人类混血群体连锁不平衡的遗传学模型与基因定位

人类混血群体可以说是混合群体的一种特例．在无选择、无突变、无限随机交配群体的假定前提下,研究了亲本群体的基因频率对混血群体及其衍生后代群体连锁不平衡结构的影响,导出了各群体连锁不平衡值的表达式,建立了一个估计基因间重组率的简便方法;同时, 采用估算分子标记与QTL之间连锁不平衡系数的统计分析方法,分析了人类混血群体及其衍生后代群体QTL检测与估计的关系,建立了该关系的系列理论公式．研究结果表明,本方法不仅适用于人类疾病(包括复杂遗传疾病)基因定位,而且适合于人类正常基因的定位,同时也适用于人类普通多基因性状的QTL分析．     

油菜硫甙性状QTL 区间的加密和整合

目的:加密油菜控制硫甙性状QTL区间,并进行QTL整合预测候选基因。方法:利用生物信息学方法根据已知测序的白菜BAC序列信息设计引物,在油菜TN DH群体中进行多态性扩增和定位,并根据加密后构建的遗传连锁图重新检测QTL,进行QTL整合。结果:将根据白菜BAC设计的3对多态性标记成功定位到油菜控制硫甙性状QTL区间,进行QTL整合后将QTL置信区间进一步缩小,并判定了初步的候选基因。结论:充分利用白菜已测序的BAC或者基因组信息,将能加快油菜基础研究的步伐。     

利用选择性基因分型方法定位大豆分枝数QTL

分枝数是大豆重要的农艺性状之一。对控制大豆分枝数的基因位点进行定位具有重要的理论和应用价值。本研究以寡分枝栽培大豆冀黄13为母本,多分枝地方品种小黑豆为父本配制杂交组合,分别在2012年以F2:3群体为定位群体利用寡分枝单尾法和在2014以F2:4群体为定位群体,利用双尾法选择性基因分型方法对大豆分枝数进行QTL定位研究。研究表明,2012年,在寡分枝单尾群体检测到一个L连锁群上BARC19-1222(71.32 c M)位点与分枝数QTL位点连锁,该位点与已经报道的q Br2和q BN24-1位点较近,可能为同一个位点;2014年,在F2:4分离群体中的双尾群体中共检测到2个与分枝数QTL位点连锁的位点,分别是F连锁群上的BARC13-1845位点和B2连锁群上的BARC14-1214位点。在其附近尚未有分枝数相关QTL位点的报道,这两个位点可能为新位点。本研究将为进一步进行分枝数QTL位点的精细定位和分子标记辅助选择育种奠定基础。     

数量性状基因座位及其在家禽中的定位

近年来随着现代分子生物学的发展 ,一些高效的分子遗传标记将各种畜禽的遗传图谱研究推向深入。为高密度、覆盖面广的连锁图谱的构建及QTL的定位奠定了基础。有关QTL的基本理论、QTL定位的步骤、QTL的检测方法以及家禽中定位的QTL已经展开了深入的研究 ,但目前QTL定位中存在诸多问题的问题     

QTL形态标记定位的一种数学方法

根据家蚕中位于Z染色体上的伴性遗传的双形态标记和假定与其有连锁关系的一个具有一对主基因差异的数量性状在测交世代中,所作的理论分布,本文建立了QTL形态标记定位的数学方法,即频数分布面积法,并给出了相应的检测一对主基因在测交世代中的同分离比例及其与形态标记是否有连锁关系的X2统计量．这种定位方法亦适应于非伴性遗传方式的QTL形态标记定位．与单标记定位的极大似然方法相比,我们的方法所作的双标记定位能显示QTL与形态标记发生重组的交叉干步作用,并且定位结果不受作用于数量性状的环境效应所影响．     

豌豆遗传图谱构建及QTL定位研究进展

豌豆的许多性状是多基因控制的数量性状,QTL定位就是以分子标记技术为工具、以遗传连锁图谱为基础、利用分子标记与QTL之间的连锁关系确定控制数量性状的基因在基因组中的位置.本文对QTL定位原理、方法进行了简单介绍;对豌豆遗传图谱构建及主要性状,如产量、品质、抗病性等QTL定位、遗传效应分析等方面的研究进行综述;对目前基于QTL豌豆分子标记育种存在的问题、应用前景进行了探讨.     

