Construction of High-Density Genetic Linkage Maps and Mapping of Growth-Related Quantitative Trail Loci in the Japanese Flounder (Paralichthys olivaceus)

High-density genetic linkage maps were constructed for the Japanese flounder (Paralichthys olivaceus). A total of 1624 microsatellite markers were polymorphic in the reference family. Linkage analysis using JoinMap 4.0 resulted in the mapping of 1487 markers to 24 linkage groups, a result which was consistent with the 24 chromosomes seen in chromosome spreads. The female map was composed of 1257 markers, covering a total of 1663.8 cM with an average interval 1.35 cM between markers. The male map consisted of 1224 markers, spanning 1726.5 cM, with an average interval of 1.44 cM. The genome length in the Japanese flounder was estimated to be 1730.3 cM for the females and 1798.0 cM for the males, a coverage of 96.2% for the female and 96.0% for the male map. The mean recombination at common intervals throughout the genome revealed a slight difference between sexes, i.e. 1.07 times higher in the male than female. High-density genetic linkage maps are very useful for marker-assisted selection (MAS) programs for economically valuable traits in this species and for further evolutionary studies in flatfish and vertebrate species. Furthermore, four quantiative trait loci (QTL) associated with growth traits were mapped on the genetic map. One QTL was identified for body weight on LG 14 f, which explained 14.85% of the total variation of the body weight. Three QTL were identified for body width on LG14f and LG14m, accounting for 16.75%, 13.62% and 13.65% of the total variation in body width, respectively. The additive effects were evident as negative values. There were four QTL for growth traits clustered on LG14, which should prove to be very useful for improving growth traits using molecular MAS.     

Identification of quantitative trait loci controlling developmental characteristics of Brassica oleracea L

A segregating population of F₁-derived doubled haploid (DH) lines of Brassica oleracea was used to detect and locate QTLs controlling 27 morphological and developmental traits, including leaf, flowering, axillary bud and stem characters. The population resulted from a cross between two very different B. oleracea crop types, an annual cauliflower and a biennial Brussels sprout. A principal component analysis (PCA), based on line means, allowed all the traits to be grouped into distinct categories according to the first five Principal Components. These were: leaf traits (PC1), flowering traits (PC2), axillary bud traits (PC3 and 5) and stem traits (PC4). Between zero and four putative QTL were located per trait, which individually explained between 6% and 43% of the additive genetic variation, using the multiple-marker regression approach to QTL mapping. For lamina width, bare petiole length and stem length two QTL with opposite effects were detected on the same linkage groups. Intra- and inter-specific comparative mapping using RFLP markers identified a QTL on linkage group O8 accounting for variation in vernalisation, which is probably synonymous with a QTL detected on linkage group N19 of Brassica napus. In addition, a QTL for petiole length detected on O3 of this study appeared to be homologous to a QTL detected on another B. oleracea genetic map (Camargo et al. 1995). Received: 28 March 2001 / Accepted: 25 June 2001     

Use of Random Amplified Polymorphic DNA Markers for Mapping the Chickpea Genome

Three interspecific crosses were developed using Cicer arietinum (ICC 4918) as the female parent and wild Cicer species [C. reticulatum - JM 2100, JM 2106 and C. echinospermum - ICCW 44] as the male parent. Cicer arietinum (ICC 4918) × C. reticulatum (JM 2100) cross produced the largest number of F₂ plants and was chosen for linkage mapping using Random Amplified Polymorphic DNA (RAPD) primers. A partial linkage map was constructed based upon the segregation of 36 RAPD markers obtained by amplification using 35 primers. The linkage map consists of two linkage groups with 17 linked markers covering a total of 464.9 cM. Analyses also revealed association of three morphological traits with linked RAPD markers. Out of seven morphological traits tested for association with linked markers in the segregating plants, four Quantitative trait loci (QTL) were detected for the trait leaf length and three QTLs each for the traits leaf width and erect plant habit.     

Quantitative trait locus mapping with background control in genetic populations of clonal F1 and double cross

In this study, we considered five categories of molecular markers in clonal F₁ and double cross populations, based on the number of distinguishable alleles and the number of distinguishable genotypes at the marker locus. Using the completed linkage maps, incomplete and missing markers were imputed as fully informative markers in order to simplify the linkage mapping approaches of quantitative trait genes. Under the condition of fully informative markers, we demonstrated that dominance effect between the female and male parents in clonal F₁ and double cross populations can cause the interactions between markers. We then developed an inclusive linear model that includes marker variables and marker interactions so as to completely control additive effects of the female and male parents, as well as the dominance effect between the female and male parents. The linear model was finally used for background control in inclusive composite interval mapping (ICIM) of quantitative trait locus (QTL). The efficiency of ICIM was demonstrated by extensive simulations and by comparisons with simple interval mapping, multiple‐QTL models and composite interval mapping. Finally, ICIM was applied in one actual double cross population to identify QTL on days to silking in maize.     

