Preparation and antibacterial activity of chitosan nanoparticles

Chitosan nanoparticles, such as those prepared in this study, may exhibit potential antibacterial activity as their unique character. The purpose of this study was to evaluate the in vitro antibacterial activity of chitosan nanoparticles and copper-loaded nanoparticles against various microorganisms. Chitosan nanoparticles were prepared based on the ionic gelation of chitosan with tripolyphosphate anions. Copper ions were adsorbed onto the chitosan nanoparticles mainly by ion-exchange resins and surface chelation to form copper-loaded nanoparticles. The physicochemical properties of the nanoparticles were determined by size and zeta potential analysis, atomic force microscopy (AFM), FTIR analysis, and XRD pattern. The antibacterial activity of chitosan nanoparticles and copper-loaded nanoparticles against E. coli, S. choleraesuis, S. typhimurium, and S. aureus was evaluated by calculation of minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). Results show that chitosan nanoparticles and copper-loaded nanoparticles could inhibit the growth of various bacteria tested. Their MIC values were less than 0.25 microg/mL, and the MBC values of nanoparticles reached 1 microg/mL. AFM revealed that the exposure of S. choleraesuis to the chitosan nanoparticles led to the disruption of cell membranes and the leakage of cytoplasm.     

Studies on the antibacterial activities and mechanisms of chitosan obtained from cuticles of housefly larvae

Chitosan was obtained from cuticles of the housefly (Musca domestica) larvae. Antibacterial activities of different Mw chitosans were examined against six bacteria. Antibacterial mechanisms of chitosan were investigated by measuring permeability of bacterial cell membranes and observing integrity of bacterial cells. Results show that the antibacterial activity of chitosan decreased with increase in Mw. Chitosan showed higher antibacterial activity at low pH. Ca2+ and Mg2+ could markedly reduce the antibacterial activity of chitosan. The minimum inhibitory concentrations of chitosans ranged from 0.03% - 0.25% and varied with the type of bacteria and Mw of chitosan. Chitosan could cause leakage of cell contents of the bacteria and disrupt the cell wall.     

Preparation and Characterization of Chitosan Hybrid Membranes Containing Polyethylacrylate and Polybutylacrylate

Chitosan hybrid membranes were prepared in the presence of polyethylacrylate and polybutylacrylate and characterized by measuring stress, strain, Young’s modulus, swelling behavior and antibacterial properties against gram-negative and gram-positive bacteria using IR spectroscopy and scanning electron microscopy (SEM). The results show that the mechanical properties of the hybrid membranes were enhanced using polybutylacrylate. SEM images showed homogeneity of the prepared membranes. The swelling degree was of the order chitosan > chitosan/polyethylacrylate > chitosan/polybutylacrylate. Antibacterial properties of the hybrid membranes with polybutylacrylate and polyethylacrylate were higher than those of chitosan membranes without any additives.     

Preparation of chitosan-nylon-6 blended membranes containing silver ions as antibacterial materials

Chitosan-nylon-6 blended membranes were prepared by combining solvent evaporation and a phase inversion technique, and then used to chelate silver ions. Gram-positive bacteria (Staphylococcus aureus) and Gram-negative bacteria (Escherichia coli) were used to study the antibacterial properties of the membranes. Fourier-transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) indicated hydrogen-bond interactions between chitosan and nylon-6. From the scanning electron microscopy (SEM) pictures, it was observed that with the increase of nylon-6 content, the blended membrane gradually became a material with porous morphology. After chelating silver ions, the tensile strength of the membranes increased. The antibacterial activity with the variation of chitosan content, the pH value and the concentration of the silver nitrate solution used to prepare Ag(+)-loaded membranes were investigated systematically. The results indicated that the chitosan-nylon-6 blended membranes with Ag(+) were antibacterial to both Gram-positive bacteria and Gram-negative bacteria. The antibacterial activity improved with the increased chitosan content due to the larger amount of silver ions loaded. The antibacterial property of the chitosan-nylon-6 blended membranes could be primarily attributed to the content of chitosan and silver ions as well as the surface morphology of the membranes.     

