Nearly complete genetic maps of <Emphasis Type="Italic">Pinus sylvestris</Emphasis> L. (Scots pine) constructed by AFLP marker analysis in a full-sib family

We have constructed nearly complete linkage maps of Pinus sylvestris (L.) using AFLP markers based on a two-way pseudo-testcross strategy in a full-sib family founded in an advanced breeding program. With 39 primer combinations, a total of 737 markers (320 from the mother and 417 from the father) segregated in a 1:1 ratio, corresponding to DNA polymorphism: heterozygous in one parent and null in the other. In the maternal parent, 188 framework markers were mapped in 12 linkage groups, equivalent to the Pinus haploid chromosome number, with a total coverage of 1,695.5 cM. In the paternal parent, 245 framework markers established a map with 15 linkage groups, spanning a genome length of 1,718.5 cM. The estimated total map length was L(F) = 1,681 cM for the female and L(M) = 1,645 cM for the male using a modified method-of-moment estimator. Combining these values with those estimated from the observed map lengths in both parents, we estimated the genome length in Scots pine to be between 1,600 and 2,100 cM. Our genome coverage was estimated to be more than 98% with a framework marker interval of 20 cM for both parents. Most of the female and male linkage groups were associated through the analysis of the intercross markers.     

Construction of an AFLP genetic map with nearly complete genome coverage in Pinus taeda

  De novo construction of complete genetic linkage maps requires large mapping populations, large numbers of genetic markers, and efficient algorithms for ordering markers and evaluating order confidence. We constructed a complete genetic map of an individual loblolly pine (Pinus taeda L.) using amplified fragment length polymorphism (AFLP) markers segregating in haploid megagametophytes and PGRI mapping software. We generated 521 polymorphic fragments from 21 AFLP primer pairs. A total of 508 fragments mapped to 12 linkage groups, which is equal to the Pinus haploid chromosome number. Bootstrap locus order matrices and recombination matrices generated by PGRI were used to select 184 framework markers that could be ordered confidently. Order support was also evaluated using log likelihood criteria in MAPMAKER. Optimal marker orders from PGRI and MAPMAKER were identical, but the implied reliability of orders differed greatly. The framework map provides nearly complete coverage of the genome, estimated at approximately 1700 cM in length using a modified estimator. This map should provide a useful framework for merging existing loblolly pine maps and adding multiallelic markers as they become available. Map coverage with dominant markers in both linkage phases will make the map useful for subsequent quantitative trait locus mapping in families derived by self-pollination. Received: 7 August 1998 / Accepted: 27 October 1998     

No clustering for linkage map based on low-copy and undermethylated microsatellites.

Clustering has been reported for conifer genetic maps based on hypomethylated or low-copy molecular markers, resulting in uneven marker distribution. To test this, a framework genetic map was constructed from three types of microsatellites: low-copy, undermethylated, and genomic. These Pinus taeda L. microsatellites were mapped using a three-generation pedigree with 118 progeny. The microsatellites were highly informative; of the 32 markers in intercross configuration, 29 were segregating for three or four alleles in the progeny. The sex-averaged map placed 51 of the 95 markers in 15 linkage groups at LOD > 4.0. No clustering or uneven distribution across the genome was observed. The three types of P. taeda microsatellites were randomly dispersed within each linkage group. The 51 microsatellites covered a map distance of 795 cM, an average distance of 21.8 cM between markers, roughly half of the estimated total map length. The minimum and maximum distances between any two bins was 4.4 and 45.3 cM, respectively. These microsatellites provided anchor points for framework mapping for polymorphism in P. taeda and other closely related hard pines.     

