A captured folding intermediate involved in dimerization and domain-swapping of GB1

Immunoglobulin binding domain B1 of streptococcal protein G (GB1), a small (56 residues), stable, single domain protein, is one of the most extensively used model systems in the area of protein folding and design. The recently determined NMR structure of a quadruple mutant (HS#124F26A, L5V/F30V/Y33F/A34F) revealed a domain-swapped dimer that dissociated into a partially folded, monomeric species at low micromolar protein concentrations. Here, we have characterized this monomeric, partially folded species by NMR and show that extensive conformational heterogeneity for a substantial portion of the polypeptide chain exists. Exchange between the conformers within the monomer ensemble on the microsecond to millisecond timescale renders the majority of backbone amide resonances broadened beyond detection. Despite these extensive temporal and spatial fluctuations, the overall architecture of the monomeric mutant protein resembles that of wild-type GB1 and not the monomer unit of the domain-swapped dimer.     

Formation and carbon monoxide‐dependent dissociation of Allochromatium vinosum cytochrome c′ oligomers using domain‐swapped dimers

The number of artificial protein supramolecules has been increasing; however, control of protein oligomer formation remains challenging. Cytochrome c′ from Allochromatium vinosum (AVCP) is a homodimeric protein in its native form, where its protomer exhibits a four‐helix bundle structure containing a covalently bound five‐coordinate heme as a gas binding site. AVCP exhibits a unique reversible dimer–monomer transition according to the absence and presence of CO. Herein, domain‐swapped dimeric AVCP was constructed and utilized to form a tetramer and high‐order oligomers. The X‐ray crystal structure of oxidized tetrameric AVCP consisted of two monomer subunits and one domain‐swapped dimer subunit, which exchanged the region containing helices αA and αB between protomers. The active site structures of the domain‐swapped dimer subunit and monomer subunits in the tetramer were similar to those of the monomer subunits in the native dimer. The subunit–subunit interactions at the interfaces of the domain‐swapped dimer and monomer subunits in the tetramer were also similar to the subunit–subunit interaction in the native dimer. Reduced tetrameric AVCP dissociated to a domain‐swapped dimer and two monomers upon CO binding. Without monomers, the domain‐swapped dimers formed tetramers, hexamers, and higher‐order oligomers in the absence of CO, whereas the oligomers dissociated to domain‐swapped dimers in the presence of CO, demonstrating that the domain‐swapped dimer maintains the CO‐induced subunit dissociation behavior of native ACVP. These results suggest that protein oligomer formation may be controlled by utilizing domain swapping for a dimer–monomer transition protein.     

Chain termini cross-talk in the swapping process of bovine pancreatic ribonuclease

3D domain swapping is the process by which two or more protein molecules exchange part of their structure to form intertwined dimers or higher oligomers. Bovine pancreatic ribonuclease (RNase A) is able to swap the N-terminal α-helix (residues 1-13) and/or the C-terminal β-strand (residues 116-124), thus forming a variety of oligomers, including two different dimers. Cis-trans isomerization of the Asn113-Pro114 peptide group was observed when the protein formed the C-terminal swapped dimer. To study the effect of the substitution of Pro114 on the swapping process of RNase A, we have prepared and characterized the P114A monomeric and dimeric variants of the enzyme. In contrast with previous reports, the crystal structure and NMR data on the monomer reveals a mixed cis-trans conformation for the Asn113-Ala114 peptide group, whereas the X-ray structure of the C-terminal swapped dimer of the variant is very close to that of the corresponding dimer of RNase A. The mutation at the C-terminus affects the capability of the N-terminal α-helix to swap and the stability of both dimeric forms. The present results underscore the importance of the hydration shell in determining the cross-talk between the chain termini in the swapping process of RNase A.     

3D domain swapping: a mechanism for oligomer assembly.

