A novel cold-active xylanase from the cellulolytic myxobacterium Sorangium cellulosum So9733-1: gene cloning, expression, and enzymatic characterization

The cellulolytic myxobacterium Sorangium cellulosum is able to efficiently degrade many kinds of polysaccharides, but none of the enzymes involved have been characterized. In this paper, a xylanase gene (xynA) was cloned from S. cellulosum So9733-1 using thermal asymmetric interlaced PCR. The gene is composed of 1,209 bp and has only 52.27% G + C content, which is much lower than that of most myxobacterial DNA reported (67–72%). Gene xynA encodes a 402 amino acid protein that contains a single catalytic domain belonging to the glycoside hydrolase family 10. The novel xylanase gene, xynA, was expressed in Escherichia coli BL21 (DE3) and the recombinant protein (r-XynA) was purified by Ni-affinity chromatography. The r-XynA had the optimum temperature of 30–35°C and exhibited 33.3% activity at 5°C and 13.7% activity at 0°C. Approximately 80% activity was lost after 20-min pre-incubation at 50°C. These results indicate that r-XynA is a cold-active xylanase with low thermostability. At 30°C, the K _m values of r-XynA on beechwood xylan, birchwood xylan, and oat spelt xylan were 25.77 ± 4.16, 26.52 ± 4.78, and 38.13 ± 5.35 mg/mL, respectively. The purified r-XynA displayed optimum activity at pH 7.0. The activity of r-XynA was enhanced by the presence of Ca²⁺. The r-XynA hydrolyzed beechwood xylan, birchwood xylan, and xylooligosaccharides (xylotriose, xylotetraose, and xylopentose) to produce primarily xylose and xylobiose. To our knowledge, this is the first report on the characterization of a xylanase from S. cellulosum.     

Cloning of a Family 11 Xylanase Gene from Bacillus amyloliquefaciens CH51 Isolated from Cheonggukjang

Bacillus amyloliquefaciens CH51, an isolate from cheonggukjang, Korean fermented soyfood, secretes several enzymes into culture medium. A gene encoding 19 kDa xylanase was cloned by PCR. Sequencing showed that the gene encoded a glycohydrolase family 11 xylanase and named xynA. xynAHis, xynA with additional codons for his-tag, was overexpressed in Escherichia coli BL21(DE3) using pET-26b(+). XynAHis was purified using HisTrap affinity column. K_m and V_max of XynAHis were 0.363 mg/ml and 701.1 μmol/min/mg, respectively with birchwood xylan as a substrate. The optimum pH and temperature were pH 4 and 25 °C, respectively. When xynA was introduced into Bacillus subtilis WB600, active XynA was secreted into culture medium.     

Cloning,expression and characterization of a novel cold-active and halophilic xylanase from Zunongwangia profunda

A new xylanase gene (xynA) from the marine microorganism Zunongwangia profunda was identified to encode 374 amino acid residues. Its product (XynA) showed the highest identity (42.78 %) with a xylanase from Bacillus sp. SN5 among the characterized xylanases. XynA exhibited the highest activity at pH 6.5 and 30 °C, retaining 23 and 38 % of the optimal activity at 0 and 5 °C, respectively. XynA was not only cold active, but also halophilic, and both its activity and thermostability could be significantly increased by NaCl, showing the highest activity (180 % of the activity) at 3 M NaCl and retaining nearly 100 % activity at 5 M NaCl, compared to the absence of NaCl. In the presence of 3 M NaCl, the k _cat/K _m value of XynA exhibited a 3.41-fold increase for beechwood xylan compared to no added NaCl, and the residual activity of XynA increased from 23 % (no added NaCl) to 58 % after 1 h incubation at 45 °C. This may be the first report concerning a cold-adapted xylanase from a non-halophilic species that displays the highest activity at a NaCl concentration range from 3 to 5 M. The features of cold activity and salt tolerance suggest the potential application of XynA in the food industry and bioethanol production from marine seaweeds.     

