Comparison of Assimilatory Organic Nitrogen, Sulfur, and Carbon Sources for Growth of Methanobacterium Species

Experiments document the ability of two species of autotrophic methanogens to assimilate and utilize organic substrates as the nutrient sulfur or nitrogen source and as a carbon source during growth on H₂-CO₂. Methanobacterium thermoautotrophicum strain ΔH and the mesophilic species Methanobacterium sp. strain Ivanov grew with glutamine as the nitrogen source or cysteine as the sulfur source. M. thermoautotrophicum also utilized urea as the nitrogen source and as a carbon precursor for methane and cell synthesis. Methanobacterium sp. strain Ivanov grew with methionine as the sulfur source. The growth rate of two different Methanobacterium species was lower on an organic N or S source than on ammonium or sulfide. ³⁵S and ¹⁴C tracer studies demonstrated that amino acid or urea assimilation correlated with time and amount of growth. The rate of [³⁵S]cysteine incorporation was similar in strain ΔH (34 nmol h⁻¹ mg of cells⁻¹) and strain Ivanov (23 nmol h⁻¹ mg of cells⁻¹). However, the rate of [¹⁴C]acetate incorporation was dramatically different (17 versus 208 nmol h⁻¹ mg of cells⁻¹ in strains ΔH and Ivanov, respectively). [¹⁴C]acetate accounted for 1.3 and 21.2% of the total cell carbon synthesized by strains ΔH and Ivanov, respectively. Amino acids and urea were mainly assimilated into the cell protein fraction, but accounted for less than 2.0% of the total cell carbon synthesized. The data suggest that a biochemical-genetic approach to understanding cell carbon synthesis in methanogens is feasible; mutants that are auxotrophic for either acetate, glutamine, cysteine, or methionine are suggested as future targets for genetic studies.     

Statistical Analysis of Pseudomonas aeruginosa Biofilm Development: Impact of Mutations in Genes Involved in Twitching Motility, Cell-to-Cell Signaling, and Stationary-Phase Sigma Factor Expression

Four strains of Pseudomonas aeruginosa (wild type, ΔpilHIJK mutant, lasI mutant, and rpoS mutant) were genetically tagged with the green fluorescent protein, and the development of flow chamber-grown biofilms by each of them was investigated by confocal laser scanning microscopy. The structural developments of the biofilms were quantified by the computer program COMSTAT (A. Heydorn, A. T. Nielsen, M. Hentzer, C. Sternberg, M. Givskov, B. K. Ersbøll, and S. Molin, Microbiology 146:2395-2407, 2000). Two structural key variables, average thickness and roughness, formed the basis for an analysis of variance model comprising the four P. aeruginosa strains, five time points (55, 98, 146, 242, and 314 h), and three independent rounds of biofilm experiments. The results showed that the wild type, the ΔpilHIJK mutant, and the rpoS mutant display conspicuously different types of temporal biofilm development, whereas the lasI mutant was indistinguishable from the wild type at all time points. The wild type and the lasI mutant formed uniform, densely packed biofilms. The rpoS mutant formed densely packed biofilms that were significantly thicker than those of the wild type, whereas the ΔpilHIJK mutant formed distinct microcolonies that were regularly spaced and almost uniform in size. The results are discussed in relation to the current model of P. aeruginosa biofilm development.     

Specific Growth Rate Determines the Sensitivity of Escherichia coli to Thermal, UVA, and Solar Disinfection