Genetic linkage maps of rose constructed with new microsatellite markers and locating QTL controlling flowering traits

New microsatellites markers [simple sequence repeat (SSR)] have been isolated from rose and integrated into an existing amplified fragment-length polymorphism genetic map. This new map was used to identify quantitative trait locus (QTL) controlling date of flowering and number of petals. From a rose bud expressed sequence tag (EST) database of 2,556 unigenes and a rose genomic library, 44 EST-SSRs and 20 genomic-SSR markers were developed, respectively. These new rose SSRs were used to expand genetic maps of the rose interspecific F₁ progeny. In addition, SSRs from other Rosaceae genera were also tested in the mapping progeny. Genetic maps for the two parents of the progeny were constructed using pseudo-testcross mapping strategy. The maps consist of seven linkage groups of 105 markers covering 432 cM for the maternal map and 136 markers covering 438 cM for the paternal map. Homologous relationships among linkage groups between the maternal and paternal maps were established using SSR markers. Loci controlling flowering traits were localised on genetic maps as a major gene and QTL for the number of petals and a QTL for the blooming date. New SSR markers developed in this study will provide tools for the establishment of a consensus linkage map for roses that combine traits and markers in various rose genetic maps.     

Genetic mapping of EST-derived simple sequence repeats (EST-SSRs) to identify QTL for leaf morphological characters in a Quercus robur full-sib family

The availability of genomic resources such as expressed sequence tag-derived simple sequence repeat (EST-SSR) markers in adaptive genes with high transferability across related species allows the construction of genetic maps and the comparison of genome structure and quantitative trait loci (QTL) positions. In the present study, genetic linkage maps were constructed for both parents of a Quercus robur × Q. robur ssp. slavonica full-sib pedigree. A total of 182 markers (61 AFLPs, 23 nuclear SSRs, 98 EST-SSRs) and 172 markers (49 AFLPs, 21 nSSRs, 101 EST-SSRs, 1 isozyme) were mapped on the female and male linkage maps, respectively. The total map length and average marker spacing were 1,038 and 5.7 cM for the female map and 998.5 and 5.8 cM for the male map. A total of 68 nuclear SSRs and EST-SSRs segregating in both parents allowed to define homologous linkage groups (LG) between both parental maps. QTL for leaf morphological traits were mapped on all 12 LG at a chromosome-wide level and on 6 LG at a genome-wide level. The phenotypic effects explained by each single QTL ranged from 4.0 % for leaf area to 15.8 % for the number of intercalary veins. QTL clusters for leaf characters that discriminate between Q. robur and Quercus petraea were mapped reproducibly on three LG, and some putative candidate genes among potentially many others were identified on LG3 and LG5. Genetic linkage maps based on EST-SSRs can be valuable tools for the identification of genes involved in adaptive trait variation and for comparative mapping.     

Detection of quantitative trait loci for juvenile growth, flower bearing and rooting ability based on a linkage map of sugi (Cryptomeria japonica D. Don)

 Quantitative traits, including juvenile growth, flower bearing and rooting ability, of a woody plant species, Cryptomeria japonica D. Don, were analyzed in a three-generation pedigree with 73 F₂ progenies using a linkage map with 85 genetic markers (72 RFLP, 11 RAPD, one isozyme and one morphological loci). A cluster of quantitative trait loci (QTLs) related to juvenile growth and female flower bearing was detected on linkage group 2. Some of the influence of this cluster could be attributed to pleiotropic effects of a dwarf locus located in its vicinity. QTLs related to male and female flower bearing were detected at different locations and showed different effects from each other, suggesting that the genetic systems controlling male and female flowering are different. No large QTL affecting rooting ability was detected in the material analyzed in this study. Received: 15 December 1997 / Accepted: 4 February 1998     

Genetic linkage maps of Populus nigra L. including AFLPs, SSRs, SNPs, and sex trait