A genetic linkage map of Pacific white shrimp (<Emphasis Type="Italic">Litopenaeus vannamei</Emphasis>): sex-linked microsatellite markers and high recombination rates

Pacific white shrimp (Litopenaeus vannamei) is the leading species farmed in the Western Hemisphere and an economically important aquaculture species in China. In this project, a genetic linkage map was constructed using amplified fragment length polymorphism (AFLP) and microsatellite markers. One hundred and eight select AFLP primer combinations and 30 polymorphic microsatellite markers produced 2071 markers that were polymorphic in either of the parents and segregated in the progeny. Of these segregating markers, 319 were mapped to 45 linkage groups of the female framework map, covering a total of 4134.4 cM; and 267 markers were assigned to 45 linkage groups of the male map, covering a total of 3220.9 cM. High recombination rates were found in both parental maps. A sex-linked microsatellite marker was mapped on the female map with 6.6 cM to sex and a LOD of 17.8, two other microsatellite markers were also linked with both 8.6 cM to sex and LOD score of 14.3 and 16.4. The genetic maps presented here will serve as a basis for the construction of a high-resolution genetic map, quantitative trait loci (QTLs) detection, marker-assisted selection (MAS) and comparative genome mapping.     

A comparative genetic map of the turkey genome

Genetic markers (microsatellites and SNPs) were used to create and compare maps of the turkey and chicken genomes. A physical map of the chicken genome was built by comparing sequences of turkey markers with the chicken whole-genome sequence by BLAST analysis. A genetic linkage map of the turkey genome (Meleagris gallopavo) was developed by segregation analysis of genetic markers within the University of Minnesota/Nicholas Turkey Breeding Farms (UMN/NTBF) resource population. This linkage map of the turkey genome includes 314 loci arranged into 29 linkage groups. An additional 40 markers are tentatively placed within linkage groups based on two-point LOD scores and 16 markers remain unlinked. Total map distance contained within linkage groups is 2,011 cM with the longest linkage group (47 loci) measuring 413.3 cM. Average marker interval over the 29 linkage groups was 6.4 cM. All but one turkey linkage group could be aligned with the physical map of the chicken genome. The present genetic map of the turkey provides a comparative framework for future genomic studies.     

Genetic linkage map of the eastern oyster Crassostrea virginica Gmelin

Amplified fragment length polymorphisms (AFLPs), along with some microsatellite and Type I markers, were used for linkage analysis in Crassostrea virginica Gmelin, the eastern oyster. Seventeen AFLP primer combinations were selected for linkage analysis with two parents and their 81 progeny. The 17 primer combinations produced 396 polymorphic markers, and 282 of them were segregating in the two parents. Chi-square analysis indicated that 259 (91.8%) markers segregated in Mendelian ratio, while the other 23 (8.2%) showed significant (P < 0.05) segregation distortion, primarily for homozygote deficiency and probably due to deleterious recessive genes. Moderately dense linkage maps were constructed using 158 and 133 segregating markers (including a few microsatellite and Type I markers) from male and female parents, respectively. The male framework map consisted of 114 markers in 12 linkage groups, covering 647 cM. The female map had 84 markers in 12 linkage groups with a length of 904 cM. The estimated genome length was 858 cM for the male map and 1296 cM for the female map. The observed genome coverage was 84% for the male and female map when all linked markers were considered. Genetic maps observed in this study are longer than the cytogenetic map, possibly because of low marker density.     

Combination of multipoint maximum likelihood (MML) and regression mapping algorithms to construct a high-density genetic linkage map for loblolly pine (Pinus taeda L.)

Genetic maps have been successfully applied to assist in the dissection of complex traits, provide insight on genome structure, and estimate recombination in conjunction with physical maps. Despite an extensive list of genetic maps developed for loblolly pine (Pinus taeda L.) over the past two decades, a high-density consensus map has not yet been constructed. In this study, we used two reference three-generation outbred pedigrees, base and qtl, obtained from the North Carolina State University Cooperative Tree Improvement Program, to obtain a high-density genetic consensus map. Both populations were genotyped with ≈ 7,000 different markers (restriction fragment length polymorphisms, expressed sequence tag polymorphisms, simple sequence repeats, SNPs). The grouping, ordering, and spacing of the markers on each linkage group were performed with JoinMap® 4.1, which implements the multipoint maximum likelihood algorithm for outbred populations. The final consensus map contains 2,466 markers, with a total length of 1,476 centimorgans (cM). The average marker density across the 12 linkage groups was 0.62 cM/marker. This high-density map provides an important resource for breeders and geneticists and will enable comparative studies across species, as well as improve the loblolly pine genome sequence assembly.     

