Application of High-Intensity Ultrasounds to Control the Size of Whey Proteins Particles

In this paper, we reported a new method to prepare whey protein microparticles via high-intensity ultrasound disruption. Particles morphology was characterized by confocal microscopy, and their size and distribution were analyzed by light scattering technique. Starting whey protein isolate (WPI) exhibited changes in size and distribution according to its concentration. For WPI, 7.5% (w/w) mean size was 0.7 μm, and upon sonication at ambient temperature, the size was reduced up to 0.2 μm showing the particles a rounded morphology. Sonication at room temperature of gelled WPI led to particles with sizes between 0.1 and 10 μm which had a tendency to flocculate. When WPI was submitted to sonication under heating at protein denaturation temperature, different effects were observed according to protein concentration. The particle size was reduced for the lowest WPI concentration (7.5 wt.%), did not change at 9 wt.%, but strongly increased at 12 wt.%, in comparison with the untreated sample. WPI particles of desired size in the micron range may be obtained either by sonication of gelled WPI or by sonication under heating at denaturation temperature by controlling processing variables.     

Solid�CLiquid Transitions and Stability of HPKO-in-Water Systems Emulsified by Dairy Proteins

Stability of oil-in-water emulsions during freezing and thawing is regulated by the phase transitions occurring in the continuous and dispersed phases upon thermal treatments and by the composition of the interfacial membrane. In the present study, the impact of the water phase formulation (0–2.5–5–10–20–30–40% w/w sucrose), the interfacial composition [whey protein isolates (WPI) or sodium caseinate (NaCas) used at different concentrations], and the particle size on the stability of hydrogenated palm kernel oil (30% w/w)-in-water systems was investigated. Phase/state behaviour of the continuous and dispersed phases and emulsion destabilisation were studied by differential scanning calorimetry. System morphology was observed by particle size analysis and optical microscopy. The presence of sucrose in the aqueous phase and reduced particle size distribution significantly improved emulsion stability. WPI showed better stabilising properties than NaCas at lipid to protein ratios of 10:1, 7.5:1, 5:1 and 4:1. Increased WPI concentration significantly improved emulsion resistance to breakdown during freeze–thaw cycling. NaCas showed poor stabilising properties and was ineffective in reducing emulsion destabilisation at 0% sucrose at all the lipid to protein ratios.     

Impact of Heat and Laccase on the pH and Freeze-Thaw Stability of Oil-in-Water Emulsions Stabilized by Adsorbed Biopolymer Nanoparticles

The enzymatic cross-linking of adsorbed biopolymer nanoparticles formed between whey protein isolate (WPI) and sugar beet pectin using the complex coacervation method was investigated. A sequential electrostatic depositioning process was used to prepare emulsions containing oil droplets stabilized by WPI – nanoparticle – membranes. Firstly, a finely dispersed primary emulsion (10 % w/w miglyol oil, 1 % w/w WPI, 10 mM acetate buffer at pH 4) was produced using a high-pressure homogenizer. Secondly, a series of biopolymer particles were formed by mixing WPI (0.5 % w/w) and pectin (0.25 % w/w) solutions with subsequent heating above the thermal denaturation temperature (85 °C, 20 min) to prepare dispersions containing particles in the submicron range. Thirdly, nanoparticle-covered emulsions were formed by diluting the primary emulsion into coacervate solutions (0–0.675 % w/w) to coat the droplets. Oil droplets of stable emulsions with different interfacial membrane compositions were subjected to enzymatic cross-linking. We used cross-linked multilayered emulsions as a comparison. The pH stability of primary emulsions, biopolymer complexes and nanoparticle-coated base emulsions, as well as multilayered emulsions, was determined before and after enzyme addition. Freeze-thaw stability (?9 °C for 22 h, 25 °C for 2 h) of nanoparticle-coated emulsions was not affected by laccase. Results indicated that cross-linking occurred exclusively in the multilamellar layers and not between adsorbed biopolymer nanoparticles. Results suggest that the accessibility of distinct structures may play a key role for biopolymer-cross-linking enzymes.     

