Peptide design 310-helical conformation of a linear pentapeptide containing two dehydrophenylalanines,Boc-Gly-ΔZPhe-Leu-ΔZPhe-Ala-NHCH3

α, β-Dehydroamino acids are expected to provide conformational constraint to the peptide backbone. A pentapeptide containing two dehydrophenylalanines (Δ^ZPhe) separated by one L -amino acid has been synthesized and its solid state conformation determined. The pentapeptide, Boc-Gly-Δ^ZPhe-Leu-Δ^ZPhe-Ala-NHCH₃, crystallizes from aqueous methanol in the orthorhombic space group P2₁2₁2₁. There are four formula units, C₃₅H₄₆N₆O₇, in a unit cell of dimensions a = 10.155(3), b = 15.175(1), and c = 23.447(2) Å, at room temperature. The structure was solved by direct methods program, SIR88, and refined to a final R = 0.038 based on 3049 reflections with I > 2σ(I). All the peptide links are trans and the backbone conformation of the pentapeptide can be described as a 3₁₀-helix, with mean ?, ψ values of ?65.1° and ?22.8° (the value is averaged over the first four residues). There are four intramolecular 4 → 1 type hydrogen bonds characteristic of 3₁₀-type helices. In the crystal, the helices are held together by intermolecular N? H…?O?C head-to-tail and lateral hydrogen bonding between symmetry related molecules. This mode of packing is similar to the packing motifs observed so often in other oligopeptides that adopt a 3₁₀-helical structure. © 1993 John Wiley & Sons, Inc.     

Defect peptide chemistry: Perturbations in the structure of a homopentapeptide induced by a guest residue interrupting side-chain regularity

The fully blocked pentapeptide Tfa-(Deg)₂-L -Abu-(Deg)₂-OtBu (Tfa:triflouroacetyl; Deg: C^α,α-diethylglycine; OtBu: tert-butoxy) adopts in the crystal state a regular, right-handed 3₁₀-helical structure stabilized by three N ? H …? O ? C intramolecular 1 ← 4 (or C₁₀) H bonds, as determined by an x-ray diffraction analysis. However, a Fourier transform ir absorption and ¹H-nmr study strongly supports the view that in deuterochloroform solution the four Deg residues at both termini of the peptide main chain are involved in successive, fully extended C₅ forms. A comparison with the stable, fully developed, multiple C₅ conformation of Tfa-(Deg)₅-OtBu indicates that incorporation of an Abu guest residue, interrupting the side-chain uniformity of the host (Deg)₅ homopeptide, while altering only marginally the conformation in a solvent of low polarity, is responsible for a dramatic perturbation of the crystal-state structure. © 1994 John Wiley & Sons, Inc.     

Design of peptides using α,β-dehydro-residues: Synthesis,crystal structure and molecular conformation of Boc-L-Val- ΔPhe-ΔPhe-L-Val-OCH3

The peptide Boc-L-Val-ΔPhe-ΔPhe-L-Val-OCH₃ was synthesized by the azlactone method in solution phase, and its crystal and molecular structures were determined by x-ray diffraction method. Single crystals were grown by slow evaporation from a methanol/water solution at 6°C. The crystals belong to an orthorhombic space group P2₁2₁2₁ with a = 10.478 (6) Å, b = 13.953 (1), c = 24.347 (2) and Z = 4. The structure was determined by direct methods and refined by least squares procedure to an R value of 0.052. The structure consists of a peptide and a water molecule. The peptide adopts two overlapping β-turn conformations of Types II and I′ with torsion angles: ϕ₁ = -54.8 (6), ψ₁ = 130.5 (4), ϕ₂ = 65.8 (5), ψ₂ = 12.8 (6), ϕ₃ = 79.4 (5), ψ₃ = 3.9 (7)°. The conformation is stabilized by intramolecular hydrogen bonds involving Boc CO and NH of ΔPhe³ and CO of Val¹ and NH of Val⁴. The molecules are tightly packed in the unit cell. The crystal structure is stabilized by hydrogen bonds involving NH of ΔPhe² and CO of a symmetry related (x-½, ½ -y, -z) ΔPhe². The solvent-water molecule forms two hydrogen bonds with peptide molecule involving NH of Val¹ as an acceptor and another with CO of a symmetry related (1 -x, y-½, ½ -z) ΔPhe³ as a donor. These studies indicate that a tetrapeptide with two consecutive ΔPhe residues sequenced with valines on both ends adopts two overlapping β-turns of Types II and I′. © 1996 John Wiley & Sons, Inc.     

