Diversity of telomere palindromic sequences and replication genes among Streptomyces linear plasmids

Streptomyces sp. linear plasmids and linear chromosomes usually contain conserved terminal palindromic sequences bound by the conserved telomeric proteins Tap and Tp, encoded by the tap and tpg genes, respectively, as well as plasmid loci required for DNA replication in circular mode when the telomeres are deleted. These consist of iterons and an adjacent rep gene. By using PCR, we found that 8 of 17 newly detected linear plasmids in Streptomyces strains lack typical telomeric tap and tpg sequences. Instead, two novel telomeres in plasmids pRL1 and pRL2 from the eight strains and one conserved telomere in pFRL1 from the other strains were identified, while multiple short palindromes were also found in the plasmids. The complete nucleotide sequence of pRL2 revealed a gene encoding a protein containing two domains, resembling Tap of Streptomyces and a helicase of Thiobacillus, and an adjacent gene encoding a protein similar to Tpg of Streptomyces and a portion of the telomere terminal protein pTP of adenoviruses. No typical iterons-rep loci were found in the three plasmids. These results indicate an unexpected diversity of telomere palindromic sequences and replication genes among Streptomyces linear plasmids.     

Characterization of the genetic components of Streptomyces lividans linear plasmid SLP2 for replication in circular and linear modes

The nucleotide sequence of Streptomyces lividans linear plasmid SLP2 consists of 50,410 bp (C. H. Huang, C. Y. Chen, H. H. Tsai, C. Chen, Y. S. Lin, and C. W. Chen, Mol. Microbiol. 47:1563-1576, 2003). Here we report that the basic SLP2 locus for plasmid replication in circular mode resembles that of Streptomyces linear plasmids pSLA2 and SCP1 and comprises iterons(SLP2) and the adjacent rep(SLP2) gene. More efficient replication additionally required the 47-bp sequence between bp 581 and 628 upstream of the iterons. Replacement of either the iterons or the rep gene of SLP2 by the corresponding genes of pSLA2 or SCP1 still allows propagation in Streptomyces, although the transformation frequencies were 3 orders of magnitude lower than the original plasmids, suggesting that these plasmids share similar replication mechanisms. To replicate SLP2 in linear mode, additional SLP2 loci--either mtap(SLP2)/tpg(SLP2) or mtap(SLP2)/ilrA(SLP2)--were required. IlrA(SLP2) protein binds specifically to the iterons(SLP2) in vitro. Interactions were detected between these SLP2-borne replication proteins (Mtap(SLP2), Tpg(SLP2), and IlrA(SLP2)) and the telomeric replication proteins (TpgL, TapL, and TpgL) of the S. lividans chromosome, respectively, but the SLP2 proteins failed to interact. These results suggest that SLP2 recruits chromosomally encoded replication proteins for its telomere replication.     

Characterization of replication and conjugation of Streptomyces circular plasmids pFP1 and pFP11 and their ability to propagate in linear mode with artificially attached telomeres

Many Streptomyces species harbor circular plasmids (8 to 31 kb) as well as linear plasmids (12 to 1,700 kb). We report the characterization of two newly detected circular plasmids, pFP11 (35,139 bp) and pFP1 (39,360 bp). As on linear plasmids, their replication loci comprise repA genes and adjacent iterons, to which RepA proteins bind specifically in vitro. Plasmids containing the minimal iterons plus the repA locus of pFP11 were inherited extremely unstably; par and additional loci were required for stable inheritance. Surprisingly, plasmids containing replication loci from pFP11 or Streptomyces circular plasmid SCP2 but not from pFP1, SLP1, or pIJ101 propagated in a stable linear mode when the telomeres of a linear plasmid were attached. These results indicate bidirectional replication for pFP11 and SCP2. Both pFP11 and pFP1 contain, for plasmid transfer, a major functional traB gene (encoding a DNA translocase typical for Streptomyces plasmids) as well as, surprisingly, a putative traA gene (encoding a DNA nickase, characteristic of single-stranded DNA transfer of gram-negative plasmids), but this did not appear to be functional, at least in isolation.     