Preparation and characterization on mechanical and antibacterial properties of chitsoan/cellulose blends

Polysaccharides-based membranes of chitosan and cellulose blends were prepared using trifluoroacetic acid as a co-solvent. Morphology and mechanical property of prepared membranes were studied by Instron and dynamic mechanical thermal analysis. The mechanical and dynamic mechanical thermal properties of the cellulose/chitosan blends appear to be dominated by cellulose, suggests that cellulose/chitosan blends were not well miscible. It is believed that the intermolecular hydrogen bonding of cellulose is supposed to be break down to form cellulose–chitosan hydrogen bonding; however, the intra-molecular and intra-strand hydrogen bonds hold the network flat. The reduced water vapor transpiration rate through the chitosan/cellulose membranes indicates that the membranes used as a wound dressing may prevent wound from excessive dehydration. The chitosan/cellulose blend membranes demonstrate effective antimicrobial capability against Escherichia coli and Staphylococcus aureus, as examined by the antimicrobial test. These results indicate that the chitosan/cellulose blend membranes may be suitable to be used as a wound dressing with antibacterial properties.     

The effect of chitosan on the in vitro biological performance of chitosan-poly(butylene succinate) blends

Chitosan blends with synthetic biodegradable polymers have been proposed for various biomedical applications due to their versatile mechanical properties and easier processing. However, details regarding the main surface characteristics that may benefit from the blending of these two types of materials are still missing. Hence, this work aims at investigating the surface properties of chitosan-based blends, illustrating the way these properties determine the material-proteins interactions and ultimately the behavior of osteoblast-like cells. The surface characteristics of modified and nonmodified blends were assessed using complimentary techniques such as optical microscopy, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR-ATR), X-ray photoelectron spectroscopy (XPS), contact angle measurements and surface energy calculations. The adsorption of human serum albumin (HSA) and human plasma fibronectin (HFN) onto the different surfaces was quantified by association of an indirect method with a colorimetric assay. It was found that the presence of chitosan on the surface promoted the adsorption of proteins. Moreover, a preferential adsorption of albumin over fibronectin was registered. The in vitro biological performance of the studied materials was further investigated by a direct contact assay with an osteoblastic-like cell line (SaOs-2). A synergistic effect of the two components of the blend was observed. While the synthetic polyester promoted the adhesion of SaOs-2, the presence of chitosan significantly enhanced the osteoblastic activity of these cells. This work further confirmed the interest in designing polymeric blends with natural polymers as a successful strategy to enhance the biological performance of a biomaterial.     

Wet chemical synthesis of chitosan hydrogel–hydroxyapatite composite membranes for tissue engineering applications

Chitosan, a deacetylated derivative of chitin is a commonly studied biomaterial for tissue-engineering applications due to its biocompatibility, biodegradability, low toxicity, antibacterial activity, wound healing ability and haemostatic properties. However, chitosan has poor mechanical strength due to which its applications in orthopedics are limited. Hydroxyapatite (HAp) is a natural inorganic component of bone and teeth and has mechanical strength and osteoconductive property. In this work, HAp was deposited on the surface of chitosan hydrogel membranes by a wet chemical synthesis method by alternatively soaking the membranes in CaCl₂ (pH 7.4) and Na₂HPO₄ solutions for different time intervals. These chitosan hydrogel–HAp membranes were characterized using SEM, AFM, EDS, FT-IR and XRD analyses. MTT assay was done to evaluate the biocompatibility of these membranes using MG-63 osteosarcoma cells. The biocompatibility studies suggest that chitosan hydrogel–HAp composite membranes can be useful for tissue-engineering applications.     

