A Nuclear Family A DNA Polymerase from Entamoeba histolytica Bypasses Thymine Glycol

Background

Eukaryotic family A DNA polymerases are involved in mitochondrial DNA replication or translesion DNA synthesis. Here, we present evidence that the sole family A DNA polymerase from the parasite protozoan E. histolytica (EhDNApolA) localizes to the nucleus and that its biochemical properties indicate that this DNA polymerase may be involved in translesion DNA synthesis.

Methodology and Results

EhDNApolA is the sole family A DNA polymerase in E. histolytica. An in silico analysis places family A DNA polymerases from the genus Entamoeba in a separate branch of a family A DNA polymerases phylogenetic tree. Biochemical studies of a purified recombinant EhDNApolA demonstrated that this polymerase is active in primer elongation, is poorly processive, displays moderate strand displacement, and does not contain 3′–5′ exonuclease or editing activity. Importantly, EhDNApolA bypasses thymine glycol lesions with high fidelity, and confocal microscopy demonstrates that this polymerase is translocated into the nucleus. These data suggest a putative role of EhDNApolA in translesion DNA synthesis in E. histolytica.

Conclusion

This is the first report of the biochemical characterization of a DNA polymerase from E. histolytica. EhDNApolA is a family A DNA polymerase that is grouped into a new subfamily of DNA polymerases with translesion DNA synthesis capabilities similar to DNA polymerases from subfamily ν.     

Enhancing the processivity of a family B-type DNA polymerase of Thermococcus onnurineus and application to long PCR

Mechanisms that allow replicative DNA polymerases to attain high processivity are often specific to a given polymerase and cannot be generalised to others. Amplification efficiency is lower in family B-type DNA polymerases than in family A-type (Taq) polymerases because of their strong 3′–5′ exonuclease-activity. Here, we have red the exonuclease domain of the Thermococcus onnurineus NA1 (TNA1) DNA polymerase, especially Asn210 to Asp215 residues in Exo II motif (NXXXFD), to improve the processivity. N213D mutant protein had higher processivity and extension rate than the wild-type TNA1 DNA polymerase, retaining a lower mutation frequency than recombinant Taq DNA polymerase. Consequently, the N213D mutant could amplify target DNA up to 13.5 kb in length from human genomic DNA and 16.2 kb in length from human mitochondrial DNA while wild-type TNA1 amplified target DNA of 2.7 kb in length from human genomic DNA.     

Replication through an abasic DNA lesion: structural basis for adenine selectivity

Abasic sites represent the most frequent DNA lesions in the genome that have high mutagenic potential and lead to mutations commonly found in human cancers. Although these lesions are devoid of the genetic information, adenine is most efficiently inserted when abasic sites are bypassed by DNA polymerases, a phenomenon termed A‐rule. In this study, we present X‐ray structures of a DNA polymerase caught while incorporating a nucleotide opposite an abasic site. We found that a functionally important tyrosine side chain directs for nucleotide incorporation rather than DNA. It fills the vacant space of the absent template nucleobase and thereby mimics a pyrimidine nucleobase directing for preferential purine incorporation opposite abasic residues because of enhanced geometric fit to the active site. This amino acid templating mechanism was corroborated by switching to pyrimidine specificity because of mutation of the templating tyrosine into tryptophan. The tyrosine is located in motif B and highly conserved throughout evolution from bacteria to humans indicating a general amino acid templating mechanism for bypass of non‐instructive lesions by DNA polymerases at least from this sequence family.     

