Safranin O Staining Using a Microwave Oven

We investigated the effects of microwave irradiation on a safranin O staining method for paraffin sections of formalin fixed rabbit larynx. The control sections were stained according to the conventional method, and the experimental sections were stained in microwave oven for 10 sec at 360 W in Weigert's iron hematoxylin, and for 30 sec at 360 W in fast green and 0.1% safranin O staining solutions. Light microscopic examination of the sections revealed that the microwave heating did not adversely affect the staining properties of cartilage tissue compared to the conventional staining method. Small differences such as darker staining of the matrix and shrinkage of the cytoplasm was observed in some microwave treated sections. The present study revealed that microwave application can be used safely for the safranin O method with the advantage of reduced staining time.     

A simple and rapid microwave-assisted hematoxylin and eosin staining method using 1,1,1 trichloroethane as a dewaxing and a clearing agent

The use and practicability of microwave-assisted staining procedures in routine histopathology has been well established for more than 17 years. In the study reported here, we aimed to examine an alternative approach that would shorten the duration of dewaxing and clearing steps of hematoxylin and eosin (H & E) staining of paraffin sections by using a microwave oven. Although xylene is one of the most popular dewaxing and clearing agents, its flammability restricts its use in a microwave oven; thus we preferred 1,1,1 trichloroethane, which is not flammable, as the dewaxing and clearing agent in the present study. In Group I and Group II (control groups), intestine was processed with xylene and 1,1,1 trichloroethane, respectively. The sections were then stained with H & E according to the conventional staining protocol at room temperature and subdivided into two groups according to the duration of dewaxing and clearing in xylene. In Groups III and IV (experimental groups) similar tissues were processed with xylene and 1,1,1 trichloroethane, respectively; however, sections from these groups were divided into four subgroups to study the period required for dewaxing and clearing in 1,1,1 trichloroethane, then stained with H & E in the microwave oven at 360 W for 30 sec. Our conventional H & E staining procedure, which includes dewaxing, staining and clearing of sections, requires approximately 90 min, while our method using 1,1,1 trichloroethane and microwave heating required only 2 min. Our alternative method for H & E staining not only reduced the procedure time significantly, but also yielded staining quality equal or superior to those stained the conventional way. Our results suggest that 1,1,1 trichloroethane can be used effectively and safely as a dewaxing and clearing agent for H & E staining in a microwave oven.     

A simple and rapid microwave-assisted hematoxylin and eosin staining method using 1,1,1 trichloroethane as a dewaxing and a clearing agent.

The use and practicability of microwave-assisted staining procedures in routine histopathology has been well established for more than 17 years. In the study reported here, we aimed to examine an alternative approach that would shorten the duration of dewaxing and clearing steps of hematoxylin and eosin (H & E) staining of paraffin sections by using a microwave oven. Although xylene is one of the most popular dewaxing and clearing agents, its flammability restricts its use in a microwave oven; thus we preferred 1,1,1 trichloroethane, which is not flammable, as the dewaxing and clearing agent in the present study. In Group I and Group II (control groups), intestine was processed with xylene and 1,1,1 trichloroethane, respectively. The sections were then stained with H & E according to the conventional staining protocol at room temperature and subdivided into two groups according to the duration of dewaxing and clearing in xylene. In Groups III and IV (experimental groups) similar tissues were processed with xylene and 1,1,1 trichloroethane, respectively; however, sections from these groups were divided into four subgroups to study the period required for dewaxing and clearing in 1,1,1 trichloroethane, then stained with H & E in the microwave oven at 360 W for 30 sec. Our conventional H & E staining procedure, which includes dewaxing, staining and clearing of sections, requires approximately 90 min, while our method using 1,1,1 trichloroethane and microwave heating required only 2 min. Our alternative method for H & E staining not only reduced the procedure time significantly, but also yielded staining quality equal or superior to those stained the conventional way. Our results suggest that 1,1,1 trichloroethane can be used effectively and safely as a dewaxing and clearing agent for H & E staining in a microwave oven.     

