Biodegradable PLGA microcarriers for injectable delivery of chondrocytes: effect of surface modification on cell attachment and function

Poly(D,L-lactic-co-glycolic acid) (PLGA) microspheres were prepared by an oil/water emulsion solvent evaporation method to use as an injectable microcarrier for cell delivery. Three different kinds of PLGA microspheres having hydrophobic, negatively charged, and positively charged surfaces were prepared. Hydrophobic and negatively charged PLGA microspheres were prepared by using terminally capped and uncapped PLGA polymer, respectively. Positively charged PLGA microspheres were prepared by blending PLGA with PLGA-g-poly(L-lysine) graft copolymer as a surface modifying agent. Bovine chondrocytes were cultured on the three PLGA microspheres under serum conditions to comparatively evaluate cell attachment, cell proliferation, and cell function with respect to surface properties. Positively charged PLGA microspheres showed the highest cell attachment, growth, and function compared to hydrophobic and negatively charged microspheres. Surface-modified PLGA microspheres can potentially be used as an injectable delivery system for cells into a tissue defect site.     

Identification of chemically modified peptide from poly(D,L-lactide-co-glycolide) microspheres under in vitro release conditions

The purpose of this research was to study the chemical reactivity of a somatostatin analogue octreotide acetate, formulated in microspheres with polymers of varying molecular weight and co-monomer ratio under in vitro testing conditions. Poly(D,L-lactide-co-glycolide) (PLGA) and poly(D,L-lactide) (PLA) microspheres were prepared by a solvent extraction/evaporation method. The microspheres were characterized for drug load, impurity content, and particle size. Further, the microspheres were subjected to in vitro release testing in acetate buffer (pH 4.0) and phosphate buffered saline (PBS) (pH 7.2). In acetate buffer, 3 microsphere batches composed of low molecular weight PLGA 50∶50, PLGA 85∶15, and PLA polymers (≤10 kDa) showed 100% release with minimal impurity formation (<10%). The high molecular weight PLGA 50∶50 microspheres (28 kDa) displayed only 70% cumulative release in acetate buffer with significant impurity formation (∼24%). In PBS (pH 7.4), on the other hand, only 50% release was observed with the same low molecular weight batches (PLGA 50∶50, PLGA 85∶15, and PLA) with higher percentages of hydrophobic impurity formation (ie, 40%, 26%, and 10%, respectively). In addition, in PBS, the high molecular weight PLGA 50∶50 microspheres showed only 20% drug release with ∼60% mean impurity content. The chemically modified peptide impurities inside microspheres were structurally confirmed through Fourier transform-mass spectrometry (FT-MS) and liquid chromatography/mass spectrometry (LC-MS/MS) analyses after extraction procedures. The adduct compounds were identified as covalently modified conjugates of octreotide with lactic and glycolic acid monomers within polymeric microspheres. The data suggest that due to steric hindrance factors, polymers with greater lactide content were less amenable to the formation of adduct impurities compared with PLGA 50∶50 copolymers.     

A protein delivery system: biodegradable alginate-chitosan-poly(lactic-co-glycolic acid) composite microspheres

In the present study we developed alginate-chitosan-poly(lactic-co-glycolic acid) (PLGA) composite microspheres to elevate protein entrapment efficiency and decrease its burst release. Bovine serum albumin (BSA), which used as the model protein, was entrapped into the alginate microcapsules by a modified emulsification method in an isopropyl alcohol-washed way. The rapid drug releases were sustained by chitosan coating. To obtain the desired release properties, the alginate-chitosan microcapsules were further incorporated in the PLGA to form the composite microspheres. The average diameter of the composite microcapsules was 31+/-9microm and the encapsulation efficiency was 81-87%, while that of conventional PLGA microspheres was just 61-65%. Furthermore, the burst releases at 1h of BSA entrapped in composite microspheres which containing PLGA (50:50) and PLGA (70:30) decreased to 24% and 8% in PBS, and further decreased to 5% and 2% in saline. On the contrary, the burst releases of conventional PLGA microspheres were 48% and 52% in PBS, respectively. Moreover, the release profiles could be manipulated by regulating the ratios of poly(lactic acid) to poly(glycolic acid) in the composite microspheres.     

