Crystal structures of a meta-cleavage product hydrolase from Pseudomonas fluorescens IP01 (CumD) complexed with cleavage products

2-Hydroxy-6-oxo-7-methylocta-2,4-dienoate hydrolase (CumD) from Pseudomonas fluorescens IP01 hydrolyzes a meta-cleavage product generated in the cumene (isopropylbenzene) degradation pathway. The crystal structures of the inactive S103A mutant of the CumD enzyme complexed with isobutyrate and acetate ions were determined at 1.6 and 2.0 A resolution, respectively. The isobutyrate and acetate ions were located at the same position in the active site, and occupied the site for a part of the hydrolysis product with CumD, which has the key determinant group for the substrate specificity of related hydrolases. One of the oxygen atoms of the carboxyl group of the isobutyrate ion was hydrogen bonded with a water molecule and His252. Another oxygen atom of the carboxyl group was situated in an oxyanion hole formed by the two main-chain N atoms. The isopropyl group of the isobutyric acid was recognized by the side-chains of the hydrophobic residues. The substrate-binding pocket of CumD was long, and the inhibition constants of various organic acids corresponded well to it. In comparison with the structure of BphD from Rhodococcus sp. RHA1, the structural basis for the substrate specificity of related hydrolases, is revealed.     

A series of crystal structures of a meta-cleavage product hydrolase from Pseudomonas fluorescens IP01 (CumD) complexed with various cleavage products

Meta-cleavage product hydrolase (MCP-hydrolase) is one of the key enzymes in the microbial degradation of aromatic compounds. MCP-hydrolase produces 2-hydroxypenta-2,4-dienoate and various organic acids, according to the C6 substituent of the substrate. Comprehensive analysis of the substrate specificity of the MCP-hydrolase from Pseudomonas fluorescens IP01 (CumD) was carried out by determining the kinetic parameters for nine substrates and crystal structures complexed with eight cleavage products. CumD preferred substrates with long non-branched C6 substituents, but did not effectively hydrolyze a substrate with a phenyl group. Superimposition of the complex structures indicated that benzoate was bound in a significantly different direction than other aliphatic cleavage products. The directions of the bound organic acids appeared to be related with the k(cat) values of the corresponding substrates. The Ile139 and Trp143 residues on helix alpha4 appeared to cause steric hindrance with the aromatic ring of the substrate, which hampers base-catalyzed attack by water.     

Analysis of cumene (isopropylbenzene) degradation genes from Pseudomonas fluorescens IP01.

We obtained the DNA fragments encoding 2-hydroxy-6-oxo-7-methylocta-2,4-dienoic acid (HOMODA) hydrolase in the cumene (isopropylbenzene) degrader Pseudomonas fluorescens strain IP01 via PCR using two synthesized oligonucleotides corresponding to the conserved regions within known meta-cleavage compound hydrolases. Following colony hybridization using the amplified DNA as a probe, a 4.5-kb HindIII fragment was isolated from P. fluorescens IP01. After determining the nucleotide sequence of this fragment, three open reading frames (ORF11 [cumH], ORF12 [cumD], and ORF13) were identified. The deduced amino acid sequence of ORF12 showed homology with meta-cleavage compound hydrolases encoded by the tod, dmp, xyl, and bph operons. Although the product of ORF12 was found to exhibit HOMODA and 2-hydroxy-6-oxohepta-2,4-dienoic acid (HOHDA) hydrolase activities, it did not exhibit 2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoic acid (HOPDA) hydrolase activity. The deduced amino acid sequence of ORF11 showed 40.4% homology with the sequence of todX in Pseudomonas putida F1 (Y. Wang, M. Ralings, D. T. Gibson, D. Labbé, H. Bergeron, R. Brousseau, and P. C. K. Lau, Mol. Gen. Genet. 246:570-579, 1995). The nucleotide sequence of ORF13 and its flanking region showed strong homology (91.0%) with IS52 from Pseudomonas savastanoi (Y. Yamada, P.-D. Lee, and T. Kosuge, Proc. Natl. Acad. Sci. USA 83:8263-8267, 1982). By characterization of cumH and cumD, the entire cum gene cluster from the cumene-degrader P. fluorescens IP01 (cumA1A2A3A4BCEGFHD) has been identified.     

