The sarcoplasmic reticulum Ca2+-ATPase

Summary This review summarizes studies on the structural organization of Ca²⁺-ATPase in the sarcoplasmic reticulum membrane in relation to the function of the transport protein. Recent advances in this field have been made by a combination of protein-chemical, ultrastructural, and physicochemical techniques on membraneous and detergent solubilized ATPase. A particular feature of the ATPase (Part I) is the presence of a hydrophilic head, facing the cytoplasm, and a tail inserted in the membrane. In agreement with this view the protein is moderately hydrophobic, compared to many other integral membrane proteins, and the number of traverses of the 115 000 Dalton peptide chain through the lipid may be limited to 3–4.There is increasing evidence (Part II) that the ATPase is self-associated in the membrane in oligomeric form. This appears to be a common feature of many transport proteins. Each ATPase peptide seems to be able to perform the whole catalytic cycle of ATP hydrolysis and Ca²⁺ transport. Protein-protein interactions seem to have a modulatory effect on enzyme activity and to stabilize the enzyme against inactivation.Phospholipids (Part III) are not essential for the expression of enzyme activity which only requires the presence of flexible hydrocarbon chains that can be provided e.g. by polyoxyethylene glycol detergents. Perturbation of the lipid bilayer by the insertion of membrane protein leads to some immobilization of the lipid hydrocarbon chains, but not to the extent envisaged by the annulus hypothesis. Strong immobilization, whenever it occurs, may arise from steric hindrance due to protein-protein contacts. Recent studies suggest that breaks in Arrhenius plots of enzyme activity primarily reflect intrinsic properties of the protein rather than changes in the character of lipid motion as a function of temperature.     

Regulation of cardiac sarcoplasmic reticulum (Ca2+ + Mg2+)-ATPase

Summary The two high affinity calcium binding sites of the cardiac (Ca²⁺ + Mg²⁺)-ATPase have been identified with the use of Eu³⁺. Eu³⁺ competes for the two high affinity calcium sites on the enzyme. With the use of laser-pulsed fluorescent spectroscopy, the environment of the two sites appear to be heterogeneous and contain different numbers of H₂O molecules coordinated to the ion. The ion appears to be occluded even further in the presence of ATP. Using non-radiative energy transfer studies, we were able to estimate the distance between the two Ca²⁺ sites to be between 9.4 to 10.2 A in the presence of ATP. Finally, from the assumption that the calcium site must contain four carboxylic side chains to provide the 6–8 ligands needed to coordinate calcium, and based on our recently published data, we predict the peptidic backbone of the two sites.     

Inhibition of sarcoplasmic reticulum Ca2+-ATPase by Mg2+ at high pH

Steady state turnover of Ca2+-ATPase of sarcoplasmic reticulum has generally been reported to have a bell-shaped pH profile, with an optimum near pH 7.0. While a free [Mg2+] of 2 mM is optimal for activity at pH 7.0, it was found that this level was markedly inhibitory (K1/2 = 2 mM) at pH 8.0, thus accounting for the generally observed low activity at high pH. High activity was restored at pH 8.0 using an optimum free [Mg2+] of 0.2 mM. The mechanism of the Mg2+-dependent inhibition at pH 8.0 was probed. Inhibition was not due to Mg2+ competition with Ca2+ for cytoplasmic transport sites nor to inhibition of formation of steady state phosphoenzyme from ATP. Mg2+ inhibited (K1/2 = 1.8 mM) decay of steady state phosphoenzyme; thus, the locus of inhibition was one of the phosphoenzyme interconversion steps. Transient kinetic experiments showed that Mg2+ competitively inhibited (Ki = 0.7 mM) binding of Ca2+ to lumenal transport sites, blocking the ability of Ca2+ to reverse the catalytic cycle to form ADP-sensitive, from ADP-insensitive, phosphoenzyme. The data were consistent with a hypothesis in which Mg2+ binds lumenal Ca2+ transport sites with progressively higher affinity at higher pH to form a dead-end complex; its dissociation would then be rate-limiting during steady state turnover.     

Inhibition of sarcoplasmic reticulum Ca2+-ATPase by miconazole

The inhibition of sarcoplasmic reticulumCa²⁺-ATPase activity by miconazole was dependent on theconcentration of ATP and membrane protein. Half-maximal inhibition wasobserved at 12 µM miconazole when the ATP concentration was 50 µMand the membrane protein was 0.05 mg/ml. When ATP was 1 mM, a lowmicromolar concentration of miconazole activated the enzyme, whereashigher concentrations inhibited it. A qualitatively similar responsewas observed when Ca²⁺ transport was measured. Likewise,the half-maximal inhibition value was higher when the membraneconcentration was raised. Phosphorylation studies carried out aftersample preequilibration in different experimental settings shed lighton key partial reactions such as Ca²⁺ binding and ATPphosphorylation. The miconazole effect on Ca²⁺-ATPaseactivity can be attributed to stabilization of theCa²⁺-free enzyme conformation giving rise to a decrease inthe rate of the Ca²⁺ binding transition. The phosphoryltransfer reaction was not affected by miconazole.

