Mechanism of extraction of chymotrypsin into isooctane at very low concentrations of aerosol OT in the absence of reversed micelles

Chymotrypsin is easily extracted from an aqueous solution into isooctane containing the anionic surfactant aerosol OT (AOT). The concentration of AOT needed to efficiently extract 0.5 mg/mL CMT is as low as 1 mM and as low as 0.2 mM AOT was sufficient to extract the protein into isooctane. The extraction process was unaffected by 10% (v/v) ethyl acetate in the isooctane phase. Moreover, spectroscopic analysis by electron paramagnetic resonance indicated that CMT did not exist inside a discreet water pool of a reversed micelle. Calculations of the number of AOT molecules associated per extracted CMT molecule indicate that only ca. 30 surfactant molecules interact with the protein, a value too low for reversed micellar incorporation of the protein in isooctane. These studies suggested that reversed micelles do not need to be involved in the actual transfer of the protein from the aqueous to the organic phase and protein solubilization in the organic phase is possible in the absence of reversed micelles. Based on these findings, a new mechanism has been proposed herein for protein extraction via the phase transfer method involving ionic surfactants. The central theme of this mechanism is the formation of an electrostatic complex between CMT and AOT at the aqueous/organic interface between AOT and CMT, thereby leading to the formation of a hydrophobic species that partitions into the organic phase. Consistent with this mechanism, the efficiency of extraction is dependent on the interfacial mass transfer, the concentrations of CMT and AOT in the aqueous and organic phases, respectively; the ionic strength of the aqueous phase; and the presence of various cosolvents. (c) 1994 John Wiley & Sons, Inc.     

Studies on the extraction and back-extraction of a recombinant cutinase in a reversed micellar extraction process

This work deals with the extraction and back-extraction of a recombinant cutinase using AOT reversed micelles in isooctane. The effect of pH, ionic strength, AOT concentration and temperature on the extraction and back-extraction of the cutinase was investigated. High extraction (97%) of the cutinase was achieved at pH 7.0 with a 50 mM Tris-HCl buffer solution containing 100 mM KCl, but a low activity was detected in the reversed micellar phase. At pH 9.0, cutinase was extracted (75%) to the reversed micelles with higher activity. Cutinase was recovered (50%) from a reversed micellar phase (100 mM AOT/isooctane) into a 50 mM Tris-HCl buffered solution at pH 9.0 with 100 mM KCl, and 20°C. Protein and cutinase activity global yields of 38 and 45%, respectively, were obtained for the global process, extraction and back-extraction steps, using low ionic strength, pH 9.0, 100 mM AOT and 20°C.Maria das Graças Carneiro da Cunha acknowledges a Ph.D. fellowship from Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) and Centro de Pesquisas Aggeu Magalhães, Brasil. This work was partly financed by the BRIDGE Programme (Contract BIOT-CT91-0274(DTEE)).     

Solubilizing water involved in protein extraction using reversed micelles

The extraction of protein using reversed micelles was investigated in relation to the amount of solubilizing water in the reversed micellar organic phase. The minimal concentration of amphiphilic molecule di-2-ethylhexyl sodium sulfosuccinate (C(20)H(37)O(7)Na) (AOT) required for 100% cytochrome c extraction was recognized. This critical AOT concentration increased with protein concentration in the aqueous phase. On this minimal AOT condition, the molar ratio of solubilizing water to extracted protein was found to be a constant of 3500 under C(KCI) = 1.0 x 10(2) mol . m(-3) in this system. This ratio means the hydrophillic surroundings required for extracting one protein molecule into the micellar organic phase under the suitable pH and salt concentration for the forward extraction. In this regard, AOT molecules seemed to take the part of water solubilizing agent in the reversed micellar extraction. This role of AOT is important to extract protein under the suitable pH and salt concentration. The amount of solubilizing water in the protein-containing system was larger than in the protein-free system. This difference shows that the water molecules accompany the extracted protein into the reversed micellar organic phase at constant ratio 2200 under C(KCI) = 1.0 x 10(2) mol . m(-3), i.e., accompanying water molecules per one extracted protein. The minimal AOT concentration increased with ionic strength. On this minimal AOT condition, the molar ratio of solubilizing water to extracted protein also increased with ionic strength, so that in higher ionic strength, more solubilizing water was required. Then more AOT was required to provide the hydrophillic surroundings for protein. The pH affected the minimal AOT concentration required for 100% protein extraction.     

