Increases in the intracellular concentration of glycerol during development in Myxococcus xanthus S. Courtney Frasch

Abstract The role of glycerol as a natural morphogen of myxospore formation in Myxococcus xanthus was examined. Glycerol was extracted from cells undergoing development and analyzed by gas chromatography. Glycerol is present in cells, and the intracellular level undergoes a series of transient increases during development. The data suggest a role for glycerol in myxosporulation and fruiting body morphogenesis supporting the notion that this chemical induction of sporulation may represent a physiological pathway in development.     

The Myxococcus xanthus lipopolysaccharide O-antigen is required for social motility and multicellular development

The gliding bacterium Myxococcus xanthus aggregates to form spore-filled fruiting bodies when nutrients are limiting. Defective fruiting-body formation and sporulation result from mutations in the sasA locus, which encodes the wzm wzt wbgA (formerly rfbABC ) lipopolysaccharide (LPS) O-antigen biosynthesis genes. Mutants carrying these same sasA mutations are defective in social motility and form small glossy colonies. We report here that the developmental and motility phenotypes of four mutants each containing different Tn 5 insertions in LPS O-antigen biosynthesis genes are similar to those of the original sasA locus mutants. All of the LPS O-antigen mutants tested exhibited defective developmental aggregation and sporulated at only 0.02–15% of the wild-type level. In addition, all of the LPS O-antigen mutants were determined by genetic analyses to be wild type for adventurous motility and defective in social motility, indicating that the LPS O-antigen is necessary for normal development and social motility. The two previously identified cell-surface components required for social motility, type IV pili and the protein-associated polysaccharide material termed fibrils, were detected on the surfaces of all of the LPS O-antigen mutants. This indicates that LPS O-antigen is a third cell-surface component required for social motility.     

The Myxococcus xanthus asgA gene encodes a novel signal transduction protein required for multicellular development.

The Myxococcus xanthus asgA gene is one of three known genes necessary for the production of extracellular A-signal, a cell density signal required early in fruiting body development. We determined the DNA sequence of asgA. The deduced 385-amino-acid sequence of AsgA was found to contain two domains: one homologous to the receiver domain of response regulators and the other homologous to the transmitter domain of histidine protein kinases. A kanamycin resistance (Kmr) gene was inserted at various positions within or near the asgA gene to determine the null phenotype. Those strains with the Kmr gene inserted upstream or downstream of asgA are able to form fruiting bodies, while strains containing the Kmr gene inserted within asgA fail to develop. The nature and location of the asgA476 mutation were determined. This mutation causes a leucine-to-proline substitution within a conserved stretch of hydrophobic residues in the N-terminal receiver domain. Cells containing the insertion within asgA and cells containing the asgA476 substitution have similar phenotypes with respect to development, colony color, and expression of an asg-dependent gene. An analysis of expression of a translational asgA-lacZ fusion confirms that asgA is expressed during growth and early development. Finally, we propose that AsgA functions within a signal transduction pathway that is required to sense starvation and to respond with the production of extracellular A-signal.     

黄色粘球菌发育阶段外膜蛋白表达的变化

【目的】黄色粘球菌是研究原核发育的一种模式生物,对其膜蛋白的研究仍然十分缺乏。【方法】利用6种预测软件,在黄色粘球菌的基因组中筛选编码外膜蛋白(OMP)的基因。根据报告基因lacZ,检测这些基因在营养性生长和发育阶段的表达。【结果】基于生物信息学分析,筛选出11个编码外膜蛋白的基因。其中2个基因(MXAN3106和MXAN3883)在发育阶段表达量上升,它们分别编码Secretin家族和Fimbrial usher protein (FUP)家族转运蛋白。其余9个基因在发育起始阶段表达量降低或保持较低水平,它们均编码TonB依赖型受体或外排蛋白。【结论】这些数据提示,黄色粘球菌由生长到发育的转换过程,伴随着膜蛋白表达的显著变化。     

Propionyl coenzyme A carboxylase is required for development of Myxococcus xanthus.

A dcm-1 mutant, obtained by transposon mutagenesis of Myxococcus xanthus, could aggregate and form mounds but was unable to sporulate under nutrient starvation. A sequence analysis of the site of insertion of the transposon showed that the insertion lies within the 3' end of a 1,572-bp open reading frame (ORF) designated the M. xanthus pccB ORF. The wild-type form of the M. xanthus pccB gene, obtained from a lambdaEMBL library of M. xanthus, shows extensive similarity to a beta subunit of propionyl coenzyme A (CoA) carboxylase, an alpha subunit of methylmalonyl-CoA decarboxylase, and a 12S subunit of transcarboxylase. In enzyme assays, extracts of the dcm-1 mutant were deficient in propionyl-CoA carboxylase activity. This enzyme catalyzes the ATP-dependent carboxylation of propionyl-CoA to yield methylmalonyl-CoA. The methylmalonyl-CoA rescued the dcm-1 mutant fruiting body and spore development. During development, the dcm-1 mutant cells also had reduced levels of long-chain fatty acids (C16 to C18) compared to wild-type cells.     

