Entrapment of microbial cells within polyurethane hydrogel beads with the advantage of low toxicity

Summary A new method is described for the entrapment of microbial cells in polyurethane (PUR) hydrogel beads. This hydrogel is produced from a hydrophilic pre-polymer blocked with bisulphite by adjusting the pH between 4 and 6.5. Bisulphite-blocked isocyanate has a substantially lower toxicity against living cells than unblocked (conventional) isocyanates. The poly(carbamoylsulfonate) (PCS) hydrogels have optimal elastic properties and therefore can be used for a matrix of biocatalysts in an agitated reactor as well as in a fluid-bed reactor. The results of ethanol fermentation ofSaccharomyces cerevisiae entrapped in PCS hydrogel beads, and of the denitrification activity of immobilizedParacoccus denitrificans are promising. In contrast, entrapped cells in conventional PUR hydrogels didn’t show any activity.     

Metal complexs of poly (α-amino acids): Cu(II) chelates of acetoacetylated poly(L-lysine), poly(L-ornithine), and poly(L-diaminobutyric acid)

The cupric complexes of poly(N^ε-acetoacetyl-L -lysine), [Lys(Acac)]_n′ poly(N^δ-acetoacetyl-L -ornithine), [Orn(Acac)]_n′ and poly(N^γ-acetoacetyl-L -diaminobutyric acid), [A₂bu-(Acac)]_n, as well as of the model compound n-hexyl acetoacetamide, have been investigated by means of absorption, potentiometric, equilibrium dialysis, and CD measurements. While in the complex of the model compound, one chelating group is bound to one cupric ion, in the polymeric complexes two β-ketoamide groups are bound to Cu(II) under the same experimental conditions. The binding constant of cupric ions to the three polymers and the formation constant of the Cu(II)-nhexylacetoacetamide complex have been evluated. Investigation on the chiroptical properties of the three polymeric complexes shows that the peptide backbone does not undergo conformational transitions, remaining α-helical when up to 20% of the side chains are bound to Cu(II). The optical activity of the β-ketoamide chromophores is substantially affected by complex formation and is discussed in terms of asymmetric induction from the chiral backbone.     

Effects of carbamoylation with alkyl isocyanates on the assay of proteins by dye binding

The effect of carbamoylation with alkyl isocyanate was used both to monitor the stability of the isocyanates and to study the influence of charge modification on protein assay. Carbamoylation of poly (L-lysine) with methyl isocyanate, ethyl isocyanate and 2-chloroethyl isocyanate was observed to decrease binding of methyl orange. The data emphasized the lability of alkyl isocyanates and indicated the importance of preparing aqueous solutions at low temperatures for studies on protein carbamoylation. After carbamoylation of several proteins, there was decreased metachromasia on binding to Coomassie Blue G. Poly (L-lysine) and H1 histone showed anomalous behavior in that with low concentrations of Coomassie Blue G the metachromasia was increased by carbamoylation, but at high concentrations of the dye the metachromasia was decreased by carbamoylation. In contrast to some reports in the literature, the data indicated that there is not always a simple relationship between the positive charge on a protein and the interaction with anionic dyes.     

Influence of Helical Structure on Chiral Recognition of Poly(phenylacetylene)s Bearing Phenylcarbamate Residues of L‐Phenylglycinol and Amide Linage as Pendants

