Aberrant growth of maxillary canine teeth in male babirusa (genus Babyrousa)

A worldwide survey of babirusa skulls curated in museum and private collections located 431 that were from adult males and had retained at least one maxillary canine tooth. Eighty-three of these skulls were identified as exhibiting aberrant maxillary canine tooth growth. Twenty-four of the skulls represented babirusa from Buru and the Sula Islands, and forty-five skulls represented babirusa from Sulawesi and the Togian Islands. The remaining series of fourteen babirusa skulls originally came from zoo animals. Fifteen skulls showed anomalous alveolar and tooth rotation in a median plane. Twenty-nine skulls had maxillary canine teeth that did not grow symmetrically towards the median plane of the cranium. Fourteen skulls showed evidence that the tips of one or both maxillary canine teeth had eroded the nasal bones. Twenty-one skulls had maxillary canine teeth that had eroded the frontal bones. The teeth of two skulls had eroded a parietal bone. One skull had two maxillary canines arising from an adjacent pair of alveoli on the left side of the cranium. Three skulls exhibited alveoli with no formed maxillary canine teeth in them. Analysis suggested that approximately 12% of the adult male babirusa in the wild experience erosion of the cranial bony tissues as a result of maxillary canine tooth growth. There was no skeletal evidence that maxillary canine teeth penetrate the eye.     

Cheek tooth erosion in male babirusa (genus Babyrousa)

The wear on the occlusal surfaces of male babirusa cheek teeth was evaluated in 53 skulls of Babyrousa babyrussa from Buru and the Sula Islands and 87 skulls of B. celebensis from Sulawesi, Indonesia. Based on the comparative lengths of their continually growing maxillary canine teeth, the skulls were divided into five ‘age categories’ (A–E). Numerical and symbolic codes representing tooth wear were applied to each pillar (cusp region) of the mandibular and maxillary permanent third and fourth premolar teeth, and the first, second and third permanent molar teeth. There was no significant difference between the tooth wear patters of skulls in groups A and B, or in groups C and D, and so these were amalgamated. There was close correspondence in wear patterns between each side of the mouth in both species and in each age group. The wear patterns of the mandibular and maxillary teeth, although not identical, were very similar, as were the wear patterns of both species. In group A + B for both species tooth wear was relatively slight, with the M1 teeth experiencing most relative wear. There was almost no wear of the M3 teeth. In group C + D substantial wear of upper and lower M1 was evident. In group E more widespread wear of the cheek teeth was seen, with increased severity of M1 tooth wear, yet there was comparatively much less M2 and M3 tooth wear. The pattern of cheek tooth wear of the Babyrousa spp. was different from that shown by Sus scrofa. Differences in diet selection and processing were highlighted as potential contributing factors. The pattern of cheek tooth wear in male babirusa was not adequate for use to monitor their age.     

Periodontal defects of pulpal origin: evidence in early man

False assumptions have led to the widespread opinion that periodontitis of gingival origin is a ubiquitous disease and a common cause of tooth loss among ancient populations. Evaluation of dry skulls reveals that horizontal loss of crestal alveolar bone was unusual and of minor severity. Localized vertical bone defects of pulpal etiology were common and severe, often resulting in tooth mortality. The present paper identifies a number of factors that have contributed to the development of some important misconceptions about the nature of periodontal disease, its incidence, and its etiology.     

Functional cues in the development of osseous tooth support in the pig, Sus scrofa

Alveolar bone supports teeth during chewing through a ligamentous interface with tooth roots. Although tooth loads are presumed to direct the development and adaptation of these tissues, strain distribution in the alveolar bone at different stages of tooth eruption and periodontal development is unknown. This study investigates the biomechanical effects of tooth loading on developing alveolar bone as a tooth erupts into occlusion. Mandibular segments from miniature pigs, Sus scrofa, containing M₁ either erupting or in functional occlusion, were loaded in compression. Simultaneous recordings were made from rosette strain gages affixed to the lingual alveolar bone and the M₂ crypt. Overall, specimens with erupting M₁s were more deformable than specimens with occluding M₁s (mean stiffness of 246 vs. 944 MPa, respectively, p=0.004). The major difference in alveolar strain between the two stages was in orientation. The vertically applied compressive loads were more directly reflected in the alveolar bone strains of erupting M₁s, than those of occluding M₁s, presumably because of the mediation of a more mature periodontal ligament (PDL) in the latter. The PDL interface between occluding teeth and alveolar bone is likely to stiffen the system, allowing transmission of occlusal loads. Alveolar strains may provide a stimulus for bone growth in the alveolar process and crest.     

