Long-term survival of and plasmid stability inPseudomonas andKlebsiella species and appearance of nonculturable cells in agricultural drainage water

One year after introduction into agricultural drainage waterPseudomonas fluorescens R2f (RP4),Pseudomonas putida CYM318 (pRK2501), andKlebsiella aerogenes NCTC418 (pBR322) could be recovered on agar media. Survival of the introduced strains depended on competition with the indigenous microflora, the presence of nutrients, and the availability of air.In contrast toK. aerogenes NCTC418 (pBR322), bothPseudomonas species lost their plasmids, as indicated by the consistently lower colony counts on selective medium compared with the counts on nonselective medium. The plasmid loss did not depend on nutrient status and oxygen supply. P. fluorescens R2f cells could be detected with the immunofluorescence (IF) technique. Total cell counts determined by IF were consistently higher than corresponding colony counts. Even in samples where no colonies were recovered, R2f cells could be detected by IF. This indicated the occurrence of nonculturable R2f cells in drainage water. Homology with³²P-labelled plasmid RP4 DNA was found in several drainage water samples that originally receivedP. fluorescens R2f (RP4), by using the cell suspension filter hybridization technique. P. putida CYM318 andK. aerogenes NCTC418 cells could also be detected in sterile drainage water samples, after nonspecific staining with fluorescein isothiocyanate. Cell counts of both strains were consistently higher than corresponding plate counts.     

Characterization of a marine-isolated mercury-resistant <Emphasis Type="Italic">Pseudomonas putida</Emphasis> strain SP1 and its potential application in marine mercury reduction

The Pseudomonas putida strain SP1 was isolated from marine environment and was found to be resistant to 280 μM HgCl₂. SP1 was also highly resistant to other metals, including CdCl₂, CoCl₂, CrCl₃, CuCl₂, PbCl₂, and ZnSO₄, and the antibiotics ampicillin (Ap), kanamycin (Kn), chloramphenicol (Cm), and tetracycline (Tc). mer operon, possessed by most mercury-resistant bacteria, and other diverse types of resistant determinants were all located on the bacterial chromosome. Cold vapor atomic absorption spectrometry and a volatilization test indicated that the isolated P. putida SP1 was able to volatilize almost 100% of the total mercury it was exposed to and could potentially be used for bioremediation in marine environments. The optimal pH for the growth of P. putida SP1 in the presence of HgCl₂ and the removal of HgCl₂ by P. putida SP1 was between 8.0 and 9.0, whereas the optimal pH for the expression of merA, the mercuric reductase enzyme in mer operon that reduces reactive Hg²⁺ to volatile and relatively inert monoatomic Hg⁰ vapor, was around 5.0. LD₅₀ of P. putida SP1 to flounder and turbot was 1.5 × 10⁹ CFU. Biofilm developed by P. putida SP1 was 1- to 3-fold lower than biofilm developed by an aquatic pathogen Pseudomonas fluorescens TSS. The results of this study indicate that P. putida SP1 is a low virulence strain that can potentially be applied in the bioremediation of HgCl₂ contamination over a broad range of pH.     

Improved transformation of Pseudomonas putida KT2440 by electroporation

Summary An electric field-mediated transformation (i.e. electroporation) was performed to determine optimal conditions for P. putida transformation. The effects of culture age, electroporation buffer composition, electric field strength, pulse time constant and DNA concentration on transformation efficiency were examined. When plasmid DNA of 8 to 11 kb in size was used with an electroporation buffer containing 1 mM HEPES (pH 7.0), maximum transformation efficiency of 1.0 × 10⁷ transformants/g DNA was obtained at field strength of 12 kV/cm with pulse time of 2.5 millisecond. A linear increase in the number of transformants was observed as DNA concentration was increased over 4 orders of magnitude. A linear relationship was observed between growth phase and transformation efficiency up to OD₆₀₀ = 2.0. This reliable and simple method should be useful for introduction of plasmid DNA into intact P. putida cells.     