Nucleotide sequences of two contiguous and highly homologous xylanase genes xynA and xynB and characterization of XynA from Clostridium thermocellum

A 5.7-kbp region of the Clostridium thermocellum F1 DNA was sequenced and found to contain two contiguous and highly homologous xylanase genes, xynA and xynB. The xynA gene encoding the xylanase XynA consists of 2049 bp and encodes a protein of 683 amino acids with a molecular mass of 74 511 Da, and the xynB gene encoding the xylanase XynB consists of 1371 bp and encodes a protein of 457 amino acids with a molecular mass of 49 883 Da. XynA is a modular enzyme composed of a typical N-terminal signal peptide and four domains in the following order: a family-11 xylanase domain, a family-VI cellulose-binding domain, a dockerin domain, and a NodB domain. XynB exhibited extremely high overall sequence homology with XynA (identity 96.9%), while lacking the NodB domain present in the latter. These facts suggested that the xynA and xynB genes originated from a common ancestral gene through gene duplication. XynA was purified from a recombinant Escherichia coli strain and characterized. The purified enzyme was highly active toward xylan; the specific activity on oat-spelt xylan was 689 units/mg protein. Immunological and zymogram analyses suggested that XynA and XynB are components of the C. thermocellum F1 cellulosome. Received: 21 September 1998 / Received revision: 30 October 1998 / Accepted: 29 November 1998     

A novel xylanase,XynA4-2, from thermoacidophilic <Emphasis Type="Italic">Alicyclobacillus</Emphasis> sp. A4 with potential applications in the brewing industry

A xylanase gene, xynA4-2, was obtained from the genome sequence of thermoacidophilic Alicyclobacillus sp. A4 and expressed in Escherichia coli BL21 (DE3). xynA4-2 encodes a mature protein of 411 residues with a calculated molecular weight of 46.8 kDa. Based on the amino acid sequence similarities (highest identity of 61%), the enzyme was confined into glycoside hydrolase family 10. The purified recombinant XynA4-2 exhibited maximum activity at pH 6.2 and 55°C. The enzyme was stable over a broad pH range, retaining more than 90% of the original activity at pH 5.8–12.0, 37°C for 1 h. The substrate specificity of XynA4-2 was relatively narrow, exhibiting 100, 93, and 35% of the relative activity towards birchwood xylan, oat spelt xylan, and wheat arabinoxylan, respectively. Supplementation of XynA4-2 to mash caused the reduction of mash filtration rate (5.6%) and viscosity (4.0%). When combined with the commercial glucanase from Sunson, higher reduction was detected in the filtration rate (12.0%) and viscosity (17.2%). These favorable properties make XynA4-2 a good candidate in the brewing industry.     

Purification,Characterization, and Molecular Cloning of Acidophilic Xylanase from Penicillium sp.40

Penicillum sp. 40, which can grow in an extremely acidic medium at pH 2.0 was screened from an acidic soil. This fungus produces xylanases when grown in a medium containing xylan as a sole carbon source. A major xylanase was purified from the culture supernatant of Penicillium sp. 40 and designated XynA. The molecular mass of XynA was estimated to be 25,000 by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. XynA has an optimum pH at 2.0 and is stable in pH 2.0-5.0. Western blot analysis using anit-XynA antibody showed that XynA was induced by xylan and repressed by glucose. Also, its production was increased by an acidic medium. The gene encoding XynA (xynA) was isolated from the genomic library of Penicillium sp. 40. The structural part of xynA was found to be 721 bp. The nucleotide sequence of cDNA amplified by RT-PCR showed that the open reading frame of xynA was interrupted by a single intron which was 58 bp in size and encoded 221 amino acids. Direct N-terminal amino acid sequencing showed that the precursor of XynA had a signal peptide composed of 31 amino acids. The molecular mass caliculated from the deduced amino acid sequence of XynA is 20,713. This is lower than that estimated by gel electrophoresis, suggesting that XynA is a glycoprotein. The predicted amino acid sequence of XynA has strong similarity to other family11 xylanases from fungi.     

