Roles of the sortases of Streptococcus pneumoniae in assembly of the RlrA pilus

Pili have been observed on the surface of several gram-positive bacteria, including Streptococcus pneumoniae. The S. pneumoniae strain TIGR4 pilus is composed of three structural subunit proteins encoded in the rlrA pathogenicity islet, RrgA, RrgB, and RrgC. RrgB comprises the pilus backbone, RrgA is observed at intervals along surface pili, while RrgC is found in a loosely defined relationship with RrgA. We investigated the incorporation of each subunit into pili and the reliance of such placement on each of the other subunits. Both accessory subunits RrgA and RrgC are present in similar quantities in pili of all sizes. However, neither protein is required for the polymerization of RrgB, suggesting a nonessential role for RrgA and RrgC in the initiation of pilus assembly. Additionally, the rlrA islet encodes three sortases, SrtC-1, SrtC-2, and SrtC-3 (formerly SrtB, SrtC, and SrtD), which are divergent in sequence from the housekeeping sortase, SrtA. We determined the contributions of these four sortases to pilus assembly and found that SrtA is dispensable for pilus assembly and localization to the cell wall. Instead, SrtC-1, SrtC-2, and SrtC-3 are responsible for pilus assembly and exhibit functional redundancy with respect to backbone assembly and cell wall localization. A level of specificity and coordination among the class C sortases was revealed by the finding that SrtC-1 and SrtC-3 are required for the incorporation of the accessory subunits and by showing a deleterious effect on pilus assembly upon alteration of the cell wall sorting signals of the accessory subunit proteins.     

Sortase A substrate specificity in GBS pilus 2a cell wall anchoring

Streptococcus agalactiae, also referred to as Group B Streptococcus (GBS), is one of the most common causes of life-threatening bacterial infections in infants. In recent years cell surface pili have been identified in several Gram-positive bacteria, including GBS, as important virulence factors and promising vaccine candidates. In GBS, three structurally distinct types of pili have been discovered (pilus 1, 2a and 2b), whose structural subunits are assembled in high-molecular weight polymers by specific class C sortases. In addition, the highly conserved housekeeping sortase A (SrtA), whose main role is to link surface proteins to bacterial cell wall peptidoglycan by a transpeptidation reaction, is also involved in pili cell wall anchoring in many bacteria. Through in vivo mutagenesis, we demonstrate that the LPXTG sorting signal of the minor ancillary protein (AP2) is essential for pilus 2a anchoring. We successfully produced a highly purified recombinant SrtA (SrtA(ΔN40)) able to specifically hydrolyze the sorting signal of pilus 2a minor ancillary protein (AP2-2a) and catalyze in vitro the transpeptidation reaction between peptidoglycan analogues and the LPXTG motif, using both synthetic fluorescent peptides and recombinant proteins. By contrast, SrtA(ΔN40) does not catalyze the transpeptidation reaction with substrate-peptides mimicking sorting signals of the other pilus 2a subunits (the backbone protein and the major ancillary protein). Thus, our results add further insight into the proposed model of GBS pilus 2a assembly, in which SrtA is required for pili cell wall covalent attachment, acting exclusively on the minor accessory pilin, representing the terminal subunit located at the base of the pilus.     

Housekeeping sortase facilitates the cell wall anchoring of pilus polymers in Corynebacterium diphtheriae

Many surface proteins in Gram-positive bacteria are covalently linked to the cell wall through a transpeptidation reaction catalysed by the enzyme sortase. Corynebacterium diphtheriae encodes six sortases, five of which are devoted to the assembly of three distinct types of pilus fibres--SrtA for the SpaA-type pilus, SrtB/SrtC for the SpaD-type pilus, and SrtD/SrtE for the SpaH-type pilus. We demonstrate here the function of SrtF, the so-called housekeeping sortase, in the cell wall anchoring of pili. We show that a multiple deletion mutant strain expressing only SrtA secretes a large portion of SpaA polymers into the culture medium, with concomitant decrease in the cell wall-linked pili. The same phenotype is observed with the mutant that is missing SrtF alone. By contrast, a strain that expresses only SrtF displays surface-linked pilins but no polymers. Therefore, SrtF can catalyse the cell wall anchoring of pilin monomers as well as pili, but it does not polymerize pilins. We show that SrtA and SrtF together generate wild-type levels of the SpaA-type pilus on the bacterial surface. Furthermore, by regulating the expression of SpaA in the cell, we demonstrate that the SrtF function becomes critical when the SpaA level is sufficiently high. Together, these findings provide key evidence for a two-stage model of pilus assembly: pilins are first polymerized by a pilus-specific sortase, and the resulting fibre is then attached to the cell wall by either the cognate sortase or the housekeeping sortase.     

