Salicylate poly(vinyl chloride) membrane electrode based on (2-[(E)-2-(4-nitrophenyl) hydrazono]-1-phenyl-2-(2-quinolyl)-1-ethanone) Cu(II)

A new salicylate-selective electrode based on the complex of (2-[(E)-2-(4-nitrophenyl)hydrazono]-1-phenyl-2-(2-quinolyl)-1-ethanone) Cu(II) as the membrane carrier was developed. The electrode exhibited a good Nernstian slope of -59.6+/-1.0 mV/decade and a linear range of 1.0 x 10(-6) to 1.0M for salicylate. The limit of detection was 5.0 x 10(-7) M. The electrode had a fast response time of 10 s and can be used for more than 3 months. The selective coefficients were determined by the fixed interference method and could be used in the pH range of 4.0 to 10.5. The electrode was employed as an indicator electrode for direct determination of salicylate in pharmaceutical and biological samples.     

Simple determination of trace amounts of anionic surfactants in river water by spectrophotometry combined with solid-phase extraction

A simple and sensitive spectrophotometric method combined with solid-phase extraction (SPE) for the simultaneous determination of sodium linear-dodecylbenzenesulfonate (DBS) and sodium dodecyl sulfate (SDS) is described. The C2 (ethyl group bonded silicagel) cartridge could be repeatedly used more than 500 times for SPE, and it enabled the anionic surfactants to be concentrated by 50-fold. The calibration graph for DBS was linear in the range from 1.6 x 10(-8) M to 5.0 x 10(-7) M and for SDS from 2.0 x 10(-9) M to 3.0 x 10(-7) M. The relative standard deviation (n=5) for 5.0 x 10(-7) M DBS was 3.1% and for 2.5 x 10(-7) M SDS was 1.7%. The proposed method was applied to the simultaneous determination of DBS and SDS in river-water samples.     

Studies on sildenafil citrate (Viagra) interaction with DNA using electrochemical DNA biosensor

The interaction of sildenafil citrate (Viagra) with DNA was studied by using an electrochemical DNA biosensor. The binding mechanism of sildenafil citrate was elucidated by using constant current potentiometry and differential pulse voltammetry at DNA-modified glassy carbon electrode. The decrease in the guanine oxidation peak area or peak current was used as an indicator for the interaction in 0.2M acetate buffer (pH 5). The binding constant (K) values obtained were 2.01+/-0.05 x 10(5) and 1.97+/-0.01 x 10(5)M(-1) with constant current potentiometry and differential pulse voltammetry, respectively. A linear dependence of the guanine peak area or peak current was observed within the range of 1-40 microM sildenafil citrate with slope=-2.74 x 10(-4)s/microM, r=0.989 and slope=-2.78 x 10(-3)microA/microM, r=0.995 by using constant current potentiometry and differential pulse voltammetry, respectively. Additionally, binding constant values for sildenafil citrate-DNA interaction were determined for the pH range of 4-8 and in biological fluids (serum and urine) at pH 5. The influence of sodium and calcium ions was also studied to elucidate the mechanism of sildenafil citrate-DNA interaction under different solution conditions. The present study may prove to be helpful in extending our understanding of the anticancer activity of sildenafil citrate from cellular to DNA level.     

Differential pulse anodic voltammetric determination of pantoprazole in pharmaceutical dosage forms and human plasma using glassy carbon electrode

Pantoprazole is used as an anti-ulcer drug through inhibition of H(+), K(+)-adenosine 5(')-triphosphatase in gastric parietal cells. It reduces the gastric acid secretion regardless of the nature of stimulation. The use of differential pulse voltammetry for the determination of pantoprazole in pharmaceutical dosage forms and human plasma using a glassy carbon electrode has been examined. The best voltammetric response was reached for a glassy carbon electrode in Britton-Robinson buffer solution of pH 5.0 submitted to a scan rate of 20.0 mVs(-1) and a pulse amplitude of 50.0 mV. This electroanalytical procedure was able to determine pantoprazole in the concentration range 6.0 x 10(-6)-8.0 x 10(-4)M. Precision and accuracy of the developed method was checked with recovery studies. The limit of detection and limit of quantitation were found to be 4.0 x 10(-7) and 9.0 x 10(-7)M, respectively. Rapidity, precision, and good selectivity were also found for the determination of pantoprazole in pharmaceutical dosage forms and human plasma. For comparative purposes high-performance liquid chromatography with a diode array and UV/VIS detection at 290.0 nm determination also was developed.     