Purification and characterization of a high-thermostable β-xylanase from newly isolated Thermomyces lanuginosus THKU-49

Highly thermostable β-xylanase produced by newly isolated Thermomyces lanuginosus THKU-49 strain was purified in a four-step procedure involving ammonium sulfate precipitation and subsequent separation on a DEAE-Sepharose fast flow column, hydroxylapatite column, and Sephadex G-100 column, respectively. The enzyme purified to homogeneity had a specific activity of 552 U/mg protein and a molecular weight of 24.9 kDa. The optimal temperature of the purified xylanase was 70°C, and it was stable at temperatures up to 60°C at pH 6.0; the optimal pH was 5.0–7.0, and it was stable in the pH range 3.5–8.0 at 4°C. Xylanase activity was inhibited by Mn²⁺, Sn²⁺, and ethylenediaminetetraacetic acid. The xylanase showed a high activity towards soluble oat spelt xylan, but it exhibited low activity towards insoluble oat spelt xylan; no activity was found to carboxymethylcellulose, avicel, filter paper, locust bean gum, cassava starch, and p-nitrophenyl β-d-xylopyranoside. The apparent K _m value of the xylanase on soluble oat spelt xylan and insoluble oat spelt xylan was 7.3 ± 0.236 and 60.2 ± 6.788 mg/ml, respectively. Thin-layer chromatography analysis showed that the xylanase hydrolyzed oat spelt xylan to yield mainly xylobiose and xylose as end products, but that it could not release xylose from the substrate xylobiose, suggesting that it is an endo-xylanase.     

Xylanase from a soil isolate, <Emphasis Type="Italic">Bacillus pumilus</Emphasis>: gene isolation,enzyme production,purification, characterization and one-step separation by aqueous-two-phase system

A xylanase producer, Bacillus pumilus SB-M13, was isolated from soil and identified using various tests based on carbohydrate fermentation preferences and fatty acid analysis. Xylanase gene, isolated using PCR amplification, was partially sequenced and it showed 89–94% sequence similarity to the xylanase genes of other B. pumilus strains. Xylanase with very low level of cellulase was produced on agricultural byproducts. The enzyme has been purified 186-fold by hydrophobic interaction chromatography and biochemically characterized. It has a molecular weight of 24.8 kDa and pI of 9.2. Xylanolytic activity is stable at alkaline pH and highest activity is observed at 60 °C and pH 7.5. Enzyme K _m and k _cat values were determined as 1.9 mg/mL and 42,600 U/mg, respectively. In aqueous-two-phase system, xylanase always partitioned to the top phase. Basic pH, low PEG concentration, salt addition, and presence of microbial cells enhanced xylanase partitioning. A maximum sevenfold purification, 10-fold concentration and 100% xylanase recovery were obtained, separately, by adjusting system parameters. A fourfold concentrated xylanase was obtained with 70% enzyme recovery only in one step ATPS process without cell harvesting.     

Characterization of a thermostable and alkaline xylanase from Bacillus sp. and its bleaching impact on wheat straw pulp

Delignification efficacy of xylanases to facilitate the consequent chemical bleaching of Kraft pulps has been studied widely. In this work, an alkaline and thermally stable cellulase-less xylanase, derived from a xylanolytic Bacillus subtilis, has been purified by a combination of gel filtration and Q-Sepharose chromatography to its homogeneity. Molecular weight of the purified xylanase was 61 kDa by SDS–PAGE. The purified enzyme revealed an optimum assay temperature and pH of 60°C and 8.0, respectively. Xylanase was active in the pH range of 6.0–9.0 and stable up to 70°C. Divalent ions like Ca²⁺, Mg²⁺ and Zn²⁺ enhanced xylanase activity, whereas Hg²⁺, Fe²⁺, and Cu²⁺ were inhibitory to xylanase at 2 mM concentration. It showed K _m and V _max values of 9.5 mg/ml and 53.6 μmol/ml/min, respectively, using birchwood xylan as a substrate. Xylanase exhibited higher values of turn over number (K _cat) and catalytic efficiency (K _cat/K _m) with birchwood xylan than oat spelt xylan. Bleach-boosting enzyme activity at 30 U/g dry pulp displayed the optimum bio-delignification of Kraft pulp resulting in 26.5% reduction in kappa number and 18.5% ISO induction in brightness at 55°C after 3 h treatment. The same treatment improved the pulp properties including tensile strength and burst index, demonstrating its potential application in pre-bleaching of Kraft pulp.     

