Engineering of functional supramacromolecular complexes of proteins (enzymes) using reversed micelles as matrix microreactors.

The size of the inner water cavity of reversed micelles formed in a triple system 'water-surfactant-organic solvent' can be widely varied by changing the degree of surfactant hydration. This gives grounds to use reversed micelles as matrix microreactors for the design of supramolecular complexes of proteins. Using ultracentrifugation analysis, it has been demonstrated that the oligomeric composition of various enzymes (ketoglutarate dehydrogenase, alkaline phosphatase, lactic dehydrogenase, glyceraldehyde-3-phosphate dehydrogenase) solubilized in reversed micelles of Aerosol OT [sodium bis(2-ethylehexyl)sulfosuccinate] in octane changes upon variation of the degree of hydration. An oligomeric complex forms under conditions when the radius of the micelle inner cavity is big enough to incorporate this complex as a whole. At lower degrees of hydration the micelles 'uncouple' such complexes to their components. The catalytic properties of various oligomeric complexes have been studied. Possibilities of using reversed micelles for the separation of subunits of oligomeric enzymes under non-denaturating conditions have been demonstrated. In particular, the isolated subunits of alkaline phosphatase, lactic dehydrogenase and glyceraldehyde-3-phosphate have been found to be active in Aerosol OT reversed micelles. The dependences of the catalytic activity of oligomeric enzymes represent saw-like curves. The maxima of the catalytic activity observed at these curves relate to the functioning of various oligomeric forms of an enzyme. The radii of the micelle inner cavity under conditions when these maxima are observed correlate with the linear dimensions of the enzyme oligomeric forms. Correlation of the position of a maximum with the shape of an oligomeric complex is discussed.     

Development of a highly sensitive bacteria detection assay using fluorescent pH-responsive polymeric micelles

The detection and control of bacteria is extremely important in the safety of food products and health systems. The conventional microbiological methods based on culture enrichment techniques and plating procedures are highly sensitive and selective for bacterial detection but are expensive, cumbersome and time-consuming. Here we report the development of a simple and sensitive bioassay to detect Escherichia coli (E. coli) bacteria by using self assembled pH-responsive polymeric micelles that have been bioconjugated to anti-E. coli (capturing agent). Poly(ethylene glycol-b-trimethylsilyl methacrylate), containing silicon moieties that can be cleaved under mildly acidic conditions, was synthesized and self-assembled into micelles, that were loaded with a fluorescent dye (1-methylpyrene). The polymer silicon protecting groups are used as a tool to remotely activate the dye release by means of pH. The high sensitivity of the newly developed bioassay, which is capable of detecting 15 bacteria per milliliter of solution, is due to an amplification effect generated by the optical signal of millions of fluorophores released from a single micelle upon attachment to a bacterium. Fluorescence probing involves the measurements of changes in the emission spectra, through the disappearance of the excimer band, which only occurs when the dye molecules are trapped within the polymeric micelles.     

Activity of lipoxygenase incorporated into reversed micelles of aerosol OT in octane

Soybean lipoxygenase (EC 1.13.11.12) incorporated into the reversed micelles of aerosol OT in octane has been studied for its catalytic properties. The enzyme is shown to preserve up to 10% activity as compared with the activity in the aqueous solution. In this case Km of lipoxygenase for linoleic acid increases from 10(-5) M to 5 X 10(-4) M. The activity of lipoxygenase is maximal, the aerosol OT concentration being 0.03 M and a degree of reversed micelle hydratation 40. Cationic detergents of the cetyltrimethyl ammonium bromide type are not good to form reversed micelles of lipoxygenase, since they inhibit the latter with IC50 = (4 divided by 6) x 10(-4) M. The lipoxygenase preparations in reversed micelles of aerosol OT in octane may be used to synthesize natural metabolites of polyunsaturated fatty acids, for instance of eicosanoids.     

Sedimentation analysis of muscle glycogen phosphorylase b entrapped in hydrated reversed micelles of aerosol OT in octane

The oligomeric state and formation of supramolecular structures of glycogen phosphorylase b from rabbit skeletal muscles have been studied in the system of hydrated reversed micelles of aerosol OT (AOT) in octane. Sedimentation studies show that the oligomeric state of the enzyme is controlled by the degree of hydration of micelles. Monomeric, dimeric, trimeric, tetrameric, hexameric, or octameric forms of the enzyme were observed depending on the degree of micelle hydration.     

