Practical guidelines for dual-color fluorescence cross-correlation spectroscopy

Dual-color fluorescence cross-correlation spectroscopy (FCCS) allows for the determination of molecular mobility and concentrations and for the quantitative analysis of molecular interactions such as binding or cleavage at very low concentrations. This protocol discusses considerations for preparing a biological system for FCCS experiments and offers practical advice for performing FCCS on a commercially available setup. Although FCCS is closely related to two-color confocal microscopy, critical adjustments and test measurements are necessary to establish successful FCCS measurements, which are described in a step-by-step manner. Moreover, we discuss control experiments for a negative cross-correlation artifact, arising from a lack of detection volume overlap, and a positive artifact, arising from cross-talk. FCCS has been applied to follow molecular interactions in solutions, on membranes and in cells and to analyze dynamic colocalization during intracellular transport. It is a technique that is expected to see new applications in various fields of biochemical and cell biological research.     

Cross-talk-free fluorescence cross-correlation spectroscopy by the switching method

Fluorescence cross-correlation spectroscopy (FCCS) is used as a powerful technique to analyze molecular interactions both in vitro and in vivo. This method basically requires two laser excitations for two target molecules labeled with fluorophores of different colors. Their coincidence in a microscopic detection volume is analyzed using two detectors. Any overlap of emission spectra of the two fluorophores, however, gives rise to false-positive data about their interaction. To overcome this problem, we have developed a new FCCS system, in which two excitation lasers are switched alternately by modulation using an acousto-optic tunable filter (AOTF). In this report, we demonstrate the feasibility of switching FCCS for enzymatic cleavage of proteins in living cells. A fusion protein of two fluorophores (EGFP and mRFP) with a cleavage site of caspase-3 inserted was expressed in HeLa cells, and proteolysis assay was performed during apoptotic cell death. Due to the absence of cross-talk signals, the FCCS measurement with the switching function gave a large change in relative cross-correlation amplitude after protein cleavage. Hence, switching FCCS enables more reliable measurement of molecular interactions than conventional FCCS.     

Homogeneous time-resolved G protein-coupled receptor–ligand binding assay based on fluorescence cross-correlation spectroscopy

G protein-coupled receptors (GPCRs) mediate many important physiological functions and are considered as one of the most successful therapeutic target classes for a wide spectrum of diseases. Drug discovery projects generally benefit from a broad range of experimental approaches for screening compound libraries and for the characterization of binding modes of drug candidates. Owing to the difficulties in solubilizing and purifying GPCRs, assay formats have been so far mainly limited to cell-based functional assays and radioligand binding assays. In this study, we used fluorescence cross-correlation spectroscopy (FCCS) to analyze the interaction of detergent-solubilized receptors to various types of GPCR ligands: endogenous peptides, small molecules, and a large surrogate antagonist represented by a blocking monoclonal antibody. Our work demonstrates the suitability of the homogeneous and time-resolved FCCS assay format for a robust, high-throughput determination of receptor–ligand binding affinities and kinetic rate constants for various therapeutically relevant GPCRs.     

Detection of prion protein immune complex for bovine spongiform encephalopathy diagnosis using fluorescence correlation spectroscopy and fluorescence cross-correlation spectroscopy

Fluorescence correlation spectroscopy (FCS) and fluorescence cross-correlation spectroscopy (FCCS) are powerful techniques to measure molecular interactions with high sensitivity in homogeneous solution and living cells. In this study, we developed methods for the detection of prion protein (PrP) using FCS and FCCS. A combination of a fluorescent-labeled Fab' fragment and another anti-PrP monoclonal antibody (mAb) enabled us to detect recombinant bovine PrP (rBoPrP) using FCS because there was a significant difference in the diffusion coefficients between the labeled Fab' fragment and the trimeric immune complex consisting of rBoPrP, labeled Fab' fragment, and another anti-PrP mAb. On the other hand, FCCS detected rBoPrP using two mAbs labeled with different fluorescence dyes. The detection limit for PrP in FCCS was approximately threefold higher than that in FCS. The sensitivity of FCCS in detection of abnormal isoform of PrP (PrP(Sc)) was comparable to that of enzyme-linked immunosorbent assay (ELISA). Because FCS and FCCS detect the PrP immune complex in homogeneous solution of only microliter samples with a single mixing step and without any washing steps, these features of measurement may facilitate automating bovine spongiform encephalopathy diagnosis.     