Reagentless glucose biosensor based on direct electron transfer of glucose oxidase immobilized on colloidal gold modified carbon paste electrode

The direct electrochemistry of glucose oxidase (GOD) adsorbed on a colloidal gold modified carbon paste electrode was investigated. The adsorbed GOD displayed a pair of redox peaks with a formal potential of -(449+/-1) mV in 0.1 M pH 5.0 phosphate buffer solution. The response showed a surface-controlled electrode process with an electron transfer rate constant of (38.9+/-5.3)/s determined in the scan rate range from 10 to 100 mV/s. GOD adsorbed on gold colloid nanoparticles maintained its bioactivity and stability. The immobilized GOD could electrocatalyze the reduction of dissolved oxygen and resulted in a great increase of the reduction peak current. Upon the addition of glucose, the reduction peak current decreased, which could be used for glucose detection with a high sensitivity (8.4 microA/mM), a linear range from 0.04 to 0.28 mM and a detection limit of 0.01 mM at a signal-to-noise ratio of 3sigma. The sensor could exclude the interference of commonly coexisted uric and ascorbic acid.     

Divalent ion-binding properties of the two avian beta-parvalbumins

Birds express three parvalbumins, one alpha isoform and two beta isoforms. The latter are known as avian thymic hormone (ATH) and avian parvalbumin 3. Although both were discovered in thymus tissue, and presumably function in T-cell maturation, they have been detected in other tissue settings. We have conducted detailed Ca2+- and Mg2+-binding studies on recombinant ATH and the C72S variant of CPV3, employing global analysis of isothermal titration calorimetry data. In Hepes-buffered saline, ATH binds Ca2+ with apparent microscopic binding constants of 2.4 +/- 0.2 x 10(8) and 1.0 +/- 0.1 x 10(8) M(-1). The corresponding values for CPV3-C72S are substantially lower, 4.5 +/- 0.5 x 10(7) and 2.4 +/- 0.2 x 10(7) M(-1), a 1.9-kcal/mol difference in binding free energy. Thus, the beta-parvalbumin lineage displays a spectrum of Ca2+-binding affinity, with ATH and the mammalian beta isoform at the high- and low-affinity extremes and CPV3 in the middle. Interestingly, despite its decreased Ca2+ affinity, CPV3-C72S exhibits increased affinity for Mg2+, relative to ATH. Whereas the latter displays Mg2+-binding constants of 2.2 +/- 0.2 x 10(4) and 1.2 +/- 0.1 x 10(4) M(-1), CPV3-C72S yields values of 5.0 +/- 0.8 x 10(4) and 2.1 +/- 0.3 x 10(4) M(-1).     

Preparation of novel mercury-doped silver nanoparticles film glassy carbon electrode and its application for electrochemical biosensor

A novel mercury-doped silver nanoparticles film glassy carbon (Ag/MFGC) electrode was prepared in this study. Electrochemical behaviors of cysteine on the Ag/MFGC electrode were investigated by electrochemical impedance spectroscopy and cyclic voltammetry (CV). The results indicated that cysteine could be strongly adsorbed on the surface of the Ag/MFGC electrode to form a thin layer. The doped electrode could catalyze the electrode reaction process of cysteine, and the cysteine displayed a pair of well-defined and nearly reversible CV peaks at the electrode in an acetate buffer solution (pH 5.0). The Ag/MFGC electrode was used for determination of cysteine by differential pulse voltammetry. The linear range was between 4.0x10(-7) and 1.3x10(-5) mol/L, with a detection limit of 1.0x10(-7) mol/L and a signal-to-noise ratio of 3. The relative standard deviation was 2.4% for seven successive determinations of 1.0x10(-5) mol/L cysteine. The determinations of cysteine in synthetic samples and urinal samples were carried out and satisfactory results were obtained. Amperometric application of the Ag/MFGC electrode as biosensors is proposed.     