Black poplar (Populus nigra L.) is a tree of ecological and economic interest. A better knowledge of P. nigra genome is needed for an effective protection and use of its genetic resources. The main objective of this study is the construction of a highly informative genetic map of P. nigra species including genes of adaptive and economic interest. Two genotypes originated from contrasted natural Italian populations were crossed to generate a F₁ mapping pedigree of 165 individuals. Amplification fragment length polymorphism (AFLP), simple sequence repeat (SSR), and single nucleotide polymorphism (SNP) markers were used to genotype 92 F₁ individuals, and the pseudo-test-cross strategy was applied for linkage analysis. The female parent map included 368 markers (274 AFLPs, 91 SSRs, and 3 SNPs) and spanned 2,104 cM with 20 linkage groups, and the male parent map, including 317 markers (205 AFLPs, 106 SSRs, 5 SNPs, and sex trait), spanned 2,453 cM with 23 main linkage groups. The sex, as morphological trait, was mapped on the linkage group XIX of the male parent map. The generated maps are among the most informative in SSRs when compared to the Populus maps published so far and allow a complete alignment with the 19 haploid chromosomes of Populus sequence genome. These genetic maps provide informative tools for a better understanding of P. nigra genome structure and genetic improvement of this ecologically and economically important European tree species. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

QTL Mapping for Frond Length and Width in Laminaria japonica Aresch (Laminarales, Phaeophyta) Using AFLP and SSR Markers

In Laminaria japonica Aresch breeding practice, two quantitative traits, frond length (FL) and frond width (FW), are the most important phenotypic selection index. In order to increase the breeding efficiency by integrating phenotypic selection and marker-assisted selection, the first set of QTL controlling the two traits were determined in F₂ family using amplified fragment length polymorphism (AFLP) and simple sequence repeat (SSR) markers. Two prominent L. japonicas inbred lines, one with “broad and thin blade” characteristics and another with “long and narrow blade” characteristics, were applied in the hybridization to yield the F₂ mapping population with 92 individuals. A total of 287 AFLP markers and 11 SSR markers were used to construct a L. japonica genetic map. The yielded map was consisted of 28 linkage groups (LG) named LG1 to LG28, spanning 1,811.1 cM with an average interval of 6.7 cM and covering the 82.8% of the estimated genome 2,186.7 cM. While three genome-wide significant QTL were detected on LG1 (two QTL) and LG4 for “FL,” explaining in total 42.36% of the phenotypic variance, two QTL were identified on LG3 and LG5 for the trait “FW,” accounting for the total of 36.39% of the phenotypic variance. The gene action of these QTL was additive and partially dominant. The yielded linkage map and the detected QTL can provide a tool for further genetic analysis of two traits and be potential for maker-assisted selection in L. japonica breeding.     

QTL analyses of drought tolerance and growth for a Salix dasyclados × Salix viminalis hybrid in contrasting water regimes

Quantitative trait loci (QTL) for growth traits and water-use efficiency have been identified in two water regimes (normal and drought-treated) and for a treatment index. A tetraploid hybrid F₂ population originating from a cross between a Salix dasyclados clone (SW901290) and a Salix viminalis clone (Jorunn) was used in the study. The growth response of each individual including both above and below ground dry-matter production (i.e. shoot length, shoot diameter, aboveground and root dry weight, internode length, root dry weight/total dry weight, relative growth rate and leaf nitrogen content) was analysed in a replicated block experiment with two water treatments. A composite interval mapping approach was used to estimate number of QTL, the magnitude of the QTL and their position on genetic linkage maps. QTL specific for each treatment and for the treatment index were found, but QTL common across the treatments and the treatment index were also detected. Each QTL explained from 8% to 29% of the phenotypic variation, depending on trait and treatment. Clusters of QTL for different traits were mapped close to each other at several linkage groups, indicating either a common genetic base or tightly linked QTL. Common QTL identified between treatments and treatment index in the complex trait dry weight can be useful tools in the breeding and selection for drought stress tolerance in Salix.     

QUANTITATIVE GENETIC ANALYSIS OF DIVERGENCE IN MALE SECONDARY SEXUAL TRAITS BETWEEN DROSOPHILA SIMULANS AND DROSOPHILA MAURITIANA

The sibling species Drosophila simulans and D. mauritiana differ significantly in a number of male secondary sexual traits, providing an ideal system for genetic analysis of interspecific morphological divergence. In the experiment reported here, F₁ hybrids from a cross of two inbred lines were backcrossed in both directions and about 200 flies from each backcross were scored for several traits (bristle numbers and cuticle areas), as well as 18 markers distributed throughout the genome. Each trait was analyzed by composite interval mapping to identify quantitative trait loci (QTL) and estimate their effects. For each trait, from one to eight loci were detected, with more divergent traits showing evidence for greater numbers of QTL. Estimates of additive effects varied widely, with a range of 0.4 to 4.1 environmental standard deviation units and an average of 2.2 units. There was substantial evidence for nonadditive effects, since the magnitude of estimates often differed significantly between the two backcrosses. The sign of the estimated effect differed among QTL for bristle traits, but not for cuticle area traits, suggesting that these two types of trait may have undergone different types of selection. Finally, several similarities were found between different traits in the estimated positions of QTL, suggesting that pleiotropy and/or linkage of QTL may have been important in the evolution of these traits.     