Emulsifying behaviour and rheological properties of the extracellular polysaccharide produced by Pseudomonas oleovorans grown on glycerol byproduct

The functional properties of a novel extracellular polysaccharide (EPS) produced by Pseudomonas oleovorans grown on glycerol byproduct, generated by the biodiesel industry, were investigated. The EPS is a high molecular weight (4.6 × 10⁶) heteropolysaccharide, composed by neutral sugars (galactose, 68%; mannose, 17%; glucose, 13%; rhamnose, 2%; fucose, 4%) and acyl groups (3.04%). This biopolymer has pseudoplastic fluid behaviour in aqueous media. The apparent viscosity was stable for the pH range 2.9–7.1 and NaCl concentrations up to 1.0 M. Though the apparent viscosity decreased at high temperatures, at alkaline conditions and at NaCl concentrations of 2.0 M, pseudoplastic fluid behaviour was retained. The EPS was capable of stabilizing water emulsions with several hydrophobic compounds, including hydrocarbons, vegetable and mineral oils. It retained its emulsifying activity during exposure to wide temperature (30–50 °C) and pH (2–12) variations, as well as to the presence of NaCl at concentrations as high as 2.0 M.     

Phase Behavior of Whey Protein Aggregates/κ-Carrageenan Mixtures: Experiment and Theory

The phase separation behavior of whey protein isolate (WPI) aggregates and κ-carrageenan (κ-car) mixtures was studied using the Vrij's theory and image analysis method. The intrinsic parameter (molecular mass and radius of gyration) for κ-car and the WPI aggregates was determined using intrinsic viscosity and reduced viscosity of each biopolymer. Confocal microscopy observations revealed the appearance of protein aggregate domains when phase separation occurred, with microgel droplets of WPI included in a continuous κ-car phase. The occurrence of aggregate droplet has not been reported before for the phase-separating WPI/κ-car mixtures. So far, network emulsion-like microstructures have been observed with WPI in a network structure. By using different WPI concentrations (4% or 6%), the microstructure of the systems changes while increasing the κ-car concentration. The size of the microgels (1–2.5 μm) depends on both κ-car and WPI concentration. Confocal microscopy combined with image analysis (method of the variance) was used effectively as objective means to determine the phase boundary of the phase-separating systems. Additional information on the depletion layer thickness, Δ, was obtained using self-consistent field theory. The results show that Δ has a constant value of 80.5 nm for c_{k - car} \prec 2 g/l {{\hbox{c}}_{\kappa {\rm{ - car}}}} \prec {\hbox{2 g}}/{l} , in agreement with ∆ ≈ R _g (radius of gyration). Above this concentration, Δ decreases as a function of κ-car concentration. The experimental phase boundary was well predicted using Vrij's theory. This work showed a new approach to generate phase diagrams (e.g., under shear) of phase-separating systems.     

Effect of Polyglycerol Esters of Fatty Acids on the Physicochemical Properties and Stability of β-Carotene Emulsions during Digestion in Simulated Gastric Fluid

The effects of six different polyglycerol esters of fatty acids (PGEs) and two different particle sizes produced using various processing parameters on the physicochemical properties and stability of the β-carotene emulsions during digestion in simulated gastric fluid (SGF) were investigated. β-Carotene emulsions were prepared by high-pressure homogenization using β-carotene (0.1% w/w) in soybean oil as the oil phase and 1% (w/w) PGE in Milli-Q water as the water phase. The particle size of β-carotene emulsions was measured by a laser diffraction technique, and the stability of emulsions was interpreted in terms of the increase in particle size and span value of emulsion droplets and the retention of β-carotene during digestion in SGF. The average particle size ranges of emulsions were 0.17 to 0.27 μm for fine emulsions and 1.16 to 1.59 μm for coarse emulsions. In the prepared β-carotene emulsions, the particle size decreased with increasing polymerization of the glycerol in PGEs, and the higher polymerization of the glycerol also increased the stability of emulsions during digestion in SGF. Although the β-carotene content in the emulsions significantly decreased with increasing digestion period, loss of β-carotene was more severe in unstable emulsions than in stable emulsions, suggesting that the particles incorporated into droplets could provide some protective barrier for decreasing the β-carotene degradation. Therefore, β-carotene emulsions stabilized by PGEs with high polymerization of the glycerol may be useful for further applications in food and drug formulations. Decaglycerol monooleate (MO750) was demonstrated to be the most effective emulsifier in stabilizing β-carotene emulsions in this study.     

