The role of lipopolysaccharide structure in the recipient cell during plasmid-mediated bacterial conjugation

The role of the lipopolysaccharide (LPS) structure in the recipient cell during bacterial conjugation was studied using a series of well-defined LPS mutations in Salmonella minnesota. The plasmids Flac (IncFI) and R1drd19 (IncFII) transferred at a high frequency to the smooth S218 parent strain and the rough LPS mutants. However, R64drd1 1 (IncI alpha) transferred poorly to the LPS mutants compared with transfer to the smooth LPS parent strain. The decrease in R64drd1 1 transfer frequency correlated with the extent of the defect in LPS structure, suggesting that intact LPS on the recipient is a major requirement for R64drd1 1 mating. Transfer of the P-group plasmid, RK2, was not affected by changes in LPS structure. These results show that plasmids use different cell surface structures during conjugation, and that LPS is particularly important for R64drd1 1 transfer.     

In situ monitoring of IncF plasmid transfer on semi-solid agar surfaces reveals a limited invasion of plasmids in recipient colonies

Most natural conjugative IncF plasmids encode a fertility inhibition system that represses transfer gene expression in the majority of plasmid-carrying cells. The successful spread of these plasmids in clinically relevant bacteria has been suggested to be supported by a transitory derepression of transfer gene expression in newly formed transconjugants. In this study, we aimed to monitor the extent of transitory derepression during agar surface matings in situ by comparing plasmid spread of the IncF plasmid R1 and its derepressed mutant R1drd19 at low initial cell densities. A zygotic induction strategy was used to visualize the spatial distribution of fluorescent transconjugants within the heterogeneous environment. Epifluorescence and confocal microscopy revealed different transfer patterns for both plasmids, however, spread beyond the first five recipient cell layers adjacent to the donor cells was not observed. Similar results were observed for other prototypical conjugative plasmids. These results cannot rule out that transitory derepression contributes to the limited R1 plasmid invasion, but other factors like nutrient availability or spatial structure seem to limit plasmid spread.     

Plasmid Specificity of The Origin of Transfer of Sex Factor F

The ability of F-like plasmids to promote transfer from the F origin of transfer was determined. Chromosome transfer was measured from plasmid derivatives of RecA(-) Hfr deletion strains which had lost all the F transfer genes but which in some cases retained, and in others had also lost, the origin sequence. ColV2 and ColVBtrp could initiate transfer from the F origin, but R100-1, R1-19, and R538-1 drd could not. These results can be correlated with the plasmid specificity of the traI components of the different plasmid transfer systems, supporting the hypothesis that the origin of transfer is the site of action of the traI product. Most F-like plasmids, including R1-19 and R538-1 drd, could transfer ColE1, consistent with previous findings that the (plasmid-specific) traI product is not necessary for ColE1 transfer by Flac; ColE1 transfer may be initiated by a ColE1-or host-determined product. R100-1 and R136fin(-) could not transfer ColE1 efficiently, apparently because of differences residing in their pilus-forming genes.     

Intergeneric transfer and exchange recombination of restriction fragments cloned in pBR322: a novel strategy for the reversed genetics of the Ti plasmids of Agrobacterium tumefaciens

Transmission of ColE1/pMB1-derived plasmids, such as pBR322, from Escherichia coli donor strains was shown to be an efficient way to introduce these plasmids into Agrobacterium. This was accomplished by using E. coli carrying the helper plasmids pGJ28 and R64drd11 which provide the ColE1 mob functions and tra functions, respectively. For example, the broad host-range replication plasmid, pGV1150, a co-integrate plasmid between pBR322 and the W-type mini-Sa plasmid, pGV1106, was transmitted from E. coli to A. tumefaciens with a transfer frequency of 4.5 x 10(-3). As pBR322 clones containing pTiC58 fragments were unable to replicate in Agrobacterium, these clones were found in Agrobacterium only if the acceptor carried a Ti plasmid, thus allowing a co-integration of the pBR322 clones with the Ti plasmid by homology recombination. These observations were used to develop an efficient method for site-specific mutagenesis of the Ti plasmids. pTiC58 fragnents, cloned in pBR322, were mutagenized in vitro and transformed into E. coli. The mutant clones were transmitted from an E. coli donor strain containing pGJ28 and R64drd11 to an Agrobacterium containing a target Ti plasmid. Selecting for stable transfer of the mutant clone utilizing its antibiotic resistance marker(s) gave exconjugants that already contained a co-integrate plasmid between the mutant clone and the Ti plasmid. A second recombination can dissociate the co-integrate plasmid into the desired mutant Ti plasmid and a non-replicating plasmid formed by the vector plasmid pBR322 and the target Ti fragment. These second recombinants lose the second plasmid and they are identified by screening for the appropriate marker combination.     