A simple and rapid microwave-assisted hematoxylin and eosin staining method using 1,1,1 trichloroethane as a dewaxing and a clearing agent

The use and practicability of microwave-assisted staining procedures in routine histopathology has been well established for more than 17 years. In the study reported here, we aimed to examine an alternative approach that would shorten the duration of dewaxing and clearing steps of hematoxylin and eosin (H & E) staining of paraffin sections by using a microwave oven. Although xylene is one of the most popular dewaxing and clearing agents, its flammability restricts its use in a microwave oven; thus we preferred 1,1,1 trichloroethane, which is not flammable, as the dewaxing and clearing agent in the present study. In Group I and Group II (control groups), intestine was processed with xylene and 1,1,1 trichloroethane, respectively. The sections were then stained with H & E according to the conventional staining protocol at room temperature and subdivided into two groups according to the duration of dewaxing and clearing in xylene. In Groups III and IV (experimental groups) similar tissues were processed with xylene and 1,1,1 trichloroethane, respectively; however, sections from these groups were divided into four subgroups to study the period required for dewaxing and clearing in 1,1,1 trichloroethane, then stained with H & E in the microwave oven at 360 W for 30 sec. Our conventional H & E staining procedure, which includes dewaxing, staining and clearing of sections, requires approximately 90 min, while our method using 1,1,1 trichloroethane and microwave heating required only 2 min. Our alternative method for H & E staining not only reduced the procedure time significantly, but also yielded staining quality equal or superior to those stained the conventional way. Our results suggest that 1,1,1 trichloroethane can be used effectively and safely as a dewaxing and clearing agent for H & E staining in a microwave oven.     

Rapid Bielschowsky silver impregnation method using microwave heating

The Bielschowsky silver impregnation method has been used extensively to demonstrate neuronal processes including dendrites, axons and neurofibrils. In this study, we examined the differences in the time required for and the staining quality of the Bielschowsky method for neuronal processes when microwave heating was used instead of processing at room temperature. For this purpose, a control group of sections stained according to the conventional method at room temperature was compared to an experimental group stained in a microwave oven at 180 W for 2, 4 and 1 min in 2% silver nitrate, ammoniacal silver nitrate and gold chloride, respectively. Light microscopic examination demonstrated that the normal structure was preserved in both groups and that there was no difference in the staining quality between the control and the microwave groups. In addition, staining time for this procedure was reduced to 8 min by using the microwave oven. Our study revealed that microwave irradiation can be used safely for Bielschowsky silver impregnation of neuronal tissues.     

Rapid Bielschowsky silver impregnation method using microwave heating

The Bielschowsky silver impregnation method has been used extensively to demonstrate neuronal processes including dendrites, axons and neurofibrils. In this study, we examined the differences in the time required for and the staining quality of the Bielschowsky method for neuronal processes when microwave heating was used instead of processing at room temperature. For this purpose, a control group of sections stained according to the conventional method at room temperature was compared to an experimental group stained in a microwave oven at 180 W for 2, 4 and 1 min in 2% silver nitrate, ammoniacal silver nitrate and gold chloride, respectively. Light microscopic examination demonstrated that the normal structure was preserved in both groups and that there was no difference in the staining quality between the control and the microwave groups. In addition, staining time for this procedure was reduced to 8 min by using the microwave oven. Our study revealed that microwave irradiation can be used safely for Bielschowsky silver impregnation of neuronal tissues.     

Rapid Bielschowsky silver impregnation method using microwave heating.

The Bielschowsky silver impregnation method has been used extensively to demonstrate neuronal processes including dendrites, axons and neurofibrils. In this study, we examined the differences in the time required for and the staining quality of the Bielschowsky method for neuronal processes when microwave heating was used instead of processing at room temperature. For this purpose, a control group of sections stained according to the conventional method at room temperature was compared to an experimental group stained in a microwave oven at 180 W for 2, 4 and 1 min in 2% silver nitrate, ammoniacal silver nitrate and gold chloride, respectively. Light microscopic examination demonstrated that the normal structure was preserved in both groups and that there was no difference in the staining quality between the control and the microwave groups. In addition, staining time for this procedure was reduced to 8 min by using the microwave oven. Our study revealed that microwave irradiation can be used safely for Bielschowsky silver impregnation of neuronal tissues.     