Reverse micelles‐mediated transport of lipase in liquid emulsion membrane for downstream processing

This work deals with the downstream processing of lipase (EC 3.1.1.3, from Aspergillus niger) using liquid emulsion membrane (LEM) containing reverse micelles for the first time. The membrane phase consisted of surfactants [cetyltrimethylammonium bromide (CTAB) and Span 80] and cosolvents (isooctane and paraffin light oil). The various process parameters for the extraction of lipase from aqueous feed were optimized to maximize activity recovery and purification fold. The mechanism of lipase transport through LEM consisted of three steps namely solubilization of lipase in reverse micelles, transportation of reverse micelles loaded with lipase through the liquid membrane, and release of the lipase into internal aqueous phase. The results showed that the optimum conditions for activity recovery (78.6%) and purification (3.14‐fold) were feed phase ionic strength 0.10 M NaCl and pH 9.0, surfactants concentration (Span 80 0.18 M and CTAB 0.1 M), volume ratio of organic phase to internal aqueous phase 0.9, ratio of membrane emulsion to feed volume 1.0, internal aqueous phase concentration 1.0 M KCl and pH 7.0, stirring speed 450 rpm, and contact time 15 min. This work indicated the feasibility of LEM for the downstream processing of lipase. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

Protein refolding by reversed micelles utilizing solid-liquid extraction technique

This article reports that a reversed micellar solution is useful for refolding proteins directly from a solid source. The solubilization of denatured RNase A, which had been prepared by reprecipitation from the denaturant protein solution, into reversed micelles formulated with sodium di-2-ethylhexyl sulfosuccinate (AOT) has been investigated by a solid-liquid extraction system. This method is an alternative to the ordinary protein extraction in reversed micelles based on the liquid-liquid extraction. The solid-liquid extraction method was found to facilitate the solubilization of denatured proteins more efficiently in the reversed micellar media than the ordinary phase transfer method of liquid extraction. The refolding of denatured RNase A entrapped in reversed micelles was attained by adding a redox reagent (reduced and oxidized glutathion). Enzymatic activity of RNase A was gradually recovered with time in the reversed micelles. The denatured RNase A was completely refolded within 30 h. In addition, the efficiency of protein refolding was enhanced when reversed micelles were applied to denatured RNase A containing a higher protein concentration that, in the case of aqueous media, would lead to protein aggregation. The solid-liquid extraction technique using reversed micelles affords better scale-up advantages in the direct refolding process of insoluble protein aggregates.     

Forward and backward extraction rates of amino acid in reversed micellar extraction

The mass transfer characterization in reversed micellar extraction of amino acid phenylalanine (Phe) is presented. The mass transfer rates in forward extraction of Phe from aqueous KCl solutions (pH 1.4 – 2.3) to AOT/isooctane reversed micellar solutions and in backward extraction from the reversed micellar organic phase to KHCO₃/KOH buffer solutions (pH 9.0 – 11.0) were investigated using a stirred cell with a flat liquid–liquid interface. Both the forward and the backward extraction rates are controlled by the interfacial rate processes, i.e., the solubilization and the release processes. The solubilizing rate constants for the forward extraction of Phe increase with decreasing pH and initial Phe concentration and with increasing initial AOT concentration. On the other hand, the releasing rate constants for the backward extraction decrease with increasing initial AOT concentration and with decreasing ionic strength, but are little influenced by pH. The backward extraction rates are fairly slow compared to the forward extraction rates, and are accelerated by the addition of 2-methyl-2-propanol, similar to the extraction of protein lysozyme.     

