Transformation of Salmonella typhimurium with plasmid DNA: differences between rough and smooth strains.

Lipopolysaccharide-defective mutants of Salmonella typhimurium were transformed by plasmid DNA with a Ca2+ treatment method. Only those mutants with an Rc or Rd2 chemotype, due to galE or rfaF mutations, respectively, gave efficiencies greater than 10(5) transformants per microgram of DNA, frequencies 8- to 630-fold higher than with smooth strains or other rough mutants.     

Transfer of plasmid DNA to Brevibacterium lactofermentum by electrotransformation

The Escherichia coli-Brevibacterium lactofermentum shuttle vector pBLA was introduced into intact cells of B. lactofermentum by electrotransformation. Several parameters of this procedure such as voltage and cell concentration were analysed. Optimal conditions gave an efficiency of 10(6) transformants per microgram of DNA. Two recalcitrant strains could be electrotransformed when an ampicillin pretreatment step was used. Electrotransformation experiments using DNAase or different structural forms of plasmid DNA showed that the electrotransformation process is quite different from natural transformation involving competence development. Restriction-modification-proficient B. lactofermentum could be efficiently electrotransformed with pBLA DNA isolated from E. coli. This restriction-modification system therefore seems to be overcome by electrotransformation. Thus electrotransformation may efficiently replace the protoplast bacterial transformation method.     

Plasmid transformation of Ruminococcus albus by means of high-voltage electroporation

To apply recombinant DNA techniques to the genetic manipulation of cellulolytic ruminal bacteria, a plasmid vector transformation system must be available. The objective of this work was to develop a system for plasmid transformation of Ruminococcus albus. Using high voltage electrotransformation, pSC22 and pCK17 plasmid vectors, derived from lactic acid bacteria plasmids and replicating via single-stranded DNA intermediate, were successfully introduced into three freshly isolated R. albus strains and into R. albus type strain ATCC 27210. The optimization of the electrotransformation condition raised the electroporation efficiency up to 3 x 10(5) transformants per microgram of pSC22 plasmid.     

Improvement of transformation and electroduction in avermectin high-producer,<Emphasis Type="Italic">Streptomyces avermitilis</Emphasis>

Factors affecting the PEG-mediated transformation and electrotransformation of Streptomyces avermitilis protoplasts, an industrial avermectin high-producer, were evaluated. The maximum protoplast transformation efficiency under optimum conditions with PEG was 3 x 106 transformants per microg plasmid pIJ702 DNA. The efficiency of electrotransformation with the same plasmid the intact cells grown in medium with 0.5 mmol/L CaCl2, suspended in buffer with 0.5 mol/L sucrose +1 mmol/L MgCl2, and pulsed at an electric field strength of 10 kV/cm, 800 ohms, 25 microF, was of 2 x 10(3) transformants per microg DNA. When the cells were electroporated after mild lysozyme-treatment, the efficiency was up to 10(4) transformants per microg DNA. Electroporation of protoplasts and germlings had a lower efficiency (10(2) transformants per microg DNA). We report that electroporation under optimum conditions can be used for direct transfer of nonconjugative plasmid pIJ699 between two different Streptomyces species, S. avermitilis and S. lividans.     

Ca2+-induced permeabilization of the Escherichia coli outer membrane: comparison of transformation and reconstitution of binding-protein-dependent transport.

Ca2+ treatment renders the outer membrane of Escherichia coli reversibly permeable for macromolecules. We investigated whether Ca2+-induced uptake of exogenous protein into the periplasm occurs by mechanisms similar to Ca2+-induced uptake of DNA into the cytoplasm during transformation. Protein import through the outer membrane was monitored by measuring reconstitution of maltose transport after the addition of shock fluid containing maltose-binding protein. DNA import through the outer and inner membrane was measured by determining the efficiency of transformation with plasmid DNA. Both processes were stimulated by increasing Ca2+ concentrations up to 400 mM. Plasmolysis was essential for a high efficiency; reconstitution and transformation could be stimulated 5- and 40-fold, respectively, by a high concentration of sucrose (400 mM) in cells incubated with a suboptimal Ca2+ concentration (50 mM). The same divalent cations that promote import of DNA (Ca2+, Ba2+, Sr2+, Mg2+, and Ni2+) also induced import of protein. Ca2+ alone was found to be inefficient in promoting reconstitution; successive treatment with phosphate and Ca2+ ions was essential. Transformation also was observed in the absence of phosphate, but could be stimulated by pretreatment with phosphate. The optimal phosphate concentrations were 100 mM and 1 to 10 mM for reconstitution and transformation, respectively. Heat shock, in which the cells are rapidly transferred from 0 to 42 degrees C, affected the two processes differently. Incubation of cells at 0 degrees C in Ca2+ alone allows rapid entry of protein, but not of DNA. Transformation was observed only when exogenous DNA was still present during the heat shock. Shock fluid containing maltose-binding protein inhibited transformation (with 6 microgram of DNA per ml, half-maximal inhibition occurred at around 300 microgram of shock fluid per ml). DNA inhibited reconstitution (with 5 microgram of shock fluid per ml, half-maximal inhibition occurred at around 3 mg of DNA per ml).     

