Isolation and molecular characterization of a cryptic plasmid from <Emphasis Type="Italic">Bifidobacterium longum</Emphasis>

An isolate from the fecal samples of children was identified as Bifidobacterium longum. A plasmid isolated from it pBIFA24 was 4,892 bp with three open reading frames, ORFI, ORFII, and ORFIII. ORFI encoded a replication protein involved in a rolling-circle replication mechanism, and three sets of tandem repeat sequences featuring iteron structure were identified. Secondary structure prediction analysis of ORFII suggested it was a transmembrane protein. ORFIII showed high amino acid sequence identity with some mobilization proteins and contained an oriT sequence.     

Minireplicon from pBtoxis of Bacillus thuringiensis subsp. israelensis

A 2.2-kb fragment containing a replicon from pBtoxis, the large plasmid that encodes the insecticidal endotoxins of Bacillus thuringiensis subsp. israelensis, was identified, cloned, and sequenced. This fragment contains cis elements, including iterons, found in replication origins of other large plasmids and suggests that pBtoxis replicates by a type A theta mechanism. Two genes, pBt156 and pBt157, encoding proteins of 54.4 kDa and 11.8 kDa, respectively, were present in an operon within this minireplicon, and each was shown by deletion analysis to be essential for replication. The deduced amino acid sequences of the 54.4-kDa and 11.8-kDa proteins showed no substantial homology with known replication (Rep) proteins. However, the 54.4-kDa protein contained a conserved FtsZ domain, and the 11.8 kDa protein contained a helix-turn-helix motif. As FtsZ proteins have known functions in bacterial cell division and the helix-turn-helix motif is present in Rep proteins, it is likely that these proteins function in plasmid replication and partitioning. The minireplicon had a copy number of two or three per chromosome equivalent in B. thuringiensis subsp. israelensis but did not replicate in B. cereus, B. megaterium, or B. subtilis. A plasmid constructed to synthesize large quantities of the Cry11A and Cyt1A endotoxins demonstrated that this minireplicon can be used to engineer vectors for cry and cyt gene expression.     

Analysis of the ruv locus of Escherichia coli K-12 and identification of the gene product.

The ruv gene of Escherichia coli, which is associated with inducible mechanisms of DNA repair and recombination, has been cloned into the low-copy plasmid vector pHSG415. The recombinant plasmid pPVA101 fully complements the DNA repair-deficient phenotype of ruv mutants. Restriction endonuclease analysis of this plasmid revealed a 10.6-kilobase (kb) HindIII DNA insert which contained a 7.7-kb PstI fragment identified as being from the chromosomal ruv region. Deletion analysis and Tn1000 insertional inactivation of ruv function located the ruv coding region to a 2.2-kb section of the cloned DNA fragment. A comparison of the proteins encoded by ruv wild-type and mutant plasmids identified the gene product as a protein of molecular weight 41,000.     

Nucleotide sequence of the iap gene, responsible for alkaline phosphatase isozyme conversion in Escherichia coli, and identification of the gene product.

The iap gene in Escherichia coli is responsible for the isozyme conversion of alkaline phosphatase. We analyzed the 1,664-nucleotide sequence of a chromosomal DNA segment that contained the iap gene and its flanking regions. The predicted iap product contained 345 amino acids with an estimated molecular weight of 37,919. The 24-amino-acid sequence at the amino terminus showed features characteristic of a signal peptide. Two proteins of different sizes were identified by the maxicell method, one corresponding to the Iap protein and the other corresponding to the processed product without the signal peptide. Neither the isozyme-converting activity nor labeled Iap proteins were detected in the osmotic-shock fluid of cells carrying a multicopy iap plasmid. The Iap protein seems to be associated with the membrane.     

Glycinin A3B4 mRNA. Cloning and sequencing of double-stranded cDNA complementary to a soybean storage protein

