An Oral-Controlled Release Drug Delivery System for Liquid and Semisolid Drug Formulations

A novel oral drug delivery system for the controlled release of liquid drugs, drug solutions, and semisolid drug preparations is presented that is utilizing the constant vapor pressure of liquefied gas. The system is equipped with a capillary as an element determining the drug delivery rate and contains a liquefied propellant with a suitable boiling point below human body temperature. In the dissolution studies, polyacrylate gels of different viscosities containing paracetamol as model drug were used. Zero-order release kinetics was obtained. The release rates were dependent on the gel viscosity. Besides, by gel viscosity, the drug release rates could also be modified by changing the propellant type and the capillary parameters such as length or diameter. Accordingly, the new system enables a wide range of drug delivery kinetics which can be modified in a case-by-case basis in order to match the desired drug delivery characteristics.     

Influence of Formulation Factors on Tablet Formulations with Liquid Permeation Enhancer Using Factorial Design

For a drug with low bioavailability, a matrix tablet with liquid permeation enhancer (Labrasol®) was formulated. Factorial design was used to evaluate the effect of three formulation factors: drug percentage, polymer type (Methocel® K100M or Eudragit® L 100-55), and tablet binder percentage (Plasdone® S-630) on tablet characteristics. Tablets were prepared by direct compression and characterized. Compressibility index values ranged between 15.90% and 29.87% and tablet hardness values from 7.8 to 29.78 Kp. Eudragit®-containing formulations had better compressibility index values with higher tablet hardness. Time for 75% of drug release (T ₇₅) was calculated, and formulations containing Eudragit® L 100-55 had faster release rates than tablet formulations with Methocel® K100M. Formulations with Methocel® K100M fit well in the Higuchi model as indicated by their R ² values (>0.98). Among all the formulation factors studied, polymer type displayed the highest and statistically significant effect on compressibility index, tablet hardness, and dissolution rate. Statistical design helped in better understanding the effect of formulation factors on tablet characteristics important for designing formulations with desired characteristics.     

Design of Lipid-Based Formulations for Oral Administration of Poorly Water-Soluble Drug Fenofibrate: Effects of Digestion

Lipid-based drug carriers are likely to have influence on bioavailability through enhanced solubilization of the drug in the gastrointestinal tract. The study was designed to investigate the lipid formulation digestibility in the simulated gastro intestinal media. Fenofibrate was formulated in representative Type II, IIIA, IIIB and IV self-emulsifying/microemulsifying lipid delivery systems (SEDDS and SMEDDS designed for oral administration) using various medium-chain glyceride components, non-ionic surfactants and cosolvents as excipients. Soybean oil was used only as an example of long-chain triglycerides to compare the effects of formulation with their counterparts. The formulations were subjected to in vitro digestion specifically to predict the fate of the drug in the gastro intestinal tract after exposure of the formulation to pancreatic enzymes and bile. In vitro digestion experiments were carried out using a pH-stat maintained at pH 7.5 for 30 min using intestinal fluids simulating the fed and fasted states. The digestion rate was faster and almost completed in Type II and IIIA systems. Most of the surfactants used in the studies are digestible. However, the high concentration of surfactant and/or cosolvent used in Type IIIB or IV systems lowered the rate of digestion. The digestion of medium-chain triglycerides was faster than long-chain triglycerides, but kept comparatively less drug in the post digestion products. Medium-chain mixed glycerides are good solvents for fenofibrate as rapidly digested but to improve fenofibrate concentration in post digestion products the use of long-chain mixed glycerides are suggested for further investigations.KEY WORDS: fenofibrate, in vitro lipolysis, lipid formulation classification system, self-emulsifying/microemulsifying drug delivery systems (SEDDS, SMEDDS)     

Masking the Bitter Taste of Injectable Lidocaine HCl Formulation for Dental Procedures