Optimization of technical conditions for the transformation of Pediococcus acidilactici P60 by electroporation

Previously reported techniques for the electrotransfer of foreign DNA into pediococci yield only a small number of transformants/mug DNA, especially when using undomesticated strains. This study reports an improved protocol for the electrotransformation of pediococci, based on trials using Pediococcus acidilactici P60 and the plasmid pRS4C1. The improved protocol yields from 2 to 3 log units more transformants than the previously reported methods, with up to (9.1+/-1.3)x10(4) transformants/mug of foreign DNA under the best conditions identified. The most important modifications proposed are an increase in electric field strength during electroporation (from 12.5 to 20kV/cm) and a reduction in lysozyme concentration during the preparation of electrocompetent cells (from 4000 to 2000U/ml): together, these two modifications greatly improve transformant yield. In addition, increasing cell culture time (from OD(600nm)=0.6 to OD(600nm)=1.0-1.2) and increasing dl-threonine concentration in the growth medium (from 20 to 40mM) also contribute to improved electrotransformation efficiency.     

The rfaS gene, which is involved in production of a rough form of lipopolysaccharide core in Escherichia coli K-12, is not present in the rfa cluster of Salmonella typhimurium LT2.

Partial sequencing of the rfa cluster of Salmonella typhimurium LT2 indicated a region of 336 bp between rfaP and rfaB in the site occupied by the rfaS gene in Escherichia coli K-12. This region does not contain a functional rfaS gene, although DNA analysis suggests that the region may have contained an ancestral gene. This conclusion that S. typhimurium LT2 lacks rfaS is supported by its lipopolysaccharide (LPS) gel phenotype, since LT2 does not make the lipooligosaccharide band characteristic of LPS from smooth strains of E. coli K-12.     

Derepression of F factor function in Salmonella typhimurium

In Salmonella typhimurium LT2 the F factor of Escherichia coli K-12 replicates normally but is repressed; Flac+ cells give no visible lysis on solid media with male-specific phages, low frequency transfer of Flac+ (0.001-0.007 per donor cell), few f2 infective centers (0.002-0.006 per cell), and they propagate male-specific phages to low titers. Thus they display a Fin+ (fertility inhibition) phenotype. This repression, owing to pSLT, a 60 Mdal plasmid normally resident in S. typhimurium, was circumvented by the following materials: (i) Flac+ plasmids from E. coli with mutations in finP or traO; (ii) a S. typhimurium line which had been cured of pSLT; (iii) pKZl, a KmR plasmid in the same Inc group as pSLT, which caused expulsion of pSLT and made Fin- lines; (iv) F-Fin- mutants which originated spontaneously and which are present in most Hfr strains of S. typhimurium. Strains which are derepressed for F function by the above methods give visible lysis on solid media with male-specific phages, ca. 1.0 Lac+ recombinants per donor cell in conjugal transfer, ca. 0.82 f2 infective centers per cell, over 80% of cells with visible F pili, and propagation of male-specific phages to high titer. These data confirm earlier observations that pSLT represses F by the FinOP system. In addition, it shows that there is no other mechanism which represses F function in S. typhimurium. If donor function is derepressed by one of the above methods, and if rough recipient strains are used, F-mediated conjugation in S. typhimurium LT2 is as efficient as in E. coli K-12.     