3D domain swapping is a mechanism for forming oligomeric proteins from their monomers. In 3D domain swapping, one domain of a monomeric protein is replaced by the same domain from an identical protein chain. The result is an intertwined dimer or higher oligomer, with one domain of each subunit replaced by the identical domain from another subunit. The swapped "domain" can be as large as an entire tertiary globular domain, or as small as an alpha-helix or a strand of a beta-sheet. Examples of 3D domain swapping are reviewed that suggest domain swapping can serve as a mechanism for functional interconversion between monomers and oligomers, and that domain swapping may serve as a mechanism for evolution of some oligomeric proteins. Domain-swapped proteins present examples of a single protein chain folding into two distinct structures.     

Deswapping bovine odorant binding protein

The X-ray structure of bovine Odorant Binding Protein (bOBP) revealed its association as a domain swapped dimer. bOBP, devoid of any cysteines, contrasts with other mammalian OBPs, which are monomeric and possess at least one disulfide bridge. We have produced a mutant of bOBP in which a glycine residue was inserted after position 121. This mutation yielded a monomeric bOBP-121Gly+ in which domain swapping has been reverted. Here, we have subsequently introduced two mutations, Trp64Cys and His155Cys, in view to stabilize the putative monomer with a disulfide bridge. We have determined the crystal structure of this triple mutant at 1.65 A resolution. The mutant protein is monomeric, stabilized by a disulfide bridge between Trp64Cys and His155Cys, with a backbone superimposable to that of native bOBP, with the exception of the hinge and of the 10 residues at the C-terminus. bOBP triple mutant binds 1-amino-anthracene, 1-octen-3-ol (bOBP co-purified ligand) and other ligands with microM Kd values comparable to those of the swapped dimer.     

Amino‐acid composition after loop deletion drives domain swapping

Rational engineering of a protein to enable domain swapping requires an understanding of the sequence, structural and energetic factors that favor the domain‐swapped oligomer over the monomer. While it is known that the deletion of loops between β‐strands can promote domain swapping, the spliced sequence at the position of the loop deletion is thought to have a minimal role to play in such domain swapping. Here, two loop‐deletion mutants of the non‐domain‐swapping protein monellin, frame‐shifted by a single residue, were designed. Although the spliced sequence in the two mutants differed by only one residue at the site of the deletion, only one of them (YEIKG) promoted domain swapping. The mutant containing the spliced sequence YENKG was entirely monomeric. This new understanding that the domain swapping propensity after loop deletion may depend critically on the chemical composition of the shortened loop will facilitate the rational design of domain swapping.     

Structure of the monomeric 8-kDa dynein light chain and mechanism of the domain-swapped dimer assembly

The 8-kDa light chain of dynein (DLC8) is ubiquitously expressed in various cell types. Other than serving as a light chain of the dynein complexes, this highly conserved protein has been shown to bind a larger number of proteins with diverse biological functions. DLC8 forms a homodimer via three-dimensional domain swapping of an internal beta-strand (the beta2-strand) at neutral pH. The protein undergoes non-reversible dimer-to-monomer dissociation when the pH value of the protein solution decreases. The three-dimensional structure of the DLC8 monomer determined by NMR spectroscopy at pH 3.0 showed that the protein is well folded. The major conformational change accompanied by dimer dissociation is in the beta2-strand of the protein, which undergoes transition from a beta-strand to a nascent alpha-helix. The monomer form of DLC8 is not capable of binding to target proteins. Insertion of two flexible amino acid residues in the tight beta1/beta2-loop dramatically stabilized the monomer conformation of the protein. NMR studies showed that the mutation altered the conformation as well as the three-dimensional domain swapping-mediated assembly of the DLC8 dimer. The mutant DLC8 was unable to bind to its targets even at physiological pH. The three-dimensional structure of the mutant protein in its monomeric form provides the structural basis of the mutation-induced stabilization of the monomer conformation. Based on the experimental data, we conclude that the formation of the beta2-strand swapping-mediated dimer is mandatory for the structure and function of DLC8. We further note that the DLC8 dimer represents a novel mode of three-dimensional domain swapping.     

Solution NMR study of the monomeric form of p13suc1 protein sheds light on the hinge region determining the affinity for a phosphorylated substrate.