Four poly(phenylacetylene)s ( PPA-1 , PPA-2 , PPA-3 , PPA-4 ) bearing phenylcarbamate residues of L ‐phenylglycinol and amide linkage as pendants were prepared to be used as chiral stationary phases (CSPs) for high‐performance liquid chromatography (HPLC), and the influences of coating solvents, dimethylformamide (DMF) and tetrahydrofuran (THF), which were used for coating the polymers on silica gel, on the helical structure of the polymers and their chiral recognition abilities were investigated. The structure analysis of PPA-1 , PPA-2 , PPA-3 , PPA-4 by ¹H nuclear magnetic resonance (NMR), size exclusion chromatography (SEC), optical rotation, and circular dichroism (CD) spectra indicated that the polymers possess the cis‐transoidal structure with dynamic helical conformation. The polymers in THF seem to have shorter conjugated helical main chains along with a tighter twist conformation than those in DMF. The chiral recognition abilities of PPA-1 , PPA-2 , PPA-3 , PPA-4 with the different helical structures induced by the coating solvents were evaluated as the CSPs in HPLC. The helical structures of PPA-1 , PPA-2 , PPA-3 , PPA-4 induced with THF are preferable for chiral recognition for some racemates compared to those induced with DMF, and higher chiral recognition abilities of PPA-1 , PPA-2 , PPA-3 , PPA-4 were achieved using THF. Chirality 27:500–506, 2015. © 2015 Wiley Periodicals, Inc.     

Alteration of tyrosine aminotransferase multiple form patterns by antisickling agents and a decomposition product of antitumor agents

Antineoplastic agents of the nitrosourea class also have antisickling properties. It has been shown that compounds such as BCNU (1,3-bis-(2-chloroethyl)-1-nitrosourea) decompose under physiological conditions and give rise to substituted isocyanates. The latter are carbamylating agents and, presumably, through such activity have antisickling and antineoplastic activity. In fresh liver homogenates (at 0–4°C) cyanate and 2-chloroethyl isocyanate caused conversion of tyrosine aminotransferase form I to form III. This did not occur with the parent compound BCNU. However, liver homogenates prepared from rats pretreated with BCNU contained significantly more tyrosine aminotransferase form III than controls. Considering the effects that cyanate and isocyanate have on hemoglobin and tyrosine aminotransferase, it is possible that the antineoplastic activity of the nitrosoureas is due to carbamylation of specific regulators of cell division.     

Asymmetric Borane Reduction of Prochiral Ketones Catalyzed By Helical Poly[(S)‐3‐vinyl‐2,2'‐dihydroxy‐1,1'‐binaphthyl]

The application of helical poly[(S)‐3‐vinyl‐2,2'‐dihydroxy‐1, 1'‐binaphthyl] ( L* ) in the asymmetric borane reduction of prochiral ketones was studied. The results showed that L* had excellent catalytic activity as well as enantioselectivity, giving up to 96% yield and up to 99% enantiomeric excess (ee) of the corresponding secondary alcohol at 25 °C. Moreover, L* can be easily recovered and reused without loss of catalytic activity. Chirality 27:422–424, 2015. © 2015 Wiley Periodicals, Inc.     

Aqueous polymer two-phase systems formed by new thermoseparating polymers

A set of new polymers that can be used as phase forming components in aqueous two-phase systems is presented. All polymers studied have thermoseparating properties i.e. form one separate polymer enriched phase and one aqueous solution when heated above the critical temperature. This property makes the polymers attractive alternatives to the polymers used in traditional aqueous two-phase systems such as poly(ethylene glycol) (PEG) and dextran. The thermal phase separation simplifies recycling of the polymers, thus making the aqueous two-phase systems more cost efficient and suitable for use in large scale. Thermoseparating polymers studied have been copolymers of ethylene oxide and propylene oxide (EO-PO), poly (N-isopropylacrylamide) (poly-NIPAM), poly vinyl caprolactam (poly-VCL) and copolymers of N-isopropylacrylamide and vinyl caprolactam with vinyl imidazole (poly(NIPAM-VI) and poly(VCL-VI), respectively). In addition, the copolymer poly(NIPAM-VI) has the property to be uncharged at pH above 7.0 and positively charged at lower pH. This allows the partitioning of protein to be directed by changing the pH in the system instead of the traditional addition of salt to direct the partitioning. Hydrophobically modified EO-PO copolymer (HM-(EO-PO)) with alkyl groups (C₁₄) at both ends forms two-phase system with for example poly(NIPAM-VI). The phase diagram for poly(NIPAM-VI)/HM-(EO-PO) was determined and the model proteins lysozyme and BSA were partitioned in this system. For BSA in poly(NIPAM-VI)/HM-(EO-PO) system a change in pH from 8.0 to 5.4 results in a change of partition coefficient from K=0.8 to K=5.1, i.e. BSA could be transferred from the HM-(EO-PO) phase to the poly(NIPAM-VI) phase. BSA partitioning in poly(NIPAM-VI)/HM-(EO-PO) system allows quantitative BSA recovery, and recoveries of poly(NIPAM-VI) and HM-(EO-PO) were 53% and 92%, respectively, after the thermoseparation step.     