Efficient electrotransformation system and gene targeting in pyogenic streptococci

Hemolytic streptococci are lacking in natural competence for uptake of DNA, and existing electrotransformation methods are still ineffective for most strains. By optimizing biological and electric parameters of electroporation, we established a simple, efficient, and reproducible transformation method for streptococcal cells. The major factor was an increase in the electric field strength. All tested streptococci (6 group A strains and one group C strain) were successfully transformed, and the maximal efficiency was higher than 1 x 10(7) transformants per mug of plasmid DNA. Targeted inactivation of the chromosomal genes of group A and C streptococci was achieved, using the electrotransformation method. The slo- or sagB- mutants constructed by the gene-targeting showed elevated competence for electrotransformation. Availability of the electrotransfer system for cloning and analysis of streptococcal genes is discussed.     

Construction of a stable shuttle vector for high-frequency transformation in Pseudomonas syringae pv. syringae.

A cryptic 80.3-kilobase plasmid, pOSU900, in Pseudomonas syringae pv. syringae strain J900 could be cured by treatment with mitomycin without affecting the pathogenicity of J900 on the host, Phaseolus vulgaris L. The replication region of pOSU900 was identified, subcloned, and modified for construction of a high-copy cloning vector. This vector could be transformed into Pseudomonas strains with high efficiency (ca. 10(6) transformants per microgram of DNA) and was very stable during growth of the host bacteria in planta.     

Protective immunities induced by porins from mutant strains of Salmonella typhimurium

The protective immunity against Salmonella typhimurium-infection in mice immunized with porins from mutant strains of S. typhimurium was studied. A high level of protection against S. typhimurium infection was achieved in mice immunized with native porins from S. typhimurium LT2 (wild-type strain) but not from S. typhimurium SH6017, SH6260, or SH5551 (mutant strains), which produce 34K, 35K, or 36K porin, respectively. Moreover, when mice were immunized with mixtures of 34K, 35K, and 36K porins (34K + 35K, 35K + 36K, 34K + 36K, or 34K + 35K + 36K porin) or LT2 porin heated at 100 C for 2 min in 2% SDS (heat-denatured LT2 porin), the degree of protective immunities in the mice was very much lower than that in the mice immunized with the native LT2 porin. However, antisera raised against these porins showed no significant differences of the antibody titer against LT2 porin or LT2 whole cells. On the other hand, mice immunized with the native LT2 porin--but not 34K, 35K, 36K, 34K + 35K + 36K, and the heat-denatured LT2 porins--exhibited significant levels of delayed-type hypersensitivity reaction and interleukin-2 production when they were elicited with whole cells of S. typhimurium LT2. These observations suggested that the high level of protection induced by the native LT2 porin immunization was dependent on the induction of cell-mediated immunity.     

Bacteriophage P22 H5 transfection and infection of plasmid Salmonella strains

The results of the Ca2+-dependent transfection of the DNA of bacteriophage P22 H5 to constructed Salmonella typhimurium F'- and R+-strains LT2 WT-R and SA118 demonstrated that in these salmonellae the effectiveness of transfection depended on the specificity of the interrelation of plasmids with host strains. Plasmids RA1, R538-1 and RP1 stimulated the transfection of S. typhimurium strain LT2 WT-R, but suppressed the transfection ability of S. typhimurium strain SA118. At the same time the expression of the function of plasmids R446b and R64-11 did not depend on the host strain, as the former did not affect and the latter suppressed the release of transfectants in both Salmonella strains. The presence of plasmids R124, RA1, R64-11 and R724 in strain SA118, heat-sensitive in respect to the synthesis of cell-wall lipopolysaccharide, not only led to a decrease in the effectiveness of transfection; the effectiveness of the inoculation of bacteriophage P22 H5 was also suppressed 10(4) times in the presence of plasmid R124 and at least 10(10) times in the presence of 3 other plasmids. The development of resistance to S-specific bacteriophage P22 H5 was not linked with disturbances in the adsorption of this bacteriophage. Besides, the addition of CaCl2 into the medium completely removed the limitation of infection with bacteriophage P22 H5, determined by plasmid R124.     

Transformation of Actinomyces spp. by a gram-negative broad-host-range plasmid.

The gram-negative broad-host-range vector pJRD215 was transferred by electroporation into strains of Actinomyces viscosus or Actinomyces naeslundii at efficiencies which ranged from 10(2) to 10(7) transformants per microgram of plasmid DNA. The Actinomyces transformants expressed pJRD215-encoded resistance to kanamycin and streptomycin. Moreover, the transforming plasmid DNA had not undergone any deletions or rearrangements, nor had it integrated into the genomes of these strains.     