Halophilic Properties of Metal Binding Protein Characterized by High Histidine Content from Chromohalobacter salexigens DSM3043

Periplasmic metal binding protein characterized by high histidine content was cloned from moderate halophile, Chromohalobacter salexigens. The protein, termed histidine-rich metal binding protein (HP), was expressed in and purified from E. coli as a native form. HP bound to Ni- and Cu-loaded chelate columns with high affinity, and Co- and Zn-columns with moderate affinity. Although the secondary structure was not grossly altered by the addition of 0.2–2.0 M NaCl, the thermal transition pattern was considerably shifted to higher temperature with increasing salt concentration: melting temperature was raised by ~20 °C at 2.0 M NaCl over the melting temperature at 0.2 M NaCl. HP showed reversible refolding from thermal melting in 0.2–1.15 M NaCl, while it formed irreversible aggregates upon thermal melting at 2 M NaCl. Addition of 0.01–0.1 mM NiSO₄ stabilized HP against thermal melting with high reversibility, while addition above 0.5 mM resulted in irreversible melting due to aggregation.     

Electrospray Production of Curcumin-walnut Protein Nanoparticles

Electrospray technique was applied to produce nanoparticles (NPs) from walnut protein isolate (WPI) in order to encapsulate curcumin. The optimized condition for the production of the WPI NPs was WPI concentration of 3.5%, a solvent mixture of deionized water: 2-propanol (2:1, v/v), electrospraying at a fixed distance, voltage and flow rate including 17.5 cm, 20 kV and 0.09 mL/h, respectively. The ratio of curcumin to WPI was 1:100 (w/w), and the encapsulation efficiency was around 61.5%. The addition of curcumin to WPI solution affected the size, form and surface properties of the electrosprayed NPs. FESEM, HRTEM, AFM, XRD, FT-IR and fluorescence spectroscopy, were applied for the characterization of the produced NPs via electrospraying. The in vitro study revealed that release of curcumin was limited in the stomach due to the protective effect of WPI NPs. In the small intestine, WPI particles were hydrolyzed and curcumin was released. Furthermore, the antioxidant activity of curcumin-WPI NPs after in vitro digestion was significantly higher than WPI NPs due to the bioactive peptides released from WPI NPs. It can be concluded that WPI NPs could act as a unique food-grade carrier to boost the solubility of curcumin.

     

Effect of salinity on the biochemical composition of the alga <Emphasis Type="Italic">Botryococcus braunii</Emphasis> Kütz IPPAS H-252

The effect of 0.3 and 0.7 M NaCl on biomass yield, total nitrogen content, intracellular lipid content, and fatty acid profile of the lipids of the alga Botryococcus braunii IPPAS H-252 in different phases of the culture cycle was studied. The presence of sodium chloride in the medium inhibited the growth of algal cells for the first 3 days of the experiment, causing a decrease in total nitrogen, enhanced synthesis of triacylglycerols, and considerable changes in the lipid fatty acid profile: decreases in polyenoic acid contents (from 68.34% to 29.38% and 12.8%) and proportions of long-chain saturated acids (from 0.53% to 5.3% and 14.13% of the total fatty acids) at 0.3 M NaCl and 0.7 M NaCl, respectively. In later phases of the culture, at 0.3 M NaCl, the content of polyenoic acids rose to the values characteristic of the active growth phase of this alga. At 0.7 M NaCl, the proportion of polyenoic acids grew less significantly, but biomass concentration and total nitrogen increased, similarly to the experiment with 0.3 M NaCl.     

Effect of Oral Resveratrol on the BDNF Gene Expression in the Hippocampus of the Rat Brain

Resveratrol is a plant polyphenolic compound. Evidence indicates that resveratrol has beneficial effects against aging and neurodegenerative diseases. The goal of our study was in vivo examination of the effects of resveratrol on the abundance of mRNA encoding Brain Derived Neurotrophic Factor (BDNF) in the hippocampus of rat brain. Rats were administrated orally by different doses (2.5–20 mg/kg bwt) of resveratrol for 3, 10 and 30 days. Saline was used as control and 10% ethanol in saline was used as vehicle for resveratrol. Measurement of BDNF mRNA by Real-time RT–PCR showed that levels of the mRNA for BDNF were significantly and dose dependently elevated in the hippocampal tissues of rats. The findings suggest that the neuroprotective effects of resveratrol may be at least partly due to its inducing effects on the expression levels of the BDNF mRNA.     