Repair effect of diabetic ulcers with recombinant human epidermal growth factor loaded by sustained-release microspheres

In this study the w/o/w extraction-evaporation technique was adopted to prepare poly(lactic-co-glycolic acid) (PLGA) microspheres loading recombinant human epidermal growth factor (rhEGF). The microspheres were characterized for morphology by transmission electron microscopy (TEM) and particle size distribution. The release performances, the proliferation effects and therapeutic effects of rhEGF-loaded PLGA microspheres were all studied. The results showed that these spherical microspheres had a narrow size distribution and a high drug encapsulation efficiency (85.6%). RhEGF-loaded microspheres enhanced the growth rate of fibroblasts and wound healing more efficiently than pure rhEGF. The number of the proliferating cell nuclear antigen (PCNA) in the epidermis layer with the microsphere treatment was significantly larger than those of the control groups. Overall locally sustained delivery of rhEGF from biodegradable PLGA microspheres may serve as a novel therapeutic strategy for diabetic ulcer repair.     

Alginate microspheres encapsulated with autoclaved Leishmania major (ALM) and CpG-ODN induced partial protection and enhanced immune response against murine model of leishmaniasis

A suitable adjuvant and delivery system are needed to enhance efficacy of vaccines against leishmaniasis. In this study, alginate microspheres as an antigen delivery system and CpG-ODN as an immunoadjuvant were used to enhance immune response and induce protection against an experimental autoclaved Leishmania major (ALM) vaccine. Alginate microspheres were prepared by an emulsification technique and the characteristics of the preparation such as size, encapsulation efficiency and release profile of encapsulates were studied. Mean diameter of microspheres was determined using SEM (Scanning Electron Microscopy) and particle size analyzer. The encapsulation efficiency was determined using Lowry protein assay method. The integrity of ALM antigens was assessed using SDS–PAGE. Mean diameter of microspheres was 1.8 ± 1.0 μm. BALB/c mice were immunized three times in 3-weeks intervals with ALM + CpG-ODN loaded microspheres [(ALM + CpG)_ALG], ALM encapsulated alginate microspheres [(ALM)_ALG], (ALM)_ALG + CpG, ALM + CpG, ALM alone or PBS. The intensity of infection induced by L. major challenge was assessed by measuring size of footpad swelling. The strongest protection was observed in group of mice immunized with (ALM + CpG)_ALG. The groups of mice received (ALM + CpG)_ALG, (ALM)_ALG + CpG, (ALM)_ALG and ALM + CpG were also showed a significantly (P < 0.05) smaller footpad swelling compared with the group that received either ALM alone or PBS. The mice immunized with (ALM + CpG)_ALG or ALM + CpG showed the significantly (P < 0.05) highest IgG2a/IgG1 ratio. The IFN-γ level was significantly (P < 0.0001) highest in group of mice immunized with either (ALM)_ALG + CpG or ALM + CpG. It is concluded that alginate microspheres and CpG-ODN adjuvant when are used simultaneously induced protection and enhanced immune response against ALM antigen.     

Preparation and characterization of poly(D,L-lactide-co-glycolide) microspheres for controlled release of human growth hormone

The purpose of this research was to assess the physicochemical properties of a controlled release formulation of recombinant human growth hormone (rHGH) encapsulated in poly(D,L-lactide-co-glycolide) (PLGA) composite microspheres. rHGH was loaded in poly(acryloyl hydroxyethyl) starch (acHES) microparticles, and then the protein-containing microparticles were encapsulated in the PLGA matrix by a solvent extraction/evaporation method. rHGH-loaded PLGA microspheres were also prepared using mannitol without the starch hydrogel microparticle microspheres for comparison. The detection of secondary structure changes in protein was investigated by using a Fourier Transfer Infrared (FTIR) technique. The composite microspheres were spherical in shape (44.6±2.47 μm), and the PLGA-mannitol microspheres were 39.7±2.50 μm. Drug-loading efficiency varied from 93.2% to 104%. The composite microspheres showed higher overall drug release than the PLGA/mannitol microspheres. FTIR analyses indicated good stability and structural integrity of HGH localized in the microspheres. The PLGA-acHES composite microsphere system could be useful for the controlled delivery of protein drugs.     