Knowledge about the sensitivity of the test organism is essential for the evaluation of any disinfection method. In this work we show that sensitivity of Escherichia coli MG1655 to three physical stresses (mild heat, UVA light, and sunlight) that are relevant in the disinfection of drinking water with solar radiation is determined by the specific growth rate of the culture. Batch- and chemostat-cultivated cells from cultures with similar specific growth rates showed similar stress sensitivities. Generally, fast-growing cells were more sensitive to the stresses than slow-growing cells. For example, slow-growing chemostat-cultivated cells (D = 0.08 h⁻¹) and stationary-phase bacteria from batch culture that were exposed to mild heat had very similar T₉₀ (time until 90% of the population is inactivated) values (T_{90, chemostat} = 2.66 h; T_{90, batch} = 2.62 h), whereas T₉₀ for cells growing at a μ of 0.9 h⁻¹ was 0.2 h. We present evidence that the stress sensitivity of E. coli is correlated with the intracellular level of the alternative sigma factor RpoS. This is also supported by the fact that E. coli rpoS mutant cells were more stress sensitive than the parent strain by factors of 4.9 (mild heat), 5.3 (UVA light), and 4.1 (sunlight). Furthermore, modeling of inactivation curves with GInaFiT revealed that the shape of inactivation curves changed depending on the specific growth rate. Inactivation curves of cells from fast-growing cultures (μ = 1.0 h⁻¹) that were irradiated with UVA light showed a tailing effect, while for slow-growing cultures (μ = 0.3 h⁻¹), inactivation curves with shoulders were obtained. Our findings emphasize the need for accurate reporting of specific growth rates and detailed culture conditions in disinfection studies to allow comparison of data from different studies and laboratories and sound interpretation of the data obtained.     

Glycerol as a substrate for aerobic succinate production in minimal medium with Corynebacterium glutamicum

Corynebacterium glutamicum, an established microbial cell factory for the biotechnological production of amino acids, was recently genetically engineered for aerobic succinate production from glucose in minimal medium. In this work, the corresponding strains were transformed with plasmid pVWEx1-glpFKD coding for glycerol utilization genes from Escherichia coli. This plasmid had previously been shown to allow growth of C. glutamicum with glycerol as sole carbon source. The resulting strains were tested in minimal medium for aerobic succinate production from glycerol, which is a by-product in biodiesel synthesis. The best strain BL-1/pVWEx1-glpFKD formed 79 mM (9.3 g l⁻¹) succinate from 375 mM glycerol, representing 42% of the maximal theoretical yield under aerobic conditions. A specific succinate production rate of 1.55 mmol g⁻¹ (cdw) h⁻¹ and a volumetric productivity of 3.59 mM h⁻¹ were obtained, the latter value representing the highest one currently described in literature. The results demonstrate that metabolically engineered strains of C. glutamicum are well suited for aerobic succinate production from glycerol.     

Effect of Specific Growth Rate on Fermentative Capacity of Baker’s Yeast

The specific growth rate is a key control parameter in the industrial production of baker’s yeast. Nevertheless, quantitative data describing its effect on fermentative capacity are not available from the literature. In this study, the effect of the specific growth rate on the physiology and fermentative capacity of an industrial Saccharomyces cerevisiae strain in aerobic, glucose-limited chemostat cultures was investigated. At specific growth rates (dilution rates, D) below 0.28 h⁻¹, glucose metabolism was fully respiratory. Above this dilution rate, respirofermentative metabolism set in, with ethanol production rates of up to 14 mmol of ethanol · g of biomass⁻¹ · h⁻¹ at D = 0.40 h⁻¹. A substantial fermentative capacity (assayed offline as ethanol production rate under anaerobic conditions) was found in cultures in which no ethanol was detectable (D < 0.28 h⁻¹). This fermentative capacity increased with increasing dilution rates, from 10.0 mmol of ethanol · g of dry yeast biomass⁻¹ · h⁻¹ at D = 0.025 h⁻¹ to 20.5 mmol of ethanol · g of dry yeast biomass⁻¹ · h⁻¹ at D = 0.28 h⁻¹. At even higher dilution rates, the fermentative capacity showed only a small further increase, up to 22.0 mmol of ethanol · g of dry yeast biomass⁻¹ · h⁻¹ at D = 0.40 h⁻¹. The activities of all glycolytic enzymes, pyruvate decarboxylase, and alcohol dehydrogenase were determined in cell extracts. Only the in vitro activities of pyruvate decarboxylase and phosphofructokinase showed a clear positive correlation with fermentative capacity. These enzymes are interesting targets for overexpression in attempts to improve the fermentative capacity of aerobic cultures grown at low specific growth rates.     