An amperometric biosensor based on hemoglobin immobilized in poly(epsilon-caprolactone) film and its application

In this study, poly(varepsilon-caprolactone) (PCL) was synthesized using the varepsilon-caprolactone (CL) monomer ring-opening polymerization. We demonstrated that the hemoglobin (Hb) entrapped in PCL film could retain its original conformation by FT-IR spectra. A pair of well-defined redox peaks with a formal potential (E0') of about -0.38V (vs. SCE) in a pH 7.0 phosphate buffer solution was obtained at the Hb-PCL film modified GC electrode. The dependence of [Formula: see text] on the pH of the buffer solution indicated that the conversion of heme Fe(III)/Fe(II) was a reaction of one electron coupled to one proton. The apparent heterogeneous electron transfer rate constants (ks) of Hb confined to PCL was valuated as (18.7+/-0.8)s(-1) according to Laviron's equation. The surface concentration (Gamma*) of the electroactive Hb in the PCL film was estimated to be (7.27+/-0.57)x10(-11)molcm(-2). The Hb-PCL film modified electrode was shown to be an excellent amperometric sensor for the detection of hydrogen peroxide. The linear range is from 2 to 30microM with a detection limit of 6.07x10(-6)M. The sensor was effectively testified by the determination of the hydrogen peroxide in eyedrops as real samples.     

Characterization of azadirachtin binding to Sf9 nuclei in vitro

[22,23-(3)H(2)]dihydroazadirachtin was incorporated by Sf9 cells in culture and was bound specifically to the nuclear fraction. The observed association constant of the binding of the radioligand to a purified nuclear fraction was determined to be 0.037 +/- 0.008 min(-1) using a one-phase exponential association equation, and binding appeared to be to a single population of sites. The binding was essentially irreversible, and the dissociation constant was estimated to be 0.00065 +/- 0.00013 min(-1). An association rate constant of 7.3 x 10(6) M(-1) min(-1) was calculated from these data. Binding was saturable, and the receptor number and affinity were determined as B(max) = 23.87 +/- 1.15 pmol/mg protein, K(d) = 18.1 +/- 2.1 nM. The order of potency of semisynthetic azadirachtin analogues for competition for the binding site was as follows (IC(50) in parentheses): azadirachtin (1.55 x 10(-8) M) > dihydroazadirachtin (3.16 x 10(-8) M) > dansyl dihydroazadirachtin (7.40 x 10(-8) M) > DNP-azadirachtin (7.50 x 10(-8) M) > biotin dihydroazadirachtin (1.27 x 10(-7) M) > 11-methoxy 22,23-dihydroazadirachtin (6.67 x 10(-7) M). [Originally published in Volume 34, Archives of Insect Biochemistry and Physiology, 34:461-473 (1997).] Copyright 1997 Wiley-Liss, Inc.     

Amperometric determination of choline released from rat submandibular gland acinar cells using a choline oxidase biosensor

A choline (CHO) biosensor based on the determination of H(2)O(2) generated at the electrode surface by the enzyme choline oxidase (CHOx) was developed. The biosensor consisted of CHOx retained onto a horseradish peroxidase (HRP) immobilized solid carbon paste electrode (sCPE). The HRPsCPE contained the molecule phenothiazine as redox mediator and CHOx was physically retained on the electrode surface using a dialysis membrane. Several parameters have been studied such as, mediator amount, influence of applied potential, etc. The CHO measurements were performed in 0.1 M phosphate buffer, pH 7.4. Amperometric detection of CHO was realized at an applied potential of 0.0 mV vs Ag/AgCl. The response is linear over the concentration range 5.0x10(-7)-7.0x10(-5) M, with a detection limit of 1.0x10(-7) M. This biosensor was used to detect choline released from phosphatidylcholine (PC) by phospholipase D (PLD) in isolated rat salivary gland cells stimulated by a purinergic agonist (ATP).     

Determination of midecamycin by capillary zone electrophoresis with electrochemical detection

Capillary zone electrophoresis was employed for the determination of midecamycin using an end-column amperometric detection with a carbon fiber micro-disk bundle electrode at a constant potential of +1.15 V vs. saturated calomel electrode. The optimum conditions of separation and detection are 1.00x10(-3) mol l(-1) Na(2)HPO(4)-3.49x10(-4) mol l(-1) NaOH (pH 11.4) for the buffer solution, 20 kV for the separation voltage, 5 kV and 5 s for the injection voltage and the injection time, respectively. The limit of detection is 5.0x10(-7) mol l(-1) or 0.41 fmol (S/N=3). The linear range of the calibration curve is 1.00x10(-6)-1.00x10(-3) mol l(-1). The relative standard deviation is 1.4% for the migration time and 4.9% for the electrophoretic peak current. The method could be applied to the determination of midecamycin in human urine. In this case, a separation voltage of 14 kV was used.     