Diversity of Telomere Palindromic Sequences and Replication Genes among Streptomyces Linear Plasmids

Streptomyces sp. linear plasmids and linear chromosomes usually contain conserved terminal palindromic sequences bound by the conserved telomeric proteins Tap and Tp, encoded by the tap and tpg genes, respectively, as well as plasmid loci required for DNA replication in circular mode when the telomeres are deleted. These consist of iterons and an adjacent rep gene. By using PCR, we found that 8 of 17 newly detected linear plasmids in Streptomyces strains lack typical telomeric tap and tpg sequences. Instead, two novel telomeres in plasmids pRL1 and pRL2 from the eight strains and one conserved telomere in pFRL1 from the other strains were identified, while multiple short palindromes were also found in the plasmids. The complete nucleotide sequence of pRL2 revealed a gene encoding a protein containing two domains, resembling Tap of Streptomyces and a helicase of Thiobacillus, and an adjacent gene encoding a protein similar to Tpg of Streptomyces and a portion of the telomere terminal protein pTP of adenoviruses. No typical iterons-rep loci were found in the three plasmids. These results indicate an unexpected diversity of telomere palindromic sequences and replication genes among Streptomyces linear plasmids.     

Complementation of Conjugation Functions of Streptomyces lividans Plasmid pIJ101 by the Related Streptomyces Plasmid pSB24.2

A database search revealed extensive sequence similarity between Streptomyces lividans plasmid pIJ101 and Streptomyces plasmid pSB24. 2, which is a deletion derivative of Streptomyces cyanogenus plasmid pSB24.1. The high degree of relatedness between the two plasmids allowed the construction of a genetic map of pSB24.2, consisting of putative transfer and replication loci. Two pSB24.2 loci, namely, the cis-acting locus for transfer (clt) and the transfer-associated korB gene, were shown to be capable of complementing the pIJ101 clt and korB functions, respectively, a result that is consistent with the notion that pIJ101 and the parental plasmid pSB24.1 encode highly similar, if not identical, conjugation systems.     

小葱植物内生链霉菌线型质粒pYY8L的端粒与复制区的克隆和鉴定

从小葱植物中分离到一株编号为36R-2-1B的链霉菌菌株,该菌株含有一个约为280kb的线型质粒pYY8L。【目的】克隆、测序和分析pYY8L新的端粒和复制区。【方法】采用改良的"在凝胶中进行DNA碱处理与酶切"的方法来克隆大的线型质粒pYY8L的端粒,通过构建基因组柯斯文库和次级克隆的方法来缩小和鉴定pYY8L的复制区。【结果】在小葱植物内生链霉菌36R-2-1B中检测到约为280kb的线型质粒pYY8L,克隆了pYY8L的端粒。其末端的152bp包含6个小的回文序列,可以形成复杂的二级结构。利用柯斯文库构建、次级克隆和测序获得了4891bp的pYY8L的复制区。该复制区含有6个基因,其中2个与天蓝色链霉菌线型质粒SCP1的复制基因非常相似,但是邻近的重复序列不同。【结论】采用新的改良的方法克隆和鉴定了pYY8L新的端粒和复制区。本文首次报道了植物内生链霉菌线型质粒的端粒和复制基因。     

Characterization of the IncW cryptic plasmid pXV2 from Xanthomonas campestris pv. vesicatoria

The gram-negative plant pathogen Xanthomonas campestris pv. vesicatoria strain Xv2 harbors an indigenous, cryptic plasmid pXV2 of 14.6 kb. This plasmid can only be maintained in Xanthomonas and is incapable of self-transmission. However, incompatibility testing classified it in IncW, a group containing the smallest number of naturally occurring, broad-host-range, conjugative plasmids. A pXV2 derivative containing only a 5.5-kb PstI fragment is stably maintained. Deletion of a 3.0-kb region from the PstI fragment causes a loss of plasmid stability. Nucleotide sequencing of the 2. 1-kb region essential for autonomous replication revealed a repA gene and a downstream noncoding region containing four iterons, two 17- and two 19-nt direct repeats, and an AT-rich region lying between the two sets of iterons. The sequence of the deduced RepA and the iterons shows homology to the RepA (39% identity) and the iterons, respectively, of the IncW plasmid pSa. Maxicell expression of the repA gene produced a protein of 35 kDa, a size similar to that deduced from the nucleotide sequence. Trans-complementation test confirmed that the repA gene and the iterons are indeed the essential elements for pXV2 replication.     