Role of rpoS in Escherichia coli O157:H7 Strain H32 Biofilm Development and Survival

The protein RpoS is responsible for mediating cell survival during the stationary phase by conferring cell resistance to various stressors and has been linked to biofilm formation. In this study, the role of the rpoS gene in Escherichia coli O157:H7 biofilm formation and survival in water was investigated. Confocal scanning laser microscopy of biofilms established on coverslips revealed a nutrient-dependent role of rpoS in biofilm formation, where the biofilm biomass volume of the rpoS mutant was 2.4- to 7.5-fold the size of its rpoS⁺ wild-type counterpart in minimal growth medium. The enhanced biofilm formation of the rpoS mutant did not, however, translate to increased survival in sterile double-distilled water (ddH₂O), filter-sterilized lake water, or unfiltered lake water. The rpoS mutant had an overall reduction of 3.10 and 5.30 log₁₀ in sterile ddH₂O and filter-sterilized lake water, respectively, while only minor reductions of 0.53 and 0.61 log₁₀ in viable counts were observed for the wild-type form in the two media over a 13-day period, respectively. However, the survival rates of the detached biofilm-derived rpoS⁺ and rpoS mutant cells were comparable. Under the competitive stress conditions of unfiltered lake water, the advantage conferred by the presence of rpoS was lost, and both the wild-type and knockout forms displayed similar declines in viable counts. These results suggest that rpoS does have an influence on both biofilm formation and survival of E. coli O157:H7 and that the advantage conferred by rpoS is contingent on the environmental conditions.     

Synergistic Interaction Between Anabaena and Zoogloea spp. in Carbon Dioxide-Limited Continuous Cultures

Flocs consisting of Anabaena and Zoogloea spp. were used as a model system for the study of planktonic phototroph-heterotroph interactions. In CO₂-limited continuous culture (3.2 μmol of NaHCO₃ liter⁻¹ h⁻¹, 1.5 μmol of glucose liter⁻¹ h⁻¹, pH 8.5, D = 0.026 h⁻¹), the biomass of the phototroph increased 8.6-fold due to association. However, direct CO₂ exchange accounted for only a 3.8-fold increase. When the glucose supply rate was increased to 7.5 μmol liter⁻¹ h⁻¹, there was a 26-fold increase in biomass. When CO₂ was supplied in excess, there was no difference due to association. In batch culture, using the same medium, the specific growth rate was 0.029 h⁻¹ for the phototroph alone and 0.047 h⁻¹ for the phototroph in association with the heterotroph. The stimulatory effect of the heterotroph was found only under CO₂-limiting conditions and was directly related to the concentration of organic matter supplied in the medium. Both the biomass and the growth rate of the Anabaena sp. were increased by association with the Zoogloea sp. Thus, dissolved organic matter may substitute for CO₂ to maximize both growth rate and biomass production by phototrophs when heterotrophic bacteria are present.     

In glucose-limited continuous culture the minimum substrate concentration for growth,smin, is crucial in the competition between the enterobacterium Escherichia coli and Chelatobacter heintzii,an environmentally abundant bacterium