Functional Importance of Bacteriophage ?29 DNA Polymerase Residue Tyr148 in Primer-terminus Stabilisation at the 3′-5′ Exonuclease Active Site

Recent crystallographic resolution of ?29 DNA polymerase complexes with ssDNA at its 3′-5′ exonuclease active site has allowed the identification of residues Pro129 and Tyr148 as putative ssDNA ligands, the latter being conserved in the Kx₂h motif of proofreading family B DNA polymerases. Single substitution of ?29 DNA polymerase residue Tyr148 to Ala rendered an enzyme with a reduced capacity to stabilize the binding of the primer terminus at the 3′-5′ exonuclease active site, not having a direct role in the catalysis of the reaction. Analysis of the 3′-5′ exonuclease on primer/template structures showed a critical role for residue Tyr148 in the proofreading of DNA polymerisation errors. In addition, Tyr148 is not involved in coupling polymerisation to strand displacement in contrast to the catalytic residues responsible for the exonuclease reaction, its role being restricted to stabilisation of the frayed 3′ terminus at the exonuclease active site. Altogether, the results lead us to extend the consensus sequence of the above motif of proofreading family B DNA polymerases into Kx₂hxA. The different solutions adopted by proofreading DNA polymerases to stack the 3′ terminus at the exonuclease site are discussed. In addition, the results obtained with mutants at ?29 DNA polymerase residue Pro129 allow us to rule out a functional role as ssDNA ligand for this residue.     

Enhanced PCR efficiency of high-fidelity DNA polymerase from Thermococcus waiotapuensis

Twa DNA polymerase from hyperthermophilic archaeon Thermococcus waiotapuensis has exceedingly high fidelity among family B DNA polymerases. However, Twa DNA polymerase has significant shortcomings in terms of a low extension rate and poor processivity. To resolve these weaknesses, we focused on two amino acid residues (N565 and H633) in the palm and thumb subdomains of the Twa DNA polymerase. These two residues were replaced by site-directed mutagenesis and the enzymatic properties of the mutants were analyzed. Here, Twa H633R DNA polymerase showed significantly improved polymerase function compared to wild-type Twa DNA polymerase in terms of processivity (2-fold), extension rate (1.5-fold) and PCR efficiency. Kinetic analysis using DNA as a template revealed that the k_cat value of the Twa H633R mutant was similar to that of wild-type, but the K_m of the Twa H633R mutant was about 1.6-fold lower than that of the wild-type. These results showed that the Arg residue substitution at H633 located in the thumb subdomain has a positive effect on processivity, extension rate and PCR efficiency, suggesting that the Twa H633R mutant allows a conformational change for easy access of the primer-template to the binding site of the polymerase domain.     

Insights into strand displacement and processivity from the crystal structure of the protein-primed DNA polymerase of bacteriophage phi29

The DNA polymerase from phage phi29 is a B family polymerase that initiates replication using a protein as a primer, attaching the first nucleotide of the phage genome to the hydroxyl of a specific serine of the priming protein. The crystal structure of phi29 DNA polymerase determined at 2.2 A resolution provides explanations for its extraordinary processivity and strand displacement activities. Homology modeling suggests that downstream template DNA passes through a tunnel prior to entering the polymerase active site. This tunnel is too small to accommodate double-stranded DNA and requires the separation of template and nontemplate strands. Members of the B family of DNA polymerases that use protein primers contain two sequence insertions: one forms a domain not previously observed in polymerases, while the second resembles the specificity loop of T7 RNA polymerase. The high processivity of phi29 DNA polymerase may be explained by its topological encirclement of both the downstream template and the upstream duplex DNA.     

Evaluation of the role of the vaccinia virus uracil DNA glycosylase and A20 proteins as intrinsic components of the DNA polymerase holoenzyme

The vaccinia virus DNA polymerase is inherently distributive but acquires processivity by associating with a heterodimeric processivity factor comprised of the viral A20 and D4 proteins. D4 is also an enzymatically active uracil DNA glycosylase (UDG). The presence of an active repair protein as an essential component of the polymerase holoenzyme is a unique feature of the replication machinery. We have shown previously that the A20-UDG complex has a stoichiometry of ～1:1, and our data suggest that A20 serves as a bridge between polymerase and UDG. Here we show that conserved hydrophobic residues in the N' terminus of A20 are important for its binding to UDG. Our data argue against the assembly of D4 into higher order multimers, suggesting that the processivity factor does not form a toroidal ring around the DNA. Instead, we hypothesize that the intrinsic, processive DNA scanning activity of UDG tethers the holoenzyme to the DNA template. The inclusion of UDG as an essential holoenzyme component suggests that replication and base excision repair may be coupled. Here we show that the DNA polymerase can utilize dUTP as a substrate in vitro. Moreover, uracil moieties incorporated into the nascent strand during holoenzyme-mediated DNA synthesis can be excised by the viral UDG present within this holoenzyme, leaving abasic sites. Finally, we show that the polymerase stalls upon encountering an abasic site in the template strand, indicating that, like many replicative polymerases, the poxviral holoenzyme cannot perform translesion synthesis across an abasic site.     