A xylanase from <Emphasis Type="Italic">Streptomyces sp.</Emphasis> FA1: heterologous expression,characterization, and its application in Chinese steamed bread

Xylanases (EC 3.2.1.8) are hydrolytic enzymes that have found widespread application in the food, feed, and paper-pulp industries. Streptomyces sp. FA1 xynA was expressed as a secreted protein in Pichia pastoris, and the xylanase was applied to the production of Chinese steamed bread for the first time. The optimal pH and the optimal temperature of XynA were 5.5 and 60 °C, respectively. Using beechwood as substrate, the K _m and V _max were 2.408 mg mL^?1 and 299.3 µmol min^?1 mg^?1, respectively. Under optimal conditions, a 3.6-L bioreactor produced 1374 U mL^?1 of XynA activity at a protein concentration of 6.3 g L^?1 after 132 h of fermentation. Use of recombinant XynA led to a greater increase in the specific volume of the CSB than could be achieved using commercial xylanase under optimal conditions. This study provides the basis for the application of the enzyme in the baking industry.     

Purification and characterization of an extracellular alpha-L-arabinosidase from a novel isolate Bacillus pumilus ARA and its over-expression in Escherichia coli

The α-l-arabinosidase, AraB, was induced when Bacillus pumilus ARA was grown at 50°C in a minimal medium containing xylan. A 56-kDa protein with α-l-arabinosidase activity was purified from culture supernatant to gel electrophoretic homogeneity. The optimal activity was at pH 6.4 and 60°C over a 10-min assay. The purified enzyme was stable over a pH range of 5.2–7.6 and had a 1-h half life at 70°C. The enzyme released arabinose from oat spelt xylan. Kinetic experiments at 60°C with p-nitrophenyl α-l-arabinofuranoside as substrate gave a K _m, and V _max of 1.05 mM and 240 U per mg of protein. The NH₂-terminal amino acid sequence of the enzyme was determined, and its gene araB was subsequently cloned, sequenced, and over-expressed in Escherichia coli. The open reading frame of araB consists of a 1,479-bp fragment encoding a protein of 472 amino acids, which belonged to family 51 of the glycoside hydrolases with an identity of 67% to the protein encoded by abfB of Bacillus subtilis 168.     

Production of alkaliphilic, halotolerent, thermostable cellulase free xylanase by Bacillus halodurans PPKS-2 using agro waste: single step purification and characterization

The alkaliphilic Bacillus halodurans strain PPKS-2 was shown to produce extracellular alkaliphilic, thermostable and halotolerent xylanase. The culture conditions for xylanase production were optimized with respect to pH, temperature, NaCl and inexpensive agro waste as substrates. Xylanase yield was enhanced more than four fold in the presence of 1% corn husk and 0.5% peptone or feather hydrolysate at pH 11 and 37°C. Xylanase was purified to 11.8-fold with 8.7% yield by using traditional chromatographic methods whereas the same enzyme purified to 20-fold with 72% yield by using corn husk as ligand. Its molecular mass was estimated to be 24 kDa by SDS–PAGE. The xylanase had maximal activity at pH 11 and 70°C. The enzyme was active over broad range, 0–20% sodium chloride. The enzyme was thermostable retaining 100% of the original activity at 70°C for 3 h. The apparent K _m values for oat spelt xylan and brichwood xylan were 4.1 and 4.4 mg/ml respectively. The deduced internal amino acid sequence of PPKS-2 xylanase resembled the sequence of β-1,4-endoxylanase, which is member of glycoside hydrolase family 11.     

High stability and low competitive inhibition of thermophilic Thermopolyspora flexuosa GH10 xylanase in biomass-dissolving ionic liquids

Thermophilic Thermopolyspora flexuosa GH10 xylanase (TfXYN10A) was studied in the presence of biomass-dissolving hydrophilic ionic liquids (ILs) [EMIM]OAc, [EMIM]DMP and [DBNH]OAc. The temperature optimum of TfXYN10A with insoluble xylan in the pulp was at 65–70 °C, with solubilised 1 % xylan at 70–75 °C and with 3 % xylan at 75–80 °C. Therefore, the amount of soluble substrate affects the enzyme activity at high temperatures. The experiments with ILs were done with 1 % substrate. TfXYN10A can partially hydrolyse soluble xylan even in the presence of 40 % (v/v) ILs. Although ILs decrease the apparent temperature optimum, a surprising finding was that at the inactivating temperatures (80–90 °C), especially [EMIM]OAc increases the stability of TfXYN10A indicating that the binding of IL molecules strengthens the protein structure. Earlier kinetic studies showed an increased K _m with ILs, indicating that ILs function as competitive inhibitors. TfXYN10A showed low increase of K _m, which was 2-, 3- and 4-fold with 15 % [EMIM]OAc, [DBNH]OAc and [EMIM]DMP, respectively. One reason for the low competitive inhibition could be the high affinity to the substrate (low K _m). Xylanases with low K _m (~1 mg/mL) appear to show higher tolerance to ILs than xylanases with higher K _m (~2 mg/mL). Capillary electrophoresis showed that TfXYN10A hydrolyses xylan to the end-products in 15–35 % ILs practically as completely as without IL, also indicating good binding of the short substrate molecules by TfXYN10A despite of major apparent IL binding sites above the catalytic residues. Substrate binding interactions in the active site appear to explain the high tolerance of TfXYN10A to ILs.