The competition for glucose between Escherichia coli ML30, a typical copiotrophic enterobacterium and Chelatobacter heintzii ATCC29600, an environmentally successful strain, was studied in a carbon-limited culture at low dilution rates. First, as a base for modelling, the kinetic parameters μ_max and K_s were determined for growth with glucose. For both strains, μ_max was determined in batch culture after different precultivation conditions. In the case of C. heintzii, μ_max was virtually independent of precultivation conditions. When inoculated into a glucose-excess batch culture medium from a glucose-limited chemostat run at a dilution rate of 0.075 h⁻¹ C. heintzii grew immediately with a μ_max of 0.17±0.03 h⁻¹. After five transfers in batch culture, μ_max had increased only slightly to 0.18±0.03 h⁻¹. A different pattern was observed in the case of E. coli. Inoculated from a glucose-limited chemostat at D=0.075 h⁻¹ into glucose-excess batch medium E. coli grew only after an acceleration phase of ∼3.5 h with a μ_max of 0.52 h⁻¹. After 120 generations and several transfers into fresh medium, μ_max had increased to 0.80±0.03 h⁻¹. For long-term adapted chemostat-cultivated cells, a K_s for glucose of 15 μg l⁻¹ for C. heintzii, and of 35 μg l⁻¹ for E. coli, respectively, was determined in ¹⁴C-labelled glucose uptake experiments. In competition experiments, the population dynamics of the mixed culture was determined using specific surface antibodies against C. heintzii and a specific 16S rRNA probe for E. coli. C. heintzii outcompeted E. coli in glucose-limited continuous culture at the low dilution rates of 0.05 and 0.075 h⁻¹. Using the determined pure culture parameter values for K_s and μ_max, it was only possible to simulate the population dynamics during competition with an extended form of the Monod model, which includes a finite substrate concentration at zero growth rate (s_min). The values estimated for s_min were dependent on growth rate; at D=0.05 h⁻¹, it was 12.6 and 0 μg l⁻¹ for E. coli and C. heintzii, respectively. To fit the data at D=0.075 h⁻¹, s_min for E. coli had to be raised to 34.9 μg l⁻¹ whereas s_min for C. heintzii remained zero. The results of the mathematical simulation suggest that it is not so much the higher K_s value, which is responsible for the unsuccessful competition of E. coli at low residual glucose concentration, but rather the existence of a significant s_min.     

Development of a Biofilm Production-Deficient Escherichia coli Strain as a Host for Biotechnological Applications

Bacteria form biofilms by adhering to biotic or abiotic surfaces. This phenomenon causes several problems, including a reduction in the transport of mass and heat, an increase in resistance to antibiotics, and a shortening of the lifetimes of modules in bioindustrial fermentors. To overcome these difficulties, we created a biofilm production-deficient Escherichia coli strain, BD123, by deleting genes involved in curli biosynthesis and assembly, Δ(csgG-csgC); colanic acid biosynthesis and assembly, Δ(wcaL-wza); and type I pilus biosynthesis, Δ(fimB-fimH). E. coli BD123 remained mostly in the form of planktonic cells under the conditions tested and became more sensitive to the antibiotics streptomycin and rifampin than the wild-type E. coli MG1655: the growth of BD123 was inhibited by one-fourth of the concentrations needed to inhibit MG1655. In addition, the transformation efficiency of BD123 was about 20 times higher than that of MG1655, and the production and secretion of recombinant proteins were ~16% and ~25% greater, respectively, with BD123 than with MG1655. These results indicate that the newly created biofilm production-deficient strain of E. coli displays several key properties that substantially enhance its utility in the biotechnology arena.     

Contribution of rpoS and bolA genes in biofilm formation in Escherichia coli K-12 MG1655

Flexibility of gene expression in bacteria permits its survival in varied environments. The genetic adaptation of bacteria through systematized gene expression is not only important, but also clinically relevant in their ability to grow biofilms in stress environments. Stress responses enable their survival under more severe conditions, enhanced resistance and/or virulence. In Escherichia coli (E. coli), two of the possible important genes for biofilm growth are rpoS and bolA gene. RpoS is also called as a master regulator of general stress response. Even though many studies have revealed the importance of rpoS in planktonic cells, little is known about the functions of rpoS in biofilms. In contrast, bolA which is a morphogene in E. coli is overexpressed under stressed environments resulting in round morphology. The hypothesis is that bolA could be implicated in biofilm development. This study reviewed the literature with the aim of understanding the stress tolerance response of E. coli in relation with rpoS and bolA genes in different environmental conditions including heat shock, cold shock, and stress in response to oxidation, acidic condition and in presence of cadmium. Knowledge of the genetic regulation of biofilm formation may lead to the understanding of the factors that drive the bacteria to switch to the biofilm mode of growth.     