Electrochemical selective determination of ascorbic acid at redox active polymer modified electrode derived from direct blue 71

A simple selective method for determination of ascorbic acid using polymerized direct blue 71 (DB71) is described. Anodic polymerization of the azo dye DB71 on glassy carbon (GC) electrode in 0.1M H(2)SO(4) acidic medium was found to yield thin and stable polymeric films. The poly(DB71) films were electroactive in wide pH range (1-13). A pair of symmetrical redox peaks at a formal redox potential, E('0)=-0.02V vs. Ag/AgCl (pH 7.0) was observed with a Nernstian slope -0.058V, is attributed to a 1:1 proton+electron involving polymer redox reactions at the modified electrode. Scanning electron microscope (SEM), atomic force microscope (AFM) and electrochemical impedance spectroscopy (EIS) measurements were used for surface studies of polymer modified electrode. Poly(DB71) modified GC electrode showed excellent electrocatalytic activity towards ascorbic acid in neutral buffer solution. Using amperometric method, linear range (1x10(-6)-2x10(-3)M), dynamic range (1x10(-6)-0.01M) and detection limit (1x10(-6)M, S/N=3) were estimated for measurement of ascorbic acid in pH 7.0 buffer solution. Major interferences such as dopamine and uric acid are tested at this modified electrode and found that selective detection of ascorbic acid can be achieved. This new method successfully applied for determination of ascorbic acid in commercial tablets with satisfactory results.     

alpha-Bungarotoxin interacts with the rat brain tachykinin receptors

alpha-Bungarotoxin (alpha Bgt) was shown to inhibit the binding of the 125I-labeled substance P (SP) and eledoisin (EL) to the rat brain membranes with Kl values of 8.0 +/- 5.0 x 10(-8) and 1.1 +/- 0.5 x 10(-6) M, respectively. Lower inhibitory activity was manifested by several other postsynaptically acting snake venom neurotoxins. The alpha Bgt inhibition of SP binding with a Kl value of 8.5 +/- 5.5 x 10(-8) M to solubilized preparations of the rat brain membranes was demonstrated. The capacity to displace SP was found for d-tubocurarine and phencyclidine, although at concentrations considerably higher than those affecting the nicotinic acetylcholine receptors (AChRs). The results obtained suggest that some of the alpha Bgt-binding polypeptides, distinct from neuronal AChRs, may be functionally associated with the tachykinin receptors (TchR).     

Molecular mass and chain conformation of carboxymethylated derivatives of beta-glucan from sclerotia of Pleurotus tuber-regium

Seven water-insoluble (1 --> 3)-beta-D-glucan fractions TM8-1 to TM8-7 with weight-average molecular mass M(w) ranged from 2.22 to 77.4 x 10(4) obtained from the sclerotia of Pleurotus tuber-regium were carboxymethylated to produce the water-soluble fractions CTM8-1 to CTM8-7 with M(w) ranged from 3.87 to 87.8 x 10(4). The degree of substitution (DS) of CTM8 fractions was analyzed by ir and elemental analysis (EA) to be 0.3-0.68. The M(w) and the intrinsic viscosity [eta] of the CTM8 fractions were measured by size-exclusion chromatography combined with multiangle laser light scattering (SEC-MALLS), MALLS, and viscometry in phosphate buffer solution (PBS) at 37 degrees C. The dependencies of [eta] and radius of gyration (z) (1/2) on M(w) for the CTM8 samples were found to be [eta] = (8.82 +/- 0.03) x 10(-3) M(w)(0.78 +/- 0.04) (cm(3) g(-1)) and (z) (1/2) = (3.09 +/- 0.05) x 10(-3) M(w)(0.75 +/- 0.06) (nm) in the M(w) range from 3.87 x 10(4) to 53.2 x 10(4). Based on current theories for wormlike chain model, the conformational parameters of the CTM8 were obtained to be 790 (nm(-1)) for M(L), 9.6 (nm) for q, which were higher than those of the native TM8 fractions, suggesting a more extended flexible chain of CTM8 in PBS. On the whole, the CTM8 fractions showed higher antitumor activity than their corresponding TM8 fractions. In view of data from molecular parameters and bioactivity, the antitumor activity of the CTM8 fractions may be correlated to its water solubility and relatively extended chain.     

