Nucleotide sequence and structural relationships of a chloramphenicol acetyltransferase encoded by the plasmid pSCS6 from Staphylococcus aureus.

The 4.6 kb chloramphenicol resistance (Cm) plasmid, pSCS6, isolated from a naturally occurring Staphylococcus aureus biotype C encoded an inducible chloramphenicol acetyltransferase (CAT). The respective cat gene and its regulatory region were cloned. Sequence analyses revealed two open reading frames: one for a 9-amino acid leader peptide and the other for the 215-amino acid CAT monomer. Comparisons of the predicted CAT amino acid sequences revealed a high degree of similarity between CAT from pSCS6 and the CAT variants encoded by Cm plasmids of the pC221 family. These close structural relationships suggested an intraspecific exchange of Cm-determinants between Staph. aureus of human and bovine biotype.     

Characterization of the chloramphenicol acetyltransferase variants encoded by the plasmids pSCS6 and pSCS7 from Staphylococcus aureus.

The two 4.6 kb chloramphenicol resistance (CmR) plasmids pSCS6 and pSCS7, previously identified in Staphylococcus aureus from subclinical bovine mastitis, both encoded an inducible chloramphenicol acetyltransferase (CAT, EC 2.3.1.28). The pSCS6- and pSCS7-encoded CAT variants were purified by ammonium sulphate precipitation, ion-exchange chromatography and fast protein liquid chromatography (FPLC). Both native enzymes showed Mr values of 70,000 on FPLC and were composed of three identical subunits, each of Mr approximately 23,000. The CAT variants from pSCS6 and pSCS7 differed in their net charges and in their isoelectric points. The isoelectric point of the CAT from pSCS6 was pH 5.7 and that of the CAT from pSCS7 pH 5.2. Both CAT variants exhibited highest enzyme activities at pH 8.0. The Km values for chloramphenicol and acetyl-CoA of the CAT from pSCS6 were 2.5 microM and 58.8 microM, respectively, while those of the CAT from pSCS7 were 2.7 microM and 55.5 microM. Both CAT variants were relatively thermostable. The CAT from pSCS6 was less sensitive to mercuric ions than the CAT from pSCS7.     

Nucleotide sequence of pS194, a streptomycin-resistance plasmid from Staphylococcus aureus

pS194 is a naturally occurring Staphylococcus aureus plasmid encoding streptomycin resistance. The plasmid has a copy number of about 25 per cell, and belongs to the inc5 incompatibility group. The nucleotide sequence of pS194 has been determined and consists of 4397 base pairs including four open reading frames potentially encoding proteins of greater than 100 amino acids. All four of these reading frames are on the same coding strand. The first reading frame, repE, encodes a 38 kd protein specifically required for pS194 replication. The second open reading frame, str, encodes a 34 kd polypeptide required for streptomycin resistance, probably a streptomycin adenylyltransferase. The third potential polypeptide, rlx, would be 37 kd and is probably required for relaxation complex formation and plasmid mobilization by conjugative plasmids. The fourth, orfD, overlapping the rlx reading frame, is potentially 27 kd, and may also be involved in mobilization.     

Nucleotide sequence and physical map of kanamycin-resistant plasmid pUB110 from Staphylococcus aureus

The complete nucleotide sequence of Staphylococcus aureus plasmid pUB10 was determined. The sequence consists of 4545 b.p. and contains 64% A-T and 36% G-C pairs. pUB110 was found to contain four open reading frames, capable of coding for polypeptides having more than 80 amino acids. All the putative polypeptides are coded for by one DNA strand. The molecular weights of four putative polypeptides are (in kilodaltons): A-49.5; B-38.8; C-28.8 and D-9.5. Polypeptide C is involved in kanamycin resistance. Polypeptide B is, possibly, involved in pUB110 replication. No role has yet been established for polypeptides A and D, since deletions in their coding sequences have no detectable effect on any properties of pUB110 plasmid.     

Regulation of the inducible chloramphenicol acetyltransferase gene of the Staphylococcus aureus plasmid pUB112.

Analyses of deletion mutants of the gene for chloramphenicol (Cm) acetyltransferase (CAT) carried by the staphylococcal plasmid pUB112 revealed a regulatory region, which is indispensable for Cm-inducible cat gene expression, located 70 bp in front of the CAT-coding sequence. This region consists of a possible ribosome binding site followed by an open reading frame coding for a peptide of nine amino acids and overlaps partially with an inverted repeat capable of forming a stem-loop structure. Deletion of the ribosome binding site and of parts of the open reading frame abolishes inducibility and results in a low-level cat gene expression, if the inverted repeat remains intact. Deletion of the 5' part of the possible stem leads to high-level constitutive CAT synthesis. The inverted repeat, therefore, exhibits negative control on cat gene expression whereas the preceding ribosome binding site is needed to enhance CAT synthesis in the presence of an inducer. These results suggest that translation of a leader peptide is a prerequisite for Cm-induced cat gene expression and that ribosome stalling on cat leader mRNA caused by Cm opens the stem-loop structure thereby releasing its negative effect on CAT synthesis.     

