Expression from cell type-specific enhancer-modified retroviral vectors after transduction: influence of marker gene stability

The enhanced green fluorescent protein (EGFP) is increasingly used as a reporter gene in viral vectors for a number of applications. To establish a system to study the activity of cis-acting cellular regulatory sequences, we deleted the viral enhancer in EGFP-carrying retroviral vectors and replaced it with cell type-specific elements. In this study, we use this system to demonstrate the activity of the human CD2 lymphoid-specific and the Tie2 endothelial cell type-specific enhancers in cell lines and in primary cells transduced by retroviral vectors. Furthermore, we compare findings obtained with EGFP as the reporter gene to those obtained replacing EGFP with d2EGFP, an unstable variant of EGFP characterized by a much shorter half-life compared to EGFP, and by reduced accumulation in the cells. d2EGFP-carrying vectors were generated at titers which were not different from those generated by the corresponding vectors carrying EGFP. Moreover, the activity of a Moloney murine leukemia virus enhancer could be readily detected following transduction of target cells with either EGFP- or d2EGFP-carrying vectors. However, the activity of the relatively weak CD2 and Tie2 enhancers was exclusively detected using EGFP as the reporter gene.These findings indicate that enhancer replacement is a feasible and promising approach to address the function of cell type-specific regulatory elements in retroviral vectors carrying the EGFP gene.     

Antibody-directed targeting of retroviral vectors via cell surface antigens

Targeted stable transduction of specific cells is a highly desirable goal for gene therapy applications. We report an efficient and broadly applicable approach for targeting retroviral vectors to specific cells. We find that the envelope of the alphavirus Sindbis virus can pseudotype human immunodeficiency virus type 1- and murine leukemia virus-based retroviral vectors. When modified to contain the Fc-binding domain of protein A, this envelope gives a significant enhancement in specificity in combination with antibodies specific for HLA and CD4 relative to that without antibody. Unlike previous targeting strategies for retroviral transduction, the virus titers are relatively high and stable and can be further increased by ultracentrifugation. This study provides proof of principle for a targeting strategy that would be generally useful for many gene therapy applications.     

Transient gene expression mediated by integrase-defective retroviral vectors

Nonintegrating retroviral vectors were produced from a Moloney murine leukemia virus (MoMLV)-based retroviral vector system by introducing a point mutation into the integrase (IN) gene of the packaging plasmid. The efficacy of IN-defective retroviral vectors was measured through the transient expression of ZsGreen or luciferase in human cell lines. The IN-defective retroviral vectors could transduce target cells efficiently, but their gene expression was transient and lower than that seen with the integrating vectors. IN-defective retroviral vector gene expression decreased to background levels in fewer than 10 days. Southern blot analysis of transduced K562 cells confirmed the loss of a detectable vector sequence by 15 days. The residual integration activity of the IN-defective vector was 1000- to 10,000-fold lower than that of the integrating vector. These results demonstrate that the IN-defective retroviral vectors can provide a useful tool for efficient transient gene expression targeting of primary hematopoietic stem cells and lymphoid cells.     

Gene therapy using retroviral vectors

Gene therapy is a novel approach for treating various congenital and acquired genetic disorders, including cancer, heart disease, and acquired immune deficiency syndrome. Amongst possible gene delivery systems, retroviral vector mediated gene transfer has been the most extensively studied and has been approved for use in over 40 current Phase I/II clinical trials for the treatment of various disorders, primarily cancers. Recent technological improvements include the optimization of vector production by concentration and lyophilization, resulting in high titers of vectors, as well as the large-scale production of vector-produced cells for the treatment of brain cancer. Present clinical protocols require specialized care centers with expertise in molecular biology and cell transplantation. Considerable effort is under way to develop retroviral vectors that can be both injected directly into the body and targeted to specific cell types within the body. Such vectors could be administered to patients by physicians in their offices. Successful development of this new technology would greatly expand the clinical potential of gene therapy.     

Approaches to enhancing the retroviral transduction of human synoviocytes

This report concerns a clinical trial for rheumatoid arthritis (RA), approved by the US National Institutes of Health and the Food and Drug Administration. An amphotropic retrovirus (MFG-IRAP) was used ex vivo to transfer a cDNA encoding human interleukin-1 receptor antagonist (IL-1Ra) to synovium. The protocol required the transduced cells to secrete at least 30 ng IL-1Ra/10⁶ cells per 48 h before reimplantation. Here we have evaluated various protocols for their efficiency in transducing cultures of human rheumatoid synoviocytes. The most reliably efficient methods used high titer retrovirus (approximately 10⁸ infectious particles/ml). Transduction efficiency was increased further by exposing the cells to virus under flow-through conditions. The use of dioctadecylamidoglycylspermine (DOGS) as a polycation instead of Polybrene (hexadimethrine bromide) provided an additional small increment in efficiency. Under normal conditions of static transduction, standard titer, clinical grade retrovirus (approximately 5 × 10⁵ infectious particles/ml) failed to achieve the expression levels required by the clinical trial. However, the shortfall could be remedied by increasing the time of transduction under static conditions, transducing under flow-through conditions, or transducing during centrifugation.     

