Tetanus Toxin and Antigenic Derivatives II. Effect of Protein and Formaldehyde Concentration on Toxoid Formation

Tetanus toxoid formation was examined under varying conditions. Products of the reaction depended upon the concentration of both formaldehyde and toxin. High concentrations of protein and formaldehyde favored the formation of large polymers, whereas low concentrations yielded smaller polymers and monomer. The monomer had an observed S value of 7.1, whereas the polymers ranged from 10.1S to 110S. The cross-linking between toxin molecules to form toxoid polymers appeared to be random.     

The relationship between surface tension and the industrial performance of water-soluble polymers prepared from acid hydrolysis lignin, a saccharification by-product from woody materials

In this study, water-soluble anionic and cationic polymers were prepared from sulfuric acid lignin (SAL), an acid hydrolysis lignin, and the relationship between the surface tension of these polymers and industrial performance was examined. The SAL was phenolized (P-SAL) to enhance its solubility and reactivity. Sulfonation and the Mannich reaction with aminocarboxylic acids produced water-soluble anionic polymers and high-dispersibility gypsum paste. The dispersing efficiency increased as the surface tension decreased, suggesting that the fluidity of the gypsum paste increased with the polymer adsorption on the gypsum particle surface. Water-soluble cationic polymers were prepared using the Mannich reaction with dimethylamine. The cationic polymers showed high sizing efficiency under neutral papermaking conditions; the sizing efficiency increased with the surface tension. This suggests that the polymer with high hydrophilicity spread in the water and readily adhered to the pulp surface and the rosin, showing good retention.     

Efficient biomimetic catalytic epoxidation of polyene polymers by manganese porphyrins

Two polyene polymers, cis-polybutadiene and cis-polyisoprene, were transformed into polyepoxides under mild conditions. The epoxidation of these two polyene polymers is stereospecific, giving cis-epoxides as products. All factors controlling the reaction rate, such as the nature of the catalyst, the oxygen donor and the presence of bases as axial ligands, were studied. The optimum results were obtained when iodosylbenzene was used as the oxygen donor, Mn(TpFPP)Cl as the catalyst and imidazole as the axial ligand. Under these optimum conditions the turnover number was found to be 71. These results render this system promising for the epoxidation of polyene polymers in a more general way.     

Effects of macromolecular crowding on the association of E. coli ribosomal particles.

The equilibrium for the binding reaction between the 30 S and 50 S ribosomal subunits of E. coli is shifted towards formation of 70 S ribosomes in the presence of a variety of polymers. The polymers also increase a further interaction between 70 S particles to form the 100 S dimer. The requirement for relatively high concentrations of non-specific polymers indicates that the shifts in equilibria arise from excluded volume effects. Analysis using scaled particle theory is consistent with this mechanism. The effects of high concentrations of polymers on the interactions between ribosomal species may make important changes in the function of ribosomes under the crowded conditions which occur in vivo.     

Synthesis and characterization of biodegradable peptide-based polymers prepared by microwave-assisted click chemistry

In this study, the microwave-assisted copper(I)-catalyzed 1,3-dipolar cycloaddition reaction was used to synthesize peptide triazole-based polymers from two novel peptide-based monomers: azido-phenylalanyl-alanyl-lysyl-propargyl amide (1) and azido-phenylalanyl-alanyl-glycolyl-lysyl-propargyl amide (2). The selected monomers have sites for enzymatic degradation as well as for chemical hydrolysis to render the resulting polymer biodegradable. Depending on the monomer concentration in DMF, the molecular mass of the polymers could be tailored between 4.5 and 13.9 kDa (corresponding with 33-100 amino acid residues per polymer chain). As anticipated, both polymers can be enzymatically degraded by trypsin and chymotrypsin, whereas the ester bond in the polymer of 2 undergoes chemical hydrolysis under physiological conditions, as was shown by a ninhydrin-based colorimetric assay and MALDI-TOF analysis. In conclusion, the microwave-assisted copper(I)-catalyzed 1,3-dipolar cycloaddition reaction is an effective tool for synthesizing biodegradable peptide polymers, and it opens up new approaches toward the synthesis of (novel) designed biomedical materials.     

Cross linking of proteins in vitro by peroxidase

The enzyme peroxidase, a substrate (hydrogen donor), and hydrogen peroxide aggregated and polymerized soluble proteins included in the reaction mixture. Gel filtration and acrylamide disk gel electrophoresis revealed newly formed dimers, trimers, and higher protein polymers. Some of the protein polymers withstood the denaturing conditions of dodecyl sulfate disk gel electrophoresis; thus the formation of some covalent cross links was indicated. It is suggested that peroxidase catalyzes the oxidation of hydrogen donors to form free radicals or quinones, which subsequently interact with, cross link, and alter the soluble proteins.     