RAPD markers linked to a gene for resistance to pine needle gall midge in Japanese black pine (Pinus thunbergii)

Linkage of RAPD markers to a single dominant gene for resistance to pine needle gall midge was investigated in Japanese black pine (Pinus thunbergii). Three primers that generated linked markers were found after 1160 primers were screened by bulked segregant analysis. The distances between the resistance gene, R, and the marker genes OPC06580, OPD01700, and OPAX192100 were 5.1 cM, 6.7 cM and 13.6 cM, respectively. OPC06580 was in coupling phase to R, whereas OPD01700 and OPAX192100 were in repulsion phase to R. A linkage map for a resistant tree was constructed using 96 macrogametophytes. In linkage analysis, 98 out of 127 polymorphic markers were assigned to 17 linkage groups and six linked pairs. The total length of this map was 1469.8 cM, with an average marker density of 15.6 cM. The genome length was estimated to be 2138.3 cM, and the derived linkage map covered 67.5% of the genome. Although the linked markers OPC06580, OPAX192100, and OPD01700, belonged to the same linkage group, no precise positions were found for OPC06580 or OPD01700. Received: 15 May 1999 / Accepted: 29 July 1999     

Genomic analysis in maritime pine (Pinus pinaster). Comparison of two RAPD maps using selfed and open-pollinated seeds of the same individual

Two genomic maps were constructed for one individual tree of maritime pine, Pinus pinaster Ait., using a common set of 263 RAPD markers (random amplified polymorphic DNA). The RAPD markers were chosen from a larger number of polymorphic RAPD fragments on the basis of repeatability and inheritance in a three-generation pedigree. The maps were constructed from two independent mapping samples of 62 megagametophytes (In) from a self cross and from an open-pollinated cross. The markers were grouped (LOD≥4; θ≤0.25) and assigned to 13 major and 5 minor linkage groups. Two framework maps were constructed using the ordering criterion of interval support≥3. Comparison of the two framework maps suggested that the locus order was incorrect for 2% of the framework markers. A bootstrap analysis showed that this error rate was representative for our data set. The results showed that framework maps constructed using RAPD markers were repeatable and that differences in locus order for maps of different genotypes or species could result from chance. The total map distance was 1380 cM, and the map provided coverage of approximately 90% of the genome.     

Integrated consensus genetic and physical maps of flax (Linum usitatissimum L.)

Three linkage maps of flax (Linum usitatissimum L.) were constructed from populations CDC Bethune/Macbeth, E1747/Viking and SP2047/UGG5-5 containing between 385 and 469 mapped markers each. The first consensus map of flax was constructed incorporating 770 markers based on 371 shared markers including 114 that were shared by all three populations and 257 shared between any two populations. The 15 linkage group map corresponds to the haploid number of chromosomes of this species. The marker order of the consensus map was largely collinear in all three individual maps but a few local inversions and marker rearrangements spanning short intervals were observed. Segregation distortion was present in all linkage groups which contained 1–52 markers displaying non-Mendelian segregation. The total length of the consensus genetic map is 1,551?cM with a mean marker density of 2.0?cM. A total of 670 markers were anchored to 204 of the 416 fingerprinted contigs of the physical map corresponding to ~274?Mb or 74?% of the estimated flax genome size of 370?Mb. This high resolution consensus map will be a resource for comparative genomics, genome organization, evolution studies and anchoring of the whole genome shotgun sequence.     

A second‐generation genetic linkage map for bighead carp (Aristichthys nobilis) based on microsatellite markers