Several attempts have been made to mask the bitter taste of oral formulations, but none have been made for injectable formulations. This study aims to mask the bitter taste of dental lidocaine HCl (LID) injection using hydroxypropyl-β-cyclodextrin (HP-β-CD) and sodium saccharin. Inclusion complexes of LID and HP-β-CD were prepared by the solution method in 1:1 and 1:2 M ratios. Inclusion complexes in solution were studied using phase solubility in phosphate buffer solutions (pH 8, 9, and 10). Freeze-dried inclusion complexes were characterized using differential scanning calorimetry (DSC), X-ray, Fourier transform infrared (FT-IR), nuclear magnetic resonance (NMR), scanning electron microscopy (SEM), and in vitro release. Injectable formulations were prepared using inclusion complexes and characterized for stability and for taste using an Alpha MOS ASTREE electronic tongue (ETongue). The association constants of HP-β-CD with lidocaine-free base and its ionized form were found to be 26.23 ± 0.00025 and 0.8694 ± 0.00045 M⁻¹, respectively. Characterization studies confirmed the formation of stable inclusion complexes of LID and HP-β-CD. Injectable formulations were found to be stable for up to 6 months at 4°C, 25°C, and 40°C. The taste evaluation study indicated that HP-β-CD (1:1 and 1:2 M ratios) significantly improved the bitter taste of LID injectable formulation. In conclusion, inclusion complex in the 1:1 M ratio with 0.09% sodium saccharin was considered to be optimum in masking the bitter taste of LID.KEY WORDS: bitter taste, HP-β-CD, inclusion complex, injectable, lidocaine HCl, taste masking     

Formulation and optimization of solid lipid nanoparticles of buspirone HCl for enhancement of its oral bioavailability

Solid lipid nanoparticles (SLNs) of buspirone HCl as a water-soluble drug were prepared by emulsification-evaporation, followed by the sonification method. A preliminary screening of the most effective parameters on the production of nanoparticles by a Taguchi L₈ orthogonal array showed that the lipid type, surfactant percentage, speed of homogenizer, and acetone:dichloromethane (DCM) ratio had a significant effect on particle size. In the next step, the lipid was fixed on cetyl alcohol, surfactant on Tween 20, lecithin:lipid weight ratio on 20:70, sonication time on 30 seconds, and the other effective, independent factors aforementioned were studied each at three levels by a three-factor, three-level Box-Behnken design. The percentage of drug entrapment, mean particle-size diameter, and zeta potential were studied as the responses. Contour plots were constructed to further elucidate the relationship between the independent and dependent variables. A pharmacokinetic study was conducted in male Wistar rats after oral administration of 15?mg.kg^?1 buspirone in the form of free drug or SLNs. The optimized SLNs had aq particle size of 345.7?nm, loading efficiency of 32.8%, and zeta potential of ?6.8?mV. Buspirone released about 90% during 4.5?hours in vitro. It was found that the relative bioavailability of the drug in SLNs was significantly increased, compared to that of the drug solution.     

Polymer Percolation Threshold in HPMC Extended Release Formulation of Carbamazepine and Verapamil HCl

The principles of the percolation theory were applied to further understand and design hydroxypropyl methylcellulose (HPMC) extended release matrix tablets containing carbamazepine and verapamil HCl. This statistical theory studies disordered or chaotic systems where the components are randomly distributed in a lattice. The application of this theory to study the hydration and drug release of hydrophilic matrices allows describing the changes in hydration and drug release kinetics of swellable matrices. The aim of this work was to study and develop extended release matrix formulations for carbamazepine and verapamil HCl, containing hypromellose (HPMC, METHOCEL™ Premium K100M CR) as rate controlling polymer using the concepts of percolation theory. The knowledge of the percolation threshold of the components of the matrix formulations contributes to improve their design. First, reducing the time to market and second, avoiding to formulate in the nearby of the percolation threshold, which will result in a lower variability. Therefore these formulations will be more robust when they are prepared at industrial scale. The HPMC percolation threshold for drugs with very different water solubilities was determined and it was shown that there was no significant influence of drug solubility on the HPMC critical concentration threshold (excipient percolation threshold). This may be related to the versatility and broad functionality of the swelling hydrophilic matrices.     

Microemulsion Transdermal Formulation for Simultaneous Delivery of Valsartan and Nifedipine: Formulation by Design