Effect of a freeze-dried CMC/PLGA microsphere matrix of rhBMP-2 on bone healing

The hypothesis of this research was that implants of poly(lactide-co-glycolide) (PLGA) microspheres loaded with bone morphogenetic protein-2 (rhBMP-2) and distributed in a freeze-dried carboxymethylcellulose (CMC) matrix would produce more new bone than would matrix implants of non-protein-loaded microspheres or matrix implants of only CMC. To test this hypothesis it was necessary to fashion microsphere-loaded CMC implants that were simple to insert, fit precisely into a defect, and would not elicit swelling. Microspheres were produced via a water-in-oil-in-water double-emulsion system and were loaded with rhBMP-2 by soaking them in a buffered solution of the protein at a concentration of 5.4 mg protein per gram of PLGA. Following recovery of the loaded microspheres by lyophilization matrices for implantation were prepared by lyophilizing a suspension of the microspheres in 2% CMC in flat-bottom tissue culture plates. Similar matrices were made with 2% CMC and with 2% CMC containing blank microspheres. A full-thickness calvarial defect model in New Zealand white rabbits was used to assess bone growth. Implants fit the defect well allowing for direct application. Six weeks postsurgery, defects were collected and processed for undecalcified histology. In vitro, 60% of the loaded rhBMP-2 released from devices or microspheres in 5 to 7 days. With the unembedded microspheres releasing faster than those embedded in CMC In vivo. the rhBMP-2 microspheres greatly enhanced bone healing, whereas nonloaded PLGA microspheres in the CMC implants had little effect. The results showed that a lyophilized device of rhBMP-2 PLGA microspheres in CMC was an effective implantable protein-delivery system for the use in bone repair. Published: October 7. 2001.     

Repair effect of diabetic ulcers with recombinant human epidermal growth factor loaded by sustained-release microspheres

In this study the w/o/w extraction–evaporation technique was adopted to prepare poly(lactic-co-glycolic acid) (PLGA) microspheres loading recombinant human epidermal growth factor (rhEGF). The micro-spheres were characterized for morphology by transmission electron microscopy (TEM) and particle size distribution. The release performances, the proliferation effects and therapeutic effects of rhEGF-loaded PLGA microspheres were all studied. The results showed that these spherical micro-spheres had a narrow size distribution and a high drug encapsulation efficiency (85.6%). RhEGF-loaded microspheres enhanced the growth rate of fibroblasts and wound healing more efficiently than pure rhEGF. The number of the proliferating cell nuclear antigen (PCNA) in the epidermis layer with the mi-crosphere treatment was significantly larger than those of the control groups. Overall locally sustained delivery of rhEGF from biodegradable PLGA microspheres may serve as a novel therapeutic strategy for diabetic ulcer repair.     

Accelerated Polymer Biodegradation of Risperidone Poly(d, l-Lactide-Co-Glycolide) Microspheres

The influence of a tertiary amine, namely risperidone (pKa = 7.9) on the degradation of poly(d, l lactide-co-glycolide) (PLGA) microspheres was elucidated. Risperidone and blank microspheres were fabricated at two lactide/glycolide ratios, 65:35 and 85:15. The microspheres were characterized for drug loading by high-performance liquid chromatography, particle size by laser diffractometry, and surface morphology by scanning electron microscopy. Polymer degradation studies were carried out with drug-loaded microspheres and blank microspheres in presence of free risperidone in 0.02 M PBS containing 0.02% Tween®80 at 37°C. Molecular weight was monitored by gel permeation chromatography. Risperidone and blank microspheres had similar size distribution and were spherical with a relatively nonporous smooth surface. The presence of risperidone within the microspheres enhanced the hydrolytic degradation in both polymeric matrices with faster degradation occurring in 65:35 PLGA. The molecular weight decreased according to pseudo-first-order kinetics for all the formulations. During the degradation study, the surface morphology of drug-loaded microspheres was affected by the presence of risperidone and resulted in shriveled microspheres in which there appeared to be an intrabatch variation with the larger microspheres being less shriveled than the smaller ones. When blank microspheres were incubated in free risperidone solutions, a concentration-dependent effect on the development of surface porosity could be observed. Risperidone accelerates the hydrolytic degradation of PLGA, presumably within the microenvironment of the drug-loaded particles, and this phenomenon must be taken into consideration in designing PLGA dosage forms of tertiary amine drugs.Key words: mass loss, microencapsulation, PLGA microspheres, polymer degradation, risperidone, tertiary amine drug     

