Expression of α-amylase gene from Bacillus stearothermophilus in Iactobacillus sanfrancisco

Summary pC 194Amy, a construct containing an amylase encoding gene, was introduced in Lactobacillus sanfrancisco CB1 by electroporation and the Amy gene was expressed. Amylase activity was extracellular and retained after 140 generations. The growth of the transformant with 10 g starch/L and 5 g maltose/L was similar to that of the wild type in 10 g maltose/L. L. sanfrancisco CB1 transformant harboured pC 194Amy, a small DNA fragment and did not possess the native plasmid. The small DNA fragment was demonstrated to be a deletion product of pC194Amy containing the Amy sequence. L. sanfrancisco CB1 was also transformed with pGKV210, pNZ12 and pMG36e by electroporation.     

The production of α-amylase in batch and chemostat culture by Bacillus stearothermophilus

The production of -amylase (-1,4-glucan 4-glucanohydrolase; EC. 3.2.1.1) by a strain of Bacillus stearothermophilus isolated from leaf litter was investigated in a tryptone-maltose medium at 55°C in batch and chemostat culture. Amylase production was growth-limited and restricted to the exponential phase in batch culture. The enzyme yield was reduced by 40% when the culture pH was maintained at pH 7.2. Amylase production in chemostat culture was influenced by the growth rate throughout the dilution rate range used.     

Site-directed mutagenesis of the calcium-binding site of α-amylase of <Emphasis Type="Italic">Bacillus licheniformis</Emphasis>

Amylases that are active under acidic conditions (pH <6), at higher temperatures (>70 degrees C) and have less reliance on Ca(2+) are required for starch hydrolysis. The alpha-amylase gene of Bacillus licheniformis MTCC 6598 was cloned and expressed in Escherichia coli BL21. The calcium-binding site spanning amino acid residues from 104 to 200 in the loop regions of domain B and D430 in domain C of amylase were changed by site-directed mutagenesis and the resultant mutant amylases were analyzed. Calcium-binding residues, N104, D161, D183, D200 and D430, were replaced with D104 and N161, N183, N200 and N430, respectively. Mutant amylase with N104D had a slightly decreased activity at 30 degrees C but a significantly improved specific activity at pH 5 and 70 degrees C, which is desirable character for a food enzyme. The amylase mutants with D183N or D200N lost all activity while the mutant amylase with D161N retained its activity at 30 degrees C but had significantly less activity at 70 degrees C. On the other hand, the activity of the mutant amylase with D430N was not changed at 30 degrees C but had an improved activity at 70 degrees C.     

Site-directed mutagenesis and expression inEscherichia coli of WMAI-1, a wheat monomeric inhibitor of insect α-amylase

The wheat monomeric inhibitor WMAI-1 (syn. 0.28) produced inEscherichia coli using the pT7-7 expression ventor has the correct N-terminal sequence and the same electrophoretic mobility and specific activity towards the -amylase from the insectTenebrio molitor as the native WMAI-1 isolated from wheat. This confirms that the native inhibitor is not glycosylated and contradicts claims that a putative glycosyl moiety was essential for inhibition. Thirteen mutants have been obtained at six different sites. Substitution of the highly conserved N-terminal S by the sequence ARIRAR increased the pre-incubation time required for maximum activity. A similar result was obtained by insertion of GPRLPW after position 4, while insertion of EPRAPW at the same position rendered the inhibitor inactive. The substitution D/EGPRL and insertions DGP or D, at position 58, produced complete inactivation. All other mutations had only minor effects on activity.     

Thermostable mutant variants of Bacillus sp. 406 α-amylase generated by site-directed mutagenesis

Several mutations are known to increase the thermostability of α-amylase of B. licheniformis and other α-amylases. Site-directed mutagenesis was used to introduce similar mutations into the sequence of the α-amylase gene from mesophilic Bacillus sp. 406. The influence of the mutations on thermostability of the enzyme was studied. It was shown that the Gly211Val and Asn192Phe substitutions increased the half-inactivation temperature (T_m) of the enzyme from 51.94±0.45 to 55.51±0.59 and 58.84±0.68°C respectively, in comparison to the wild-type enzyme. The deletion of Arg178-Gly179 (dRG) resulted in an increase of T_m of the α-amylase to 71.7±1.73°C. The stabilising effect of mutations was additive. When combined they increase the T_m of the wild-type amylase by more than 26°C. Thermostability rates of the triple mutant are close to the values which are typical for industrial heat-stable α-amylases, and its ability to degrade starch at 75°C was considerably increased. The present research confirmed that the Gly211Val, Asn192Phe and dRG mutations could play a significant role in thermostabilization of both mesophilic and thermophilic α-amylases.     