Effect of cross-linking on the performance of micelles as drug delivery carriers: a cell uptake study

Poly(polyethylene glycol methyl ether methacrylate-co-methacrylic acid)-block-poly(methyl methacrylate) P(PEGMEMA-co-MAA)-b-PMMA block copolymer were prepared via RAFT (reversible addition-fragmentation chain transfer) polymerization and subsequently self-assembled into micelles as a drug delivery carrier for albendazole (ABZ). For comparison, the micelles were additionally cross-linked to study the effect of shell-cross-linking on the biological activity. The hydrodynamic diameter of cross-linked and un-cross-linked micelles was approximately 40 nm in both cases. While the cross-linked micelle was stable even in good solvents for both blocks, the un-cross-linked micelle was found to lose its integrity in cell growth media. Crosslinking had a major effect on the rate of drug release reducing it dramatically from 50% (uncrosslinked) to around 20% (crosslinked) over a 30 h incubation period. Both drug delivery systems were tested on human prostate cancer cells (PC-3, DU-145) and human ovarian cancer cells (OVCAR-3, A-2780). No toxic effects were measured with the unloaded micelle while the ABZ loaded un-cross-linked micelle lead to IC(50) values between 0.2 and 0.9 μM depending on the cell line. The IC(50) dropped to values between 0.006 and 0.06 μM, depending on cell line, once the micelles were stabilized by cross-linking. Three treatment cycles with ABZ for one day, followed by two days incubation in media using ABZ-loaded drug carriers led to complete cell death even at low concentrations in the case of the cross-linked micelle only. Cellular uptake has been studied using fluorescently labeled micelles and Nile red as model drug, showing cell uptake above the CMC but no micelle uptake below the CMC. Additional biological studies, such as colony formation assay and tubulin disorganization tests, were also performed to gain more insight into the effect of cross-linking of the shell of the micelle. In conclusion, shell-cross-linking is highly recommended, even for glassy micelles, for an efficient cellular uptake at low concentrations.     

Oligomeric state of the muscle glycogen phosphorylase b in the system of reversed micelles of aerosol OT in octane

The oligomeric state and formation of supramolecular structures of glycogen phosphorylase b from rabbit skeletal muscle was studied in the system of aerosol OT (AOT) reversed micelles in octane. The sedimentation experiments have shown that the enzyme oligomeric state depends on the degree of micelle hydration. The enzyme monomer, dimer, trimer, tetramer, hexamer, and octamer were observed, depending on the degree of hydration.     

Synthesis and self-association behavior of biodegradable amphiphilic poly[bis(ethyl glycinat-N-yl)phosphazene]- poly(ethylene oxide) block copolymers

Amphiphilic diblock copolymers with varying compositions of hydrophilic poly(ethylene oxide) (PEO) and hydrophobic poly[bis(ethyl glycinat-N-yl)phosphazene] (PNgly) were synthesized via the controlled cationic-induced polymerization of a phosphoranimine (Cl(3)P=NSiMe(3)) at ambient temperature using a PEO-phosphoranimine macroinitiator. The aqueous-phase transition behavior of PEO-PNgly-3 (M(n) = 10,000) and micelle formation of both PEO-PNgly-3 and PEO-PNgly-4 (M(n) = 8,500) were investigated using fluorescence techniques and dynamic light scattering. The critical micelle concentrations (cmc's) of PEO-PNgly-3 and PEO-PNgly-4 were determined to be 3 and 12 mg/L with the mean diameters of micelles being 120 and 130 nm, respectively. The hydrolytic degradation of these diblock copolymers was also studied in solution. These studies coupled with the biodegradability of the poly[bis(ethyl glycinat-N-yl)phosphazene] block to give benign products make PEO-PNgly copolymers well-suited for a wide variety of biomedical applications including novel biodegradable drug-delivery systems.     

Enzymes incorporated into reversed micelles of surfactants in organic solvents. Study of the protein-aerosol OT-H2O-octane system by sedimentation analysis

Using ultracentrifugation, the systems of reversed micelles of aerosol OT in octane containing solubilized protein (alpha-chymotrypsin, lysozyme, trypsin, egg albumin, alcohol dehydrogenase from horse liver and gamma-globulin) were studied. The changes in the sedimentation coefficients of reversed micelles during incorporation of the protein are correlated (within a wide range of experimental conditions, e. g. degree of surfactant hydration or protein concentration) exclusively with the molecular weight of the solubilized protein. The simplest solubilization model, according to which the protein molecule is incorporated into the inner cavity of the reversed micelle at the stoichiometric ratio of 1 : 1, which does not affect the external sizes of the reversed micelle, has been proposed. Using alpha-chymotrypsin as an example, the conditions, under which the sedimentation properties of the systems deviate from this model, have been found. These deviations occurred at sufficiently low degrees of the surfactant hydration, when the inner cavity of the reversed micelle is smaller than the effective size of the solubilized protein molecule. In the latter case the protein forms a new micelle of necessary (i. e. larger) size. Since the hydrated micelle can be regarded as an elementary (30-100 A) fragment of biomembranes, the results obtained should be taken into consideration when analyzing the structural organization and functioning of the latter.     