Degradation of tetradecyltrimethylammonium by Pseudomonas putida A ATCC 12633 restricted by accumulation of trimethylamine is alleviated by addition of Al 3+ ions

Aims: To establish if tetradecyltrimethylammonium (TDTMA) might be degraded by pure culture of Pseudomonas strains, and how the presence of a Lewis’ acid in the medium influences its biodegradability. Methods and Results: From different strains of Pseudomonas screened, only Pseudomonas putida A ATCC 12633 grows with 50 mg l^?1 of TDTMA as the sole carbon and nitrogen source. A monooxygenase activity catalyzed the initial step of the biodegradation. The trimethylamine (TMA) produced was used as nitrogen source or accumulated inside the cell. To decrease the intracellular TMA, the culture was divided, and 0·1 mmol l^?1 AlCl₃ added. In this way, the growth and TDTMA consumption increased. The internal concentration of TMA, determined using the fluorochrome Morin, decreased by the formation of Al³⁺ : TMA complex. Conclusions: Pseudomonas putida utilized TDTMA as its sole carbon and nitrogen source. The TMA produced in the initial step of the biodegradation by a monooxygenase activity was used as nitrogen source or accumulated inside the cell, affecting the bacterial growth. This effect was alleviated by the addition of AlCl₃. Significance and Impact of the Study: The use of Lewis’ acids to sequester intracellular amines offers an alternative to achieve an efficient utilization of TDTMA by Ps. putida.     

Ultrasound-mediated DNA transfer for bacteria

In environmental microbiology, the most commonly used methods of bacterial DNA transfer are conjugation and electroporation. However, conjugation requires physical contact and cell–pilus–cell interactions; electroporation requires low-ionic strength medium and high voltage. These limitations have hampered broad applications of bacterial DNA delivery. We have employed a standard low frequency 40 kHz ultrasound bath to successfully transfer plasmid pBBR1MCS2 into Pseudomonas putida UWC1, Escherichia coli DH5α and Pseudomonas fluorescens SBW25 with high efficiency. Under optimal conditions: ultrasound exposure time of 10 s, 50 mM CaCl₂, temperature of 22°C, plasmid concentration of 0.8 ng/µl, P. putida UWC1 cell concentration of 2.5 × 10⁹ CFU (colony forming unit)/ml and reaction volume of 500 µl, the efficiency of ultrasound DNA delivery (UDD) was 9.8 ± 2.3 × 10⁻⁶ transformants per cell, which was nine times more efficient than conjugation, and even four times greater than electroporation. We have also transferred pBBR1MCS2 into E. coli DH5α and P. fluorescens SBW25 with efficiencies of 1.16 ± 0.13 × 10⁻⁶ and 4.33 ± 0.78 × 10⁻⁶ transformants per cell, respectively. Low frequency UDD can be readily scaled up, allowing for the application of UDD not only in laboratory conditions but also on an industrial scale.     

Short communication: Isolation of a bacterium capable of limited degradation of industrial and labelled,natural and synthetic lignins

Pseudomonas putida, isolated from decomposing plant materials, degraded several lignin-related aromatic compounds. After 30 days of incubation in media containing polymeric Kraft-lignin (PKL), the amount of Klason lignin had decreased by about 13%. When ¹⁴C-labelled dehydropolymers of coniferyl alcohol (DHP) lignins and ¹⁴C-lignin-lignocelluloses were used as substrates, mineralization to ¹⁴CO₂ by the P. putida strain ranged from 1.4% to 2.1%.     

Biodegradation of cyanides, cyanates and thiocyanates to ammonia and carbon dioxide by immobilized cells of Pseudomonas putida

Pseudomonas putida utilizes cyanide as the sole source of carbon and nitrogen. Agar, alginate, and carrageenan were screened as the encapsulating matrices for P. putida. Alginate-immobilized cells of P. putida degraded sodium cyanide (NaCN) more efficiently than non-immobilized cells or cells immobilized in agar or carrageenan. The end products of biodegradation of cyanide were identified as ammonia (NH₃) and carbon dioxide (CO₂). These products changed the medium pH. In bioreactors, the rate of cyanide degradation increased with an increase in the rate of aeration. Maximum utilization of cyanide was observed at 200 ml min⁻¹ of aeration. Immobilized cells of P. putida degraded cyanides, cyanates and thiocyanates to NH₃ and CO₂. Use of Na[¹⁴C]-CN showed that 70% of carbon of Na[¹⁴C]-CN was converted into ¹⁴CO₂ and only 10% was associated with the cell biomass. The substrate-dependent kinetics indicated that the K _m and V _max values of P. putida for the substrate, NaCN were 14 mM and 29 nmol of oxygen consumed mg protein⁻¹ min⁻¹ respectively. Received 29 January 1996/ Accepted in revised form 19 September 1997     

Anaerobic C–H Oxyfunctionalization: Coupling of Nitrate Reduction and Quinoline Hydroxylation in Recombinant Pseudomonas putida