Thionin Staining of Paraffin and Plastic Embedded Sections of Cartilage

The usefulness of thionin for staining cartilage sections embedded in glycol meth-acrylate (GMA) and the effect of decalcification on cartilage sections embedded in paraffin and GMA were assessed. Short decalcification periods using 5% formic acid or 10% EDTA did not influence the staining properties or the morphology of cartilage matrix and chondrocytes. The standard stain safranin O-fast green for differential staining of cartilage was used as control in these experiments. Prolonged exposure of safranin P stained sections to fast green resulted in disappearance of the safranin O stained matrix, thereby hampering the quantitative measurement of negatively charged glycosaminoglycans (GAG). Thionin stained evenly throughout all cartilage layers, independent of the staining times. In contrast to safranin 0, thionin did not show meta-chromasia in nondehydrated cartilage sections, which made it more suitable for assessing cartilage quality in GMA embedded cartilage. To evaluate the selectivity of thionin staining in cartilage, chondroitinase ABC and trypsin digestions were carried out. Thionin staining was prevented by these enzymes in the territorial matrix, representing the interlacunar network and the chondrocyte capsule. Staining with thionin of the interterritorial matrix was only slightly reduced, possibly representing keratan sulfate and hyaluronic acid in cartilage of elderly patients. Comparison of thionin stained GMA embedded cartilage with safranin O stained paraffin embedded sections showed significant similarity in optical densitometry, indicative of the specificity of thionin bound to negatively charged GAG in cartilage. In GMA embedded cartilage morphology was relatively intact compared to paraffin embedded sections due to less shrinkage of chondrocytes and the interlacunar network.     

Thionin Staining of Paraffin and Plastic Embedded Sections of Cartilage

The usefulness of thionin for staining cartilage sections embedded in glycol meth-acrylate (GMA) and the effect of decalcification on cartilage sections embedded in paraffin and GMA were assessed. Short decalcification periods using 5% formic acid or 10% EDTA did not influence the staining properties or the morphology of cartilage matrix and chondrocytes. The standard stain safranin O-fast green for differential staining of cartilage was used as control in these experiments. Prolonged exposure of safranin P stained sections to fast green resulted in disappearance of the safranin O stained matrix, thereby hampering the quantitative measurement of negatively charged glycosaminoglycans (GAG). Thionin stained evenly throughout all cartilage layers, independent of the staining times. In contrast to safranin 0, thionin did not show meta-chromasia in nondehydrated cartilage sections, which made it more suitable for assessing cartilage quality in GMA embedded cartilage. To evaluate the selectivity of thionin staining in cartilage, chondroitinase ABC and trypsin digestions were carried out. Thionin staining was prevented by these enzymes in the territorial matrix, representing the interlacunar network and the chondrocyte capsule. Staining with thionin of the interterritorial matrix was only slightly reduced, possibly representing keratan sulfate and hyaluronic acid in cartilage of elderly patients. Comparison of thionin stained GMA embedded cartilage with safranin O stained paraffin embedded sections showed significant similarity in optical densitometry, indicative of the specificity of thionin bound to negatively charged GAG in cartilage. In GMA embedded cartilage morphology was relatively intact compared to paraffin embedded sections due to less shrinkage of chondrocytes and the interlacunar network.     

适于研究形成层活动的不脱蜡苏木精—番红染色法

描述了一种适用于研究形成层浩大活动的石蜡切片法,材料用加甘油的ＦＡＡ固定液固定,用代氏或哈氏苏木精番红对不胶蜡的切片同时染色、同样条件下分色,脱蜡后直接封片。此法快速有效,所制切片的重量不亚于、甚至更铖于常规染色法,制片可以长期保存而不退色．     

Combined histochemistry and autofluorescence for identifying lignin distribution in cell walls

Histological staining methods commonly used for detecting cellulose and lignin in cell walls were combined with epifluorescence microscopy to visualize differences in lignification between and within cellular elements. We tested our approach on sections of one-year-old branches of Fraxinus ornus L., Myrtus communis L., Olea europaea L., Pistacia lentiscus L. and Rhamnus alaternus L., containing both normal and tension wood. Sections were subjected to various staining techniques, viz. safranin O, safranin O/fast green FCF, and alcoholic solutions of safranin O/astra blue, according to the commonly accepted protocols. Stained and unstained sections were compared using both light and epifluorescence microscopy. Safranin O with or without counterstaining hid the strong fluorescence of vessel walls, cell corners and middle lamellae allowing the secondary wall fibers to fluoresce more clearly. Epifluorescence microscopy applied to stained sections showed more cell wall details than autofluorescence of unstained sections or white light microscopy of counterstained sections. This simple approach proved reliable and valuable for detecting differences in lignification in thick sections without the need for costly equipment.     

