Effects of biomass weight and light intensity on the performance of photosynthetic microbial fuel cells with Spirulina platensis

Microalgae Spirulina platensis were attached to the anode of a membrane-free and mediator-free microbial fuel cell (MFC) to produce electricity through the consumption of biochemical compounds inside the microalgae. An increase in open circuit voltage (OCV) was observed with decreasing light intensity and optimal biomass area density. The highest OCV observation for the MFC was 0.39 V in the dark with a biomass area density on the anode surface of 1.2 g cm⁻². Additionally, it was observed that the MFC with 0.75 g cm⁻² of biomass area density produced 1.64 mW m⁻² of electrical power in the dark, which is superior to the 0.132 mW m⁻² produced in the light. Which also means the MFC can be applied to generate electrical power under both day and night conditions.     

Microbial fuel cell characterisation and evaluation of <Emphasis Type="Italic">Lysinibacillus macroides</Emphasis> MFC02 electrigenic capability

Microbial fuel cell (MFC) is the most prominent research field due to its capability to generate electricity by utilizing the renewable sources. In the present study, Two MFC designs namely, H type-Microbial fuel cell (HT-MFC) and U type-Microbial fuel cell (UT-MFC) were constructed based on standardized H shaped anode and cathode compartment as well as U shaped anode and cathode compartments, respectively. In order to lower the cost for MFC construction, Pencil graphite lead was used as electrode and salt agar as Proton exchange membrane. Results inferred that newly constructed UT-MFC showed high electron production when compared to the HT-MFC. UT-MFC displayed an output of about 377?±?18.85 mV (millivolts); whereas HT-MFC rendered only 237?±?11.85 mV (millivolts) of power generation, which might be due to the low internal resistance. By increasing the number of cathode in UT-MFC, power production was increased upto 313?±?15.65 mV in Open circuit voltage (OCV). Electrogenic bacteria namely, Lysinibacillus macroides (Acc. No. KX011879) rendered enriched power generation. The attachment of bacteria as a biofilm on pencil graphite lead was analyzed using fluorescent microscope and Scanning Electron Microscope (SEM). Based on our findings, it was observed that UT-MFC has a tendency to produce high electron generation using pencil graphite lead as the electrode material.     

Continuous flowing membraneless microbial fuel cells with separated electrode chambers

Microbial fuel cell (MFC) is an emerging technology in the energy and environment field. Its application is limited due to its high cost caused by the utilization of membranes and noble metal catalysts. In this paper, a membraneless MFC, with separated electrode chambers, was designed. The two separated chambers are connected via a channel and the continuous electrolyte flow from anode to cathode drives proton transfer. The proton mass transfer coefficiency in this MFC is 0.9086 cm/s, which is higher than reported MFCs with membranes, such as J-cloth and glass fiber. The maximum output voltage is 160.7 mV, with 1000 Ω resistor. Its peak power density is 24.33 mW/m3. SCOD removal efficiency can reach 90.45% via this MFC. If the connection between the two electrode chambers is blocked, the performance of MFC will decrease severely. All the above results prove the feasibility and advantages of this special MFC model.     

Fabrication of stainless steel mesh gas diffusion electrode for power generation in microbial fuel cell

This study reports the fabrication of a new membrane electrode assembly by using stainless steel mesh (SSM) as raw material and its effectiveness as gas diffusion electrode (GDE) for electrochemical oxygen reduction in microbial fuel cell (MFC). Based on feeding glucose (0.5 g L(-1)) substrate to a single-chambered MFC, power generation using SSM-based GDE was increased with the decrease of polytetrafluoroethylene (PTFE) content applied during fabrication, reaching the optimum power density of 951.6 mW m(-2) at 20% PTFE. Repeatable cell voltage of 0.51 V (external resistance of 400 Ω) and maximum power density of 951.6 mW m(-2) produced for the MFC with SSM-based GDE are comparable to that of 0.52 V and 972.6 mW m(-2), respectively obtained for the MFC containing typical carbon cloth (CC)-made GDE. Besides, Coulombic efficiency (CE) is found higher for GDE (SSM or CC) with membrane assembly than without, which results preliminarily from the mitigation of Coulombic loss being associated with oxygen diffusion and substrate crossover. This study demonstrates that with its good electrical conductivity and much lower cost, the SSM-made GDE suggests a promising alternative as efficient and more economically viable material to conventional typical carbon for power production from biomass in MFC.     