Using hydrated reversed micelles to evaluate the dimensions of polymer-protein adducts.

Hydrolysis of N-trans-cynnamoylimidazole catalyzed by conjugates and complexes of alpha-chymotrypsin (ChT) with poly(ethylene glycol) (PEG) of different molecular mass (from 300 to 5000 daltons) was studied in the system of the hydrated reversed micelles of aerosol OT (AOT) in octane at 25 degrees C. The plot of the deacylation constant k3 for PEG--ChT conjugates and complexes versus the degree of hydration of reversed micelles (w0 = [H2O]/[AOT]) was studied. These plots are bell-shaped with maxima shifted to higher degrees of micelle hydration compared to the corresponding value of the shift for ChT. As for PEG--ChT conjugates, the value of the shift of w0 increases with increasing of molecular mass of the attached PEG and/or with the number of polymer chains per ChT molecule. Another picture was observed for PEG--ChT complexes for which the position of the maximum on k3 versusw0 curves was practically the same for all compounds. The values of the thickness of the polymer layer for PEG--ChT conjugates and complexes were calculated. Thus, polymer chains in conjugates placed in hydrated micelles are highly packed, whereas in the case of complexes they form a flat layer on the surface of the protein.     

Interactions of pig brain cytosolic sialidase with gangliosides. Formation of catalytically inactive enzyme-ganglioside complexes

Cytosolic sialidase A was extracted from pig brain and purified about 2000-fold with respect to the starting homogenate (about 550-fold relative to the cytosolic fraction). The enzyme preparation provided a single peak on Ultrogel AcA-34 column chromatography and had an apparent molecular weight of 4 x 10(4). On incubation with micellar ganglioside GT1b, (molecular weight of the micelle, 3.5 x 10(5)) under the conditions used for the enzyme assay, brain cytosolic sialidase A formed two ganglioside-enzyme complexes, I and II, which were isolated and characterized. Complex II had a molecular weight of 4.2 X 10(5), and a ganglioside/protein ratio (w/w) of 4:1. This is consistent with a stoichiometric combination of one ganglioside micelle and two enzyme molecules. Complex I was probably a dimer of complex II. In both complexes I and II cytosolic sialidase was completely inactive. Inactivation of cytosolic sialidase by formation of the corresponding complexes was also obtained with gangliosides GD1a and GD1b, which, like GT1b, are potential substrates for the enzyme and GM1, which is resistant to the enzyme action. Therefore, the enzyme becomes inactive after interacting with ganglioside micelles. GT1b-sialidase complexes acted as excellent substrates for free cytosolic sialidase, as did the complexes with GD1a and GD1b.     

The pH in reversed micelles as imposed by the dihydrogen/proton redox couple and indicated by viologens and cytochrome c3 using hydrogenase as redox catalyst.

The pH values in reversed micelles were measured, making use of the hydrogenase enzyme as redox catalyst short-circuiting the viologen oxidized/semiquinone redox states. The hydrogenases from Desulfovibrio vulgaris (Hildenborough) and from Megasphaera elsdenii were applied. The observed pH values in reversed micelles were not dependent on the type of hydrogenase. Two cationic [cetyltrimethylammonium bromide and dodecylammonium propionate (DAP)] and two anionic sodiumdodecyl sulphate, sodium di(ethylhexyl)sulfosuccinate types of reversed micelles were used in combination with viologens having distinguishable valencies. It was observed that, in the cationic-reversed micelles, the dissociation constant for the semiquinone dimer had about the same value as compared to bulk water, while this value was significantly higher in the anionic-reversed micelles. Furthermore, the dissociation constant was independent of the concentration of viologen semiquinone in the reversed micelle, indicating that exchange kinetics are faster than the dimerisation process. With the exception of DAP, a linear relation exists, pH = a.pHrm + b, between the pH of the bulk water and the pH as measured in the reversed micelle (pHrm). In all these cases the value of a is smaller than unity, the value of b ranges between 1.6-2.7. For DAP the pHrm is always around 7. In DAP-reversed micelles, the counter-ion propionate probably serves as an internal buffer. Using cytochrome c3 as pH indicator in combination with N,N'-di(3-aminopropyl)-4,4'-bipyridinium)4+ to take care of electron transfer, in cetyltrimethylammonium-bromide-reversed micelles the pHrm is about the same as indicated by the viologen; in SDS-reversed micelles the pHrm is always lower than that indicated by N,N'-di(3-aminopropyl)4,4'-pyridinium4+. In contrast to cytochrome c3 from D. vulgaris, which in reversed micelles cannot become reduced directly by its D. vulgaris hydrogenase, the hydrogenase of M. elsdenii is able to reduce its ferredoxin directly.     