     

Cloning,purification and characterization of an alkali-stable endoxylanase from thermophilic <Emphasis Type="Italic">Geobacillus</Emphasis> sp. 71

The gene encoding a xylanase from Geobacillus sp. 71 was isolated, cloned, and sequenced. Purification of the Geobacillus sp 7.1 xylanase, XyzGeo71, following overexpression in E. coli produced an enzyme of 47 kDa with an optimum temperature of 75°C. The optimum pH of the enzyme is 8.0, but it is active over a broad pH range. This protein showed the highest sequence identity (93%) with the xylanase from Geobacillus thermodenitrificans NG80-2. XyzGeo71 contains a catalytic domain that belongs to the glycoside hydrolase family 10 (GH10). XyzGeo71 exhibited good pH stability, remaining stable after treatment with buffers ranging from pH 7.0 to 11.0 for 6 h. Its activity was partially inhibited by Al³⁺ and Cu²⁺ but strongly inhibited by Hg²⁺. The enzyme follows Michaelis–Menten kinetics, with K_m and V_max values of 0.425 mg xylan/ml and 500 μmol/min.mg, respectively. The enzyme was free from cellulase activity and degraded xylan in an endo fashion. The action of the enzyme on oat spelt xylan produced xylobiose and xylotetrose.     

Immobilization of Xylan-Degrading Enzymes from Scytalidium thermophilum on Eudragit L-100

Summary Xylanase from Scytalidium thermophilum was immobilized on Eudragit L-100, a pH sensitive copolymer of methacrylic acid and methyl methacrylate. The enzyme was non-covalently immobilized and the system expressed 70% xylanase activity. The immobilized preparation had broader optimum temperature of activity between 55 and 65 °C as compared to 65 °C in case of free enzyme and broader optimum pH between 6.0 and 7.0 as compared to 6.5 in case of free enzyme. Immobilization increased the t_1/2 of enzyme at 60 °C from 15 to 30 min with a stabilization factor of 2. The K_m and V_max values for the immobilized and free xylanase were 0.5% xylan and 0.89 μmol/ml/min and 0.35% xylan and 1.01 μmol/ml/min respectively. An Arrhenius plot showed an increased value of activation energy for immobilized xylanase (227 kcal/mol) as compared to free xylanase (210 kcal/mol) confirming the higher temperature stability of the free enzyme. Enzymatic saccharification of xylan was also improved by xylanase immobilization.     

A new xylanase from thermoacidophilic Alicyclobacillus sp. A4 with broad-range pH activity and pH stability

We have identified a highly pH-adaptable and stable xylanase (XynA4) from the thermoacidophilic Alicyclobacillus sp. A4, a strain that was isolated from a hot spring in Yunnan Province, China. The gene (xynA4) that encodes this xylanase was cloned, sequenced, and expressed in Escherichia coli. It encodes a 338-residue polypeptide with a calculated molecular mass of 42.5 kDa. The deduced amino acid sequence is most similar to (53% identity) an endo-1,4-β-xylanase from Geobacillus stearothermophilus that belongs to family 10 of the glycoside hydrolases. Purified recombinant XynA4 exhibited maximum activity at 55°C and pH 7.0, had broad pH adaptability (>40% activity at pH 3.8–9.4) and stability (retaining >80% activity after incubation at pH 2.6–12.0 for 1 h at 37°C), and was highly thermostable (retaining >90% activity after incubation at 60°C for 1 h at pH 7.0). These properties make XynA4 promising for application in the paper industry. This is the first report that describes cloning and expression of a xylanase gene from the genus Alicyclobacillus.     