A novel strategy to engineer DNA polymerases for enhanced processivity and improved performance in vitro

Mechanisms that allow replicative DNA polymerases to attain high processivity are often specific to a given polymerase and cannot be generalized to others. Here we report a protein engineering-based approach to significantly improve the processivity of DNA polymerases by covalently linking the polymerase domain to a sequence non-specific dsDNA binding protein. Using Sso7d from Sulfolobus solfataricus as the DNA binding protein, we demonstrate that the processivity of both family A and family B polymerases can be significantly enhanced. By introducing point mutations in Sso7d, we show that the dsDNA binding property of Sso7d is essential for the enhancement. We present evidence supporting two novel conclusions. First, the fusion of a heterologous dsDNA binding protein to a polymerase can increase processivity without compromising catalytic activity and enzyme stability. Second, polymerase processivity is limiting for the efficiency of PCR, such that the fusion enzymes exhibit profound advantages over unmodified enzymes in PCR applications. This technology has the potential to broadly improve the performance of nucleic acid modifying enzymes.     

Translesion Synthesis of Abasic Sites by Yeast DNA Polymerase ?

Studies of replicative DNA polymerases have led to the generalization that abasic sites are strong blocks to DNA replication. Here we show that yeast replicative DNA polymerase ϵ bypasses a model abasic site with comparable efficiency to Pol η and Dpo4, two translesion polymerases. DNA polymerase ϵ also exhibited high bypass efficiency with a natural abasic site on the template. Translesion synthesis primarily resulted in deletions. In cases where only a single nucleotide was inserted, dATP was the preferred nucleotide opposite the natural abasic site. In contrast to translesion polymerases, DNA polymerase ϵ with 3′–5′ proofreading exonuclease activity bypasses only the model abasic site during processive synthesis and cannot reinitiate DNA synthesis. This characteristic may allow other pathways to rescue leading strand synthesis when stalled at an abasic site.     

phi 29 DNA polymerase residue Leu384, highly conserved in motif B of eukaryotic type DNA replicases,is involved in nucleotide insertion fidelity

Replicative DNA polymerases achieve insertion fidelity by geometric selection of a complementary nucleotide followed by induced fit: movement of the fingers subdomain toward the active site to enclose the incoming and templating nucleotides generating a binding pocket for the nascent base pair. Several residues of motif B of DNA polymerases from families A and B, localized in the fingers subdomain, have been described to be involved in template/primer binding and dNTP selection. Here we complete the analysis of this motif, which has the consensus "KLX2NSXYG" in DNA polymerases from family B, characterized by mutational analysis of conserved leucine, Leu384 of phi 29 DNA polymerase. Mutation of Leu384 into Arg resulted in a phi 29 DNA polymerase with reduced nucleotide insertion fidelity during DNA-primed polymerization and protein-primed initiation reactions. However, the mutation did not alter the intrinsic affinity for the different dNTPs, as shown in the template-independent terminal protein-deoxynucleotidylation reaction. We conclude that Leu384 of phi 29 DNA polymerase plays an important role in positioning the templating nucleotide at the polymerization active site and in controlling nucleotide insertion fidelity. This agrees with the localization of the corresponding residue in the closed ternary complexes of family A and family B DNA polymerases, contributing to form the binding pocket for the nascent base pair. As an additional effect, mutant polymerase L384R was strongly reduced in DNA binding, resulting in reduced processivity during polymerization.     