The cDNA clones encoding the precursor form of glycinin A3B4 subunit have been identified from a library of soybean cotyledonary cDNA clones in the plasmid pBR322 by a combination of differential colony hybridizations, and then by immunoprecipitation of hybrid-selected translation product with A3-mono-specific antiserum. A recombinant plasmid, designated pGA3B41425, from one of six clones covering codons for the NH2-terminal region of the subunit was sequenced, and the amino acid sequence was inferred from the nucleotide sequence, which showed that the mRNA codes for a precursor protein of 516 amino acids. Analysis of this cDNA also showed that it contained 1786 nucleotides of mRNA sequence with a 5'-terminal nontranslated region of 46 nucleotides, a signal peptide region corresponding to 24 amino acids, an A3 acidic subunit region corresponding to 320 amino acids followed by a B4 basic subunit region corresponding to 172 amino acids, and a 3'-terminal nontranslated region of 192 nucleotides, which contained two characteristic AAUAAA sequences that ended 110 nucleotides and 26 nucleotides from a 3'-terminal poly(A) segment, respectively. Our results confirm that glycinin is synthesized as precursor polypeptides which undergo post-translational processing to form the nonrandom polypeptide pairs via disulfide bonds. The inferred amino acid sequence of the mature basic subunit, B4, was compared to that of the basic subunit of pea legumin, Leg Beta, which contained 185 amino acids. Using an alignment that permitted a maximum homology of amino acids, it was found that overall 42% of the amino acid positions are identical in both proteins. These results led us to conclude that both storage proteins have a common ancestor.     

A novel cryptic plasmid pBMB175 from <Emphasis Type="Italic">Bacillus thuringiensis </Emphasis>subsp. <Emphasis Type="Italic">tenebrionis </Emphasis>YBT-1765

A new cryptic plasmid pBMB175 from Bacillus thuringiensis subsp. tenebrionis YBT-1765 was isolated and characterized. Sequence analysis showed that pBMB175 (14,841 bp and 31% GC content) contained at least eighteen putative open reading frames (ORFs), among which nine ORFs displayed the homology with the hypothetical proteins in rolling-circle replication plasmid pGI3. Deletion analysis revealed that the pBMB175 minireplicon located in a novel 1,151 bp fragment. This fragment contains ORF7 coding sequence, which encodes a protein (Rep175, 149 amino acids [aa]) indispensable for plasmid replication. Rep175 has no significant homology with known function proteins. Furthermore, a putative double-strand origin (dso), having no DNA similarity with characterized dso of other replicon so far, was identified in this minireplicon fragment. These features showed that pBMB175 could be placed into a new plasmid family.     

Minireplicon from pBtoxis of Bacillus thuringiensis subsp. israelensis

A 2.2-kb fragment containing a replicon from pBtoxis, the large plasmid that encodes the insecticidal endotoxins of Bacillus thuringiensis subsp. israelensis, was identified, cloned, and sequenced. This fragment contains cis elements, including iterons, found in replication origins of other large plasmids and suggests that pBtoxis replicates by a type A theta mechanism. Two genes, pBt156 and pBt157, encoding proteins of 54.4 kDa and 11.8 kDa, respectively, were present in an operon within this minireplicon, and each was shown by deletion analysis to be essential for replication. The deduced amino acid sequences of the 54.4-kDa and 11.8-kDa proteins showed no substantial homology with known replication (Rep) proteins. However, the 54.4-kDa protein contained a conserved FtsZ domain, and the 11.8 kDa protein contained a helix-turn-helix motif. As FtsZ proteins have known functions in bacterial cell division and the helix-turn-helix motif is present in Rep proteins, it is likely that these proteins function in plasmid replication and partitioning. The minireplicon had a copy number of two or three per chromosome equivalent in B. thuringiensis subsp. israelensis but did not replicate in B. cereus, B. megaterium, or B. subtilis. A plasmid constructed to synthesize large quantities of the Cry11A and Cyt1A endotoxins demonstrated that this minireplicon can be used to engineer vectors for cry and cyt gene expression.     

Genetic organization and nucleotide sequence of the stability locus of IncFII plasmid NR1

The stability (stb) locus of IncFII plasmid NR1 was mapped to a 1700 base-pair NaeI-TaqI restriction fragment. A series of unstable plasmids that contained insertion, deletion, and point mutations that inactivated the stability function was isolated. The unstable point mutants examined were all stabilized (complemented) in trans by a copy of the wild-type stb locus, suggesting that the mutations had inactivated diffusible gene products. The nucleotide sequence of the stb locus contained two tandem open reading frames, designated stbA and stbB, that encoded essential trans-acting protein products with predicted sizes of 36,000 Mr and 13,000 Mr, respectively. A third open reading frame, stbC, that could encode a peptide of 8000 Mr was contained within stbB in the complementary DNA strand. Plasmid-encoded proteins of 36,000 Mr and 13,000 Mr were identified in minicell experiments as the products of stbA and stbB, respectively. Unstable deletion mutants that retained the promoter proximal region of the stb locus upstream from stbA but had deleted both stbA and stbB were stabilized in trans by plasmids that could supply StbA and StbB. In contrast, deletion mutants that had lost the stbAB promoter region were not complemented in trans, indicating that this region contained an essential cis-acting site (or sites). Unlike some other loci that mediate stable plasmid inheritance, cloned copies of the wild-type stb locus of NR1 did not exert strong incompatibility (i.e. trans destabilization) against other stb+ derivatives of plasmid NR1 present in the same cell.     