Q vectors, bicistronic retroviral vectors for gene transfer

We have developed a retroviral vector that incorporates unique features of some previously described vectors. This vector includes: 3' long terminal repeats (LTRs) of the self-inactivating class; a 5' LTR that is a hybrid of the cytomegalovirus (CMV) enhancer and the mouse sarcoma virus promoter; an internal CMV immediate early region promoter to drive expression of the transduced gene and the neomycin phosphotransferase selectable marker; an expanded multiple cloning site and an internal ribosome entry site. An SV40 ori was introduced into the vector backbone to promote high copy number replication in packaging cell lines that express the SV40 large T antigen. We demonstrate that these retroviral constructs, designated Q vectors, can be used in applications where high viral titers and high level stable or transient gene expression are desirable.     

A speedy method to detect inserted DNA fragment in cell lines transfected with retroviral vectors

Cells transfected by retroviral vectors are brought in agene of particular interest and are very useful in avariety of experiments. It is essential to testify that theDNA fragment was successfully introduced into the cellstogether with the retroviral vectors. Polymerase chainreaction is believed to be a fast and convenient method forthis purpose when using primers flanking the cloning siteof the inserted DNA. Unfortunately, a single PCR reactionoften fails to amplify the targeted fragment because of theexistence of endogenous virus DNA in cell genome. However,in this study we conducted a procedure for a single PCR,using vector-specific primers as well as a nested PCR, andsuccessfully detected the DNA fragments cloned in MFGretroviral vectors in 22 transfected cell lines. We alsoproved that real time quantitative PCR in combination withMFG-specific primer is useful to determine copy number ofthe retroviral vector in murine producer cell lines.     

Induction of anti-HIV-1 immune responses by retroviral vectors.

Retroviral vectors encoding HIV-1 proteins, in particular, the envelope from HIV-1 IIIB, have been constructed and used to generate infectious vector particles. Murine cells transduced with these vectors express HIV proteins. Vector-transduced cells, when injected into syngeneic BALB/c mice, induce potent CD8+, class I MHC-restricted cytotoxic T-lymphocyte responses and elicit the production of neutralizing antibody specific for HIV-1. The induction of similar responses in primates may provide the basis for considering the use of these vectors as immunostimulants in humans. The retroviral vectors or vector-transduced cells would probably be first employed as an immunotherapeutic for HIV-infected individuals.     

Effects of culture parameters on the production of retroviral vectors by a human packaging cell line

The use of retroviral vectors for human gene therapy requires the production of large quantities of high titer vector stocks. Maintaining high titers during the prolonged culture of packaging cells will require that critical parameters be controlled. The aim of this study was to determine which culture parameters critically affect the production/decay of retroviral vectors produced by the human packaging cell line FLYRD18/LNC-hB7. The stability of retroviral vectors released by this cell line was found to be temperature dependent (half-life of 6.9, 11.0, and 64.3 h when incubated at 37, 32, and 0 degrees C, respectively). Titers increased up to 10-fold when the packaging cells were cultured at 32 degrees C, compared to 37 degrees C, despite a decrease in cell yield (cell-specific titers were 20-fold higher). Virus titers were also over 10-fold higher when the packaging cells were cultured in a reduced serum concentration (1%) compared to 5%. Retrovirus production at a range of pH levels revealed a significant decrease in virus titer at pH levels below 6.8 and above 7.2, optimum titers being achieved in cultures at pH 7.2. Dissolved oxygen levels in the range 20-80% did not significantly affect titers under the conditions tested. Finally, a packed bed system containing the packaging cells immobilized on porous microcarriers was shown to sustain the production of active retroviral vectors for over 1 month, in relatively large volumes.     

Transduction of human embryonic stem cells by ecotropic retroviral vectors

The steadily increasing availability of human embryonic stem (hES) cell lines has created strong interest in applying available tools for gene transfer in murine cells to human systems. Here we present a method for the transduction of hES cells with ecotropic retroviral vectors. hES cells were transiently transfected with a construct carrying the murine retrovirus receptor mCAT1. Subsequently, the cells were exposed to replication-deficient Moloney murine leukemia virus (MoMuLV) derivatives or pseudotyped lentiviral vectors. With oncoretroviral vectors, this procedure yields overall transduction efficiencies of up to 20% and permits selection of permanently transduced clones with high frequency. Selected clones maintained expression of pluripotency-associated markers and exhibited multi-germ layer differentiation both in vitro and in vivo. HES cell-derived somatic cells including neural progeny maintained high levels of transgene expression. Lentiviral vectors pseudotyped with the MoMuLV envelope could be introduced in the same manner with efficiencies of up to 33%. Transgene expression of lentivirally transduced hES cells remained permanent after differentiation even without selection pressure. Bypassing the regulatory issues associated with the use of amphotropic retroviral systems and exploiting the large pool of existing murine vectors, this method provides a safe and versatile tool for gene transfer and lineage analysis in hES cells and their progeny.     