     

Inhibition of sarcoplasmic reticulum Ca2+-ATPase by 2-mercaptoethanol

The Ca²⁺-dependent ATPase activity of sarcoplasmic reticulum was inhibited when membrane vesicles were incubated at 0°C in presence of thiols. 2-mercaptoethanol was the most effective inhibitor from the thiols tested. The effect of 2-mercaptoethanol on the ATPase activity was biphasic; enzyme inhibition originally increased and then decreased with increasing thiol concentration. The inhibitory action of this thiol was significantly higher at low membrane concentrations and the rate of inactivation at 22°C was considerably lower than that at 0°C. Ca²⁺-ATPase previously inhibited by 2-mercaptoethanol was partially reactivated by incubation with periodate.     

Heterologous expression of sarcoplasmic reticulum Ca2+-ATPase

In recent years, expression of rabbit sarcoplasmic reticulum (SR) Ca²⁺-ATPase in heterologous systems has been a widely used strategy to study altered enzymes generated by site-directed mutagenesis. Various eukaryotic expression systems have been tested, all of them yielding comparable amounts of recombinant protein. However, the relatively low yield of recombinant protein obtained so far suggests that novel purification techniques will be required to allow further characterization of this enzyme based on direct ligand-binding measurements.     

Characterisation of thapsigargin-releasable Ca(2+) from the Ca(2+)-ATPase of sarcoplasmic reticulum at limiting [Ca(2+)

The Ca(2+) binding sites of the Ca(2+)-ATPase of skeletal muscle sarcoplasmic reticulum (SR) have been identified as two high-affinity sites orientated towards the cytoplasm, two sites of low affinity facing the lumen, and a transient occluded species that is isolated from both membrane surfaces. Binding and release studies, using (45)Ca(2+), have invoked models with sequential binding and release from high- and low-affinity sites in a channel-like structure. We have characterised turnover conditions in isolated SR vesicles with oxalate in a Ca(2+)-limited state, [Ca(2)](lim), where both high- and low-affinity sites are vacant in the absence of chelators (Biochim. Biophys. Acta 1418 (1999) 48-60). Thapsigargin (TG), a high-affinity specific inhibitor of the Ca(2+)-ATPase, released a fraction of total Ca(2+) at [Ca(2+)](lim) that accumulated during active transport. Maximal Ca(2+) release was at 2:1 TG/ATPase. Ionophore, A23187, and Triton X-100 released the rest of Ca(2+) resistant to TG. The amount of Ca(2+) released depended on the incubation time at [Ca(2+)](lim), being 3.0 nmol/mg at 20 s and 0.42 nmol/mg at 1000 s. Rate constants for release declined from 0. 13 to 0.03 s(-1). The rapidly released early fraction declined with time and k=0.13 min(-1). Release was not due to reversal of the pump cycle since ADP had no effect; neither was release impaired with substrates acetyl phosphate or GTP. A phase of reuptake of Ca(2+) followed release, being greater with shorter delay (up to 200 s) following active transport. Reuptake was minimal with GTP, with delays more than 300 s, and was abolished by vanadate and at higher [TG], >5 microM. Ruthenium red had no effect on efflux, indicating that ryanodine-sensitive efflux channels in terminal cisternal membranes are not involved in the Ca(2+) release mechanism. It is concluded that the Ca(2+) released by TG is from the occluded Ca(2+) fraction. The Ca(2+) occlusion sites appear to be independent of both high-affinity cytoplasmic and low-affinity lumenal sites, supporting a multisite 'in line' sequential binding mechanism for Ca(2+) transport.     

Occlusion of Ca2+ in soluble monomeric sarcoplasmic reticulum Ca2+-ATPase

Sarcoplasmic reticulum Ca2+-ATPase solubilized in monomeric form by nonionic detergent was reacted with CrATP in the presence of 45Ca2+. A Ca2+-occluded complex formed, which was stable during high performance liquid chromatography in the presence of excess non-radioactive Ca2+. The elution position corresponded to monomeric Ca2+-ATPase. It is concluded that a single Ca2+-ATPase polypeptide chain provides the full structural basis for Ca2+ occlusion.     