RasA is required for Myxococcus xanthus development and social motility

An insertion in the rasA gene entirely blocked developmental aggregation and sporulation in Myxococcus xanthus while also reducing swarm expansion on a 0.3% agar surface. Data presented here demonstrate that rasA is required for extracellular fibril formation and social gliding motility.     

The Myxococcus xanthus rfbABC operon encodes an ATP-binding cassette transporter homolog required for O-antigen biosynthesis and multicellular development.

A wild-type sasA locus is critical for Myxococcus xanthus multicellular development. Mutations in the sasA locus cause defective fruiting body formation, reduce sporulation, and restore developmental expression of the early A-signal-dependent gene 4521 in the absence of A signal. The wild-type sasA locus has been located on a 14-kb cloned fragment of the M. xanthus chromosome. The nucleotide sequence of a 7-kb region containing the complete sasA locus was determined. Three open reading frames encoded by the genes, designated rfbA, B and C were identified. The deduced amino acid sequences of rfbA and rfbB show identity to the integral membrane domains and ATPase domains, respectively, of the ATP-binding cassette (ABC) transporter family. The highest identities are to a set of predicted ABC transporters required for the biosynthesis of lipopolysaccharide O-antigen in certain gram-negative bacteria. The rfbC gene encodes a predicted protein of 1,276 amino acids. This predicted protein contains a region of 358 amino acids that is 33.8% identical to the Yersinia enterocolitica O3 rfbH gene product, which is also required for O-antigen biosynthesis. Immunoblot analysis revealed that the sasA1 mutant, which was found to encode a nonsense codon in the beginning of rfbA, produced less O-antigen than sasA+ strains. These data indicate that the sasA locus is required for the biosynthesis of O-antigen and, when mutated, results in A-signal-independent expression of 4521.     

一种粘细菌发育相关基因的分离及敲除分析

FruB是与粘细菌(Myxococcus xanthus)发育特异性转录因子FruA具有亲和力的蛋白因子,协同FruA参与对靶基因的调控。根据FruB氨基端氨基酸序列,设计简并性寡核苷酸引物对染色体DNA进行PCR扩增,以扩增产物为探针自粘细菌小型基因文库筛选出同源的4.5kb SacI阳性片段。fruB基因阻断分析表明,fruB功能缺失延缓子实体发育并降低粘孢子产率,提示fruB与粘细菌发育分化有一定联系。     

Genes required for both gliding motility and development in Myxococcus xanthus

Myxococous xanthus cells can glide both as individual cells, dependent on A dventurous motility (A motility), and as groups of cells, dependent upon S ocial motility (S motility), Tn5-lac mutagenesis was used to generate 16 new A^- and nine new S^- mutations. In contrast with previous results, we find that subsets of A^- mutants are defective in fruiting body morphogenesis and/or myxospore differentiation. All S^- mutants are defective in fruiting body morphogenesis, consistent with previous results. Whereas some S^- mutants produce a wild-type complement of spores, others are defective in the differentiation of myxospores. Therefore, a subset of the A genes and all of the S genes are critical for fruiting body morphogenesis. Subsets of both A and S genes are essential for sporulation. Three S::Tn5–lac insertions result in surprising phenotypes. Colonies of two S^- mutants glide on ‘swim’ (0.35% agar) plates to form fractal patterns. These S^- mutants are the first examples of a bacterium in which mutations result in fractal patterns of colonial spreading. An otherwise wild-type strain with one S^- insertion resembles the frz^- sglA1^- mutants upon development, suggesting that this S^- gene defines a new chemotaxis component in M. xanthus.     

