Features of the structural organization of inactivated actin--an intermediate form of the protein during the folding-unfolding process

The structure of inactivated actin was studied by the methods of intrinsic fluorescence upon stationary and pulse excitation, selective fluorescence quenching with acrylamide, and testing the protein surface with a hydrophobic probe, 8-anilino-1-naphthalenesulfonic acid (ANS). The results are discussed along with earlier data on actin sedimentation, near- and far-UV CD spectra, and fluorescence anisotropy. The thermodynamic stability of inactivated actin, the presence of a secondary structure characteristic of the native protein, and the reversibility of the inactivated actin-completely unfolded actin transition allow inactivated actin to be considered an intermediate form in the process of protein folding into the native globular structure. In vitro actin inactivation is accompanied by specific association of actin macromolecules resulting in the formation of homogeneous stable complexes. The tendency toward aggregation (or specific association, in the case of actin), which is determined by the presence of extended hydrophobic clusters on the molecule surface, appears to be one of the intrinsic properties of any protein in the intermediate state. The mobility of the amino acid side chains in the inactivated actin differs considerably from that in the completely unfolded actin. The relaxation properties of the microenvironment of tryptophan residues determine relatively long-wave fluorescence spectra of the inactivated actin. However, the mobility observed is insufficient to compensate the asymmetry of the microenvironment of aromatic residues, which is confirmed by a characteristic and intense CD spectrum in the near-UV region. The mobility of the indole rings of tryptophans located in the internal regions of the inactivated actin that are solvent-inaccessible although polar is even considerably lower than that in the native actin.     

Changes in the organization of the actin cytoskeleton during preimplantation development of the pig embryo

The organization of the actin cytoskeleton was studied in unfertilized porcine oocytes and preimplantation stage embryos from Day 1 through Day 8 of development. Fixed and detergent-extracted oocytes and embryos were analyzed by fluorescence microscopy after staining with either rhodamine-phalloidin to localize filamentous actin or with affinity-purified anti-actin antibodies to localize the total immunodetectable actin. Whereas unfertilized oocytes contain immunoreactive cytoplasmic actin, rhodamine-phalloidin binding is not detected until fertilization when a prominent cortical staining pattern becomes apparent. In early cleavage stage embryos, filamentous actin is concentrated in the cell cortex of blastomeres especially at sites of cell-cell contact. Compacting morulae exhibit a marked accumulation of actin at the margins of blastomeres where numerous interdigitating cell processes are located. The predominantly pericellular distribution of actin becomes a distinguishing feature of trophectodermal cells in the expanding blastocyst at Day 6 of development; these cells form a prominent actin-limited zone circumscribing the inner cell mass. In Day 8 blastocysts, three cell types are present that are readily distinguishable based upon their actin displays among other cytological features. Trophectodermal cells exhibit continuous actin-rich lateral borders and stress fibers along their basal surface. Inner cell mass cells contain a discontinuous actin boundary and prominent foci of actin along their blastocoelic surface. Lining the blastocoel are patches of endodermal cells in which the actin is exclusively cortical. The data are discussed with respect to differences between species and the chronology of actin rearrangements during preimplantation development of the porcine embryo.     

Properties of the interaction between phosphofructokinase and actin

The interaction of rabbit skeletal muscle phosphofructokinase (PFK) with actin is characterized in terms of the binding of PFK to actin in the presence and absence of tropomyosin and troponin, the effect of PFK on actin polymerization, and the involvement of adenylates in the binding of PFK to actin. The thin filament proteins, tropomyosin and troponin, are associated with skeletal muscle actin and reduce the binding of PFK to actin, thus influencing the probable distribution of PFK in skeletal muscle. The binding of PFK to actin is inhibited by ATP and ADP but not by fructose 6-phosphate or fructose 2,6-bisphosphate. This specific inhibition, plus evidence from fluorescence quenching and photoaffinity labeling, suggests that actin binds at the adenosine activation sites of PFK. Light scattering measurements used to monitor actin polymerization indicate that PFK dramatically increases the level of light scattering produced by the polymerization of actin, indicative of a superaggregate of PFK and actin. PFK inhibits the polymerization of actin when polymerization is induced by low concentrations of added salts. Although PFK binds to actin with high affinity, it seems to have little effect on the high shear viscosity of actin filaments.     