Hyphomicrobium bacterial electrode for determination of monomethyl sulfate

A biosensor consisting of physically entrapped monomethyl sulfate (methyl sulfate) degrading bacterium, Hyphomicrobium MS 219, and a combined glass electrode has been developed for the determination of methyl sulfate. The response of the bacterial electrode is linear between 2.5 x 10(-2)M and 6.3 x 10(-1)M methyl sulfate with an effective response to concentrations as low as 10(-3)M and as high as 1M methyl sulfate. The probe has an average slope of 8 mV per concentration decade over the linear range. Response times vary from 5 min in the linear range to 30 min at the detection limit. The sensor has a lifetime of at least 1 week and shows high selectivity to methyl sulfate in the absence of other growth substrates.     

Solution properties of (1-->3)-alpha-D-glucan and its sulfated derivative from Poria cocos mycelia via fermentation tank

From Poria cocos mycelia yielded via a pilot scale facility-fermentation tank, a water-insoluble (1-->3)-alpha-D-glucan coded as Pi-PCM3-I was isolated by extraction with 0.5 M NaOH/0.01 M NaBH(4) aqueous solution. Nine fractions from F1 to F9 with a weight-average molecular mass (M(w)) range from 7.75 x 10(4) to 57.3 x 10(4) were prepared from the Pi-PCM3-I sample by a nonsolvent addition method. The fractions were reacted with chlorosulfonic acid-pyridine complex to product water-soluble sulfated derivatives coded as S1 to S8 with M(w) from 2.36 x 10(4) to 14.5 x 10(4) and degree of substitution (DS) of 0.86-1.38. M(w), z-average radius of gyration (s(2) (z) (1/2)), the second virial coefficient (A(2)), and the intrinsic viscosity ([eta]) of the native and sulfated Pi-PCM3-I were measured by laser light scattering (LLS), size-exclusion chromatography combined with LLS (SEC-LLS), and viscometry at 25 degrees C. The Mark-Houwink equations for Pi-PCM3-I in 0.25 M LiCl/dimethylsulfoxide (DMSO) (Me(2)SO) and for its sulfated derivative in 0.15 M NaCl aqueous solution at 25 degrees C were established to be [eta] = 1.33 x 10(-2) M(w) (0.75+/-0.01) (mL g(-1)) and [eta] = 1.46 x 10(-4) M(w) (1.13+/-0.01) (mL g(-1)), respectively. On the basis of theories for a wormlike cylinder model, the conformational parameters of the native and sulfated Pi-PCM3-I were calculated to be 760 +/- 50 and 1060 +/- 30 nm(-1) for the molar mass per unit contour length (M(L)), 6.3 +/- 0.5 and 13.1 +/- 1 nm for the persistence length (q), and 14.9 +/- 0.2 and 31.8 +/- 1 for the characteristic ratio (C( proportional, variant)), respectively. The results revealed that Pi-PCM3-I existed as an extended flexible chain in 0.25 M LiCl/Me(2)SO, and its sulfated derivative existed as a semistiff chain in 0.15 M NaCl aqueous solution. Furthermore, Pi-PCM3-I possessed similar structure and molecular parameters to wc-PCM3-I from a rotary shaker; this suggests promising industrialization of Poria cocos polysaccharides.     

Chemical structure and chain conformation of the water-insoluble glucan isolated from Pleurotus tuber-regium

A water-insoluble polysaccharide (TM8) was isolated from sclerotium of Pleurotus tuber-regium by extraction with 0.5M NaOH aqueous solutions at 120 degrees C. Its chemical structure was confirmed by infrared, high performance liquid chromatography, gas chromatography, and (13)C NMR in dimethylsulfoxide (DMSO) to be composed of beta-(1 --> 3)-D-glucan backbone chain linked with a branched glucose, one out of every three glycosyl units being substituted at C6 position. The glucan TM8 in DMSO was fractionated by nonsolvent addition method into ten fractions, and the solution properties were studied by size exclusion chromatography combined with multiangle laser light scattering (SEC-MALLS) and viscometry in DMSO at 30 degrees C. The dependencies of intrinsic viscosity [eta] and radius of gyration [(s(2)(1/2)(z-2)] on weight-average molecular mass M(w) for this glucan were found to be [eta] = (9.24 +/- 0.2) x 10(-2)M(w)(0.51 +/- 0.02) (cm(3)g(-1)) and [(s(2)(1/2)(z-2)] = (3.67 +/- 0.3) x 10(-2)M(w)(0.56 +/- 0.02) (nm) in the range of M(w) from 1.07 x 10(4) to 77.4 x 10(4). Based on current theories for a wormlike chain, the conformational parameters of the glucan TM8 were found to be 408 (nm(-1)) for M(L), 3.1 (nm) for q, and 16.8 for C(infinity), suggesting that the polysaccharide exists as a dense random-coil chain in DMSO, due to branched structure.     