Protein refolding in reversed micelles

A novel process has been developed which uses reversed micelles to isolate denatured protein molecules from each other and allows them to refold individually. These reversed micelles are aqueous phase droplets stabilized by the surfactant AOT and suspended in isooctane. By adjusting conditions such that only one protein molecule is present per reversed micelle, it was possible to achieve independent folding without encountering the problem of aggregation due to interactions with neighboring molecules. The feasibility of this process was demonstrated using bovine pancreatic ribonuclease A as a model system. It was shown that denatured and reduced ribonuclease can be transferred from a buffered solution containing guanidine hydrochloride into reversed micelles to a greater extent than native enzyme under the same conditions. The denaturant concentration can then be significantly reduced in the reversed micellar phase, while retaining most of the protein, by means of extractive contacting stages with a denaturant-free aqueous solution. Denatured and reduced ribonuclease will subsequently recover full activity inside reversed micelles within 24 h upon addition of a mixture of reduced and oxidized glutathione to reoxidize disulfide bonds. Extraction of this refolded enzyme from reversed micelles back into aqueous solution can be accomplished by contacting the reversed micelle phase with a high ionic strength (1.0M KCl) aqueous solution containing ethyl acetate.     

Important parameters affecting efficiency of protein refolding by reversed micelles

Refolding of denatured RNase A as a model of inclusion bodies was performed by reversed micelles formulated with sodium di-2-ethylhexyl sulfosuccinate (AOT) in isooctane. In the novel refolding process, a solid-liquid extraction was utilized as an alternative to the ordinary protein extraction by reversed micelles based on a liquid-liquid extraction. First, the effects of operational parameters such as concentration of AOT, W(o) (= [H(2)O]/[AOT]), and pH were examined on the solubilization of solid denatured proteins into a reversed micellar solution. The solubilization was facilitated by a high AOT concentration, a high W(o) value, and a high pH in water pools. These conditions are favorable for the dispersion of the solid protein aggregates in an organic solvent. Second, the renaturation of the denatured RNase A solubilized into the reversed micellar solution was conducted by addition of glutathione as a redox reagent. A complete renaturation of RNase A was accomplished by adjusting the composition of the redox reagent even at a high protein concentration in which protein aggregation would usually occur in aqueous media. In addition, the renaturation rates were improved by optimizing water content (W(o)) and the pH of water pools in reversed micelles. Finally, the recovery of renatured RNase A from the reversed micellar solution was performed by adding a polar organic solvent such as acetone into the reversed micellar solution. This precipitation method was effective for recovering proteins from reversed micellar media without any significant reduction in enzymatic activity.     

Partitioning behavior and enrichment of proteins with reversed micellar extraction: I. forward extraction of proteins from aqueous to reversed micellar phase

Protein extractions using aerosol OT (AOT)-isooctane reverse micelle solutions have been studied to explore the potential for separating and enriching proteins with the reversed micellar extraction. The effects of pH, ionic strength, and different cations of chlorides in a bulk aqueous phase and of AOT concentration in an organic phase on the partitioning of lysozyme and myoglobin and the solubilization of water are presented in detail. The extraction of lysozyme was affected by the concentration of potassium or barium but was almost independent of that of sodium or calcium, whose ionic diameter is smaller than that of potassium and barium. For the extraction of myoglobin, however, the effect of barium concentration was not appreciable. Lysozyme could be enriched into the reversed micellar phase up to 30 times the aqueous feed concentration. (c) 1993 John Wiley & Sons, Inc.     

Study of the factors affecting the extraction of soybean protein by reverse micelles

In this work, the forward and back extraction of soybean protein by reverse micelles was studied. The reverse micellar systems were formed by anionic surfactant sodium bis(2-ethyl hexyl) sulfosuccinate (AOT), isooctane and KCl solution. The effects of AOT concentration, aqueous pH, KCl concentration and phase volume ratio on the extraction efficiency of soybean protein were tested. Suitability of reverse micelles of AOT and Triton-X-100/AOT mixture in organic solvent toluene for soybean protein extraction was also investigated. The experimental results lead to complete forward extraction at the AOT concentration 120 mmol l⁻¹, aqueous pH 5.5 and KCl concentration 0.8 mol l⁻¹. The backward extraction with aqueous phase (pH 5.5) resulted in 100% extraction of soybean protein from the organic phase.     