Complementation analysis of derepressed mutants of F-like plasmids of Escherichia coli

Complementation analysis of a number of conjugative transfer functions was performed in derepressed (drd) mutants of E. coli F-like plasmids. The major part of double plasmid complexes investigated has revealed the formation of complementation transfer inhibitor of Fin V-type, or less frequently--the formation of Fin U-type inhibitor. An additional complementation analysis of drd plasmids defective at Fin V region genes has demonstrated at least three genes (denoted A, B, C) in the structure of this region.     

Partial suppression of the phenotype of Escherichia coli K-12 dnaG mutants by some I-like conjugative plasmids.

Three I-like conjugative plasmids, ColIdrd1, R144drd3, and R64drd11, which are derepressed for functions involved in conjugation, were found to suppress at least partially the phenotype of temperature-sensitive dnaG mutants of Escherichia coli K-12, as judged from the kinetics of deoxyribonucleic acid synthesis at elevated temperature in newly formed and established plasmid-containing strains. In contrast, the corresponding wild-type plasmids and three F-like derepressed conjugative plasmids, F101, R100drd1, and R1drd16, all failed to suppress. Suppression is presumably caused by a different plasmid-determined function from that which promotes survival of ultraviolet-irradiated bacteria, because both the wild-type I-like plasmids and their drd mutants protected irradiated bacteria. One possible interpretation of these results is that the product of a gene carried by certain I-like plasmids can substitute for the bacterial dnaG gene product during ongoing deoxyribonucleic acid replication.     

Conjugal transfer of cloning vectors derived from ColE1.

The transfer properties of five cloning vectors derived from ColE1 were studied. Two of the vectors (pSF2124 and pGM706) behaved like wild type ColE1 in that they could be transferred efficiently in the presence of the conjugative plasmid F. The mobilization of the remaining three vectors (pMB9, PBR313 and pBR322) by F was barely detectable. The transfer defect in pBR313 and pBR322 could be complemented by ColK when R64drd11, but not F, was used as the conjugative plasmid. The transferred plasmids could be recovered unchanged from recipients. Conjugal transfer is a potentially useful technique for screening hybrid plasmids in low-risk cloning experiments involving poorly transformable strains.     

Dynamics of plasmid transfer on surfaces

A protocol was developed to study the dynamics of growth and plasmid transfer in surface populations of bacteria. This method allows for quantitative estimates of cell population densities over time, as well as microscopic observations of colony growth and interactions. Using this 'surface slide system' (SSS), the dynamics of the plasmid R1 and its permanently derepressed mutant R1drd19 in surface cultures of Escherichia coli K12 was examined. In surface culture, the stationary-phase cell densities were constant over a wide range of initial cell density (= colony density) and comparable to those obtained in liquid culture. For high initial cell densities, where the cells formed a confluent layer at stationary phase, the kinetics of growth and plasmid transfer was similar to that obtained in liquid culture, and the relative yields of R1drd19 and R1 transconjugants were similar in the two habitats. In surface culture, however, R1drd19 transconjugant yield was profoundly affected, and R1 transfer to a lesser extent, by colony density. In contrast, liquid matings were virtually unaffected by initial cell density. The transfer advantage of the permanently depressed over the repressed plasmid was much less apparent for lower colony densities. I propose a hypothesis for plasmid transfer between colonies that explains these observations as a consequence of the geometry of the surface habitat and the effect of transitory derepression of the synthesis of pili.     

The R1 conjugative plasmid increases Escherichia coli biofilm formation through an envelope stress response

Differential gene expression in biofilm cells suggests that adding the derepressed conjugative plasmid R1drd19 increases biofilm formation by affecting genes related to envelope stress (rseA and cpxAR), biofilm formation (bssR and cstA), energy production (glpDFK), acid resistance (gadABCEX and hdeABD), and cell motility (csgBEFG, yehCD, yadC, and yfcV); genes encoding outer membrane proteins (ompACF), phage shock proteins (pspABCDE), and cold shock proteins (cspACDEG); and phage-related genes. To investigate the link between the identified genes and biofilm formation upon the addition of R1drd19, 40 isogenic mutants were classified according to their different biofilm formation phenotypes. Cells with class I mutations (those in rseA, bssR, cpxA, and ompA) exhibited no difference from the wild-type strain in biofilm formation and no increase in biofilm formation upon the addition of R1drd19. Cells with class II mutations (those in gatC, yagI, ompC, cspA, pspD, pspB, ymgB, gadC, pspC, ymgA, slp, cpxP, cpxR, cstA, rseC, ompF, and yqjD) displayed increased biofilm formation compared to the wild-type strain but decreased biofilm formation upon the addition of R1drd19. Class III mutants showed increased biofilm formation compared to the wild-type strain and increased biofilm formation upon the addition of R1drd19. Cells with class IV mutations displayed increased biofilm formation compared to the wild-type strain but little difference upon the addition of R1drd19, and class V mutants exhibited no difference from the wild-type strain but increased biofilm formation upon the addition of R1drd19. Therefore, proteins encoded by the genes corresponding to the class I mutant phenotype are involved in R1drd19-promoted biofilm formation, primarily through their impact on cell motility. We hypothesize that the pili formed upon the addition of the conjugative plasmid disrupt the membrane (induce ompA) and activate the two-component system CpxAR as well as the other envelope stress response system, RseA-sigma(E), both of which, along with BssR, play a key role in bacterial biofilm formation.     

