Role of disulfide bonds in conformational stability and folding of 5′-deoxy-5′-methylthioadenosine phosphorylase II from the hyperthermophilic archaeon Sulfolobus solfataricus

Sulfolobus solfataricus 5′-deoxy-5′-melthylthioadenosine phosphorylase II (SsMTAPII), is a hyperthermophilic hexameric protein with two intrasubunit disulfide bonds (C138–C205 and C200–C262) and a CXC motif (C259–C261). To get information on the role played by these covalent links in stability and folding, the conformational stability of SsMTAPII and C262S and C259S/C261S mutants was studied by thermal and guanidinium chloride (GdmCl)-induced unfolding and analyzed by fluorescence spectroscopy, circular dichroism, and SDS-PAGE. No thermal unfolding transition of SsMTAPII can be obtained under nonreducing conditions, while in the presence of the reducing agent Tris-(2-carboxyethyl) phosphine (TCEP), a Tm of 100 °C can be measured demonstrating the involvement of disulfide bridges in enzyme thermostability. Different from the wild-type, C262S and C259S/C261S show complete thermal denaturation curves with sigmoidal transitions centered at 102 °C and 99 °C respectively. Under reducing conditions these values decrease by 4 °C and 8 °C respectively, highlighting the important role exerted by the CXC disulfide on enzyme thermostability. The contribution of disulfide bonds to the conformational stability of SsMTAPII was further assessed by GdmCl-induced unfolding experiments carried out under reducing and nonreducing conditions. Thermal unfolding was found to be reversible if the protein was heated in the presence of TCEP up to 90 °C but irreversible above this temperature because of aggregation. In analogy, only chemical unfolding carried out in the presence of reducing agents resulted in a reversible process suggesting that disulfide bonds play a role in enzyme denaturation. Thermal and chemical unfolding of SsMTAPII occur with dissociation of the native hexameric state into denatured monomers, as indicated by SDS-PAGE.     

Purification and pH stability characterization of a chymotrypsin inhibitor from Schizolobium parahyba seeds

Schizolobium parahyba chymotrypsin inhibitor (SPCI) was completely purified as a single polypeptide chain with two disulfide bonds, by TCA precipitation and ion exchange chromatography. This purification method is faster and more efficient than that previously reported: SPCI is stable from pH 2 to 12 at 25 degrees C, and is highly specific for chymotrypsin at pH 7-12. It weakly inhibits elastase and has no significant inhibitory effect against trypsin and alpha-amylase. SPCI is a thermostable protein and resists thermolysin digestion up to 70 degrees C.     

Partial purification and characterization of cysteine proteinase inhibitor from chicken plasma

A high-molecular-weight cysteine proteinase inhibitor (CPI) was purified from chicken (Gallus gallus) plasma using polyethylene glycol (PEG) fractionation and affinity chromatography on carboxymethyl–papain–Sepharose-4B. The CPI was purified 96.8-fold with a yield of 28.9%. Based on inhibitory activity staining for papain, CPI was shown to have an apparent molecular mass of 122 kDa. No inhibitory activity was obtained under reducing condition, indicating that CPI from chicken plasma was stabilized by disulfide bonds. CPI was stable in temperature ranges from 40 to 70 °C for 10 min; however, more than 50% of the inhibitory activity towards papain was lost within 30 min of heating at 90 °C. CPI was stable in the presence of salt up to 3%. The purified CPI exhibited the inhibitory activity toward autolysis of arrowtooth flounder (Atheresthes stomias) and Pacific whiting (Merluccius productus) natural actomyosin (NAM) in a concentration-dependent manner.     