Extraction and purification of a lectin from small black kidney bean (Phaseolus vulgaris) using a reversed micellar system

Lectin from crude extract of small black kidney bean (Phaseolus vulgaris) was successfully extracted using the reversed micellar extraction (RME). The effects of water content of organic phase (W_o), ionic strength, pH, Aerosol-OT (AOT) concentration and extraction time on the forward extraction and the pH and ionic strength in the backward extraction were studied to optimize the extraction efficiency and purification factor. Forward extraction of lectin was found to be maximum after 15 min of contact using 50 mM AOT in organic phase with W_o 27 and 10 mM citrate-phosphate buffer at pH 5.5 containing 100 mM NaCl in the aqueous phase. Lectin was backward extracted into a fresh aqueous phase using sodium-phosphate buffer (10 mM, pH 7.0) containing 500 mM KCl. The overall yield of the process was 53.28% for protein recovery and 8.2-fold for purification factor. The efficiency of the process was confirmed by gel electrophoresis analysis.     

The effects of pH and ionic strength on the partitioning of four proteins in reverse micelle systems

Four proteins with different physicochemical properties have been partitioned in reversed micelle systems: thaumatin, ribonuclease A, soybean trypsin inhibitor, and alpha-lactalbumin. The organic phase was formed by sodium salt (AOT) in isooctane, and the aqueous phase contained KCl, KBr, MgCl(2), or NaCl. Aqueous phase pH was varied between 2 and 13 and ionic strength from 0.1 to 1.0 M. Small changes in pH [around the isoelecric point (pl)] were found to influence the solubilization of ribonuclease A and trypsin inhibitor, but for thaumatin the pH change necessary to affect partition was much greater as a consequence of the difference in net charge (titration curves) of these protein molecules as pH changes. The type of ions present in the system was also a determining factor for partition; the larger ions (K(+)) produced more electrostatic screening and hence less protein solubilization than the smaller ions (Na(+)). With changes in ionic strength surface hydrophobicity was a dominant factor affecting solubilization of thaumatin in NaCl-containing systems at high pH. Charge distribution and hydrophobicity are thought to be important parameters when partitioning the protein alpha-lactalbumin. (c) 1994 John Wiley & Sons, Inc.     

Downstream processing of soy hull peroxidase employing reverse micellar extraction

Phase transfer studies were conducted to evaluate the solubilization of soy hull peroxidase (SHP) in reverse micelles formed in isooctane/butanol/hexanol using the cationic surfactant cetyltrimethylammonium bromide (CTAB). The effect of various parameters such as pH, ionic strength, surfactant concentration of the initial aqueous phase for forward extraction and buffer pH, type and concentration of salt, concentration of isopropyl alcohol and volume ratio for back extraction was studied to improve the efficiency of reverse micellar extraction. The active SHP was recovered after a complete cycle of forward and back extraction. A forward extraction efficiency of 100%, back extraction efficiency of 36%, overall activity recovery of 90% and purification fold of 4.72 were obtained under optimised conditions. Anionic surfactant sodium bis (2-ethylhexyl) sulfosuccinate (AOT) did not yield good results under the conditions studied. The phase transfer of soy hull peroxidase was found to be controlled by electrostatic and hydrophobic interactions during forward and back extraction respectively.     

Protein extraction using the sodium bis(2-ethylhexyl) phosphate (NaDEHP) reverse micellar system

The reverse micellar system of sodium bis(2-ethylhexyl) phosphate (NaDEHP)/isooctane/brine was used for liquid-liquid extraction of proteins. We investigated the solubilization of cytochrome-c and alpha-chymotrypsin into the NaDEHP reverse micellar phase by varying the pH and NaCl concentration in the aqueous phase. At neutral pH and relatively low ionic strength, the proteins are extracted into the micellar phase with high yield. By contacting the micellar phase with a divalent cation (e.g., Ca(2+)) aqueous solution, the reverse micelles are destabilized and release the protein molecules back into an aqueous solution for recovery. This method separates the proteins from the surfactant with very high overall efficiencies. (c) 1996 John Wiley & Sons, Inc.     

Solubilization, partial purification and photolabeling of the integral membrane protein lysophospholipid:acyl-CoA acyltransferase (LAT).