Hydrotropic polymeric micelles for enhanced paclitaxel solubility: in vitro and in vivo characterization

The purpose of this investigation was to characterize the in vitro stability and in vivo disposition of paclitaxel in rats after solubilization of paclitaxel into hydrotropic polymeric micelles. The amphiphilic block copolymers consisted of a micellar shell-forming poly(ethylene glycol) (PEG) block and a core-forming poly(2-(4-vinylbenzyloxy)-N,N-diethylnicotinamide) (P(VBODENA)) block. N,N-Diethylnicotinamide (DENA) in the micellar inner core resulted in effective paclitaxel solubilization and stabilization. Solubilization of paclitaxel using polymeric micelles of poly(ethylene glycol)-b-P(D,L-lactide) (PEG-b-PLA) served as a control for the stability study. Up to 37.4 wt % paclitaxel could be loaded in PEG-b-P(VBODENA) micelles, whereas the maximum loading amount for PEG-b-PLA micelles was 27.6 wt %. Thermal analysis showed that paclitaxel in the polymeric micelles existed in the molecularly dispersed amorphous state even at loadings over 30 wt %. Paclitaxel-loaded hydrotropic polymeric micelles retained their stability in water for weeks, whereas paclitaxel-loaded PEG-b-PLA micelles precipitated in a few days. Hydrotropic polymer micelles were more effective than PEG-PLA micelle formulations in inhibiting the proliferation of human cancer cells. Paclitaxel in hydrotropic polymer micelles was administered orally (3.8 mg/kg), intravenously (2.5 mg/kg), or via the portal vein (2.5 mg/kg) to rats. The oral bioavailability was 12.4% of the intravenous administration. Our data suggest that polymeric micelles with a hydrotropic structure are superior as a carrier of paclitaxel due to a high solubilizing capacity combined with long-term stability, which has not been accomplished by other existing polymeric micelle systems.     

Stability of glucose 6-phosphate dehydrogenase complexed with its substrate and/or cofactor in aqueous and micellar environment

Inactivation of glucose 6-phosphate dehydrogenase (G6PDH) complexed with its substrate, glucose 6-phosphate (GP), and/or cofactor, NADP+, has been studied within the range 20-40 degrees C in three media: (a) 0.04 M NaOH-glycine buffer (pH 9.1); (b) Aerosol OT (AOT) reversed micelles in octane; and (c) Triton X-100 micelles in octane supplemented with 10% hexanol. The enzyme inactivation was characterized quantitatively by first order rate constants, kin (s-1). In the case of G6PDH-NADP+ complexes, the values of kin were independent of the initial concentrations of G6PDH, either in aqueous medium or AOT micelles. The values of kin for the complex G6PDH-GP were inversely related to the initial concentration of the enzyme, in both aqueous and micellar media. When inactivation of both complexes were studied in AOT micelles, minimum values of kin corresponded to the degree of hydration W0 = 16.7; at W0 > 16.7 and W0 < 16.7, kin increased. Within the range 20-40 degrees C, the values of kin measured for both complexes in aqueous medium were significantly lower than those measured in AOT micelles. Temperature dependences of kin were characterized by inflections in Arrhenius plots, which corresponded, depending on the medium, to certain temperatures from 33.6 degrees C to 40 degrees C. In all media studied, NADP+ complexes of the enzyme exhibited higher stability than their GP counterparts. The parameters of G6PDH and G6PDH-NADP+ melting, measured by differential scanning microcalorimetry (maximum temperature and half-width of the transition, enthalpy of denaturation, and van't Hoff enthalpy), provided unequivocal evidence of the higher stability of the complex as compared to that of the enzyme. In addition, this approach demonstrated that G6PDH undergoes destabilization in AOT micelles.     