Enhanced bioelectrochemical performance caused by porous metal-organic framework MIL-53(Fe) as the catalyst in microbial fuel cells

To enhance the oxygen reduction reaction (ORR) activity and power generation capacity of a microbial fuel cell (MFC), MIL-53(Fe) (Fe-based Materials of Institute Lavoisier) as the electrochemical catalyst was synthesized using the hydrothermal method. The catalytic structure and morphology of all materials were comprehensively characterized by Fourier Transform infrared spectrometer (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM) and energy dispersive spectrometer (EDS). The results show that there were many nanopores on MIL-53(Fe), which improved the electrocatalytic activity. The MIL-53(Fe)-modified air cathode MFC had a voltage output of approximately 0.37 V and maintained that output for one week. The maximum power density was 397 ± 6.3 mW/m². MIL-53(Fe) was an excellent electrochemical catalyst, significantly enhancing the catalytic oxygen reduction ability and promoting the power output of the MFC. This study provides a method to apply MIL-53(Fe) materials in microbial fuel cells.     

Development of a solar-powered microbial fuel cell

Aims: To understand factors that impact solar‐powered electricity generation by Rhodobacter sphaeroides in a single‐chamber microbial fuel cell (MFC). Methods and Results: The MFC used submerged platinum‐coated carbon paper anodes and cathodes of the same material, in contact with atmospheric oxygen. Power was measured by monitoring voltage drop across an external resistance. Biohydrogen production and in situ hydrogen oxidation were identified as the main mechanisms for electron transfer to the MFC circuit. The nitrogen source affected MFC performance, with glutamate and nitrate‐enhancing power production over ammonium. Conclusions: Power generation depended on the nature of the nitrogen source and on the availability of light. With light, the maximum point power density was 790 mW m^?2 (2·9 W m^?3). In the dark, power output was less than 0·5 mW m^?2 (0·008 W m^?3). Also, sustainable electrochemical activity was possible in cultures that did not receive a nitrogen source. Significance and Impact of the Study: We show conditions at which solar energy can serve as an alternative energy source for MFC operation. Power densities obtained with these one‐chamber solar‐driven MFC were comparable with densities reported in nonphotosynthetic MFC and sustainable for longer times than with previous work on two‐chamber systems using photosynthetic bacteria.     

A comparison of membranes and enrichment strategies for microbial fuel cells

The external resistance is perhaps the easiest way to influence the operation of a microbial fuel cell (MFC). In this paper, three enrichment strategies, whereby the external resistance was fixed at: (1) a high value in order to maximize the cell voltage (U strategy); (2) a low value in order to maximize the current (I strategy); and (3) a value equal to the internal resistance of the MFC to maximize the power output (P strategy), were investigated. The I strategy resulted in increased maximum power generation and the likely reason is that electron transfer was facilitated under low external resistance, which in turn, favored the development of an electrochemically active biofilm. This experiment was conducted in a single-chamber MFC system equipped with a membrane electrode assembly, and a comparison of the performance achieved by five different membranes is also provided. Selemion was found to be a suitable alternative to Nafion.     

Integration of a microbial fuel cell with activated sludge process for energy-saving wastewater treatment: taking a sequencing batch reactor as an example

In the research and application of microbial fuel cell (MFC), how to incorporate MFCs into current wastewater infrastructure is an importance issue. Here, we report a novel strategy of integrating an MFC into a sequencing batch reactor (SBR) to test the energy production and the chemical oxygen demand (COD) removal. The membrane-less biocathode MFC is integrated with the SBR to recover energy from the aeration in the form of electricity and thus reduce the SBR operation costs. In a lab-scale integrated SBR-MFC system, the maximum power production of the MFC was 2.34 W/m(3) for one typical cycle and the current density reached up to 14 A/m(3) . As a result, the MFC contributed to the 18.7% COD consumption of the integrated system and also recovered energy from the aeration tank with a volume fraction of only 12% of the SBR. Our strategy provides a feasible and effective energy-saving and -recovering solution to upgrade the existing activated sludge processes.     