In the present study, we defined experimental conditions that allowed the extraction of the integral membrane protein lysophospholipid:acyl-CoA acyltransferase (LAT, EC 2.3.1.23) from membranes while maintaining the full enzyme activity using the nonionic detergent n-octyl glucopyranoside (OGP) and solutions of high ionic strength. We found that the optimal OGP concentration depended on the ionic strength of the solubilization buffer. Fluorescence measurements with 1,6-diphenyl-1,3,5-hexatriene indicated that the critical micellar concentration (CMC) of OGP decreased with increasing salt concentrations. Analogous studies revealed that the zwitterionic detergent Chaps was ineffective in extracting LAT from membranes in the absence of salt, whereas its solubilization efficiency increased with increasing salt concentrations. Detailed lipid analysis of the different protein/lipid/detergent mixed micelles showed that the protein/lipid/OGP mixed micelles were relatively enriched with sphingomyelin (SPM) compared to protein/lipid/Chaps mixed micelles, indicating that the differences in the solubilization efficiency may be due to the ability to extract more SPM from membranes. When the protein/lipid/OGP mixed micelles were dissociated into protein/detergent and lipid/detergent complexes by the addition of increasing Chaps concentrations, one-tenth of the LAT enzyme activity was preserved making the enzyme accessible to protein purification. Analysis by native PAGE revealed that in the presence of excess Chaps a high molecular mass protein complex migrated into the gel which could be photolabeled by 125I-labelled-18-(4'-azido-2'-hydroxybenzoylamino)-oleyl-CoA. This fatty acid analogue has been shown to be a competitive inhibitor of LAT enzyme activity in the dark, and an irreversible inhibitor after photolysis. Therefore, this protein complex is assumed to contain the LAT enzyme.     

Mechanism of protein extraction from the solid state by water-in-oil microemulsions

The extraction of solid-phase alpha-chymotrypsin, bovine serum albumin (BSA), and lysozyme by water-in-oil microemulsion (w/o-ME) solution containing Aerosol-OT (AOT) was thoroughly examined as a means to maximize protein solubilization in organic solvent media. Protein extraction occurred simultaneously with the adsorption of water and AOT by the solid protein. Water and AOT were desorbed at nearly equal rates, suggesting that both materials were desorbed together as micreomulsions. The solubilization of protein increased linearly with the ratio of solid protein to extractant solution except at a high value of the ratio, where most protein-containing microemulsions were desorbed. Based on our results, a mechanistic model was developed to describe the solid-phase extraction procedure. First, microemulsions are desorbed from solution by the solid protein, resulting in the formation of a solid protein-AOT-water aggregate. Second, when a protein in the solid phase binds to a sufficient number of microemulsions, the resulting aggregate's increased hydrophobicity drives its solubilization into lipophilic solvent. Third, through the exchange of materials between the solubilized precipitate and the remaining microemulsions, protein-containing w/o-MEs are formed. The presence of adsorption is further indicated by an isotherm existing between the water, AOT, and protein content of the resulting solid phase for each protein. The driving force behind adsorption is either AOT-protein interactions or the protein's affinity for microemulsion-encapsulated water, depending on the properties of the protein and the size of the microemulsions, in agreement with the model of P. L. Luisi [Chimia, 44: 270-282 (1990)]. The second step of our model is mass transfer limited for the extraction of solid alpha-chymotrypsin and BSA. The extraction of solid lysozyme was limited by the occurrence of an irreversible precipitation process. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 53: 583-593, 1997.     

Affinity extraction of proteins with a reversed micellar system composed of Cibacron Blue-modified lecithin

Crude soybean lecithin was used as a novel surfactant to form reversed micelles in n-hexane. Cibacron Blue F-3GA (CB) was directly immobilized to the reversed micelles by a two-phase reaction. The reversed micellar system without CB showed low solubilizing capacity for low molecular weight proteins, lysozyme, and cytochrome c due to the weak electrostatic interactions. The introduction of CB significantly increased the solubilization of lysozyme because of its affinity binding to CB but showed no effect on the solubilization of cytochrome c since it did not bind to CB. Although bovine serum albumin had an affinity for CB, it was not extracted to the reversed micelles containing CB because its high molecular weight resulted in a significant steric hindrance effect. Thus the reversed micellar system had a high selectivity resulting from both biospecific and steric hindrance effects. The extraction yield of lysozyme decreased significantly with increasing ionic strength. Therefore, the back extraction of lysozyme was carried out using a stripping solution with an ionic strength of 0.865 mol/L. The overall recovery yield of lysozyme after back extraction could be increased to 87% by stripping for 2 h. The recovered lysozyme exhibited an activity equivalent to native lysozyme, and its secondary structure was also unchanged.     