The processivity factor β controls DNA polymerase IV traffic during spontaneous mutagenesis and translesion synthesis in vivo

The dinB-encoded DNA polymerase IV (Pol IV) belongs to the recently identified Y-family of DNA polymerases. Like other members of this family, Pol IV is involved in translesion synthesis and mutagenesis. Here, we show that the C-terminal five amino acids of Pol IV are essential in targeting it to the β-clamp, the processivity factor of the replicative DNA polymerase (Pol III) of Escherichia coli. In vivo, the disruption of this interaction obliterates the function of Pol IV in both spontaneous and induced mutagenesis. These results point to the pivotal role of the processivity clamp during DNA polymerase trafficking in the vicinity of damaged-template DNA.     

Structural and biochemical investigation of the role in proofreading of a beta hairpin loop found in the exonuclease domain of a replicative DNA polymerase of the B family

Replicative DNA polymerases, as exemplified by the B family polymerases from bacteriophages T4 and RB69, not only replicate DNA but also have the ability to proofread misincorporated nucleotides. Because the two activities reside in separate protein domains, polymerases must employ a mechanism that allows for efficient switching of the primer strand between the two active sites to achieve fast and accurate replication. Prior mutational and structural studies suggested that a beta hairpin structure located in the exonuclease domain of family B polymerases might play an important role in active site switching in the event of a nucleotide misincorporation. We show that deleting the beta hairpin loop in RB69 gp43 affects neither polymerase nor exonuclease activities. Single binding event studies with mismatched primer termini, however, show that the beta hairpin plays a role in maintaining the stability of the polymerase/DNA interactions during the binding of the primer DNA in the exonuclease active site but not on the return of the corrected primer to the polymerase active site. In addition, the deletion variant showed a more stable incorporation of a nucleotide opposite an abasic site. Moreover, in the 2.4 A crystal structure of the beta hairpin deletion variant incorporating an A opposite a templating furan, all four molecules in the crystal asymmetric unit have DNA in the polymerase active site, despite the presence of DNA distortions because of the misincorporation, confirming that the primer strand is not stably bound within the exonuclease active site in the absence of the beta hairpin loop.     

Switching between polymerase and exonuclease sites in DNA polymerase ε

The balance between exonuclease and polymerase activities promotes DNA synthesis over degradation when nucleotides are correctly added to the new strand by replicative B-family polymerases. Misincorporations shift the balance toward the exonuclease site, and the balance tips back in favor of DNA synthesis when the incorrect nucleotides have been removed. Most B-family DNA polymerases have an extended β-hairpin loop that appears to be important for switching from the exonuclease site to the polymerase site, a process that affects fidelity of the DNA polymerase. Here, we show that DNA polymerase ε can switch between the polymerase site and exonuclease site in a processive manner despite the absence of an extended β-hairpin loop. K967 and R988 are two conserved amino acids in the palm and thumb domain that interact with bases on the primer strand in the minor groove at positions n−2 and n−4/n−5, respectively. DNA polymerase ε depends on both K967 and R988 to stabilize the 3′-terminus of the DNA within the polymerase site and on R988 to processively switch between the exonuclease and polymerase sites. Based on a structural alignment with DNA polymerase δ, we propose that arginines corresponding to R988 might have a similar function in other B-family polymerases.     

Crystal structure of a DinB lesion bypass DNA polymerase catalytic fragment reveals a classic polymerase catalytic domain.

The UmuC/DinB family of bypass polymerases is responsible for translesion DNA synthesis and includes the human polymerases eta, iota, and kappa. We determined the 2.3 A resolution crystal structure of a catalytic fragment of the DinB homolog (Dbh) polymerase from Sulfolobus solfataricus and show that it is nonprocessive and can bypass an abasic site. The structure of the catalytic domain is nearly identical to those of most other polymerase families. Homology modeling suggests that there is minimal contact between protein and DNA, that the nascent base pair binding pocket is quite accessible, and that the enzyme is already in a closed conformation characteristic of ternary polymerase complexes. These observations afford insights into the sources of low fidelity and low processivity of the UmuC/DinB polymerases.     