重组人粒细胞集落刺激因子缓释微球的研究

目的：研究固体／油／水法制备重组人粒细胞集落刺激因子缓释微球,为开发其缓释剂型进行初步研究。方法：以聚乳酸．聚羟乙酸共聚物（PLGA）为载体材料：用固体／油／水法和水／油／水法制备载rhG-CSF缓释微球;考察粒径大小、外观、包封率等理化性质;用MieroBCA法考察微球的体外释药特性及影响因素;用SEC-HPLC和MTT比色法初步评价了微球制备工艺过程对rhG-CSF稳定性的影响。结果：两种方法制得的微球形态圆整、分散性良好,包封率均超过80％。固／油／水法制得的微球体外释放在2周内可超过90％,而水／油／水法制得的微球在相同的时间内仅释放30％。对于固／油／水法制备过程,SEC-HPLC法测定蛋白无明显聚集体出现,MTT法测定蛋白活性无明显损失。结论：实验证明了固／油／水法制备的PLGA微球可以实现2周以上的体外缓释。     

Formulation and in vitro transfection efficiency of poly (D, L-lactideco-glycolide) microspheres containing plasmid DNA for gene delivery

The stability, in vitro release, and in vitro cell transfection efficiency of plasmid DNA (pDNA) poly (D,L.-lactide-co-glycolide) (PLGA) microsphere formulations were investigated. PLGA microspheres containing free and polylysine (PLL)-complexed pDNA were prepared by a water-oil-water solvent extraction/evaporation technique. Encapsulation enhanced the retention of the supereoiled structure of pDNA as determined by gel electrophoresis. PLL complexation of pDNA prior to encapsulation increased both the stability of the supercoiled form and the encapsulation efficiency. Free pDNA was completely degraded after exposure to DNase while encapsulation protected the pDNA from enzymatic degradation. Rapid initial in vitro release of pDNA was obtained from microspheres containing free pDNA. while the release from microspheres containing PLL-complexed pDNA was sustained for more than 42 days. Bioactivity of encapsulated pDNA determined by in vitro cell transfection using Chinese hamster ovary cells (CHO) showed that the bioactivity of encapsulated pDNA was retained in both formulations but to a greater extent with PLL-complexed pDNA microspheres. These results demonstrated that PLGA microspheres could be used to formulate a controlledrelease delivery system for pDNA that can protect the pDNA from DNase degradation without loss of functional activity.     

Porous bone morphogenetic protein-2 microspheres: Polymer binding and in vitro release

This research compared the binding and release of recombinant human bone morphogenetic protein 2 (rhBMP-2) with a series of hydrophobic and hydrophilic poly-lactide-co-glycolide (PLGA) copolymers. Porous microspheres were produced via a double emulsion process. Binding and incorporation of protein were achieved by soaking microspheres in buffered protein solutions, filtering, and comparing protein concentration remaining to nonmicrosphere-containing samples. Protein release was determined by soaking bound microspheres in a physiological buffer and measuring protein concentration (by reversed-phase high-performance liquid chromatography) in solution over time. Normalized for specific surface area and paired by polymer molecular weight. microspheres made from hydrophilic 50∶50 or 75∶25 PLGA bound significantly more protein than microspheres made from the corresponding hydrophobic PLGA. Increased binding capacity correlated with higher polymer acid values. With certain polymers, rhBMP-2 adsorption was decreased or inhibited at high protein concentration, but protein loading could be enhanced by increasing the protein solution:PLGA (volume:mass) ratio or by repetitive soaking. Microspheres of various PLGAs released unbound protein in 3 days, whereas the subsequent bound protein release corresponded to mass loss. RhBMP-2 binding to PLGA was controlled by the acid value, protein concentration, and adsorption technique. The protein released in 2 phases: the first occurred over 3 days regardless of PLGA used and emanated from unbound, incorporated protein, while the second was controlled by mass loss and therefore was dependent on the polymer molecular weight. Overall, control of rhBMP-2 delivery is achievable by selection of PLGA microsphere carriers. Published: October, 7, 2001.     

Synthesis and Characterization of PLGA Shell Microcapsules Containing Aqueous Cores Prepared by Internal Phase Separation