Nucleotide sequence of a Bacillus pumilus gene specifying chloramphenicol acetyltransferase

Gene cat-86 of Bacillus pumilus, specifying chloramphenicol-inducible chloramphenicol acetyltransferase, was previously cloned in Bacillus subtilis on plasmid pUB110. The nucleotide sequence of cat-86 indicates that the gene encodes a protein of 220 amino acids and contains TTG as the translations-initiation codon. The proteins specified by cat-86 and the cat genes present on pC194, pC221 and Tn9 appear to share regions of amino acid sequence similarity. cat-86 is a structural gene on the B. subtilis expression plasmid pPL608. Restriction sites exist within the gene that should permit the product of inserted heterologous coding sequences to be synthesized in B. subtilis as fusion proteins.     

Kinetics of induction and purification of chloramphenicol acetyltransferase from chloramphenicol-resistant Staphylococcus aureus

Plasmid-mediated chloramphenicol resistance in Staphylococcus aureus has been shown to involve acetylation of chloramphenicol by an enzyme induced by growth in the presence of the antibiotic and certain analogues. Analysis of the kinetics of induction has been complicated by (i) the intrinsic inhibitory effects of chloramphenicol on induced enzyme synthesis and (ii) the rapid disappearance of inducer after synthesis of the acetylating enzyme. The compound related to d-threo chloramphenicol which lacks a C(3) hydroxyl substituent (3-deoxychloramphenicol) is a potent inducer of chloramphenicol acetyltransferase but is ineffective as an antibiotic and is not a substrate for the enzyme. The availability of such a "gratuitous" inducer has simplified an analysis of the kinetics of induction of chloramphenicol acetyltransferase. The enzyme from induced bacteria has been purified to homogeneity and has been compared with the analogous enzyme present in E. coli which harbors a resistance transfer factor with the chloramphenicol resistance determinant.     

Cloning and sequence analysis of a plasmid-encoded chloramphenicol acetyltransferase gene from Staphylococcus intermedius.

The chloramphenicol acetyltransferase gene (cat) of a 3.9 kb chloramphenicol resistance (CmR) plasmid from Staphylococcus intermedius, designated pSCS1, was cloned into an Escherichia coli plasmid vector. Sequence analysis revealed a high degree of base similarity with the cat gene of the S. aureus CmR plasmid pC221 but there were several differences in the regulatory region. A lesser degree of similarity was observed between the cat gene of the S. intermedius plasmid and the cat gene of the S. aureus plasmid pC194.     

Nucleotide sequence and expression of the beta-lactamase gene from Staphylococcus aureus plasmid pI258 in Escherichia coli, Bacillus subtilis, and Staphylococcus aureus.

The structural gene for beta-lactamase in the Staphylococcus aureus plasmid pI258 was cloned into a Staphylococcus aureus-Bacillus subtilis-Escherichia coli shuttle vector, pWN101, and the nucleotide sequence of the gene was determined. pWN101 was structurally stable and the beta-lactamase gene was expressed efficiently from its native promoter and ribosome-binding site in all three hosts.     

Nucleotide sequence of the chloramphenicol resistance determinant of the streptococcal plasmid pIP501

We have sequenced the chloramphenicol resistance determinant (cat) of plasmid pIP501 from Streptococcus agalactiae to investigate its relationship with other cognate cat determinants. Sequence analysis revealed that it exhibits a high degree of similarity with the cat genes of plasmids pC221 and pUB112 from Staphylococcus aureus and pSCS1 from Staphylococcus intermedius. These genes, however, display several differences in their regulatory and coding regions. These results demonstrate that the cat determinant of plasmid pIP501 belongs to the pC221 subgroup of CAT variants.     

Nucleotide sequence of the constitutive macrolide-lincosamide-streptogramin B resistance plasmid pNE131 from Staphylococcus epidermidis and homologies with Staphylococcus aureus plasmids pE194 and pSN2.

The complete nucleotide sequence of the Staphylococcus epidermidis plasmid pNE131 is presented. The plasmid is 2,355 base pairs long and contains two major open reading frames. A comparison of the pNE131 DNA sequence with the published DNA sequences of five Staphylococcus aureus plasmids revealed strong regional homologies with two of them, pE194 and pSN2. The region of pNE131 containing the reading frame which encodes the constitutive ermM gene is almost identical to the inducible ermC gene region of pE194, except for a 107-base-pair deletion which removes the mRNA leader sequence required for inducible expression. A second region of pNE131 contains an open reading frame with homology to the small cryptic plasmid pSN2 and potentially encodes a 162-amino-acid protein.     

Nucleotide sequence analysis of IS256 from the Staphylococcus aureus gentamicin-tobramycin-kanamycin-resistance transposon Tn4001

Resistance to the aminoglycosides gentamicin, tobramycin and kanamycin (GmTmKmR) in Australian clinical strains of Staphylococcus aureus is commonly carried on the composite transposon Tn4001. The resistance gene aacA-aphD of Tn4001, which encodes a bifunctional AAC(6')-APH(2") modifying enzyme, is flanked by two 1324-bp inverted repeats, IS256L and IS256R, that are identical in sequence. Analysis of the IS256 sequence revealed structural features characteristic of IS elements including 26-bp imperfect terminal inverted repeats and a single open reading frame with coding capacity for a 45.6 kDa protein. The nucleotide sequence of IS256 described here, together with the sequence of the aacA-aphD gene reported previously [Rouch et al., J. Gen. Microbiol. 133 (1987) 3039-3052], completes the entire sequence of Tn4001, which totals 4566 bp.