Immunochemical evidence for the binding of caldesmon to the NH2-terminal segment of actin

The binding of caldesmon and its actin-binding fragments to actin was studied by using peptide antibodies directed against two actin sites implicated in actomyosin interactions. Antibodies against residues 1-7 on skeletal alpha-actin strongly inhibited the binding of caldesmon to actin and perturbed to a smaller extent the interaction between actin and the actin binding fragments. Carbodiimide coupling of ethylenediamine to the NH2-terminal acidic residues on actin inhibited the binding of caldesmon and its fragments to actin to a similar extent as the (residues 1-7) antibodies. Antibodies against residues 18-28 showed only limited competition with caldesmon for the binding to actin. These results lead to the following conclusions. (i) The NH2-terminal residues on actin play an important role in the binding of caldesmon to actin, (ii) residues 18-28 on actin do not form a major caldesmon interaction site, and (iii) the actin-binding fragments do not contain the full actin-binding interface. These conclusions and other literature data suggest that caldesmon regulates the actomyosin ATPase by competing with myosin.ATP for the NH2-terminal segment on actin.     

Mechanism of the interaction of human platelet profilin with actin

We have reexamined the interaction of purified platelet profilin with actin and present evidence that simple sequestration of actin monomers in a 1:1 complex with profilin cannot explain many of the effects of profilin on actin assembly. Three different methods to assess binding of profilin to actin show that the complex with platelet actin has a dissociation constant in the range of 1 to 5 microM. The value for muscle actin is similar. When bound to actin, profilin increases the rate constant for dissociation of ATP from actin by 1,000-fold and also increases the rate of dissociation of Ca2+ bound to actin. Kinetic simulation showed that the profilin exchanges between actin monomers on a subsecond time scale that allows it to catalyze nucleotide exchange. On the other hand, polymerization assays give disparate results that are inconsistent with the binding assays and each other: profilin has different effects on elongation at the two ends of actin filaments; profilin inhibits the elongation of platelet actin much more strongly than muscle actin; and simple formation of 1:1 complexes of actin with profilin cannot account for the strong inhibition of spontaneous polymerization. We suggest that the in vitro effects on actin polymerization may be explained by a complex mechanism that includes weak capping of filament ends and catalytic poisoning of nucleation. Although platelets contain only 1 profilin for every 5-10 actin molecules, these complex reactions may allow substoichiometric profilin to have an important influence on actin assembly. We also confirm the observation of I. Lassing and U. Lindberg (1985. Nature [Lond.] 318:472-474) that polyphosphoinositides inhibit the effects of profilin on actin polymerization, so lipid metabolism must also be taken into account when considering the functions of profilin in a cell.     

Thiol oxidation of actin produces dimers that enhance the elasticity of the F-actin network

Slow oxidation of sulfhydryls, forming covalently linked actin dimers and higher oligomers, accounts for increases in the shear elasticity of purified actin observed after aging. Disulfide-bonded actin dimers are incorporated into F-actin during polymerization and generate cross-links between actin filaments. The large gel strength of oxidized actin (>100 Pa for 1 mg/ml) in the absence of cross-linking proteins falls to within the theoretically predicted order of magnitude for uncross-linked actin filament networks (1 Pa) with the addition of sufficient concentrations of reducing agents such as 5 mM dithiothreitol or 10 mM beta-mercaptoethanol. As little as 1 gelsolin/1000 actin subunits also lowers the high storage modulus of oxidized actin. The effects of gelsolin may be both to increase filament number as it severs F-actin and to cover the barbed end of an actin filament, which otherwise might cross-link to the side of another filament via an actin dimer. These new findings may explain why previous studies of actin rheology report a wide range of values when purified actin is polymerized without added regulatory proteins.     