Bighead carp (Aristichthys nobilis) is an important aquaculture fish worldwide. Genetic linkage maps for the species were previously reported, but map resolution remained to be improved. In this study, a second‐generation genetic linkage map was constructed for bighead carp through a pseudo‐testcross strategy using interspecific hybrids between bighead carp and silver carp. Of the 754 microsatellites genotyped in two interspecific mapping families (with 77 progenies for each family), 659 markers were assigned to 24 linkage groups, which were equal to the chromosome numbers of the haploid genome. The consensus map spanned 1917.3 cM covering 92.8% of the estimated bighead carp genome with an average marker interval of 2.9 cM. The length of linkage groups ranged from 52.2 to 133.5 cM with an average of 79.9 cM. The number of markers per linkage group varied from 11 to 55 with an average of 27.5 per linkage group. Normality tests on interval distances of the map showed a non‐normal marker distribution; however, significant correlation was found between the length of linkage group and the number of markers below the 0.01 significance level (two‐tailed). The length of the female map was 1.12 times that of the male map, and the average recombination ratio of female to male was 1.10:1. Visual inspection showed that distorted markers gathered in some linkage groups and in certain regions of the male and female maps. This well‐defined genetic linkage map will provide a basic framework for further genome mapping of quantitative traits, comparative mapping and marker‐assisted breeding in bighead carp.     

Application of AFLP, RAPD and ISSR markers to genetic mapping of European and Japanese larch

Genetic linkage maps have been increasingly developed for a wide variety of plants, using segregating populations such as F₂s or backcrosses between inbred lines. These pedigrees are rarely available in outbred species like forest trees which have long generation times. Thus genetic mapping studies have to use peculiar pedigrees and markers in appropriate configurations. We constructed single-tree genetic linkage maps of European larch (Larix decidua Mill.) and Japanese larch [Larix kaempferi (Lamb.) Carr.] using segregation data from 112 progeny individuals of an hybrid family. A total of 266 markers (114 AFLP, 149 RAPD and 3 ISSR loci) showing a testcross configuration, i.e.heterozygous in one parent and null in the other parent, were grouped at LOD 4.0, θ=0.3. The maternal parent map (L. decidua)consisted of 117 markers partitioned within 17 linkage groups (1152 cM) and the paternal parent map (L. kaempferi) had 125 markers assembled into 21 linkage groups (1206 cM). The map distance covered by markers was determined by adding a 34.7-cM independence distance at the end of each group and unlinked marker. It reached 2537 cM and 2997 cM respectively for European larch and Japanese larch, and represented respectively a 79.6% and 80.8% coverage of the overall genome. A few 3:1 segregating markers were used to identify homologous linkage groups between the European larch and the Japanese larch genetic maps. The PCR-based molecular markers allowed the construction of genetic maps, thus ensuring a good coverage of the larch genome for further QTL detection and mapping studies. Received: 15 March 1999 / Accepted: 29 March 1999     

Construction of an integrated map of rose with AFLP, SSR, PK, RGA, RFLP, SCAR and morphological markers

A high-density genetic map with a number of anchor markers has been created to be used as a tool to dissect genetic variation in rose. Linkage maps for the diploid 94/1 population consisting of 88 individuals were constructed using a total of 520 molecular markers including AFLP, SSR, PK, RGA, RFLP, SCAR and morphological markers. Seven linkage groups, putatively corresponding to the seven haploid rose chromosomes, were identified for each parent, spanning 487 cM and 490 cM, respectively. The average length of 70 cM may cover more than 90% of the rose genome. An integrated map was constructed by incorporating the homologous parental linkage groups, resulting in seven linkage groups with a total length of 545 cM. The present linkage map is currently the most advanced map in rose with regard to marker density, genome coverage and with robust markers, giving good perspectives for QTL mapping and marker-assisted breeding in rose. The SSR markers, together with RFLP markers, provide good anchor points for future map alignment studies in rose and related species. Codominantly scored AFLP markers were helpful in the integration of the parental maps.     

RAPD-based genetic linkage maps of yellow passion fruit (Passiflora edulis Sims. f. flavicarpa Deg.).