Thionine increases electricity generation from microbial fuel cell using Saccharomyces cerevisiae and exoelectrogenic mixed culture

Microbial fuel cells (MFCs) have been shown to be capable of clean energy production through the oxidation of biodegradable organic waste using various bacterial species as biocatalysts. In this study we found Saccharomyces cerevisiae, previously known electrochemcially inactive or less active species, can be acclimated with an electron mediator thionine for electrogenic biofilm formation in MFC, and electricity production is improved with facilitation of electron transfer. Power generation of MFC was also significantly increased by thionine with both aerated and non-aerated cathode. With electrochemically active biofilm enriched with swine wastewater, MFC power increased more significantly by addition of thionine. The optimum mediator concentration was 500 mM of thionine with S. cerevisae in MFC with the maximum voltage and current generation in the microbial fuel cell were 420 mV and 700 mA/m(2), respectively. Cyclic voltametry shows that thionine improves oxidizing and reducing capability in both pure culture and acclimated biofilm as compared to non-mediated cell. The results obtained indicated that thionine has great potential to enhance power generation from unmediated yeast or electrochemically active biofilm in MFC.     

Increased power generation from primary sludge by a submersible microbial fuel cell and optimum operational conditions

Microbial fuel cells (MFCs) have received attention as a promising renewable energy technology for waste treatment and energy recovery. We tested a submersible MFC with an innovative design capable of generating a stable voltage of 0.250 ± 0.008 V (with a fixed 470 Ω resistor) directly from primary sludge. In a polarization test, the maximum power density was 0.18 W/m² at a current density of 0.8 A/m² with an external resistor of 300 Ω. The anodic solution of the primary sludge needs to be adjusted to a pH 7 for high power generation. The modified primary sludge with an added phosphate buffer prolonged the current generation and increased the power density by 7 and 1.5 times, respectively, in comparison with raw primary sludge. These findings suggest that energy recovery from primary sludge can be maximized using an advanced MFC system with optimum conditions.     

Evaluation of microbial fuel cell operation using algae as an oxygen supplier: carbon paper cathode vs. carbon brush cathode

Microbial fuel cell (MFC) and its cathode performances were compared with use of carbon fiber brush and plain carbon paper cathode electrodes in algae aeration. The MFC having carbon fiber brush cathode exhibited a voltage of 0.21 ± 0.01 V (1,000 Ω) with a cathode potential of around ?0.14 ± 0.01 V in algal aeration, whereas MFC with plain carbon paper cathode resulted in a voltage of 0.06 ± 0.005 V with a cathode potential of ?0.39 ± 0.01 V. During polarizations, MFC equipped with carbon fiber brush cathode showed a maximum power density of 30 mW/m², whereas the MFC equipped with plain carbon paper showed a power density of 4.6 mW/m². In algae aeration, the internal resistance with carbon fiber brush cathode was 804 Ω and with plain carbon paper it was 1,210 Ω. The peak currents of MFC operation with carbon fiber brush and plain carbon paper cathodes were ?31 mA and ?850 µA, respectively.     

Current and voltage responses in instant photosynthetic microbial cells with Spirulina platensis

The electrical response of photosynthetic microbial cells (PMCs) containing Spirulina platensis was investigated to assess the feasibility of using these PMCs as instant-use and portable devices. The PMCs were constructed without membranes, mediators, or any additive organic substrates. Once S. platensis was attached to an anode, voltage was instantly obtained and ready for application. Since no additional substrate was required as fuel for electricity generation, these PMCs were different from typical microbial fuel cells. PMCs were examined under various operating conditions, and they performed under high open circuit voltage (OCV) with high power output in the dark, short electrode spacing (2 cm), low pH value (5.5), and high temperature (40 °C) conditions. According to Ohm's Law and the Nernst equation, the superior OCV and power output were caused by high ionic strength, low internal resistance, and high temperature. Additionally, two equal-sized PMCs were arranged in serial and parallel configurations. The former yielded higher voltage while the latter yielded higher current density.     

Assessment of organic removal in series- and parallel-connected microbial fuel cell stacks

Microbial fuel cells (MFCs) degrade organic contaminants in wastewater while simultaneously producing electricity, but must be stacked to yield adequate voltage and current. This study examined the evolution of the chemical oxygen demand (COD) removal rate and efficiency in two identical individual MFCs (i-MFCs) in series- and parallel-connected stacks (sc- and pc-MFCs, respectively) under batch and continuous operation. The stack voltage and current increased in the respective series and parallel connections of the two i-MFCs (MFC unit 1 and MFC unit 2). Voltage reversal was observed in the sc- MFC below an external load of 100 Ω. Regardless of occurrence of the voltage reversal, organic reduction between i-MFCs and sc-MFCs showed no significant difference (gap of < 9% and < 6% in COD removal rate and efficiency, respectively); additionally, organic removals between the two individual MFCs in series indicated differences less than 9% of COD removal rate and 5% of COD removal efficiency in batch mode. Continuous operation also yielded similar organic removals as the MFCs in individual and series connection (voltage reversal occurred) mode, even over 8 days operation. Parallel connection yielded identical organic removals and currents in the two individual MFCs of the pc-MFC, even though the two separate i-MFCs showed different organic removal rates and current productions. This study provides the guide for the application of stacked MFCs for power source and efficient organic pollutant removal in wastewater treatment process.     