Crystallization of Ca2+-ATPase in detergent-solubilized sarcoplasmic reticulum

Microcrystalline arrays of Ca2+-transporting ATPase (EC 3.6.1.38) develop in detergent-solubilized sarcoplasmic reticulum upon exposure to 10-20 mM CaCl2 at pH 6.0 for several weeks at 2 degrees C, in a crystallization medium that preserves the ATPase activity for several months. Of 48 detergents tested, optimal crystallization was obtained with Brij 36T, Brij 56, and Brij 96 at a detergent:protein weight ratio of 4:1 and with octaethylene glycol dodecyl ether at a ratio of 2:1. Similar Ca2+-induced crystalline arrays were obtained with the purified or delipidated Ca2+-ATPase of sarcoplasmic reticulum but at lower detergent:protein ratios. The crystals are stabilized by fixation with glutaraldehyde and persist even after the removal of phospholipids by treatment with phospholipases A or C and by extraction with organic solvents. The crystals obtained so far can be used only for electron microscopy, but ongoing experiments suggest that under similar conditions large ordered arrays may develop that are suitable for x-ray diffraction analysis.     

The dimeric form of Ca2+-ATPase is involved in Ca2+ transport in the sarcoplasmic reticulum

To identify the functional unit of Ca(2+)-ATPase in the sarcoplasmic reticulum, we assessed Ca(2+)-transport activities occurring on sarcoplasmic reticulum membranes with different combinations of active and inactive Ca(2+)-ATPase molecules. We prepared heterodimers, consisting of a native Ca(2+)-ATPase molecule and a Ca(2+)-ATPase molecule inactivated by FITC labelling, by fusing vesicles loaded with each type of Ca(2+)-ATPase. The heterodimers exhibited neither Ca(2+) transport nor ATP hydrolysis, suggesting that Ca(2+) transport by the Ca(2+)-ATPase requires an interaction between functional Ca(2+)-ATPase monomers. This finding implies that the functional unit of the Ca(2+)-ATPase is a dimer.     

Interaction of amphipols with sarcoplasmic reticulum Ca2+-ATPase

Amphipols are short-chain amphipathic polymers designed to keep membrane proteins soluble in aqueous solutions. We have evaluated the effects of the interaction of amphipols with sarcoplasmic reticulum Ca(2+)-ATPase either in a membrane-bound or a soluble form. If the addition of amphipols to detergent-solubilized ATPase was followed by removal of detergent, soluble complexes formed, but these complexes retained poor ATPase activity, were not very stable upon long incubation periods, and at high concentrations they experienced aggregation. Nevertheless, adding excess detergent to diluted detergent-free ATPase-amphipol complexes incubated for short periods immediately restored full activity to these complexes, showing that amphipols had protected solubilized ATPase from the rapid and irreversible inactivation that otherwise follows detergent removal. Amphipols also protected solubilized ATPase from the rapid and irreversible inactivation observed in detergent solutions if the ATPase Ca(2+) binding sites remain vacant. Moreover, in the presence of Ca(2+), amphipol/detergent mixtures stabilized concentrated ATPase against inactivation and aggregation, whether in the presence or absence of lipids, for much longer periods of time (days) than detergent alone. Our observations suggest that mixtures of amphipols and detergents are promising media for handling solubilized Ca(2+)-ATPase under conditions that would otherwise lead to its irreversible denaturation and/or aggregation.     

Ca2+-ATPase from sarcoplasmic reticulum: acylphosphatase activity

Fractionation of sarcoplasmic reticulum vesicles from rabbit skeletal muscle was performed by solubilization of the vesicles in the presence of deoxycholate, followed by sucrose density gradient centrifugation and gel filtration chromatography. This procedure permitted the isolation of essentially pure Ca²⁺-ATPase; this enzyme showed ATPase as well as acylphosphatase activity, both activities being clearly enhanced by deoxycholate. The acylphosphatase activity of the purified Ca²⁺-ATPase was characterized with regard to some kinetic properties, such as pH, Mg²⁺, Ca²⁺, and deoxycholate dependence, and substrate affinity, determined in the presence of acetylphosphate, succinylphosphate, carbamylphosphate, and benzoylphosphate; in addition, the stability of both activities was checked in time-course experiments. The main similarities between the two activities, such as the Mg²⁺ requirement, the deoxycholate activation, and the pH dependence, together with the competitive inhibition of the benzoylphosphatase activity by ATP, the inhibition of both activities by tris(bathophenanthroline)-Fe²⁺, and the relief of this inhibitory effect by carbonylcyanide-4-trifluoromethoxyphenyl hydrazone support the hypothesis that acylphosphatase and ATPase activities of sarcoplasmic reticulum vesicles reside in the same active site of the enzyme. With regard to possible relationships between acylphosphatase activity of the purified Ca²⁺-ATPase and “soluble” acylphosphatase present in the 100,000g supernatant fraction, comparison of some kinetic and structural parameters indicate that these two activities are supported by quite different enzymes.     