Novel starch/chitosan blending membrane: Antibacterial,permeable and mechanical properties

Antibacterial membranes were prepared from a mixture of hydrolyzed starch and chitosan. Glycerin was incorporated in the membranes to as plasticizer agent. The effects of component ratio on the mechanical and permeable properties of the prepared membranes were investigated. The elongation-at-break and water vapor transmission rate of starch/chitosan blending membranes were largely improved compared with each single component due to the interaction formed between the hydroxyl groups of starch and the amino ones of chitosan, which was confirmed by FT-IR characterizations. With the help of optical microscope, the influence of component ratio on the morphologies of starch/chitosan membranes was systematically investigated. It comes to a conclusion that extreme low or high starch content will cause an asymmetric membrane surface. To prove the antibacterial activity of obtained membranes, Escherichia coli (E. coli) was chosen as the target bacteria via optical density method. The resulted starch/chitosan membranes exhibited an outstanding antibacterial activity against E. coli.     

壳聚糖/ 魔芋葡甘露聚糖复合膜体内外促创面愈合研究

目的:制备壳聚糖/魔芋葡甘露聚糖复合膜,研究其促创面愈合作用。方法:壳聚糖溶液和魔芋葡甘露聚糖溶液混合后冷冻干燥制成复合膜。扫描电镜观察膜的形态和孔径,并研究比较膜的吸水率,水蒸气透过率,拉伸强度,断裂伸长率和体外降解率。建立大鼠皮肤损伤模型,敷以复合膜治疗,比较创面愈合率,观察创面组织染色结果,评价复合膜的促创面愈合作用。结果:壳聚糖/魔芋葡甘露聚糖复合膜具有三维网状结构,壳聚糖复合魔芋葡甘露聚糖后,膜的吸水率、拉伸强度和断裂伸长率提高,体外降解加速,水蒸气透过率改善。愈合实验表明壳聚糖/魔芋葡甘露聚糖膜具有促进创面愈合作用。结论:壳聚糖/魔芋葡甘露聚糖复合膜制备工艺简单,能有效促进创面愈合,具有成为创伤敷料的潜力。     

Investigation of PLLA/PCL Blends and Paclitaxel Release Profiles

Blends of poly (l-lactide) (PLLA) and poly (ε-caprolactone) (PCL) with and without paclitaxel were prepared via solution casting. DSC analysis as well as SEM analysis of the PLLA/PCL blend solution cast films showed that these blends are all phase separated.%PLLA crystallinity was found to increase with increasing PCL content (up till 15 wt.%). The PCL phase is found to homogeneously disperse in the PLLA matrix as spherical domains where the pore diameters of the PCL domains significantly increased with increasing PCL content. The degradation profiles matched with the slower degrading component PCL rather than PLLA and also increasing PCL content of the blends increased the degradation rate relatively. The increased crystallinity of the PLLA phase with increasing PCL contents confirmed that the degradation occurred through PCL phase. Cell proliferation on PLLA/PCL blends showed that all these blends were suitable for the support of cellular growth. Apoptosis assay with the paclitaxel-loaded PLLA/PCL blends showed an increase in cell death throughout 7 days of incubation where the cell death was increased with increasing PCL contents. This was attributed to the faster release of paclitaxel which was at least partially affected by the faster degradation rate at increasing PCL contents. The paclitaxel release was shown to be degradation controlled in the initial stages followed by a faster diffusion-controlled release in the later stages. These polymer blends were found to be very suitable paclitaxel release agents for which the paclitaxel release times can be altered with the composition of the blend and the film thickness.     