Genetic linkage maps of barfin flounder (<Emphasis Type="Italic">Verasper moseri</Emphasis>) and spotted halibut (<Emphasis Type="Italic">Verasper variegatus</Emphasis>) based on AFLP and microsatellite markers

Barfin flounder (Verasper moseri) and spotted halibut (Verasper variegatus) are two economically important marine fish species for aquaculture in China, Korea and Japan. Construction of genetic linkage maps is an interesting issue for molecular marker-assisted selection (MAS) and for better understanding the genome structure. In the present study, we constructed genetic linkage maps for both fish species using AFLP and microsatellite markers based on an interspecific F₁ hybrid family (female V. moseri and male V. variegatus). The female genetic map comprised 98 markers (58 AFLP markers and 40 microsatellite markers), distributing in 27 linkage groups, and spanning 637 cM with an average resolution of 8.9 cM. Whereas the male genetic map consisted of 86 markers (48 AFLP and 38 microsatellite markers) in 24 linkage groups, covering a length of 625 cM with an average marker spacing of 10 cM. The expected genome length was 1,128 cM in female and 1,115 cM in male, and the estimated coverage of genome was 56% for both genetic maps. Moreover, five microsatellite markers were observed to be common to both genetic maps. This is the first time to report the genetic linkage maps of V. moseri and V. variegatus that could serve as the basis for genetic improvement and selective breeding, candidate genes cloning, and genome structure research.     

Mapping quantitative trait loci using molecular marker linkage maps

Summary High-density restriction fragment length polymorphism (RFLP) and allozyme linkage maps have been developed in several plant species. These maps make it technically feasible to map quantitative trait loci (QTL) using methods based on flanking marker genetic models. In this paper, we describe flanking marker models for doubled haploid (DH), recombinant inbred (RI), backcross (BC), F₁ testcross (F₁TC), DH testcross (DHTC), recombinant inbred testcross (RITC), F₂, and F₃ progeny. These models are functions of the means of quantitative trait locus genotypes and recombination frequencies between marker and quantitative trait loci. In addition to the genetic models, we describe maximum likelihood methods for estimating these parameters using linear, nonlinear, and univariate or multivariate normal distribution mixture models. We defined recombination frequency estimators for backcross and F₂ progeny group genetic models using the parameters of linear models. In addition, we found a genetically unbiased estimator of the QTL heterozygote mean using a linear function of marker means. In nonlinear models, recombination frequencies are estimated less efficiently than the means of quantitative trait locus genotypes. Recombination frequency estimation efficiency decreases as the distance between markers decreases, because the number of progeny in recombinant marker classes decreases. Mean estimation efficiency is nearly equal for these methods.     

Integration genetic linkage map construction and several potential QTLs mapping of Chinese shrimp (<Emphasis Type="Italic">Fenneropenaeus chinensis</Emphasis>) based on three types of molecular markers

In this study, totally 54 selected polymorphic SSR loci of Chinese shrimp (Fenneropenaeus chinensis), in addition with the previous linkage map of AFLP and RAPD markers, were used in consolidated linkage maps that composed of SSR, AFLP and RAPD markers of female and male construction, respectively. The female linkage map contained 236 segregating markers, which were linked in 44 linkage groups, and the genome coverage was 63.98%. The male linkage map contained 255 segregating markers, which were linked in 50 linkage groups, covering 63.40% of F. chinensis genome. There were nine economically important traits and phenotype characters of F. chinensis were involved in QTL mapping using multiple-QTL mapping strategy. Five potential QTLs associated with standard length (q-standardl-01), with cephalothorax length (q-cephal-01), with cephaloghorax width (q-cephaw-01), with the first segment length (q-firsel-01) and with anti-WSSV (q-antiWSSV-01) were detected on female LG1 and male LG44 respectively with LOD > 2.5. The QTL q-firsel-01 was at 73.603 cM of female LG1. Q-antiWSSV-01 was at 0 cM of male LG44. The variance explained of these five QTLs was from 19.7–33.5% and additive value was from −15.9175 to 7.3675. The closest markers to these QTL were all SSR, which suggested SSR marker was superior to AFLP and RAPD in the QTL mapping.     

