Glycosylation profile and biological activity of Remicade® compared with Flixabi® and Remsima®

As biosimilars enter the market, comparisons of product quality are needed. Manufacturing differences may lead to differences in critical quality attributes, which affect efficacy. Therefore, critical quality attributes (structure and biological activity) of Remicade® and of 2 biosimilar products (Flixabi®/Renflexis® and Remsima®/Inflectra®) were determined. We assessed binding to tumor necrosis factor in a fluorescence competitive binding assay; potency in a luciferase reporter gene assay; percentages of galactosylated glycan, afucose plus high mannosylated glycans, and charged glycan; FcγRIIIa (CD16) binding (assessed by 3 methods); and antibody-dependent cell-mediated cytotoxicity (ADCC) in the NK92-CD16a cell line and in peripheral blood mononuclear cells (PBMC). The results of Fab-related activity were similar for all products. Compared with Remicade®, Flixabi® had a lower percentage of charged glycan, and Remsima® had a higher percentage of galactosylated glycan and a lower percentage of afucose plus high mannosylated glycans. Whereas Remsima® and Remicade® are expressed in a Sp2/0 cell line, Flixabi® is expressed in a CHO cell line. Despite this difference, galactosylated glycans from the 3 products were not correlated with the expression system. The results of all 3 methods used in this study indicated that FcγRIIIa binding was lower with Remsima® than with Remicade®. The percentage of ADCC in NK92-CD16a cells was lower with Remsima® and higher with Flixabi® compared with Remicade®, but was similar for all 3 products in PBMC. Surface expression of CD16 was 5.7-fold greater on NK92-CD16a cells than on PBMC. Combined percentages of afucosylated and high mannosylated glycans were positively correlated with FcγRIIIa binding and ADCC in NK92-CD16 cells, while no correlation was observed in PBMC.     

Osteoconductivity and osteoinductivity of NanoFUSE® DBM

Bone graft substitutes have become an essential component in a number of orthopedic applications. Autologous bone has long been the gold standard for bone void fillers. However, the limited supply and morbidity associated with using autologous graft material has led to the development of many different bone graft substitutes. Allogeneic demineralized bone matrix (DBM) has been used extensively to supplement autograft bone because of its inherent osteoconductive and osteoinductive properties. Synthetic and natural bone graft substitutes that do not contain growth factors are considered to be osteoconductive only. Bioactive glass has been shown to facilitate graft containment at the operative site as well as activate cellular osteogenesis. In the present study, we present the results of a comprehensive in vitro and in vivo characterization of a combination of allogeneic human bone and bioactive glass bone void filler, NanoFUSE^® DBM. NanoFUSE^® DBM is shown to be biocompatible in a number of different assays and has been cleared by the FDA for use in bone filling indications. Data are presented showing the ability of the material to support cell attachment and proliferation on the material thereby demonstrating the osteoconductive nature of the material. NanoFUSE^® DBM was also shown to be osteoinductive in the mouse thigh muscle model. These data demonstrate that the DBM and bioactive glass combination, NanoFUSE^® DBM, could be an effective bone graft substitute.     

Taxonomical classification and origin of Kamut® wheat

Bioagriculture and healthy lifestyle are trends of the twenty-first century. Bioagriculture involves the breeding of crops without using modern synthetic substances. Kamut brand wheat is one of the popular biocereals grown mainly in the USA and Europe. This cereal has the status of ancient wheat, not only because it has been grown since the era of the ancient Egyptian civilization, but also for its properties favorable for modern breeding programs and modern food marketing. In spite of Kamut’s^® interesting history and stable place in the market, it is not a common subject of genetic studies. It is also interesting that it has not been successfully taxonomically classified yet. There are a few studies which classify this tetraploid wheat as Triticum polonicum L., T. turanicum Jakubz., T. turgidum L. and T. durum Desf. These studies are based on cytological and comparative methods. We chose molecular (transposable element resistance gene analog polymorphism, diversity arrays technology, sequencing of genes SBEIIa, and ψLpx-A1_like) and statistical methods to classify Kamut^® wheat. According to our experiments we suggest that Kamut brand wheat originated as a natural hybrid between Triticum dicoccon conv. dicoccon and T. polonicum and is not original ancient Egyptian wheat. We suggest that Etruscan wheat has the same parents as Kamut^®.     