Poly(N-isopropylacrylamide) surface-grafted chitosan membranes as a new substrate for cell sheet engineering and manipulation

The immobilization of poly(N-isopropylacrylamide) (PNIPAAm) on chitosan membranes was performed in order to render membranes with thermo-responsive surface properties. The aim was to create membranes suitable for cell culture and in which confluent cell sheets can be recovered by simply lowering the temperature. The chitosan membranes were immersed in a solution of the monomer that was polymerized via radical initiation. The composition of the polymerization reaction solvent, which was a mixture of a chitosan non-solvent (isopropanol) and a solvent (water), provided a tight control over the chitosan membranes swelling capability. The different swelling ratio, obtained at different solvent composition of the reaction mixture, drives simultaneously the monomer solubility and diffusion into the polymeric matrix, the polymerization reaction rate, as well as the eventual chain transfer to the side substituents of the pyranosyl groups of chitosan. A combined analysis of the modified membranes chemistry by proton nuclear magnetic resonance ((1)H-NMR), Fourier transform spectroscopy with attenuated total reflection (FTIR-ATR) and X-ray photoelectron spectroscopy (XPS) showed that it was possible to control the chitosan modification yield and depth in the solvent composition range between 75% and 100% of isopropanol. Plasma treatment was also applied to the original chitosan membranes in order to improve cell adhesion and proliferation. Chitosan membranes, which had been previously subjected to oxygen plasma treatment, were then modified by means of the previously described methodology. A human fetal lung fibroblast cell line was cultured until confluence on the plasma-treated thermo-responsive chitosan membranes and cell sheets were harvested lowering the temperature.     

Chitosan�CEDTA New Combination is a Promising Candidate for Treatment of Bacterial and Fungal Infections

Chitosan is an attractive preparation widely used as a pharmaceutical excipient. This study aimed to evaluate the antimicrobial activities of chitosan derivatives, EDTA, and the newly developed chitosan-EDTA combination against Gram-negative and Gram-positive bacteria as well as Candida albicans. Antimicrobial activity was studied. Both minimal Inhibitory Concentrations (MIC) and minimal biocidal concentrations (MBC) were determined. Chitosan acetic acid recorded lower MIC values against Enterococcus faecalis, Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans than those exhibited by EDTA. EDTA failed to have inhibitory activity against Enterococcus faecalis as well as MBC against any of the studied microorganisms. Chitosan acetic acid's MBC were recorded to all examined species. Checkerboard assay results indicated a synergistic antimicrobial activity of the new combination against Staphylococcus aureus and an additive effect against other microorganisms. Moreover, a short microbial exposure to chitosan-EDTA (20-30 min) caused complete eradication. Due to the continuous emergence of resistant strains, there is an urgent need to discover new antimicrobial agents. Our findings suggest the use of chitosan as an enhancing agent with antibacterial and antifungal properties in combination with EDTA in pharmaceutical preparations.     

Physical, mechanical, and antibacterial properties of chitosan/PEO blend films

Films formed by blending of two polymers usually have modified physical and mechanical properties compared to films made of the individual components. Our preliminary studies indicated that incorporation of chitosan in polyethylene oxide (PEO) films may provide additional functionality to the PEO films and may decrease their tendency to spherulitic crystallization. The objective of this study was to determine the correlation between chitosan/PEO weight ratio and the physical, mechanical, and antibacterial properties of corresponding films. Films with chitosan/PEO weight ratios from 100/0 to 50/50 in 10% increments were characterized by measuring thickness, puncture strength (PS), tensile strength (TS), elongation at break (%E), water vapor permeability (WVP), and water solubility (WS). Additionally, the films were examined by polarized microscopy, wide-angle X-ray diffraction (WAXD), and Fourier transform infrared (FTIR) spectroscopy, and their antibacterial properties were tested against Escherichia coli. The chitosan fraction contributes to antimicrobial effect of the films, decreases tendency to spherulitic crystallization of PEO, and enhances puncture and tensile strength of the films, while addition of the PEO results in thinner films with lower water vapor permeability. Films with 90/10 blend ratio of chitosan/PEO showed the most satisfactory PS, TS, %E, and antibacterial properties of all tested ratios.     