Structural differences between the Streptococcus agalactiae housekeeping and pilus-specific sortases: SrtA and SrtC1

The assembly of pili on the cell wall of Gram-positive bacteria requires transpeptidase enzymes called sortases. In Streptococcus agalactiae, the PI-1 pilus island of strain 2603V/R encodes two pilus-specific sortases (SrtC1 and SrtC2) and three pilins (GBS80, GBS52 and GBS104). Although either pilus-specific sortase is sufficient for the polymerization of the major pilin, GBS80, incorporation of the minor pilins GBS52 and GBS104 into the pilus structure requires SrtC1 and SrtC2, respectively. The S. agalactiae housekeeping sortase, SrtA, whose gene is present at a different location and does not catalyze pilus polymerization, was shown to be involved in cell wall anchoring of pilus polymers. To understand the structural basis of sortases involved in such diverse functions, we determined the crystal structures of S. agalactiae SrtC1 and SrtA. Both enzymes are made of an eight-stranded beta-barrel core with variations in their active site architecture. SrtA exhibits a catalytic triad arrangement similar to that in Streptococcus pyogenes SrtA but different from that in Staphylococcus aureus SrtA. In contrast, the SrtC1 enzyme contains an N-terminal helical domain and a 'lid' in its putative active site, which is similar to that seen in Streptococcus pneumoniae pilus-specific sortases, although with subtle differences in positioning and composition. To understand the effect of such differences on substrate recognition, we have also determined the crystal structure of a SrtC1 mutant, in which the conserved DP(W/F/Y) motif was replaced with the sorting signal motif of GBS80, IPNTG. By comparing the structures of WT wild type SrtA and SrtC1 and the 'lid' mutant of SrtC1, we propose that structural elements within the active site and the lid may be important for defining the role of specific sortase in pili biogenesis.     

Assembly of distinct pilus structures on the surface of Corynebacterium diphtheriae

Different surface organelles contribute to specific interactions of a pathogen with host tissues or infectious partners. Multiple pilus gene clusters potentially encoding different surface structures have been identified in several gram-positive bacterial genomes sequenced to date, including actinomycetales, clostridia, corynebacteria, and streptococci. Corynebacterium diphtheriae has been shown to assemble a pilus structure, with sortase SrtA essential for the assembly of a major subunit SpaA and two minor proteins, SpaB and SpaC. We report here the characterization of a second pilus consisting of SpaD, SpaE, and SpaF, of which SpaD and SpaE form the pilus shaft and SpaF may be located at the pilus tip. The structure of the SpaDEF pilus contains no SpaABC pilins as detected by immunoelectron microscopy. Neither deletion of spaA nor sortase srtA abolishes SpaDEF pilus formation. The assembly of the SpaDEF pilus requires specific sortases located within the SpaDEF pilus gene cluster. Although either sortase SrtB or SrtC is sufficient to polymerize SpaDF, the incorporation of SpaE into the SpaD pili requires sortase SrtB. In addition, an alanine in place of the lysine of the SpaD pilin motif abrogates pilus polymerization. Thus, SpaD, SpaE, and SpaF constitute a different pilus structure that is independently assembled and morphologically distinct from the SpaABC pili and possibly other pili of C. diphtheriae.     

Cell surface display of minor pilin adhesins in the form of a simple heterodimeric assembly in Corynebacterium diphtheriae

Pilus assembly in Gram-positive bacteria occurs by a two-step mechanism, whereby pilins are polymerized and then covalently anchored to the cell wall. In Corynebacterium diphtheriae, the pilin-specific sortase SrtA catalyses polymerization of the SpaA-type pilus, consisting of the shaft pilin SpaA, tip pilin SpaC and minor pilin SpaB. Cell wall anchoring of the SpaA polymers is triggered when SrtA incorporates SpaB into the pilus base via lysine-mediated transpeptidation; anchoring to the cell wall peptidoglycan is subsequently catalysed by the housekeeping sortase SrtF. Here we show that SpaB and SpaC formed a heterodimer independent of SpaA polymerization. SrtA was absolutely required for the formation of the SpaBC heterodimer, while SrtF facilitated the optimal cell wall anchoring of this heterodimer. Alanine substitution of the SpaB lysine residue K139 or truncation of the SpaB cell wall-sorting signal (CWSS) abolished assembly of the SpaBC heterodimer, hence underscoring SpaB function in transpeptidation and cell wall linkage. Importantly, sortase specificity for the cell wall-anchoring step was found to be dependent on the LAFTG motif within the SpaB CWSS. Thus, C. diphtheriae employs a common sortase-catalysed mechanism involving lysine-mediated transpeptidation to generate both adhesive pilus and simple heterodimeric structures on the bacterial the cell wall.     