Functional identification of conjugation and replication regions of the tetracycline resistance plasmid pCW3 from Clostridium perfringens

Clostridium perfringens causes fatal human infections, such as gas gangrene, as well as gastrointestinal diseases in both humans and animals. Detailed molecular analysis of the tetracycline resistance plasmid pCW3 from C. perfringens has shown that it represents the prototype of a unique family of conjugative antibiotic resistance and virulence plasmids. We have identified the pCW3 replication region by deletion and transposon mutagenesis and showed that the essential rep gene encoded a basic protein with no similarity to any known plasmid replication proteins. An 11-gene conjugation locus containing 5 genes that encoded putative proteins with similarity to proteins from the conjugative transposon Tn916 was identified, although the genes' genetic arrangements were different. Functional genetic studies demonstrated that two of the genes in this transfer clostridial plasmid (tcp) locus, tcpF and tcpH, were essential for the conjugative transfer of pCW3, and comparative analysis confirmed that the tcp locus was not confined to pCW3. The conjugation region was present on all known conjugative plasmids from C. perfringens, including an enterotoxin plasmid and other toxin plasmids. These results have significant implications for plasmid evolution, as they provide evidence that a nonreplicating Tn916-like element can evolve to become the conjugation locus of replicating plasmids that carry major virulence genes or antibiotic resistance determinants.     

Identification and molecular genetic analysis of replication functions of the bacteriocinogenic plasmid pIP404 from Clostridium perfringens

The replication functions of the bacteriocinogenic plasmid pIP404, from Clostridium perfringens, were localized to a 2.8-kb EcoRI-EcoRV fragment by cloning into a vector deficient for replication in Bacillus subtilis. This fragment contains two genes, cop and rep, which encode proteins and an 800-bp noncoding segment of complex structure consisting of multiple tandemly repeated sequences. The Cop protein is involved in copy number control, whereas the rep gene product is essential for plasmid replication. By deletion analysis the minimal origin of replication was defined as the rep gene plus most of the repeated sequences. A powerful promoter producing a 150-nucleotide RNA molecule, RNA1, that could act as an anti-sense RNA to the rep gene was detected in the "origin-like" region. In contrast to most other small plasmids of gram-positive bacteria, pIP404, and its derivatives, does not appear to replicate via a single stranded intermediate in either C. perfringens or B. subtilis.     

Isolation of a new broad-host-range IncQ-like plasmid, pTC-F14, from the acidophilic bacterium Acidithiobacillus caldus and analysis of the plasmid replicon

A moderately thermophilic (45 to 50 degrees C), highly acidophilic (pH 1.5 to 2.5), chemolithotrophic Acidithiobacillus caldus strain, f, was isolated from a biooxidation process used to treat nickel ore. Trans-alternating field electrophoresis analysis of total DNA from the A. caldus cells revealed two plasmids of approximately 14 and 45 kb. The 14-kb plasmid, designated pTC-F14, was cloned and shown by replacement of the cloning vector with a kanamycin resistance gene to be capable of autonomous replication in Escherichia coli. Autonomous replication was also demonstrated in Pseudomonas putida and Agrobacterium tumefaciens LBA 4404, which suggested that pTC-F14 is a broad-host-range plasmid. Sequence analysis of the pTC-F14 replicon region revealed five open reading frames and a replicon organization like that of the broad-host-range IncQ plasmids. Three of the open reading frames encoded replication proteins which were most closely related to those of IncQ-like plasmid pTF-FC2 (amino acid sequence identities: RepA, 81%; RepB, 78%; RepC, 74%). However, the two plasmids were fully compatible and pTC-F14 represents a new IncQ-like plasmid replicon. Surprisingly, asymmetrical incompatibility was found with the less closely related IncQ plasmid R300B derivative pKE462 and the IncQ-like plasmid derivative pIE1108. Analysis of the pTC-F14 oriV region revealed five direct repeats consisting of three perfectly conserved 22-bp iterons flanked by iterons of 23 and 21 bp. Plasmid pTC-F14 had a copy number of 12 to 16 copies per chromosome in both E. coli, and A. caldus. The rep gene products of pTC-F14 and pTF-FC2 were unable to functionally complement each other's oriV regions, but replication occurred when the genes for each plasmid's own RepA, RepB, and RepC proteins were provided in trans. Two smaller open reading frames were found between the repB and repA genes of pTC-F14, which encode proteins with high amino acid sequence identity (PasA, 81%; PasB, 72%) to the plasmid addiction system of pTF-FC2. This is the second time a plasmid stability system of this type has been found on an IncQ-like plasmid.     