Isolation and characterization of pHW15, a small cryptic plasmid from Rahnella genomospecies 2

A small cryptic plasmid designated pHW15 was isolated from Rahnella genomospecies 2 WMR15 and its complete nucleotide sequence was determined. The plasmid contained 3002 bp with a G+C content of 47.4%. The origin of replication was identified by deletion analysis as a region of about 600 bp. This region had an identity of 70% to the replication origin of the ColE1 plasmid at the nucleotide level. Sequence analysis revealed the typical elements: RNA I, RNA II and their corresponding promoters, a sequence allowing hybridisation of RNA II to the DNA and favouring processing by RNaseH, a single-strand initiation determinant (ssi) that allows initiation of lagging-strand synthesis, and a terH sequence required for termination of lagging-strand synthesis. The plasmid contained three expressed open reading frames, one of which showed homology to a ColE1 plasmid-encoded protein. Furthermore, a multimer resolution site was identified by sequence analysis. Its deletion resulted in formation of plasmid multimers during growth leading to an increased plasmid loss rate.     

Molecular Characterization of Plasmid pBM300 from Bacillus megaterium QM B1551

Strain QM B1551 of Bacillus megaterium contains seven compatible plasmids: two small rolling circle plasmids and five theta-replicating plasmids with cross-hybridizing replicons. To expand our understanding of these plasmids, the replicon region (6.7 kb) from pBM300 was cloned, sequenced, and functionally characterized. Sequence analysis showed that the replication protein (RepM300) was highly homologous to two other plasmid Rep proteins of the same strain but to no other known proteins. Furthermore, the location of the replication origin was within the RepM300 coding region, and the origin contained three 12-base direct repeats. Deletion analysis of the replicon confirmed the role of the Rep protein and showed that open reading frame 2 (ORF2) was required for stability. However, the protein encoded by ORF2 is entirely different from the replicon stability proteins encoded by the other two replicons. The entire plasmid was isolated from the plasmid array by integrating a spectinomycin resistance gene and transforming a plasmidless strain, PV361. Complete sequencing showed that pBM300 was 26,300 bp long, had a G+C content of 35.2%, and contained 20 ORFs, two of which encoded proteins that had no similarity to other proteins in the database. The proteins encoded by the plasmid ORFs had similarity to proteins for mobilization and transfer, an integrase, a rifampin resistance protein, a cell wall hydrolase, glutathione synthase, and a biotin carboxylase. The similarities were to several gram-positive genera and a few gram-negative genera and archaea. oriT and ssoT-like regions were detected near two mob genes. These results suggest that pBM300 is a mobilizable hybrid plasmid that confers increased metabolic and germination ability on its host. Its replicon also helps define a new plasmid family.     

Enhanced purification of plasmid DNA using Q-Sepharose by modulation of alcohol concentrations

Ion-exchange chromatography is one of the most commonly used methods for plasmid preparation. In this study a modified method was used to purify plasmid from bacterial lysate using Q-Sepharose. Incorporation of alcohols into the washing buffers enhanced the separation of plasmid from RNA and proteins. The use of isopropanol and ethanol achieved a high yield and purity whereas the use of methanol failed to improve the plasmid purification using Q-Sepharose by batch adsorption-desorption. Stepwise elution containing various concentrations of isopropanol and NaCl was used in preparative chromatography to enhance the plasmid purification. The same stepwise elution was applied to the chromatography columns packed with 0.5, 20, and 200 ml of Q-Sepharose for plasmid purification from 7.5, 300, and 3000 ml bacterial broth, respectively. Complete separation of DNA from RNA and proteins was achieved under gravity flow by modulation of the alcohol concentrations in the stepwise elution. These three scales of chromatography maintained an approximate plasmid yield and the purified plasmid contained undetectable levels of RNA and protein.     