The Investigation on Polyion Complex Micelles Composed of Diammonium Glycyrrhizinate/Poly(Ethylene Glycol)–Glycidyltrimethylammonium Chloride-Grafted Polyasparthydrazide

To prepare stable polyion complex (PIC) micelles, polyasparthydrazide (PAHy) modified with glycidyltrimethylammonium groups and methoxy poly(ethylene glycol) (mPEG) (mPEG-g-PAHy-GTA) was synthesized. The cytotoxicity of the polymer was evaluated by the methyl tetrazolium assay. The polymer entrapped the diammonium glycyrrhizinate (DG) and formed polyion complexes. The effect of pH value, grafting degree of mPEG, copolymer and drug concentration on the micelle formation was investigated by means of measuring entrapment efficiency and micelle size. In vitro DG release from the PIC micelles was detected by dialysis in various media of different ionic strengths. To examine the pharmacokinetic behavior of micelles in vivo, the time course of the drug in plasma was evaluated. The cytotoxicity of the polymer was very low. The results showed that entrapment efficiency can reach about 93%, and the mean particle size was almost 50 nm. The drug release rate decreased with a decrease in ionic strength of the release medium or an increase in the PEG grafting degree. Compared with DG solution, the AUC of DG micelles had a twofold increase. The smaller clearance and longer mean residence time of the DG micelles group compared with DG solution group showed that the DG loaded in PIC micelles can reduce drug elimination and prolong the drug residence time in the blood circulation. The results indicated that PIC micelles composed of mPEG-g-PAHy-GTA would be prospective as a drug carrier to the drugs which can be ionized in solution.KEY WORDS: diammonium glycyrrhizinate, drug delivery systems, poly(ethylene glycol)–glycidyltrimethylammonium chloride-grafted polyasparthydrazide, polyion complex micelles     

Sucrose monoester micelles size determined by Fluorescence Correlation Spectroscopy (FCS)

One of the several uses of sucrose detergents, as well as other micelle forming detergents, is the solubilization of different membrane proteins. Accurate knowledge of the micelle properties, including size and shape, are needed to optimize the surfactant conditions for protein purification and membrane characterization. We synthesized sucrose esters having different numbers of methylene subunits on the substituent to correlate the number of methylene groups with the size of the corresponding micelles. We used Fluorescence Correlation Spectroscopy (FCS) and two photon excitation to determine the translational D of the micelles and calculate their corresponding hydrodynamic radius, R(h). As a fluorescent probe we used LAURDAN (6-dodecanoyl-2-dimethylaminonaphthalene), a dye highly fluorescent when integrated in the micelle and non-fluorescent in aqueous media. We found a linear correlation between the size of the tail and the hydrodynamic radius of the micelle for the series of detergents measured.     

A novel approach to study of action of water-insoluble inhibitors of enzymic reactions

The effect of water-insoluble compounds on enzyme catalytic properties was studied using a colloidal solution of water in organic solvent as reaction medium. In this microheterogeneous medium enzyme is entrapped into hydrated reversed micelles of a surfactant, the dimensions of the internal hole of the micelles being dependent on the ratio of water to surfactant. At sufficiently low values of this ratio the molecule of entrapped enzyme has limited mobility in the micelle. Because of this the interaction of the enzyme with water-insoluble compound which is added in assay solution and intercalated in the surface layer of the micelle may be manifested. The suggested method was used to study the inhibitory action of dihydroriboflavin esters on D-amino acid oxidase from pig kidney and soybean lipoxygenase. The reaction medium was hydrated reversed micelles of Aerosol OT in octane. The method of sedimentation in an analytical ultracentrifuge has shown the dihydroriboflavin esters to be completely included into reversed micelles.     