Bioactive peptides: Solid state,solution and molecular dynamics studies of a cyclolinopeptide A-related cystinyl cyclopentapeptide

The conformational analysis of the disulphide cyclopeptide-related cyclolinopeptide A, has been carried out by solid state methods using x-ray diffraction techniques, in solution by nmr, CD, ir spectroscopies, and by molecular dynamics (MD) analysis. The structure of the monoclinic form, obtained from ethanol (a = 11.303(2) Å, b = 14.467(8) Å, c = 12.355(2) Å, β(°) = 109.40(1), space group P2₁, Z = 2) presents two transannular H bonds with the formation of one type VIa β-turn involving the C ? O of the urethane moiety and the Phe³ NH, and an intramolecular H bond between the C ? O of urethane group and the Phe⁴ NH. In the solid state all the peptide bonds are in the trans configuration with the exception of a cis peptide bond occurring between the Cys¹ and Pro² residues; the linkage S—S assumes right-handed chirality. The conformational study in solution by nmr spectroscopy indicates that the peptide is very flexible and that some conformer families are present at room temperature both in polar and apolar solvents. CD studies confirm that this cyclic system tends to give rise to a complex mixture of quasi-isoenergetic conformations, favored by the flexibility of the disulphide bridge and by the isomerism of the Xxx-Pro bond. MD studies carried out in vacuo and in solution shows that the structure determined by solid state represents a energy minimum. All hydrogen conds found in the crystalline state are correctly reproduced in vacuo and in solution simulations. © 1994 John Wiley & Sons, Inc.     

Crystallographic characterization of the α,γ C12 helix in hybrid peptide sequences

The solid‐state conformations of two αγ hybrid peptides Boc‐[Aib‐γ⁴(R)Ile]₄‐OMe 1 and Boc‐[Aib‐γ⁴(R)Ile]₅‐OMe 2 are described. Peptides 1 and 2 adopt C₁₂‐helical conformations in crystals. The structure of octapeptide 1 is stabilized by six intramolecular 4 → 1 hydrogen bonds, forming 12 atom C₁₂ motifs. The structure of peptide 2 reveals the formation of eight successive C₁₂ hydrogen‐bonded turns. Average backbone dihedral angles for αγ C₁₂ helices are peptide 1 , Aib; φ (°) = ?57.2 ± 0.8, ψ (°) = ?44.5 ± 4.7; γ⁴(R)Ile; φ (°) = ?127.3 ± 7.3, θ₁ (°) = 58.5 ± 12.1, θ₂ (°) = 67.6 ± 10.1, ψ (°) = ?126.2 ± 16.1; peptide 2 , Aib; φ (°) = ?58.8 ± 5.1, ψ (°) = ?40.3 ± 5.5; ψ⁴(R)Ile; φ (°) = ?123.9 ± 2.7, θ₁ (°) = 53.3 θ 4.9, θ ₂ (°) = 61.2 ± 1.6, ψ (°) = ?121.8 ± 5.1. The tendency of γ⁴‐substituted residues to adopt gauche–gauche conformations about the C^α–C^β and C^β–C^γ bonds facilitates helical folding. The αγ C₁₂ helix is a backbone expanded analog of α peptide 3₁₀ helix. The hydrogen bond parameters for α peptide 3₁₀ and α‐helices are compared with those for αγ hybrid C₁₂ helix. Copyright © 2016 European Peptide Society and John Wiley & Sons.     