Synthesis of chitosan–polycaprolactone blend for control delivery of ofloxacin drug

In the present research work chitosan has been blended with different amounts of polycaprolactone (PCL) (80:20, 75:25, 60:40 and 50:50) for using them for control delivery of ofloxacin. The blends were characterized by Fourier transmission infra red spectroscopy (FTIR), UV–visible spectroscopy (UV), scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis. From the FTIR spectra the various groups present in chitosan and PCL blend were monitored. The homogeneity, morphology and crystallinity of the blends were ascertained from SEM and XRD data, respectively. The swelling studies have been measured at different drug loading. The kinetics of the drug delivery system has been systematically studied. Drug release kinetics was analyzed by plotting the cumulative release data vs. time by fitting to an exponential equation which indicated the non-Fickian type of kinetics. The drug release was investigated at different pH medium and it was found that the drug release depends upon the pH medium as well as the nature of matrix.     

Obtaining and study of monosaccharide derivatives of low-molecular-weight chitosan

The possibility of obtaining monosaccharide derivatives of low-molecular-weight chitosan with the use of the Maillard reaction was studied. Chitosan derivatives (molecular weight, 24 and 5 kDa) obtained with glucosamine, N-acetyl galactosamine, galactose, and mannose with a substitution degree of 4–14% and a yield of 60–80% were obtained. Some physicochemical and biological properties of these derivatives were studied. We showed that monosaccharide derivatives of low-molecular-weight chitosan exhibited antibacterial activity. Chitosan at a concentration of 0.01% caused 100% death of bacteria B. subtilis and E. coli. The strongest antibacterial effect was exhibited by 24-kDa derivatives: only 0.02–0.08% of cells survived. These derivatives were two orders of magnitude more effective than the 5-kDa chitosan modified with galactose.     

Probing the modes of antibacterial activity of chitosan. Effects of pH and molecular weight on chitosan interactions with membrane lipids in Langmuir films

Chitosan, a cationic biopolymer derived from chitin, has been described as having antibacterial activity. The modes of this activity, however, have not been established. One mode proposed is that chitosan perturbs bacterial cell membranes. To validate this proposal, in this study we investigated chitosan interactions with lipids in Langmuir monolayers as model membranes. The interactions were assessed by monitoring differences in the shape of the compression isotherms measured in the absence and presence of chitosan in the subphase (acetate buffer). To appraise the contribution of electrostatic interactions versus hydrogen bonding and hydrophobic interactions, three membrane lipids differing in charge were studied-anionic dipalmitoylphosphatidylglycerol (DPPG), zwitterionic dipalmitoylphosphatidylcholine (DPPC), and neutral cholesterol-and the pH of the subphase was varied between 3.5 and 6.0. In addition, the impact of the molecular weight of chitosan on the interactions was assessed at pH 3.5. It was found that while chitosan had a negligible effect on DPPC monolayers over the pH range studied, it distinctly affected DPPG and cholesterol monolayers. The effect on DPPG was found to decrease with increasing pH, that at pH 3.5 being ascribed to the charge-mediating action of chitosan on the local ionic environment and that at higher pHs to the intercalation of chitosan to the monolayers. Practically independent of pH, the effect of chitosan on cholesterol was accounted for by the formation of cholesterol-chitosan hydrogen bonds. Chitosan of lower molecular weight facilitated the interactions with all the three lipids studied. The results obtained may be helpful in identifying the mode of antibacterial activity of chitosan versus other modes that involve the disturbance of cell life cycles.     

The Inclusion of Chitosan in Poly-ε-caprolactone Nanoparticles: Impact on the Delivery System Characteristics and on the Adsorbed Ovalbumin Secondary Structure