A single cross between two clones of passion fruit (Passiflora edulis Sims. f. flavicarpa Deg., 2n = 18) was selected for genetic mapping. The mapping population was composed of 90 F1 plants derived from a cross between 'IAPAR 123' (female parent) and 'IAPAR 06' (male parent). A total of 380 RAPD primers were analyzed according to two-way pseudo-testcross mapping design. The linkage analysis was performed using Mapmaker version 3.0 with LOD 4.0 and a maximum recombination fraction (theta) of 0.30. Map distances were estimated using the Kosambi mapping function. Linkage maps were constructed with 269 loci (2.38 markers/primer), of which 255 segregated 1:1, corresponding to a heterozygous state in one parent and null in the other. The linkage map for 'IAPAR123' consisted of 135 markers. A total of nine linkage groups were assembled covering 727.7 cM, with an average distance of 11.20 cM between framework loci. The sizes of the linkage groups ranged from 56 to 144.6 cM. The linkage map for 'IAPAR 06' consisted of 96 markers, covering 783.5 cM. The average distance between framework loci was 12.2 cM. The length of the nine linkage groups ranged from 20.6 to 144.2 cM. On average, both maps provided 61% genome coverage. Twenty-four loci (8.9%) remained unlinked. Among their many applications, these maps are a starting point for the identification of quantitative trait loci for resistance to the main bacterial disease affecting passion fruit orchards in Brazil, caused by Xanthomonas campestris pv. passiflorae, because parental genotypes exhibit diverse responses to bacterial inoculation.     

An integrated and comparative genetic map of the turkey genome

An integrated genetic linkage map was developed for the turkey (Meleagris gallopavo) that combines the genetic markers from the three previous mapping efforts. The UMN integrated map includes 613 loci arranged into 41 linkage groups. An additional 105 markers are tentatively placed within linkage groups based on two-point LOD scores and 19 markers remain unlinked. A total of 210 previously unmapped markers has been added to the UMN turkey genetic map. Markers from each of the 20 linkage groups identified in the Roslin map and the 22 linkage groups of the Nte map are incorporated into the new integrated map. Overall map distance contained within the 41 linkage groups is 3,365 cM (sex-averaged) with the largest linkage group (94 loci) measuring 533.1 cM. Average marker interval for the map was 7.86 cM. Sequences of markers included in the new map were compared to the chicken genome sequence by 'BLASTN'. Significant similarity scores were obtained for 95.6% of the turkey sequences encompassing an estimated 91% of the chicken genome. A physical map of the chicken genome based on positions of the turkey sequences was built and 36 of the 41 turkey linkage groups were aligned with the physical map, five linkage groups remain unassigned. Given the close similarities between the turkey and chicken genomes, the chicken genome sequence could serve as a scaffold for a genome sequencing effort in the turkey.     

AFLP-Based Genetic Linkage Maps of the Pacific Oyster <Emphasis Type="Italic">Crassostrea gigas</Emphasis> Thunberg

Amplified fragment length polymorphisms (AFLPs) were used for genome mapping in the Pacific oyster Crassostrea gigas Thunberg. Seventeen selected primer combinations produced 1106 peaks, of which 384 (34.7%) were polymorphic in a backcross family. Among the polymorphic markers, 349 were segregating through either the female or the male parent. Chi-square analysis indicated that 255 (73.1%) of the markers segregated in a Mendelian ratio, and 94 (26.9%) showed significant (P < 0.05) segregation distortion. Separate genetic linkage maps were constructed for the female and male parents. The female framework map consisted of 119 markers in 11 linkage groups, spanning 1030.7 cM, with an average interval of 9.5 cM per marker. The male map contained 96 markers in 10 linkage groups, covering 758.4 cM, with 8.8 cM per marker. The estimated genome length of the Pacific oyster was 1258 cM for the female and 933 cM for the male, and the observed coverage was 82.0% for the female map and 81.3% for the male map. Most distorted markers were deficient for homozygotes and closely linked to each other on the genetic map, suggesting the presence of major recessive deleterious genes in the Pacific oyster.     

Linkage maps of microsatellite DNA markers for the Pacific oyster Crassostrea gigas