The key role of a non-active-site residue Met148 on the catalytic efficiency of meta-cleavage product hydrolase BphD

meta-Cleavage product (MCP) hydrolases (EC 3.7.1.9) can catalyze a specific C–C bond fission during the microbial aerobic degradation of aromatics. The previous studies on structure–function relationship of MCP hydrolases mainly focus on the active site residues by site-directed mutagenesis. However, the information about the role of the non-active-site residues is still unclear. In this study, a non-active-site residue Met148 of MCP hydrolase BphD was selected as the mutagenesis site according to the sequence alignments, structure superimpose and the tunnel analysis, which underwent the saturation mutagenesis resulting 19 mutants. The catalytic efficiencies of the mutants on 6-oxo-6-phenylhexa-2,4-dienoic acid (HOPDA) were all decreased compared with the wild-type one except for the M148D mutant. Especially, the M148P mutant exhibited 290-fold lower k _cat/K _m than that of the wild-type BphD. Transient kinetic analyses of M148P showed the reciprocal relaxation time corresponded to C–C bond cleavage and product release steps (9.6 s^?1) was 4.08-fold lower than BphD WT (39.2 s^?1). Tunnel cluster analysis of BphD WT, M148P and M148W demonstrated that only the bulky Trp148 could block tunnel T2 in the BphD WT, but it exhibited slight effects on the catalytic efficiency (0.94-fold of BphD WT). Therefore, product release was not the main reason for the efficiency decrease of M148P. On the other hand, molecular dynamics simulations on the BphD WT and BphD M148P in complex with HOPDA indicated that the dramatic decrease of the catalytic efficiencies of BphD M148P should be due to the unproductive binding of HOPDA. The study demonstrated the catalytic efficiency of MCP hydrolase can be engineered by modification of non-active site residue.     

Crystal structure of the terminal oxygenase component of cumene dioxygenase from Pseudomonas fluorescens IP01

The crystal structure of the terminal component of the cumene dioxygenase multicomponent enzyme system of Pseudomonas fluorescens IP01 (CumDO) was determined at a resolution of 2.2 A by means of molecular replacement by using the crystal structure of the terminal oxygenase component of naphthalene dioxygenase from Pseudomonas sp. strain NCIB 9816-4 (NphDO). The ligation of the two catalytic centers of CumDO (i.e., the nonheme iron and Rieske [2Fe-2S] centers) and the bridging between them in neighboring catalytic subunits by hydrogen bonds through a single amino acid residue, Asp231, are similar to those of NphDO. An unidentified external ligand, possibly dioxygen, was bound at the active site nonheme iron. The entrance to the active site of CumDO is different from the entrance to the active site of NphDO, as the two loops forming the lid exhibit great deviation. On the basis of the complex structure of NphDO, a biphenyl substrate was modeled in the substrate-binding pocket of CumDO. The residues surrounding the modeled biphenyl molecule include residues that have already been shown to be important for its substrate specificity by a number of engineering studies of biphenyl dioxygenases.     

Tuning the substrate selectivity of meta-cleavage product hydrolase by domain swapping

meta-Cleavage product (MCP) hydrolases can catalyze relatively low reactive carbon–carbon bond hydrolysis of products, which are derived from the meta-cleavage of catechols. The strict substrate selectivity of MCP hydrolases attracts an interest to understand the determinants of substrate specificity. Compared with conventional site-directed mutagenesis, domain swapping is an effective strategy to explore substrate specificity due to the large-scale reorganization of three-dimensional structure. In the present study, the hybrid MCP hydrolases BphD_LidA and MfphA_LidD were constructed by exchanging the lid domain of two parental enzymes MfphA and BphD. The residues Gly130/Ala196 (MfphA) and Gly136/Ala211 (BphD) were selected as crossover points according to structural disruption score analysis and molecular dynamics simulations. It was shown that the hybrid enzymes exhibited similar substrate selectivity with the parent enzyme providing the lid domain. Docking studies suggested that the lid domain may play a key role in determining substrate specificity by reshaping the active pocket and modulating the orientation of the substrate.     