A fluorescent variant of a protein from the stony coral Montipora facilitates dual-color single-laser fluorescence cross-correlation spectroscopy

Dual-color fluorescence cross-correlation spectroscopy (FCCS) is a promising technique for quantifying protein-protein interactions. In this technique, two different fluorescent labels are excited and detected simultaneously within a common measurement volume. Difficulties in aligning two laser lines and emission crossover between the two fluorophores, however, make this technique complex. To overcome these limitations, we developed a fluorescent protein with a large Stokes shift. This protein, named Keima, absorbs and emits light maximally at 440 nm and 620 nm, respectively. Combining a monomeric version of Keima with cyan fluorescent protein allowed dual-color FCCS with a single 458-nm laser line and complete separation of the fluorescent protein emissions. This FCCS approach enabled sensitive detection of proteolysis by caspase-3 and the association of calmodulin with calmodulin-dependent enzymes. In addition, Keima and a spectral variant that emits maximally at 570 nm might facilitate simultaneous multicolor imaging with single-wavelength excitation.     

PCR-Free Detection of Genetically Modified Organisms Using Magnetic Capture Technology and Fluorescence Cross-Correlation Spectroscopy

The safety of genetically modified organisms (GMOs) has attracted much attention recently. Polymerase chain reaction (PCR) amplification is a common method used in the identification of GMOs. However, a major disadvantage of PCR is the potential amplification of non-target DNA, causing false-positive identification. Thus, there remains a need for a simple, reliable and ultrasensitive method to identify and quantify GMO in crops. This report is to introduce a magnetic bead-based PCR-free method for rapid detection of GMOs using dual-color fluorescence cross-correlation spectroscopy (FCCS). The cauliflower mosaic virus 35S (CaMV35S) promoter commonly used in transgenic products was targeted. CaMV35S target was captured by a biotin-labeled nucleic acid probe and then purified using streptavidin-coated magnetic beads through biotin-streptavidin linkage. The purified target DNA fragment was hybridized with two nucleic acid probes labeled respectively by Rhodamine Green and Cy5 dyes. Finally, FCCS was used to detect and quantify the target DNA fragment through simultaneously detecting the fluorescence emissions from the two dyes. In our study, GMOs in genetically engineered soybeans and tomatoes were detected, using the magnetic bead-based PCR-free FCCS method. A detection limit of 50 pM GMOs target was achieved and PCR-free detection of GMOs from 5 µg genomic DNA with magnetic capture technology was accomplished. Also, the accuracy of GMO determination by the FCCS method is verified by spectrophotometry at 260 nm using PCR amplified target DNA fragment from GM tomato. The new method is rapid and effective as demonstrated in our experiments and can be easily extended to high-throughput and automatic screening format. We believe that the new magnetic bead-assisted FCCS detection technique will be a useful tool for PCR-free GMOs identification and other specific nucleic acids.     

Characterization of the control catabolite protein of gluconeogenic genes repressor by fluorescence cross-correlation spectroscopy and other biophysical approaches