Mechanism of thioflavin T binding to amyloid fibrils

Thioflavin T is a benzothiazole dye that exhibits enhanced fluorescence upon binding to amyloid fibrils and is commonly used to diagnose amyloid fibrils, both ex vivo and in vitro. In aqueous solutions, thioflavin T was found to exist as micelles at concentrations commonly used to monitor fibrils by fluorescence assay ( approximately 10-20 microM). Specific conductivity changes were measured at varying concentration of thioflavin T and the critical micellar concentration was calculated to be 4.0+/-0.5 microM. Interestingly, changes in the fluorescence excitation and emission of thioflavin T were also dependent on the micelle formation. The thioflavin T micelles of 3 nm diameter were directly visualized using atomic force microscopy, and bound thioflavin T micelles were observed along the fibril length for representative fibrils. Increasing concentration of thioflavin T above the critical micellar concentration shows increased numbers of micelles bound along the length of the amyloid fibrils. Thioflavin T micelles were disrupted at low pH as observed by atomic force microscopy and fluorescence enhancement upon binding of thioflavin T to amyloid fibrils also reduced by several-fold upon decreasing the pH to below 3. This suggests that positive charge on the thioflavin T molecule has a role in its micelle formation that then bind the amyloid fibrils. Our data suggests that the micelles of thioflavin T bind amyloid fibrils leading to enhancement of fluorescence emission.     

Core-cross-linked polymeric micelles as paclitaxel carriers

Cross-linkable di- and triblock copolymers of poly(epsilon-caprolactone) (PCL) and monomethoxyl poly(ethylene glycol) (MPEG) were synthesized. These amphiphilic copolymers self-assembled into nanoscale micelles capable of encapsulating hydrophobic paclitaxel in their hydrophobic cores in aqueous solutions. To further enhance their thermodynamic stability, the micelles were cross-linked by radical polymerization of the double bonds introduced into the PCL blocks. Reaction conditions were found to significantly affect both the cross-linking efficiency and the micelle size. The encapsulation of paclitaxel into the micelles was confirmed by the proton nuclear magnetic resonance (1H NMR) spectroscopy. Encouragingly, paclitaxel-loading efficiency of micelles was enhanced significantly upon micelle core-cross-linking. Both the micelle size and the drug loading efficiency increased markedly with increasing the PCL block lengths, no matter if the micelles were core-cross-linked or not. However, paclitaxel-loading did not obviously affect the micelle size or size distribution. The cross-linked micelles exhibited a significantly enhanced thermodynamic stability against dilution with aqueous solvents. The efficient cellular uptake of paclitaxel loaded in the nanomicelles was demonstrated by confocal laser scanning microscopy (CLSM) imaging. This new biodegradable nanoscale carrier system merits further investigations for parenteral drug delivery.     

Characterization of Phospholipid Mixed Micelles by Translational Diffusion

The concentration dependence of the translational self diffusion rate, D (s), has been measured for a range of micelle and mixed micelle systems. Use of bipolar gradient pulse pairs in the longitudinal eddy current delay experiment minimizes NOE attenuation and is found critical for optimizing sensitivity of the translational diffusion measurement of macromolecules and aggregates. For low volume fractions Phi (Phi\\ le 15% v/v) of the micelles, experimental measurement of the concentration dependence, combined with use of the D (s)= D (o)(1-3.2lambdaPhi) relationship, yields the hydrodynamic volume. For proteins, the hydrodynamic volume, derived from D (s) at infinitely dilute concentration, is found to be about 2.6 times the unhydrated molecular volume. Using the data collected for hen egg white lysozyme as a reference, diffusion data for dihexanoyl phosphatidylcholine (DHPC) micelles indicate approximately 27 molecules per micelle, and a critical micelle concentration of 14 mM. Differences in translational diffusion rates for detergent and long chain phospholipids in mixed micelles are attributed to rapid exchange between free and micelle-bound detergent. This difference permits determination of the free detergent concentration, which, for a high detergent to long chain phospholipid molar ratio, is found to depend strongly on this ratio. The hydrodynamic volume of DHPC/POPC bicelles, loaded with an M2 channel peptide homolog, derived from translational diffusion, predicts a rotational correlation time that slightly exceeds the value obtained from peptide (15)N relaxation data.     

Leukotriene B4 metabolism by hepatic cytochrome P-450

Leukotriene B4 (LTB) was found to be metabolized by suspensions of rat liver microsomes in the presence of NADPH and oxygen. The rate of LTB metabolism was also measured in reconstituted systems of both micelles and phospholipid vesicles containing cytochrome P-450-LM2, NADPH cytochrome P-450 reductase, and cytochrome b5. A 1 microM concentration of LTB was metabolized by rat hepatic microsomes at a rate of 4 pmol LTB/min/nmole P-450, and by vesicle and micelle reconstituted systems at 3 pmole/min/nmole P-450-LM2. At this rate a 10 g rat liver exposed to 1 microM LTB can metabolize 30 micrograms per hour. In that the leukotrienes are pharmacologically active at nanomolar concentrations, hepatic metabolism may be an important pathway of leukotriene inactivation.