Role of disulfide bonds in conformational stability and folding of 5'-deoxy-5'-methylthioadenosine phosphorylase II from the hyperthermophilic archaeon Sulfolobus solfataricus

Sulfolobus solfataricus 5'-deoxy-5'-melthylthioadenosine phosphorylase II (SsMTAPII), is a hyperthermophilic hexameric protein with two intrasubunit disulfide bonds (C138-C205 and C200-C262) and a CXC motif (C259-C261). To get information on the role played by these covalent links in stability and folding, the conformational stability of SsMTAPII and C262S and C259S/C261S mutants was studied by thermal and guanidinium chloride (GdmCl)-induced unfolding and analyzed by fluorescence spectroscopy, circular dichroism, and SDS-PAGE. No thermal unfolding transition of SsMTAPII can be obtained under nonreducing conditions, while in the presence of the reducing agent Tris-(2-carboxyethyl) phosphine (TCEP), a Tm of 100°C can be measured demonstrating the involvement of disulfide bridges in enzyme thermostability. Different from the wild-type, C262S and C259S/C261S show complete thermal denaturation curves with sigmoidal transitions centered at 102°C and 99°C respectively. Under reducing conditions these values decrease by 4°C and 8°C respectively, highlighting the important role exerted by the CXC disulfide on enzyme thermostability. The contribution of disulfide bonds to the conformational stability of SsMTAPII was further assessed by GdmCl-induced unfolding experiments carried out under reducing and nonreducing conditions. Thermal unfolding was found to be reversible if the protein was heated in the presence of TCEP up to 90°C but irreversible above this temperature because of aggregation. In analogy, only chemical unfolding carried out in the presence of reducing agents resulted in a reversible process suggesting that disulfide bonds play a role in enzyme denaturation. Thermal and chemical unfolding of SsMTAPII occur with dissociation of the native hexameric state into denatured monomers, as indicated by SDS-PAGE.     

Comparative Study of the Conformational Lock,Dissociative Thermal Inactivation and Stability of <Emphasis Type="Italic">Euphorbia</Emphasis> Latex and Lentil Seedling Amine Oxidases

The thermal stability of copper/quinone containing amine oxidases from Euphorbia characias latex (ELAO) and lentil seedlings (LSAO) was measured in 100 mM potassium phosphate buffer (pH 7.0) following changes in absorbance at 292 nm. ELAO was shown to be about 10°C more stable than LSAO. The dissociative thermal inactivation of ELAO was studied using putrescine as substrate at different temperatures in the range 47–70°C, and a “conformational lock” was developed using the theory pertaining to oligomeric enzyme. Moreover ELAO was shown to be more stable towards denaturants than LSAO, as confirmed by dodecyl trimethylammonium bromide denaturation curves. A comparison of the numbers of contact sites in inter-subunits of ELAO relative to LSAO led us to conclude that the higher stability of ELAO to temperature and towards denaturants was due to the presence of larger number of contact sites in the conformational lock of the enzyme. This study also gives a putative common mechanism for thermal inactivation of amine oxidases and explains the importance of C-terminal conserved amino acids residues in this class of enzymes.     

Contribution of disulfide bonds to the conformational stability and catalytic activity of ribonuclease A.

Disulfide bonds between the side chains of cysteine residues are the only common crosslinks in proteins. Bovine pancreatic ribonuclease A (RNase A) is a 124-residue enzyme that contains four interweaving disulfide bonds (Cys26-Cys84, Cys40-Cys95, Cys58-Cys110, and Cys65-Cys72) and catalyzes the cleavage of RNA. The contribution of each disulfide bond to the conformational stability and catalytic activity of RNase A has been determined by using variants in which each cystine is replaced independently with a pair of alanine residues. Thermal unfolding experiments monitored by ultraviolet spectroscopy and differential scanning calorimetry reveal that wild-type RNase A and each disulfide variant unfold in a two-state process and that each disulfide bond contributes substantially to conformational stability. The two terminal disulfide bonds in the amino-acid sequence (Cys26-Cys84 and Cys58-Cys110) enhance stability more than do the two embedded ones (Cys40-Cys95 and Cys65-Cys72). Removing either one of the terminal disulfide bonds liberates a similar number of residues and has a similar effect on conformational stability, decreasing the midpoint of the thermal transition by almost 40 degrees C. The disulfide variants catalyze the cleavage of poly(cytidylic acid) with values of kcat/Km that are 2- to 40-fold less than that of wild-type RNase A. The two embedded disulfide bonds, which are least important to conformational stability, are most important to catalytic activity. These embedded disulfide bonds likely contribute to the proper alignment of residues (such as Lys41 and Lys66) that are necessary for efficient catalysis of RNA cleavage.     