The preparation of microcapsules consisting of poly(d,l-lactide-co-glycolide) (PLGA) polymer shell and aqueous core is a clear challenge and hence has been rarely addressed in literature. Herein, aqueous core-PLGA shell microcapsules have been prepared by internal phase separation from acetone-water in oil emulsion. The resulting microcapsules exhibited mean particle size of 1.1?±?0.39 μm (PDI?=?0.35) with spherical surface morphology and internal poly-nuclear core morphology as indicated by scanning electron microscopy (SEM). The incorporation of water molecules into PLGA microcapsules was confirmed by differential scanning calorimetry (DSC). Aqueous core-PLGA shell microcapsules and the corresponding conventional PLGA microspheres were prepared and loaded with risedronate sodium as a model drug. Interestingly, aqueous core-PLGA shell microcapsules illustrated 2.5-fold increase in drug encapsulation in comparison to the classical PLGA microspheres (i.e., 31.6 vs. 12.7%), while exhibiting sustained release behavior following diffusion-controlled Higuchi model. The reported method could be extrapolated to encapsulate other water soluble drugs and hydrophilic macromolecules into PLGA microcapsules, which should overcome various drawbacks correlated with conventional PLGA microspheres in terms of drug loading and release.     

Derivation of an Analytical Solution to a Reaction-Diffusion Model for Autocatalytic Degradation and Erosion in Polymer Microspheres

A mathematical reaction-diffusion model is defined to describe the gradual decomposition of polymer microspheres composed of poly(D,L-lactic-co-glycolic acid) (PLGA) that are used for pharmaceutical drug delivery over extended periods of time. The partial differential equation (PDE) model treats simultaneous first-order generation due to chemical reaction and diffusion of reaction products in spherical geometry to capture the microsphere-size-dependent effects of autocatalysis on PLGA erosion that occurs when the microspheres are exposed to aqueous media such as biological fluids. The model is solved analytically for the concentration of the autocatalytic carboxylic acid end groups of the polymer chains that comprise the microspheres as a function of radial position and time. The analytical solution for the reaction and transport of the autocatalytic chemical species is useful for predicting the conditions under which drug release from PLGA microspheres transitions from diffusion-controlled to erosion-controlled release, for understanding the dynamic coupling between the PLGA degradation and erosion mechanisms, and for designing drug release particles. The model is the first to provide an analytical prediction for the dynamics and spatial heterogeneities of PLGA degradation and erosion within a spherical particle. The analytical solution is applicable to other spherical systems with simultaneous diffusive transport and first-order generation by reaction.     

Preparation,in vitro release,in vivo absorption and biocompatibility studies of insulin-loaded microspheres in rabbits

The purpose of this study was to develop a single-dose insulin delivery system based on poly (lactide-co-glycolide) (PLGA) microspheres to provide basal insulin level for a prolonged period. Insulin-loaded PLGA microspheres were prepared by water-in-oil-in-water double emulsion (batch A) and solid-in-oil-in-water emulsion (batch B) methods. Microspheres were characterized for physical characteristics and in vitro release. In vivo absorption of insulin and biocompatibility of insulin-loaded PLGA microspheres were performed in diabetic New Zealand white rabbits. Light and transmission electron microscopy were performed on the skin tissues excised from microspheres injected sites in order to study the biocompatibility. The burst release of insulin was high (47%) from batch B and low (5%) from batch A. Therefore, we mixed microspheres of batch A and B in ratio of 3:1 w/w, which produced desirable in vitro release profile. In vivo absorption study showed that insulin-loaded microspheres provided a serum insulin level of 20-40 microU/ml up to 40 days. Biocompatibility study provided evidence of normal inflammatory and foreign body reactions, which were characterized by the presence of macrophages, fibroblasts and foreign body giant cells. Neither necrosis nor tissue damage was identified. At the end of 12 weeks, no distinct histological differences were observed in comparison to the control tissue samples. In conclusion, insulin-loaded PLGA microspheres controlled the in vivo absorption of insulin to maintain the basal insulin level for longer period and the delivery system was biocompatible.     

影响PLGA微球包封率和粒径相关因素研究进展

聚乳酸乙醇酸共聚物(PLGA)是一种可生物降解的高分子聚合物,具有良好的生物相容性,其降解产物为乳酸和乙醇酸,是机体正常代谢的中间产物,最终可分解为二氧化碳和水,并分别经肺和肾脏排出体外,对人体不产生危害,所以PLGA在微球制剂的制备中常作为首选载体。近年来PLGA微球制剂在医药领域有着飞跃发展,尤其是在抗肿瘤、免疫疫苗、蛋白给药、基因治疗、诊断试剂和细胞支架等方面显现出很大优势。而且已有许多PLGA微球获得美国FDA批准上市,临床应用也有令人满意的效果,未见报道有严重的不良反应。但现阶段国内生产的PLGA缓释微球的质量还有很多不足之处如微球粒径偏大、包封率和载药量偏低、突释过大等,有待进一步提高和改进。本文将综述在制备包裹水溶性药物的PLGA微球过程中相关因素如药物本身理化性质、制备方法、PLGA结构特点、有机溶剂等对微球粒径、包封率的影响,以期为提高以PLGA为药物载体的药效奠定良好的理论基础。     