The basis of antagonistic pleiotropy in hfq mutations that have opposite effects on fitness at slow and fast growth rates

Mutations beneficial in one environment may cause costs in different environments, resulting in antagonistic pleiotropy. Here, we describe a novel form of antagonistic pleiotropy that operates even within the same environment, where benefits and deleterious effects exhibit themselves at different growth rates. The fitness of hfq mutations in Escherichia coli affecting the RNA chaperone involved in small-RNA regulation is remarkably sensitive to growth rate. E. coli populations evolving in chemostats under nutrient limitation acquired beneficial mutations in hfq during slow growth (0.1 h⁻¹) but not in populations growing sixfold faster. Four identified hfq alleles from parallel populations were beneficial at 0.1 h⁻¹ and deleterious at 0.6 h⁻¹. The hfq mutations were beneficial, deleterious or neutral at an intermediate growth rate (0.5 h⁻¹) and one changed from beneficial to deleterious within a 36 min difference in doubling time. The benefit of hfq mutations was due to the greater transport of limiting nutrient, which diminished at higher growth rates. The deleterious effects of hfq mutations at 0.6 h⁻¹ were less clear, with decreased viability a contributing factor. The results demonstrate distinct pleiotropy characteristics in the alleles of the same gene, probably because the altered residues in Hfq affected the regulation of expression of different genes in distinct ways. In addition, these results point to a source of variation in experimental measurement of the selective advantage of a mutation; estimates of fitness need to consider variation in growth rate impacting on the magnitude of the benefit of mutations and on their fitness distributions.     

Polyphosphate Degradation in Stationary Phase Triggers Biofilm Formation via LuxS Quorum Sensing System in Escherichia coli

In most natural environments, association with a surface in a structure known as biofilm is the prevailing microbial life-style of bacteria. Polyphosphate (polyP), an ubiquitous linear polymer of hundreds of orthophosphate residues, has a crucial role in stress responses, stationary-phase survival, and it was associated to bacterial biofilm formation and production of virulence factors. In previous work, we have shown that Escherichia coli cells grown in media containing a critical phosphate concentration >37 mM maintained an unusual high polyP level in stationary phase. The aim of the present work was to analyze if fluctuations in polyP levels in stationary phase affect biofilm formation capacity in E. coli. Polymer levels were modulated by the media phosphate concentration or using mutant strains in polyP metabolism. Cells grown in media containing phosphate concentrations higher than 25 mM were defective in biofilm formation. Besides, there was a disassembly of 24 h preformed biofilm by the addition of high phosphate concentration to the medium. These phenotypes were related to the maintenance or re-synthesis of polyP in stationary phase in static conditions. No biofilm formation was observed in ppk⁻ppx⁻ or ppk⁻ppx⁻/ppk⁺ strains, deficient in polyP synthesis and hydrolysis, respectively. luxS and lsrK mutants, impaired in autoinducer-2 quorum sensing signal metabolism, were unable to form biofilm unless conditioned media from stationary phase wild type cells grown in low phosphate were used. We conclude that polyP degradation is required for biofilm formation in sufficient phosphate media, activating or triggering the production of autoinducer-2. According to our results, phosphate concentration of the culture media should be carefully considered in bacterial adhesion and virulence studies.     

Chemostat Enrichments of Human Feces with Resistant Starch Are Selective for Adherent Butyrate-Producing Clostridia at High Dilution Rates