Sequential polypeptides containing arginine as histone models: synthesis and conformational studies

The sequential polypeptides (L -Arg-X-Gly)_n, where X represents amino acid residues Ala, Val, and Leu, were prepared as models of arginine-rich histones to be used in studying their structure and their interactions with DNA. The polymerization was carried out on the pentachlorophenyl active esters of the appropriate tripeptides, while the toluene-4-sulfonyl group was used for protecting the arginine guanido group. CD was employed to investigate the conformation of (L -Arg-X-Gly)_n polymers in aqueous solutions, at different pH, as well as in trifluoroenthanol and hexafluoroisopropyl alcohol solutions. In aqueous solutions (at pH 7 and 12) the prepared sequential polymers behaved as a random coil. The CD spectra in various trifluoroethanol–water or hexafluoroisopropyl alcohol–water mixtures indicated that the degree of helical conformation of the studied polytripeptides increased in the order of Ala → Val → Leu. The opposite was true for the β-structure. Characteristics of β-turn are excluded from the poly(L -Arg-L -Leu-Gly), which assumed the most pronounced helical conformation. The poly(L -Arg-L -Val-Gly) exerts a significant preference to the β-turn structure compared to that of poly(L -Arg-L -Ala-Gly). Thus the probability for helical, β-structure or β-turn conformations of the polymers was analyzed in relation to the bulkiness and length, and to the special features of the X-residue side chain (β-branching). We concluded that the prepared sequential arginine-containing polypeptides are plausible models for histone fractions, f₃ and f₂α₁.     

Ferric complexes of acetoacetyl derivatives of poly(L-lysine), poly(L-ornithine), and poly(L-diaminobutyric acid). II. Conformational properties in solution. Evidence for a stereospecific complex formation

The conformational properties of ferric complexes of poly(N^ε-acetoacetyl-L -lysine), poly(N^δ-acetoacetyl-L -ornithine), and poly(N^γ-acetoacetyl-L -diaminobutyric acid) were investigated in 1:1 water/dioxane by CD techniques. Optical activity was found in the visible and in the uv absorption region of the polymeric complexes. The conformation of the peptide backbone was always that of a right-handed α-helix, and was found independent of the degree of complexation, at least up to a degree of binding of 20%. In the absorption region of the side-chain chromophores the optical activity is substantially affected by complex formation. In all three cases a splitting of the ligand π → π* transition centered at 257 nm is observed. These data suggest a stereospecific complex formation. From the signs of the splitting it also appears that the chirality of the poly(N^δ-acetoacetyl-L -ornithine) complex is opposite that of the other two polymers.     