Identification of substrates of the Listeria monocytogenes sortases A and B by a non-gel proteomic analysis

Sortases are enzymes that anchor surface proteins to the cell wall of Gram-positive bacteria by cleaving a sorting motif located in the C-terminus of the protein substrate. The best-characterized motif is LPXTG, which is cleaved between the T and G residues. In this study, a non-gel proteomic approach was used to identify surface proteins recognized by the two sortases of Listeria monocytogenes, SrtA and SrtB. Material containing peptidoglycan and strongly associated proteins was purified from sortase-defective mutants, digested with trypsin, and the resulting peptide mixture analysed by two-dimensional nano-liquid chromatography coupled to ion-trap mass spectrometry. Unlike enzymes involved in peptidoglycan metabolism, other surface proteins displayed uneven distribution in the mutants. A total of 13 LPXTG-containing proteins were identified exclusively in strains having a functional SrtA. In contrast, two surface proteins, Lmo2185 and Lmo2186, were identified only when SrtB was active. The analysis of the peptides identified in these proteins suggests that SrtB of L. monocytogenes may recognize two different sorting motifs, NXZTN and NPKXZ. Taken together, these data demonstrate that non-gel proteomics is a powerful technique to rapidly identify sortase substrates and to gain insights on potential sorting motifs.     

Sortases and pilin elements involved in pilus assembly of Corynebacterium diphtheriae

Corynebacterium diphtheriae SpaA pili are composed of three pilin subunits, SpaA, SpaB and SpaC. SpaA, the major pilin protein, is distributed uniformly along the pilus shaft, whereas SpaB is observed at regular intervals, and SpaC seems to be positioned at the pilus tip. Pilus assembly in C. diphtheriae requires the pilin motif and the C-terminal sorting signal of SpaA, and is proposed to occur by a mechanism of ordered cross-linking, whereby pilin-specific sortase enzymes cleave precursor proteins at sorting signals and involve the side-chain amino groups of pilin motif sequences to generate covalent linkages between pilin subunits. We show here that two elements of SpaA pilin precursor, the pilin motif and the sorting signal, are together sufficient to promote the polymerization of an otherwise secreted protein by a process requiring the function of the sortase A gene (srtA). Five other sortase genes are dispensable for SpaA pilus assembly. Further, the incorporation of SpaB into SpaA pili requires a glutamic acid residue within the E box motif of SpaA, a feature that is found to be conserved in other Gram-positive pathogens that encode sortase and pilin subunit genes with sorting signals and pilin motifs. When the main fimbrial subunit of Actinomyces naeslundii type I fimbriae, FimA, is expressed in corynebacteria, C. diphtheriae strain NCTC13129 polymerized FimA to form short fibres. Although C. diphtheriae does not depend on other actinomycetal genes for FimA polymerization, this process involves the pilin motif and the sorting signal of FimA as well as corynebacterial sortase D (SrtD). Thus, pilus assembly in Gram-positive bacteria seems to occur by a universal mechanism of ordered cross-linking of precursor proteins, the multiple conserved features of which are recognized by designated sortase enzymes.     

Assembly of pili on the surface of Corynebacterium diphtheriae

Pili of Gram-negative pathogens are formed from pilin precursor molecules by non-covalent association within the outer membrane envelope. Gram-positive microbes employ the cell wall peptidoglycan as a surface organelle for the covalent attachment of proteins, however, an assembly pathway for pili has not yet been revealed. We show here that pili of Corynebacterium diphtheriae are composed of three pilin subunits, SpaA, SpaB and SpaC. SpaA, the major pilin protein, is distributed uniformly along the pilus shaft, whereas SpaB is observed at regular intervals and SpaC seems positioned at the pilus tip. Assembled pili are released from the bacterial surface by treatment with murein hydrolase, suggesting that the pilus fibres may be anchored to the cell wall envelope. All three pilin subunit proteins are synthesized as precursors carrying N-terminal signal peptides and C-terminal sorting signals. Some, but not all, of the six sortase genes encoded in the genome of C. diphtheriae are required for precursor processing, pilus assembly or cell wall envelope attachment. Pilus assembly is proposed to occur by a mechanism of ordered cross-linking, whereby pilin-specific sortase enzymes cleave precursor proteins at sorting signals and involve the side chain amino groups of pilin motif sequences to generate links between pilin subunits. This covalent tethering of adjacent pilin subunits appears to have evolved in many Gram-positive pathogens that encode sortase and pilin subunit genes with sorting signals and pilin motifs.     