Determination of the physical parameters underlying protein-DNA interactions is crucial for understanding the regulation of gene expression. In particular, knowledge of the stoichiometry of the complexes is a prerequisite to determining their energetics and functional molecular mechanisms. However, the experimental determination of protein-DNA complex stoichiometries remains challenging. We used fluorescence cross-correlation spectroscopy (FCCS) to investigate the interactions of the control catabolite protein of gluconeogenic genes, a key metabolic regulator in Gram-positive bacteria, with two oligonucleotides derived from its target operator sequences, gapB and pckA. According to our FCCS experiments, the stoichiometry of binding is twofold larger for the pckA target than for gapB. Correcting the FCCS data for protein self-association indicated that control catabolite protein of gluconeogenic genes forms dimeric complexes on the gapB target and tetrameric complexes on the pckA target. Analytical ultracentrifugation coupled with fluorescence anisotropy and hydrodynamic modeling allowed unambiguous confirmation of this result. The use of multiple complementary techniques to characterize these complexes should be employed wherever possible. However, there are cases in which analytical ultracentrifugation is precluded, due to protein stability, solubility, or availability, or, more obviously, when the studies are carried out in live cells. If information concerning the self-association of the protein is available, FCCS can be used for the direct and simultaneous determination of the affinity, cooperativity, and stoichiometry of protein-DNA complexes in a concentration range and conditions relevant to the regulation of these interactions.     

Toward the detection of single virus particle in serum

There is a grand challenge for the detection of target molecules at single molecule sensitivity in a bulk body fluid for the early diagnosis of diseases. We report our progress on tackling this challenge via the combination of fluorescence cross-correlation spectroscopy (FCCS) and micro fabricated devices toward highly sensitive detection of the dengue virus. We demonstrate that by using a dengue-specific antibody, we can probe the individual dengue virus in a nanomolar bulk solution by following the specific association of dengue antibody using FCCS. Consequently, we designed and fabricated a microfluidic chamber array structure and were able to compartmentalize the bulk aqueous dengue sample into femtoliter volumes using such a device. More importantly we demonstrate that we can differentiate between the compartments containing the dengue virus and the virus-free compartments. Our experiment suggests that by expanding the throughput using microfluidic devices integrated with FCCS, both of which can be achieved practically, we should be able to detect single virus particle in human body fluids in the near future.     

Cross talk free fluorescence cross correlation spectroscopy in live cells

Fluorescence correlation spectroscopy (FCS) is now a widely used technique to measure small ensembles of labeled biomolecules with single molecule detection sensitivity (e.g., low endogenous concentrations). Fluorescence cross correlation spectroscopy (FCCS) is a derivative of this technique that detects the synchronous movement of two biomolecules with different fluorescence labels. Both methods can be applied to live cells and, therefore, can be used to address a variety of unsolved questions in cell biology. Applications of FCCS with autofluorescent proteins (AFPs) have been hampered so far by cross talk between the detector channels due to the large spectral overlap of the fluorophores. Here we present a new method that combines advantages of these techniques to analyze binding behavior of proteins in live cells. To achieve this, we have used dual color excitation of a common pair of AFPs, ECFP and EYFP, being discriminated in excitation rather than in emission. This is made possible by pulsed excitation and detection on a shorter timescale compared to the average residence time of particles in the FCS volume element. By this technique we were able to eliminate cross talk in the detector channels and obtain an undisturbed cross correlation signal. The setup was tested with ECFP/EYFP lysates as well as chimeras as negative and positive controls and demonstrated to work in live HeLa cells coexpressing the two fusion proteins ECFP-connexin and EYFP-connexin.     

Direct detection of caspase-3 activation in single live cells by cross-correlation analysis

Dual color fluorescence cross-correlation spectroscopy (FCCS) provides information about the coincidence of spectrally well-defined two fluorescent molecules in a small observation area at the single-molecule level. To evaluate the activity of caspase-3 in vivo directly, FCCS was applied to single live cells. We constructed chimeric proteins that consisted of tandemly fused enhanced green FP (EGFP) and monomeric red FP (mRFP). In control experiments, the protease reaction was monitored in solution, where a decrease in cross-correlation amplitude was observed due to specific cleavage of the amino acid sequence between EGFP and mRFP. Moreover, a decrease in cross-correlation amplitude could be detected in a live cell, where caspase-3 activation was induced by apoptosis. This is the first report of FP-based in vivo cross-correlation analysis. FP-based FCCS may become the most versatile method for analysis of protein-protein interactions in live cells.     