Effect of Sugars on Rabbit Serum Albumin Stability and Induction of Secondary Structure

The effect of sugars (sucrose, maltose, and glucose) on the thermal and chemical denaturation of rabbit serum albumin (RSA) has been examined by viscosity and far UV circular dichroism measurements. The viscosity measurements indicate a change in the reduced viscosity from 4.18 to 16.23 ml/g in the temperature range from 20 to 90°C. The T _m value for RSA obtained by viscosity measurements in the absence of sugar was found to be 63.2°C, but this value increased to 68.4, 70.3, and 73.2°C in the presence of 0.5 M sucrose, 0.5 M glucose, and 0.5 M maltose, respectively. Further, the stability of RSA in the presence of 0.5 M sugars was also investigated by measuring the mean residue ellipticity at 222 nm (MRE₂₂₂) using chemical (0-6 M guanidine hydrochloride) and thermal (20-90°C) transition processes. At the midpoint of the chemical denaturation, the increase in the MRE values at 222 nm in the presence of 0.5 M sugars were of the same order as the increase in the T _m values, i.e., maltose > glucose > sucrose. Interestingly, a mixture of 0.25 M glucose and 0.25 M fructose showed a cumulative effect on the thermal as well as chemical stability as compared to 0.5 M sucrose alone. In the case of both thermal and chemical denaturation, there was an increase in the MRE₂₂₂ values upon addition of various sugars, this indicating induction of secondary structure in the protein.     

The role of disulfide bonds in the conformational stability and catalytic activity of phytase.

Previous studies have predicted five disulfide bonds in Aspergillus niger phytase (phy A). To investigate the role of disulfide bonds, intrinsic fluorescence spectra, far-ultraviolet circular dichroism (CD) spectra, and an enzyme activity assay were used to compare the differences of catalytic activity and conformational stability of phytase during denaturation in urea in the presence and absence of dithiothreitol (DTT). In the presence of 2 mM DTT, the inactivation and unfolding were greatly enhanced at the same concentration of denaturant. The fluorescence emission maximum red shift and decreases of ellipticity at 222 nm were in accord with the changes of catalytic activity. The kinetics of the unfolding courses were a biphasic process consisting of two first-order reactions in the absence of DTT and a monophasic process of a first-order reaction in the presence of DTT. The results suggested that the loss of enzymatic activity was most likely because of a conformational change, and that disulfide bonds played an important role in three-dimensional structure and catalytic activity.     

Changing the determinants of protein stability from covalent to non-covalent interactions by in vitro evolution: a structural and energetic analysis

The three disulfide bonds of the gene-3-protein of the phage fd are essential for the conformational stability of this protein, and it unfolds when they are removed by reduction or mutation. Previously, we used an iterative in vitro selection strategy to generate a stable and functional form of the gene-3-protein without these disulfides. It yielded optimal replacements for the disulfide bonds as well as several stabilizing second-site mutations. The best selected variant showed a higher thermal stability compared with the disulfide-bonded wild-type protein. Here, we investigated the molecular basis of this strong stabilization by solving the crystal structure of this variant and by analyzing the contributions to the conformational stability of the selected mutations individually. They could mostly be explained by improved side-chain packing. The R29W substitution alone increased the midpoint of the thermal unfolding transition by 14 deg and the conformational stability by about 25 kJ mol^− 1. This key mutation (i) removed a charged side chain that forms a buried salt bridge in the disulfide-containing wild-type protein, (ii) optimized the local packing with the residues that replace the C46-C53 disulfide and (iii) improved the domain interactions. Apparently, certain residues in proteins indeed play key roles for stability.     