Resistant starch (RS) enrichments were made using chemostats inoculated with human feces from two individuals at two dilution rates (D = 0.03 h⁻¹ and D = 0.30 h⁻¹) to select for slow- and fast-growing amylolytic communities. The fermentations were studied by analysis of short-chain fatty acids, amylase and α-glucosidase activities, and viable counts of the predominant culturable populations and the use of 16S rRNA-targeted oligonucleotide probes. Considerable butyrate was produced at D = 0.30 h⁻¹, which corresponded with reduced branched-chain fatty acid formation. At both dilution rates, high levels of extracellular amylase activity were produced, while α-glucosidase was predominantly cell associated. Bacteroides and bifidobacteria predominated at the low dilution rate, whereas saccharolytic clostridia became more important at D = 0.30 h⁻¹. Microscopic examination showed that within 48 h of inoculation, one particular bacterial morphotype predominated in RS enrichments at D = 0.30 h⁻¹. This organism attached apically to RS granules and formed rosette-like structures which, with glycocalyx formation, agglomerated to form biofilm networks in the planktonic phase. Attempts to isolate this bacterium in pure culture were repeatedly unsuccessful, although a single colony was eventually obtained. On the basis of its 16S rDNA sequence, this RS-degrading, butyrate-producing organism was identified as being a previously unidentified group I Clostridium sp. A 16S rRNA-targeted probe was designed using this sequence and used to assess the abundance of the population in the enrichments. At 240 h, its contributions to total rRNA in the chemostats were 5 and 23% at D = 0.03 and 0.30 h⁻¹, respectively. This study indicates that bacterial populations with significant metabolic potential can be overlooked using culture-based methodologies. This may provide a paradigm for explaining the discrepancy between the low numbers of butyrate-producing bacteria that are isolated from fecal samples and the actual production of butyrate.     

Polyamines Stimulate the Level of the σ38 Subunit (RpoS) of Escherichia coli RNA Polymerase,Resulting in the Induction of the Glutamate Decarboxylase-dependent Acid Response System via the gadE Regulon

To study the physiological roles of polyamines, we carried out a global microarray analysis on the effect of adding polyamines to an Escherichia coli mutant that lacks polyamines because of deletions in the genes in the polyamine biosynthetic pathway. Previously, we have reported that the earliest response to polyamine addition is the increased expression of the genes for the glutamate-dependent acid resistance system (GDAR). We also presented preliminary evidence for the involvement of rpoS and gadE regulators. In the current study, further confirmation of the regulatory roles of rpoS and gadE is shown by a comparison of genome-wide expression profiling data from a series of microarrays comparing the genes induced by polyamine addition to polyamine-free rpoS⁺/gadE⁺ cells with genes induced by polyamine addition to polyamine-free ΔrpoS/gadE⁺ and rpoS⁺/ΔgadE cells. The results indicate that most of the genes in the E. coli GDAR system that are induced by polyamines require rpoS and gadE. Our data also show that gadE is the main regulator of GDAR and other acid fitness island genes. Both polyamines and rpoS are necessary for the expression of gadE gene from the three promoters of gadE (P1, P2, and P3). The most important effect of polyamine addition is the very rapid increase in the level of RpoS sigma factor. Our current hypothesis is that polyamines increase the level of RpoS protein and that this increased RpoS level is responsible for the stimulation of gadE expression, which in turn induces the GDAR system in E. coli.     

Planktonic-Cell Yield of a Pseudomonad Biofilm

Biofilm cells differ phenotypically from their free-floating counterparts. Differential growth rates in biofilms are often referred to, particularly in response to limited diffusion of oxygen and nutrients. We observed growth rates of attached Pseudomonas sp. strain CT07 cells that were notably higher than the maximum specific growth rate measured in batch culture. Despite dilution rates in continuous flow cells that exceeded the maximum planktonic specific growth rate by 58 times, sampling of the effluent revealed >10⁹ cells ml⁻¹, suggesting that biofilms function as a source of planktonic cells through high cell yield and detachment. Further investigation demonstrated considerable planktonic cell yield from biofilms as young as 6 h, indicating that detachment is not limited to established biofilms. These biofilm-detached cells were more sensitive to a commercial biocide than associated biofilm- and chemostat-cultivated populations, implying that detached biofilm cells exhibit a character that is distinct from that of attached and planktonic cell populations.     