Combined histochemistry and autofluorescence for identifying lignin distribution in cell walls

Histological staining methods commonly used for detecting cellulose and lignin in cell walls were combined with epifluorescence microscopy to visualize differences in lignification between and within cellular elements. We tested our approach on sections of one-year-old branches of Fraxinus ornus L., Myrtus communis L., Olea europaea L., Pistacia lentiscus L. and Rhamnus alaternus L., containing both normal and tension wood. Sections were subjected to various staining techniques, viz. safranin O, safranin O/fast green FCF, and alcoholic solutions of safranin O/astra blue, according to the commonly accepted protocols. Stained and unstained sections were compared using both light and epifluorescence microscopy. Safranin O with or without counterstaining hid the strong fluorescence of vessel walls, cell corners and middle lamellae allowing the secondary wall fibers to fluoresce more clearly. Epifluorescence microscopy applied to stained sections showed more cell wall details than autofluorescence of unstained sections or white light microscopy of counterstained sections. This simple approach proved reliable and valuable for detecting differences in lignification in thick sections without the need for costly equipment.     

Improved Staining Procedures for Semithin Epoxy Sections of Plant Tissues

Improved and reliable methods are described for staining semithin sections of plant materials fixed in glutaraldehyde-osmium and embedded in epoxy resins. One-micron sections are fixed to slides, stained with a two-solution hematoxylin procedure or with a methylene blue-azure A combination, counterstained in aqueous safranin O, cleared, and mounted permanently. Basophilic tissue components arc stained gray to black by the hematoxylin and blue or purple by the methylene blue-azure A combination; all wall structures are colored by the safranin. With the procedures recommended, stains am sharp and intense, sections arc flat, wrinkling and loss are held to a minimum, and unsightly precipitates do not form.     

Improved staining procedures for semithin epoxy sections of plant tissues.

Improved and reliable methods are described for staining semithin sections of plant materials fixed in glutaraldehyde-osmium and embedded in epoxy resins. One-micron sections are fixed to slides, stained with a two-solution hematoxylin procedure or with a methylene blue-azure A combination, counterstained in aqueous safranin O, cleared, and mounted permanently. Basophilic tissue components are stained gray to black by the hematoxylin and blue or purple by the methylene blue-azure A combination; cell wall structures are colored by the safranin. With the procedures recommended, stains are sharp and intense, sections are flat, wrinkling and loss are held to a minimum, and unsightly precipitates do not form.     

Nuclear Staining of Colletotrichum Gloeosporioides F. SP. Malvae Conidia with Fluorescent and Nonfluorescent Stains

Six different staining techniques were evaluated for their suitability to stain nuclei of Colletotrichum gloeosporioides f. sp. malvae (C.g.m.) spores. Of the three fluorescent stains, DAPI (4',6-diamidino-2-phenylindole) and bisbenzimide (Hoechst 33258) stained spore nuclei well; mithramycin did not. To achieve consistent results with the bisbenzimide staining protocol, the spores had to be fixed prior to staining and the stain had to be supplemented with Triton X-100. Both safranin O and Giemsa were suitable nonfluorescent staining techniques; lomofungin was not. Safranin O staining was simple and rapid. However, reproducibility was better if the spore suspension and KOH droplets were rapidly mixed prior to adding the stain. There was no significant difference in the percentages of uninucleate and binucleate spores observed in spore preparations stained with DAPI, bisbenzimide, safranin O or Giemsa. Bisbenzimide and safranin O were found to be simple, rapid and reliable fluorescent and nonfluorescent techniques, respectively, for staining nuclei of C.g.m. spores.     

A Rapid Safranin-Metal Phthalocyanine Double Staining Technique for Plants

Pure metal 4.4',4',4'-tetxa-substituted, sulfo-, carboxy- and nitrophthalocyanines were synthesized. Mounted, deparaffinized and partially dehydrated sections of plant tissues were stained with 0.5% safranin in 50% alcohol for 5-10 min. Excess safranin was removed with a series of 70%, 95% and absolute alcohol washes. The sections were then stained for 2-3 min using metal 4,4',4',4'-phthalocyanine tetracarboxylic acid (MPTC, 0.5% (V/V) containing a few drops of dilute sodium hydroxide), metal 4,4',4',4'-tetra-sulfophthalocyanine (MPTS, 0.5% (V/V)) or metal tetranitrophthalocyanine (MPTN, 0.5% (V/V) in dimethyl sulfoxide). The sections were washed with 95%, then absolute alcohol; however, the metal tetranitrophthalocyanine section was washed only with absolute alcohol. Stained sections were treated briefly with xylene, then mounted on a coverslip. Bright peacock blue (MPTC and MPTS using Cu, Co or Ni), turquoise blue (MPTN using Cu or Ni) or parrot green (zinc phthalocyanine tetracarboxylic acid-ZnPTC, zinc phthalocyanine tetranitro derivative-ZnPTN) colors were obtained. Lignin-containing cells were stained red by safranin and the remaining cell structures were stained by the metal phthalocyanine complex with color brightness superior to that of fast green. Uniform staining, no color fading after a year, reliability, brief staining times, high color contrast (log ε = 4.0-4.9) and ease of use make this double staining combination ideal for routine use and photomicrography.     