finO sequences on conjugally repressed and derepressed F-like plasmids

DNA-DNA hybridization studies have demonstrated the physical relatedness of the fertility inhibition gene, finO, among both FinO+ and FinO- F-like conjugative plasmids, viz. ColV2-K94, R100-1,R1drd19,R1,R6-5, UCR123, R386, p307, R453, R773, and pIP162-1. Furthermore, the data indicate that finO sequences on the FinO- plasmid ColV2-K94 map downstream of the transfer region, within 93.6-95.3 ColV2-K94.     

The structure of R1drd19: a revised physical map of the plasmid

We have analyzed derivatives of the plasmid R1drd19 carrying the transposon Tn10 by electron microscopy following denaturation and renaturation of the molecules, and by digestion with various restriction enzymes, gel electrophoresis and Southern blotting. We show: 1) that the published restriction map of R1drd19 is inconsistent with our results. We present a modified map which is consistent with our data. 2) that R1drd19 carries a single resident copy of the element IS10 which is normally associated with Tn10 as an inverted repeat, and 3) that R1drd19 carries three copies of the insertion element IS1 in the resistance determinant region.     

Informing plasmid compatibility with bacterial hosts using protein-protein interaction data

The compatibility of plasmids with new host cells is significant given their role in spreading antimicrobial resistance (AMR) and virulence factor genes. Evaluating this using in vitro screening is laborious and can be informed by computational analyses of plasmid-host compatibility through rates of protein-protein interactions (PPIs) between plasmid and host cell proteins. We identified large excesses of such PPIs in eight important plasmids, including pOXA-48, using most known bacteria (n = 4363). 23 species had high rates of interactions with four blaOXA-48-positive plasmids. We also identified 48 species with high interaction rates with plasmids common in Escherichia coli. We found a strong association between one plasmid and the fimbrial adhesin operon pil, which could enhance host cell adhesion in aqueous environments. An excess rate of PPIs could be a sign of host-plasmid compatibility, which is important for AMR control given that plasmids like pOXA-48 move between species with ease.     

Isolation and genetic characterizaion of Escherichia coli K-12 mutations affecting bacteriophage T5 restriction by the ColIb plasmid.

A mutant derivative of Escherichia coli K-12 has been isolated which is permissive for bacteriophage T5 infection even when harboring a wild-type ColIb plasmid. The fully permissive phenotype was the result of two mutations that are located near the rpsL-rpsE region on the E. coli chromosome and are recessive to the wild-type alleles. These mutations had little or no effect on induction of colicin synthesis and did not affect the expression of antibiotic resistance by the resistance plasmids R64drd11 or R1drd19. Cells harboring the mutant alleles grew more slowly than isogenic wild-type derivatives in either minimal or complete media.     

Lateral transfer of rfb genes: a mobilizable ColE1-type plasmid carries the rfbO:54 (O:54 antigen biosynthesis) gene cluster from Salmonella enterica serovar Borreze.

Plasmid pWQ799 is a 6.9-kb plasmid isolated from Salmonella enterica serovar Borreze. Our previous studies have shown that the plasmid contains a functional biosynthetic gene cluster for the expression of the O:54 lipopolysaccharide O-antigen of this serovar. The minimal replicon functions of pWQ799 have been defined, and a comparison with nucleotide and protein databases revealed this replicon to be virtually identical to ColE1. This is the first report of involvement of ColE1-related plasmids in O-antigen expression. The replicon of pWQ799 is predicted to encode two RNA molecules, typical of other ColE1-type plasmids. RNAII, the putative replication primer from pWQ799, shares regions of homology with RNAII from ColE1. RNA1 is an antisense regulator of DNA replication in ColE1-related plasmids. The coding region for RNAI from pWQ799 shares no homology with any other known RNAI sequence but is predicted to adopt a secondary structure characteristic of RNAI molecules. pWQ799 may therefore represent a new incompatibility group within this family. pWQ799 also possesses cer, rom, and mob determinants, and these differ minimally from those of ColE1. The plasmid is mobilizable in the presence of either the broad-host-range helper plasmid pRK2013 or the IncI1 plasmid R64drd86. Mobilization and transfer of pWQ799 to other organisms provides the first defined mechanism for lateral transfer of O-antigen biosynthesis genes in S. enterica and explains both the distribution of related plasmids and coexpression of the O:54 factor with other O-factors in different Salmonella serovars. The base composition of the pWQ799 replicon sequences gives an average percent G+C value typical of Salmonella spp. In contrast, the percent G+C value is dramatically lower with rfb0:54, consistent with the possibility that the cluster was acquired from an organism with much lower G+C composition.     