整体铸造支架式可摘局部义齿添加人工牙的临床修理效果

目的：探讨整体铸造支架式可摘局部义齿添加人工牙的修理体会。方法：对240例佩戴整体铸造支架式可摘局部义齿的患者进行义齿添加人工牙修理,比较修理前后视觉模拟（VAS）评分、咀嚼功能及1年后人工牙的磨耗程度。结果：修复后VAS评分明显低于修复前,两者比较差异有统计学意义（P〈0.05）,但牙槽骨吸收距离未见明显差异（P〉0.05）。经过修复后义齿的固位稳定及咀嚼情况较修复前明显好转,在随访1年后,人工牙大多有轻到中度的磨耗,磨耗后出现23例颌位垂直距离缩短及2例下颌前移及偏移。结论：设计合理的支架连接体,并且尽量作添加人工牙和卡环的修理,可以延长义齿的使用寿命。     

Disarming canine teeth of nonhuman primates using the submucosal vital root retention technique.

Removing or reducing the size of canine teeth of baboons and macaques has become an accepted practice to minimize the potential for injury to laboratory animal care personnel. A submucosal vital root retention procedure was adapted from the technique of root banking human teeth. In this technique, the crown of a tooth is amputated below the level of the alveolar bone crest, and the exposed pulp covered by a mucoperiosteal gingival flap. Our aim was to disarm the canine teeth of baboons and macaques with a single surgical procedure that would preserve a vital tooth root buried in alveolar bone under normal mucosa. Our long-term objective was to develop a technique that would not require further clinical management during the life of the animal. This paper presents the surgical techniques used.     

Periodontal disease in the Mycenean (1450–1150 BC) population of Aghia Triada, W. Peloponnese, Greece

This study investigates the incidence of periodontitis in a Mycenaean population unearthed at the cemetery of Aghia Triada (West Peloponnese, Greece) during the 1989–1997 field season. The material consists of 172 dry skulls. Demographic parameters of sex and age were difficult to be assigned due to the bad state of preservation of the skeletal material. The ratio was 50 males, 48 females, 65 unidentified and 9 children, and we estimated an average age of 38 years. In this work we used traditional and modern methods to determine the incidence of periodontitis in the archeological human dental bone. We also recorded other dental diseases, such as ante mortem tooth loss, caries and attrition. The results showed that periodontitis has affected 35% of the jaws. A notable percentage of the individuals — 24% — lost three or more teeth during their lifetime and a total 53% of the population had extracted teeth before death. This paper points out that the ancient jaws present a high proportion of ante-mortem tooth loss, attrition and deep caries, whereas the frequency of periodontitis does not seem to differ from that of other prehistoric samples.     

Tooth wear and the position of the mental foramen

Variation in the position of the mental foramen with respect to the teeth ("apparent" position) seems to be associated with race, but in the determination of this position, factors which affect the disposition of the teeth plainly have a bearing on the results. The apparent position was investigated in a sample of southern Chinese skulls of known age which were classified by the degree of tooth wear. Controlling for "true" position and size of the mandible, a highly significant correlation between wear and position was found, age and tooth size having no significant contribution as additional explanatory variables. The effect of tooth wear on the apparent position of the foramen may partly explain racial variation.     