Disruption of the single tropomyosin gene in yeast results in the disappearance of actin cables from the cytoskeleton

The yeast tropomyosin gene, designated TPM1, is present in a single copy per haploid genome and encodes a protein with a predicted molecular weight of 23.5 kd. The protein sequence is homologous to higher cell tropomyosins, including the characteristic hydrophobic-hydrophilic pseudoheptapeptide repeats. Indirect immunofluorescence microscopy reveals that tropomyosin is localized with actin cables in wild-type cells. Disruption of TPM1 is not lethal, but results in a reduced growth rate and disappearance of actin cables. Strains carrying the conditional actin mutation act1-2 also lack actin cables; overexpression of tropomyosin in these strains partially restores actin cables. These results strongly suggest that tropomyosin interacts with F actin in vivo and may play an important role in assembling or stabilizing actin cables in yeast.     

ADP-ribosylated actin caps the barbed ends of actin filaments

The mode of action on actin polymerization of skeletal muscle actin ADP-ribosylated on arginine 177 by perfringens iota toxin was investigated. ADP-ribosylated actin decreased the rate of nucleated actin polymerization at substoichiometric ratios of ADP-ribosylated actin to monomeric actin. ADP-ribosylated actin did not tend to copolymerize with actin. Actin filaments were depolymerized by the addition of ADP-ribosylated actin. The maximal monomer concentration reached by addition of ADP-ribosylated actin was similar to the critical concentration of the pointed ends of actin filaments. ADP-ribosylated actin had no effect on the rate of polymerization of gelsolin-capped actin filaments which polymerize at the pointed ends. The results suggest that ADP-ribosylated actin acts as a capping protein which binds to the barbed ends of actin filaments to inhibit polymerization. Based on an analysis of the depolymerizing effect of ADP-ribosylated actin, the equilibrium constant for binding of ADP-ribosylated actin to the barbed ends of actin filaments was determined to be about 10(8) M-1. As actin is ADP-ribosylated by perfringens iota toxin and by botulinum C2 toxin, it appears that conversion of actin into a capping protein by ADP-ribosylation is a pathophysiological reaction catalyzed by bacterial toxins which ultimately leads to inhibition of actin assembly.     

Live cell imaging of the assembly, disassembly, and actin cable-dependent movement of endosomes and actin patches in the budding yeast, Saccharomyces cerevisiae

Using FM4-64 to label endosomes and Abp1p-GFP or Sac6p-GFP to label actin patches, we find that (1) endosomes colocalize with actin patches as they assemble at the bud cortex; (2) endosomes colocalize with actin patches as they undergo linear, retrograde movement from buds toward mother cells; and (3) actin patches interact with and disassemble at FM4-64–labeled internal compartments. We also show that retrograde flow of actin cables mediates retrograde actin patch movement. An Arp2/3 complex mutation decreases the frequency of cortical, nonlinear actin patch movements, but has no effect on the velocity of linear, retrograde actin patch movement. Rather, linear actin patch movement occurs at the same velocity and direction as the movement of actin cables. Moreover, actin patches require actin cables for retrograde movements and colocalize with actin cables as they undergo retrograde movement. Our studies support a mechanism whereby actin cables serve as “conveyor belts” for retrograde movement and delivery of actin patches/endosomes to FM4-64–labeled internal compartments.     