The objective of the study was to optimize the proportion of different components for formulating oil in water microemulsion formulation meant for simultaneous transdermal delivery of two poorly soluble antihypertensive drugs. Surface response methodology of Box-Behnken design was utilized to evaluate the effect of two oils (Captex 500 - x1 and Capmul MCM - x2) and surfactant (Acrysol EL135 - x3) on response y1 (particle size), y2 (solubility of valsartan), and y3 (solubility of nifedipine). The important factors which significantly affected the responses were identified and validated using ANOVA. The model was diagnosed using normal plot of residuals and Box-Cox plot. The design revealed an inverse correlation between particle size and concentration of Capmul MCM and Acrysol EL 135. However, an increase in concentration of Captex 500 led to an increase in particle size of microemulsion. Solubility of valsartan decreased while that of nifedipine increased with increase in concentration of Captex 500. Capmul MCM played a significant role in increasing the solubility of valsartan. The effect of Acrysol EL 135 on solubility of both drugs, although significant, was only marginal as compared to that of Captex 500 and Capmul MCM. The optimized microemulsion was able to provide an enhancement ratio of 27.21 and 63.57-fold for valsartan and nifedipine, respectively, with respect to drug dispersion in aqueous surfactant system when evaluated for permeation studies. The current studies candidly suggest the scope of microemulsion systems for solubilizing as well as promoting the transport of both drugs across rat skin at an enhanced permeation rate.     

Cream Formulation Impact on Topical Administration of Engineered Colloidal Nanoparticles

In order to minimize the impact of systemic toxicity of drugs in the treatment of local acute and chronic inflammatory reactions, the achievement of reliable and efficient delivery of therapeutics in/through the skin is highly recommended. While the use of nanoparticles is now an established practice for drug intravenous targeted delivery, their transdermal penetration is still poorly understood and this important administration route remains almost unexplored. In the present study, we have synthesized magnetic (iron oxide) nanoparticles (MNP) coated with an amphiphilic polymer, developed a water-in-oil emulsion formulation for their topical administration and compared the skin penetration routes with the same nanoparticles deposited as a colloidal suspension. Transmission and scanning electron microscopies provided ultrastructural evidence that the amphiphilic nanoparticles (PMNP) cream formulation allowed the efficient penetration through all the skin layers with a controllable kinetics compared to suspension formulation. In addition to the preferential follicular pathway, also the intracellular and intercellular routes were involved. PMNP that crossed all skin layers were quantified by inductively coupled plasma mass spectrometry. The obtained data suggests that combining PMNP amphiphilic character with cream formulation improves the intradermal penetration of nanoparticles. While PMNP administration in living mice via aqueous suspension resulted in preferential nanoparticle capture by phagocytes and migration to draining lymph nodes, cream formulation favored uptake by all the analyzed dermis cell types, including hematopoietic and non-hematopoietic. Unlike aqueous suspension, cream formulation also favored the maintenance of nanoparticles in the dermal architecture avoiding their dispersion and migration to draining lymph nodes via afferent lymphatics.     

Design and evaluation of proniosomes as a carrier for ocular delivery of lomefloxacin HCl

The current investigation aims to develop and evaluate novel ocular proniosomal gels of lomefloxacin HCl (LXN); in order to improve its ocular bioavailability for the management of bacterial conjunctivitis. Proniosomes were prepared using different types of nonionic surfactants solely and as mixtures with Span 60. The formed gels were characterized for entrapment efficiency, vesicle size, and in vitro drug release. Only Span 60 was able to form stable LXN-proniosomal gel when used individually while the other surfactants formed gels only in combination with Span 60 at different ratios. The optimum proniosomal gel; P-LXN 7 (Span 60:Tween 60, 9:1) appeared as spherical shaped vesicles having high entrapment efficiency (>80%), appropriate vesicle size (187?nm) as well as controlled drug release over 12?h. Differential scanning calorimetry confirmed the amorphous nature of LXN within the vesicles. Stability study did not show any significant changes in entrapment efficiency or vesicle size after storage for 3 months at 4?°C. P-LXN 7 was found to be safe and suitable for ocular delivery as proven by the irritancy test. The antibacterial activity of P-LXN 7 evaluated using the susceptibility test and topical therapy of induced ocular conjunctivitis confirmed the enhanced antibacterial therapeutic efficacy of the LXN-proniosomal gel compared to the commercially available LXN eye drops.     