Conjugal transfer replication of R64drd11 plasmid DNA in the donor cells of Escherichia coli K-12

Summary Conjugation, the process of genetic transfer requiring cell-to-cell contact, has been the focus of many investigations. In recent years, the molecular aspect of conjugation has been questioned. Since it has been shown that during exponential growth plasmid DNA forms a complex with the folded chromosomal complex (FCC), the relationship of R64drd11 plasmid DNA to the FCC (chromosome plus membrane) during conjugal replication was examined. A cell system was used which allowed specific observation of conjugal events as they occurred in the donor cell. Evidence is presented to show that conjugally replicating R64drd11 covalently closed circular molecules co-sediment with the FCC in neutral sucrose gradients. The use of density gradients to separate DNA from membrane-bound DNA from free membrane, indicate that the membrane is the preferential structure for conjugally replicating plasmid DNA association.     

Plasmids in Frankia sp.

A method to achieve cell lysis and isolate Frankia sp. plasmid DNA was developed. A screening of Frankia sp. strains belonging to different host compatibility groups (Alnus sp., Elaeagnus sp., Ceanothus sp.) showed that, of 39 strains tested, 4 (strains Cp11, ARgN22d, ArI3, and EUN1f) possessed plasmids ranging in size from 7.1 to 32.2 kilobase pairs as estimated from agarose gel electrophoresis and electron microscopy. A total of 11 plasmids were detected.     

Comparative analysis of eight Arthrobacter plasmids

Despite the prevalence of Arthrobacter in the environment little is known about their plasmids, or the capacity of Arthrobacter plasmids to mediate horizontal gene transfer. In this study, we compared eight plasmids from five Arthrobacter strains in order to identify putative core maintenance genes for replication, segregation, and conjugation. Iteron like sequences were identified on some of the plasmids; however, no genes with obvious similarity to known replication sequences such as an origin of replication, or rep genes were identified. All eight plasmids contained a putative conjugation system. Genes with similarity to a relaxase, coupling protein, and various components of a type IV secretion system were identified on each plasmid; it appears that three different systems may be present. Putative parA partitioning genes were found in all of the plasmids. Each of the Arthrobacter strains examined contained a putative parB gene; however, of the three plasmids in Arthrobacter strain FB24 only one plasmid had a putative parB gene. Cluster analysis of many of the Arthrobacter genes suggested that they often formed branches within existing families of plasmid maintenance genes. Comparison of a concatenation of all the maintenance genes from each plasmid suggests that the eight Arthrobacter plasmids represent multiple evolutionary pathways.     

Cell wall lipopolysaccharide response to the ColIb plasmid mutants.

Mutants of ColIb plasmid affected the synthesis of O-side chains of lipopolysaccharides (LPS) in Salmonella. The plasmid srd 25 (defective in colicin synthesis) caused a significant decline of rhamnose and mannose content and lack of abequose in LPS of S. typhimurium. The number of repeating units in O-side chains was decreased after the indroduction of srd 25. Cultures of S. typhimurium and S. enteritidis harboring drd2 (derepressed in colicin production) polymerised dideoxyhexose-defective O-side chains i.e. deprived of abequose and tyvelose, respectively. In dideoxyhexoseless S. meleagridis the content of rhamnose and mannose were reduced. The information for the alterations of Salmonella LPS was contained in the plasmid genome. In the wild-type plasmids the genes controlling the O-antigen changes were not expressed.     

Identification of functional regions of the colicinogenic plasmid ColA

Summary ColA is a colicinogenic plasmid of 6.72 kb. It is compatible with ColE1 but not with ColK. Transposon insertion mutagenesis as well as complementation studies have been carried out to investigate the location of the various functional regions of this plasmid. Four independent ColA::Tn1 and one ColA::Tn3 plasmids were isolated and the locations of insertions were determined. From these plasmids, six different deletion mutants were constructed. In addition, various restriction fragments of ColA have been cloned into pUC8 to carry out complementation studies. We have thus confirmed the location of the DNA regions involved in colicin production, colicin release and immunity function. The DNA region involved in conjugal mobility promoted by R64 drd11 has been identified and we have demonstrated that the ColE1 mobility proteins can act in trans on the bom (basis of mobility) site of ColA. The location of this site, as well as the region involved in stable maintenance of ColA, have also been determined. These results are discussed with regard to the homology in nucleotide sequence between ColA and ColE1.