Galacto-oligosaccharide production by a thermostable recombinant β-galactosidase from <Emphasis Type="Italic">Thermotoga maritima</Emphasis>

Summary A β-galactosidase from Thermotoga maritima produced galacto-oligosaccharides (GOS) from lactose by transgalactosylation when expressed in Escherichia coli. The enzyme activity for GOS production was maximal at pH 6.0 and 90 °C. In thermal stability experiments, the enzyme followed first-order kinetics of pH and thermal inactivation, and half-lives at pH 5.0, pH 8.0, 80 °C, and 95 °C were 27 h, 82 h, 41 h, and 14 min, respectively, suggesting that the enzyme was stable below 80 °C and in the pH range of 5.0–8.0. Mn²⁺ was the most effective divalent cation for GOS production. Cu²⁺ and EDTA inhibited more than 84% of enzyme activity. GOS production increased with increasing lactose concentrations and peaked at 500 g lactose/l. Among tested enzyme concentrations, the highest production of GOS was obtained at 1.5 units enzyme/ml. Under the optimal conditions of pH 6.0, 80 °C, 500 g lactose/l, and 1.5 units enzyme/ml, GOS production was 91 g/l for 300 min, with a GOS productivity of 18.2 g/l · h and a conversion yield of GOS to lactose of 18%.     

Impact of legume seed extracts on degradation and functional properties of gelatin from unicorn leatherjacket skin

Trypsin inhibitor was extracted from the seed flour of soybean (SB; Glycine max), mung bean (MB; Vigna radiata), cowpea bean (CP; Vigna unguiculata) and adzuki bean (AB; Vigna angularis) using 0.15 M NaCl, followed by heat precipitation at 70 °C. The extract from SB showed the highest specific trypsin inhibitory activity, followed by those from MB, CP and AB, respectively. Based on inhibitory activity staining, molecular weights (MWs) of trypsin inhibitor from SB, MB, CP and AB were 20.1, 14, 10 and 13 kDa, respectively. The SB extract powder (SBEP) containing trypsin inhibitor in the range of 10–100 TIU/g effectively prevented the degradation of γ-, β- and α-chains of collagenolytic proteins of leatherjacket skin subjected to incubation at 50 °C for 30 min. The impact of SBEP on the extraction yield, physical and functional properties of gelatin from leatherjacket skin was investigated. The gelatin extracted in the presence of SBEP contained α₁ and α₂ chains as the predominant components with some degradation peptides. FTIR spectra indicated the significant loss of molecular order of triple helix and higher degradation was found in gelatin extracted in the absence of SBEP. Gelatin extracted in the presence of SBEP had the higher gel strength (232.8–268.5 g) than that extracted in the absence of SBEP (90.4 g). Higher foam stability (FS) but lower emulsion stability index (ESI) was observed in the former. Therefore, the addition of SBEP effectively prevented the degradation of gelatin from the skin of unicorn leatherjacket, thereby yielding the gelatin with improved gel strength and foam stability.     

Denaturation and unfolding of human anaphylatoxin C3a: an unusually low covalent stability of its native disulfide bonds

