Dental reductions and dental caries

Although first permanent molar hypoconulid absence, third molar agenesis, and small tooth size are all part of the evolutionary trend of dental reduction, each bears a different relationship to dental caries. Caries prevalence in the maxillary and mandibular permanent first molars of the Burlington Research Centre serial experimental group at age 16 years was less in the children whose first molars were missing the hypoconulid. Conversely, caries prevalence in mandibular first molars was greater in the children who had agenesis of third molars. The extraction of first molars due to caries was more frequent in children with agenesis of third molars, less frequent in those with absence of hypoconulids of the first molars and unrelated to tooth size. Caries prevalence was less in small teeth, and occurred least in the small mandibular first molars with four cusps. Whereas this is in harmony with the hypothesis that evolutionary dental reductions resulted from the pressure of caries, the increased prevalence of caries and extractions coinciding with third molar agenesis does not support this view. In addition, agenesis of hypoconulids and agenesis of third molars were related to changes in structures unrelated to caries.     

Tooth morphology and other aspects of the Teso dentition

The teeth of over 5,000 Teso schoolchildren members of a Nilo-Hamitic tribe in East Africa, were examined for morphological traits. There was a significant difference between the sexes in the number of cusps on the lower first and second molars, in the prevalence of the cusp of Carabelli, and in variability and agenesis of the upper lateral incisor. The results showed that females consistently favoured tooth reduction. There was also a tendency among those possessing extra cusps on one molar to have extra cusps or other molars. Records kept of the prevalence of the tribal custom of extracting lower central incisors indicated that this practise is rapidly dying out. On another group of teeth which had been extracted from adults common variations of root morphology were noted, together with the fissure pattern of the lower molars. Measurements were made of those teeth which were unworn and were not broken down by dental decay, and the lower third molar was found to be the largest tooth of the series. Observations on the pattern of molar tooth wear showed that the buccal as well as the occlusal surface was strongly affected.     

Family studies of tooth size factors in the permanent dentition.

Correlations between dimensions of the permanent teeth in Australian Aboriginals were studied by factor analysis to disclose the main sources of shared variability. Findings indicated that in both males and females most of the common variability in the tooth dimensions could be accounted for by factors representing mesiodistal size of anterior teeth, buccolingual size of anterior teeth, generalized size of the premolars and generalized size of the molars. Factor scores derived from the analysis were used to calculate intraclass correlations among brothers and among sisters. These correlations tended to be higher for the factors contributing most to the common variability indicating that the factors might represent fields under direct genetic control. There was no trend for intraclass correlations among siblings derived from multivariate scores to be consistently higher than those based on observed tooth dimensions. The main advantage to the user of factor analysis is the ability to interpret associations between interrelated variables more objectively than is possible by conventional correlation methods.     

鄂西“南方古猿”和印尼早更新世若干人类化石

在鄂西发现的四枚臼齿化石曾被认为是南方古猿的。鄂西臼齿,从其齿冠尺寸和形状等来看,与非洲的有关材料对比,更接近人属成员的;与印尼早更新世有关的化石对比,与魁人等的很相似。直立人牙齿的演化趋势和变异性表明:鄂西臼齿以及印尼早更新世人类下颌骨化石更大的可能是代表一类时代较早的直立人。     

Dentition of moustached tamarins (Saguinus mystax mystax) from Padre Isla, Peru, part 1: quantitative variation

Analyses of dental variation in geographically restricted, wild populations of primates are extremely rare; however, such data form the best source for models of likely degrees of variation within and between fossil species. Data from dental casts of a geographically restricted population of moustached tamarins (Saguinus mystax mystax) from Padre Isla, Peru, document high levels of dental variability, as measured by coefficients of variation, in a nonsexually dimorphic species, despite its isolation and small population size. Like other primates, moustached tamarins show lower variability in the dimensions of the first molars and increased variability in the dimensions of the final molars in the toothrow. Moustached tamarins from Padre Isla have a distinctive pattern of variability in the remaining teeth, including more stable tooth lengths in the anterior and posterior portions of the toothrow, and more stable tooth widths in the midregion of the toothrow. High variability in incisor width may be due to age effects of a distinctive diet and pattern of dental wear.     

Contours of maxillary molars studied in Australian aboriginals

Distances from the central pit to the perimeter of the crown of permanent upper molars were measured on standardized occlusal photographs of dental casts representing 210 male and 181 female Aboriginals from Yuendumu in the Northern Territory of Australia. In both males and females the first molar was the largest tooth but it showed least variability. Variabilities of the distances tended to be greater for radii constructed in the buccolingual direction than for the transverse mesiodistal radii. The most marked size reduction in the molar series from first to third related to the distolingual part of the crown, which was also the most variable region. Size differences between molars in the mesial contour radii were not marked. Sexual dimorphism was evident in most crown radii, being most marked for the second molar.     