Design of Peptides Using α,β-Dehydro-residues: Synthesis,Crystal Structure and Molecular Conformation of N-Boc-L-Val-ΔPhe–ΔPhe-L-Ala-OCH3

To obtain general rules of peptide design using α,β-dehydro-residues, a sequence with two consecutive ΔPhe-residues, Boc-L -Val-ΔPhe–ΔPhe- L -Ala-OCH₃, was synthesized by azlactone method in solution phase. The peptide was crystallized from its solution in an acetone/water mixture (70:30) in space group P6₁ with a=b=14.912(3) Å, c= 25.548(5) Å, V=4912.0(6) ų. The structure was determined by direct methods and refined by a full matrix least-squares procedure to an R value of 0.079 for 2891 observed [I?3σ(I)] reflections. The backbone torsion angles ?₁=?54(1)°, ψ₁= 129(1)°, ω₁=?177(1)°, ?₂ =57(1)°, ψ₂=15(1)°, ω₂ =?170(1)°, ?₃=80(1)°, ψ₃ =7(2)°, ω₃=?177(1)°, ?₄ =?108(1)° and ψ^T₄=?34 (1)° suggest that the peptide adopts a folded conformation with two overlapping β-turns of types II and III′. These turns are stabilized by two intramolecular hydrogen bonds between the CO of the Boc group and the NH of ΔPhe³ and the CO of Val¹ and the NH of Ala⁴. The torsion angles of ΔPhe² and ΔPhe³ side chains are similar and indicate that the two ΔPhe residues are essentially planar. The folded molecules form head-to- tail intermolecular hydrogen bonds giving rise to continuous helical columns which run parallel to the c-axis. This structure established the formation of two β-turns of types II and III′ respectively for sequences containing two consecutive ΔPhe residues at (i+2) and (i+3) positions with a branched β-carbon residue at one end of the tetrapeptide.     

A critical evaluation of models for complex molecular dynamics: application of NMR studies of double- and single-stranded DNA

The nature of internal and overall motions in native (double-stranded) and denatured (single-stranded) DNA fragments 120–160 base pairs (bp) long is examined by molecular-dynamics modeling using ¹³C-nmr spin-relaxation data obtained over the frequency range of 37–125 MHz. The broad range of ¹³C frequencies is required to differentiate among various models. Relatively narrow linewidths, large nuclear Overhauser enhancements (NOEs), and short T₁ values all vary significantly with frequency and indicate the presence of rapid, restricted internal motions on the nanosecond time scale. For double-stranded DNA monomer fragments (147 bp, 24 Å diam at 32°C), the overall motion is that of an axially symmetric cylinder (τ_x = ～10^?6 s;τ_Z = ～1.8 × 10^?8s), which is in good agreement with values calculated from hydrodynamic theory (τ_x = ～1.8 × 10^?6 s; τ_Z = ～2.7 × 10^?8 s). The DNA internal motion can be modeled as restricted amplitude internal diffusion of individual C? H vectors of deoxyribose methine carbons C1′, C3′, and C4′, either with conic boundary conditions (τ_w = ～4 × 10^?9 s, θ_cone = ～21°) or as a bistable jump (τ_A = τ_B = ～2 × 10^?9 s, θ = ～15°). We discuss the critical role in molecular-dynamics modeling played by the angle (β) that individual C? H vectors make with the long axis of the DNA helix. Heat denaturation brings about increases in both the rate and amplitude of the internal motion (described by the wobble model with τ_W = ～0.2 × 10^?9 s, θ_cone = ～50°), and overall motion is affected by becoming essentially isotropic (τ_x = τ_Z = ～5 × 10^?8 s) for the single-stranded molecules. Since ¹³C-nmr data obtained at various DNA concentrations for C2′ of the deoxyribose ring is not described well by the above models, a new model incorporating an additional internal motion is proposed to take into account the rapid, extensive, and weakly coupled motion of C2′.     