Cyclin-dependent kinase subunit (CKS) proteins bind to cyclin-dependent kinases and target various proteins to phosphorylation and proteolysis during cell division. Crystal structures showed that CKS can exist both in a closed monomeric conformation when bound to the kinase and in an inactive C-terminal beta-strand-exchanged conformation. With the exception of the hinge loop, however, both crystal structures are identical, and no new protein interface is formed in the dimer. Protein engineering studies have pinpointed the crucial role of the proline 90 residue of the p13(suc1) CKS protein from Schizosaccharomyces pombe in the monomer-dimer equilibrium and have led to the concept of a loaded molecular spring of the beta-hinge motif. Mutation of this hinge proline into an alanine stabilizes the protein and prevents the occurrence of swapping. However, other mutations further away from the hinge as well as ligand binding can equally shift the equilibrium between monomer and dimer. To address the question of differential affinity through relief of the strain, here we compare the ligand binding of the monomeric form of wild-type S. pombe p13(suc1) and its hinge mutant P90A in solution by NMR spectroscopy. We indeed observed a 5-fold difference in affinity with the wild-type protein being the most strongly binding. Our structural study further indicates that both wild-type and the P90A mutant proteins adopt in solution the closed conformation but display different dynamic properties in the C-terminal beta-sheet involved in domain swapping and protein interactions.     

Crystal structure of cyanovirin-N, a potent HIV-inactivating protein, shows unexpected domain swapping.

The crystal structure of cyanovirin-N (CV-N), a protein with potent antiviral activity, was solved at 1.5 A resolution by molecular replacement using as the search model the solution structure previously determined by NMR. The crystals belong to the space group P3221 with one monomer of CV-N in each asymmetric unit. The primary structure of CV-N contains 101 residues organized in two domains, A (residues 1 to 50) and B (residues 51 to 101), with a high degree of internal sequence and structural similarity. We found that under the conditions of the crystallographic experiments (low pH and 26 % isopropanol), two symmetrically related monomers form a dimer by domain swapping, such that domain A of one monomer interacts with domain B' of its crystallographic symmetry mate and vice versa. Because the two swapped domains are distant from each other, domain swapping does not result in additional intramolecular interactions. Even though one of the protein sample solutions that was used for crystallization clearly contained 100 % monomeric CV-N molecules, as judged by various methods, we were only able to obtain crystals containing domain-swapped dimers. With the exception of the unexpected phenomenon of domain swapping, the crystal structure of CV-N is very similar to the NMR structure, with a root-mean-square deviation of 0.55 A for the main-chain atoms, the best agreement reported to date for structures solved using both techniques.     

Energetic Calculations to Decipher pH-Dependent Oligomerization and Domain Swapping of Proteins

Domain swapping mechanism is a specialised mode of oligomerization of proteins in which part of a protein is exchanged in a non-covalent manner between constituent subunits. This mechanism is highly affected by several physiological conditions. Here, we present a detailed analysis ofthe effect of pH on different regions of the domain swapped oligomer by considering examples which are known to be sensitive to pH in transiting from monomeric to domain-swapped dimeric form. The energetic calculations were performed using a specialized method which considers changes in pH and subsequent changes in the interactions between subunits. This analysis provides definitive hints about the pH-dependence switch from monomer to domain-swapped oligomer and the steps that may be involved in the swapping mechanism.     

A Hinge Region cis-Proline in Ribonuclease A Acts as a Conformational Gatekeeper for C-Terminal Domain Swapping

Domain swapping, the process in which a structural unit is exchanged between monomers to create a dimer containing two subunits of the monomeric fold, is believed to be an important mechanism for oligomerization and the formation of amyloid fibrils. Structural studies have implicated proline as an important residue for domain swapping due to its increased frequency in hinge regions preceding swapped arms. We hypothesized that proline's unique ability to populate both cis and trans peptide bond conformations may allow proline to act as a conformational gatekeeper, regulating interconversion between monomer and domain-swapped dimer forms. The hinge region of RNase A contains a proline at residue 114 that adopts a cis conformation in the monomer and extends to a trans conformation in the C-terminal domain-swapped dimer. Substitution of P114 with residues that strongly prefer a trans peptide bond (Ala, Gly) results in significant population of the C-terminal domain-swapped dimer under near-physiological conditions (pH 8.0, 37 °C). This is in stark contrast to dimerization of wild-type RNase A, which requires incubation under extreme conditions such as lyophilization from acetic acid or elevated temperature. In addition, we observe similar results when cis-P114 is mutated to glycine in a homologous RNase, human pancreatic RNase 1. Our results suggest that isomerization at P114 may facilitate population of a partially unfolded intermediate or alternative structure competent for domain swapping and provide support for a more general role for proline isomerization as a conformational gatekeeper in domain swapping and oligomerization.     