Whole‐cell biocatalysis for C–H oxyfunctionalization depends on and is often limited by O₂ mass transfer. In contrast to oxygenases, molybdenum hydroxylases use water instead of O₂ as an oxygen donor and thus have the potential to relieve O₂ mass transfer limitations. Molybdenum hydroxylases may even allow anaerobic oxyfunctionalization when coupled to anaerobic respiration. To evaluate this option, the coupling of quinoline hydroxylation to denitrification is tested under anaerobic conditions employing Pseudomonas putida (P. putida) 86, capable of aerobic growth on quinoline. P. putida 86 reduces both nitrate and nitrite, but at low rates, which does not enable significant growth and quinoline hydroxylation. Introduction of the nitrate reductase from Pseudomonas aeruginosa enables considerable specific quinoline hydroxylation activity (6.9 U g_CDW^?1) under anaerobic conditions with nitrate as an electron acceptor and 2‐hydroxyquinoline as the sole product (further metabolization depends on O₂). Hydroxylation‐derived electrons are efficiently directed to nitrate, accounting for 38% of the respiratory activity. This study shows that molybdenum hydroxylase‐based whole‐cell biocatalysts enable completely anaerobic carbon oxyfunctionalization when coupled to alternative respiration schemes such as nitrate respiration.     

Cloning and nucleotide sequence of a D,L-haloalkanoic acid dehalogenase encoding gene from Alcaligenes xylosoxidans ssp. denitrificans ABIV

We have cloned DNA fragments of plasmid pFL40 from Alcaligenes xylosoxidans ssp. denitrificans ABIV encoding a D,L-2-haloalkanoic acid halidohydrolase (DhlIV). A 6.5-kb EcoRI/SalI-fragment with inducible expression of the halidohydrolase was cloned in Pseudomonas fluorescens and Escherichia coli. A 1.9-kb HindII-fragment demonstrated expression of the dehalogenase only due to the presence of the promoter from the pUC vector in Escherichia coli. The nucleotide sequence of this DNA-fragment was determined. It had an open reading frame coding for 296 amino acid residues (molecular weight of 32783 D). The dhlIV gene showed sequence homology to a short segment of a D-specific dehalogenase (hadD) from Pseudomonas putida AJ1, but not to any other known DNA sequences. Restriction enzyme patterns indicated similarity between dhlIV and the D,L-isomer specific dehI dehalogenase gene from Pseudomonas putida PP3. There are some indications from restriction enzyme patterns and initial sequencing data, that a gene encoding a ⁵⁴ activator protein, similar to the dehR _Iregulatory gene from Pseudomonas putida PP3 is located upstream of dhlIV. In contrast to DehI, dehalogenation of D-or L-chloropropionic acid by the DhlIV-protein leads to lactic acid of inverted configuration.     

Toluene biodegradation by <Emphasis Type="Italic">Pseudomonas putida</Emphasis> F1: targeting culture stability in long-term operation

The stability of Pseudomonas putida F1, a strain harbouring the genes responsible for toluene degradation in the chromosome was evaluated in a bioscrubber under high toluene loadings and nitrogen limiting conditions at two dilution rates (0.11 and 0.27 h⁻¹). Each experiment was run for 30 days, period long enough for microbial instability to occur considering previously reported studies carried out with bacterial strains encoding the catabolic genes in the TOL plasmid. At all tested conditions, P. putida F1 exhibited stable performance as shown by the constant values of the specific toluene degradation yield, CO₂ produced versus toluene degraded yield, and biomass concentration within each steady state. Benzyl alcohol, a curing agent causing TOL plasmid deletion in Pseudomonas strains, was present in the cultivation medium as a result of the monooxygenation of toluene by the diooxygenase system of P. putida F1. However, no mutant population growing at the expense of the extracellular excreted carbon or lysis products was established in the chemostat as confirmed by the constant dissolved total organic carbon (TOC) concentration and fraction of toluene degrading cells (approx. 100%). In addition, batch experiments conducted with both lysis substrate and toluene simultaneously confirmed that P. putida F1 preferentially consumed toluene rather than extracellular excreted carbon.     