Statistical Design for Formulation Optimization of Hydrocortisone Butyrate-Loaded PLGA Nanoparticles

The aim of this investigation was to develop hydrocortisone butyrate (HB)-loaded poly(d,l-lactic-co-glycolic acid) (PLGA) nanoparticles (NP) with ideal encapsulation efficiency (EE), particle size, and drug loading (DL) under emulsion solvent evaporation technique utilizing various experimental statistical design modules. Experimental designs were used to investigate specific effects of independent variables during preparation of HB-loaded PLGA NP and corresponding responses in optimizing the formulation. Plackett–Burman design for independent variables was first conducted to prescreen various formulation and process variables during the development of NP. Selected primary variables were further optimized by central composite design. This process leads to an optimum formulation with desired EE, particle size, and DL. Contour plots and response surface curves display visual diagrammatic relationships between the experimental responses and input variables. The concentration of PLGA, drug, and polyvinyl alcohol and sonication time were the critical factors influencing the responses analyzed. Optimized formulation showed EE of 90.6%, particle size of 164.3 nm, and DL of 64.35%. This study demonstrates that statistical experimental design methodology can optimize the formulation and process variables to achieve favorable responses for HB-loaded NP.     

Comparison of TSH Levels with Liquid Formulation Versus Tablet Formulations of Levothyroxine in the Treatment of Adult Hypothyroidism

ObjectiveA great number of factors can interfere with levothyroxine (LT4) tablet absorption, leading to increased serum thyroid-stimulating hormone (TSH) levels and, accordingly, to increased LT4 requirements. LT4 oral solution (LT4-OS) is a novel formulation with a pharmacokinetics profile different from those of tablets. The aim of this study was to retrospectively evaluate whether serum TSH levels were decreased after switching adult hypothyroid patients from the tablet to LT-OS.MethodsWe retrospectively evaluated 53 outpatients on LT4 replacement therapy (consumed within 1 hour before breakfast) who switched from LT4 tablets to LT4-OS without changing the daily dose. We compared preswitch TSH (TSH1) with TSH level 60 to 90 days after the switch (TSH2) and examined the clinical differences between the patients whose TSH did and did not drop after the switch.ResultsAfter the switch, TSH levels decreased from a median value of 3.04 (interquartile range [IQR] 1.75-6.80) to 2.30 (IQR 1.21-3.81) μIU/mL, and the difference was significant (P = .0034). We observed a TSH reduction (TSH2/TSH1 ratio < 1) in 36/53 (67.9%) of patients; the median TSH2/TSH1 ratio was 0.71 (IQR 0.37-1.14). In the group of patients whose TSH dropped, we observed an increased frequency of factors interfering with LT4 absorption (P = .014). The median TSH2/TSH1 ratios were 0.50 (IQR 0.31-0.72) and 0.85 (IQR 0.65-1.36) for patients with and without interfering factors, respectively.ConclusionOur study confirms that LT4-OS could have an increased absorption rate in comparison to LT4 tablets, especially in the presence of other factors interfering with LT4 absorption. (Endocr Pract. 2014;20:657-662)     

A Design and Evaluation of Layered Matrix Tablet Formulations of Metoprolol Tartrate

The aim of this paper was to evaluate the performance of different swellable polymers in the form of layered matrix tablets to provide controlled therapeutic effect of metoprolol tartrate for twice daily administration. Seven different swellable polymers (carrageenan, hydroxypropylmethyl cellulose, pectin, guar gum, xanthan gum, chitosan, and ethyl cellulose) were evaluated alone or in combination as release-retardant layer. Tablets were tested for weight variation, hardness, diameter/thickness ratio, friability, and drug content uniformity and subjected to in vitro drug-release studies. In addition, the target-release profile of metoprolol tartrate was plotted using its clinical pharmacokinetic data, and the release profiles of the tablets were evaluated in relation to the plotted target release profile. Carrageenan was determined as the best polymer in two-layered matrix tablet formulations due to its better accordance to the target release profile and was selected for preparing three-layered matrix tablets. Carrageenan formulations exhibited super case II release mechanism. Accelerated stability testing was performed on two- and three-layered matrix tablet formulations of carrageenan. The tablets were stored at 25°C/60% relative humidity and 40°C/75% relative humidity for 6 months and examined for physical appearance, drug content, and release characteristics. At the end of the storage time, formulations showed no change either in physical appearance, drug content, or drug-release profile. These results demonstrated the suitability of three-layered tablet formulation of carrageenan to provide controlled release and improved linearity for metoprolol tartrate in comparison to two-layered tablet formulation.     