Synthesis and crystal structure of (pipzH2)2Mo2Cl8·4H2O (pipz = piperazine)

The title compound (pipzH₂)₂Mo₂Cl₈·4H₂O (pipz = piperazine),was isolated from the solution of (morphH)₂Mo₂Cl₆(H₂O)₂ in HCl 1:1 by addition of (pipzH₂)Cl₂. This reaction indicates the reversibility of the substitution of chloride ions in Mo₂Cl₈^4? by water molecules. (pipzH₂)₂Mo₂Cl₈·4H₂O crystallizes in the Pbca space group, with a = 15.154(2), b = 13.170(2), c = 12.208(2) Å and Z = 4. The structure was solved by the Patterson method and refined to the unweighted and weighted residuals of 0.050 and 0.048. The crystal structure is built form Mo₂Cl₈^4?, (pipzH₂)²⁺ and H₂O. The MoMo distance of 2.129(3) Å is the shortest one found in all structurally-characterised Mo₂X₈^4? (X = Cl, Br) anions. Four independent MoCl distances are 2.456(3), 2.445(3), 2.463(4) and 2.455(4) Å. The (pipzH₂²⁺ exists in a usual chair conformation. There is a network of hydrogen bonds of the type NH?Cl, NH?O, OH?Cl and OH?O between the ions and water molecules.     

Synthesis,and crystal and molecular structure of the 310-helical α,β-dehydro pentapeptide Boc-Leu-Phe-Ala-ΔPhe-Leu-Ome

α,β-Dehydro amino acid residues are known to constrain the peptide backbone to the β-bend conformation. A pentapeptide containing only one α,β dehydrophenylalanine (ΔPhe) residue has been synthesized and crystallized, and its solid state conformation has been determined. The pentapeptide Boc-Leu-Phe-Ala-ΔPhe-Leu-OMe (C₃₉H₅₅N₅O₈, M_w = 721.9) was crystallized from aqueous methanol. Monoclinic space group was P2₁, a = 10.290(2)°, b = 17.149(2)°, c = 12.179(2) Å, β = 96.64(1)° with two molecules in the unit cell. The x-ray (Mo K_α, λ = 0.7107A) intensity data were collected using a CAD4 diffractometer. The crystal structure was determined by direct methods and refined using least-squares technique. R = 4.4% and R_w = 5.4% for 4403 reflections having |F₀| ≥ 3σ(|F₀|). All the peptide links are trans and the pentapeptide molecule assumes 3₁₀-helical conformation. The mean ?,ψ values, averaged over the first four residues, are ?64.4°, ?22.4° respectively. There are three 4 → 1 intramolecular hydrogen bonds, characteristic of 3₁₀,-helix. In the crystal, the peptide helices interact through two head-to-tail. N? H? O intermolecular hydrogen bonds. The peptide molecules related by 2₁, screw symmetry form a skewed assembly of helices. © 1995 John Wiley & Sons, Inc.     

Structural versatility of peptides from Cα, α-disubstituted glycines: Crystal-state conformational analysis of homopeptides from Cα-methyl,Cα-benzylglycine [(αMe)Phe]n

The molecular and crystal structures of one derivative and three homopeptides (from the di-to the tetrapeptide level) of the chiral, C^{α, α}-disubstituted glycine C^α-methyl, C^α-benzylglycine [(αMe)Phe], have been determined by x-ray diffraction. The derivative is mClAc-D -(αMe)Phe-OH, and the peptides are pBrBz-[D -(αMe)Phe]₂-NHMe, pBrBz-[D -(αMe)Phe]₃-OH hemihydrate, and pBrBz-[D -(αMe)Phe]₄-OtBu sesquihydrate. All (αMe)Phe residues prefer ?,ψ torsion angles in the helical region of the conformational map. The dipeptide methylamide and the tripeptide carboxylic acid adopt a β-turn conformation with a 1 ← 4 C?O…?H? N intramolecular H bond. The structure of the tripeptide carboxylic acid is further stabilized by a 1 ← 4 C?O…?H? O intramolecular H bond, forming an “oxy-analogue” of a β-turn. The tetrapeptide ester is folded in a regular (incipient) 3₁₀-helix. In general, the relationship between (αMe)Phe chirality and helix screw sense is opposite to that exhibited by protein amino acids. A comparison is made with the conclusions extracted from published work on homopeptides from other C^α-methylated α-amino acids. © 1993 John Wiley & Sons, Inc.     