Expression and characterization of (<Emphasis Type="Italic">R</Emphasis>)-specific enoyl coenzyme A hydratases making a channeling route to polyhydroxyalkanoate biosynthesis in <Emphasis Type="Italic">Pseudomonas putida</Emphasis>

We investigated the expression of (R)-specific enoyl coenzyme A hydratase (PhaJ) in Pseudomonas putida KT2440 accumulating polyhydroxyalkanoate (PHA) from sodium octanoate in order to identify biosynthesis pathways of PHAs from fatty acids in pseudomonads. From a database search through the P. putida KT2440 genome, an additional phaJ gene homologous to phaJ4 _Pa from Pseudomonas aeruginosa, termed phaJ4 _Pp, was identified. The gene products of phaJ1 _Pp, which was identified previously, and phaJ4 _Pp were confirmed to be functional in recombinant Escherichia coli on PHA synthesis from sodium dodecanoate. Cytosolic proteins from P. putida grown on sodium octanoate were subjected to anion exchange chromatography and one of the eluted fractions with hydratase activity included PhaJ4_Pp, as revealed by western blot analysis. These results strongly suggest that PhaJ4_Pp forms a channeling route from β-oxidation to PHA biosynthesis in P. putida. Moreover, the substrate specificity of PhaJ1_Pp was suggested to be different from that of PhaJ1_Pa from P. aeruginosa although these two proteins share 67% amino acid sequence identity.     

Kinetics of hydrogen sulfide oxidation by immobilized autotrophic and heterotrophic bacteria in bioreactors

Summary The kinetics of H₂S oxidation in bioreactors with separately packed autotrophic Thiobacillus thioparus CH11 and heterotrophic Pseudomonas putida CH11 were evaluated. The reaction rates were determined to be first-order below 20 ppm, zero-order above 60 ppm, and fractional-order in the intermediate concentration ranges for the Thiobacillus thioparus CH11 bioreactor, and first-order below 35 ppm, zero-order above 80 ppm, and fractional-order in the intermediate concentration ranges for the Pseudomonas putida CH11 bioreactor. The saturation constants for H₂S by Thiobacillus thioparus CH11 and Pseudomonas putida CH11 were calculated to be 30.3 ppm and 44.2 ppm, respectively.     

Gas-phase degradation of VOCs using supported bacteria biofilms

Herein we report the use of Pseudomonas putida F1 biofilms grown on carbonized cellulosic fibers to achieve biodegradation of airborne volatile organic compounds (VOCs) in the absence of any bulk aqueous-phase media. It is believed that direct exposure of gaseous VOC substrates to biomass may eliminate aqueous-phase mass transfer resistance and facilitate VOC capture and degradation. When tested with toluene vapor as a model VOC, the supported biofilm could grow optimally at 300 p.p.m. toluene and 80% relative humidity, with a specific growth rate of 0.425 day⁻¹. During long-term VOC biodegradation tests in a tubular packed bed reactor, biofilms achieved a toluene degradation rate of 2.5 mg g_DCW⁻¹ h⁻¹ during the initial growth phase. Interestingly, the P. putida F1 film kept biodegrading activity even at the stationary nongrowth phase. The supported biofilms with a biomass loading of 20% (wt) could degrade toluene at a rate of 1.9 mg g_DCW⁻¹ h⁻¹ during the stationary phase, releasing CO₂ at a rate of 6.4 mg g_DCW⁻¹ h⁻¹ at the same time (indicating 100% conversion of substrate carbon to CO₂). All of these observations promised a new type of “dry” biofilm reactors for efficient degradation of toxic VOCs without involving a large amount of water.     

The mechanism of action of hexahydro-1,3,5-triethyl-s-triazine

Summary The mechanism of antimicrobial action of hexahydro-1,3,5-triethyl-s-triazine (HHTT) was studied using the HHTT-resistant isolate,Pseudomonas putida 3-T-15², its HHTT-sensitive, novobiocin-cured derivative,P. putida 3-T-15² 11:21,P. putida ATCC 12633,Pseudomonas aeruginosa PA01 andEscherichia coli J53 (RP4). HHTT was oxidized byP. putida 3-T-15², while respiration ofP. putida 3-T-15² 11:21 was inhibited by HHTT. Chemical assays showed that HHTT released formaldehyde.P. putida 3-T-15² was highly resistant to formaldehyde, whileP. putida 3-T-15² 11:21 was highly sensitive to formaldehyde. Both HHTT and formaldehyde acted similarly to inhibit proline uptake in bacterial cells and to inhibit the synthesis of the inducible enzymes, -galactosidase and glucose-6-phosphate dehydrogenase. HHTT did not have uncoupler-like activity.P. putida 3-T-15² used either HHTT or ethylamine, a component of HHTT, as a nitrogen source for growth, but neither HHTT, ethylamine or formaldehyde served as a carbon and energy source for growth. We concluded that a major mechanism of antimicrobial action of HHTT was through its degradation product, formaldehyde.     