We constructed male and female consensus linkage maps for the Pacific oyster Crassostrea gigas, using a total of 102 microsatellite DNA markers typed in 11-day-old larvae from three families. We identified 11 and 12 linkage groups in the male and female consensus maps, respectively. Alignment of these separate maps, however, suggests 10 linkage groups, which agrees with the haploid chromosome number. The male linkage map comprises 88 loci and spans 616.1 cM, while the female map comprises 86 loci and spans 770.5 cM. The male and the female maps share 74 loci; 2 markers remain unlinked. The estimated coverages for the consensus linkage maps are 79% for the male and 70-75% for the female, on the basis of two estimates of genome length. Ninety-five percent of the genome is expected to lie within 16 and 21 cM of markers on the male and female maps, respectively, while 95% of simulated minimum distances to the male and female maps are within 10.1 and 13.6 cM, respectively. Females have significantly more recombination than males, across 118 pairs of linked markers in common to the parents of the three families. Significant differences in recombination and orders of markers are also evident among same-sex parents of different families as well as sibling parents of opposite sex. These observations suggest that polymorphism for chromosomal rearrangements may exist in natural populations, which could have profound implications for interpreting the evolutionary genetics of the oyster. These are the first linkage maps for a bivalve mollusc that use microsatellite DNA markers, which should enable them to be transferred to other families and to be useful for further genetic analyses such as QTL mapping.     

A genetic linkage map of red drum,Sciaenops ocellatus

Second‐generation, sex‐specific genetic linkage maps were generated for the economically important estuarine‐dependent marine fish Sciaenops ocellatus (red drum). The maps were based on F₁ progeny from each of two single‐pair mating families. A total of 237 nuclear‐encoded microsatellite markers were mapped to 25 linkage groups. The female map contained 226 markers, with a total length of 1270.9 centiMorgans (cM) and an average inter‐marker interval of 6.53 cM; the male map contained 201 markers, with a total length of 1122.9 cM and an average inter‐marker interval of 6.03 cM. The overall recombination rate was approximately equal in the two sexes (♀:♂ = 1.03:1). Recombination rates in a number of linkage intervals, however, differed significantly between the same sex in both families and between sexes within families. The former occurred in 2.4% of mapped intervals, while the latter occurred in 51.2% of mapped intervals. Sex‐specific recombination rates varied within chromosomes, with regions of both female‐biased and male‐biased recombination. Original clones from which the microsatellite markers were generated were compared with genome sequence data for the spotted green puffer, Tetraodon nigroviridis; a total of 43 matches were located in 17 of 21 chromosomes of T. nigroviridis, while seven matches were in unknown portions of the T. nigroviridis genome. The map for red drum provides a new, useful tool for aquaculture, population genetics, and comparative genomics of this economically important marine species.     

Consensus and comprehensive linkage maps of bovine chromosome 24

This study describes development of a consensus genetic linkage map of bovine chromosome 24 (BTA24). Eight participating laboratories contributed data for 58 unique markers including a total of 25 409 meioses. Eighteen markers, which were typed in more than one reference population, were used as potential anchors to generate a consensus framework map. The framework map contained 16 loci ordered with odds greater than 1000:1 and spanned 79.3 cM. Remaining markers were included in a comprehensive map relative to these anchors. The resulting BTA24 comprehensive map was 98.3 cM in length. Average marker intervals were 6.1 and 2.5 cM for framework and comprehensive maps, respectively. Marker order was generally consistent with previously reported BTA24 linkage maps. Only one discrepancy was found when comparing the comprehensive map with the published USDA-MARC linkage map. Integration of genetic information from different maps provides a high-resolution BTA24 linkage map.     

First International Workshop on Porcine Chromosome 6

Recent advances in the use of microsatellite markers and the development of comparative gene mapping techniques have made the construction of high resolution genetic maps of livestock species possible. Framework and comprehensive genetic linkage maps of porcine chromosome 6 have resulted from the first international effort to integrate genetic maps from multiple laboratories. Eleven highly polymorphic genetic markers were exchanged and mapped by four independent laboratories on a total of 583 animals derived from four reference populations. The chromosome 6 framework map consists of 10 markers ordered with high local support. The average marker interval of the framework map is 15.1 cM (sex averaged). The framework map is 135, 175 and 109 cM in length (for sex averaged, female and male maps, respectively). The comprehensive map includes a total of 48 type I and type II markers with a sex averaged interval of 3.5 cM and is 166, 196 and 126 cM (for sex averaged, female and male maps, respectively). Additional markers within framework map marker intervals can thus be selected from the comprehensive map for further analysis of quantitive trait loci (QTL) located on chromosome 6. The resulting maps of swine chromosome 6 provide a valuable tool for analysing and locating QTL.