Formulation and <Emphasis Type="Italic">In vitro</Emphasis> Characterization of Eudragit® L100 and Eudragit® L100-PLGA Nanoparticles Containing Diclofenac Sodium

The aim of this study was to formulate and characterize Eudragit® L100 and Eudragit® L100-poly(lactic-co-glycolic acid) (PLGA) nanoparticles containing diclofenac sodium. Diclofenac generates severe adverse effects with risks of toxicity. Thus, nanoparticles were prepared to reduce these drawbacks in the present study. These nanoparticles were evaluated for surface morphology, particle size and size distribution, percentage drug entrapment, and in vitro drug release in pH 6.8. The prepared nanoparticles were almost spherical in shape, as determined by atomic force microscopy. The nanoparticles with varied size (241–274 nm) and 25.8–62% of entrapment efficiency were obtained. The nanoparticles formulations produced the release profiles with an initial burst effect in which diclofenac sodium release ranged between 38% and 47% within 4 h. The extent of drug release from Eudragit® L100 nanoparticles was up to 92% at 12 h. However, Eudragit®/PLGA nanoparticles showed an initial burst release followed by a slower sustained release. The cumulative release at 72 h was 56%, 69%, and 81% for Eudragit®/PLGA (20:80), Eudragit®/PLGA (30:70) and Eudragit®/PLGA (50:50) nanoparticles, respectively. The release profiles and encapsulation efficiencies depended on the amount of Eudragit in the blend. These data demonstrated the efficacy of these nanoparticles in sustaining the diclofenac sodium release profile.     

Response of the ArcCHECK® device at 6 MV and 15 MV for VMAT and IMRT quality control

PurposeTo study the response of the ArcCHECK® device as VMAT and IMRT verification system.MethodsVarious tests analyzing the linearity, the repeatability and the angular dependence of the device response, its dependence with the pulse repetition rate and the leakage losses were performed. The long-term response in dose measurements and the uniformity of the detectors conforming the system were controlled using a statistical process control program. The Elekta Infinity™ 6 and 15 MV photon beams were used.ResultsThe device showed excellent repeatability and linearity. The differences between the responses obtained for any pair of angular incidences were less than 2%. The absorbed dose increased by 3% when the pulse repetition rate varied from 50 to 600 MU/min. Results are in overall agreement with those found in previous works for the ArcCHECK®, in which a reduced number of the device diodes were analyzed, and for the MapCheck®, an older 2D device that used the same diodes. Charge losses were found to be negligible except for some of the diodes of the device. The statistical process control program is a very useful tool to control the correct functioning of the device in the long term.ConclusionsThe results of the analysis carried out indicate that the working and stability conditions of the ArcCHECK® device are adequate for its purpose. The dependence with the pulse repetition rate should be considered when VMAT or similar treatments are evaluated. A control program for the statistical monitoring of the device would be desirable and useful.     

Synthesis and characterization of pHLIP® coated gold nanoparticles

Novel approaches in synthesis of spherical and multispiked gold nanoparticles coated with polyethylene glycol (PEG) and pH Low Insertion Peptide (pHLIP^®) were introduced. The presence of a tumor-targeting pHLIP^® peptide in the nanoparticle coating enhances the stability of particles in solution and promotes a pH-dependent cellular uptake. The spherical particles were prepared with sodium citrate as a gold reducing agent to form particles of 7.0±2.5 nm in mean metallic core diameter and ～43 nm in mean hydrodynamic diameter. The particles that were injected into tumors in mice (21 µg of gold) were homogeneously distributed within a tumor mass with no staining of the muscle tissue adjacent to the tumor. Up to 30% of the injected gold dose remained within the tumor one hour post-injection. The multispiked gold nanoparticles with a mean metallic core diameter of 146.0±50.4 nm and a mean hydrodynamic size of ~161 nm were prepared using ascorbic acid as a reducing agent and disk-like bicelles as a template. Only the presence of a soft template, like bicelles, ensured the appearance of spiked nanoparticles with resonance in the near infrared region. The irradiation of spiked gold nanoparticles by an 805 nm laser led to the time- and concentration-dependent increase of temperature. Both pHLIP^® and PEG coated gold spherical and multispiked nanoparticles might find application in radiation and thermal therapies of tumors.     