The effect of the presence of globular proteins and elongated polymers on enzyme activity

We have studied the effect of a crowded (macromolecular) solution on reaction rates of the decarboxylating enzymes urease, pyruvate decarboxylase and glutamate decarboxylase. A variety of crowding agents were used including haemoglobin, lysozyme, various dextrans and polyethylene glycol. Enzyme reaction rates of all three enzymes show two different types of effect that separate the globular proteins from the polysaccharides/polymers. Increasing concentration of globular proteins caused a dramatic rise in enzyme activity up to 30% crowding concentration then the activity decreased, whereas the polymers caused a concentration dependent decrease in activity. The viscosities of the globular proteins were low compared to the polymers. The increased activity with proteins may be due to the decreased amount of free water, which leads to higher effective concentration of substrates, or to an increased oligomeric state by self-association. The lower activities of all enzymes with all agents at high concentrations may be explained by a decrease in rates of diffusion. An increase in protein crowding (decrease in cell water content) may contribute to pathological conditions including cataract and Alzheimer's disease.     

Solubilization of native integral membrane proteins in aqueous buffer by noncovalent chelation with monomethoxy poly(ethylene glycol) (mPEG) polymers

Highly hydrophobic integral membrane proteins (IMPs)are typically purified in excess detergent media, often resulting in rapid inactivation and denaturation of the protein. One promising approach to solve this problem is to couple hydrophilic polymers, such as monomethoxypolyethylene glycol (mPEG) to IMPs under mild conditions in place of detergents. However, the broad application of this approach is hampered by poor reaction efficiencies, low tolerance of detergent stabilized membrane proteins to reaction conditions, and a lack of proper site-specific reversible approaches. Here, we have developed a straightforward, efficient, and mild approach to site-specific noncovalent binding of long-chain polymers to recombinant IMPs. This method uses the hexa-histidine tag (His-Tag) often used for purification of recombinant proteins as an attachment site for mPEGs. Solubility studies performed using five different IMPs confirmed that all tested mPEG-bound IMPs were completely soluble and stable in detergent free aqueous buffer compared to their precipitated native proteins under the identical circumstances. Activity assays and circular dichroism (CD) spectroscopy confirmed the structural integrity of modified IMPs.     

Effect of reaction media concentration on the solubility and the chemical structure of lignin model compounds

In plant cell walls, lignin polymerization occurs in concentrated polysaccharide gel. The effect of high polysaccharide concentrations on the structure of lignin-like polymers (DHPs=dehydrogenation polymers), were investigated by running lignification-like polymerization under three reaction conditions in which the concentrations of all reactants (xylan/coniferyl alcohol (CA)/oxidising system) were gradually increased. Control experiments were also run in similar conditions but without polysaccharides. DHPs showed increased solubility with increased concentrations of reactants in the presence of xylans but were mostly insoluble in buffer control experiments. The structures of DHPs were characterized by thioacidolysis and size exclusion chromatography (SEC). Results indicated that the frequency of beta-alkyl aryl ether bonds and DHP molecular weight increased with increasing concentration of the reaction mixture in the presence of xylans whereas those of control DHPs decreased slightly under the same conditions. This emphasizes the role of the pre-existing polysaccharide gel and high concentrations existing in the cell wall during construction of the lignin polymer.     

Action of beta-galactosidase on novel synthetic macromolecular substrates. A processive enzymic reaction controlled by coulombic interactions

Macromolecular beta-galactosidase substrates were prepared by attaching o-nitrophenyl-beta-galactoside to carboxymethyldextran with positively charged linking groups. Almost all of the substituents were susceptible to enzymic hydrolysis by two distinct pathways. Under some conditions, there was random reaction to give a soluble product. In other conditions, in the initial stages of the reaction, most of the substituents of some, but not all, of the substrate polymers were hydrolyzed to give a product which precipitated as a second aqueous phase. Kinetics of hydrolysis were studied with respect to charge and molecular weight of both the enzyme and substrate. Factors that caused a decrease in Km favored formation of the second phase product. The reaction has similarities to the processive catalytic reactions found in naturally occurring enzyme systems with polymeric charged substrates.     

Mechanism of action of phalloidin on the polymerization of muscle actin

Under conditions where muscle actin only partially polymerizes, or where it does not polymerize at all, a significant enhancement of polymerization was observed if equimolar phalloidin was also present. The increased extent of polymerization in the the presence of phalloidin can be explained by the reduced critical actin concentration of partially polymerized populations at equilibrium. Under such conditions, the rate of polymerization, as judged by the length of time to reach half the viscosity plateau, was found to be essentially independent of the phalloidin concentration. Moreover, the initial rate of polymerization of actin was also found to be independent of phalloidin concentration. However, phalloidin apparently causes a reduction in the magnitude of the reverse rates in the polymerization reaction, as was demonstrated by the lack of depolymerization of phalloidin-treated actin polymers. This effect of phalloidin is also supported by the identification of actin nuclei and short polymers in populations of G-actin incubated with phalloidin in the absence of added KCl. Our conclusion, then, is that phalloidin influences the polymerization of actin by stabilizing nuclei and polymers as they are formed.     