Protein-protein interactions between two-component system transmitter and receiver domains of Myxococcus xanthus

We present a novel dataset assessing the specificity of protein-protein interactions between 69 transmitter and receiver domains from two-component system (TCS)-signalling pathways. TCS require a conserved protein-protein interaction between partner transmitter and receiver domains for signal transduction. The complex prokaryote Myxococcus xanthus possesses an unusually large number of TCS genes, many of which have no obvious interaction partners. Interactions between TCS domains of M. xanthus were assessed using a yeast two-hybrid assay, in which domains were expressed as both bait and prey translational fusions. LacZ production was monitored as an indicator of protein-protein interaction, and the strength of interactions classified as weak, medium or strong. Two-hundred and fifty-five transmitter-receiver domain interactions were observed (46 strong), allowing identification of potential signalling partners for individual M. xanthus TCS proteins. In addition, the dataset provides interesting 'meta' information. For instance, many strong interactions were identified between different transmitter domain pairs (34) and receiver domain pairs (23), suggesting a surprisingly large degree of heterodimerisation of these domains. Proteins in our dataset that exhibited similar 'profiles' of interactions, often shared a similar biological function, suggesting that interaction profiles can provide information on biological function, even considering sets of homologous domains.     

MlpA, a lipoprotein required for normal development of Myxococcus xanthus.

The mlpA gene encoding a 236-residue polypeptide has been identified immediately downstream of the oar gene of Myxococcus xanthus (M. Martinez-Canamero, J. Munoz-Dorado, E. Farez-Vidal, M. Inouye, and S. Inouye, J. Bacteriol. 175:4756-4763, 1993). The amino-terminal 21 residues of MlpA encode a typical prokaryotic signal sequence with a putative lipoprotein cleavage site. When expressed in Escherichia coli in the presence of [2-3H]glycerol, 3H-labeled MlpA had a molecular mass of 33 kDa and was found to be associated with the membrane fraction. Globomycin, an inhibitor of signal peptidase II, caused a shift in the mobility of E. coli-expressed MlpA to 35 kDa. Subsequently, a mlpA disruption strain (oar+) was constructed and found to have delayed fruiting body formation (by approximately 36 h), with significantly larger fruiting bodies being produced compared with those of the wild-type strain. Nevertheless, spore yields for the two strains were identical after 120 h of development. These data indicate that MlpA, the lipoprotein identified in M. xanthus, is required for normal fruiting body formation.     

The asgE locus is required for cell-cell signalling during Myxococcus xanthus development

In response to starvation, Myxococcus xanthus undergoes a multicellular developmental process that produces a dome-shaped fruiting body structure filled with differentiated cells called myxospores. Two insertion mutants that block the final stages of fruiting body morphogenesis and reduce sporulation efficiency were isolated and characterized. DNA sequence analysis revealed that the chromosomal insertions are located in open reading frames ORF2 and asgE, which are separated by 68 bp. The sporulation defect of cells carrying the asgE insertion can be rescued phenotypically when co-developed with wild-type cells, whereas the sporulation efficiency of cells carrying the ORF2 insertion was not improved when mixed with wild-type cells. Thus, the asgE insertion mutant appears to belong to a class of developmental mutants that are unable to produce cell-cell signals required for M. xanthus development, but they retain the ability to respond to them when they are provided by wild-type cells. Several lines of evidence indicate that asgE cells fail to produce normal levels of A-factor, a cell density signal. A-factor consists of a mixture of heat-stable amino acids and peptides, and at least two heat-labile extracellular proteases. The asgE mutant yielded about 10-fold less heat-labile A-factor and about twofold less heat-stable A-factor than wild-type cells, suggesting that the primary defect of asgE cells is in the production or release of heat-labile A-factor.     

Intra- and interprotein phosphorylation between two-hybrid histidine kinases controls Myxococcus xanthus developmental progression

Histidine-aspartate phosphorelay signaling systems are used to couple stimuli to cellular responses. A hallmark feature is the highly modular signal transmission modules that can form both simple "two-component" systems and sophisticated multicomponent systems that integrate stimuli over time and space to generate coordinated and fine-tuned responses. The deltaproteobacterium Myxococcus xanthus contains a large repertoire of signaling proteins, many of which regulate its multicellular developmental program. Here, we assign an orphan hybrid histidine protein kinase, EspC, to the Esp signaling system that negatively regulates progression through the M. xanthus developmental program. The Esp signal system consists of the hybrid histidine protein kinase, EspA, two serine/threonine protein kinases, and a putative transport protein. We demonstrate that EspC is an essential component of this system because ΔespA, ΔespC, and ΔespA ΔespC double mutants share an identical developmental phenotype. Neither substitution of the phosphoaccepting histidine residue nor deletion of the entire catalytic ATPase domain in EspC produces an in vivo mutant developmental phenotype. In contrast, substitution of the receiver phosphoaccepting residue yields the null phenotype. Although the EspC histidine kinase can efficiently autophosphorylate in vitro, it does not act as a phosphodonor to its own receiver domain. Our in vitro and in vivo analyses suggest the phosphodonor is instead the EspA histidine kinase. We propose EspA and EspC participate in a novel hybrid histidine protein kinase signaling mechanism involving both inter- and intraprotein phosphotransfer. The output of this signaling system appears to be the combined phosphorylated state of the EspA and EspC receiver modules. This system regulates the proteolytic turnover of MrpC, an important regulator of the developmental program.     