Fluorescence cross-correlation spectroscopy in living cells

Cell biologists strive to characterize molecular interactions directly in the intracellular environment. The intrinsic resolution of optical microscopy, however, allows visualization of only coarse subcellular localization. By extracting information from molecular dynamics, fluorescence cross-correlation spectroscopy (FCCS) grants access to processes on a molecular scale, such as diffusion, binding, enzymatic reactions and codiffusion, and has become a valuable tool for studies in living cells. Here we review basic principles of FCCS and focus on seminal applications, including examples of intracellular signaling and trafficking. We consider FCCS in the context of fluorescence resonance energy transfer and multicolor imaging techniques and discuss application strategies and recent technical advances.     

Escherichia coli ribosomal protein L20 binds as a single monomer to its own mRNA bearing two potential binding sites

Ribosomal protein L20 is crucial for the assembly of the large ribosomal subunit and represses the translation of its own mRNA. L20 mRNA carries two L20-binding sites, the first folding into a pseudoknot and the second into an imperfect stem and loop. These two sites and the L20-binding site on 23S ribosomal RNA are recognized similarly using a single RNA-binding site located on one face of L20. In this work, using gel filtration and fluorescence cross-correlation spectroscopy (FCCS) experiments, we first exclude the possibility that L20 forms a dimer, which would allow each monomer to bind one site of the mRNA. Secondly we show, using affinity purification and FCCS experiments, that only one molecule of L20 binds to the L20 mRNA despite the presence of two potential binding sites. Thirdly, using RNA chemical probing, we show that the two L20-binding sites are in interaction. This interaction provides an explanation for the single occupancy of the mRNA. The two interacting sites could form a single hybrid site or the binding of L20 to a first site may inhibit binding to the second. Models of regulation compatible with our data are discussed.     

Pulsed interleaved excitation

In this article, we demonstrate the new method of pulsed interleaved excitation (PIE), which can be used to extend the capabilities of multiple-color fluorescence imaging, fluorescence cross-correlation spectroscopy (FCCS), and single-pair fluorescence resonance energy transfer (spFRET) measurements. In PIE, multiple excitation sources are interleaved such that the fluorescence emission generated from one pulse is complete before the next excitation pulse arrives. Hence, the excitation source for each detected photon is known. Typical repetition rates used for PIE are between approximately 1 and 50 MHz. PIE has many applications in various fluorescence methods. Using PIE, dual-color measurements can be performed with a single detector. In fluorescence imaging with multicolor detection, spectral cross talk can be removed, improving the contrast of the image. Using PIE with FCCS, we can eliminate spectral cross talk, making the method sensitive to weaker interactions. FCCS measurements with complexes that undergo FRET can be analyzed quantitatively. Under specific conditions, the FRET efficiency can be determined directly from the amplitude of the measured correlation functions without any calibration factors. We also show the application of PIE to spFRET measurements, where complexes that have low FRET efficiency can be distinguished from those that do not have an active acceptor.     

Factors affecting the quantification of biomolecular interactions by fluorescence cross-correlation spectroscopy

Fluorescence cross-correlation spectroscopy (FCCS) is used to determine interactions and dissociation constants (K_ds) of biomolecules. The determination of a K_d depends on the accurate measurement of the auto- and cross-correlation function (ACF and CCF) amplitudes. In the case of complete binding, the ratio of the CCF/ACF amplitudes is expected to be 1. However, measurements performed on tandem fluorescent proteins (FPs), in which two different FPs are linked, yield CCF/ACF amplitude ratios of ～0.5 or less for different FCCS schemes. We use single wavelength FCCS and pulsed interleaved excitation FCCS to measure various tandem FPs constituted of different red and green FPs and determine the causes for this suboptimal ratio. The main causes for the reduced CCF/ACF amplitude ratio are differences in observation volumes for the different labels, the existence of dark FPs due to maturation problems, photobleaching, and to a lesser extent Förster (or fluorescence) resonance energy transfer between the labels. We deduce the fraction of nonfluorescent proteins for EGFP, mRFP, and mCherry as well as the differences in observation volumes. We use this information to correct FCCS measurements of the interaction of Cdc42, a small Rho-GTPase, with its effector IQGAP1 in live cell measurements to obtain a label-independent value for the K_d.     