水稻QTL分析的研究进展

水稻许多重要的性状是由多基因控制的数量性状,经典的数量遗传学只能把数量性状作为一个整体进行研究。近年来．高密度分子标记连锁图的构建和有效的生物统计学方法的发展使人们对数量性状遗传基础的研究出现了革命性的变化。通过对不同群体内的个体或品系的分子标记基因型和表型数据的共分离分析,能对QTL进行检测和定位。本文对QTL定位的原理和方法进行了介绍,从QTL的数目和效应、上位性效应、QTL基因型与环境的互作、相关性状的QTL以及个体发育不同阶段的QTL等方面对水稻QTL分析的研究进展进行了综述。水稻基因组测序计划已经完成,本文还对基因组时代水稻QTL精细定位和克隆的方法进行了探讨,对QTL分析在水稻育种中的应用前景进行了展望。     

染色体片段导入系在作物遗传育种研究中的应用

染色体片段导入系是在轮回亲本的遗传背景上只含有一个或少量供体染色体片段的家系,可作为QTL分析的重要材料。在QTL检测时,染色体片段导入系的遗传背景清楚,可有效检测微效基因及隐蔽基因,准确地评价供体染色体片段的遗传效应,打破优良基因与不良基因的连锁,提高QTL检测的效率和准确性。另外,染色体片段导入系不仅可用于QTL精细定位和基因克隆、QTL间互作、QTL与环境互作以及杂种优势的研究,同时还可用于作物聚合育种和分子设计育种。本文对染色体片段导入系的构建及其在作物遗传育种中的应用进展进行了综述。     

亚麻主要农艺与品质相关性状的QTL定位

为了全面了解亚麻产量和品质相关性状的遗传基础,为亚麻基因克隆和分子标记辅助育种提供理论依据,在已构建SNP连锁遗传图谱的基础上,以LH-89为父本,R43为母本构建F2:3家系QTL定位群体,用R/QTL软件采用复合区间作图法对13个农艺和品质性状进行QTL定位。结果表明:(1)该研究共检测出35个QTL位点,与粗脂肪及其组成成分相关的QTL有20个,与农艺性状相关的QTL有15个;其中:亚油酸和粗脂肪各5个,亚麻酸、千粒重各4个,棕榈酸、株高、工艺长度各3个,硬脂酸、分枝数各2个,单株果数、果粒数、单株粒重、油酸各1个。(2)共有18个QTL的表型贡献率超10%(主效基因),其中农艺性状定位8个主效基因,品质性状定位10个主效基因。     

BC群体不同连锁模式分子区间标记QTL作图相关方法的精确度分析

该文分析了BC群体不同连锁模式分子区间标记QTL作图相关方法的精确度,提出了相应参数的适用范匿,连锁顺序的检测方法,分析步骤,为QTL作图提供了理论基础。     

A transmission/disequilibrium test approach to screen for quantitative trait loci in two selected lines of large white pigs

Pedigree and marker data from a multiple-generation pig selection experiment have been analysed to screen for loci affecting quantitative traits (QTL). Pigs from a base population were selected either for low backfat thickness at fixed live weight (L-line) or high live weight at fixed age (F-line). Selection was based on single-trait own performance and DNA was available on selected individuals only. Genotypes for three marker loci with known positions on chromosome 4 were available. The transmission/disequilibrium test (TDT) was originally described in human genetics to test for linkage between a genetic marker and a disease-susceptibility locus, in the presence of association. Here, we adapt the TDT to test for linkage between a marker and QTL favoured by selection, and for linkage disequilibrium between them in the base population. The a priori unknown distribution of the test statistic under the null hypothesis, no linkage, was obtained via Monte Carlo simulation. Significant TDT statistics were found for markers AFABP and SW818 in the F-line, indicating the presence of a closely linked QTL affecting growth performance. In the L-line, none of the markers studied showed significance. This study emphasizes the potential of the TDT as a quick and simple approach to screen for QTL in situations where marker genotypes are available on selected individuals. The results suggest that previously identified QTL in crosses of genetically diverse breeds may also segregate in commercial selection lines.     

Linkage disequilibrium fine mapping of quantitative trait loci: A simulation study

Recently, the use of linkage disequilibrium (LD) to locate genes which affect quantitative traits (QTL) has received an increasing interest, but the plausibility of fine mapping using linkage disequilibrium techniques for QTL has not been well studied. The main objectives of this work were to (1) measure the extent and pattern of LD between a putative QTL and nearby markers in finite populations and (2) investigate the usefulness of LD in fine mapping QTL in simulated populations using a dense map of multiallelic or biallelic marker loci. The test of association between a marker and QTL and the power of the test were calculated based on single-marker regression analysis. The results show the presence of substantial linkage disequilibrium with closely linked marker loci after 100 to 200 generations of random mating. Although the power to test the association with a frequent QTL of large effect was satisfactory, the power was low for the QTL with a small effect and/or low frequency. More powerful, multi-locus methods may be required to map low frequent QTL with small genetic effects, as well as combining both linkage and linkage disequilibrium information. The results also showed that multiallelic markers are more useful than biallelic markers to detect linkage disequilibrium and association at an equal distance.     