Cloning and Characterization of Xylanase A from the Strain <Emphasis Type="Italic">Bacillus</Emphasis> sp. BP-7: Comparison with Alkaline pI-Low Molecular Weight Xylanases of Family 11

The xynA gene encoding a xylanase from the recently isolated Bacillus sp. strain BP-7 has been cloned and expressed in Escherichia coli. Recombinant xylanase A showed high activity on xylans from hardwoods and cereals, and exhibited maximum activity at pH 6 and 60°C. The enzyme remained stable after incubation at 50°C and pH 7 for 3 h, and it was strongly inhibited by Mn²⁺, Fe³⁺, Pb²⁺, and Hg²⁺. Analysis of xylanase A in zymograms showed an apparent molecular size of 24 kDa and a pI of above 9. The amino acid sequence of xylanase A, as deduced from xynA gene, shows homology to alkaline pI-low molecular weight xylanases of family 11 such as XynA from Bacillus subtilis. Analysis of codon usage in xynA from Bacillus sp. BP-7 shows that the G+C content at the first and second codon positions is notably different from the mean values found for glycosyl hydrolase genes from Bacillus subtilis.     

Production and optimization of cellulase-free, alkali-stable xylanase by Bacillus pumilus SV-85S in submerged fermentation

This paper reports the production of a cellulase-free and alkali-stable xylanase in high titre from a newly isolated Bacillus pumilus SV-85S using cheap and easily available agro-residue wheat bran. Optimization of fermentation conditions enhanced the enzyme production to 2995.20 ± 200.00 IU/ml, which was 9.91-fold higher than the activity under unoptimized basal medium (302.2 IU/ml). Statistical optimization using response-surface methodology was employed to obtain a cumulative effect of peptone, yeast extract, and potassium nitrate (KNO₃) on enzyme production. A 2³ central composite design best optimized the nitrogen source at the 0 level for peptone and yeast extract and at the −α level for KNO₃, along with 5.38-fold increase in xylanase activity. Addition of 0.1% tween 80 to the medium increased production by 1.5-fold. Optimum pH for xylanase was 6.0. The enzyme was 100% stable over the pH range from 5 to 11 for 1 h at 37°C and it lost no activity, even after 3 h of incubation at pH 7, 8, and 9. Optimum temperature for the enzyme was 50°C, but the enzyme displayed 78% residual activity even at 65°C. The enzyme retained 50% activity after an incubation of 1 h at 60°C. Characteristics of B. pumilus SV-85S xylanase, including its cellulase-free nature, stability in alkali over a long duration, along with high-level production, are particularly suited to the paper and pulp industry.     

Signal peptide of <Emphasis Type="Italic">Aureobasidium</Emphasis><Emphasis Type="Italic">pullulans</Emphasis> xylanase: use for extracellular production of a fungal xylanase by <Emphasis Type="Italic">Escherichia coli</Emphasis>

An extracellular xylanase XynI of glycoside hydrolase family 11 from the dimorphic fungus Aureobasidium pullulans ATCC 20524 possesses an N-terminal extension of 34 amino acids (Ohta et al., J. Biosci. Bioeng. 92:262–270, 2001). The N-terminal extension includes three sites (Ala-X-Ala-X-Ala-X-Ala) that are potentially cleavable by signal peptidase I of Escherichia coli. The A. pullulans xynI signal sequence was fused in frame to the mature protein region of the equivalent xylanase gene xynA from the filamentous fungus Penicillium citrinum. The gene fusion xynI::A was inserted into the plasmid pET-26b(+) to yield pEXP401. An E. coli BL21(DE3) transformant harboring the pEXP401 exhibited xylanase activity (per ml of the culture) of 16.8 U in the fraction of culture supernatant as well as 4.29 U in the fraction of cell-free extract after 12 h of growth with isopropyl-β-d-thiogalactopyranoside at 30°C. N-terminal amino acid sequence analysis of the secreted recombinant proteins revealed cleavage at four distinct sites within the N-terminal extension of XynI, two of which conformed to the Ala-X-Ala motif prior to the cleavage site. The XynA proteins secreted into the culture medium showed high specific activities from 506 to 651 U/mg, which were twofold higher than that of the native enzyme.