Differentiation between Ca2+ transport and ATP-induced Ca2+ binding by sarcoplasmic reticulum

The Ca²⁺ actively accumulated by sarcoplasmic reticulum isolated from skeletal muscle is composed of two fractions; one represented by intravesicular free Ca²⁺ and another represented by Ca²⁺ selectively bound to the membranes. Both of these Ca²⁺ fractions depend on ATP, although it is not clear whether ATP hydrolysis is essential for accumulation of the second Ca²⁺ fraction. The existence of the membrane-bound Ca²⁺ induced by ATP is clearly shown in experiments in which the Ca²⁺ retention by sarcoplasmic reticulum is measured in the presence and in the absence of X-537A, a Ca²⁺ ionophore, which makes the membrane permeable to Ca²⁺. Thus, in the presence of X-537A all Ca²⁺ accumulated due to ATP is bound to the membranes. This membrane-bound Ca²⁺ represents about 30 nmol/mg protein in the range of external $\text{p}\text{Ca}$ values of 7 to 3.5. The magnitude of this Ca²⁺ fraction is slightly higher whether or not the experiments are performed in the presence of oxalate, which greatly increased the intravesicular Ca²⁺ accumulation. Furthermore, taking advantage of the impermeability of sarcoplasmic reticulum to EGTA, it is possible to show the existence of the membrane-bound Ca²⁺ as a distinct fraction from that which exists intravesicularly.     

Uncoupling of Ca2+ transport from ATP hydrolysis activity of sarcoplasmic reticulum (Ca2+ + Mg2+)-ATPase

Summary In reconstituted rabbit skeletal muscle (Ca²⁺ + Mg²⁺)-ATPase proteoliposomes, Ca²⁺-uptake is decreased by more than 90% with T₂ cleavage (Arg-198). However, no difference in the ATP dependence of hydrolysis activity is seen between SR and trypsin-treated SR. A large decrease in E-P formation and hydrolysis activity of the enzyme appear only at T₃ cleavage, which represents the cleavage of A₁ fragment to A_1a + A_1b forms. The disappearance of hydrolysis activity due to digestion is prior to the disappearance of E-P formation. No significant difference is found in the passive Ca²⁺ efflux between control SR and tryptically digested SR in the absence of Mg⁺ ruthenium red or in the presence of ATP. However, the passive Ca²⁺ efflux rate for tryptically digested SR is much larger than control SR in the presence of Mg²⁺ + ruthenium red. These results show that the Ca²⁺ channel cannot be closed after trypsin digestion of SR membranes by the presence of the Ca²⁺ channel inhibitors, Mg²⁺ and ruthenium red. In the reconstituted ATPase proteoliposomes, the Ca²⁺ efflux rates are the same regardless of digestion (T₂); also, efflux is not affected by the presence or absence of Mg²⁺ + ruthenium red. These results indicate that T₂ cleavage causes uncoupling of the Ca²⁺-pump from ATP hydrolytic activity.A theoretical model is developed in order to fit the extent of tryptic digestion of the A fragment of the (Ca²⁺ + Mg²⁺)-ATPase polypeptide with the loss of Ca²⁺-transport. Fits of the theoretical equations to the data are consistent with that Ca²⁺-transport system appears to require a dimer of the polypeptide (Ca²⁺ + Mg²⁺)-ATPase.     

The structure of the Ca2+-ATPase of sarcoplasmic reticulum

In this article the morphology of sarcoplasmic reticulum, classification of Ca(2+)-ATPase (SERCA) isoenzymes presented in this membrane system, as well as their topology will be reviewed. The focus is on the structure and interactions of Ca(2+)-ATPase determined by electron and X-ray crystallography, lamellar X-ray and neutron diffraction analysis of the profile structure of Ca(2+)-ATPase in sarcoplasmic reticulum multilayers. In addition, targeting of the Ca(2+)-ATPase to the sarcoplasmic reticulum is discussed.     