Extraction of bovine serum albumin using nanoparticulate reverse micelles

The extraction of a relatively large molecular weight protein, bovine serum albumin (BSA), using nano-sized reverse micelles of nonionic surfactant polyoxyethylene p-t-octylphenol (Triton-X-100) is attempted for the first time. Suitability of reverse micelles of anionic surfactant sodium bis (2-ethyl hexyl) sulfosuccinate (AOT) and Triton-X-100/AOT mixture in organic solvent toluene for BSA extraction is also investigated. Although, the size of the Triton-X-100 reverse micelle in toluene is large enough to host BSA molecule in the hydraulic core, the overall extraction efficiency is found to be low, which may be due to lack of strong driving force. AOT/toluene system resulted in complete forward extraction at aqueous pH 5.5 and a surfactant concentration of 160 mM. The back extraction with aqueous phase (pH 5.5) resulted in 100% extraction of BSA from the organic phase. The addition of Triton-X-100 to AOT reduced the extraction efficiency of AOT reverse micelles, which may be attributed to reduced hydrophobic interaction. The circular dichroism (CD) spectrum of BSA extracted using AOT/toluene reverse micelles indicated the structural stability of the protein extracted.     

Mechanisms of amino acid partitioning in cationic reversed micelles

The aim of this work is to discuss the mechanisms involved in amino acidsolubilization in cationic reversed micelles. A simple mechanism was assumedin which the amino acid solubilization is mediated by an ion-exchangeprocess between the amino acid and the surfactant counter ion neglecting theeffect of the reversed micellar structure. Based on this mechanism a simplemodel to predict equilibrium was developed and applied to the solubilizationof amino acids with different structures. It was found that solubilizationof hydrophilic and slightly hydrophobic amino acids can be described by anion-exchange mechanism and the amino acid equilibrium concentration can bedetermined for different experimental conditions using this model. However,solubilization of hydrophobic amino acids can not be described by a simpleion-exchange model. In this case hydrophobic contributions play an importantrole in amino acid solubilization and must be considered in the overallsolubilization process. This hydrophobic contribution was evaluated bydetermination of an interfacial partition coefficient. The overall aminoacid extraction was determined using distribution coefficients of all theamino acid forms and considering their dependence on ionic strength.     

Process optimization for reverse micellar extraction of stem bromelain with a focus on back extraction

In the current study, reverse micellar extraction (RME) for the purification of stem bromelain was successfully achieved using the sodium bis(2‐ethylhexyl) sulfosuccinate (AOT)/isooctane system. A maximum forward extraction efficiency of 58.0% was obtained at 100 mM AOT concentration, aqueous phase pH of 8.0 and 0.2 M NaCl. Back extraction studies on altering stripping phase pH and KCl concentration, addition of counter‐ion and iso‐propyl alcohol (IPA) and mechanical agitation with glass beads indicated that IPA addition and agitation with glass beads have significant effects on extraction efficiency. The protein extraction was higher (51.9%) in case of the IPA (10% v/v) added system during back extraction as compared to a cetyltrimethylammonium bromide (100 mM) added system (9.42%). The central composite design technique was used to optimize the back extraction conditions further. Concentration of IPA, amount of glass beads, mixing time, and agitation speed (in rpm) were the variables selected. IPA concentration of 8.5% (v/v), glass bead concentration of 0.6 (w/v), and mixing time of 45 min at 400 rpm resulted in higher back extraction efficiency of 45.6% and activity recovery of 88.8% with purification of 3.04‐fold. The study indicated that mechanical agitation using glass beads could be used for destabilizing the reverse micelles and release of bromelain back into the fresh aqueous phase. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:845–855, 2014