Nucleotide sequence of Pseudomonas aeruginosa conjugative plasmid pUM505 containing virulence and heavy-metal resistance genes

We determined the complete nucleotide sequence of conjugative plasmid pUM505 isolated from a clinical strain of Pseudomonas aeruginosa. The plasmid had a length of 123,322 bp and contained 138 complete coding regions, including 46% open reading frames encoding hypothetical proteins. pUM505 can be considered a hybrid plasmid because it presents two well-defined regions. The first region corresponded to a larger DNA segment with homology to a pathogenicity island from virulent Pseudomonas strains; this island in pUM505 was comprised of genes probably involved in virulence and genes encoding proteins implicated in replication, maintenance and plasmid transfer. Sequence analysis identified pil genes encoding a type IV secretion system, establishing pUM505 as a member of the family of IncI1 plasmids. Plasmid pUM505 also contained virB4/virD4 homologues, which are linked to virulence in other plasmids. The second region, smaller in length, contains inorganic mercury and chromate resistance gene clusters both flanked by putative mobile elements. Although no genes for antibiotic resistance were identified, when pUM505 was transferred to a recipient strain of P. aeruginosa it conferred resistance to the fluoroquinolone ciprofloxacin. pUM505 also conferred resistance to the superoxide radical generator paraquat. pUM505 could provide Pseudomonas strains with a wide variety of adaptive traits such as virulence, heavy-metal and antibiotic resistance and oxidative stress tolerance which can be selective factors for the distribution and prevalence of this plasmid in diverse environments, including hospitals and heavy metal contaminated soils.     

Comparative analysis of eight Arthrobacter plasmids

Despite the prevalence of Arthrobacter in the environment little is known about their plasmids, or the capacity of Arthrobacter plasmids to mediate horizontal gene transfer. In this study, we compared eight plasmids from five Arthrobacter strains in order to identify putative core maintenance genes for replication, segregation, and conjugation. Iteron like sequences were identified on some of the plasmids; however, no genes with obvious similarity to known replication sequences such as an origin of replication, or rep genes were identified. All eight plasmids contained a putative conjugation system. Genes with similarity to a relaxase, coupling protein, and various components of a type IV secretion system were identified on each plasmid; it appears that three different systems may be present. Putative parA partitioning genes were found in all of the plasmids. Each of the Arthrobacter strains examined contained a putative parB gene; however, of the three plasmids in Arthrobacter strain FB24 only one plasmid had a putative parB gene. Cluster analysis of many of the Arthrobacter genes suggested that they often formed branches within existing families of plasmid maintenance genes. Comparison of a concatenation of all the maintenance genes from each plasmid suggests that the eight Arthrobacter plasmids represent multiple evolutionary pathways.     

Assessment of clone identity and sequence fidelity for 1189 IMAGE cDNA clones

This report documents the error rate in a commercially distributed subset of the IMAGE Consortium mouse cDNA clone collection. After isolation of plasmid DNA from 1189 bacterial stock cultures, only 62.2% were uncontaminated and contained cDNA inserts that had significant sequence identity to published data for the ordered clones. An agarose gel electrophoresis pre-screening strategy identified 361 stock cultures that appeared to contain two or more plasmid species. Isolation of individual colonies from these stocks demonstrated that 7.1% of the original 1189 stocks contained both a correct and an incorrect plasmid. 5.9% of the original 1189 stocks contained multiple, distinct, incorrect plasmids, indicating the likelihood of multiple contaminating events. While only 739 of the stocks purchased contained the desired cDNA clone, agarose gel pre-screening, colony isolation and similarity searching of dbEST allowed for the identification of an additional 420 clones that would have otherwise been discarded. Considering the high error rate in this subset of the IMAGE cDNA clone set, the use of sequence verified clones for cDNA microarray construction is warranted. When this is not possible, pre-screening non-sequence verified clones with agarose gel electrophoresis provides an inexpensive and efficient method to eliminate contaminated clones from the probe set.     

A mitochondrial plasmid that promotes mitochondrial fusion inPhysarum polycephalum

Summary We have identified a novel mitochondrial plasmid of about 16 kbp inPhysarum polycephalum. This plasmid was apparently responsible for promoting mitochondrial fusion. Only in strains carrying the plasmid, small spherical mitochondria fused with one another to form large knotted multinucleate mitochondria which subsequently nderwent fusion between the areas (mt-nuclear) that contained the mitochondrial DNA (mtDNA) derived from individual mitochondria. Several successive mitochondrial divisions followed, accompanied by mt-nuclear divisions. The resulting mitochondria contained recombinant mtDNAs, but the plasmid was transmitted to all mitochondria without any structural change.