Pilin and Sortase Residues Critical for Endocarditis- and Biofilm-Associated Pilus Biogenesis in Enterococcus faecalis

Enterococci commonly cause hospital-acquired infections, such as infective endocarditis and catheter-associated urinary tract infections. In animal models of these infections, a long hairlike extracellular protein fiber known as the endocarditis- and biofilm-associated (Ebp) pilus is an important virulence factor for Enterococcus faecalis. For Ebp and other sortase-assembled pili, the pilus-associated sortases are essential for fiber formation as they create covalent isopeptide bonds between the sortase recognition motif and the pilin-like motif of the pilus subunits. However, the molecular requirements governing the incorporation of the three pilus subunits (EbpA, EbpB, and EbpC) have not been investigated in E. faecalis. Here, we show that a Lys residue within the pilin-like motif of the EbpC subunit was necessary for EbpC polymerization. However, incorporation of EbpA into the pilus fiber only required its sortase recognition motif (LPXTG), while incorporation of EbpB only required its pilin-like motif. Only the sortase recognition motif would be required for incorporation of the pilus tip subunit, while incorporation of the base subunit would only require the pilin recognition motif. Thus, these data support a model with EbpA at the tip and EbpB at the base of an EbpC polymer. In addition, the housekeeping sortase, SrtA, was found to process EbpB and its predicted catalytic Cys residue was required for efficient cell wall anchoring of mature Ebp pili. Thus, we have defined molecular interactions involved in fiber polymerization, minor subunit organization, and pilus subcellular compartmentalization in the E. faecalis Ebp pilus system. These studies advance our understanding of unique molecular mechanisms of sortase-assembled pilus biogenesis.     

Two Crystal Structures of Pneumococcal Pilus Sortase C Provide Novel Insights into Catalysis and Substrate Specificity

The respiratory tract pathogen Streptococcus pneumoniae is a primary cause of morbidity and mortality worldwide. Pili enhance initial adhesion as well as the capacity of pneumococci to cause pneumonia and bacteremia. Pilus-associated sortases (SrtB, SrtC, and SrtD) are involved in the biogenesis of pneumococcal pili, composed of repeating units of RrgB that create the stalk to which the RrgA adhesin and the preferential pilus tip subunit RrgC are covalently associated. Using single sortase-expressing strains, we demonstrate that both pilin-polymerizing sortases SrtB and SrtC can covalently link pili to the peptidoglycan cell wall, a property shared with the non-pilus-polymerizing enzyme SrtD and the housekeeping sortase SrtA. Comparative analysis of the crystal structures of S. pneumoniae SrtC and SrtB revealed structural differences explaining the incapacity of SrtC, but not of SrtB, to incorporate RrgC into the pilus. Accordingly, site-directed mutagenesis of Thr¹⁶⁰ in SrtB to an arginine as in SrtC (Arg¹⁶⁰) partially converted its substrate specificity into that of SrtC. Solving two crystal structures for SrtC suggests that an opening of a flexible lid and a concomitant cysteine rotation are important for catalysis and the activation of the catalytic cysteine of pilus-associated sortases.     

Involvement of T6 pili in biofilm formation by serotype M6 Streptococcus pyogenes