Purification and characterization of meta-cleavage compound hydrolase from a carbazole degrader Pseudomonas resinovorans strain CA10

2-Hydroxy-6-oxo-6-(2'-aminophenyl)-hexa-2,4dienoic acid [6-(2'-aminophenyl)-HODA] hydrolase, involved in carbazole degradation by Pseudomonas resinovorans strain CA10, was purified to near homogeneity from an overexpressing Escherichia coli strain. The enzyme was dimeric, and its optimum pH was 7.0-7.5. Phylogenetic analysis showed the close relationship of this enzyme to other hydrolases involved in the degradation of monocyclic aromatic compounds, and this enzyme was specific for 2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoic acid (6-phenyl-HODA), having little activity toward 2-hydroxy-6-oxohepta-2,4-dienoic acid and 2-hydroxymuconic semialdehyde. The enzyme had a Km of 2.51 microM and k(cat) of 2.14 (s(-1)) for 6-phenyl-HODA (50 mM sodium phosphate, pH 7.5, 25 degrees C). The effect of the presence of an amino group or hydroxyl group at the 2'-position of phenyl moiety of 6-phenyl-HODA on the enzyme activity was found to be small; the activity decreased only in the order of 6-(2'-aminophenyl)-HODA (2.44 U/mg) > 6-phenyl-HODA (1.99 U / mg) > 2-hydroxy-6-oxo-6-(2'-hydroxyphenyl)-hexa-2,4-dienoic acid (1.05 U/mg). The effects of 2'-substitution on the activity were in accordance with the predicted reactivity based on the calculated lowest unoccupied molecular orbital energy for these substrates.     

Kinetic study of the catalytic mechanism of mannitol dehydrogenase from Pseudomonas fluorescens.

To characterize catalysis by NAD-dependent long-chain mannitol 2-dehydrogenases (MDHs), the recombinant wild-type MDH from Pseudomonas fluorescens was overexpressed in Escherichia coli and purified. The enzyme is a functional monomer of 54 kDa, which does not contain Zn(2+) and has B-type stereospecificity with respect to hydride transfer from NADH. Analysis of initial velocity patterns together with product and substrate inhibition patterns and comparison of primary deuterium isotope effects on the apparent kinetic parameters, (D)k(cat), (D)(k(cat)/K(NADH)), and (D)(k(cat)/K(fructose)), show that MDH has an ordered kinetic mechanism at pH 8.2 in which NADH adds before D-fructose, and D-mannitol and NAD are released in that order. Isomerization of E-NAD to a form which interacts with D-mannitol nonproductively or dissociation of NAD from the binary complex after isomerization is the slowest step (>/=110 s(-)(1)) in D-fructose reduction at pH 8.2. Release of NADH from E-NADH (32 s(-)(1)) is the major rate-limiting step in mannitol oxidation at this pH. At the pH optimum for D-fructose reduction (pH 7.0), the rate of hydride transfer contributes significantly to rate limitation of the catalytic cascade and the overall reaction. (D)(k(cat)/K(fructose)) decreases from 2.57 at pH 7.0 to a value of 相似文献   

Molecular and catalytic properties of 2,4-diacetylphloroglucinol hydrolase (PhlG) from Pseudomonas sp. YGJ3

Gene phlG encoding 2,4-diacetylphloroglucinol hydrolase was cloned from Pseudomonas sp. YGJ3 and expressed in Escherichia coli. Recombinant PhlG was purified homogeneously. It required 2-mercaptoethanol for stability. Km for 2,4-diacetylphloroglucinol and kcat were determined to be 24 μM and 5.8 s(-1) respectively. CoCl2 specifically and significantly activated PhlG.     

Gene encoding the hydrolase for the product of the meta-cleavage reaction in testosterone degradation by Comamonas testosteroni

In a previous study we isolated the meta-cleavage enzyme gene, tesB, that encodes an enzyme that carries out a meta-cleavage reaction in the breakdown of testosterone by Comamonas testeroni TA441 (M. Horinouchi et al., Microbiology 147:3367-3375, 2001). Here we report the isolation of a gene, tesD, that encodes a hydrolase which acts on the product of the meta-cleavage reaction. We isolated tesD by using a Tn5 mutant of TA441 that showed limited growth on testosterone. TesD exhibited ca. 40% identity in amino acid sequence with BphDs, known hydrolases of biphenyl degradation in Pseudomonas spp. The TesD-disrupted mutant showed limited growth on testosterone, and the culture shows an intense yellow color. High-pressure liquid chromatography analysis of the culture of TesD-disrupted mutant incubated with testosterone detected five major intermediate compounds, one of which, showing yellow color under neutral conditions, was considered to be the product of the meta-cleavage reaction. The methylation product was analyzed and identified as methyl-4,5-9,10-diseco-3-methoxy-5,9,17-trioxoandrosta-1(10),2-dien-4-oate, indicating that the substrate of TesD in testosterone degradation is 4,5-9,10-diseco-3-hydroxy-5,9,17-trioxoandrosta-1(10),2-dien-4-oic acid. 4,5-9,10-Diseco-3-hydroxy-5,9,17-trioxoandrosta-1(10),2-dien-4-oic acid was transformed by Escherichia coli-expressed TesD. Downstream of tesD, we identified tesE, F, and G, which encode for enzymes that degrade one of the products of 4,5-9,10-diseco-3-hydroxy-5,9,17-trioxoandrosta-1(10),2-dien-4-oic acid converted by TesD.     