This report extensively explores the benefits of including chitosan into poly-ε-caprolactone (PCL) nanoparticles (NPs) to obtain an improved protein/antigen delivery system. Blend NPs (PCL/chitosan NPs) showed improved protein adsorption efficacy (84%) in low shear stress and aqueous environment, suggesting that a synergistic effect between PCL hydrophobic nature and the positive charges of chitosan present at the particle surface was responsible for protein interaction. Additionally, thermal analysis suggested the blend NPs were more stable than the isolated polymers and cytotoxicity assays in a primary cell culture revealed chitosan inclusion in PCL NPs reduced the toxicity of the delivery system. A quantitative 6-month stability study showed that the inclusion of chitosan in PCL NPs did not induce a change in adsorbed ovalbumin (OVA) secondary structure characterized by the increase in the unordered conformation (random coil), as it was observed for OVA adsorbed to chitosan NPs. Additionally, the slight conformational changes occurred, are not expected to compromise ovalbumin secondary structure and activity, during a 6-month storage even at high temperatures (45°C). In simulated biological fluids, PCL/chitosan NPs showed an advantageous release profile for oral delivery. Overall, the combination of PCL and chitosan characteristics provide PCL/chitosan NPs valuable features particularly important to the development of vaccines for developing countries, where it is difficult to ensure cold chain transportation and non-parenteral formulations would be preferred.     

羧甲基壳聚糖膜对皮肤成纤维细胞相容性研究

通过玻璃流延法制备不同分子质量的壳聚糖及羧甲基壳聚糖膜,以体外培养的人皮肤成纤维细胞作为对象,利用膜的浸渍液培养及膜表面直接培养法研究比较了两种多糖膜的细胞相容性.实验发现两种多糖膜的浸渍液对细胞均无毒性效应,生物安全性是小分子质量膜好于大分子质量膜,羧甲基壳聚糖膜好于壳聚糖膜.皮肤成纤维细胞在壳聚糖膜上的生长受到抑制,生长一段时间后细胞有聚集和脱落现象,而羧甲基壳聚糖膜上细胞能很好地贴附、生长,没有聚集和脱落现象.结果表明羧甲基壳聚糖膜具有比壳聚糖膜更优越的细胞相容性.     

Enhanced microbial safety of channel catfish (Ictalurus punctatus) fillet using recently invented medium molecular weight water-soluble chitosan coating

Chitosan with higher molecular weight exhibited higher antimicrobial efficacy against foodborne pathogens. However, the poor water solubility of higher or medium molecular weight chitosan limits its applications. To overcome the challenge, our research team searched for simple preparation procedure for fast-dissolving medium molecular weight chitosan in water. Throughout the process, we were able to obtain a higher concentration of medium molecular weight water-soluble (MMWWS) chitosan (400 kDa). The MMWWS chitosan showed physicochemical properties that are suitable for edible coating. Antibacterial activities of 400-kDa chitosan coating prepared in acetic acid (1% v/v) or aspartic acid (1% or 3% w/v) were examined. The surface of catfish cubes was inoculated with six foodborne pathogens and then coated with chitosan solutions. The survival of each pathogen was evaluated during shelf life storage. Compared with the control, 3% w/v chitosan coating in aspartic acid solution exhibited the most effective antibacterial activities among other coating treatments, completely inhibiting Vibrio parahaemolyticus on the surface of catfish. The study suggested that chitosan dissolved in aspartic acid has the potential for use as an alternative antimicrobial coating for catfish fillet.     

Chitosan pyrolysis and adsorption properties of chitosan and its carbonizate

Chitosan was characterized by Fourier transform infrared spectroscopy (FTIR), ¹³C-nuclear magnetic resonance (NMR), X-ray diffraction (XRD), and elemental analysis (EA). The thin chitosan films obtained by the casting method were heated in vacuum from room temperature to 600 °C. The progress of thermal degradation and carbonization process was monitored by FTIR spectroscopy in a vacuum cell, which allows the elimination of the influence of atmospheric humidity on the chitosan and carbonizate properties. The adsorption of water on the degassed chitosan and its carbonizate as well the oxidation process was also investigated by FTIR spectroscopy. The surface morphology of initial chitosan and obtained carbonaceous material was observed using atomic force microscopy (AFM). Detailed characterization of raw material and carbonization conditions is necessary for tailoring reproducible adsorbent properties.