The group A streptococcus (GAS) Streptococcus pyogenes is known to cause self-limiting purulent infections in humans. The role of GAS pili in host cell adhesion and biofilm formation is likely fundamental in early colonization. Pilus genes are found in the FCT (fibronectin-binding protein, collagen-binding protein, and trypsin-resistant antigen) genomic region, which has been classified into nine subtypes based on the diversity of gene content and nucleotide sequence. Several epidemiological studies have indicated that FCT type 1 strains, including serotype M6, produce large amounts of monospecies biofilm in vitro. We examined the direct involvement of pili in biofilm formation by serotype M6 clinical isolates. In the majority of tested strains, deletion of the tee6 gene encoding pilus shaft protein T6 compromised the ability to form biofilm on an abiotic surface. Deletion of the fctX and srtB genes, which encode pilus ancillary protein and class C pilus-associated sortase, respectively, also decreased biofilm formation by a representative strain. Unexpectedly, these mutant strains showed increased bacterial aggregation compared with that of the wild-type strain. When the entire FCT type 1 pilus region was ectopically expressed in serotype M1 strain SF370, biofilm formation was promoted and autoaggregation was inhibited. These findings indicate that assembled FCT type 1 pili contribute to biofilm formation and also function as attenuators of bacterial aggregation. Taken together, our results show the potential role of FCT type 1 pili in the pathogenesis of GAS infections.     

The minor pilin subunit Sgp2 is necessary for assembly of the pilus encoded by the srtG cluster of Streptococcus suis

Gram-positive pili are composed of covalently bound pilin subunits whose assembly is mediated via a pilus-specific sortase(s). Major subunits constitute the pilus backbone and are therefore essential for pilus formation. Minor subunits are also incorporated into the pilus, but they are considered to be dispensable for backbone formation. The srtG cluster is one of the putative pilus gene clusters identified in the major swine pathogen Streptococcus suis. It consists of one sortase gene (srtG) and two putative pilin subunit genes (sgp1 and sgp2). In this study, by constructing mutants for each of the genes in the cluster and by both immunoblotting and immunogold electron microscopic analysis with antibodies against Sgp1 and Sgp2, we found that the srtG cluster mediates the expression of pilus-like structures in S. suis strain 89/1591. In this pilus, Sgp1 forms the backbone, whereas Sgp2 is incorporated as the minor subunit. In accordance with the current model of pilus assembly by Gram-positive organisms, the major subunit Sgp1 was indispensable for backbone formation and the cognate sortase SrtG mediated the polymerization of both subunits. However, unlike other well-characterized Gram-positive bacterial pili, the minor subunit Sgp2 was required for polymerization of the major subunit Sgp1. Because Sgp2 homologues are encoded in several other Gram-positive bacterial pilus gene clusters, in some types of pili, minor pilin subunits may contribute to backbone formation by a novel mechanism.     

Sortase B, a new class of sortase in Listeria monocytogenes

Sortases are transamidases that covalently link proteins to the peptidoglycan of gram-positive bacteria. The genome of the pathogenic bacterium Listeria monocytogenes encodes two sortases genes, srtA and srtB. The srtA gene product anchors internalin and some other LPXTG-containing proteins to the listerial surface. Here, we focus on the role of the second sortase, SrtB. Whereas SrtA acts on most of the proteins in the peptidoglycan fraction, SrtB appears to target minor amounts of surface polypeptides. We identified one of the SrtB-anchored proteins as the virulence factor SvpA, a surface-exposed protein which does not contain the LPXTG motif. Therefore, as in Staphylococcus aureus, the listerial SrtB represents a second class of sortase in L. monocytogenes, involved in the attachment of a subset of proteins to the cell wall, most likely by recognizing an NXZTN sorting motif. The DeltasrtB mutant strain does not have defects in bacterial entry, growth, or motility in tissue-cultured cells and does not show attenuated virulence in mice. SrtB-mediated anchoring could therefore be required to anchor surface proteins involved in the adaptation of this microorganism to different environmental conditions.     

Acyl Enzyme Intermediates in Sortase-Catalyzed Pilus Morphogenesis in Gram-Positive Bacteria