Nucleation of alpha 1-antichymotrypsin polymerization

Alpha(1)-antichymotrypsin is an acute phase plasma protein and a member of the serpin superfamily. We show here that wildtype alpha(1)-antichymotrypsin forms polymers between the reactive center loop of one molecule and the beta-sheet A of a second at a rate that is dependent on protein concentration and the temperature of the reaction. The rate of polymerization was accelerated by seeding with polymers of alpha(1)-antichymotrypsin and a complex of alpha(1)-antichymotrypsin with an exogenous reactive loop peptide but not with reactive loop cleaved alpha(1)-antichymotrypsin or with polymers of other members of the serpin superfamily. Sonication of alpha(1)-antichymotrypsin polymers markedly increased the efficacy of seeding such that polymers were able to form under physiological conditions. Taken together, these data provide the first demonstration that serpin polymerization can result from seeding. This mechanism is analogous to the fibrillization of the Abeta(1-42) peptide and may be important in the deposition of alpha(1)-antichymotrypsin in the plaques of Alzheimer's disease.     

Bioengineering and Application of Novel Glucose Polymers

Abstract

Glucan phosphorylase, branching enzyme, and 4-α-glucanotransferase were employed to produce glucose polymers with controlled molecular size and structures. Linear or branched glucan was produced from glucose-1-phosphate by glucan phosphorylase alone or together with bracnhing enzyme, where the molecular weight of linear glucan was strictly controlled by the glucose-1-phosphate/primer molar ratio, and the branching pattern by the relative branching enzyme/glucan phosphorylase activity ratio. Cyclic glucans were produced by the cyclization reaction of 5-αglucanotransferases and branching enzyme on amylose and amylopectin. Molecular size and structure of cyclic glucan was controlled by the type of enyzyme and substrate chosen and by the reaction conditions. This in vitro approach can be used to manufacture novel glucose polymers with applicable value.     

酶促聚合：绿色的高分子材料合成技术

以酶促聚合为代表的绿色高分子合成途径，以其反应条件温和、产物多分散性低、无金属催化剂残留、高度立体和区位选择性等优势，成为医用高分子材料合成领域中的研究热点。目前，氧化还原酶、水解酶、转移酶均成功应用于聚合反应，其中脂肪酶催化的缩聚反应及开环聚合反应研究最为广泛，同时，以可逆加成-断裂链转移聚合和原子转移自由基聚合为代表的酶促可逆失活自由基聚合得到了快速发展。针对酶促聚合中单体及合成产物结构与性能单一、应用范围有限等缺陷，基于酶促聚合与原子转移自由基聚合、开环易位聚合等反应的偶联，制备了多种不同结构与性能的聚合物材料，推动了上述材料在药物与基因递送领域中的应用。本文综述了脂肪酶催化聚合、酶促可逆失活自由基聚合、酶促化学偶联催化等方面的研究进展，并探讨了目前研究的局限性和未来研究方向。     

Polymerization of polyfunctional macromolecules: synthesis of a new class of high molecular weight poly(amino acid)s by oxidative coupling of phenol-containing precursor polymers

Oxidative coupling of phenol-containing precursor poly(amino acid)s, poly(alpha-glutamine), poly(alpha/beta-asparagine), and poly(gamma-glutamine) derivatives, has been examined to produce a new class of soluble poly(amino acid)s. Under appropriate reaction conditions, the Fe-salen and HRP catalysts efficiently induced the oxidative coupling without formation of insoluble gels, yielding the soluble polymers of high molecular weight. The oxidative coupling behaviors were greatly influenced by the structure and phenol content of the precursor polymer. The selection of the substrate concentration and catalyst amount was crucial for the production of soluble polymers of high molecular weight.     

Preparation of a class of versatile, chemoselective, and amorphous polyketoesters

A straightforward and versatile strategy for preparing a class of biodegradable and amorphous polyketoesters is reported. A series of ketone-containing diesters and diacids were combined with di(ethylene glycol) through condensation polymerization, achieving values of up to 10.1 x 10(3) g/mol. Glass transition temperatures ranged from -41 to -6 degrees C, rendering all of the materials liquid at room temperature. By including ketone groups in the repeat unit, facile postpolymerization modifications were possible by reaction with oxyamine-tethered ligands through the formation of an oxime linkage. Upon reaction with molecules that contain oxyamines, under mild conditions, these polymers can easily have a diverse set of side chains appended without coreagents or catalysts. The chemoselective oxime-forming coupling strategy is compatible with physiological conditions and can be done in the presence of a wide range of functional groups and biomolecules, including proteins and nucleic acids. We demonstrate the utility of this strategy by immobilizing a cell adhesive peptide (H2NO-RGD) to polyketoester films, creating cell adhesive elastomers. This immobilization strategy is synthetically flexible for designing and tailoring polymers for targeted biological applications.     

