscible behaviour when the peptides represented less than 50% of total surface area. Additional penetration experiments also demonstrated that both peptides better interact with POPG compared with POPC monolayers. This lipid preference is discussed as a possible explanation of their antibiotic properties.     

Cholesterol oxidase susceptibility of cholesterol and 5-androsten-3 beta-ol in pure sterol monolayers and in mixed monolayers containing 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine.

This study has examined the importance of the isocaproic side chain at C-17 of cholesterol to sterol/phospholipid interactions in monolayer membranes and to the cholesterol oxidase-susceptibility of cholesterol in pure and mixed monolayers at the air/water interface. The interactions between cholesterol or 5-androsten-3 beta-ol (which lacks the C-17 side chain) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) in monolayers indicated that 5-androsten-3 beta-ol was not very efficient in causing condensation of the monolayer packing of POPC. Whereas cholesterol condensed the packing of POPC at all molar fractions examined (i.e., 0.25, 0.50 and 0.75 with regard to POPC), 5-androsten-3 beta-ol caused a slight condensing effect on POPC packing only in the equimolar mixture. The mean molecular area requirement of 5-androsten-3 beta-ol (in pure sterol monolayers at different lateral surface pressures) was 2.2-6.7% less than that observed for cholesterol. The pure 5-androsten-3 beta-ol monolayer also collapsed at lower lateral surface pressures compared with the pure cholesterol monolayer (34 mN/m and 45 mN/m, respectively). The cholesterol oxidase (Streptomyces sp.) catalyzed oxidation of cholesterol or 5-androsten-3 beta-ol in pure monolayers in the air/water interface (10 mN/m) proceeded with very similar rates, indicating that the enzyme did not recognize that the C-17 side chain of 5-androsten-3 beta-ol was missing. The oxidation of cholesterol or 5-androsten-3 beta-ol in mixed POPC-containing monolayers (equimolar mixture) also revealed similar reaction rates, although the reaction was slower in the mixed monolayer compared with the pure sterol monolayer. When the oxidation of cholesterol and 5-androsten-3 beta-ol was examined by monitoring the production of H2O2 (the sterol was solubilized in 2-propanol and the assay conducted in phosphate buffer), the maximal reaction rate observed with 5-androsten-3 beta-ol was only about 41% of that measured with cholesterol. From the cholesterol oxidase point-of-view, it can be concluded that the enzyme did not recognize the C-17 side chain of cholesterol (or lack of it in 5-androsten-3 beta-ol), when the sterol was properly oriented as a monolayer at the air/water interface. However, when the substrate was presented to the enzyme in a less controlled orientation (organic solvent in water), 5-androsten-3 beta-ol may have oriented itself unfavorably compared with the orientation of cholesterol, thereby leading to slower oxidation rates.