In gram-positive bacteria, covalently linked pilus polymers are assembled by a specific transpeptidase enzyme called pilus-specific sortase. This sortase is postulated to cleave the LPXTG motif of a pilin precursor between threonine and glycine and to form an acyl enzyme intermediate with the substrate. Pilus polymerization is believed to occur through the resolution of this intermediate upon specific nucleophilic attack by the conserved lysine located within the pilin motif of another pilin monomer, which joins two pilins with an isopeptide bond formed between threonine and lysine. Here, we present evidence for sortase reaction intermediates in Corynebacterium diphtheriae. We show that truncated SrtA mutants that are loosely bound to the cytoplasmic membrane form high-molecular-weight complexes with SpaA polymers secreted into the extracellular milieu. These complexes are not formed with SpaA pilin mutants that have alanine substitutions in place of threonine in the LPXTG motif or lysine in the pilin motif. The same phenotype is observed with alanine substitutions of either the conserved cysteine or histidine residue of SrtA known to be required for catalysis. Remarkably, the assembly of SpaA pili, or the formation of intermediates, is abolished with a SrtA mutant missing the membrane-anchoring domain. We infer that pilus polymerization involves the formation of covalent pilin-sortase intermediates, which occurs within a molecular platform on the exoplasmic face of the cytoplasmic membrane that brings together both sortase and its cognate substrates in close proximity to each other, likely surrounding a secretion apparatus. We present electron microscopic data in support of this picture.Adherence to specific host tissue is a key step in bacterial colonization and the establishment of a successful infection by bacterial pathogens. Bacteria express a variety of adhesive cell surface molecules to bind host cells or other substrates in their natural habitat. The proteinaceous filaments known as pili or fimbriae are a clinically important class of these molecules. Both gram-negative and gram-positive bacteria express pili (6, 8). The gram-positive bacterial pili are unique in three respects (12, 25, 31). First, they represent heterodimeric or heterotrimeric protein polymers in which individual pilin subunits are covalently joined to each other (2, 9, 32). Second, the polymer itself is covalently attached to the cell wall (3, 31). Third, unlike pilus assembly in gram-negative bacteria, many of which require chaperones (26), the polymerization of the gram-positive pili and their cell wall attachment require specific transpeptidase enzymes called sortases (31).Mazmanian and colleagues discovered the sortase SrtA as an enzyme that linked the surface protein A of Staphylococcus aureus to its cell wall (15). Genome sequences revealed that sortases are ubiquitously expressed in gram-positive bacteria, including significant pathogens, such as Actinomyces naeslundii, Bacillus cereus, Corynebacterium diphtheriae, Enterococcus faecalis, Streptococcus agalactiae, and Streptococcus pneumoniae (4, 5, 28). Sortases are classified according to their functions and phylogenic relationships (4, 5). The class that closely matches SrtA of S. aureus in structure and function is now called a housekeeping sortase. Its function is to attach numerous surface proteins to the cell wall (16). Common to each of these cell surface proteins is a cell wall sorting signal with an LPXTG motif that is absolutely necessary for cell wall anchoring (18). Elegant genetic, biochemical, and structural work by the Schneewind laboratory illuminated the universal reaction mechanism of protein sorting in the gram-positive cell wall (14). Cell wall anchoring of surface proteins is catalyzed in two steps. In the first step, SrtA cleaves the TG peptide bond of the LPXTG motif of protein A and forms an acyl enzyme intermediate involving the threonine of protein A and the catalytic cysteine of sortase (22, 27, 29). In the second step, the cleaved protein A is transferred to the cell wall when a nucleophile amine from the lipid II precursor attacks and resolves the acyl enzyme intermediate (20, 21, 30). This seminal work formed the basis of our current model of pilus assembly catalyzed by pilus-specific sortases (12).We have used C. diphtheriae as a model for studies of the mechanism of pilus biogenesis. The corynebacterial genome encodes six different sortases (32). We now know that while five of these sortases (SrtA to -E) are devoted to pilus