Appendant structure plays an important role in amyloidogenic cystatin dimerization prior to domain swapping

It has been hypothesized that prior to protein domain swapping, unfolding occurs in regions important for the stability of the native monomeric structure, which probably increases the possibility of intermolecular interaction. In order to explore the detailed information of the important unfolding regions in cystatin prior to domain swapping, 20?ns molecular dynamic simulations were performed at atomic level with typical amyloidogenic chicken cystatin (cC) mutant I66Q monomer under conditions that enable forming amyloid fibrils in biological experiments. Our results showed that I66Q mutant exhibited relatively large secondary structure changes and obvious expanding tendency of hydrophobic core compared to wild-type cC. More importantly, the appendant structure (AS) showed a large displacement and distortion towards the hydrophobic core in amyloidogenic cystatin. The structural analysis on cystatin monomer suggested that structural changes of the AS might make the hydrophobic core expand more easily. In addition, analysis on docking dimer has shown that the distorted AS was favor to intermolecular interactions between two cystatin monomers. Data from an independent theoretical derived algorithm as well as biological experiments also support this hypothesis.     

Appendant structure plays an important role in amyloidogenic cystatin dimerization prior to domain swapping

It has been hypothesized that prior to protein domain swapping, unfolding occurs in regions important for the stability of the native monomeric structure, which probably increases the possibility of intermolecular interaction. In order to explore the detailed information of the important unfolding regions in cystatin prior to domain swapping, 20?ns molecular dynamic simulations were performed at atomic level with typical amyloidogenic chicken cystatin (cC) mutant I66Q monomer under conditions that enable forming amyloid fibrils in biological experiments. Our results showed that I66Q mutant exhibited relatively large secondary structure changes and obvious expanding tendency of hydrophobic core compared to wild-type cC. More importantly, the appendant structure (AS) showed a large displacement and distortion towards the hydrophobic core in amyloidogenic cystatin. The structural analysis on cystatin monomer suggested that structural changes of the AS might make the hydrophobic core expand more easily. In addition, analysis on docking dimer has shown that the distorted AS was favor to intermolecular interactions between two cystatin monomers. Data from an independent theoretical derived algorithm as well as biological experiments also support this hypothesis.     

A protein contortionist: core mutations of GB1 that induce dimerization and domain swapping

Immunoglobulin-binding domain B1 of streptococcal protein G (GB1), a small (56 residues), stable, single-domain protein, is one of the most extensively used model systems in the area of protein folding and design. Recently, NMR and X-ray structures of a quintuple GB1 core mutant (L5V/A26F/F30V/Y33F/A34F) that showed an unexpected, intertwined tetrameric architecture were determined. Here, we report the NMR structure of another mutant, derived from the tetramer by reverting the single amino acid position F26 back to the wild-type sequence A26. The structure reveals a domain-swapped dimer that involves exchange of the second beta-hairpin. The resulting overall structure comprises an eight-stranded beta-sheet whose concave side is covered by two alpha helices. The dimer dissociates into a partially folded, monomeric species with a dissociation constant of 93(+/-10)microM.     

Construction and characterization of beta-lactoglobulin chimeras

At neutral pH, equine beta-lactoglobulin (ELG) is monomeric, whereas bovine beta-lactoglobulin (BLG) exists as a dimer. To understand the difference in the oligomerization properties between ELG and BLG, three mutants of ELG (LP, I, and LPI) were constructed by substituting amino acids responsible for important interactions at the dimer interface of BLG into ELG. The mutant LP has an AB loop mutation (S34A/E35Q), the mutant I has an I strand mutation (G145M/R146H/V147I/Q148R/I149L/V150S/P151F/D152N/L153P) and the mutant LPI includes both the LP and I mutations. The far- and near-UV CD spectra of the three mutants are similar to that of the wild-type ELG, indicating that the secondary and the tertiary structures of ELG are not significantly affected by the mutations. Ultracentrifuge analysis shows that all three mutants are monomeric at neutral pH, suggesting that the protein sequences in the AB loop and I strand of BLG alone cannot support dimerization of ELG. Thus, structural differences must exist between ELG and BLG that prevent the ELG mutants from forming the same interactions as BLG at the dimer interface.     