Sexual dimorphism in crown units of mandibular deciduous and permanent molars in Australian Aborigines.

Sexual differences in the crown units of mandibular molars were investigated in Australian Aborigines. The first and second deciduous molars (dm1 and dm2), and first to third permanent molars (M1, M2 and M3) were measured on dental casts using a sliding caliper. Measurements of tooth crowns included overall mesiodistal and buccolingual diameters, as well as the mesiodistal and buccolingual diameters of the trigonid and talonid. Percentage dimorphism values were greater in the talonid dimensions than the trigonid, indicating that sex differences tend to be larger in the later-developing crown units. Sex differences in mesiodistal diameters increased from dm1 to M2 but decreased for M3, the tooth that showed the least dimorphism of all the molars. This result seems to be due to the marked variability in size of the M3 between individuals.     

Enlarged occlusal surfaces on first molars due to severe attrition and hypercementosis: examples from prehistoric coastal populations of Texas

During an examination of prehistoric samples from the Texas coast, individuals consistently exhibited a suite of traits on the first molars that included severe wear, hypercementosis, and resorption of the buccal margin of the alveolus. The occlusal surface of the tooth was worn below the cervical margin, with the subsequent incorporation of the buccal surface of the buccal roots into the occlusal plane. This expanded occlusal surface, which extends the buccal surface beyond the normal edge of the tooth, is composed of a combination of original enamel, secondary dentin, and cementum. There is a marked rounding of the buccal aspect of the occlusal surface. These conditions were noted in both maxillary and mandibular first molars. The resorption of alveolar bone surrounding the buccal roots resembles resorption associated with periodontal infection and is thought to be the result of severe levels of stress being applied to this portion of the dentition.     

The dentition of the Indian Knoll skeletal population: odontometrics and cusp number.

Data on the permanent dentition of 153 individuals from the well known Indian Knoll skeletal population are presented. Mesiodistal and buccolingual measurements were taken with a Helios dial caliper. Cusp number of maxillary and mandibular molars are recorded. The Indian Knoll dentition is larger than many modern groups but smaller than Australoid or Mesolithic groups. With the exception of maxillary 12, males have larger teeth than females in both dimensions. The lower canine is the most dimorphic tooth. Through rank order correlation, an association was shown between the sexual dimorphism of the mesiodistal and buccolingual dimensions. Compared to modern groups, the Indian Knoll population displays a moderate degree of sexual dimorphism in tooth size. In general, the coefficients of variation were greater for the more distal teeth within morphological classes. Amounts of size variability did not differ significantly between the sexes; moreover, rank order correlations indicated that patterns of variability in both dimensions were similar for males and females. The predominant cusp number pattern for upper molars is 4-3-3 and for lowers 5-5(4)-5. No sex differences were shown for cusp occurrence or bilateral asymmetry in cusp number.     

An odontometric analysis of the early Griqua dentition

The teeth of 28 Griqua skeletons were subjected to odontometric analysis. Significant sexual dimorphism in tooth size was demonstrated in canines and molars. Coefficients of variation were generally greater in the more distal tooth within morphological classes. Rank order correlations suggest similar patterns of variability in males and females. Comparisons of the Griqua dentition with similar populations were made.     

Third molar agenesis in human prehistoric populations of the Canary Islands

The occurrence of third molar agenesis was recorded in a sample of 1,492 maxillary and 1,718 mandibular arches belonging to the prehistoric settlers of the Gan Canaria, Tenerife, and La Gomera Islands (Canary Islands). There were significant sex differences only in the Tenerife sample for the maxilla, the incidence in females being higher than in males. In the Gran Canaria sample, the total frequency (male and female combined) of third molar agenesis (individual count method) was 8.7% for the maxilla and 9.3% for the mandible. In the Tenerife and La Gomera samples, the frequencies were 11.1% and 10.7% for the maxilla and 14.6% and 13.3% for the mandible. In the Tenerife sample, the differences between both jaws were statistically significant. The incidence of missing third molars in the mandible was significantly higher in Tenerife than in Gran Canaria, but the other sample differences were statistically nonsignificant. Bilateral absence of third molars was observed in about two-thirds of the specimens examined. Some correlation between both jaws for the occurrence of third molar agenesis was found. The hypotheses that have been proposed in order to explain third molar agenesis in man are discussed. It is suggested that the loss of the third molar in Homo sapiens could be produced by a heterochronic phenomenon of postdisplacement, as a consequence of the phylogenetic tendency toward the delay of the onset of the third molar formation, and that the genetic factors responsible for the absence of these teeth could be related to the general process of delay in tooth formation.     