Myxococcus xanthus twin-arginine translocation system is important for growth and development

The twin-arginine translocation (Tat) system serves to export fully folded proteins across the cytoplasmic membrane. In many bacteria, three major components, TatA, TatB and TatC, are the functionally essential constituents of the Tat system. A Myxococcus xanthus tatB–tatC deletion mutant could aggregate and form mounds, but was unable to form fruiting bodies under nutritionally limiting conditions. When tatB–tatC mutant vegetative cells were cultured with 0.5 M glycerol, the cell morphology changed to spore-like spherical cells, but the spores were not resistant to heat and sonication treatments. In contrast to the wild-type strain, the tatB–tatC mutant also showed a decreased cell growth rate and a lower maximum cell concentration. These results suggest possibility that the Tat system may contribute to export of various important proteins for development and growth for M. xanthus.     

A-signalling and the cell density requirement for Myxococcus xanthus development.

Mutations in any of three asg (A-signalling) loci cause fruiting body development of Myxococcus xanthus to arrest at about the 2-h stage. Development can be restored to asg mutants by the addition of conditioned buffer in which wild-type cells have been developing or of A-factor purified from the conditioned buffer. Two forms of A-factor have been identified: heat-stable A-factor, which is composed of amino acids and peptides, and heat-labile A-factor, which consists of at least two proteases. A-factor is found in conditioned buffer in rough proportion to the cell density. As decreasing amounts of either form of A-factor are added, the developmental response of asg cells decreases until a threshold concentration is reached, below which no response is detected. In addition, wild-type cells fail to develop when their density is decreased below the point at which the level of A-factor is predicted to fall short of this threshold. The development of low-density asg+ cells can, however, be restored by the addition of either form of A-factor. These experiments show that A-factor is important for the development of wild-type cells. Moreover, the development of an asgB mutant that produces 5 to 10% the wild-type level of A-factor can be restored when the cell density is increased 10-fold above the standard density. We propose that the A-signal is used by M. xanthus to specify the minimum cell density required for the initiation of development. Differences in the response to A-factor between different asg mutants suggest that the different asg loci govern A-factor production in diverse ways.     

Oar, a 115-kilodalton membrane protein required for development of Myxococcus xanthus.

Myxococcus xanthus is a developmental gram-negative bacterium which forms multicellular fruiting bodies upon nutrient starvation. This bacterium was found to contain a 115-kDa membrane protein which separated with the inner membrane fraction by sucrose density gradient centrifugation. The gene for this protein was cloned, and its DNA sequence was determined. The deduced amino acid sequence consists of 1,061 residues. This protein contains a putative signal sequence and many short segments, found scattered throughout the entire protein, that have sequence similarities with OmpA, a major outer membrane protein of Escherichia coli. Thus, the gene was designated oar (OmpA-related protein). A second open reading frame was found 36 bases downstream of the oar termination codon. This open reading frame encodes a protein of 236 residues and contains a putative lipoprotein signal sequence. An aor disruption mutation (delta oar) showed no effect on vegetative growth but caused abnormal morphogenesis during development and reduced myxospore formation. When examined with a light microscope, delta oar cells were unable to aggregate on developmental agar, indicating that Oar is required for cellular adhesiveness during development.     

Effects of heat shock upon the expression of developmentally regulated genes in Myxococcus xanthus

Abstract The effects of heat shock upon the expression of several developmentally regulated genes of Myxococcus xanthus were examined. No effects were observed on levels or timing of developmentally regulated β-galactosidase expression in eight randomly selected Tn5lac insertion mutants. However, heat shock significantly affected the fruiting behavior of temperature-sensitive aggregation ( tag ) mutants of M. xanthus . The tag mutant phenotype exhibits the normal aggregation of cells to form fruiting bodies at temperatures < 34°C, but cells fail to aggregate at temperatures ⩾ 34°C. Heat shock administered to tag mutant strains prior to starvation prohibited fruiting body formation at permissive temperatures. Additionally, tag mutant strains were found to be extremely sensitive to killing at 40°C. Heat shock was also found to increase tagA and tagE expression by 22 and 47%, respectively. Mutations in tagA blocked heat shock induced expression of tagE .