Structure of an F-actin trimer disrupted by gelsolin and implications for the mechanism of severing

Stable oligomers of filamentous actin were obtained by cross-linking F-actin with 1,4-N,N'-phenylenedimaleimide and depolymerization with excess segment-1 of gelsolin. Segment-1-bound and cross-linked actin oligomers containing either two or three actin subunits were purified and shown to nucleate actin assembly. Kinetic assembly data from mixtures of monomeric actin and the actin oligomers fit a nucleation model where cross-linked actin dimer or trimer reacts with an actin monomer to produce a competent nucleus for filament assembly. We report the three-dimensional structure of the segment-1-actin hexamer containing three actin subunits, each with a tightly bound ATP. Comparative analysis of this structure with twelve other actin structures provides an atomic level explanation for the preferential binding of ATP by the segment-1-complexed actin. Although the structure of segment-1-bound actin trimer is topologically similar to the helical model of F-actin (1), it has a distorted symmetry compared with that of the helical model. This distortion results from intercalation of segment-1 between actin protomers that increase the rise per subunit and rotate each of the actin subunits relative to their positions in F-actin. We also show that segment-1 of gelsolin is able to sever actin filaments, although the severing activity of segment-1 is significantly lower than full-length gelsolin.     

Spectrin promotes the association of F-actin with the cytoplasmic surface of the human erythrocyte membrane

We studied the binding of actin to the erythrocyte membrane by a novel application of falling ball viscometry. Our approach is based on the notion that if membranes have multiple binding sites for F-actin they will be able to cross-link and increase the viscosity of actin. Spectrin- and actin-depleted inside-out vesicles reconstituted with purified spectrin dimer or tetramer induce large increases in the viscosity of actin. Comparable concentrations of spectrin alone, inside-out vesicles alone, inside-out vesicles plus heat-denatured spectrin dimmer or tetramer induce large increases in the viscosity of actin. Comparable concentrations of spectrin alone, inside-out vesicles alone, inside-out plus heat denatured spectrin, ghosts, or ghosts plus spectrin have no effect on the viscosity of actin. Centrifugation experiments show that the amount of actin bound to the inside-out vesicles is enhanced in the presence of spectrin. The interactions detected by low-shear viscometry reflect actin interaction with membrane- bound spectrin because (a) prior removal of band 4.1 and ankyrin (band 2.1, the high- affinity membrane attachment site for spectrin) reduces both spectrin binding to the inside-out vesicles and their capacity to stimulate increase in viscosity of actin in the presence of spectrin + actin are inhibited by the addition of the water-soluble 72,000- dalton fragment of ankyrin, which is known to inhibit spectrin reassociation to the membrane. The increases in viscosity of actin induced by inside-out vesicles reconstituted with purified spectrin dimer or tetramer are not observed when samples are incubated at 0 degrees C. This temperature dependence may be related to the temperature-dependent associations we observe in solution studies with purified proteins: addition of ankyrin inhibits actin cross-linking by spectrin tetramer plus band 4.1 at 0 degrees C, and enhances it at 32 degrees C. We conclude (a) that falling ball viscometry can be used to assay actin binding to membranes and (b) that spectrin is involved in attaching actin filaments or oligomers to the cytoplasmic surface of the erythrocyte membrane.     

Dynamics of the muscle thin filament regulatory switch: the size of the cooperative unit.

Actin thin filaments containing bound tropomyosin (Tm) or tropomyosin troponin (Tm.Tn) exist in two states ("off" and "on") with different affinities for myosin heads (S1), which results in the cooperative binding of S1. The rate of S1 binding to, and dissociating from, actin, Tm.actin, and Tm.Tn.actin, monitored by light scattering (LS), was compared with the rate of change in state, monitored by the excimer fluorescence (Fl) of a pyrene label attached to Tm. The ATP-induced S1 dissociation showed similar exponential decreases in LS for actin.S1, Tm.actin.S1, and Tm.Tn.actin.S1 +/- Ca2+. The Fl change, however, showed a delay that was greater for Tm.Tn.actin than Tm.actin, independent of Ca2+. The S1 binding kinetics gave observed rate constants for the S1-induced change in state that were 5-6 times the observed rate constants of S1 binding to Tm.actin, which were increased to 10-12 for Tm.Tn.actin, independent of Ca2+. The rate of the Fl signals showed that the on/off states were in rapid equilibrium. These data indicate that the apparent cooperative unit for Tm.actin is 5-6 actin subunits rather than the minimum structural unit size of 7, and is increased to 10-12 subunits for Tm.Tn.actin, independent of the presence of Ca2+. Thus, Tm appears semi-flexible, and Tn increases communication between neighboring structural units. A general model for the dynamic transitions involved in muscle regulation is presented.     