Chain length dependent transition of 310- to α-helix of Boc-(Ala-Aib)n-OMe

An apolar synthetic octapeptide, Boc-(Ala-Aib)₄-OMe, was crystallized in the triclinic space group P1 with cell dimensions a = 11.558 Å, b = 11.643 Å, c = 9.650 Å, α = 120.220°, β = 107.000°, γ = 90.430°, V = 1055.889 ų, Z = 1, C₃₄H₆₀O₁₁N₈·H₂O. The calculated crystal density was 1.217 g/cm³ and the absorption coefficient ? was 6.1. All the intrahelical hydrogen bonds are of the 3₁₀ type, but the torsion angles, ? and ψ, of Ala(5) and Ala(7) deviate from the standard values. The distortion of the 3₁₀-helix at the C-terminal half is due to accommodation of the bulky Boc group of an adjacent peptide in the nacking. A water molecule is held between the N-terminal of one peptide and the C-terminal of the other. The oxygen atom of water forms hydrogen bonds with N (1) -H and N (2) -H, which are not involved in the intrahelical hydrogen bonds. The hydrogen atoms of water also formed hydrogen bonds with carbonyl oxygens of the adjacent peptide molecule. On the other hand, ¹H-nmr analysis revealed that the octapeptide took an α-helical structure in a CD₃CN solution. The longer peptides, Boc-(Ala-Aib)₆-OMe and Boc-(Ala-Aib)₈-OMe, were also shown to take an α-helical structure in a CD₃CN solution. An α-helical conformation of the hexadecapeptide in the solid state was suggested by x-ray analysis of the crystalline structure. Thus, the critical length for transition from the 3₁₀- to α-helix of Boc-(Ala-Aib)_n-OMe is 8. © 1993 John Wiley & Sons, Inc.     

Observation of a sterically unfavorable side-chain conformation in a leucyl residue: Crystal and molecular structure of L-leucyl–L-leucine · DMSO solvate

The crystal structure of a dipeptide L -leucyl–L -leucine (C₁₂H₂₄N₂O₃) has been determined. The crystals are monoclinic, space group P2₁, with a = 5.434(4) Å, b = 15.712(7) Å, c = 11.275(2) Å, β = 100.41(1)°, and Z = 2. The crystals contain one molecule of dimethyl sulfoxide (DMSO) as solvent of crystallization for each dipeptide molecule. The structure has been solved by direct methods and refined to a final R index of 0.059 for 920 reflections (sinθ/λ ? 0.60 Å^?1) with I ? 2σ (I). The trans peptide unit shows substantial degree of non-planarity (Δω = 14°). The peptide backbone adopts an extended conformation with torsion angles of ψ₁ = 138(1)°, ω₁ = 166(1)°, ?₂ = ? 149.3(7)°, ψ₂₁ = 164.2(7)°, and ψ₂₂ = ? 15(1)°. For the first leucyl residue, the side-chain conformation is specified by the torsion angles ¹χ₁ = 176.7(7)°, ¹χ₂₁ = 62(1)°, ¹χ₂₂ = ? 177.4(8)°; the second leucyl residue adopts a Sterically unfavorable conformation with ²χ₁ = 61(1)°, ²χ₂₁ = 97(1)°, and ²χ₂₂ = ?151(1)°. The packing involves head-to-tail interaction of peptide molecules and segregation of polar and nonpolar regions. The DMSO molecule is strongly hydrogen bonded to the terminal NH group. © 1994 John Wiley & Sons, Inc.     

Adrenocorticotropin/α-Melanocyte-Stimulating Hormone (ACTH/MSH)-Like Peptides Modulate Adenylate Cyclase Activity in Rat Brain Slices: Evidence for an ACTH/MSH Receptor-Coupled Mechanism