A real-time fluorescence method for enzymatic characterization of specialized human DNA polymerases

Specialized DNA polymerases are involved in DNA synthesis during base-excision repair and translesion synthesis across a wide range of chemically modified DNA templates. Notable features of these enzymes include low catalytic efficiency, low processivity and low fidelity. Traditionally, in vitro studies of these enzymes have utilized radiolabeled substrates and gel electrophoretic separation of products. We have developed a simple homogeneous fluorescence-based method to study the enzymology of specialized DNA polymerases in real time. The method is based on fluorescent reporter strand displacement from a tripartite substrate containing a quencher-labeled template strand, an unlabeled primer and a fluorophore-labeled reporter. With this method, we could follow the activity of human DNA polymerases β, η, ι and κ under different reaction conditions, and we investigated incorporation of the aberrant nucleotide, 8-oxodGTP, as well as bypass of an abasic site or 8-oxoG DNA template lesion in different configurations. Lastly, we demonstrate that the method can be used for small molecule inhibitor discovery and characterization in highly miniaturized settings, and we report the first nanomolar inhibitors of Y-family DNA polymerases ι and η. The fluorogenic method presented here should facilitate mechanistic and inhibitor investigations of these polymerases and is also applicable to the study of highly processive replicative polymerases.     

Structural basis for recruitment of translesion DNA polymerase Pol IV/DinB to the beta-clamp

Y-family DNA polymerases can extend primer strands across template strand lesions that stall replicative polymerases. The poor processivity and fidelity of these enzymes, key to their biological role, requires that their access to the primer-template junction is both facilitated and regulated in order to minimize mutations. These features are believed to be provided by interaction with processivity factors, beta-clamp or proliferating cell nuclear antigen (PCNA), which are also essential for the function of replicative DNA polymerases. The basis for this interaction is revealed by the crystal structure of the complex between the 'little finger' domain of the Y-family DNA polymerase Pol IV and the beta-clamp processivity factor, both from Escherichia coli. The main interaction involves a C-terminal peptide of Pol IV, and is similar to interactions seen between isolated peptides and other processivity factors. However, this first structure of an entire domain of a binding partner with an assembled clamp reveals a substantial secondary interface, which maintains the polymerase in an inactive orientation, and may regulate the switch between replicative and Y-family DNA polymerases in response to a template strand lesion.     

Caught bending the A-rule: crystal structures of translesion DNA synthesis with a non-natural nucleotide

Damage to DNA involving excision of the nucleobase at the N-glycosidic bond forms abasic sites. If a nucleotide becomes incorporated opposite an unrepaired abasic site during DNA synthesis, most B family polymerases obey the A-rule and preferentially incorporate dAMP without instruction from the template. In addition to being potentially mutagenic, abasic sites provide strong blocks to DNA synthesis. A previous crystal structure of an exonuclease deficient variant of the replicative B family DNA polymerase from bacteriophage RB69 (RB69 gp43 exo-) illustrated these properties, showing that the polymerase failed to translocate the DNA following insertion of dAMP opposite an abasic site. We examine four new structures depicting several steps of translesion DNA synthesis by RB69 gp43 exo-, employing a non-natural purine triphosphate analogue, 5-nitro-1-indolyl-2'-deoxyriboside-5'-triphosphate (5-NITP), that is incorporated more efficiently than dAMP opposite abasic sites. Our structures indicate that a dipole-induced dipole stacking interaction between the 5-nitro group and base 3' to the templating lesion explains the enhanced kinetics of 5-NITP. As with dAMP, the DNA fails to translocate following insertion of 5-NIMP, although distortions at the nascent primer terminus contribute less than previously thought in inducing the stall, given that 5-NIMP preserves relatively undistorted geometry at the insertion site following phosphoryl transfer. An open ternary configuration, novel in B family polymerases, reveals an initial template independent binding of 5-NITP adjacent to the active site of the open polymerase, suggesting that closure of the fingers domain shuttles the nucleotide to the active site while testing the substrate against the template.     