Anti-staphylococcal effect of enterocin in Sunar® and yogurt

Enterocin was used to control the growth of Staphylococcus aureus strains SA1 and Oxford 209P in Sunar (milk nourishment for suckling babies) and during the yogurt-making process. Reduction by three orders of magnitude was noted in the growth of SA1 strain in Sunar milk nourishment between the enterocin-containing (ES) and the control samples (CS) at 1-d cultivation. An inhibitory effect of enterocin was observed when surviving of SA1 cells were checked 6 h after the start of cultivation (2 h after enterocin application; enterocin was applied after 4 h). Decrease in the count of Oxford 209P strain in yogurt was detected in ES after 1 d of storage in comparison with CS (10(3) and 10(0) CFU mL-1 g-1). Thus a decrease by three orders of magnitude was found between ES and CS at the time mentioned. On the other hand, no bacteriocin activity was detected in ES after 1 d. Activity was detected only immediately after enterocin addition to ES (400 AU/mL) as well as after 1 and 3 1/2 h (200 AU/mL). Although the slight regrowth of the indicator was obtained up to 1 week of yogurt storage, the difference between ES and CS persisted. The lowest pH of the final yogurt product was noted in the reference yogurt sample but differences among the pH values of yogurt samples were not significant.     

Advanced assessment of the physicochemical characteristics of Remicade® and Inflectra® by sensitive LC/MS techniques

In this study, we demonstrate the utility of ultra-performance liquid chromatography coupled to mass spectrometry (MS) and ion-mobility spectrometry (IMS) to characterize and compare reference and biosimilar monoclonal antibodies (mAbs) at an advanced level. Specifically, we focus on infliximab and compared the glycan profiles, higher order structures, and their host cell proteins (HCPs) of the reference and biosimilar products, which have the brand names Remicade® and Inflectra®, respectively. Overall, the biosimilar attributes mirrored those of the reference product to a very high degree. The glycan profiling analysis demonstrated a high degree of similarity, especially among the higher abundance glycans. Some differences were observed for the lower abundance glycans. Glycans terminated with N-glycolylneuraminic acid were generally observed to be at higher normalized abundance levels on the biosimilar mAb, while those possessing α-linked galactose pairs were more often expressed at higher levels on the reference molecule. Hydrogen deuterium exchange (HDX) analyses further confirmed the higher-order similarity of the 2 molecules. These results demonstrated only very slight differences between the 2 products, which, interestingly, seemed to be in the area where the N-linked glycans reside. The HCP analysis by a 2D-UPLC IMS-MS approach revealed that the same 2 HCPs were present in both mAb samples. Our ability to perform these types of analyses and acquire insightful data for biosimilarity assessment is based upon our highly sensitive UPLC MS and IMS methods.     

IMRT/VMAT dose distributions generated for HD® and Millennium® collimators TrueBeam® and Clinac® accelerators

AimThe aim of this study is to answer the question whether the calculated dose distributions for HD and Millennium collimators (Varian Medical Systems) are equivalent for large treatment volumes.BackgroundModern biomedical linacs are equipped with multileaf collimators where leaves can be of different widths. Thinner leaves allow better fit to desired (tumor) shape. At the same time, however, the maximum size of the field that can be obtained with the collimator is also reduced. Varian Medical Systems HD and Millennium collimators can be a good sample. They have 40 cm or 22 cm × 40 cm maximal field size at the isocenter, respectively.Materials and methodsThis paper presents the comparison of selected statistical and dosimetric parameters achieved for treatment plans where the beams for a HD collimator had to be merged because of the size of the tumor volume.Results and discussionAchieved results show that, independently from irradiated volume, there is no statistically significant difference for calculated dose distributions, integral doses, MU values and coefficients evaluating dose distributions for HD and Millennium collimators.ConclusionsResults show that both types of collimators can be used interchangeably for preparing the treatment plans for large tumor volume without quality reduction of the prepared treatment plan.     

Effects of Phoslock® treatment and chironomids on the exchange of nutrients between sediment and water

Effects of chironomids on sediment–water exchange of nutrients and their impact on the efficiency of Phoslock^® (a lanthanum (La) modified clay for phosphorus (P) removal in freshwater systems) were tested during a 35 days incubation experiment with sediment cores from a Danish eutrophic Lake. Four different sediment treatments with increased or natural densities of chironomids in combination with Phoslock^® were used: (1) Control + (2) Chironomids + (3) Phoslock + (4) Chironomids & Phoslock. Nutrients in the overlying water were followed during the incubation period. The treatments with Phoslock reduced P in the overlying water significantly compared to the control treatment. In addition, the chironomids significantly increased sediment nitrate uptake as well as sediment ammonium release. After the incubation period, a sequential extraction of P and La was conducted. The Phoslock treatment led to a reduction of the iron-bound P pool in the sediment and a higher HCl-extractable P pool. Also, most La was recovered in the HCl extract, indicating that P became strongly bound to La in the Phoslock matrix. Sequential extraction of pure Phoslock demonstrated that the bentonite matrix of Phoslock contained redox sensitive iron, and that ammonium might be released from Phoslock, when dispersed in water.     