Effect of High Temperature on <Emphasis Type="Italic">Pseudomonas putida</Emphasis> NBRI0987 Biofilm Formation and Expression of Stress Sigma Factor RpoS

Pseudomonas is an efficient plant growth–promoting rhizobacteria; however, among the limiting factors for its commercialization, tolerance for high temperature is the most critical one. After screening 2,500 Pseudomnas sp. strains, a high temperature tolerant–strain Pseudomonas putida NBRI0987 was isolated from the drought-exposed rhizosphere of chickpea (Cicer arietinum L. cv. Radhey), which was grown under rain-fed conditions. P. putida NBRI0987 tolerated a temperature of 40°C for ≤ 5 days. To the best of our knowledge, this is the first report of a Pseudomnas sp. demonstrating survival estimated by counting viable cells under such a high temperature. P. putida NBRI0987 colony-forming unit (CFU)/ml on day 10 in both the absence and presence of MgSO₄.7H₂O (MgSO₄) in combination with glycerol at 40°C were 0.0 and 1.7 × 10¹¹, respectively. MgSO₄ plus glycerol also enhanced the ability of P. putida NBRI0987 to tolerate high temperatures by inducing its ability to form biofilm. However, production of alginate was not critical for biofilm formation. The present study demonstrates overexpression of stress sigma factor σ ^S (RpoS) when P. putida NBRI0987 is grown under high-temperature stress at 40°C compared with 30°C. We present evidence, albeit indirect, that the adaptation of P. putida NBRI0987 to high temperatures is a complex multilevel regulatory process in which many different genes can be involved.     

Metal binding by pyridine-2,6-bis(monothiocarboxylic acid), a biochelator produced by Pseudomonas stutzeri and Pseudomonas putida

Pyridine-2,6-bis(monothiocarboxylic acid) (pdtc),a natural metal chelator produced by Pseudomonas stutzeri and Pseudomonas putidathat promotes the degradation of carbon tetrachloride, was synthesized and studiedby potentiometric and spectrophotometric techniques. The first two stepwise protonationconstants (pK) for successive proton addition to pdtc were found to be 5.48 and2.58. The third stepwise protonation constant was estimated to be 1.3. The stability (affinity)constants for iron(III), nickel(II), and cobalt(III) were determined by potentiometric orspectrophotometric titration. The results show that pdtc has strong affinity for Fe(III)and comparable affinities for various other metals. The stability constants (log K) are 33.93 for Co(pdtc)₂ ^1-; 33.36 for Fe(pdtc)₂ ^1-; and 33.28 for Ni(pdtc)₂ ^2-. These protonationconstants and high affinity constants show that over a physiological pH range theferric pdtc complex has one of the highest effective stability constants for ironbinding among known bacterial chelators.     

Comparative effectiveness of <Emphasis Type="Italic">Pseudomonas</Emphasis> and <Emphasis Type="Italic">Serratia</Emphasis> sp. containing ACC-deaminase for improving growth and yield of wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.) under salt-stressed conditions

Ethylene synthesis is accelerated in response to various environmental stresses like salinity. Ten rhizobacterial strains isolated from wheat rhizosphere taken from different salt affected areas were screened for growth promotion of wheat under axenic conditions at 1, 5, 10 and 15 dS m⁻¹. Three strains, i.e., Pseudomonas putida (N21), Pseudomonas aeruginosa (N39) and Serratia proteamaculans (M35) showing promising performance under axenic conditions were selected for a pot trial at 1.63 (original), 5, 10 and 15 dS m⁻¹. Results showed that inoculation was effective even in the presence of higher salinity levels. P. putida was the most efficient strain compared to the other strains and significantly increased the plant height, root length, grain yield, 100-grain weight and straw yield up to 52, 60, 76, 19 and 67%, respectively, over uninoculated control at 15 dS m⁻¹. Similarly, chlorophyll content and K⁺/Na⁺ of leaves also increased by P. putida over control. It is highly likely that under salinity stress, 1-aminocyclopropane-1-carboxylic acid-deaminase activity of these microbial strains might have caused reduction in the synthesis of stress (salt)-induced inhibitory levels of ethylene. The results suggested that these strains could be employed for salinity tolerance in wheat; however, P. putida may have better prospects in stress alleviation/reduction.     