Impact of initial biofilm growth on the anode impedance of microbial fuel cells

Electrochemical impedance spectroscopy (EIS) was used to study the behavior of a microbial fuel cell (MFC) during initial biofilm growth in an acetate-fed, two-chamber MFC system with ferricyanide in the cathode. EIS experiments were performed both on the full cell (between cathode and anode) as well as on individual electrodes. The Nyquist plots of the EIS data were fitted with an equivalent electrical circuit to estimate the contributions of various intrinsic resistances to the overall internal MFC impedance. During initial development of the anode biofilm, the anode polarization resistance was found to decrease by over 70% at open circuit and by over 45% at 27 microA/cm(2), and a simultaneous increase in power density by about 120% was observed. The exchange current density for the bio-electrochemical reaction on the anode was estimated to be in the range of 40-60 nA/cm(2) for an immature biofilm after 5 days of closed circuit operation, which increased to around 182 nA/cm(2) after more than 3 weeks of operation and stable performance in an identical parallel system. The polarization resistance of the anode was 30-40 times higher than that of the ferricyanide cathode for the conditions tested, even with an established biofilm. For a two-chamber MFC system with a Nafion 117 membrane and an inter-electrode spacing of 15 cm, the membrane and electrolyte solution dominate the ohmic resistance and contribute to over 95% of the MFC internal impedance. Detailed EIS analyses provide new insights into the dominant kinetic resistance of the anode bio-electrochemical reaction and its influence on the overall power output of the MFC system, even in the high internal resistance system used in this study. These results suggest that new strategies to address this kinetic constraint of the anode bio-electrochemical reactions are needed to complement the reduction of ohmic resistance in modern designs.     

Electricity generation and microbial community analysis of alcohol powered microbial fuel cells

Two different microbial fuel cell (MFC) configurations were investigated for electricity production from ethanol and methanol: a two-chambered, aqueous-cathode MFC; and a single-chamber direct-air cathode MFC. Electricity was generated in the two-chamber system at a maximum power density typical of this system (40+/-2 mW/m2) and a Coulombic efficiency (CE) ranging from 42% to 61% using ethanol. When bacteria were transferred into a single-chamber MFC known to produce higher power densities with different substrates, the maximum power density increased to 488+/-12 mW/m2 (CE = 10%) with ethanol. The voltage generated exhibited saturation kinetics as a function of ethanol concentration in the two-chambered MFC, with a half-saturation constant (Ks) of 4.86 mM. Methanol was also examined as a possible substrate, but it did not result in appreciable electricity generation. Analysis of the anode biofilm and suspension from a two-chamber MFC with ethanol using 16S rDNA-based techniques indicated that bacteria with sequences similar to Proteobacterium Core-1 (33.3% of clone library sequences), Azoarcus sp. (17.4%), and Desulfuromonas sp. M76 (15.9%) were significant members of the anode chamber community. These results indicate that ethanol can be used for sustained electricity generation at room temperature using bacteria on the anode in a MFC.     

Electricity generation and modeling of microbial fuel cell from continuous beer brewery wastewater

Electricity production and modeling of microbial fuel cell (MFC) from continuous beer brewery wastewater was studied in this paper. A single air-cathode MFC was constructed, carbon fiber was used as anode and diluted brewery wastewater (COD = 626.58 mg/L) as substrate. The MFC displayed an open-circuit voltage of 0.578 V and a maximum power density of 9.52 W/m³ (264 mW/m²). Using the model based on polarization curve, various voltage losses were quantified. At current density of 1.79 A/m², reaction kinetic loss and mass transport loss both achieved to 0.248 V; while ohmic loss was 0.046 V. Results demonstrated that it was feasible and stable for producing bioelectricity from brewery wastewater; while the most important factors which influenced the performance of the MFC are reaction kinetic loss and mass transport loss.     