Fine mapping of complex trait genes combining pedigree and linkage disequilibrium information: a Bayesian unified framework

We present a Bayesian method that combines linkage and linkage disequilibrium (LDL) information for quantitative trait locus (QTL) mapping. This method uses jointly all marker information (haplotypes) and all available pedigree information; i.e., it is not restricted to any specific experimental design and it is not required that phases are known. Infinitesimal genetic effects or environmental noise ("fixed") effects can equally be fitted. A diallelic QTL is assumed and both additive and dominant effects can be estimated. We have implemented a combined Gibbs/Metropolis-Hastings sampling to obtain the marginal posterior distributions of the parameters of interest. We have also implemented a Bayesian variant of usual disequilibrium measures like D' and r(2) between QTL and markers. We illustrate the method with simulated data in "simple" (two-generation full-sib families) and "complex" (four-generation) pedigrees. We compared the estimates with and without using linkage disequilibrium information. In general, using LDL resulted in estimates of QTL position that were much better than linkage-only estimates when there was complete disequilibrium between the mutant QTL allele and the marker. This advantage, however, decreased when the association was only partial. In all cases, additive and dominant effects were estimated accurately either with or without disequilibrium information.     

Joint linkage and linkage disequilibrium mapping of quantitative trait loci in natural populations

Linkage analysis and allelic association (also referred to as linkage disequilibrium) studies are two major approaches for mapping genes that control simple or complex traits in plants, animals, and humans. But these two approaches have limited utility when used alone, because they use only part of the information that is available for a mapping population. More recently, a new mapping strategy has been designed to integrate the advantages of linkage analysis and linkage disequilibrium analysis for genome mapping in outcrossing populations. The new strategy makes use of a random sample from a panmictic population and the open-pollinated progeny of the sample. In this article, we extend the new strategy to map quantitative trait loci (QTL), using molecular markers within the EM-implemented maximum-likelihood framework. The most significant advantage of this extension is that both linkage and linkage disequilibrium between a marker and QTL can be estimated simultaneously, thus increasing the efficiency and effectiveness of genome mapping for recalcitrant outcrossing species. Simulation studies are performed to test the statistical properties of the MLEs of genetic and genomic parameters including QTL allele frequency, QTL effects, QTL position, and the linkage disequilibrium of the QTL and a marker. The potential utility of our mapping strategy is discussed.     

A test of transmission/disequilibrium for quantitative traits in pedigree data, by multiple regression.

The transmission/disequilibrium (TD) test (TDT), proposed, by Spielman et al., for binary traits is a powerful method for detection of linkage between a marker locus and a disease locus, in the presence of allelic association. As a test for linkage disequilibrium, the TDT makes the assumption that any allelic association present is due to linkage. Allison proposed a series of TD-type tests for quantitative traits and calculated their power, assuming that the marker locus is the disease locus. All these tests assume that the observations are independent, and therefore they are applicable, as a test for linkage, only for nuclear-family data. In this report, we propose a regression-based TD-type test for linkage between a marker locus and a quantitative trait locus, using information on the parent-to-offspring transmission status of the associated allele at the marker locus. This method does not require independence of observations, thus allowing for analysis of pedigree data as well, and allows adjustment for covariates. We investigate the statistical power and validity of the test by simulating markers at various recombination fractions from the disease locus.     

The quantitative trait linkage disequilibrium test: a more powerful alternative to the quantitative transmission disequilibrium test for use in the absence of population stratification

Linkage analysis based on identity-by-descent allele-sharing can be used to identify a chromosomal region harboring a quantitative trait locus (QTL), but lacks the resolution required for gene identification. Consequently, linkage disequilibrium (association) analysis is often employed for fine-mapping. Variance-components based combined linkage and association analysis for quantitative traits in sib pairs, in which association is modeled as a mean effect and linkage is modeled in the covariance structure has been extended to general pedigrees (quantitative transmission disequilibrium test, QTDT). The QTDT approach accommodates data not only from parents and siblings, but also from all available relatives. QTDT is also robust to population stratification. However, when population stratification is absent, it is possible to utilize even more information, namely the additional information contained in the founder genotypes. In this paper, we introduce a simple modification of the allelic transmission scoring method used in the QTDT that results in a more powerful test of linkage disequilibrium, but is only applicable in the absence of population stratification. This test, the quantitative trait linkage disequilibrium (QTLD) test, has been incorporated into a new procedure in the statistical genetics computer package SOLAR. We apply this procedure in a linkage/association analysis of an electrophysiological measurement previously shown to be related to alcoholism. We also demonstrate by simulation the increase in power obtained with the QTLD test, relative to the QTDT, when a true association exists between a marker and a QTL.     