Targeting rare populations of murine antigen-specific T lymphocytes by retroviral transduction for potential application in gene therapy for autoimmune disease

CD4+ T cells are important mediators in the pathogenesis of autoimmunity and would therefore provide ideal candidates for lymphocyte-based gene therapy. However, the number of Ag-specific T cells in any single lesion of autoimmunity may be quite low. Successful gene transfer into autoantigen-specific CD4+ T cells would serve as an ideal vehicle for site-targeted gene therapy if it were possible to transduce preferentially the small number of autoantigen-specific T cells. In this study we have demonstrated that retroviral infection of CD4+ lymphocytes from either autoantigen-stimulated TCR transgenic mice, or Ag-activated immunized nontransgenic mice, with a retroviral vector (pGCIRES), resulted in the transduction of only the limited number of Ag-reactive CD4+ T cells. In contrast, polyclonal activation of the same cultures resulted in transduction of non-antigen-specific lymphocytes. Transduction of Ag-reactive CD4+ T cells with pGCIRES retrovirus encoding the regulatory genes IL-4 (IL4) and soluble TNF receptor (STNFR) resulted in stable integration and long-term expression of recombinant gene products. Moreover, expression of the pGCIRES marker protein, GFP, directly correlated with the expression of the upstream regulatory gene. Retroviral transduction of CD4+ T cells targeted specifically Ag-reactive cells and was cell cycle-dependent and evident only during the mitosis phase. These studies suggest that retroviral transduction of autoantigen-specific murine CD4+ T cells, using the pGCIRES retroviral vector, may provide a potential method to target and isolate the low frequency of autoantigen-specific murine CD4+ T cells, and provides a rational approach to gene therapy in animal models of autoimmunity.     

Cell cycle requirements for transduction by foamy virus vectors compared to those of oncovirus and lentivirus vectors

Retroviral vectors based on foamy viruses (FV) are efficient gene delivery vehicles for therapeutic and research applications. While previous studies have shown that FV vectors transduce quiescent cell cultures more efficiently than oncoviral vectors, their specific cell cycle requirements have not been determined. Here we compare the transduction frequencies of FV vectors with those of onco- and lentiviral vectors in nondividing and dividing normal human fibroblasts by several methods. FV vectors transduced serum-deprived fibroblast cultures more efficiently than oncoretroviral vectors and at rates comparable to those of lentiviral vectors. However, in these cultures FV vectors only transduced a subpopulation of proliferating cells, as determined by bromodeoxyuridine staining for DNA synthesis. In contrast to lentiviral vectors, FV vectors were unable to transduce human fibroblasts arrested by aphidicolin (G(1)/S phase) or gamma-irradiation (G(2) phase), and a partial cell cycle that included mitosis but not DNA synthesis was required. We could not determine if mitosis facilitated nuclear entry of FV vectors, since cell-free vector preparations contained long terminal repeat circles, precluding their use as nuclear markers. In contrast to oncoviral vectors, both FV and lentiviral vectors efficiently transduced G(0) fibroblasts that were later stimulated to divide. In the case of FV vectors, this was due to the persistence of a stable transduction intermediate in quiescent cells. Our findings support the use of FV vectors as a safe and effective alternative to lentiviral vectors for ex vivo transduction of stem cells that are quiescent during culture but divide following transplantation.     

State-of-the-art of the production of retroviral vectors

Retroviral vectors are still the vectors that are used in the majority of gene therapy trials for treatment of acquired or inherited diseases. In this review, the present state-of-the-art of the production of retroviral vectors and the most important parameters, such as the choice of the producer cell line, stability issues, medium additives, serum, type of bioreactor, that influence production issues is presented and discussed in light of an optimal vector production. The available literature data clearly indicate that, on one hand, the choice of the producer cell line is of utmost importance for obtaining a high level producer cell line, and that, on the other hand, the optimization of the medium, e.g. the replacement of glucose by fructose, has a potential for improving vector production rates and titers. Finally, the use of high-density perfusion culture systems for adherent as well as for suspension cells presents the best choice for a production system, because high cell densities imply high reactor specific production rates, which must be associated with a rapid harvest of the produced vector, thus avoiding vector inactivation due to an extended residence time. The overall optimization of the cultivation and production parameters will have a significant impact on the use of retroviral vectors for gene therapy purposes.     

Design and construction of targeted AAVP vectors for mammalian cell transduction

Bacteriophage (phage) evolved as bacterial viruses, but can be adapted to transduce mammalian cells through ligand-directed targeting to a specific receptor. We have recently reported a new generation of hybrid prokaryotic-eukaryotic vectors, which are chimeras of genetic cis-elements of recombinant adeno-associated virus and phage (termed AAVP). This protocol describes the design and construction of ligand-directed AAVP vectors, production of AAVP particles and the methodology to transduce mammalian cells in vitro and to target tissues in vivo after systemic administration. Targeted AAVP particles are made in a two-step process. First, a ligand peptide of choice is displayed on the coat protein to generate a targeted backbone phage vector. Then, a recombinant AAV carrying a mammalian transgene cassette is inserted into an intergenomic region. High-titer suspensions (approximately 10(10)-10(11) transducing units per microl) can be produced within 3 days after vector construction. Transgene expression by targeted AAVP usually reaches maximum levels within 1 week.