Replication of staphylococcal multiresistance plasmids

Based on structural and functional properties, three groups of large staphylococcal multiresistance plasmids have been recognized, viz., the pSK1 family, pSK41-like conjugative plasmids, and beta-lactamase-heavy-metal resistance plasmids. Here we describe an analysis of the replication functions of a representative of each of these plasmid groups. The replication initiation genes from the Staphylococcus aureus plasmids pSK1, pSK41, and pI9789::Tn552 were found to be related to each other and to the Staphylococcus xylosus plasmid pSX267 and are also related to rep genes of several plasmids from other gram-positive genera. Nucleotide sequence similarity between pSK1 and pI9789::Tn552 extended beyond their rep genes, encompassing upstream divergently transcribed genes, orf245 and orf256, respectively. Our analyses revealed that genes encoding proteins related to the deduced orf245 product are variously represented, in several types of organization, on plasmids possessing six seemingly evolutionarily distinct types of replication initiation genes and including both theta-mode and rolling-circle replicons. Construction of minireplicons and subsequent functional analysis demonstrated that orf245 is required for the segregational stability of the pSK1 replicon. In contrast, no gene equivalent to orf245 is evident on the conjugative plasmid pSK41, and a minireplicon encoding only the pSK41 rep gene was found to exhibit a segregational stability approaching that of the parent plasmid. Significantly, the results described establish that many of the large multiresistance plasmids that have been identified in clinical staphylococci, which were formerly presumed to be unrelated, actually utilize an evolutionarily related theta-mode replication system.     

Control of P1 plasmid replication by iterons

The incA locus of plasmid P1 controls plasmid copy number by inhibiting the replication origin, oriR . Both loci contain repeat sequences (iterons) that bind the P1 RepA protein. Regulation appears to occur by contact of incA and oriR loci of daughter plasmids mediated by RepA-bound iterons. Synthetic incA iteron arrays were constructed with altered numbers, sequences or spacing of iterons. Using these in in vitro and in vivo assays, we examined two models: (i) that the origin and incA loci form a stable 1:1 complex in which multiple iterons of each locus are paired with those of the other, and (ii) that individual incA iterons act as freely diffusing nucleoprotein units that contact origin iterons in a random and dynamic fashion. The data presented here strongly favour the latter case. The origin, with its five iterons, acts as a target but not as an effector of regulation. We present a model for replication control based on random, dynamic contacts between incA iterons and the origin. This system would display randomness with respect to choice of templates and timing of initiation if multiple replicon copies were present, but would tend to act in a machine-like fashion in concert with the cell cycle if just two copies were present in a dividing cell.     