In Vitro and In Vivo Characteristics of a Thermogelling Rectal Delivery System of Etodolac

Rectal etodolac–Poloxamer gel systems composed of Poloxamer and bioadhesive polymers were developed and evaluated. Hydroxypropylmethyl cellulose, poly)vinyl) pyrrolidone, methyl cellulose, hydroxyethylcellulose, and carbopol were examined as mucoadhesive polymers. The characteristics of the rectal gels differed according to the properties of mucoadhesive polymers. The physicochemical properties such as gelation temperature, gel strength, and bioadhesive force of various formulations were investigated. The analysis of release mechanism showed that the release of etodolac was proportional to the square root of time, indicating that etodolac might be released from the suppositories by Fickian diffusion. The anti-inflammatory effect of etodolac–Poloxamer gel system was also studied in rats. Moreover, liquid suppository of etodolac did not cause any morphological damage to the rectal tissues. These results suggested that in situ gelling liquid suppository with etodolac and mucoadhesive polymer was a physically safe, convenient, and effective rectal dosage form for etodolac.     

The structures and properties of poly-5-methylcytidylic acid

The optical rotatory dispersion properties of poly 5MeC, poly diMeC, and 5MeCMP-(5′) in 0.1M Na+ have been studied at various pH values and temperatures. Poly 5MeC and poly diMeC have optical properties which are similar to those for poly C; however, poly 5MeC has a biphasic melting profile in the pH range from 3.8 to 5.4 similar to that observed for poly 51C. Using titration, ionic strength, and pH dependence measuements, the data for poly 5MeC are interpreted in terms of the following scheme at pH 4.0 and 0.1 ionic strength: triple-strand helix ^37°C double-strand helix ^79°C single-strand coil. Support for this scheme is discussed. The effect of the methyl group is discussed in terms of similar structural possibilities for other polymers of cytidylic acid.     

Synthesis and physicochemical properties in aqueous solution of the sequential polypeptide poly(Tyr-Ala-Glu)

A polypeptide having the repealing sequence (Tyr-Ala-Glu)_n was synthesized by the polymerization of the N-hydroxysuccinimide ester of O-benzyl-L -tyrosyl-L -alanyl-γ-benzyl-L -glutamate, followed by the removal of the benzyl groups by means of hydrogen bromide. The main fraction obtained on gel filtration had an average molecular weight of over 60, 000, corresponding to over 500 amino acid residues per polypcptide chain. The polymer is soluble in water above pH 5.5, and precipitates on lowering the pH. The x-ray powder photographs show features of an α-helical structure. The dependence of the ultraviolet absorption spectrum, the optical rotatory dispersion, and the fluorescence of poly(Tyr-Ala-Glu) on pH, in salt-free as well as in salt-containing aqueous solutions, was compared with the corresponding properties of a copolymer containing equimolar proportions of tyrosine, alanine, and glutamic acid in a random sequence. From these measurements it was concluded that poly(Tyr-Ala-Glu ) has a helical con formation at low pH and a random coil conformation at high pH, the transition taking place at pH 6 in the absence of salt and pH II in the presence of salt. Thus, in the range pH 7 to l0. random coil-to-helix transition can be achieved by merely increasing the ionic strength. A model is proposed for the structure of the helical poly peptide which accounts for the Stability of the helical conformation by assuming hydrogen bonding between the carboxylate group of the ith glutamic acid residue and the hydroxyl group of the (i + 4 )th tyrosine residue. The complex ORD of helical poly(Tyr-Ala-Glu) is explained as being due to a superposition of the ORD of an α-helix and that of a regular array of phenolic ehroniopholes originating from the immobilization of the aromatic rings in the specific structure of the polymer.     

A novel reductive graphene oxide‐based magnetic molecularly imprinted poly(ethylene‐co‐vinyl alcohol) polymers for the enrichment and determination of polychlorinated biphenyls in fish samples