Dimerization of Crh by reversible 3D domain swapping induces structural adjustments to its monomeric homologue Hpr

The crystal structure of the regulatory protein Crh from Bacillus subtilis was solved at 1.8A resolution and showed an intertwined dimer formed by N-terminal beta1-strand swapping of two monomers. Comparison with the monomeric NMR structure of Crh revealed a domain swap induced conformational rearrangement of the putative interaction site with the repressor CcpA. The resulting conformation closely resembles that observed for the monomeric Crh homologue HPr, indicating that the Crh dimer is the active form binding to CcpA. An analogous dimer of HPr can be constructed without domain swapping, suggesting that HPr may dimerize upon binding to CcpA. Our data suggest that reversible 3D domain swapping of Crh might be an efficient regulatory mechanism to modulate its activity.     

Molecular mechanism of domain swapping in proteins: an analysis of slower motions

Domain swapping is a structural phenomenon that plays an important role in the mechanism of oligomerization of some proteins. The monomer units in the oligomeric structure become entangled with each other. Here we investigate the mechanism of domain swapping in diphtheria toxin and the structural criteria required for it to occur by analyzing the slower modes of motion with elastic network models, Gaussian network model and anisotropic network model. We take diphtheria toxin as a representative of this class of domain-swapped proteins and show that the domain, which is being swapped in the dimeric state, rotates and twists, in going from the "open" to the "closed" state, about a hinge axis that passes through the middle of the loop extending between two domains. A combination of the intra- and intermolecular contacts of the dimer is almost equivalent to that of the monomer, which shows that the relative orientations of the residues in both forms are almost identical. This is also reflected in the calculated B-factors when compared with the experimentally determined B-factors in x-ray crystal structures. The slowest modes of both the monomer and dimer show a common hinge centered on residue 387. The differences in distances between the monomer and the dimer also shows the hinge at nearly the same location (residue 381). Finally, the first three dominant modes of anisotropic network model together shows a twisting motion about the hinge centered on residue 387. We further identify the location of hinges for a set of another 12 domain swapped proteins and give the quantitative measures of the motions of the swapped domains toward their "closed" state, i.e., the overlap and correlation between vectors.     

Hinge-loop mutation can be used to control 3D domain swapping and amyloidogenesis of human cystatin C

Cystatins are natural inhibitors of cysteine proteases, enzymes that are widely distributed in animals, plants, and microorganisms. Human cystatin C (hCC) has been also recognized as an aggregating protein directly involved in the formation of pathological amyloid fibrils, and these amyloidogenic properties greatly increase in a naturally occurring L68Q hCC variant. For a long time only dimeric structure of wild-type hCC has been known. The dimer is created through 3D domain swapping process, in which two parts of the cystatin structure become separated from each other and next exchanged between two molecules. Important role in the domain swapping plays the L1 loop, which connects the exchanging segments and, upon dimerization, transforms from a β-turn into a part of a long β-strand. In the very recently published first monomeric structure of human cystatin C (hCC-stab1), dimerization was abrogated due to clasping of the β-strands from the swapping domains by an engineered disulfide bridge. We have designed and constructed another mutated cystatin C with the smallest possible structural intervention, that is a single-point mutation replacing hydrophobic V57 from the L1 loop by polar asparagine, known as a stabilizer of a β-turn motif. V57N hCC mutant occurred to be stable in its monomeric form and crystallized as a monomer, revealing typical cystatin fold with a five-stranded antiparallel β-sheet wrapped around an α-helix. Here we report a 2.04 Å resolution crystal structure of V57N hCC and discuss the architecture of the protein in comparison to chicken cystatin, hCC-stab1 and dimeric hCC.