A euryarchaeal histone modulates strand displacement synthesis by replicative DNA polymerases

Euryarchaeota and Crenarchaeota, the two main lineages of the domain Archaea, encode different chromatin proteins and differ in the use of replicative DNA polymerases. Crenarchaea possess a single family B DNA polymerase (PolB), which is capable of strand displacement modulated by the chromatin proteins Cren7 and Sul7d. Euryarchaea have two distinct replicative DNA polymerases, PolB and PolD, a family D DNA polymerase. Here we characterized the strand displacement activities of PolB and PolD from the hyperthermophilic euryarchaeon Pyrococcus furiosus and investigated the influence of HPfA1, a homolog of eukaryotic histones from P. furiosus, on these activities. We showed that both PolB and PolD were efficient in strand displacement. HPfA1 inhibited DNA strand displacement by both DNA polymerases but exhibited little effect on the displacement of a RNA strand annealed to single-stranded template DNA. This is consistent with the finding that HPfA1 bound more tightly to double-stranded DNA than to a RNA:DNA hybrid. Our results suggest that, although crenarchaea and euryarchaea differ in chromosomal packaging, they share similar mechanisms in modulating strand displacement by DNA polymerases during lagging strand DNA synthesis.     

Translesion replication by DNA polymerase delta depends on processivity accessory proteins and differs in specificity from DNA polymerase beta

Mutations caused by DNA damage lead to the development of cancer. The critical step in the formation of these mutations is the replication of unrepaired lesions in DNA by DNA polymerases, a process termed translesion replication. Using a newly developed method for preparation of gapped plasmids, containing a site-specific synthetic abasic site, we analyzed translesion replication with purified mammalian DNA polymerases delta and beta. DNA polymerase delta was found to be unable to replicate through the abasic site. Addition of the sliding DNA clamp PCNA, the clamp loader RFC, and ATP caused a drastic 30-fold increase in translesion replication. Thus, similar to Escherichia coli DNA polymerase III, the processivity accessory proteins enable DNA polymerase delta to bypass blocking lesions. Under comparable conditions, DNA polymerase beta was unable to bypass the abasic site, unless its concentration was greatly increased. Analysis of translesion replication products revealed a marked difference in the specificity of bypass: whereas 90% of bypass events by DNA polymerase delta holoenzyme involved insertion of a dAMP residue opposite the abasic site, DNA polymerase beta tended to skip over the abasic site, producing mainly minus frameshifts (73%). The significance of these results for in vivo translesion replication is discussed.     

Two Modes of Interaction of the Single-stranded DNA-binding Protein of Bacteriophage T7 with the DNA Polymerase-Thioredoxin Complex

The DNA polymerase encoded by bacteriophage T7 has low processivity. Escherichia coli thioredoxin binds to a segment of 76 residues in the thumb subdomain of the polymerase and increases the processivity. The binding of thioredoxin leads to the formation of two basic loops, loops A and B, located within the thioredoxin-binding domain (TBD). Both loops interact with the acidic C terminus of the T7 helicase. A relatively weak electrostatic mode involves the C-terminal tail of the helicase and the TBD, whereas a high affinity interaction that does not involve the C-terminal tail occurs when the polymerase is in a polymerization mode. T7 gene 2.5 single-stranded DNA-binding protein (gp2.5) also has an acidic C-terminal tail. gp2.5 also has two modes of interaction with the polymerase, but both involve the C-terminal tail of gp2.5. An electrostatic interaction requires the basic residues in loops A and B, and gp2.5 binds to both loops with similar affinity as measured by surface plasmon resonance. When the polymerase is in a polymerization mode, the C terminus of gene 2.5 protein interacts with the polymerase in regions outside the TBD. gp2.5 increases the processivity of the polymerase-helicase complex during leading strand synthesis. When loop B of the TBD is altered, abortive DNA products are observed during leading strand synthesis. Loop B appears to play an important role in communication with the helicase and gp2.5, whereas loop A plays a stabilizing role in these interactions.