The novel reductive graphene oxide‐based magnetic molecularly imprinted poly(ethylene‐co‐vinyl alcohol) polymers (rGO@m‐MIPs) were successfully synthesized as adsorbents for six kinds of polychlorinated biphenyls (PCBs) in fish samples. rGO@m‐MIPs was prepared by surface molecular imprinting technique. Besides, Fe₃O₄ nanoparticles (NPs) were employed as magnetic supporters, and rGO@Fe₃O₄ was in situ synthesis. Different from functional monomer and cross‐linker in traditional molecularly imprinted polymer, here, 3,4‐dichlorobenzidine was employed as dummy molecular and poly(ethylene‐co‐vinyl alcohol) was adopted as the imprinted polymers. After morphology and inner structure of the magnetic adsorbent were characterized, the adsorbent was employed for disperse solid phase extraction toward PCBs and exhibited great selectivity and high adsorption efficiency. This material was verified by determination of PCBs in fish samples combined with gas chromatography‐mass spectrometry (GC‐MS) method. According to the detection, the low detection limits (LODs) of PCBs were 0.0035–0.0070 µg l⁻¹ and spiked recoveries ranged between 79.90 and 94.23%. The prepared adsorbent can be renewable for at least 16 times and expected to be a new material for the enrichment and determination of PCBs from contaminated fish samples. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of soluble poly(amide-ether-imide-urea)s bearing amino acid moieties in the main chain under green media (ionic liquid)

In this study, an optically active diamine, N,N′-(pyromellitoyl)-bis{N-[4(4-aminophenoxy)phenyl]-2-(4-methyl)pentanamide} (1) containing amino acid l-leucine was prepared in three steps. The step-growth polymerization of this chiral diamine with several diisocyanates in room temperature ionic liquid (IL), 1,3-dipropylimidazolium bromide as an environmentally friendly solvent and in a volatile organic solvent, is investigated. The polymerization yields and inherent viscosities of the resulting poly(amide-ether-imide-urea)s are compared in both solvents. The results show that the IL to be the superior polymerization media. All of the obtained polymers exhibited good solubility in some polar aprotic organic solvents such as N,N-dimethyacetamide, N,N-dimethyformamide, dimethyl sulfoxide while thermal stability was not disturbed based on thermogravimetric analysis and differential scanning calorimetry experiments. X-ray diffraction analysis of polymers shows that they are amorphous. The observation of optical rotation confirms the optical activity of prepared polymers.     

Matrix-method calculation of linear and circular dichroism spectra of nucleic acids and polynucleotides

Calculations of the optical properties (absorption, linear dichroism, circular dichroism, and anisotropic components of the CD) are presented for polynucleotides of random or regular sequence within the formalism of the matrix method using a set of parameters that includes only the ππ* transitions of the aromatic bases. Experimental solution spectra agree favorably with calculated CD spectra for A-RNA, A-DNA, and B-DNA, when coordinates derived from x-ray studies on fibers are used. Excessive hypochromicity is predicted when parameters intended to reproduce the vacuum-uv absorption of the chromophores are included in the calculations, but total elimination of these parameters leads to an insufficient hypochromicity for the long-wavelength absorption band. Using alternative conformations for DNA in low-salt aqueous solution did not improve the agreement between experimental and calculated spectra, but some features of the optical properties predicted for these variant structures suggest that the tilt of the bases with respect to the helical axis may be larger than that of the fiber B-form. In the case of polynucleotides with regular structure, which have been traditionally less easy to understand in terms of the standard nucleic acid conformations, a series of alternative structures has been examined. Unexpectedly, the calculated spectrum for the Z-DNA structure compares almost quantitatively with the experimental spectrum of poly(dGC·dGC) in low salt. This result, which confirms a recent report [Vasmel, H. & Greve, J. (1981) Biopolymers 20 , 1329–1332], is in contrast with the current identification of Z-DNA with the high-salt form of poly(dGC·dGC). Finally, the optical properties of single-stranded polyribonucleotides appear to be better explained when alternative structures [9₁-helix for poly(rA) and 6₁-helix for poly(rC)] are introduced instead of the A-RNA form.     