assembly, even the housekeeping sortase, SrtF, is required for efficient attachment of pili to the cell wall (23). Corynebacteria produce three distinct types of heterotrimeric pili, which are encoded by three pilus islands, each encoding three pilins (namely, SpaABC, SpaDEF, and SpaGHI) plus one or two cognate sortases essential for the assembly of the respective pilus (7, 24, 32). In each case, the prototype pilus represents a shaft structure made of a specific major pilin (namely, SpaA, SpaD, and SpaH) (12). Each type of pilus also contains a minor pilin at the tip (SpaC, SpaF, and SpaG) and another minor pilin dispersed along the shaft, as well as at the base of the pilus (SpaB, SpaE, and SpaI) (12). How are these polymers assembled, and how are they attached to the cell wall? All pilin proteins are predicted to contain in their amino termini a hydrophobic signal sequence necessary for export to the exoplasm by the Sec machinery. In addition, like the cell wall-anchored protein A of S. aureus, a cell wall sorting signal including the LPXTG motif is also present at the carboxy terminus of each of the Spa proteins of corynebacteria and other pilus proteins found in different gram-positive organisms (17). It is thus logical to imagine that the pilus-specific sortase utilizes the LPXTG motif for pilus polymerization, its cell wall anchoring, or both. Substantial genetic, biochemical, and ultrastructural analyses have proved this prediction. Consequently, Ton-That and Schneewind proposed a model of pilus assembly which posited that the basic mechanism of catalysis is conserved between cell wall sorting of surface proteins and the assembly of the pilus (31).According to our current working model (Fig. ​(Fig.1A),1A), the prototype SpaA pilus is assembled as follows. SrtA, which is essential and also specific for SpaA pilus formation, captures and cleaves cognate pilins at the LPXTG motif and forms an acyl enzyme intermediate. To form a dimer of SpaA and SpaC, the proposed tip entity, a conserved lysine in the SpaA pilin motif attacks the Cys-Thr bond of the SpaC-SrtA acyl enzyme intermediate. Shaft formation ensues by the cyclic addition of SpaA to the SpaC-SpaA dimer and the SpaC-SpaA_n oligomer formed in the preceding reaction. When a SpaB is attached to the growing pilus terminus by a similar mechanism involving a critical lysine of SpaB, it acts as a switch, terminating pilus polymerization in favor of cell wall anchoring (11). This happens by the classic resolution reaction mentioned above, which involves the lipid II precursor (28), followed by its linkage to the cell wall (11). Alternatively, the SpaB-containing pilus can elongate further by adding a SpaA subunit to SpaB (11). This model explains all the available genetic and biochemical data we have obtained so far in the corynebacterial system, as well as other systems reported by various investigators.Open in a separate windowFIG. 1.(A) Working model of pilus assembly in C. diphtheriae. Spa pilins are synthesized in the cytoplasm and transported across the cytoplasmic membrane by the Sec machinery. The membrane-bound pilus-specific sortase SrtA cleaves the Spa pilins at the LPXTG motif and forms an acyl enzyme intermediate with the substrates. Pilus polymerization occurs when this intermediate is resolved by a nucleophilic attack by the lysine residue within the pilin motif of an adjacent intermediate. Cell wall anchoring terminates pilus polymerization when SpaB is incorporated into the pilus base by the housekeeping sortase, SrtF (see the text for details). (B) Membrane localization of the pilus-specific sortase SrtA. Corynebacteria grown to mid-log phase were separated from the culture medium (M) by centrifugation. The cell wall (W) was removed from its protoplast by muramidase treatment of the cells. The protoplasts were lysed, and membrane (P*) and cytoplasmic (C) compartments were obtained by ultracentrifugation. Protein samples were separated on 4 to 12% Tris-glycine gradient gels and detected by immunoblotting them with the specific antisera α-SrtA, α-SecA, and α-SpaA. The positions of molecular mass markers (kDa) are indicated. WT, wild type.Significantly, there has been no report demonstrating the proposed intermediates of pilus assembly, to our knowledge. The present study was initiated to explore this key element of our model of pilus assembly, as well as the localization of the sortase in the membrane and its organization in the exoplasmic membrane in relation to the cognate pilins and the general secretion machinery.     