Connecting morphology, function and tooth wear in microchiropterans

A key objective in understanding the dentition of mammals is the ability to predict the function of teeth from their shape. Very few studies have used dental measurements that allow the prediction of comparative tooth effectiveness, particularly when modification in shape due to tooth wear is considered. Here, dental parameters are used in which a change in the parameter is readily interpretable in terms of change in factors such as increased force or energy required for cusps or crests to break down food. The functional parameters were measured for 3-D digital tooth reconstructions of the upper molars of the microchiropteran Chalinolobus gouldii at various stages of tooth wear. The changes in the majority of the parameters, such as decreased tip, edge and cusp sharpnesses, cusp occlusion relief, rake angle and fragment clearance, predict a deterioration in efficacy with increased wear. This conclusion has not been possible with alternative approaches; for instance, there was no significant change in crest length with wear, and so no change in function would be predicted from that measure. Some of the parameters did not change significantly with heavy wear, such as capture area of a crest, pointing to geometrical and design characteristics for the maintenance of shape with wear in the dilambdodont tooth form. Attrition and abrasion can be considered as wear on the relief and rake surfaces of tribosphenic-like crests, respectively. The differences in function of these two surfaces account for the differences in wear patterns.  © 2005 The Linnean Society of London, Biological Journal of the Linnean Society , 2005, 85 , 81–96.     

Tissue engineered hybrid tooth-bone constructs

Proper rehabilitation of craniofacial defects is challenging because of the complexity of the anatomy and the component tissue types. The ability to simultaneously coordinate the regeneration of multiple tissues would make reconstruction more efficient and might reduce morbidity and improve outcomes. The craniofacial complex is unique because of the presence of teeth, in addition to skin, bone, cartilage, muscle, vascular, and neural tissues since teeth naturally grow in coordination with the craniofacial skeleton, our group developed an autologous, tooth-bone hybrid model to facilitate repair of mandibular defects in the Yucatan minipig. The hybrid tooth-bone construct was prepared by combining tooth bud cell-seeded scaffolds with autologous iliac crest bone marrow derived stem cell-seeded scaffolds, which were transplanted back into surgically created mandibular defects in the same minipig. The constructs were harvested after 12 and 20 weeks of growth. The resulting bone/tooth constructs were evaluated by X-ray, ultra high-resolution volume computed tomography (VCT), histological, immunohistochemical analyses, and transmission electron microscopy (TEM). The observed formation of small tooth-like structures consisting of organized dentin, enamel, pulp, cementum, periodontal ligament, and surrounded by regenerated alveolar bone, suggests the feasibility for regeneration of teeth and associated alveolar bone, in a single procedure. This model provides an accessible method for future clinical applications in humans.     

The influence of tooth wear on root canal dimensions

The objective was to investigate the relations between tooth wear and root canal dimensions. The experimental group comprised 100 cuspids (canines), 50 of which had advanced abrasion and 50 were without it The dimensions of root canal were investigated at the light microscope level in order to define their vestibulo-oral and mesio-distal diameters in all three thirds. In the groups of teeth without abrasion the MD diameters of root canaliculi in their cervical thirds were greater than in the teeth with advanced abrasion. In the apical third the MD diameters of canaliculi were highly variable in teeth with no signs of abrasion. In the group of teeth with abrasion the MD and VO diameter values of the cervical thirds were significantly smaller than in the group of teeth without abrasion. In the mid-thirds the values of MD diameters were highly variable in the group of teeth with abrasion, whereas the VO diameter values were much greater than in the teeth without abrasion. As regards to the apical thirds, the VO diameter values were greater than in the control teeth. The data presented herewith contribute to better knowledge about tooth wear and are highly useful in restorative and reconstructive dental procedures.     

Relation of dental wear to the concentrations of essential minerals in teeth of the California sea lion <Emphasis Type="Italic">Zalophus Californianus Californianus</Emphasis>