Isocyanates induces DNA damage,apoptosis, oxidative stress,and inflammation in cultured human lymphocytes

Isocyanates, a group of low molecular weight aromatic and aliphatic compounds containing the isocyanate group (?NCO), are important raw materials with diverse industrial applications; however, pathophysiological implications resulting from occupational and accidental exposures of these compounds are hitherto unknown. Although preliminary evidence available in the literature suggests that isocyanates and their derivatives may have deleterious health effects including immunotoxicity, but molecular mechanisms underlying such an effect have never been addressed. The present study was carried out to assess the immunotoxic response of methyl isocyanate (MIC) on cultured human lymphocytes isolated from healthy human volunteers. Studies were conducted to evaluate both dose‐dependent and time‐course response (n = 3), using N‐succinimidyl N‐methylcarbamate, a surrogate chemical substitute to MIC. Evaluation of DNA damage by ataxia telangiectasia mutated (ATM) and γ H2AX protein phosphorylation states; measure of apoptotic index through annexin‐V/PI assay, apoptotic DNA ladder assay, and mitochondrial depolarization; induction of oxidative stress by CM‐H2DCFDA and formation of 8‐hydroxy‐2′ deoxy guanosine; levels of antioxidant defense system enzyme glutathione reductase; and multiplex cytometric bead array analysis to quantify the secreted levels of inflammatory cytokines, interleukin‐8, interleukin‐1β, interleukin‐6, interleukin‐10, tumor necrosis factor, and interleukin‐12p70 parameters were carried out. The results of the study showed a dose‐ and time‐dependent response, providing evidence to hitherto unknown molecular mechanisms of immunotoxic consequences of isocyanate exposure at a genomic level. We anticipate these data along with other studies reported in the literature would help to design better approaches in risk assessment of occupational and accidental exposure to isocyanates. © 2008 Wiley Periodicals, Inc. J Biochem Mol Toxicol 22:429–440, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/jbt.20260     

Polymer displacement/shielding in protein chromatography

An overview of different applications of polymer interactions with ion-exchange and dye-affinity chromatographic matrices is presented here. The strength of interaction between the ligand and the polymer plays a crucial role in deciding the mode of chromatographic application. Charged, non-ionic and thermosensitive polymers such as poly(ethylene imine), poly(N-vinyl pyrrolidone) and poly(vinyl caprolactam) respectively, show different degrees of interaction with the dye molecules in dye ligand chromatography. Polymers, with their ability of multipoint and hence strong attachment to the chromatographic matrices, were used as efficient displacers in displacement chromatography. The polymer displacement resulted in better recoveries and sharper elution profiles than traditional salt elutions. The globule–coil transition of the thermosensitive reversible soluble–insoluble polymer, poly(vinyl caprolactam), can be exploited in dye-affinity columns for the temperature induced displacement of the bound protein. In another situation, prior to the column chromatography of crude protein extract, polymers formed complexes with the dye matrix and “shielded” the column. The polymer shielding decreased the nonspecific interactions without affecting the specific interactions of the target protein to the dye matrix.     

Carbamoylating Activity Associated with the Activation of the Antitumor Agent Laromustine Inhibits Angiogenesis by Inducing ASK1-Dependent Endothelial Cell Death