Purification and characterization of a thermostable α-amylase fromBacillus stearothermophilus

A soil isolate of Bacillus stearothermophilus was found to synthesize thermostable alpha-amylase. The enzyme was purified to homogeneity by ammonium sulfate fractionation and IECC on DEAE-cellulose column. The purified enzyme was considered to be a monomeric protein with a molar mass of 64 kDa, as determined by SDS-PAGE. The enzyme showed a wide range of pH tolerance and maximum activity at pH 7.0. The temperature tolerance was up to 100 degrees C with more than 90% catalytic activity; the maximum activity was observed at 50 degrees C. Divalent metal ions exhibited inhibitory effect on the enzyme activity. However, proteinase inhibitor did not react positively.     

Effect of additives on the thermostability ofBacillus stearothermophilus α-amylase

The effect of additives on the thermostability ofBacillus stearothermophilus -amylase was determined. Polyols, dimethyl formamide, and dimethyl sulfoxide all increased the half life of the enzyme approximately 2-fold when tested at a 10% (w/v) addition. These results suggest that the enzyme's structure is stabilized against thermal denaturation through ionic interactions. Addition of dextran or polyvinyl alcohol (hydrophilic polymers which increase the viscosity of the solution) had a slight positive effect on enzyme stability while addition of polyethylene glycol or polyvinylpyrrolidone (hydrophobic polymers which increase the viscosity of the solution) resulted in a 2-fold decrease in enzyme half life.     

Purification of α-amylase from Bacillus lentus cultures

Acetone fractionation of Bacillus lentus culture filtrate yielded the highest -amylase activity and the 66.6% fraction reached 13-fold that of the crude enzyme preparation. Gel filtration and ion exchange chromatography afforded a pure -amylase (relative molecular mass, 42 000). The pure enzyme was highly active on starch and dextrin. It produced a mixture of oligosaccharides as major products of starch hydrolysis. Maximal activity was reached at 70° C and pH 6.1. Ca²⁺, Na⁺, K⁺ and Sr²⁺ ions stabilized or slightly stimulated the enzyme whereas Ag⁺, Co²⁺, Hg²⁺, Zn²⁺, Cd²⁺ and Fe³⁺ ions strongly inhibited the activity. The enzyme contained 16 amino acids, of which aspartic and glutamic acids were present in the highest proportions. Correspondence to: S. H. Omar     

Enhancement of α-amylase production by integrating and amplifying the α-amylase gene of Bacillus amyloliquefaciens in the genome of Bacillus subtilis

Summary The -amylase gene of Bacillus amyloliquefaciens was integrated into the genome of Bacillus subtilis by homologous recombination. In the first transformation step, several strains were obtained carrying the -amylase gene as two randomly located copies. These strains produced -amylase in the quantities comparable with that of the multicopy plasmid pKTH10, carrying the same -amylase gene. With the plasmid system, however, the rate of the -amylase synthesis was faster and the production phase shorter than those of the chromosomally encoded -amylase. The two chromosomal gene copies were further multiplied either by amplification using increasing antibiotic concentration as the selective pressure or by performing a second transformation step, identical to the first integration procedure. Both methods resulted in integration strains carrying up to eight -amylase gene copies per one genome and producing up to eightfold higher -amylase activity than the parental strains. Six out of seven transformants, studied in more detail, were stable after growth of 42 h even without antibiotic selection. The number of the DNA and mRNA copies of the -amylase gene was quantitavely determined by sandwich hybridization techniques, directly from culture medium.     

Industrial production of α-amylase by genetically engineered Bacillus

A genetically engineered Bacillus subtilis strain (ALKO 84) has been introduced for industrial production of α-amylase. This strain carries the α-amylase gene from a traditionally developed production strain B. amyloliquefaciens (ALKO 89) on the multicopy plasmid pUB110.⁸At laboratory scale the recombinant strain ALKO 84 produced in industrial medium about twice as much α-amylase as the traditional strain ALKO 89. The process for production of the enzyme was scaled-up to 60m³. At this scale B. subtilis ALKO 84 retained its relative superiority to B. amyloliquefaciens ALKO 89, producing about 85% of the activity obtained at laboratory scale. Stability of the recombinant plasmid was found acceptable during the large-scale cultivations with over 90% of cells retaining plasmid-encoded characteristics throughout.     