Development of DNA electrochemical biosensor based on covalent immobilization of probe DNA by direct coupling of sol-gel and self-assembly technologies

A new procedure for fabricating deoxyribonucleic acid (DNA) electrochemical biosensor was developed based on covalent immobilization of target single-stranded DNA (ssDNA) on Au electrode that had been functionalized by direct coupling of sol-gel and self-assembled technologies. Two siloxanes, 3-mercaptopropyltrimethoxysiloxane (MPTMS) and 3-glycidoxypropyltrimethoxysiloxane (GPTMS) were used as precursors to prepare functionally self-assembly sol-gel film on Au electrode. The thiol group of MPTMS allowed assembly of MPTMS sol-gel on gold electrode surface. Through co-condensation between silanols, GPTMS sol-gel with epoxide groups interconnected into MPTMS sol-gel and enabled covalent immobilization of target NH(2)-ssDNA through epoxide/amine coupling reaction. The concentration of MPTMS and GPTMS influenced the performance of the resulting biosensor due to competitive sol-gel process. The linear range of the developed biosensor for determination of complementary ssDNA was from 2.51 x 10(-9) to 5.02 x 10(-7)M with a detection limit of 8.57 x 10(-10)M. The fabricated biosensor possessed good selectivity and could be regenerated. The covalent immobilization of target ssDNA on self-assembled sol-gel matrix could serve as a versatile platform for DNA immobilization and fabrication of biosensors.     

Amperometric DNA sensor using the pyrroquinoline quinone glucose dehydrogenase-avidin conjugate

A new amperometric DNA sensor was constructed using a pyrroquinoline quinone glucose dehydrogenase ((PQQ)GDH) conjugated with avidin. Our aim was to specifically detect the DNA sequence of the invA virulence gene from the pathogenic bacterium Salmonella. Probe DNA with a sequence complementary to that of a specific fragment of the invA gene was immobilized onto a carbon paste electrode. After hybridization with biotinylated target DNA, (PQQ)GDH-avidin conjugate was added and the resulting electric current was measured. The electric current is generated from glucose oxidization catalyzed by (PQQ)GDH via 1-methoxyphenazine methosulphate (m-PMS) electron mediator. The sensor response increased with the addition of glucose and in the presence of 6.3 mM glucose the response increased with increasing DNA in the range 5.0x10(-8)-1.0x10(-5) M.     

Calcium-bindings of wild type and mutant troponin Cs of Caenorhabditis elegans

Apparent Ca(2+)-binding constant (K(app)) of Caenorhabditis elegans troponin C (CeTnC) was determined by a fluorescence titration method. The K(app) of the N-domain Ca(2+)-binding site of CeTnC was 7.9+/-1.6 x 10(5) M(-1) and that of the C-domain site was 1.2+/-0.6 x 10(6) M(-1), respectively. Mg(2+)-dependence of the K(app) showed that both Ca(2+)-binding sites did not bind competitively Mg(2+). The Ca(2+) dissociation rate constant (k(off)) of CeTnC was determined by the fluorescence stopped-flow method. The k(off) of the N-domain Ca(2+)-binding site of CeTnC was 703+/-208 s(-1) and that of the C-domain site was 286+/-33 s(-1), respectively. From these values we could calculate the Ca(2+)-binding rate constant (k(on)) as to be 5.6+/-2.8 x 10(8) M(-1) s(-1) for the N-domain site and 3.4+/-2.1 x 10(8) M(-1) s(-1) for the C-domain site, respectively. These results mean that all Ca(2+)-binding sites of CeTnC are low affinity, fast dissociating and Ca(2+)-specific sites. Evolutional function of TnC between vertebrate and invertebrate and biological functions of wild type and mutant CeTnCs are discussed.