Dental morphology of Jews from Yemen and Cochin

60 dental plaster casts of Jewish adolescents, half of them children of immigrants from Yemen and half of them from Cochin (India), were investigated as to tooth measurements and morphologic traits. Each group was composed of an equal number of males and females. Cochini showed a sex specific dimorphism in tooth size, a relatively larger bucco-lingual diameter of upper and lower first premolars, lower frequency of Carabelli's tuberculum and in males larger tooth measurements than their Yemenite counterparts. The variability of ²I² was significantly higher in females than in males, and in Yemenite girls than in Cochini. The molar patterns were similar in both groups with regard to number and development of cusps and occlusal form of the mandibular molars.     

WNT10A variants are associated with non-syndromic tooth agenesis in the general population

Tooth agenesis is the most common developmental dental anomaly. Absence of one or two permanent teeth is found in the majority of affected subjects. Very few patients suffer severe tooth agenesis. Recent studies revealed that WNT10A gene mutations caused syndromic and isolated severe tooth agenesis. In this study, to determine the contribution of WNT10A variants in different severities of tooth agenesis, we investigated the association between WNT10A variants and non-syndromic tooth agenesis in a Chinese population consisting of 505 tooth agenesis patients and 451 normal controls. Twenty-three novel non-synonymous variants were identified. WNT10A variants were detected in 15.8 % (75/474) of patients with 1–3 missing teeth and 51.6 % (16/31) of patients with 4 or more missing teeth. As compared with a frequency of 3.1 % in individuals with full dentition, variant allele frequencies were significantly elevated in both groups with tooth agenesis (p values of 1.00 × 10^?6 and 3.89 × 10^?23, respectively). Our findings showed that WNT10A variants were associated with non-syndromic tooth agenesis from mild to severe tooth agenesis, and the more severe tooth agenesis, the stronger association. Biallelic genotypes of WNT10A variants may have a pathogenic effect on tooth development. Presence of a single variant allele would be predisposing for causation with low penetrance. Together with WNT10A variant, there should be other genetic or environmental factors leading to biallelic variant-related variable clinical manifestations and single allele variant-related low penetrance. The frequent missing tooth positions in the WNT10A-related cases were consistent with that in the general population, suggesting WNT10A plays a critically important role in the etiology of general tooth agenesis.     

Development and size of the teeth of Macaca mulatta.

A cross-sectional sample of 151 skulls from Macaca mulatta of known age and similar rearing in U.S. Primate Centers was analyzed to determine age-related "norms" of stages of development and size of teeth. The stages of development from the follicle of a deciduous incisor in the fetus to completion of the root with apex closed of the permanent third molar were related to age. The age range observed for eruption of each tooth was noted and related to its stage of development. The crown of each erupted tooth was found to be completely developed, but growth of its root continued for a longer, indeterminate period. When a deciduous tooth was exfoliated, the crown of the permanent successor was found to be completed and root growth had begun. Measurements of both mesiodistal and faciolingual diameters and of crown length of the teeth in situ and of total length and root length on roentgenograms were examined for sexual dimorphism. The faciolingual diameter of the deciduous mandibular second incisor and of both second molars showed the greatest sexual dimorphism among both diameters of all deciduous teeth. The mesiodistal and faciolingual diameters of the mandibular premolars were found to be the best dimensions in discriminant functions for identifying sex in the absence of permanent canines.     

Congenital defects of the upper lateral incisors (ULI): Condition and measurements of the other teeth,measurements of the superior arch,head and face

We surveyed a French male population for the incidence of missing or reduced upper lateral incisors (ULI). In 5,738 subjects, we observed an incidence of 1.59% with one or two reduced ULI (the other normal) and 1.90% with one or two missing ULI (the other normal or reduced), altogether, 3.49% affected subjects. Furthermore, 250 random controls were observed. Agenesis of other teeth is more frequent in propositi. Missing third molars were 12.4% in controls, 24.0% in propositi with reduced ULI and 39.6% in propositi with two missing ULI. Furthermore, agenesis of incisors, canines and premolars ranges from 0.4% in controls to 1.3% in propositi having reduced ULI and 5.0% in propositi with two missing ULI. So, propositi with reduced ULI are intermediate between the controls and the propositi with missing ULI with respect to the frequency of agenesis of other teeth. On the other hand, a different ranking is observed with respect to the teeth measurements: reduction of tooth size is more marked in propositi with reduced ULI than in propositi with missing ULI. The reduction mainly affects canines, incisors and to a lesser degree, premolars. Arch length and interpremolar diameters are smaller in propositi with missing ULI, compared with controls.     