Identification of a glucose-6-phosphate isomerase involved in adaptation to salt stress of <Emphasis Type="Italic">Dunaliella salina</Emphasis>

The unicellular green alga Dunaliella salina is a recognized model for studying plant adaptation to high salinity. To isolate some salt-induced proteins at proteomics levels and to identify their expressions at gene levels, algal cells at logarithmic phase cultured in 1.5 and 3.5 M NaCl media were harvested for protein extraction. Solubilized proteins were applied to two-dimensional gel electrophoresis (2-DE) and analyzed by ImageMaster 2D Platinum software. Twenty-one protein spots whose intensities were elevated threefold to 13-fold at 3.5 M NaCl as compared to 1.5 M NaCl were analyzed by matrix-assisted laser desorption/ionization tandem time of flight mass spectrometry. One salt-induced protein isolated from the 2-DE gels was identified as a glucose-6-phosphate isomerase (GPI) from D. salina (DsGPI). A full-length cDNA of DsGPI was obtained using rapid amplification of cDNA end technique, and it was shown by heterologous expression to encode a protein with a molecular weight consistent with the protein spot in the 2-DE gels. Real-time quantitative RT-PCR demonstrated that the mRNA of DsGPI was induced up to eightfold (P < 0.01) by 2.5 M and 14-fold higher (P < 0.01) by 3.5 M NaCl than by 1.5 M NaCl, respectively. It is concluded that the protein isolated through 2-DE is indeed DsGPI and that the DsGPI gene may be involved in adaptation to high salinity.     

Outstanding Freeze-Thaw Stability of Mayonnaise Stabilized Solely by a Heated Soy Protein Isolate

There is an increasing interest in the development of cholesterol-free mayonnaise through the strategy to use food-grade polymeric emulsifiers to substitute or partially substitute egg yolk. In addition, mayonnaise-type emulsions or mayonnaise are usually susceptible to freezing. The work reported that a heated soy protein isolate (SPI) could perform as an effective sole stabilizer for mayonnaise-type high internal phase emulsions (HIPEs) with an outstanding freeze-thaw stability. Such HIPEs with a self-supporting morphology could be stabilized using the heated SPI at a protein concentration (c) as low as 0.3 wt.%. Increasing the c from 0.3 to 4.0 wt.% resulted in a progressive strengthening of gel network for the mayonnaise-type HIPEs, and the formation of finer droplets. All the as-formed HIPEs exhibited an elasticity-dominated rheological behavior, with the stiffness increasing the c. The elasticity of the gel-like HIPEs at low c values (e.g., 0.3 wt.%) was mainly associated with the formation of bridged emulsions, while that at high c values was more associated with the inter-droplet hydrophobic interactions between protein-coated droplets. All the mayonnaise-type HIPEs, formed even at a c value of 0.3 wt.%, were extremely stable against the freeze-thaw treatment. The high freeze-thaw stability seemed to be unrelated to the formation of ice crystals during the freezing. All the freeze-thawed HIPEs still exhibited a high long-term storage stability against coalescence, and their elasticity on the contrary became strengthened after the long-term storage. The findings have great implications for the development of cholesterol-free mayonnaise with a high freeze-thaw stability, suitable for food formulations.

     

Developing procedures for the large-scale purification of human serum butyrylcholinesterase

Human serum butyrylcholinesterase (Hu BChE) is the most viable candidate for the prophylactic treatment of organophosphate poisoning. A dose of 200 mg/70 kg is predicted to protect humans against 2× LD₅₀ of soman. Therefore, the aim of this study was to develop procedures for the purification of gram quantities of this enzyme from outdated human plasma or Cohn Fraction IV-4. The purification of Hu BChE was accomplished by batch adsorption on procainamide-Sepharose-CL-4B affinity gel followed by ion-exchange chromatography on a DEAE-Sepharose column. For the purification of enzyme from Cohn Fraction IV-4, it was resuspended in 25 mM sodium phosphate buffer, pH 8.0, and fat was removed by decantation, prior to batch adsorption on procainamide-Sepharose gel. In both cases, the procainamide gel was thoroughly washed with 25 mM sodium phosphate buffer, pH 8.0, containing 0.05 M NaCl, and the enzyme was eluted with the same buffer containing 0.1 M procainamide. The enzyme was dialyzed and the pH was adjusted to 4.0 before loading on the DEAE column equilibrated in sodium acetate buffer, pH 4.0. The column was thoroughly washed with 25 mM sodium phosphate buffer, pH 8.0 containing 0.05 M NaCl before elution with a gradient of 0.05–0.2 M NaCl in the same buffer. The purity of the enzyme following these steps ranged from 20% to 40%. The purity of the enzyme increased to >90% by chromatography on an analytical procainamide affinity column. Results show that Cohn Fraction IV-4 is a much better source than plasma for the large-scale isolation of purified Hu BChE.     