Abstract: The regulation of adenylate cyclase activity by adrenocorticotropin/α-melanocyte–stimulating hormone (ACTH/MSH)-like peptides was investigated in rat brain slices using a superfusion method. Adenylate cyclase activity was concentration-dependently increased by ACTH-(1–24), α-MSH (EC₅₀ values 16 and 6 nM, respectively), and [Nle⁴,D-Phe⁷]α-MSH (EC₅₀ value 1.6 nM), in the presence of forskolin (1 μM, optimal concentration). 1-9-Dideoxy-forskolin did not augment the response of adenylate cyclase to ACTH-(1–24). Various peptide fragments were tested for their ability to enhance [³H]cyclic AMP production. [Nle⁴,D-Phe⁷]α-MSH increased [³H]cyclic AMP formation with a maximal effect of 30% and was more potent than ACTH-(1–24), ACTH-(1–16)-NH₂, α-MSH, ACTH-(1–13)-NH₂, [MetO⁴]α-MSH, [MetO₂⁴,D-Lys⁸,Phe⁹]ACTH-(4–9), ACTH-(7–16)-NH₂, ACTH-(1–10), and ACTH-(11–24), in order of potency. This structure–activity relationship resembles that found for the previously described peptide-induced display of excessive grooming. ACTH-(1–24) stimulated adenylate cyclase activity in both striatal (maximal effect, ?20%) and septal slices (maximal effect, ?40%), but not in hippocampal or cortical slices. Lesioning of the dopaminergic projections to the striatum did not result in a diminished effect of [Nle⁴,D-Phe⁷]α-MSH on [³H]cyclic AMP accumulation, which indicates that the ACTH/MSH receptor–stimulated adenylate cyclase is not located on striatal dopaminergic terminals. ACTH-(1–24) did not affect the dopamine D₁ or D₂ receptor–mediated modulation of adenylate cyclase activity. Based on the present data, we suggest that the binding of endogenous ACTH or α-MSH to a putative ACTH/MSH receptor in certain brain regions leads to the activation of a signal transduction pathway using cyclic AMP as a second messenger.     

The crystallochemistry of tetracyanocomplexes. The crystal and molecular structures of tris(1,2-diaminoethane)zinc(II) tetracyanoniccolate(II) monohydrate and tris(1,2-diaminoethane)zinc(II) tetracyanoniccolate(II)

C₁₀H₂₆N₁₀ONiZn, tris(1,2-diaminoethane) zinc(II) tetrakis(cyano)niccolate(II) monohydrate (I), orthorhombic, Pbca, a = 1.1680(4), b = 1.5844(3), c = 1.9981(6) nm, Z = 8 d(meas) = 1.54, d(calc) = 1.53 g cm^?3. C₁₀H₂₄N₁₀NiZn, tris(1,2-diaminoethane) zinc(II) terakis(cyano)niccolate(II), (II), monoclinic, P2₁/n, a = 0.7957(2), b = 1.5170(5), c = 1.4932(4) nm, β = 96.41(2)°, Z = 4, d(meas) = 1.49, d(calc) = 1.51 g cm^?3. Both the structures (I) and (II) have been solved by the heavy atom method and refined by full-matrix least-squares to R(I) = 0.086 for 1890 independent reflections and R(II) = 0.058 for 1689 independent reflections, respectively. In the case of (II) the superlattice structure problem was solved. The crystal structure of (I) consists of [Zn(en)₃]²⁺ cations, [Ni(CN)₄]^2? anions and water molecules. Two of the cyano groups in trans positions are bonded to water molecules by hydrogen bonds, the distances CN?O being 0.289 and 0.291 nm, respectively. The crystal structure of (II) is constituted by [Zn(en)₃]²⁺ cations and [Ni(CN)₄]^2? anions.     

Urinary C‐Peptide Excretion: A Novel Alternate Measure of Insulin Sensitivity in Physiological Conditions