Molecular recognition by Kluyveromyces of amphotericin B-loaded, galactose-tagged, poly (lactic acid) microspheres

In an effort to develop a new way of drug delivery, especially for polyenic antifungal molecules, we have incorporated amphotericin B (AmB) into biodegradable galactosylated poly (L-lactic acid) (L-PLA) and poly (L-lactic-co-glycolic acid) (PLGA) microspheres. These drug carriers were prepared by solvent evaporation using an oil/water (o/w) emulsion. The ratio of galactosyl spacers with different chain lengths was 1.74-2.78%. The maximal quantity of AmB encapsulated reported to 100 mg of the galactosylated microspheres was 7.14 mg for L-PLA (encapsulation rate 45% of mole) and 6.42 mg for PLGA derivatives (encapsulation rate 81% of mole). In our yeast model, drug release depended on three factors: (i) presence of galactosylated antennae, (ii) length of galactosyl antenna and (iii) nature of the polymer. More of the AmB trapped in PLGA microspheres was released than from PLA microspheres. These novel functionalised microspheres could be required for the delivering of therapeutic agents according to their recognition to specific cells.     

Production of microspheres with surface amino groups from blends of Poly(Lactide-co-glycolide) and Poly(epsilon-CBZ-L-lysine) and use for encapsulation.

Microspheres were formed from blends of the biodegradable polymer poly(DL-lactic-co-glycolic acid) (PLGA) together with poly(epsilon-CBZ-L-lysine) (PCBZL) by a double-emulsification/solvent evaporation technique. The size of the microspheres formed by this method was dependent both on the total concentration of the polymers and on the ratio of PLGA to PCBZL. The use of the microspheres for encapsulation was demonstrated by the inclusion of a solution of Texas Red fluorescent dye. Lysine epsilon-amino groups on the surface of the microspheres were deprotected by acid hydrolysis or lithium/liquid ammonia reduction. Acid hydrolysis damaged the surface of the microspheres as assessed by scanning electron microscopy, whereas deprotection by lithium/ammonia produced less damage and allowed the retention of encapsulated dye solution. The surface lysine groups made available on the surface of the microspheres could be used to covalently link a variety of biologically active molecules to alter their in vivo properties and allow targeting to specific cell types.     

Formation of acylated growth hormone-releasing peptide-6 by poly(lactide-co-glycolide) and its biological activity

The purpose of this study was to investigate the formation of acylated impurity resulting from a chemical reaction between the growth hormone-releasing peptide-6 (GHRP-6) and poly(lactide-co-glycolide) (PLGA) and the effect of peptide acylation on the in vivo biological activity of GHRP-6. The peptide acylation pattern of GHRP-6 by hydrophilic PLGA polymers with different molecular weights was characterized by reversed-phase high-performance liquid chromatography and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. Higher levels of acylated GHRP-6 were produced with the higher molecular weight PLGA, which might be due to the slower degradation rate of the polymer. The evaluation of the biological activity in rats showed that the acylated GHRP-6 had a much lower activity than the intact GHRP-6. This finding suggests that the acylation reaction would decrease the effectiveness of the GHRP-6 formulation such as PLGA microspheres. There-fore, a strategy for stabilizing the GHRP-6 will be necessary for the development of a successful formulation of PLGA microspheres. Published: June 8, 2007     

Uptake and transport of copolymer biodegradable microspheres by rabbit Peyer's patch M cells

In this study, we demonstrate the role of M cells in uptake of poly(D-L-lactic-co-glycolic acid) (PLGA) microspheres and transport into rabbit Peyer's patches. Microspheres 1 to 10 m in diameter composed of 50:50 lactic acid:glycolic acid were instilled into in-testinal segments containing jejunal or ileal Peyer's patches, and uptake by M cells was examined by electron microscopy. PLGA microspheres visualized as electron-lucent, spherical particles were taken up by M cells by pseudopod-like extensions of the M cell apical membrane and translocated to the pocket region containing mononuclear leukocytes within 60 min. These results indicate that PLGA microspheres can be directed to M cell apical surfaces for delivery to immunocompetent cells in gut-associated lymphoid tissues.