Applications of dual-color fluorescence cross-correlation spectroscopy in antibody binding studies

Two-photon dual-color fluorescence cross-correlation spectroscopy (DC-FCCS) was applied to study the binding interactions of monoclonal antibodies (mAbs) and protein antigens. We measured the binding constant of the interaction of a 32-amino acid brain natriuretic peptide (BNP) with a mAbs and demonstrated the utility of DC-FCCS in studies of antibody sandwiches, trimolecular formations, where two different antibodies bind the same antigen simultaneously. We also show the use of DC-FCCS for monitoring competitive displacement of the labeled antibody in antibody-antigen complexes and subsequent determination of the pertinent dissociation rate (off-rate). The off-rate measurements were performed for two mAbs toward tissue inhibitor 1 of metalloproteinases (TIMP-1). From a methodological perspective, selection of the best labeling protocols and careful optimization of the FCCS instrumentation are essential to achieve the highest cross-correlation signal. When working in vitro, it is practical to generate a complete binding curve using the normalized cross-correlation signal and then fit the experimental points to a binding model. DC-FCCS offers the sensitivity and all other advantages of a solution phase fluorescence-based technique. For systems containing proteins of a similar size that interact without substantial changes in the fluorescence intensity, DC-FCCS serves as a preferred means of measuring solution phase binding constants.     

The ProteinChip Biomarker System from Ciphergen Biosystems: a novel proteomics platform for rapid biomarker discovery and validation

Protein biochips are emerging in two distinct formats. The first involves high-density immobilized arrays of recognition molecules (e.g. antibodies), where target binding is monitored indirectly (e.g. via fluorescence). This technology is in its infancy, being limited by the availability of suitable binding molecules that can cope effectively with protein diversity. The second format involves the capture of proteins by biochemical or intermolecular interaction, coupled with direct detection by MS. This technology is available as the ProteinChip Biomarker System. ProteinChip technology uses surface-enhanced laser desorption/ionization processes to analyse proteins directly from biological samples. Chromatographic surfaces are placed on to ProteinChip Arrays and used to capture subclasses of proteins, dependent on their physical properties. Time-of-flight MS then assigns native molecular masses to the captured proteins. Reproducible protein profiles can be generated from crude biological fluids (e.g. cell lysates, urine or serum). The technology is being applied to a wide range of disciplines, from plant sciences to cancer research, and will be reviewed here.     

Fluorescence correlation spectroscopy for ultrasensitive DNA analysis in continuous flow capillary electrophoresis

Continuous flow capillary electrophoresis (CFCE) is non-separations based analytical technique based on the free solution electrophoretic mobility of biological molecules such as DNA, RNA, peptides, and proteins. The electrophoretic mobilities and translational diffusion constants of the analyte molecules are determined using single molecule detection methods, including fluorescence correlation spectroscopy (FCS). CFCE is used to resolve multiple components in a mixture of analytes, measure electrophoretic mobility shifts due to binding interactions, and study the hydrodynamic and electrostatic properties of biological molecules in solution. Often this information is obtained with greater speed and sensitivity than conventational separations-based capillary-zone electrophoresis. This paper will focus on the application of two-beam fluorescence cross-correlation spectroscopy as a versatile detection method for CFCE and explore several applications to the study of the solution properties of single-stranded DNA.     

Ultrasensitive staining-free protein detection after PAA gel electrophoresis using deep UV fluorescence

We present the observation of separated protein bands after polyacrylamide (PAA) gel electrophoresis based on the staining-free detection of their ultra violet (UV)-induced fluorescence employing deep UV confocal fluorescence microscopy. Mixtures of the three biological compounds beta-Galactosidase (from Escherichia coli), apo-Transferrin (bovine) and bovine serum albumin (BSA) have been separated and a staining free detection limit below 80 pg (7.0 x 10(8) molecules) per band has been achieved. This corresponds to approximately 270 molecules in the detection volume for confocal microscopy.