Thermodynamics of Formate-Oxidizing Metabolism and Implications for H2 Production

Formate-dependent proton reduction to H₂ (HCOO⁻ + H₂O → HCO₃⁻ + H₂) has been reported for hyperthermophilic Thermococcus strains. In this study, a hyperthermophilic archaeon, Thermococcus onnurineus strain NA1, yielded H₂ accumulation to a partial pressure of 1 × 10⁵ to 7 × 10⁵ Pa until the values of Gibbs free energy change (ΔG) reached near thermodynamic equilibrium (−1 to −3 kJ mol⁻¹). The bioenergetic requirement for the metabolism to conserve energy was demonstrated by ΔG values as small as −5 kJ mol⁻¹, which are less than the biological minimum energy quantum, −20 kJ mol⁻¹, as calculated by Schink (B. Schink, Microbiol. Mol. Biol. Rev. 61:262-280, 1997). Considering formate as a possible H₂ storage material, the H₂ production potential of the strain was assessed. The volumetric H₂ production rate increased linearly with increasing cell density, leading to 2,820 mmol liter⁻¹ h⁻¹ at an optical density at 600 nm (OD₆₀₀) of 18.6, and resulted in the high specific H₂ production rates of 404 ± 6 mmol g⁻¹ h⁻¹. The H₂ productivity indicates the great potential of T. onnurineus strain NA1 for practical application in comparison with H₂-producing microbes. Our result demonstrates that T. onnurineus strain NA1 has a highly efficient metabolic system to thrive on formate in hydrothermal systems.     

Metabolic engineering of Bacillus amyloliquefaciens for poly-gamma-glutamic acid (γ-PGA) overproduction

We constructed a metabolically engineered glutamate-independent Bacillus amyloliquefaciens strain with considerable γ-PGA production. It was carried out by double-deletion of the cwlO gene and epsA-O cluster, as well as insertion of the vgb gene in the bacteria chromosome. The final generated strain NK-PV elicited the highest production of γ-PGA (5.12 g l⁻¹), which was 63.2% higher than that of the wild-type NK-1 strain (3.14 g l⁻¹). The γ-PGA purity also improved in the NK-PV strain of 80.4% compared with 76.8% for the control. Experiments on bacterial biofilm formation experiment showed that NK-1 and NK-c (ΔcwlO) strains can form biofilm; the epsA-O deletion NK-7 and NK-PV strains could only form an incomplete biofilm.     

Functional Heterogeneity of RpoS in Stress Tolerance of Enterohemorrhagic Escherichia coli Strains

The stationary-phase sigma factor (RpoS) regulates many cellular responses to environmental stress conditions such as heat, acid, and alkali shocks. On the other hand, mutations at the rpoS locus have frequently been detected among pathogenic as well as commensal strains of Escherichia coli. The objective of this study was to perform a functional analysis of the RpoS-mediated stress responses of enterohemorrhagic E. coli strains from food-borne outbreaks. E. coli strains belonging to serotypes O157:H7, O111:H11, and O26:H11 exhibited polymorphisms for two phenotypes widely used to monitor rpoS mutations, heat tolerance and glycogen synthesis, as well as for two others, alkali tolerance and adherence to Caco-2 cells. However, these strains synthesized the oxidative acid resistance system through an rpoS-dependent pathway. During the transition from mildly acidic growth conditions (pH 5.5) to alkaline stress (pH 10.2), cell survival was dependent on rpoS functionality. Some strains were able to overcome negative regulation by RpoS and induced higher β-galactosidase activity without compromising their acid resistance. There were no major differences in the DNA sequences in the rpoS coding regions among the tested strains. The heterogeneity of rpoS-dependent phenotypes observed for stress-related phenotypes was also evident in the Caco-2 cell adherence assay. Wild-type O157:H7 strains with native rpoS were less adherent than rpoS-complemented counterpart strains, suggesting that rpoS functionality is needed. These results show that some pathogenic E. coli strains can maintain their acid tolerance capability while compromising other RpoS-dependent stress responses. Such adaptation processes may have significant impact on a pathogen's survival in food processing environments, as well in the host's stomach and intestine.