Tooth wear in marine mammals has been attributed to age, feeding habits, behavior, and contaminants. Advanced tooth wear in some California sea lions, including some of very young age (<5 yr), in the Gulf of California, suggests that there are variations in chemical composition of tooth parts, wherein the concentrations of certain trace minerals might be anomalous, making them more susceptible to erosion. The concentrations of the essential minerals Ca, P, K, Na, Fe, Mg, and Zn in the dentition of Zalophus c. californianus are documented for the first time and are compared for sea lion teeth with different degrees of wear. Canine teeth and molars from 45 skulls collected at 15 localities since 1978 were digested in perchloric acid and analyzed using atomic adsorption spectrometry, the results being expressed in milligrams per 100 g. An index of tooth wear (Id) was established, involving the average wear on the teeth and the age of the organism. No significant difference was detected in the variables, but there was one between ages (p=0.02). A higher degree of wear was observed up to 7 yr of age than from this age onward. Mineral concentrations did not explain the excessive wear observed (correlation, p>0.09; ANOVA, p>0.15); however, the Ca concentration of the teeth was inversely proportional to the age of the animal (sexes combined, p=0.026) and particularly significant for the females (r ²=0.112, r=−0.335, p=0.039). Females could be more prone to decalcification because of their annual bone investment in their offspring. Animals of both sexes were susceptible to tooth wear as their age increased, but the higher frequency of animals between 4 and 7 yr suggests an impact on survival at early stages probably linked to deficient feeding and chronic malnutrition.     

Age,sex, and antemortem loss of teeth in prehistoric Eskimo samples from point hope and Kodiak Island,Alaska

The incidence of teeth lost antemortem was investigated in 244 archeologically derived dried skeletal specimens from the Ipiutak and Tigara burials at Point Hope, Alaska, and 83 Koniag Eskimo specimens excavated at Jones Point, Uyak Bay, Kodiak Island, Alaska. Ipiutak skeletal remains date from approximately 1500 years B.P. and the Tigara remains from 300–400 years B.P. The Kodiak Island sample is undated. Specimens were sexed and aged in five-year groupings using standard techniques. Teeth lost antermortem were identified as having occupied tooth sockets which showed healing of alveolar bone following exfoliation. Numbers of lost teeth were calculated as percentages of total number of tooth sites of each tooth classification for each age, sex, and site subgrouping. Tooth loss was very low in the Kodiak Island sample, with little difference between sexes and no identifiable age trends. The Tigara ramains displayed moderate tooth loss, with strong correlations to increasing age and little differentiation between the sexes. The Ipiutak specimens lost the most teeth antemortem, with notable between-sex differences and strong correlations with increasing age. In all groups loss of anterior teeth was probably due to accident or heavy wear, while loss of posterior teeth was due to heavy wear, periodontal disease, or agenesis.     

Patterns of approximal wear in cheek teeth of a Romano-British population

The approximal surfaces of premolars and molars of 376 adult British-Romano skulls were examined for wear facets. The type of wear was designated as convex, concave, sigmoid, or flat, and the degree was categorised on a three-point scale. Concave wear facets were more frequently seen in the older age groups, but the type of wear was similar on right and left sides. Taking all teeth together or as individual tooth types, concave wear was significantly more likely on mesial rather than distal surfaces. The degree of wear was age related and similar on right and left sides in both males and females. It is suggested that the distribution of concave facets may be related to movements between adjacent teeth.     

Tooth wear and compensatory modification of the anterior dentoalveolar complex in humans

In populations living in environments where teeth wear severely, some compensatory modification of the dentoalveolar complex is thought to occur during life whereby functional occlusion is maintained as tooth substance is lost by wear. This study investigates one aspect of this modification process: Changes in the anterior dentoalveolar complex that are accompanied with wear were examined in a series of Japanese skeletal samples. In the prehistoric Japanese hunter-gatherer population heavy wear occurs over the entire dentition. The following changes were demonstrated to have occurred in the anterior segment of the dentition accompanied by wear on the anterior teeth: The anterior teeth tip lingually with wear up to a nearly upright position to fill in interproximal spaces that would have been generated by wear, and to maintain contact relations between adjacent teeth. At the same time, the anterior surface of the maxillary alveolar process also inclines lingually to a certain extent. The amount of lingual tipping is greater in the maxillary anterior teeth than in their mandibular antagonists. It is because of this discrepancy that, with age, the horizontal component of the overlap between maxillary and mandibular anterior teeth decreases, and their bite form changes from scissor bite to edge-to-edge bite. Lesser degrees of lingual tipping of the anterior teeth were also detected in the prehistoric agriculturists and historic Japanese populations. The variation in the degree of lingual tipping observed among the samples is explained by inter-population variation in severity and pattern of tooth wear. This and other evidence suggests that mechanisms that compensate for wear in the anterior dentition may be characteristic of all living human populations, independently of the degree of wear severity endured in their environments.     