Improved Viability of Microencapsulated Probiotics in a Freeze-Dried Banana Powder During Storage and Under Simulated Gastrointestinal Tract

Freeze-dried banana powder represents an ideal source of nutrients and has not yet been used for probiotic incorporation. In this study, microencapsulation by freeze drying of probiotics Lactobacillus acidophilus and Lactobacillus casei was made using whey protein isolate (WPI), fructooligosaccharides (FOS), and their combination (WPI + FOS) at ratio (1:1). Higher encapsulation yield was found for (WPI + FOS) microspheres (98%). Further, microcapsules of (WPI + FOS) were used to produce a freeze-dried banana powder which was analyzed for bacterial viability under simulated gastrointestinal fluid (SGIF), stability during storage at 4 °C and 25 °C, and chemical and sensory properties. Results revealed that (WPI + FOS) microcapsules significantly increased bacteria stability in the product over 30 days of storage at 4 °C averaging (≥ 8.57 log CFU/g) for L. acidophilus and (≥ 7.61 log CFU/g) for L. Casei as compared to free cells. Bacteria encapsulated in microspheres (WPI + FOS) were not significantly affected by the SGIF, remaining stable up to 7.05 ± 0.1 log CFU/g for L.acidophilus and 5.48 ± 0.1 log CFU/g for L.casei after 90 min of incubation at pH 2 compared to free cells which showed minimal survival. Overall, encapsulated probiotics enriched freeze-dried banana powders received good sensory scores; they can therefore serve as safe probiotics food carriers.

     

Effects of resveratrol on membrane biophysical properties: relevance for its pharmacological effects

The current study gathers a range of spectrophotometric and spectrofluorimetric techniques to systematically monitor the effects of resveratrol (trans-3,5,4′-trihydrostilbene) on the biophysical properties of membrane model systems consisting of unilamellar liposomes of phosphatidylcholine (DPPC) with the ultimate goal of relating these effects with some of the well documented pharmacological properties of this compound, and clarifying some controversial results reported on the literature.Physiological conditions have been pursued, such as a buffered pH control with adjusted ionic strength similar to the blood plasma conditions (pH 7.4, I = 0.1 M) and the study at different membrane physical states (gel phase and fluid phase) for the assessment of resveratrol-membrane: aqueous partition coefficient by derivative spectroscopy. Results obtained by fluorescence quenching and anisotropy studies indicate that resveratrol has a membrane fluidizing effect and is able to permeate the membrane even in the gel phase. These results mirror the well described antioxidant effect of resveratrol, since antioxidants have to reach peroxidised rigid membranes and increase membrane fluidity in order to interact more efficiently with lipid radicals in the disordered lipid bilayer. Location of resveratrol pointed also to a membrane distribution that is favourable for scavenging the lipid radicals and was elucidated using probes positioned at different membrane depths suggesting that this compound penetrates into the acyl membrane region but also positions its polar hydroxyl group near the headgroup region of the membrane.     

Effects of salts on activity of halophilic cellulase with glucomannanase activity isolated from alkaliphilic and halophilic Bacillus sp. BG-CS10