Quantitative trait loci for resistance to herbivores in willow: field experiments with varying soils and climates

As a basis for genetic improvement of willow (Salix spp.) for use in wood biomass production, quantitative trait loci (QTLs) responsible for resistance to herbivores have been identified in a tetraploid hybrid F₂ population originating from a cross between Salix dasyclados (Wimm.) and Salix viminalis (L.) (Salicaceae). Symptoms of herbivory, caused by various insects and game, and, in addition, leaf rust, were assessed in three field locations with varying soils and climates. Eleven damage traits (lost leaf area, leaf discoloration, leaf blisters, leaf‐mite symptoms, leaf‐margin cuts, and various estimates of shoot‐tip damage by a gall midge, game, and lepidopterans) were submitted to QTL analysis. A composite interval mapping approach was used to estimate the number of QTLs, the magnitude of the QTLs, and their position on genetic linkage maps. Most of the identified QTLs were specific for each trait and location, but a few QTLs common across the locations were also detected. Each QTL explained between 8 and 24% of the phenotypic variation, depending on damage trait and field location. Clusters of QTLs for different traits were found at several linkage groups, indicating either a common genetic base or tightly linked QTL. Our results emphasize the need for verification of QTL studies over different environments.     

水稻粒长QTL定位与主效基因的遗传分析

该研究利用短粒普通野生稻矮杆突变体和长粒栽培稻品种KJ01组配杂交组合F_1,构建分离群体F_2;并对该群体粒长进行性状遗传分析,利用平均分布于水稻的12条染色体上的132对多态分子标记对该群体进行QTL定位及主效QTLs遗传分析,为进一步克隆新的主效粒长基因奠定基础,并为水稻粒形育种提供理论依据。结果表明:(1)所构建的水稻杂交组合分离群体F_2的粒长性状为多基因控制的数量性状。(2)对543株F_2分离群体进行QTL连锁分析,构建了控制水稻粒长的连锁遗传图谱,总长为1 713.94 cM,共检测出24个QTLs,只有3个表现为加性遗传效应,其余位点均表现为遗传负效应。(3)检测到的3个主效QTLs分别位于3号染色体的分子标记PSM379～RID24455、RID24455～RM15689和RM571～RM16238之间,且三者对表型的贡献率分别为54.85%、31.02%和7.62%。(4)在标记PSM379～RID24455之间已克隆到的粒长基因为该研究新发现的主效QTL位点。     

QTL analysis of body weight and carcass body length traits in an F2 intercross between Landrace and Korean native pigs

Growth traits, such as body weight and carcass body length, directly affect productivity and economic efficiency in the livestock industry. We performed a genome‐wide linkage analysis to detect the quantitative trait loci (QTL) that affect body weight, growth curve parameters and carcass body length in an F₂ intercross between Landrace and Korean native pigs. Eight phenotypes related to growth were measured in approximately 1000 F₂ progeny. All experimental animals were subjected to genotypic analysis using 173 microsatellite markers located throughout the pig genome. The least squares regression approach was used to conduct the QTL analysis. For body weight traits, we mapped 16 genome‐wide significant QTL on SSC1, 3, 5, 6, 8, 9 and 12 as well as 22 suggestive QTL on SSC2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 16 and 17. On SSC12, we identified a major QTL affecting body weight at 140 days of age that accounted for 4.3% of the phenotypic variance, which was the highest test statistic (F‐ratio = 45.6 under the additive model, nominal P = 2.4 × 10^?11) observed in this study. We also showed that there were significant QTL on SSC2, 5, 7, 8, 9 and 12 affecting carcass body length and growth curve parameters. Interestingly, the QTL on SSC2, 3, 5, 6, 8, 9, 10, 12 and 17 influencing the growth‐related traits showed an obvious trend for co‐localization. In conclusion, the identified QTL may play an important role in investigating the genetic structure underlying the phenotypic variation of growth in pigs.     