The complement C3a anaphylatoxin is a major molecular mediator of innate immunity. It is a potent activator of mast cells, basophils and eosinophils and causes smooth muscle contraction. Structurally, C3a is a relatively small protein (77 amino acids) comprising a N-terminal domain connected by 3 native disulfide bonds and a helical C-terminal segment. The structural stability of C3a has been investigated here using three different methods: Disulfide scrambling; Differential CD spectroscopy; and Reductive unfolding. Two uncommon features regarding the stability of C3a and the structure of denatured C3a have been observed in this study. (a) There is an unusual disconnection between the conformational stability of C3a and the covalent stability of its three native disulfide bonds that is not seen with other disulfide proteins. As measured by both methods of disulfide scrambling and differential CD spectroscopy, the native C3a exhibits a global conformational stability that is comparable to numerous proteins with similar size and disulfide content, all with mid-point denaturation of [GdmCl]_1/2 at 3.4-5 M. These proteins include hirudin, tick anticoagulant protein and leech carboxypeptidase inhibitor. However, the native disulfide bonds of C3a is 150-1000 fold less stable than those proteins as evaluated by the method of reductive unfolding. The 3 native disulfide bonds of C3a can be collectively and quantitatively reduced with as low as 1 mM of dithiothreitol within 5 min. The fragility of the native disulfide bonds of C3a has not yet been observed with other native disulfide proteins. (b) Using the method of disulfide scrambling, denatured C3a was shown to consist of diverse isomers adopting varied extent of unfolding. Among them, the most extensively unfolded isomer of denatured C3a is found to assume beads-form disulfide pattern, comprising Cys³⁶-Cys⁴⁹ and two disulfide bonds formed by two pair of consecutive cysteines, Cys²²-Cys²³ and Cys⁵⁶-Cys⁵⁷, a unique disulfide structure of polypeptide that has not been documented previously.     

Conformational stability and activity of ribonuclease T1 with zero, one, and two intact disulfide bonds

Ribonuclease T1 has two disulfide bonds linking cysteine residues 2-10 and 6-103. We have prepared a derivative of ribonuclease T1 in which one disulfide bond is broken and the cysteine residues carboxymethylated, (2-10)-RCM-T1, and three derivatives in which both disulfides are broken and the cysteine residues reduced, R-T1, carboxamidomethylated, RCAM-T1, or carboxymethylated, RCM-T1. The RNA hydrolyzing activity of these proteins has been measured, and urea and thermal denaturation studies have been used to determine conformational stability. The activity, melting temperature, and conformational stability of the proteins are: ribonuclease T1 (100%, 59.3 degrees C, 10.2 kcal/mol), (2-10)-RCM-T1 (86%, 53.3 degrees C, 6.8 kcal/mol), R-T1 (53%, 27.2 degrees C, 3.0 kcal/mol), RCAM-T1 (43%, 21.2 degrees C, 1.5 kcal/mol), and RCM-T1 (35%, 16.6 degrees C, 0.9 kcal/mol). Thus, the conformational stability is decreased by 3.4 kcal/mol when one disulfide bond is broken and by 7.2-9.3 kcal/mol when both disulfide bonds are broken. It is quite remarkable that RNase T1 can fold and function with both disulfide bonds broken and the cysteine residues carboxymethylated. The large decrease in the stability is due mainly to an increase in the conformational entropy of the unfolded protein which results when the constraints of the disulfide bonds on the flexibility are removed. We propose a new equation for predicting the effect of a cross-link on the conformational entropy of a protein: delta Sconf = -2.1 - (3/2)R 1n n, where n is the number of residues between the side chains which are cross-linked. This equation gives much better agreement with experimental results than other forms of this equation which have been used previously.     

Influence of disulfide bonds on the conformational changes and activities of refolded phytase

Aspergillus sp. phytase contains five disulfide bonds. In order to elucidate their role, the reactivation and refolding of phytase in the absence and presence of dithiothreitol (DTT) was investigated. The results indicated that the disulfide bonds play an important role in the catalytic activity and conformational stability of the enzyme.     