Physiology of α-amylase production by immobilized Bacillus amyloliquefaciens

Summary Bacillus amyloliquefaciens 321S cells were immobilized with 3.4% -carrageenan gel in bead form, and -amylase production by the immobilized cells was studied. Cells in the gel, after the population reached maximum were restricted to a layer of 50 m thickness, from the surface of the gel, suggesting that oxygen diffusion is the growth limiting factor. The specific respiratory activity and the growth rate of the entrapped cells under such conditions were 1/2 and 1/5 1/10, respectively, that of free cells. In spite of the repressed respiration and growth, the specific rate of -amylase production of the entrapped cells reached the maximum value of free cells or higher.In continuous culture, in an aerated vessel with a volume ratio of gel beads to medium of 1:2, the maximum production rate of -amylase was obtained at a dilution rate of 1.0 h^–1, which was double the maximum specific growth rate of the strain.These results showed that bacterial -amylase production, which is a nongrowth-associated type of synthesis was achieved with the use of immobilized cells.     

Hyper expression ofBacillus stearothermophilus α-amylase gene inBacillus subtilis

Summary Utilizing plasmids pUB110, pBR322 and pRG71, we have constructed a number of vectors which could be utilized for expression of cloned genes both in gram positive and gram negative bacteria. This report discusses the hyperexpression of -amylase gene ofB. stearothermophilus BR135 using these vectors.     

High level extracellular secretion of thermostable α-amylase ofBacillus stearothermophilus inEscherichia coli

Summary Bacillus stearothermophilus BR135 (ATCC 29609)amy gene was cloned in pBR322 from its plasmid DNA and was subcloned in a vector useful both forB. subtilis andE. coli.E.coli HB101 harboring the plasmid pSS099 when grown in L medium in presence of 5. g/ml chloramphenicol produces 70 units/ml of extracellular -amylase. This is nearly twice that ofE.coli cells harboring pSSO76, a plasmid havingamy ofB.stearothermophilus BR135 atHindIII site of pBR322. Characteristically the protein was a 58 kd protein and cross reacted with antiserum developed against purified -amylase of BR135.     

A reduced stabilityBacillus stearothermophilus α-amylase for food applications

Acylation ofBacillus stearothermophilus -amylase was investigated for the purpose of producing a reduced stability, malt-like -amylase. Acylation with acetic, propionic, or butyric anhydrides resulted in formation of derivatives with substantially reduced thermal stability. Acylation with other anhydrides was not as effective in reducing the thermostability of the enzyme. Measurement of the Brabender viscosity of unmalted flour supplemented with acetylatedBacillus stearothermophilus -amylase indicated that the acetylated enzyme yielded viscosity reductions similar to those seen with flour that had been supplemented with malt.     

Denaturation ofBacillus stearothermophilus α-amylase by urea and detergents

Denaturation ofBacillus stearothermophilus -amylase by urea and detergents was investigated for the purpose of understanding the mechanism of denaturation of this enzyme. The enzyme was extremely resistant to denaturation by detergents at 60° C, either in the presence or absence of added calcium. Addition of EDTA was necessary to obtain denaturation by detergents. The rate of denaturation of the -amylase by urea was strongly dependent on the incubation pH and presence or absence of calcium ions. Calcium-binding groups were shown to have pKa values of 5.5 for exogenous calcium and 4.7 to 4.8 for endogenous calcium. A mechanism is proposed for the denaturation ofBacillus stearothermophilus -amylase.     

Gene Cloning and Characterization of α-Glucuronidase of Bacillus stearothermophilus No. 236

The α-glucuronidase gene of Bacillus stearothermophilus No. 236 was cloned, sequenced, and expressed in Escherichia coli. The gene, designated aguA, encoded a 691-residue polypeptide with calculated molecular weight of 78,156 and pI of 5.34. The α-glucuronidase produced by a recombinant E. coli strain containing the aguA gene was purified to apparent homogeneity and characterized. The molecular weight of the α-glucuronidase was 77,000 by SDS-PAGE and 161,000 by gel filtration; the functional form of the α-glucuronidase therefore was dimeric. The optimal pH and temperature for the enzyme activity were pH 6.5 and 40°C, respectively. The enzyme's half-life at 50°C was 50 min. The values for the kinetic parameters of K_m and V_max were 0.78 mM and 15.3 U/mg for aldotriouronic acid [2-O-α- (4-O-methyl-α-D-glucopyranosyluronic)-D-xylobiose]. The α-glucuronidase acted mainly on small substituted xylo-oligomers and did not release methylglucuronic acid from intact xylan. Nevertheless, synergism in the release of xylose from xylan was found when α-glucuronidase was added to a mixture of endoxylanase and β-xylosidase.     