Tryptophan phosphorescence of the Ca2+-ATPase of sarcoplasmic reticulum

Phosphorescence of protein tryptophan was analyzed in sarcoplasmic reticulum vesicles, and in the purified Ca2+ transport ATPase in deoxygenated aqueous solutions at room temperature. Upon excitation with light of 295 nm wavelength, the emission maxima of fluorescence and phosphorescence were at 330 nm and at 445 nm, respectively. The phosphorescence decay was multiexponential; the lifetime of the long-lived component of phosphorescence was approximately equal to 22 ms. ATP and vandate significantly reduced the phosphorescence in the presence of either Ca2+ or EGTA; ADP was less effective, while AMP was without effect. The quenching by ATP showed saturation consistent with the idea that the ATP-enzyme complex had a lower phosphorescence yield. Upon exhaustion of ATP, the phosphorescence returned to starting level. Significant quenching of phosphorescence with a decrease in phosphorescence lifetime was also caused by NaNO2, methylvinyl ketone and trichloroacetate, without effect on ATPase activity; this quenching did not show saturation and was therefore probably collisional in nature.     

Steroid-induced conformational changes of FITC-labelled sarcoplasmic reticulum Ca2+-ATPase

Interactions between transmembrane and cytoplasmic domains of Ca2+-ATPase from sarcoplasmic reticulum (SR) have been studied. To affect the hydrophobic transmembrane domain, we used four amphiphilic steroids - esters of a dibasic acid and 20-oxypregnene. All four steroids contained cholesterol-like nuclei and differed by the structure of side chains. Steroids with carboxyl groups in the side chains inhibited the rates of ATP hydrolysis and Ca2+ transport, whereas a steroid without the carboxyl group did not appreciably affect Ca2+-ATPase function. Fluorimetric titration of FITC-labelled Ca2+-ATPase in SR vesicles by Nd3+ showed that steroids increased the apparent dissociation constant for Nd3+ bound to the hydrolytic site, the potency order of the steroids being the same as for the sterol-induced inhibition of the hydrolytic activity of Ca2+-ATPase. These results suggest structural changes in the active site. Ca2+ transport was inhibited more efficiently by steroids than the hydrolytic activity of the enzyme. This could be partially due to the increase of the membrane passive permeability induced by steroids, which, in turn, reflected the efficiency of the interaction of the steroids with lipid bilayers. The effects of the steroids were largely dependent on their amphiphilicity (the availability of polar groups in regions A and D), the structure of the side chains, and, possibly, on the distance between the molecular polar groups. We suggest that the inhibition of hydrolytic and transport functions of Ca2+-ATPase in the SR membrane is due to the interaction of the steroids with the transmembrane alpha-helical segments.     

Structural aspects of ion pumping by Ca2+-ATPase of sarcoplasmic reticulum

Ca²⁺-ATPase of muscle sarcoplasmic reticulum is an ATP-powered Ca²⁺-pump that establishes a >10,000-fold concentration gradient across the membrane. Its crystal structures have been determined for nine different states that cover nearly the entire reaction cycle. Presented here is a brief structural account of the ion pumping process, which is achieved by a series of very large domain rearrangements.     

Properties of deoxycholate solubilized sarcoplasmic reticulum Ca2+-ATPase.

The Ca2+-dependent ATPase of sarcoplasmic reticulum after solubilization with deoxycholate and removal of lipid by gel chromatography exists as a mixture of monomer, dimer, and smaller amounts of higher molecular weight aggregates. The binding capcity of deoxycholate by monomeric and oligomeric forms of the ATPase is 0.3 g/g of protein at pH 8 and ionic strength 0.11. Examination in the analytical ultracentrifuge results in estimates of protein molecular weight of monomer of 115 000 +/- 7000 and of Stokes radius of 50-55 A. The results indicate an asymmetric shape of both delipidated monomer and dimer. Solubilization of ATPase vesicles by deoxycholate at high protein dilutions leads to almost instantaneous loss of ATPase activity. However, ATPase may be solubilized by deoxycholate in presence of phospholipid and sucrose in a temporarily active state. Inactivation appears to be accompanied by delipidation and conformational changes of the protein as evidenced by circular dichroism measurements. Sedimentation velocity examination of enzymatically active preparations of soluble ATPase in presence of phospholipid and sucrose strongly suggests that the major part of enzymatic activity is derived from a monomer with an asymmetric shape. The extent of formation of soluble oligomers by column chromatography was dependent on the exact conditions used for initial solubilization of ATPase. No evidence for differences among monomer and dimer fractions was obtained by isoelectric focusing and amino acid analysis. The results of these studies are compatible with electron-microscopic studies by other authors which suggest that the ATPase has an elongated shape with limited hydrophobic contact with the membrane lipid. A resemblance of delipidated oligomers with the form in which ATPase occurs in the membrane is conjectural at present.