Carbon nanotube powders as electrode modifier to enhance the activity of anodic biofilm in microbial fuel cells

Carbon nanotube (CNT) is a promising electrode material and has been used as an anode modifier in microbial fuel cells (MFCs). In this study, a new method of simultaneously adding CNT powders and Geobacter sulfurreducens into the anode chamber of a MFC was used, aiming to form a composite biofilm on the anode. The performance of MFCs such as startup time and steady-state power generation was investigated under conditions of different CNT powders dosages. Results showed that both the startup time and the anodic resistance were reduced. The optimal dosage of CNT powders pre-treated by acid was 4 mg/mL for the anode chamber with an effective volume of 25 mL. The anodic resistance and output voltage of the MFC with CNT powders addition were maintained around 180 Ω and 650 mV during 40 days operation, while those of the MFC without CNT powders addition increased from 250 Ω to 540 Ω and decreased from 630 mV to 540 mV, respectively, demonstrating that adding CNT powders helped stabilize the anodic resistance, thus the internal resistance and power generation during long-term operation. Based on cyclic voltammogram, the electrochemical activity of anodic biofilm was enhanced by adding CNT powders, though no significant increase of the biomass in anodic biofilm was detected by phospholipids analysis. There was no remarkable change of ohmic resistance with an addition of CNT powders revealed by current interrupt method, which indicated that the rate of mass transfer might be promoted by the presence of CNT powders.     

一株产电菌Nitratireductor sp. WJ5-4的筛选及产电分析

【目的】从生物垃圾燃料电池阳极淋洗液中分离一株产电菌WJ5-4,研究其产电特性。【方法】根据菌株的形态、生理生化性质及16S r RNA基因测序分析确定其种属,以该菌株为产电菌,以生物垃圾为底物,构建微生物燃料电池(Microbial fuel cell,MFC),研究在不同接种浓度和底物固含量条件下菌株的产电性能。【结果】菌株WJ5-4被初步鉴定属于Nitratireductor属,当接种量200 m L时可获得最大功率密度135.16 m W/m2、稳定电压370 m V和总有机碳(Total organic carbon,TOC)降解率41.46%。当底物固含量为23%时,可获得最大功率密度163.69 m W/m2、稳定电压434 m V和TOC降解率46.29%。【结论】WJ5-4菌能够利用较高固含量的生物垃圾产电,产电周期较长,为下一步微生物燃料电池处理生物垃圾提供科学依据。     

Effects of substrate concentrations on performance of serially connected microbial fuel cells (MFCs) operated in a continuous mode

Stacking of microbial fuel cells (MFC) by connecting multiple small-sized units in a series is used for generating higher power from the MFCs. However, voltage reversal is a critical problem in a serially connected MFC unit. The voltage reversal often occurs when substrate concentration is relatively low in the anodic compartment. Two rectangular individual cells were stacked together in series: MFC1 was fed with 1?g?glucose?L^?1 throughout the experiment while MFC2 was fed with various concentrations of glucose (0.1, 0.2, 0.3, 0.5 and 0.8?g?L^?1). Voltage reversal occurred when the stack configuration was performed using (1?+?0.1)?g?glucose?L^?1. The stacked configurations with (1?+?0.2, 1?+?0.3, 1?+?0.5 and 1?+?0.8)?g?glucose?L^?1 were operated successfully without the voltage reversal. The maximum powers of 1.88, 2.04, 3.6, 2.5 and 2.18?mW were obtained with the stacked configurations of (1?+?0.2), (1?+?0.3), (1?+?0.5), (1?+?0.8) and (1?+?1)?g?glucose?L^?1, respectively. Except in the stacked configuration with (1?+?0.1)?g?glucose?L^?1, the stacked voltages obtained were similar.     

Electricity production in membrane-less microbial fuel cell fed with livestock organic solid waste

Two different MFC configurations designed for handling solid wastes as a feedstock were evaluated in batch mode: a single compartment combined membrane-electrodes (SCME) design; and a twin-compartment brush-type anode electrodes (TBE) design (reversed T-shape MFC with two-air cathode) without a proton exchange membrane (PEM). Cattle manure was tested as a model livestock organic solid waste feedstock. Under steady conditions, voltage of 0.38 V was recorded with an external resistance of 470 Ω. When digested anaerobic sludge was used as the seed in the SCME design, a maximum power density of 36.6 mW/m² was recorded. When hydrogen-generating bacteria (HGB) were used as the seed used in the TBE design, a higher power density of 67 mW/m² was recorded.