Alkaliphilic and halophilic Bacillus sp. BG-CS10 was isolated from Zabuye Salt Lake, Tibet. The gene celB, encoding a halophilic cellulase was identified from the genomic library of BG-CS10. CelB belongs to the cellulase superfamily and DUF291 superfamily, with an unknown function domain and less than 58% identity to other cellulases in GenBank. The purified recombinant protein (molecular weight: 62 kDa) can hydrolyze soluble cellulose substrates containing beta-1,4-linkages, such as carboxylmethyl cellulose and konjac glucomannan, but has no exoglucanase and β-glucosidase activities. Thus, CelB is a cellulase with an endo mode of action and glucomannanase activity. Interestingly, the enzyme activity was increased approximately tenfold with 2.5 M NaCl or 3 M KCl. Furthermore, the optimal temperatures were 55°C with 2.5 M NaCl and 35°C without NaCl, respectively. This indicates that NaCl can improve enzyme thermostability. The K _m and k _cat values of CelB for CMC with 2.5 M NaCl were 3.18 mg mL⁻¹ and 26 s⁻¹, while the K _m and k _cat values of CelB without NaCl were 6.6 mg mL⁻¹ and 2.1 s⁻¹. Thus, this thermo-stable, salt and pH-tolerant cellulase is a promising candidate for industrial applications, and provides a new model to study salt effects on the structure of protein.     

Influence of pH and ionic strength on formation and stability of emulsions containing oil droplets coated by beta-lactoglobulin-alginate interfaces

Emulsions of 0.1 wt % corn oil-in-water containing oil droplets coated by beta-lactoglobulin (0.009 wt % beta-Lg, 5 mM phosphate buffer, pH 7.0) were prepared in the absence and presence of sodium alginate (0 or 0.004 wt %). The pH (3-7) and ionic strength (0-250 mM NaCl) of these emulsions were adjusted, and the particle charge, particle size, and creaming stability were measured. Alginate adsorbed to the beta-Lg-coated droplets from pH 3 to 6, which was attributed to electrostatic attraction between the anionic polymer and cationic patches on the droplet surfaces. Droplets coated by beta-Lg-alginate had better stability to flocculation than those coated by beta-Lg alone, especially around the isoelectric point of the adsorbed proteins and at low ionic strengths (< 100 mM NaCl). At pH 5, alginate molecules desorbed from the droplet surfaces at high salt concentrations due to weakening of the electrostatic attraction.     

Thirst and salt appetite responses in young and old Brown Norway rats

Male Brown Norway rats aged 4 mo (young) and 20 mo (old) received a series of experimental challenges to body fluid homeostasis over approximately 3 mo. Water was available for drinking in some tests, and both water and 0.3 M NaCl were available in others. The series included three episodes of extracellular fluid depletion (i.e., furosemide + 20 h of sodium restriction), two tests involving intracellular fluid depletion (i.e., hypertonic saline: 1 or 2 M NaCl at 2 ml/kg body wt sc), one test involving overnight food and fluid restriction, and testing with captopril adulteration of the drinking water (0.1 mg/ml) for several days. Old rats were significantly heavier than young rats throughout testing. Old rats drank less water and 0.3 M NaCl after sodium deprivation than young rats, in terms of absolute and body weight-adjusted intakes. Old rats drank only half as much water as young rats in response to subcutaneous hypertonic NaCl when intakes were adjusted for body weight. Old rats drank less 0.3 M NaCl than young rats after overnight food and fluid restriction when intakes were adjusted for body weight. In response to captopril adulteration of the drinking water, young rats significantly increased daily ingestion of 0.3 M NaCl when it was available as an alternative to water and significantly increased daily water intakes when only water was available, in terms of absolute and body weight-adjusted intakes. Old rats had no response to captopril treatment. These results add important new information to previous reports that aging rats have diminished thirst and near-absent salt appetite responses to regulatory challenges.     

Affinity enrichment of bovine lactoferrin in whey

Bovine lactoferrin was enriched in various whey samples by affinity chromatography using immobilized gangliosides. Bovine gangliosides were isolated from fresh buttermilk using a combination of ultrafiltration and organic extraction. Isolated gangliosides were covalently immobilized onto controlled-pore glass beads. The immobilized matrix contained 66 micrograms of gangliosides per gram of beads. After loading the matrix with reconstituted whey protein isolate (WPI) or whey protein concentrate (WPC), the matrix was washed with sodium phosphate buffer (pH 7) followed by sodium acetate buffer (pH 4) before elution of lactoferrin with 1 M NaCl in sodium acetate buffer. From the intensities of the protein bands in SDS-PAGE, lactoferrin constituted a minimum of 40% of the total protein in the salt eluted sample. WPI, pretrated by heating and ultrafiltration, showed the highest lactoferrin purity among protein sources, while WPI (10% wt/vol) showed the highest recovery. These results show that immobilized gangliosides can be used to enrich the lactoferrin content of whey.