Intracellular degradation of two structurally different polyhydroxyalkanoic acids accumulated in Pseudomonas putida and Pseudomonas citronellolis from mixtures of octanoic acid and 5-phenylvaleric acid

From a set of mixed carbon sources, 5-phenylvaleric acid (PV) and octanoic acid (OA), polyhydroxyalkanoic acid (PHA) was separately accumulated in the two pseudomonads Pseudomonas putida BM01 and Pseudomonas citronellolis (ATCC 13674) to investigate any structural difference between the two PHA accumulated under a similar culture condition using one-step culture technique. The resulting polymers were isolated by chloroform solvent extraction and characterized by fractional precipitation and differential scanning calorimetry. The solvent fractionation analysis showed that the PHA synthesized by P. putida was separated into two fractions, 3-hydroxy-5-phenylvalerate (3HPV))-rich PHA fraction in the precipitate phase and 3-hydroxyoctanoate (3HO)-rich PHA fraction in the solution phase whereas the PHA produced by P. citronellolis exhibited a rather little compositional separation into the two phases. According to the thermal analysis, the P. putida PHA exhibited two glass transitions indicative of the PHA not being homogeneous whereas the P. citronellolis PHA exhibited only one glass transition. It was found that the structural heterogeneity of the P. putida PHA was caused by a significant difference in the assimilation rate between PV and OA. The structural heterogeneity present in the P. putida PHA was also confirmed by a first order degradation kinetics analysis of the PHA in the cells. The two different first-order degradation rate constants (k₁), 0.087 and 0.015/h for 3HO- and 3HPV-unit, respectively, were observed in a polymer system over the first 20 h of degradation. In the later degradation period, the disappearance rate of 3HO-unit was calculated to be 0.020 h. The k₁ value of 0.083/h, almost the same as for the 3HO-unit in the P. putida PHA, was obtained for the P(3HO) accumulated in P. putida BM01 grown on OA as the only carbon source. In addition, the k₁ value of 0.015/h for the 3HPV-unit in the P. putida PHA, was also close to 0.019/h for the P(3HPV) homopolymer accumulated in P. putida BM01 grown on PV plus butyric acid. On the contrary, the k₁ values for the P. citronellolis PHA were determined to be 0.035 and 0.029/h for 3HO- and 3HPV-unit, respectively, thus these two relatively close values implying a random copolymer nature of the P. citronellolis PHA. In addition, the faster degradation of P(3HO) than P(3HPV) by the intracellular P. putida PHA depolymerase indicates that the enzyme is more specific against the aliphatic PHA than the aromatic PHA.     

Crystallization and preliminary X-ray crystallographic studies of ketosteroid isomerase from Pseudomonas putida biotype B

The Δ⁵-3-ketosteroid isomerase from Pseudomonas putida biotype B has been crystallized. The crystals belong to the space group P2₁2₁2₁ with unit cell dimensions of a = 36.48 Å, b = 74.30 Å, c = 96.02 Å, and contain one homodimer per asymmetric unit. Native diffraction data to 2.19 Å resolution have been obtained from one crystal at room temperature indicating that the crystals are quite suitable for structure determination by multiple isomorphous replacement.     

Automated feeding strategies for high-cell-density fed-batch cultivation of Pseudomonas putida KT2440

Four automatic substrate feeding strategies were developed and investigated in this study to obtain rapid, repeatable, and reliable high cell densities of Pseudomonas putida KT2440 from glucose. Growth yield data of the key nutrients, Y _X/Glucose, Y _X/NH4, Y _X/PO4, Y _X/Mg, and Y _CO2/Glucose, were determined to be 0.41, 5.44, 13.70, 236, and 0.65 g g⁻¹, respectively. Although standard exponential feeding strategy worked well when the predetermined μ was set at 0.25 h⁻¹, an exponential glucose feeding strategy with online μ _max estimation resulted in a higher average biomass productivity (3.4 vs 2.8 g l⁻¹ h⁻¹). A CO₂ production rate based pulse glucose feeding strategy also resulted in good overall productivity (3.0 g l⁻¹ h⁻¹) and can be used as an alternative to pH-stat or DO-stat feeding. A cumulative CO₂ production based continuous feed with real-time cumulative glucose consumption estimation resulted in much higher biomass productivity (4.3 g l⁻¹ h⁻¹) and appears to be an excellent and reliable approach to fully automating high-cell-density fed-batch cultivation of P. putida.