Fine mapping of quantitative trait loci using linkage disequilibria with closely linked marker loci

A multimarker linkage disequilibrium mapping method was developed for the fine mapping of quantitative trait loci (QTL) using a dense marker map. The method compares the expected covariances between haplotype effects given a postulated QTL position to the covariances that are found in the data. The expected covariances between the haplotype effects are proportional to the probability that the QTL position is identical by descent (IBD) given the marker haplotype information, which is calculated using the genedropping method. Simulation results showed that a QTL was correctly positioned within a region of 3, 1.5, or 0.75 cM in 70, 62, and 68%, respectively, of the replicates using markers spaced at intervals of 1, 0.5, and 0.25 cM, respectively. These results were rather insensitive to the number of generations since the QTL occurred and to the effective population size, except that 10 generations yielded rather poor estimates of the QTL position. The position estimates of this multimarker disequilibrium mapping method were more accurate than those from a single marker transmission disequilibrium test. A general approach for identifying QTL is suggested, where several stages of disequilibrium mapping are used with increasingly dense marker spacing.     

Linkage disequilibrium mapping of a<Emphasis Type="Italic"> Verticillium dahliae</Emphasis> resistance quantitative trait locus in tetraploid potato (<Emphasis Type="Italic">Solanum tuberosum</Emphasis>) through a candidate gene approach

We have used the linkage disequilibrium mapping method to test for an association between a candidate gene marker and resistance to Verticillium dahliae in tetraploid potato. A probe derived from the tomato Verticillium resistance gene (Ve1) identified homologous sequences (StVe1) in potato, which in a diploid population map to chromosome 9, in a position analogous to that of the tomato resistance gene. When a molecular marker closely linked (1.5 cM) to the homologues was used as a candidate gene marker on 137 tetraploid potato genotypes (mostly North American cultivars), the association between the marker and resistance was confirmed (P<0.001). The amount of phenotypic variation in resistance explained by the allele of the STM1051 marker was greater than 10% and 25% in two subpopulations that were inferred from coancestry data matrix. Cloning of homologues from the highly resistant potato cv. Reddale indicates that the resistance quantitative trait locus (QTL) comprises at least an eleven-member family, encoding plant-specific leucine-rich repeat proteins highly similar to the tomato Ve genes. The sequence analysis shows that all homologues are uninterrupted open reading frames and thus represent putative functional resistance genes. This is the first time that the linkage disequilibrium method has been used to find an association between a resistance gene and a candidate gene marker in tetraploid potato. We have shown that it is possible to map QTL directly on already available potato cultivars, without developing a new mapping population.Communicated by F. SalaminiAn erratum to this article can be found at     

Fine mapping of a quantitative trait locus for twinning rate using combined linkage and linkage disequilibrium mapping

A novel and robust method for the fine-scale mapping of genes affecting complex traits, which combines linkage and linkage-disequilibrium information, is proposed. Linkage information refers to recombinations within the marker-genotyped generations and linkage disequilibrium to historical recombinations before genotyping started. The identity-by-descent (IBD) probabilities at the quantitative trait locus (QTL) between first generation haplotypes were obtained from the similarity of the marker alleles surrounding the QTL, whereas IBD probabilities at the QTL between later generation haplotypes were obtained by using the markers to trace the inheritance of the QTL. The variance explained by the QTL is estimated by residual maximum likelihood using the correlation structure defined by the IBD probabilities. Unlinked background genes were accounted for by fitting a polygenic variance component. The method was used to fine map a QTL for twinning rate in cattle, previously mapped on chromosome 5 by linkage analysis. The data consisted of large half-sib families, but the method could also handle more complex pedigrees. The likelihood of the putative QTL was very small along most of the chromosome, except for a sharp likelihood peak in the ninth marker bracket, which positioned the QTL within a region <1 cM in the middle part of bovine chromosome 5. The method was expected to be robust against multiple genes affecting the trait, multiple mutations at the QTL, and relatively low marker density.