Molecular dynamics studies of the Nafion®, Dow® and Aciplex® fuel-cell polymer membrane systems

The Nafion, Dow and Aciplex systems – where the prime differences lies in the side-chain length – have been studied by molecular dynamics (MD) simulation under standard pressure and temperature conditions for two different levels of hydration: 5 and 15 water molecules per (H)SO₃ end-group. Structural features such as water clustering, water-channel dimensions and topology, and the dynamics of the hydronium ions and water molecules have all been analysed in relation to the dynamical properties of the polymer backbone and side-chains. It is generally found that mobility is promoted by a high water content, with the side-chains participating actively in the H₃O⁺/H₂O transport mechanism. Nafion, whose side-chain length is intermediate of the three polymers studied, is found to have the most mobile polymer side-chains at the higher level of hydration, suggesting that there could be an optimal side-chain length in these systems. There are also some indications that the water-channel network connectivity is optimal for high water-content Nafion system, and that this could explain why Nafion appears to exhibit the most favourable overall hydronium/water mobility. Figure The simulation box for Aciplex with 5 water molecules per sulphonate end-group (yellow spheres). The polymer backbone is black; while side-chains are brown. The water-channel iso-surfaces are represented as blue clouds     

Safety of the production process of SURFACEN® to inactivate and remove virus

SURFACEN^® is a biological product produced from pig lungs. Since these animals can be potential sources of microbial pathogens such as viruses, the manufacturing process of this product should guarantee safety from health hazards. The SURFACEN^® production procedure is capable of effective viral clearance (inactivation/removal) by involving two stages of organic solvent extraction followed by acetone precipitation and heat treatment. In this study, we evaluated the clearance capacity of these four stages for a wide range of viruses by performing spiking experiments. Residual contamination was assessed using a Tissue Culture Infectious Dose assay (log₁₀ TCID₅₀). The validation study demonstrated that, for all viruses tested, the TCID₅₀ titers were reduced by more than 2 log₁₀ in each stage. Total log reduction values achieved were between ≥17.82 log₁₀ and ≥27.93 log₁₀, depending on the virus physical properties, titer, and the number of processing stages applied. Results indicated that the production procedure of SURFACEN^® can inactivate or remove contaminant viruses from the raw material.     

Evaluation of two commercial methods for the susceptibility testing of Candida species: Vitek 2® and Sensititre YeastOne®

Background

An increased incidence of fungal infections caused by Candida species, especially Candida glabrata and Candida krusei, which are less susceptible to azoles, has been observed. Standardized susceptibility testing is essential for clinical management and for monitoring the epidemiology of resistance.

Comparison of the efficacy of long-lasting insecticidal nets PermaNet® 2.0 and Olyset® against Anopheles albimanus under laboratory conditions

Insecticide-treated nets provide a reduction in human-vector contact through physical barrier, mortality and/or repellent effects that protect both users and non-users, thereby protecting the wider community from vector-borne diseases like malaria. Long-lasting insecticide-treated nets (LLINs) are the best alternative. This study evaluated the bioefficacy of LLINs PermaNet? 2.0 and Olyset? under laboratory conditions with Anopheles albimanus. The laboratory strain was evaluated for insecticide susceptibility with selected insecticides used for malarial control. Regeneration time and wash resistance were evaluated with the standard bioassay cone technique following WHO guidelines. Heat assistance was used for Olyset? nets; the nets were exposed to four different temperatures to speed the regeneration process. The regeneration study of PermaNet? 2.0 showed that efficacy was fully recovered by 24 h after one and three washes and wash resistance persisted for 15 washes. Regeneration of Olyset? nets was not observed for nets washed three times, even with the different temperature exposures for up to seven days. Thus, for Olyset? the wash resistance evaluation could not proceed. Differences in response between the two LLINs may be associated with differences in manufacturing procedures and species response to the evaluated LLINs. PermaNet? 2.0 showed higher and continuous efficacy against An. albimanus.     