A New Formulation of Calcitriol (DN-101) for High-Dose Pulse Administration in Prostate Cancer Therapy

Although the antineoplastic activity of calcitriol in prostate cancer has been known for many years, the agent's use in oncology has been prevented because of the occurrence of hypercalcemia with daily administration. High-dose pulse administration of calcitriol has the potential to improve the therapeutic index of calcitriol. Results of a phase II study of calcitriol and docetaxel (Taxotere(R)) suggest that this combination may have utility in androgen-independent prostate cancer (AIPC). DN-101, a high-dose (15 mug) formulation of calcitriol suitable for use in oncology, is now being tested in a randomized trial (AIPC Study of Calcitriol Enhancing Taxotere). This formulation of calcitriol could become an important new tool for improving the efficacy of docetaxel in the treatment of AIPC and would join the ranks of other nuclear receptor ligands in cancer treatment. Investigations of DN-101 in the treatment of a broad range of tumor types and in combination with a variety of agents are an exciting new area of research.     

Improved Oral Bioavalability of Mebudipine Upon Administration in PhytoSolve and Phosal-Based Formulation (PBF)

The aim of this investigation was to examine the efficacy of PhytoSolve and Phosal-based formulation (PBF) to enhance the oral bioavailability of mebudipine, which is a poorly water-soluble calcium channel blocker. The solubility of mebudipine in various oils was determined. PhytoSolve was prepared with a medium-chain triglyceride (MCT) oil (20%), soybean phospholipids (5%), and a 70% fructose solution (75%). The influence of the weight ratio of Phosal 50PG to glycerol in PBF on the mean globule size was studied with dynamic light scattering. The optimized formulation was evaluated for robustness toward dilution, transparency, droplet size, and zeta potential. The in vivo oral absorption of different mebudipine formulations (PhytoSolve, PBF, oily solution, and suspension) were evaluated in rats. The optimized PBF contained Phosal 50PG/glycerol in a 6:4 ratio (w/w). The PBF and PhytoSolve formulations were miscible with water in any ratio and did not demonstrate any phase separation or drug precipitation over 1 month of storage. The mean particle size of PhytoSolve and PBF were 138.5 ± 9.0 and 74.4 ± 2.5 nm, respectively. The in vivo study demonstrated that the oral bioavailability of PhytoSolve and PBF in rats was significantly higher than that of the other formulations. The PhytoSolve and PBF formulations of mebudipine are found to be more bioavailable compared with suspension and oily solutions during an in vivo study in rats. These formulations might be new alternative carriers that increase the oral bioavailability of poorly water-soluble molecules, such as mebudipine.KEY WORDS: mebudipine, oral bioavailability, Phosal 50PG, PhytoSolve     

Design of Methylprednisolone Biodegradable Microspheres Intended for Intra-articular Administration

This study aimed to design methyprednisolone (MP)-loaded poly(d,l lactide-co-glycolide) (PLGA) microspheres (MS) intended for intra-articular administration. MP was encapsulated in four different types of PLGA by using an S/O/W technique. The effects of β-irradiation at the dose of 25 kGy were evaluated on the chemical and physicochemical properties of MS and the drug release profiles. The S/O/W technique with hydroxypropylmethylcellulose (HPMC) as surfactant allowed obtaining MS in the tolerability size (7–50 μm) for intra-articular administration. The MP encapsulation efficiency ranged 56–60%. HPMC traces were evidenced in the loaded and placebo MS by attenuated total reflectance Fourier transform infrared spectroscopy. MS made of the capped PLGA DL5050 2M (MS 2M) and uncapped PLGA DL5050 3A (MS 3A) prolonged the release of MP over a 2- to 3-month period with a triphasic (burst release–dormant period–second release pulse) and biphasic release pattern, respectively. The β-irradiation did not significantly alter the morphology, chemical, and physicochemical properties of MS. The only variation was evidenced in the drug release for MS 2M in term of shorting of the dormant period. The minimal variations in the properties of irradiated PLGA MS, which are in disagreement with literature data, may be attributed to a radioprotecting effect exerted by HPMC.     

Formulations for delivery of therapeutic proteins

Advances in biotechnology have now created a capacity to produce therapeutically active proteins on a commercial scale, opening the potential for their application in an array of disease conditions. The process of translation of the variety of different therapeutic proteins into the medicines used in clinics is now occurring. To assist in this translation, new formulations to deliver proteins could play an important role. These new formulations need to more adequately address the pharmacological and therapeutic requirement for each particular protein/peptide and, in that way, either improve present therapies or extend with new entries the current list of protein based medicines used in clinic.