Mucopolysaccharide histochemistry of rat tooth germs

Summary The histochemical distribution and localization of acid mucopolysaccharides and glycoproteins have been studied in rat tooth germs and lower joints. After fixation, sections were stained with PAS, alcian blue-PAS, colloidal iron, colloidal iron-PAS, colloidal iron-Feulgen, azure A and safranin O. Prior to staining, sections were incubated in hyaluronidase, pepsin and papain. A 2 hour incubation in pepsin greatly enhanced AB or CI basophilia in the stellate reticulum and the enamel-dentinal junction. These findings demonstrated that some acidic radicals of the polysaccharides are partially blocked by basic proteins. Hyaluronidase did not completely destroy the alcian blue or colloidal iron positive material whereas azure A metachromasia was completely removed. These results indicated that AB and/or CI stained substrates different from those revealed by azure A.With 10 Figures in colourThis work was supported by Grant No. D-1325 of the National Institutes of Health, Bethesda, Maryland.On leave of absence at the University of Rome Medical School, Viale Regina Elena 287-A, Rome, Italy.     

Understanding microwave-stimulated Romanowsky-Giemsa staining of plastic embedded bone marrow

Summary Bone marrow smears were made and fixed in methanol or formaldehyde. Marrow sections of various thicknesses were also prepared from formaldehyde fixed marrows embedded in paraffin or plastic (glycol methacrylate). The different smears and sections were then stained by a Romanowsky-Giemsa procedure. Some specimens were stained using a standard microwave-stimulated method previously used diagnostically. The effects of technical variations were studied, including degree of microwave irradiation and the staining time. Comparisons of the resulting staining outcomes showed that microwave stimulated Romanowsky-Giemsa staining of plastic sections is a rate controlled process. Unusual aspects of the staining pattern of plastic sections (namely the purple basophilic cytoplasms and nucleoli, and blue chromatin) are due to microwave stimulation and formaldehyde fixation respectively.     

Studies in gram staining.

Gram-negative bacteria stained with crystal violet are decolorized by 95% alcohol within 2 min, whereas Gram-positive bacteria require at least 3 min treatment. Aqueous solutions of safranin, neutral red, and fuschsin replace crystal violet from stained Gram-positive bacteria more quickly than alcohol alone, and alcoholic solutions of these counterstains are in most cases still more effective. Treatment of crystal violet-stained organisms with alcoholic safranin (0.25%) for 15 sec will distinguish Gram-positive bacteria (violet) from Gram-negative bacteria (pink). Alcohol containing very low concentrations of iodine generally decolorizes crystal violet-stained Gram-positive bacteria more quickly than alcohol alone. Increasing concentrations of iodine in alcohol reduce the rate of decolorization of stained bacteria, but stained Gram-negative bacteria are still readily decolorized. The addition of 0.1% iodine to alcohol increases the rate of extraction of crystal violet by alcohol from Gram-negative organisms, but delays extraction of dye from Gram-positive organisms, and this applies when counterstain is also present. A two-solution modification of Gram staining is described in which crystal violet-stained bacteria are treated with an alcoholic solution of safranin, fuchsin, and iodine.     

Some Staining Technics for Guayule Studies

For staining tissues and secretions in guayule studies the following dyes and dye combinations have been found satisfactory: rubber in plant sections, Sudan IV; plant sections (rubber and tissues) and ground tissues, Poirrier's blue, Sudan IV and titan yellow; rubber extraction films (with tissue contamination), oil blue NA, safranin O and titan yellow; resin extraction films, Bismark brown and oil blue NA; chopped plants (milling studies), safranin O and Sudan IV. For microscopic studies, sections and ground tissues are pretreated with KOH and a bleaching agent prior to staining.