The anticancer agent 1,2-bis(methylsulfonyl)-1-(2-chloroethyl)-2-[(methylamino)carbonyl]hydrazine (laromustine), upon decomposition in situ, yields methyl isocyanate and the chloroethylating species 1,2-bis(methylsulfonyl)-1-(2-chloroethyl)hydrazine (90CE). 90CE has been shown to kill tumor cells via a proposed mechanism that involves interstrand DNA cross-linking. However, the role of methyl isocyanate in the antineoplastic function of laromustine has not been delineated. Herein, we show that 1,2-bis(methylsulfonyl)-1-[(methylamino)carbonyl]hydrazine (101MDCE), an analog of laromustine that generates only methyl isocyanate, activates ASK1-JNK/p38 signaling in endothelial cells (EC). We have previously shown that ASK1 forms a complex with reduced thioredoxin (Trx1) in resting EC, and that the Cys residues in ASK1 and Trx1 are critical for their interaction. 101MDCE dissociated ASK1 from Trx1, but not from the phosphoserine-binding inhibitor 14-3-3, in whole cells and in cell lysates, consistent with the known ability of methyl isocyanate to carbamoylate free thiol groups of proteins. 101MDCE had no effect on the kinase activity of purified ASK1, JNK, or the catalytic activity of Trx1. However, 101MDCE, but not 90CE, significantly decreased the activity of Trx reductase-1 (TrxR1). We conclude that methyl isocyanate induces dissociation of ASK1 from Trx1 either directly by carbamoylating the critical Cys groups in the ASK1-Trx1 complex or indirectly by inhibiting TrxR1. Furthermore, 101MDCE (but not 90CE) induced EC death through a non-apoptotic (necroptotic) pathway leading to inhibition of angiogenesis in vitro. Our study has identified methyl isocyanates may contribute to the anticancer activity in part by interfering with tumor angiogenesis.     

Stimulation of ligninolytic enzyme production in Phanerochaete chrysosporium by polyoxyalkanes

AIMS: Poly(ethylene glycol) (PEG) and some substances similar to PEG in chemical structure were tested as stimulators of ligninolytic enzyme production in shaken culture of Phanerochaete chrysosporium. METHODS AND RESULTS: The substances that caused high enzymatic activity were linear polymers [poly(ethylene glycol), poly(propylene glycol), poly(butylene glycol) and poly(vinyl alcohol)] and cyclic polymers (crown ether). They can have terminal groups other than -OH [PEG (di)methyl ether, PEG sulphate, PEG derivative with the amino group and xanthate]. The maximum lignin peroxidase activities were compared with the surface pressure caused by the stimulator. Addition of polymers composed of charged monomer units did not increase the enzymatic activity and the fungi did not grow at all on addition of polymers having a fixed positive charge. CONCLUSIONS: Lignin peroxidase activity was increased after the addition of polymers with uncharged monomer units. It was higher and its maximum was reached in a shorter time on addition of polymers with higher molecular weights. SIGNIFICANCE AND IMPACT OF STUDY: Beside Tweens there are several polymers that stimulate ligninolytic enzyme production in shaken culture of P. chrysosporium. Their characteristics are: similarity to PEG in chemical structure, having uncharged monomer units and high molecular weight.     

Utilization of 3-ethyl-1(N,N-dimethyl)aminopropylcarbodiimide (EDCI)/1-hydroxybenzotriazole (HOBt) as a polymerizing agent

Summary The commonly used coupling reagents in peptide syntheses such as dicyclohexylcabodiimide, diisopropyl-carbodiimide and 3-ethyl-1(N,N-dimethyl)aminopropylcarbodiimide with or without 1-hydroxybenzotriazole or N-hydroxysuccinimide have been used as polymerizing agents in the synthesis of elastic/plastic protein-based polymers. It was found that 3-ethyl-1(N,N-dimethyl)aminopropylcarbodiimide with 1-hydroxybenzotriazole gave equally good polymers comparable to conventionalp-nitrophenol approach. Further, we present here the polymerization and characterization of structural and functional properties of poly(Val-Pro-Gly-Val-Gly), which is the most striking repeating sequence in the bovine and porcine elastins. The polymers obtained by bothp-nitrophenol and 3-ethyl-1(N,N-dimethyl)aminopropylcarbodiimide approach were characterized by carbon-13 and proton nuclear magnetic resonance spectroscopy, differential scanning calorimetry, circular dichroism and fourier transform infrared spectroscopy. These results conclude that poly(Val-Pro-Gly-Val-Gly) obtained by both methods were identical in all respects of physical and chemical properties indicates that 3-ethyl-1(N,N-dimethyl)aminopropylcarbodiimide with 1-hydroxybenzotriazole method can be conveniently employed to synthesize these polymers.