Replication regions of Sinorhizobium meliloti plasmids

The replication (rep) regions of small plasmids from three Sinorhizobium meliloti strains were cloned by marker rescue. Two unique replication regions were identified, one of which was common to two different strains. Plasmid pBB83 carried a 7.2 kbp rep region from a 42 kbp plasmid, and pBB84 carried a 4.5 kbp rep region from a 36 kbp plasmid. The cloned rep regions were of different compatibility types, and were capable of displacing their parent plasmids from S. meliloti. Neither could function in a PolA- strain of Escherichia coli. The cloned replication regions were less stable in S. meliloti than their parent plasmids. The rep genes for each plasmid were localized to less than 2.5 kbp segments. Sequencing data revealed that the pBB83 Rep protein is uncommon, with partial identity to a protein encoded by a plasmid from S. meliloti GR4 [Mercado-Blanco, J., Olivares, J., 1994. The large nonsymbiotic plasmid pRmeGR4a of Rhizobium meliloti GR4 encodes a protein involved in replication that has homology with the RepC protein of Agrobacterium plasmids. Plasmid 32, 75-79]. However, the cloned DNA fragment also contains a truncated segment of the common repABC genes, suggesting that the parent plasmid contained two sets of replication genes. Other genes and an IS-element within the insert are most closely related to sequences derived from the Rhizobiaceae family, suggesting that the plasmid has a limited host range. In contrast, the pBB84 rep region contained genes similar to those associated with several broad host-range plasmids, and its Rep protein is related to that of a Pseudomonas aeruginosa broad host-range plasmid, pVS1 [Heeb, S., Itoh, Y., Nishijyo, T., Schnider, U., Keel, C., Wade, J., Walsh, U., O'Gara, F., Haas, D., 2000. Small, stable shuttle vectors based on the minimal pVS1 replicon for use in gram-negative, plant-associated bacteria. Mol. Plant-Microbe Interact. 13, 232-237]. The pBB84 rep region also includes a probable origin of replication, consisting of DNA boxes flanking a series of direct repeats and an AT-rich sequence.     

Development of a vector and host system and characterization of replication of plasmid pSQ10 in moderately halophilic Nocardiopsis

The genus of Nocardiopsis is a new source of antibiotics, chemicals, and enzymes. Here we reported the development of a vector and host system in moderately halophilic Nocardiopsis via an oriT-mediated conjugation. By screening about 80 Nocardiopsis strains, 6 of them harbored 8 plasmids (18-80 kb). The complete nucleotide sequence of pSQ10 consisted of 18,219 bp, with 71.9% G + C content, encoding 17 open reading frames, 5 of them resembled those of Streptomyces plasmids. A rep locus (iteron within the gene) was identified for replication in Nocardiopsis sp. YIM 90083, and rep protein bound to its iteron sequence. This system may be useful for gene cloning and expression in Nocardiopsis.     

Genetic relationship among Bacillus licheniformis rolling-circle-replicating plasmids and complete nucleotide sequence of pBL63.1, an atypical replicon

The degree of biodiversity among Bacillus licheniformis plasmids and their relation to other Bacillus subtilis group plasmids has been evaluated. To attain this goal we surveyed the diversity and linkage of replication modules in a collection of 21 naturally occurring plasmids of B. licheniformis strains, isolated from different geographical areas. On the basis of rep gene sequence analysis it was possible to group the B. licheniformis plasmids rep genes in two main cluster. Comparison with known rep genes from Bacillus rolling-circle-replicating (RCR) plasmids revealed the presence in B. licheniformis plasmids of replication genes with a DNA sequence peculiar to B. licheniformis species together with rep genes with a very high sequence similarity to B. subtilis plasmids. Furthermore, the molecular organization of an atypical replicon, pBL63.1, was shown. This plasmid did not display any significant similarity with known Bacillus RCR plasmids. The complete nucleotide sequence evidenced a replication module with an unexpected similarity with Rep proteins from RCR plasmids of bacterial species phylogenetically distantly related to Bacillus. pBL63.1 represents an exception to the low-level diversity hypothesis among Bacillus RC replicons.     

拟诺卡氏菌线型质粒pNPL1的测序和分析

【目的】检测和分析稀有放线菌中新的线型质粒。【方法】从植物内生菌中分离链霉菌之外的放线菌菌株,检测、测序和分析线型质粒。【结果】从中草药植物紫花前胡的叶片中分离到一株内生放线菌25L-1-1c,经过16S rRNA基因序列比对属于拟诺卡氏菌。从该菌株中检测到一个约25 kb的线型质粒pNPL1。克隆和测序了pNPL1新的端粒,含有多个小的回文序列。测序获得全长为24 621 bp的线型质粒pNPL1,预测编码22个基因,其中2个基因与链霉菌质粒的端粒复制基因同源,1个基因与链霉菌质粒主要的接合转移基因相似,其余19个基因为未知功能。携带pNPL1端粒复制基因的质粒不能转化变铅青链霉菌,暗示需要发展拟诺卡氏菌的遗传操作系统。【结论】这是首次在拟诺卡氏菌中发现和描述线型质粒。