Reductive cleavage and regeneration of the disulfide bonds inStreptomyces subtilisin inhibitor (SSI) as studied by the carbonyl13C NMR resonances of cysteinyl residues

Summary Four enhanced carbonyl carbon resonances were observed whenStreptomyces subtilisin inhibitor (SSI) was labeled by incorporating specifically labeled [1-¹³C]Cys. The¹³C signals were assigned by the¹⁵N,¹³C double-labeling method along with site-specific mutagenesis. Changes in the spectrum of the labeled protein ([C]SSI) were induced by reducing the disulfide bonds with various amounts of dithiothreitol (DTT). The results indicate that, in the absence of denaturant, the Cys⁷¹-Cys¹⁰¹ disulfide bond of each SSI subunit can be reduced selectively. This disulfide bond, which is in the vicinity of the reactive site scissile bond Met⁷³-Val⁷⁴, is more accessible to solvent than the other disulfide bond. Cys³⁵-Cys⁵⁰, which is embedded in the interior of SSI. This half-reduced SSI had 65% of the inhibitory activity of native SSI and maintained a conformation similar to that of the fully oxidized SSI. Reoxidation of the half reduced-folded SSI by air regenerates fully active SSI which is indistinguishable with intact SSI by NMR. In the presence of 3 M guanidine hydrochloride (GuHCl), however, both disulfide bonds of each SSI subunit were readily reduced by DTT. The fully reduced-unfolded SSI spontaneously refolded into a native-like structure (fully reduced-folded state), as evidenced by the Cys carbonyl carbon chemical shifts, upon removing GuHCl and DTT from the reaction mixture. The time course of disulfide bond regeneration from this state by air oxidation was monitored by following the NMR spectral changes and the results indicated that the disulfide bond between Cys⁷¹ and Cys¹⁰¹ regenerates at a much faster rate than that between Cys³⁵ and Cys⁵⁰.Nomenclature of the various states of SSI that are observed in the present study Fully oxidized-folded native or intact (without GuHCl or DTT) - half reduced-folded (Cys⁷¹-Cys¹⁰¹ reduced; DTT without GuHCl) - inversely half reduced-folded (Cys³⁵-Cys⁵⁰ reduced; a reoxidation intermediate from fully reduced-folded state) - fully reduced-unfolded (reduced by DTT in the presence of GuHCl) - fully reduced-folded (an intermediate state obtained by removing DTT and GuHCl from the fully reduced-unfolded SSI reaction mixture)     

The Role of Intermolecular Disulfide Bonds in Stabilizing the Structure of Peroxiredoxins

The comparative characterization of thermal stability of human peroxiredoxins 1–6 (Prx1–Prx6) has been performed by physicochemical and biochemical methods and the role of disulfide bonds in stabilizing their structure has been shown. Prx1 and Prx2 among the tested peroxiredoxins exhibit the highest peroxidase activity and thermal stability. Prx1 and Prx2 are more than 2 times more active on average with H₂O₂ and tert-butyl hydroperoxide as substrates compared to other peroxiredoxins and retain at least 50% activity after 30 min heating at a temperature of 64°C, which is more than 10°C higher compared to Prx3–Prx6. The reduction of the disulfide bonds between Prx1 and Prx2 leads to a decrease of their thermal stability, comparable to the thermal stability of Prx3–Prx6, which confirms the important role of the intermolecular S–S bonds in stabilizing the structure of these proteins.     

Impact of disulfide bonds on the folding and refolding capability of a novel thermostable GH45 cellulase