Insulin sensitivity (IS) is measured by the euglycemic–hyperinsulinemic clamp under a nonphysiological condition. Daily C‐peptide urinary excretion may be a physiological index of IS, because C‐peptide is co‐secreted with insulin as a function of nutrient intake and IS. The amount of ²H₂O released from glycolytic glucose metabolism after [6,6‐²H₂]‐glucose ingestion was recently proposed as a physiological measure of IS. We compared these IS surrogates to the gold standard (euglycemic–hyperinsulinemic clamp). Thirty (15 male/15 female) sedentary, nondiabetic participants (27.2 ± 4.0 (s.d.) kg/m², 35 ± 12 years) were admitted for 3 days to our in‐patient unit. After a 10‐h fast, they received 60 g of glucose and 15 g of [6,6‐²H₂]‐glucose. Before glucose ingestion and hourly thereafter for 4 h, plasma glucose and insulin concentrations, and plasma deuterium enrichment were determined. Plasma ²H₂O production divided by insulin response was used as the glycolytic index. On day 2, subjects spent 23 h in a metabolic chamber (eucaloric diet, 50% carbohydrate, 30% fat). Urinary C‐peptide excretion was divided by energy intake yielding the C‐peptide to energy intake ratio (CPEP/EI). After leaving the chamber (day 3, 10‐h fast), IS was measured by a 2‐h clamp (120 mU/m²/min). Average IS (clamp) was 7.3 ± 2.6 mg glucose/kg estimated metabolic body size/min (range: 3.6–13.2). These values were inversely correlated with CPEP/EI (r = ?0.62; P < 0.01) and positively with the glycolytic rate (r = 0.60; P < 0.01). In nondiabetic subjects, two novel estimates of IS—daily urinary C‐peptide urinary excretion and glycolytic rate during an oral glucose tolerance test —were related to IS by a clamp.     

Bioactive peptides: Conformational studies of [TYR4] cyclolinopeptide A

The solid state conformational analysis of [Tyr⁴] cyclolinopeptide A has been carried out by x-ray diffraction studies. The crystal structure of the monoclinic form, grown from a dioxane-water mixture [a = 9.849 (5) Å, b = 20.752 (4) Å, c = 16.728 (5) Å, β = 98.83 (3)°, space group P2₁, Z = 2], shows the presence of five intramolecular N-H? O?C hydrogen bonds, with formation of one C₁₇ ring structure, one α-turn (C₁₃), one inverse γ-turn (C₇), and two β-turns (C₁₀, one of type III and one of type 1). The Pro¹-Pro² peptide unit is cis (ω = 5°) all others are trans. The structure is almost superimposable with that of cyclolinopeptide A. The rms deviation for the atoms of the backbones is on the average 0.33 Å. © 1995 John Wiley & Sons, Inc.     

Accommodation of a D-Phe residue into a right-handed 310-helix: Structure of Boc-D-Phe-(Aib)4-Gly-L-Leu-(Aib)2-Ome,an analogue of the amino terminal segment of antiamoebins and emerimicins

The crystal structure of the nonapeptide Boc-D -Phe-Aib-Aib-Aib-Aib-Gly-Leu-Aib-AibOMe (I), which is an analogue of the N-terminal sequence of antiamoebins and emerimicins, establishes a completely 3₁₀-helical conformation with seven successive intramolecular 4 → 1 hydrogen bonds. The average, ?, ψ values for residues 1–8 are ?59° and ?32°, respectively. Crystal parameters are C₄₇H₇₇N₉O₁₂, space group P1, a = 10.636(4) Å, b = 11.239(4) Å, c = 12.227(6) Å, α = 101.17(4)°, β = 97.22(4)°, γ = 89.80(3)°, Z = 1, R = 5.95% for 3018 data with |F₀| > 3α(F), resolution 0.93 Å. The use of the torsion angle κ = C(i ? 1)N(i)C^α(i)C^β(i), where κ = 68° for D -Phe and κ = 164° for L -Leu, confirms the opposite configurations of these residues. The ?, ψ values of ?62° and ?32° at D -Phe are unusual, since this region is characteristic of residues with L configurations. Peptide I possesses only two chiral residues of opposing configuration. The observed right-handed 3₁₀-helical structure suggests that helix sense has probably been determined by the stereo-chemical preferences of the Leu residue. © 1993 John Wiley & Sons, Inc.     

High-resolution solid-state 13C-NMR of peptides: a study of chain-length dependence for 3(10)-helix formation

High-resolution solid-state ¹³C-nmr spectra of two series of fully protected oligopeptides, Z-(Aib)_n-OMe (n = 3?8) and Z-(Aib)_n-L-Leu-(Aib)₂-OMe (n = 0?5), were recorded to gain insight into main-chain length dependence for 3₁₀-helix formation. We found that all the oligopeptides examined adopt an incipient or a fully developed 3₁₀-helical structure, as judged from the characteristic splitting of the C_β signals as well as the conformation-dependent displacements of the C_α and C?O peaks.     