Nucleotide sequences of the meta-cleavage pathway enzymes 2-hydroxymuconic semialdehyde dehydrogenase and 2-hydroxymuconic semialdehyde hydrolase from Pseudomonas CF600

The nucleotide sequence of a 2493 base pair (bp) region, spanning the coding regions for the meta-cleavage pathway enzymes 2-hydroxymuconic semialdehyde dehydrogenase (HMSD) and 2-hydroxymuconic semialdehyde hydrolase (HMSH), was determined. The deduced protein sequence for HMSD is 486 amino acid residues long with an Mr of 51,682. HMSD has homology with a number of aldehyde dehydrogenases from various eukaryotic sources. The deduced protein sequence for HMSH is 283 amino acids long with an Mr of 30,965. The amino acid composition of this enzyme is similar to that of isofunctional enzymes from toluene and m-cresol catabolic pathways.     

Physicochemical properties of a lipase from Pseudomonas fluorescens.

The molecular weight of traicylglycerol lipase (EC 3.1.1.3) from Pseudomonas fluorescens is estimated to be approx. 33 000 by sodium dodecyl sulfate electrophoresis and Sephadex G-75 gel filtration. The lipase appears to be a single-chain protein and contains neither sugar nor lipid. The enzyme has a sedimentation coefficient (S20,w) of 3.06, an intrinsic viscosity of 3.0 g/ml and a partial specific volume of 0.730 g/ml, with an isoelectric point of pH 4.46. Amino acid analysis showed that the enzyme contained few sulfur-containing amino acid residues with no disulfide links. The N-terminal residue of the enzyme was found to be alanine and optical rotation dispersion analysis showed that about 20% of the enzyme structure was in a helicla configuration.     

Characteristics of lipopolysaccharide from Pseudomonas fluorescens (biovar I)]

Lipopolysaccharide (LPS) of the Pseudomonas fluorescens strain IMV 7769 (biovar I) was isolated and investigated. Fractions of the structural parts of the LPS macromolecule, lipid A, the core oligosaccharide, and the O-specific polysaccharide (O-PS), were obtained in a homogeneous state. 2-Hydroxydecanoic, 3-hydroxydecanoic, dodecanoic, 2-hydroxydodecanoic, 3-hydroxydodecanoic, hexadecanoic, octadecanoic, hexadecenoic, and octadecenoic fatty acids were identified in lipid A. In the hydrophilic moiety of lipid A, after acid hydrolysis, several amino acids, phosphoethanolamine, glucosamine, and three unidentified peaks forming a separate cluster together with glucosamine were found. Lipid A was shown to be phosphorylated. Glucose, fucose, rhamnose, glucosamine, galactosamine, two unidentified amino sugars, 2-keto-3-deoxyoctulonic acid (KDO), heptose, ethanolamine, phosphoethanolamine, and alanine were identified in the core oligosaccharide. O-PS of the LPS consisted of repeating trisaccharide fragments that included residues of amino sugars: 4-acetamido-4,6-dideoxy-D-galactose, 2-acetamido-2,6-dideoxy-D-glucose, and 2-acetamido-2,6-dideoxy-L-glucose. During growth, the strain under study excreted exocellular LPS (ELPS) into the medium. The LPS studied was similar to the LPS of the earlier investigated strains P. fluorescens (biovar I) IMV 1152 and IMV 1433 in the structure of O-PS, but differed from them in the composition of both lipid A and the core oligosaccharide. The LPS of the strain studied differed from LPS of the type strain P. fluorescens IMV 4125 (ATCC 13525) in all characteristics determined.     