Pili with strong attachments: Gram-positive bacteria do it differently

Bacteria attach to their appropriate environmental niche by using adhesins. To maximize their contact with the environment, adhesins are often present on the ends of long hairlike structures called pili. Recently, attention has focused on pili of Gram-positive bacteria because they may be vaccine candidates in important human pathogens. These pili differ from the well-studied pili of Gram-negative bacteria because their subunits are covalently linked, they do not require specific chaperones for assembly, and the tip protein (likely to be the adhesin) is not required to initiate formation of the pilus structure. In Gram-positive bacteria, the genes for pili occur in clusters, which may constitute mobile genetic elements. These clusters include the transpeptidase(s) of the sortase family that is/are required for polymerization of the subunit proteins. However, efficient covalent attachment of the completed pilus structure to the cell wall is accomplished, in cases where this has been studied, by the 'housekeeping' sortase, which is responsible for attachment to the peptidoglycan of most surface proteins containing cell wall sorting signals. This enzyme is encoded elsewhere on the genome. Because pili of Gram-positive bacteria have not been extensively investigated yet, we hope that this MicroReview will help to pinpoint the areas most in need of further study.     

Assembly of pili on the surface of Bacillus cereus vegetative cells

Vegetative forms of Bacillus cereus are reported to form pili, thin protein filaments that protrude up to 1 mum from the bacterial surface. Pili are assembled from two precursor proteins, BcpA and BcpB, in a manner requiring a pilus-associated sortase enzyme (SrtD). Pili are also formed on the surface of Bacillus anthracis expressing bcpA-srtD-bcpB. BcpA is distributed throughout the entire pilus, whereas BcpB appears positioned at its tip. In agreement with the hypothesis for pilus assembly in Gram-positive bacteria, BcpA encompasses the YPK pilin motif and the LPXTG sorting signal, each of which is absolutely required for the incorporation of BcpA and BcpB into pili. In contrast to BcpB, which relies on the presence of BcpA for incorporation into pili, BcpA fibre assembly occurs even in the absence of BcpB. B. anthracis sortase A (srtA), but not sortase B (srtB) or C (srtC), is required for proper anchoring of pili to the bacterial envelope, suggesting that BcpA/BcpB pili are linked to peptidoglycan cross-bridges.     

A novel sortase, SrtC2, from Streptococcus pyogenes anchors a surface protein containing a QVPTGV motif to the cell wall

The important human pathogen Streptococcus pyogenes (group A streptococcus GAS), requires several surface proteins to interact with its human host. Many of these are covalently linked by a sortase enzyme to the cell wall via a C-terminal LPXTG motif. This motif is followed by a hydrophobic region and charged C terminus, which are thought to retard the protein in the cell membrane to facilitate recognition by the membrane-localized sortase. Previously, we identified two sortase enzymes in GAS. SrtA is found in all GAS strains and anchors most proteins containing LPXTG, while SrtB is present only in some strains and anchors a subset of LPXTG-containing proteins. We now report the presence of a third sortase in most strains of GAS, SrtC. We show that SrtC mediates attachment of a protein with a QVPTGV motif preceding a hydrophobic region and charged tail. We also demonstrate that the QVPTGV sequence is a substrate for anchoring of this protein by SrtC. Furthermore, replacing this motif with LPSTGE, found in the SrtA-anchored M protein of GAS, leads to SrtA-dependent secretion of the protein but does not lead to its anchoring by SrtA. We conclude that srtC encodes a novel sortase that anchors a protein containing a QVPTGV motif to the surface of GAS.     

Crystal structures of Staphylococcus aureus sortase A and its substrate complex

The cell wall envelope of staphylococci and other Gram-positive pathogens is coated with surface proteins that interact with human host tissues. Surface proteins of Staphylococcus aureus are covalently linked to the cell wall envelope by a mechanism requiring C-terminal sorting signals with an LPXTG motif. Sortase (SrtA) cleaves surface proteins between the threonine (T) and the glycine (G) of the LPXTG motif and catalyzes the formation of an amide bond between threonine at the C-terminal end of polypeptides and cell wall cross-bridges. The active site architecture and catalytic mechanism of sortase A has hitherto not been revealed. Here we present the crystal structures of native SrtA, of an active site mutant of SrtA, and of the mutant SrtA complexed with its substrate LPETG peptide and describe the substrate binding pocket of the enzyme. Highly conserved proline (P) and threonine (T) residues of the LPXTG motif are held in position by hydrophobic contacts, whereas the glutamic acid residue (E) at the X position points out into the solvent. The scissile T-G peptide bond is positioned between the active site Cys(184) and Arg(197) residues and at a greater distance from the imidazolium side chain of His(120). All three residues, His(120), Cys(184), and Arg(197), are conserved in sortase enzymes from Gram-positive bacteria. Comparison of the active sites of S. aureus sortase A and sortase B provides insight into substrate specificity and suggests a universal sortase-catalyzed mechanism of bacterial surface protein anchoring in Gram-positive bacteria.     

Cell wall anchor structure of BcpA pili in Bacillus anthracis

Assembly of pili in Gram-positive bacteria and their attachment to the cell wall envelope are mediated by sortases. In Bacillus cereus and its close relative Bacillus anthracis, the major pilin protein BcpA is cleaved between the threonine and the glycine of its C-terminal LPXTG motif sorting signal by the pilin-specific sortase D. The resulting acyl enzyme intermediate is relieved by the nucleophilic attack of the side-chain amino group of lysine within the YPKN motif of another BcpA subunit. Cell wall anchoring of assembled BcpA pili requires sortase A, which also cleaves the LPXTG sorting signal of BcpA between its threonine and glycine residues. We show here that sortases A and D require only the C-terminal sorting signal of BcpA for substrate cleavage. Unlike sortase D, which accepts the YPKN motif as a nucleophile, sortase A forms an amide bond between the BcpA C-terminal carboxyl group of threonine and the side-chain amino group of diaminopimelic acid within the cell wall peptidoglycan of bacilli. These results represent the first demonstration of a cell wall anchor structure for pili, which are deposited by sortase A into the envelope of many different microbes.