X-Pro peptides: Solution and solid-state conformation of benzyloxycarbonyl-(Aib-Pro)2methyl ester,a type I β-turn

The synthesis of the tetrapeptide benzyloxycarbonyl(α-aminoisobutyryl-L -prolyl)₂-methyl ester (Z-(Aib-Pro)₂-OMe) and an analysis of its conformation in solution and the solid state are reported. Stepwise synthesis using dicyclohexylcarbodiimide leads to racemization at Pro(2). Evidence for the presence of diastereomeric tetrapeptides is obtained from 270-MHz¹H-nmr and 67.89-MHz ¹³C-nmr. The all-L tetrapeptide is obtained by fractional crystallization from ethyl acetate. The NH of Aib(3) is shown to be involved in an intramo-lecular hydrogen bond by variable-temperature ¹H-nmr and the solvent dependence of NH chemical shifts. The results are consistent with a β-turn conformation with Aib(1) and Pro(2) at the corners stabilized by a 4 → 1 hydrogen bond. The molecule crystallizes in the space group P2₁2₁2₁, with a = 8.839, b = 14.938, and c = 22.015 Å. The structure has been refined to an R value of 0.051. The peptide backbone is all-trans, and a 4 → 1 hydrogen bond, between the CO group of the urethane moiety and Aib(3) NH, is observed. Aib(1) and Pro(2) occupy the corner positions of a type I β-turn with ? = ?55.4°, Ψ = ?31.3° for Aib(1) and ? = ?71.6°, Ψ = ?38° for Pro(2). The tertiary amide unit linking Pro(2) and Aib(3) is significantly distorted from planarity (Δω = 14.3°).     

Crystal Structure and Molecular Conformation of 4-Thiouracil-2′-Trifluorothioacetamide -3′, 5′-Diacetyl-β-D-Riboside

Abstract

4-thiouracil-2′-trifluorothioacetamide-3′, 5′-diacetyl-β-D-riboside is one of the modified thiouracil analogs synthesized in our institute. The determination of the crystal and molecular structure of this compound was carried out with a view to study the conformation of the molecule in the solid state as well as to investigate the conformations of the trifluoroacetamide and the acetyl substituents of the ribose and their effects on the conformation of the ribose ring. Crystals of 4-thiouracil-2′-trifluorothioacetamide-3′,5′- diacetyl-β-D-riboside are orthorhombic, space group P2₁ 2₁ 2₁, with cell dimensions a= 15.351 (2), b= 15.535 (1), c= 8.307 (1) Å, V=1981.0 (7) ų, Z=4, D_m= 1.53, D_c=1.527 g/c.c. and μ=30.1cm -¹. The structure was determined using CuKα (λ, =1.5418 Å) at a temperature T of 297K, with 2333 reflections, which were collected on a Enraf-Nonius CAD-4 diffactometer, out of which 2249 (I ≥20) were considered observed. The structure was determined by direct methods using MULTAN and refined by full matrix least squares method to a final reliability factor of 0.054 and a weighted R factor of 0.079. The nucleoside is in the anti conformation [X_CN =51.4 (5)°], the ribose has the unusual C (2′) endo -C (1′) exo (²T₁), and a g+ conformation [ψ=47.5 (4)] across C(4′)-C(5′) bond. The pseudorotation angle P is 152.8 (4) ° and the amplitude of pucker τ_m of 42.7 (3)°. The average C-F bond distance is 1.308 Å. There is no base pairing and the typical base-base hydrogen bonded interactions are not present in this structure. On the other hand, a hydrogen bonded dimer is formed involving C(3′) - H(3′)… O (2) and N(3) -H (N3) … O (Al) hydrogen bonds joining the base, ribose ring and the acetyl group. The trend towards longer exocyclic bonds at the acetyl centers in compounds with strongly electronegative aglycones, is also exhibited in this compound, with C(3′)-O(3′) and C(5′)-0(5′) being much longer than C(1′)-O(4′). The acetyl groups also take part in C-H…O hydrogen bonding with the acetyl oxygen atom OA2.