Low-Intensity Pulsed Ultrasound Accelerates Tooth Movement via Activation of the BMP-2 Signaling Pathway

The present study was designed to determine the underlying mechanism of low-intensity pulsed ultrasound (LIPUS) induced alveolar bone remodeling and the role of BMP-2 expression in a rat orthodontic tooth movement model. Orthodontic appliances were placed between the homonymy upper first molars and the upper central incisors in rats under general anesthesia, followed by daily 20-min LIPUS or sham LIPUS treatment beginning at day 0. Tooth movement distances and molecular changes were evaluated at each observation point. In vitro and in vivo studies were conducted to detect HGF (Hepatocyte growth factor)/Runx2/BMP-2 signaling pathways and receptor activator of NFκB ligand (RANKL) expression by quantitative real time PCR (qRT-PCR), Western blot and immunohistochemistry. At day 3, LIPUS had no effect on the rat orthodontic tooth movement distance and BMP-2-induced alveolar bone remodeling. However, beginning at day 5 and for the following time points, LIPUS significantly increased orthodontic tooth movement distance and BMP-2 signaling pathway and RANKL expression compared with the control group. The qRT-PCR and Western blot data in vitro and in vivo to study BMP-2 expression were consistent with the immunohistochemistry observations. The present study demonstrates that LIPUS promotes alveolar bone remodeling by stimulating the HGF/Runx2/BMP-2 signaling pathway and RANKL expression in a rat orthodontic tooth movement model, and LIPUS increased BMP-2 expression via Runx2 regulation.     

阻生牙拔除术的临床进展

阻生牙是指由于各种阻力导致不能正常萌出的牙齿的统称,通常阻生牙牙体大部甚至全部埋伏于骨内。阻生牙可导致各种并发症的发生,因此临床上一般主张预防性拔除阻生牙。阻生牙拔除手术因其难度高、风险大、术后反应重一直是口腔牙槽外科关注的重点。近年来随着手术器械、手术观念等方面的进步,阻生牙拔除术取得了一些临床进展。新型CT扫描设备CBCT可以为手术设计提供精确定位;借助各类微创器械,微创拔牙技术减小了手术创伤,降低了手术风险;新型麻醉方式和新型局麻药物可以极大减轻疼痛反应;心理干预也将成为阻生牙拔除患者围手术期管理的重要步骤。本文对近年来阻生牙拔除术在定位方式、微创技术、团队协作、疼痛控制和心理干预等方面的临床进展做一综述。     

阻生牙拔除术的临床进展

阻生牙是指由于各种阻力导致不能正常萌出的牙齿的统称,通常阻生牙牙体大部甚至全部埋伏于骨内。阻生牙可导致各种并发症的发生,因此临床上一般主张预防性拔除阻生牙。阻生牙拔除手术因其难度高、风险大、术后反应重一直是口腔牙槽外科关注的重点。近年来随着手术器械、手术观念等方面的进步,阻生牙拔除术取得了一些临床进展。新型CT扫描设备CBCT可以为手术设计提供精确定位;借助各类微创器械,微创拔牙技术减小了手术创伤,降低了手术风险;新型麻醉方式和新型局麻药物可以极大减轻疼痛反应;心理干预也将成为阻生牙拔除患者围手术期管理的重要步骤。本文对近年来阻生牙拔除术在定位方式、微创技术、团队协作、疼痛控制和心理干预等方面的临床进展做一综述。     

Reproduction and differentiation of cells in the tissues of growing rat teeth in response to parathyroid hormone and hydrocortisone

Influence of parathyroid hormone (PTH) and hydrocortisone (HC) on growth and development of teeth during prefunctional period has been studied, employing radioactive tracers. Biosynthetic and reproductive activity of cells is estimated in the molar and incisor tissues. It has been established that PTH accelerates the process of local resorption of the bone along the alveolar crest, but does not influence upon the teeth growth, functional and reproductive activity of the pulp cells. HC inhibits protein and glycoprotein synthesis, decreases amount of proliferating cells, accelerates their differentiation and, thus, delays formation of the root and tooth growth.