Effect of the state of oxidation of cysteine 190 of tropomyosin on the assembly of the actin-tropomyosin complex

Tropomyosin, cross-linked at cysteine 190, was found to bind more weakly to actin filaments than uncross-linked tropomyosin. Cross-linking of tropomyosin can cause actin filaments nearly completely covered with tropomyosin to be uncovered almost completely. The critical monomer concentration of actin is not significantly changed by binding of cross-linked or uncross-linked tropomyosin to actin filaments. The binding curves were analyzed quantitatively, thereby taking into account the polar end-to-end contact of tropomyosin molecules bound by actin and the overlap of the seven subunit binding sites along the actin filament. Under the conditions of the experiment (80 mM KCl, 1 mM MgCl2, pH 7.5, 38-42 degrees C), the equilibrium constant for isolated binding of tropomyosin to actin filaments is in the range 1 x 10(3)-3 x 10(3) M-1. The equilibrium constants for binding of tropomyosin to binding sites along the actin filament with one or two neighbouring tropomyosin molecules are in the range of 10(6) or 10(8) to 10(9) M-1, respectively. The equilibrium constants for binding of tropomyosin to binding sites along the actin filament with one or two neighbouring tropomyosin molecules are in the range of 10(6) or 10(8) to 10(9) M-1, respectively. The equilibrium constants for cross-linked and uncross-linked tropomyosin differ by a factor of only about two. Owing to the highly cooperative binding, these differences are sufficient so that actin filaments nearly completely covered with uncross-linked tropomyosin are uncovered almost completely by cross-linking tropomyosin at cysteine 190.     

Ultrastructure of the yeast actin cytoskeleton and its association with the plasma membrane

We characterized the yeast actin cytoskeleton at the ultrastructural level using immunoelectron microscopy. Anti-actin antibodies primarily labeled dense, patchlike cortical structures and cytoplasmic cables. This localization recapitulates results obtained with immunofluorescence light microscopy, but at much higher resolution. Immuno-EM double-labeling experiments were conducted with antibodies to actin together with antibodies to the actin binding proteins Abp1p and cofilin. As expected from immunofluorescence experiments, Abp1p, cofilin, and actin colocalized in immuno-EM to the dense patchlike structures but not to the cables. In this way, we can unambiguously identify the patches as the cortical actin cytoskeleton. The cortical actin patches were observed to be associated with the cell surface via an invagination of plasma membrane. This novel cortical cytoskeleton- plasma membrane interface appears to consist of a fingerlike invagination of plasma membrane around which actin filaments and actin binding proteins are organized. We propose a possible role for this unique cortical structure in wall growth and osmotic regulation.     

Human spire interacts with the barbed end of the actin filament

Spire is an actin nucleator that initiates actin polymerization at a specific place in the cell. Similar to the Arp2/3 complex, spire was initially considered to bind to the pointed end of the actin filament when it generates a new actin filament. Subsequently, spire was reported to be associated with the barbed end (B-end); thus, there is still no consensus regarding the end with which spire interacts. Here, we report direct evidence that spire binds to the B-end of the actin filament, under conditions where spire accelerates actin polymerization. Using electron microscopy, we visualized the location of spire bound to the filament by gold nanoparticle labeling of the histidine-tagged spire, and the polarity of the actin filament was determined by image analysis. In addition, our results suggest that multiple spires, linked through one gold nanoparticle, enhance the acceleration of actin polymerization. The B-end binding of spire provides the basis for understanding its functional mechanism in the cell.     