Design and Characterization of Topical Formulations: Correlations Between Instrumental and Sensorial Measurements

The interaction between cosmetic emulsions and the skin’s surface is an important factor to consider in the development of topical formulations. Two important ingredients in cosmetic formulations are waxes and polymers. The physical and mechanical properties of formulations directly impact the interface skin-formulation. To evaluate this interaction, it is important to study the rheology, texture, and sensory properties. In this context, the aim of the study was to evaluate the influence of waxes and polymers on the rheological behavior, texture profile, and sensorial properties of topical formulations and the correlation between these parameters. The best combination of a wax and a polymer was determined by full factorial design of experiments and applied to develop eight formulations that were tested in relation to rheological, mechanical, and sensorial properties. The polymer helps with the spreadability of the formulation, and the wax had a strong influence on the parameters related to the structure of emulsions. A correlation between these parameters was observed. This way, it was possible to compare theoretical and practical data, except between the flow index and the work of shear. Finally, it was possible to predict sensorial aspects from rheological and texture parameters, making the formulation process easier and more integrated with all stages of the development of new topical formulations. Thus, the present study introduces a new proposal in the development of cosmetics.     

Design of a Modern Liposome and Bee Venom Formulation for the Traditional VIT-Venom Immunotherapy

Traditional venom immunotherapy uses injections of whole bee venom in buffer or adsorbed in Al (OH)₃ in an expensive, time-consuming way. New strategies to improve the safety and efficacy of this treatment with a reduction of injections would, therefore, be of general interest. It would improve patient compliance and provide socio-economic benefits. Liposomes have a long tradition in drug delivery because they increase the therapeutic index and avoid drug degradation and secondary effects. However, bee venom melittin (Mel) and phospholipase (PLA₂) destroy the phospholipid membranes. Our central idea was to inhibit the PLA₂ and Mel activities through histidine alkylation and or tryptophan oxidation (with pbb, para-bromo-phenacyl bromide, and/or NBS- N-bromosuccinimide, respectively) to make their encapsulations possible within stabilized liposomes. We strongly believe that this formulation will be nontoxic but immunogenic. In this paper, we present the whole bee venom conformation characterization during and after chemical modification and after interaction with liposome by ultraviolet, circular dichroism, and fluorescence spectroscopies. The PLA₂ and Mel activities were measured indirectly by changes in turbidity at 400_{n m}, rhodamine leak-out, and hemolysis. The native whole bee venom (BV) presented 78.06%?of α-helical content. The alkylation (A-BV) and succynilation (S-BV) of BV increased 0.44 and 0.20%?of its α-helical content. The double-modified venom (S-A-BV) had a 0.74%?increase of α-helical content. The BV chemical modification induced another change on protein conformations observed by Trp that became buried with respect to the native whole BV. It was demonstrated that the liposomal membranes must contain pbb (SPC:Cho:pbb, 26:7:1) as a component to protect them from aggregation and/or fusion. The membranes containing pbb maintained the same turbidity (100%) after incubation with modified venom, in contrast with pbb-free membranes that showed a 15%?size decrease. This size decrease was interpreted as membrane degradation and was corroborated by a 50%?rhodamine leak-out. Another fact that confirmed our interpretation was the observed 100%?inhibition of the hemolytic activity after venom modification with pbb and NBS (S-A-BV). When S-A-BV interacted with liposomes, other protein conformational changes were observed and characterized by the increase of 1.93%?on S-A-BV α-helical content and the presence of tryptophan residues in a more hydrophobic environment. In other words, the S-A-BV interacted with liposomal membranes, but this interaction was not effective to cause aggregation, leak-out, or fusion. A stable formulation composed by S-A-BV encapsulated within liposomes composed by SPC:Cho:pbb, at a ratio of 26:7:1, was devised. Large unilamellar vesicles of 202.5 nm with a negative surface charge (–24.29 mV) encapsulated 95%?of S-A-BV. This formulation can, now, be assayed on VIT.     

Semisolid media for isolation of Salmonella spp. from coastal waters

The use of two semisolid media (semisolid Rappaport and semisolid Rappaport-Vassiliadis) for the isolation of Salmonella spp. from coastal waters was compared with the use of conventional media. Two hundred and fifty six samples were studied; Salmonella spp. were detected in 83. The semisolid media were the most sensitive, detecting 73 samples instead of the 53 detected by the conventional media (P less than 0.001). The rate of isolation of Salmonella spp. showed an increase of 56.6% when the semisolid media were added to the conventional media, it being possible to detect 54.2% of the total organisms 1 day earlier.