Two-trait selection response with marker-based assortative mating

 Marker-based assortative mating (MAM) – the mating of individuals that have similar genotypes at random marker loci – can increase selection response for a single trait by 3–8% over random mating (RM). Genetic gain is usually desired for multiple traits rather than for a single trait. My objectives in this study were to (1) compare MAM, phenotypic assortative mating (PAM), and RM of selected individuals for improving two traits and (2) determine when MAM will be most useful for improving two traits. I simulated 20 generations of selecting 32 out of 200 individuals in an F₂ population. The individuals were selected based on an index (SI) of two traits and were intermated by MAM, PAM, or RM. I studied eight genetic models that differed in three contrasts: (1) weight, number of quantitative trait loci (QTL), and heritability (h ²) for each trait; (2) linkage of QTL for each trait; and (3) trait means of the inbred parents of the F₂. For SI and the two component traits, MAM increased short-term selection response by 5–8% in six out of the eight genetic models. The MAM procedure was least effective in two genetic models, wherein the QTL for one trait were unlinked to the QTL for the other trait and the parents of the F₂ had divergent means for each trait. The loss of QTL heterozygosity was much greater with MAM than with PAM or RM. Consequently, the advantage of MAM over RM dissipated after 5–7 generations. Differences were small between selection responses with PAM and RM. The MAM procedure can enhance short-term selection response for two traits when selection is not stringent, h ² is low, and the means of the parents of the F₂ are equal for each trait. Received: 10 June 1998 / Accepted: 5 August 1998     

Next Generation Mapping of Enological Traits in an F2 Interspecific Grapevine Hybrid Family

In winegrapes (Vitis spp.), fruit quality traits such as berry color, total soluble solids content (SS), malic acid content (MA), and yeast assimilable nitrogen (YAN) affect fermentation or wine quality, and are important traits in selecting new hybrid winegrape cultivars. Given the high genetic diversity and heterozygosity of Vitis species and their tendency to exhibit inbreeding depression, linkage map construction and quantitative trait locus (QTL) mapping has relied on F₁ families with the use of simple sequence repeat (SSR) and other markers. This study presents the construction of a genetic map by single nucleotide polymorphisms identified through genotyping-by-sequencing (GBS) technology in an F₂ mapping family of 424 progeny derived from a cross between the wild species V. riparia Michx. and the interspecific hybrid winegrape cultivar, ‘Seyval’. The resulting map has 1449 markers spanning 2424 cM in genetic length across 19 linkage groups, covering 95% of the genome with an average distance between markers of 1.67 cM. Compared to an SSR map previously developed for this F₂ family, these results represent an improved map covering a greater portion of the genome with higher marker density. The accuracy of the map was validated using the well-studied trait berry color. QTL affecting YAN, MA and SS related traits were detected. A joint MA and SS QTL spans a region with candidate genes involved in the malate metabolism pathway. We present an analytical pipeline for calling intercross GBS markers and a high-density linkage map for a large F₂ family of the highly heterozygous Vitis genus. This study serves as a model for further genetic investigations of the molecular basis of additional unique characters of North American hybrid wine cultivars and to enhance the breeding process by marker-assisted selection. The GBS protocols for identifying intercross markers developed in this study can be adapted for other heterozygous species.     

High‐density linkage map reveals QTL underlying growth traits in AP13×VS16 biparental population of switchgrass

Switchgrass (Panicum virgatum L.), a native warm‐season perennial grass, is being considered as a feedstock for biofuel production in the United States. To expedite its genetic improvement and enhance genetic gain per selection cycle, application of marker‐assisted selection is indispensable. A high‐density linkage map was constructed in a pseudo‐F₁ testcross mapping population of AP13×VS16, consisting of 349 progenies. A total of 8,757 single nucleotide polymorphism (SNP) markers generated through genotype‐by‐sequencing (GBS) were used to construct the linkage map. The total map length spans up to 2,540.2 cM with the marker density of one marker in every 0.25–0.34 cM. Spring green‐up (SG), days to flowering (FL), and the vegetative growth period (VP) data were analyzed and used for quantitative trait loci (QTL) mapping. The population showed significant variations and exhibited transgressive segregation for SG, FL, and VP. QTL analyses were performed using trait mean of each year and location along with BLUP (best linear unbiased prediction) values of the traits. A total of 35, 37, and 34 QTL for SG, FL, and VP, respectively, were identified. Phenotypic variability explained by each QTL ranged from 11.29% to 27.85%. The additive genetic effects of individual QTL ranged from ?1.81 to 2.40, ?6.12 to 7.58, and ?16.01 to 6.38 for SG, FL, and VP, respectively. Comparing major QTL regions in the switchgrass genome, 20 candidate genes were identified which were reported to be involved in growth‐, development‐, and flowering‐related traits in switchgrass.