Divergent regulation of the sarcomere and the cytoskeleton

The existence of a feedback mechanism regulating the precise amounts of muscle structural proteins, such as actin and the actin-associated protein tropomyosin (Tm), in the sarcomeres of striated muscles is well established. However, the regulation of nonmuscle or cytoskeletal actin and Tms in nonmuscle cell structures has not been elucidated. Unlike the thin filaments of striated muscles, the actin cytoskeleton in nonmuscle cells is intrinsically dynamic. Given the differing requirements for the structural integrity of the actin thin filaments of the sarcomere compared with the requirement for dynamicity of the actin cytoskeleton in nonmuscle cells, we postulated that different regulatory mechanisms govern the expression of sarcomeric versus cytoskeletal Tms, as key regulators of the properties of the actin cytoskeleton. Comprehensive analyses of tissues from transgenic and knock-out mouse lines that overexpress the cytoskeletal Tms, Tm3 and Tm5NM1, and a comparison with sarcomeric Tms provide evidence for this. Moreover, we show that overexpression of a cytoskeletal Tm drives the amount of filamentous actin.     

Effects of latrunculin B on the actin cytoskeleton and hyphal growth in Phytophthora infestans

The actin cytoskeleton is conserved in all eukaryotes, but its functions vary among different organisms. In oomycetes, the function of the actin cytoskeleton has received relatively little attention. We have performed a bioinformatics study and show that oomycete actin genes fall within a distinct clade that is divergent from plant, fungal and vertebrate actin genes. To obtain a better understanding of the functions of the actin cytoskeleton in hyphal growth of oomycetes, we studied the actin organization in Phytophthora infestans hyphae and the consequences of treatment with the actin depolymerising drug latrunculin B (latB). This revealed that latB treatment causes a concentration dependent inhibition of colony expansion and aberrant hyphal growth. The most obvious aberrations observed upon treatment with 0.1 μM latB were increased hyphal branching and irregular tube diameters whereas at higher concentrations latB (0.5 and 1 μM) tips of expanding hyphae changed into balloon-like shapes. This aberrant growth correlated with changes in the organization of the actin cytoskeleton. In untreated hyphae, staining with fluorescently tagged phalloidin revealed two populations of actin filaments: long, axially oriented actin filament cables and cortical actin filament plaques. Two hyphal subtypes were recognized, one containing only plaques and the other containing both cables and plaques. In the latter, some hyphae had an apical zone without actin filament plaques. Upon latB treatment, the proportion of hyphae without actin filament cables increased and there were more hyphae with a short apical zone without actin filament plaques. In general, actin filament plaques were more resilient against actin depolymerisation than actin filament cables. Besides disturbing hyphal growth and actin organization, actin depolymerisation also affected the positioning of nuclei. In the presence of latB, the distance between nuclei and the hyphal tip decreased, suggesting that the actin cytoskeleton plays a role in preventing the movement of nuclei towards the hyphal tip.     

Chlamydia trachomatis Tarp cooperates with the Arp2/3 complex to increase the rate of actin polymerization

Actin polymerization is required for Chlamydia trachomatis entry into nonphagocytic host cells. Host and chlamydial actin nucleators are essential for internalization of chlamydiae by eukaryotic cells. The host cell Arp2/3 complex and the chlamydial translocated actin recruiting phosphoprotein (Tarp) are both required for entry. Tarp and the Arp2/3 complex exhibit unique actin polymerization kinetics individually, but the molecular details of how these two actin nucleators cooperate to promote bacterial entry is not understood. In this study we provide biochemical evidence that the two actin nucleators act synergistically by co-opting the unique attributes of each to enhance the dynamics of actin filament formation. This process is independent of Tarp phosphorylation. We further demonstrate that Tarp colocalization with actin filaments is independent of the Tarp phosphorylation domain. The results are consistent with a model in which chlamydial and host cell actin nucleators cooperate to increase the rate of actin filament formation.