第三臼齿退化及其在人类演化上的意义

对第三臼齿退化在世界范围内各人类群体分类数据的分析表明：人类第三臼齿先天缺失是伴随整个人类进化而发生的牙齿退化现象的一部分,这一特片在居住于不同的地理区域的人类始发的时间及增加的速率不尽一致。     

Testing functional and morphological interpretations of enamel thickness along the deciduous tooth row in human children

The significance of a gradient in enamel thickness along the human permanent molar row has been debated in the literature. Some attribute increased enamel thickness from first to third molars to greater bite force during chewing. Others argue that thicker third molar enamel relates to a smaller crown size facilitated by a reduced dentin component. Thus, differences in morphology, not function, explains enamel thickness. This study draws on these different interpretive models to assess enamel thickness along the entire human deciduous tooth row. Average enamel thickness (AET), the area and proportion of crown enamel and dentin, and a crown size proxy are calculated for incisors, canines, and molars. Allometric scaling relationships are assessed within each tooth class, and then comparisons are undertaken along the row. Generally, AET was correlated with crown size and scaled with isometry, except for second molars which scaled with positive allometry. Mean AET increased along the row and was greater on molars, where bite forces are reported to be higher. Second molars combined the largest crown size with the thickest enamel and the smallest proportion of dentin, which is consistent with a reduction in the potential for cusp fracture under high bite forces. Resistance to wear may also account for some enamel thickness variation between tooth classes. Dental reduction did not explain the trend in AET from central to lateral incisors, or from first to second molars. The gradient in AET along the deciduous tooth row is partly consistent with a functional interpretation of enamel thickness. Am J Phys Anthropol 151:518–525, 2013. © 2013 Wiley Periodicals, Inc.     

Mutations in AXIN2 cause familial tooth agenesis and predispose to colorectal cancer

Wnt signaling regulates embryonic pattern formation and morphogenesis of most organs. Aberrations of regulation of Wnt signaling may lead to cancer. Here, we have used positional cloning to identify the causative mutation in a Finnish family in which severe permanent tooth agenesis (oligodontia) and colorectal neoplasia segregate with dominant inheritance. Eleven members of the family lacked at least eight permanent teeth, two of whom developed only three permanent teeth. Colorectal cancer or precancerous lesions of variable types were found in eight of the patients with oligodontia. We show that oligodontia and predisposition to cancer are caused by a nonsense mutation, Arg656Stop, in the Wnt-signaling regulator AXIN2. In addition, we identified a de novo frameshift mutation 1994-1995insG in AXIN2 in an unrelated young patient with severe tooth agenesis. Both mutations are expected to activate Wnt signaling. The results provide the first evidence of the importance of Wnt signaling for the development of dentition in humans and suggest that an intricate control of Wnt-signal activity is necessary for normal tooth development, since both inhibition and stimulation of Wnt signaling may lead to tooth agenesis. Our findings introduce a new gene for hereditary colorectal cancer and suggest that tooth agenesis may be an indicator of cancer susceptibility.     

Sexual dimorphism in modern human permanent teeth

On average, males possess larger tooth crowns than females in contemporary human populations, although the degree of dimorphism varies within different populations. In previous studies, different amounts of either enamel or dentine were implicated as the cause of this dimorphism. In this study, we attempt to determine the nature of sexual dimorphism in the crowns of permanent modern human teeth and to determine if two contrasting tooth types (permanent third molars and canines) show identical patterns of dimorphism in enamel and dentine distribution. We estimated the relative contributions of both enamel and dentine to total crown size, from buccolingual sections of teeth. Our sample consisted of a total of 144 mandibular permanent third molars and 25 permanent mandibular canines of known sex. We show that sexual dimorphism is likely due, in part, to the presence of relatively more dentine in the crowns of male teeth. However, whatever the underlying cause, dimorphism in both tooth root and tooth crown size should produce measurable dimorphism in tooth weight, though this has not been previously explored. Therefore, we provide some preliminary data that indicate the usefulness of wet tooth weight as a measure of sexual dimorphism. Both male permanent third molars and canines are significantly heavier than those of females. The weight dimorphism reported here for both classes of teeth may prove a useful finding for future forensic studies. In particular, weights of canines may be more useful as a means of sexing modern human skeletal material than linear or area measurements of teeth.