Characterization and delignification activity of a thermostable α-l-arabinofuranosidase from Bacillus stearothermophilus

Bacillus stearothermophilus L1 was isolated by enrichment culture using an alkaline extract of pulp as the carbon source at 65°C and pH 9.0. The bacterium produced extracellular xylanase and -l-arabinofuranosidase (EC 3.2.1.55). The xylanase activity was high when the cells were grown in the presence of d-xylose, whereas the arabinofuranosidase activity was high when grown in media containing l-arabinose. The arabinofuranosidase was purified 59-fold with an 80% yield by DEAE Sephacel and Sephadex G-100 chromatography. The purified enzyme had an apparent molecular mass of 110 000 kDa and consisted of two subunits of 52 500 kDa and 57 500 kDa. Using p-nitrophenyl--l-arabinofuranosidase as the substrate, the enzyme had a Michaelis constant (K _m) of 2.2 × 10^–4 m, maximum reaction velocity (V_max) of 11o mol min^–1 mg^–1, temperature optimum of 70°C and pH optimum of 7.0 (50% activity at pH 8.0). The enzyme was specific for the furanoside configuration. The purified enzyme partially delignified softwood Kraft pulp. Treatment of the pulp with 38 units ml^–1 of -l-arabinofuranosidase at 65°C for 2 h at pH 8.0 and 9.0 led to lignin releases of 2.3% and 2.1%, respectively. The enzyme acted synergistically with a thermophilic xylanase in the delignification process, yielding a 19.2% release of lignin. Correspondence to: Eugene Rosenberg     

Studies on the thermostability of the α-amylase of Bacillus caldovelox

Summary Molecular mechanisms of thermoinactivation of the thermostable -amylase of Bacillus caldovelox were examined. Monomolecular conformational processes were found to be the major causes of thermoinactivation at both pH 4.5 and 8.0. The enzyme possessed considerable additional thermostability at pH 8.0, with half-lives of 0.75 and 7.0 min at 90° C and pH 4.5 and 8.0, respectively. The amino acid composition was examined with respect to the underlying thermostability exhibited by this enzyme. The inherent thermostability exhibited may be due to the high proline content (4.47 mol%), but more likely due to the high content of residues forming hydrophobic bonds (60.89 mol%) allied to a low content of residues responsible for ionic interactions (28.34 mol%). Offprint requests to: C. T. Kelly     

Immobilization of Bacillus licheniformis α-amylase onto reactive polymer films

Alpha-amylase was covalently immobilized onto maleic anhydride copolymer films preserving activity. The initial activity of the immobilized layers strongly depended on the immobilization solution, and on the physicochemical properties of the copolymer film. Higher enzyme loading (quantified by amino acid analysis using HPLC) and activity (measured by following starch hydrolysis) were attainable onto hydrophilic, highly swelling 3-D poly(ethylene-alt-maleic anhydride) (PEMA) copolymer films, while immobilization onto hydrophobic poly(octadecene-alt-maleic anhydride) (POMA) copolymer films resulted in low content enzyme layers and lower activity. No significant activity was lost upon dehydration/re-hydration or storage of enzyme containing PEMA copolymer layers in deionised water for up to 48 h. In contrast, α-amylase decorated POMA films suffered a significant activity loss under those conditions. The distinct behaviours may be attributed to the different intrinsic physicochemical properties of the copolymer films. The compact, hydrophobic POMA films possibly favours hydrophobic interactions between the hydrophobic moieties of the protein and the surface, which may result in conformational changes, and consequent loss of activity. Surprisingly, residual activity was found after harsh treatments of active α-amylase PEMA based layers revealing that immobilization onto the hydrophilic polymer films improved the stability of the enzyme.     

Site-directed mutagenesis and functional analysis of maltose-binding site of β-cyclodextrin glucanotransferase from Bacillus firmus var. alkalophilus

The maltose-binding site 1 (MBS1) located in the E-domain of -cyclodextrin glucanotransferase (-CGTase) from Bacillus firmus var. alkalophilus was modified through site-directed mutagenesis, and five mutants, deleting whole MBS1 and four replacing tryptophan residue (W) 652 with the non-hydrophobic glycine (G) and the hydrophobic phenylalanine (F), tyrosine (Y), and leucine (L), respectively, were constructed. The catalytic function of mutants deleting the MBS1 and replacing with the non-hydrophobic glycine changed significantly, however, other mutants remained unchanged. The MBS1 in E-domain is closely connected with the cyclization reaction of -CGTase rather than the coupling or starch-hydrolysis reactions.