A new cellulase (TaCel45) of glycoside hydrolase family 45 was identified in the thermophilic fungus Thielavia arenaria XZ7 and was successfully expressed in Pichia pastoris. The specific activities of TaCel45 towards lichenin, sodium carboxymethylcellulose (CMC-Na), and barley β-glucan were 769, 498, and 486 U/mg protein, respectively, which are higher than the values for all other reported GH45 cellulases. TaCel45 had maximum activity at pH 5.0–6.0 and 60–65 °C with barley β-glucan and CMC-Na as substrates and had a melting temperature (T_m) of 68.4 °C. However, TaCel45 exhibited extraordinary thermostability at 90 and 100 °C, retaining more than 70 and 45% of its activity after a 1-h incubation, respectively. Seven mutants (C11S, C12S, C16S, C31S, C171S, C193S, and C203S) were then constructed to investigate the effects of each disulfide bond on the structure, activity, and stability of TaCel45. As a result, six disulfide bonds (C11-C136, C16-C87, C31-C57, C88-C203, C90-C193, and C160-Cy171) were found to be indispensable for the folding, secretion, and activity of TaCel45, while C12-C48 was critical for thermal adaptation and refolding. The mutant C12S showed decreased optimal temperature and T_m values of 50 and 60.2 °C, respectively, and retained less than 50% of the thermal refolding ability of the wild type. Overall, this study demonstrated that disulfide bonds play a vital role in the folding and refolding capability and thermostability of this GH45 cellulase.

     

Conformational preferences in diglycosyl disulfides: NMR and molecular modeling studies

The conformations of several β1→β1′ diglycosyl disulfides were investigated by NMR and computational methods. Experimental data, such as NOEs, proton–proton and proton–carbon-13 coupling constants, measured for solutions in DMSO, are in good agreement with values obtained by MD simulations in explicit DMSO. The disulfide torsion angles (C1–S–S–C1′) preferentially sample values close to either +90° or −90° (+g or −g) and appear as the main metric that determines the conformational behavior of these glycomimetics. There is more conformational freedom around the C1–S and C1′–S′ bonds (Φ and Ω torsions, respectively) and population cluster analysis allowed to identify up to four allowed conformational regions for each of the +g or −g forms. Population analysis of the hydroxylic group rotamers, based on proton–proton and proton–carbon-13 couplings as well as on calculated hydrogen bonding statistics, did not reveal any significant intramolecular hydrogen bonds in DMSO solution.     

A trypsin inhibitor from <Emphasis Type="Italic">Cassia obtusifolia</Emphasis> seeds: isolation,characterization and activity against <Emphasis Type="Italic">Pieris rapae</Emphasis>

A trypsin inhibitor was isolated from Cassia obtusifolia by ammonium sulfate precipitation, Sepharose 4B-trypsin affinity and Sephadex G-75 chromatography. The inhibitor consisted of a single polypeptide chain with a molecular mass of 19, 812.55 Da. It was stable from pH 2 to 12 for 24 h, whereas it was unstable either above 70°C for 10 min or under reduced conditions. The inhibitor, which inhibited trypsin activity with an apparent Ki of 0.3 μM, had one reactive site involving a lysine residue. The native inhibitor was resistant to pepsin digestion, whereas the heated inhibitor produced 40% degree of susceptibility. The disulfide linkage and lysine residue were important in maintaining its conformation. Partial amino acid sequence of the purified protein showed a high degree of homology with various members of the Kunitz inhibitor family. Moreover, the inhibitor showed significant inhibitory activity against trypsin-like proteases present in the larval midgut on Pieris rapae and could suppress the growth of larvae.     

Kunitz-type trypsin inhibitor with high stability from <Emphasis Type="Italic">Spinacia oleracea</Emphasis> L. seeds

The trypsin inhibitor SOTI was isolated from Spinacia oleracea L. seeds through ammonium sulfate precipitation, Sepharose 4B-trypsin affinity chromatography, and Sephadex G-75 chromatography. This typical Kunitz inhibitor showed remarkable stability to heat, pH, and denaturant. It retained 80% of its activity against trypsin after boiling for 20 min, and more than 90% activity when treated with 6 M guanidine hydrochloride. The formation of stable SOTI-trypsin complex (K _i = 2.3·10⁻⁶ M) is consistent with significant inhibitory activity of SOTI against trypsin-like proteinases present in the larval midgut of Pieris rapae. Sequences of SOTI fragments showed homology with other inhibitors. Published in Russian in Biokhimiya, 2009, Vol. 74, No. 1, pp. 131–140.