trans-Dienelactone hydrolase from Pseudomonas reinekei MT1, a novel zinc-dependent hydrolase

Pseudomonas reinekei MT1 is capable of growing on 4- and 5-chlorosalicylate, involving a pathway with trans-dienelactone hydrolase (trans-DLH) as a key enzyme. It acts on 4-chloromuconolactone formed during cycloisomerization of 3-chloromuconate by hydrolyzing it to maleylacetate. The gene encoding this activity was localized, sequenced and expressed in Escherichia coli. Inductively coupled plasma mass spectrometry showed that both the wild-type as well as recombinant enzymes contained 2 moles of zinc but variable amounts of manganese/mol of protein subunit. The inactive metal-free apoenzyme could be reactivated by Zn²⁺ or Mn²⁺. Thus, trans-DLH is a Zn²⁺-dependent hydrolase using halosubstituted muconolactones and trans-dienelactone as substrates, where Mn²⁺ can substitute for Zn²⁺. It is the first member of COG1878 and PF04199 for which a direct physiological function has been reported.     

Three-dimensional structure of kynureninase from Pseudomonas fluorescens

Kynureninase [E.C. 3.7.1.3] is a pyridoxal-5'-phosphate (PLP)-dependent enzyme that catalyzes the hydrolytic cleavage of l-kynurenine to anthranilic acid and l-alanine. Sequence alignment with other PLP-dependent enzymes indicated that kynureninase is in subgroup IVa of the aminotransferases, along with nifS, CsdB, and serine-pyruvate aminotransferase, which suggests that kynureninase has an aminotransferase fold. Crystals of Pseudomonas fluorescens kynureninase were obtained, and the structure was solved by molecular replacement using the CsdB coordinates combined with multiple isomorphous heavy atom replacement. The coordinates were deposited in the PDB (ID code 1QZ9). The structure, refined to an R factor of 15.5% to 1.85 A resolution, is dimeric and has the aminotransferase fold. The structure also confirms the prediction from sequence alignment that Lys-227 is the PLP-binding residue in P. fluorescens kynureninase. The conserved Asp-201, expected for an aminotransferase fold, is located near the PLP nitrogen, but Asp-132 is also strictly conserved and at a similar distance from the pyridinium nitrogen. Mutagenesis of both conserved aspartic acids shows that both contribute equally to PLP binding, but Asp-201 has a greater role in catalysis. The structure shows that Tyr-226 donates a hydrogen bond to the phosphate of PLP. Unusual among PLP-dependent enzymes, Trp-256, which is also strictly conserved in kynureninases from bacteria to humans, donates a hydrogen bond to the phosphate through the indole N1-hydrogen.     

Characterization of a Protease from a Psychrotroph, Pseudomonas fluorescens 114

A psychrotrophic bacterium isolated from river sediment was identified as Pseudomonas fluorescens 114. It grew at 0°C and optimally at 20°C. The bacterium produced a protease with a molecular weight of 47,000, which was stable in the pH range of 5 to 9 and worked optimally between pH 6.5 and 10. Activity was optimal at 35°C and was lost immediately at 50°C and after 5 min at 45°C. At 0, 10, and 20°C, 24, 38, and 57% of optimal activity were observed, respectively.     

The N-terminal region of an endoglucanase from Pseudomonas fluorescens subspecies cellulosa constitutes a cellulose-binding domain that is distinct from the catalytic centre

The substrate specificity of an endoglucanase (EGB) from Pseudomonas fluorescens subspecies cellulosa was determined. The enzyme was most active against barley beta-glucan, but showed significant activity against amorphous and crystalline cellulose. EGB was purified to homogeneity by affinity chromatography with crystalline cellulose (Avicel). The Mr of the purified enzyme was 50,000, which is in good agreement with the size of EGB deduced from the nucleotide sequence of the celB gene, coding for EGB. The N-terminal region of the mature form of EGB showed strong homology to another endoglucanase and to a xylanase expressed by the same organism; homologous sequences included highly conserved serine-rich regions. Truncated forms of celB, in which the gene sequence encoding the conserved domain had been deleted, directed the synthesis of a functional endoglucanase that did not bind to crystalline cellulose. This indicates that the conserved region of endoglucanases and xylanases expressed by P. fluorescens subsp. cellulosa constitutes a cellulose-binding domain, which is distinct from the active centre. The possible role of this substrate-binding region is discussed.