Formation and catalytic activity of high molecular weight soluble polymers produced by heating amino acids in a modified sea medium

Eighteen protein amino acids with milk casein composition were heated in a modified sea medium.Marigranules were formed in the precipitates and soluble polymers were formed in the supernatant.Time course of the reaction (ultraviolet spectra, the concentration of metal ions, and the concentration of amino acids in the supernatant) were measured. The time course of the formation of the soluble polymers was also studied by Bio-Gel P-2 column.High molecular weight soluble polymers (HMWSP) were separated from low molecular weight ones by dialysis. It was shown that these polymers catalyzed the dehydrogenation of NADH. These polymers also catalyzed the coupled reaction between dehydrogenation of NADH and reduction of resazurin. This coupled reaction was accelerated by the light.     

Determination of reaction volumes and polymer distribution characteristics of tobacco mosaic virus coat protein

A method that allows the quantitative determination of reaction volumes from sedimentation velocity experiments in an analytical ultracentrifuge is presented. Combined with a second method for detecting pressure-induced depolymerization, general characteristics of polymer distributions may be probed. We show that it is possible to determine if a sample is in an equilibrium or metastable state of subunit association. Our approach to probe macromolecular aggregation systems by small pressure perturbations is not restricted to the use of centrifuges. This method has been applied to characterize certain aspects of the polymerization of tobacco mosaic virus coat protein (TMVP). There are at least two helical polymer conformations in RNA-free coat protein rods. The smaller, helix I, polymers are limited to sizes below about 70 subunits (four to five helical turns) and undergo some kind of cooperative conformational change before further subunits may be added indefinitely. In contrast to helix I, the larger helix II polymers occur as broader and skewed size distributions. Under moderately strong polymerization conditions, the equilibrium state can contain both types of helical rods. The reaction volume for the addition of trimers is -220 ml/mol for both types of helical polymers. These results are compared with the results of previous thermodynamic analyses of TMVP polymerization.     

New substrates for reliable enzymes: enzymatic modification of polymers

Recent studies clearly indicate that the modification of synthetic and natural polymers with enzymes is an environmentally friendly alternative to chemical methods using harsh conditions. New processes using lipases, proteases, nitrilases and glycosidases have been developed for the specific non-destructive functionalization of polymer surfaces. The specificity of enzymes has also been exploited in polymer synthesis; for example, lipases have been used for the production of optically active polyesters. Oxidoreductases have been used for the cross-linking and grafting of lignaceous materials and for the production of polymers from phenolics. Recent successes in this area are mainly attributable to advances in the design of reaction systems (e.g. biphasic systems and micellar solutions), while the enzymes are mainly from commercial sources.     

Influence of Polymers on the Physical and Chemical Stability of Spray-dried Amorphous Solid Dispersion: Dipyridamole Degradation Induced by Enteric Polymers

Amorphous solid dispersions (ASDs) are inherently unstable because of high internal energy. Evaluating physical and chemical stability during the process and storage is essential. Numerous researches have demonstrated how polymers influence the drug precipitation and physical stability of ASDs, while the influence of polymers on the chemical stability of ASDs is often overlooked. Therefore, this study aimed to investigate the effect of polymers on the physical and chemical stability of spray-dried ASDs using dipyridamole (DP) as a model drug. Proper polymers were selected by assessing their abilities to inhibit drug recrystallization in supersaturated solutions. HPMC E5, Soluplus®, HPMCP-55, and HPMCAS-LP were shown to be effective stabilizers. The optimized formulations were further stored at a high temperature (60 °C) and high humidity (40 °C, 75% RH) for 2 months, and their physical and chemical stability was evaluated using polarizing optical microscopy, FTIR, HPLC, and mass spectrometry (MS). In general, crystallization was observed in all samples, which indicated the physical instability under stressed storage conditions. Also, it was noted that the polymers in ASDs rather than physical mixtures, induced a dramatic drug degradation after being exposed to a high temperature (HPMCP-55 >?80% and HPMCAS-LP >?50%) and high humidity (HPMCP-55 >?40% and HPMCAS-LP >?10%). The MS analysis further confirmed the degradation products, which might be generated from the reaction between dipyridamole and phthalic anhydride decomposed from HPMCP-55 and HPMCAS-LP. Overall, the exposure of ASDs to stressed conditions resulted in recrystallization and even the chemical degradation induced by polymers.