Bioactivity and viscoelastic characterization of chitosan/bioglass® composite membranes

Membranes of chitosan (CTS) and composite membranes of CTS with bioglass are prepared by solvent casting. The composite membranes are shown to induce the precipitation of apatite upon immersion in SBF. The biomineralization process is followed by measuring the variation of the viscoelastic properties of the membranes immersed in SBF, both online and offline. Non-conventional DMA is used to measure the change in the storage modulus, E', and the loss factor, tan δ, as a function of the immersion in SBF. A simple model is used to estimate the E' of the apatite layer formed in vitro that is about 130?MPa. This work shows that innovate mechanical tests can be useful to characterize the mechanical performance of composites under physiological conditions.     

Histochemical Demonstration of the Inhibitory Effect of Nuvan® and Neguvon® on Cholinesterase Activity in Pseudodactylogyrus anguillae (Monogenea)

The nervous system of Pseudodactylogyrus anguillae, a gill parasite from European eel (Anguilla anguilla) is demonstrated histochemically using the acetylthiocholine iodide method. It was shown that the staining of the nervous system was reduced or eliminated due to the inhibitory effect of Nuvan® and Neguvon®.     

A simple method of chymotrypsin concentration and purification from pancreas homogenate using Eudragit® L100 and Eudragit® S100

The condition of chymotrypsin (ChTRP)–Eudragit^® (Eu) insoluble complex formation was studied with the aim of applying this information to the separation of chymotrypsin from a crude filtrate of bovine pancreas homogenate. The optimal pH of the complex precipitation was 4.60 for ChTRP–Eudragit^® L100 and 5.40 for ChTRP–Eudragit^® S100. The polyelectrolyte concentration necessary for the commercial enzyme precipitation was lower than 0.1% (w/v). The complex formation was inhibited by NaCl for both polyelectrolytes. The method was applied to recover the enzyme from bovine homogenate; ChTRP was precipitated by Eudragit^® addition. The non-soluble complexes were separated by simple centrifugation and re-dissolved by a pH change to 8.20. The best conditions to recover ChTRP brought about a purification factor of around 4 and 90% yield.     

Prospects of PASylation® for the design of protein and peptide therapeutics with extended half-life and enhanced action

Pharmacokinetic (PK) extension is no longer just a means to create improved second generation biologics (so-called biobetters), but constitutes an accepted strategy in biopharmaceutical drug development today. Although PEGylation has become a widely applied methodology to furnish therapeutic proteins and peptides with prolonged plasma half-life, the immunogenicity and missing biodegradability of this synthetic polymer has prompted an evident need for alternatives. PASylation is based on biological polypeptides made of the small l-amino acids Pro, Ala and/or Ser (PAS), which adopt a random coil structure in aqueous buffers with surprisingly similar biophysical properties as PEG. In contrast, PAS sequences can be conjugated to pharmaceutically active proteins and peptides both via chemical coupling and at the genetic level, as so-called fusion proteins. PASylation has been successfully applied to numerous biologics, including cytokines, growth factors, antibody fragments, enzymes as well as various peptides, and validated in diverse animal models, from mice to monkeys. Here we compare PASylation with other current strategies for half-life extension and we discuss the utility of these approaches for the design of innovative peptide-based therapeutics.     

Development and validation of qualitative SYBR®Green Real-Time PCR for detection and discrimination of Listeria spp. and Listeria monocytogenes

A combination of four qualitative SYBR®Green qPCR screening assays targeting two levels of discrimination: Listeria genus (except Listeria grayi) and Listeria monocytogenes, is presented. These assays have been developed to be run simultaneously using the same polymerase chain reaction (PCR) programme. The paper also proposes a new validation procedure to specifically validate qPCR assays applied to food microbiology according to two guidelines: the ISO 22118 norm and the “Definition of minimum performance requirements for analytical methods of GMO testing”. The developed assays target the iap, prs and hlyA genes that belong to or neighbour the virulence cluster of Listeria spp. The selected primers were designed to amplify short fragments (60 to 103 bp) in order to obtain optimal PCR efficiency (between 97 and 107 % efficiency). The limit of detection of the SYBR®Green qPCR assays is two to five copies of target genes per qPCR reaction. These assays are highly accurate (98.08 and 100 % accuracy for the Listeria spp. and L. monocytogenes assays, respectively).