Efficient Electrotransformation System and Gene Targeting in Pyogenic Streptococci

Hemolytic streptococci are lacking in natural competence for uptake of DNA, and existing electrotransformation methods are still ineffective for most strains. By optimizing biological and electric parameters of electroporation, we established a simple, efficient, and reproducible transformation method for streptococcal cells. The major factor was an increase in the electric field strength. All tested streptococci (6 group A strains and one group C strain) were successfully transformed, and the maximal efficiency was higher than 1×10⁷ transformants per μg of plasmid DNA. Targeted inactivation of the chromosomal genes of group A and C streptococci was achieved, using the electrotransformation method. The slo ^- or sagB ^- mutants constructed by the gene-targeting showed elevated competence for electrotransformation. Availability of the electrotransfer system for cloning and analysis of streptococcal genes is discussed.     

Factors involved in the electroporation-induced transformation of Clostridium perfringens

The following factors were found to improve the efficiency of transformation of Clostridium perfringens 3624A Rifr Strr: (1) a reduction in cuvette sample volume (DNA and cell suspension) to 0.8 ml, (2) use of a 1 microgram/ml concentration of transforming DNA, (3) use of late-logarithmic phase cells, (4) 3-fold concentration of cell density (3.0 x 10(8) CFU/ml), and (5) a reduction in the pH of the expression and selective plating medium to 6.4. Application of the improved conditions resulted in transformation efficiencies for C. perfringens 3624A Rifr Strr ranging from 7.1 transformants/microgram DNA for plasmic pIP401 to 9.2 x 10(4) transformants per microgram DNA for plasmid pAK201. The greatest transformation efficiency obtained using pAK201 was 9.8 x 10(6) transformants/micrograms DNA for C. perfringens strain 13. Using the improved protocol, pAM beta 1 was transformed at a 42-fold greater level when compared with the values reported earlier [1]. In addition to C. perfringens 3624A Rifr Strr, strains 13, 10543A, 3628C, NTG-4, and 3624A were successfully transformed. Nuclease does not appear to be a factor in the C. perfringens strain-specific electro-transformation protocol.     

Electrotransformation of Xanthomonas campestris by RF DNA of filamentous phage φLf

Conditions were optimized for electrotransformation of Xanthomonas campestris pv. campestris by the replicative form (RF) DNA of filamentous phase phi Lf. Early logarithmic cells were washed exhaustively with deionized water and subjected to a pulse at a field strength of 12.5 kV/cm with a 25 microF capacitor and a 400 omega resistor. An efficiency of 5.1 x 10(7) pfu per microgram RF DNA was obtained. Under the same conditions, the broad host range plasmid pLAFR1 (21.6 kb) transformed X. campestris strains at efficiencies around 10(5) pfu per microgram DNA prepared from XcP20H. The advantages of the protocol used in the present study are that the cells can be washed with water instead of complex buffer, and the DNA used can be prepared by the alkaline method of Birnboim & Doly without purification by ultracentrifugation.     

A 10-min method for preparation of highly electrocompetent Pseudomonas aeruginosa cells: application for DNA fragment transfer between chromosomes and plasmid transformation

A rapid microcentrifuge-based method is described for preparation of Pseudomonas aeruginosa electrocompetent cells with up to 10,000-fold increased transformation efficiencies over existing procedures. This increased efficiency now enables the use of transformation for all applications requiring DNA transfer. These include transfer of chromosomal mutations marked with antibiotic resistance genes between P. aeruginosa strains, which solves the riddle of not having an efficient and reliable transduction procedure for this bacterium. Not surprisingly, the method also allows for very efficient transformation with replicative plasmids, with transformation efficiencies ranging from 10(7) to >10(11) transformants per microgram of DNA. Lastly, with efficiencies of up to >10(3) transformants per microgram of DNA the method replaces in most instances conjugation for the transfer of non-replicative plasmids used in gene replacement, site-specific gene integration and transposon mutagenesis experiments.     

Mechanism for induction of anti-DNA antibodies by bacterial lipopolysaccharides in mice; II. Correlation between anti-DNA induction and polyclonal antibody formation by various polyclonal B lymphocyte activators.

The capacity of various polyclonal B lymphocyte activators (PBA) to induce, in mice, the formation of anti-DNA antibodies was compared with their ability to mediate the release of DNA in circulating blood and to stimulate polyclonal antibody synthesis in vivo. Anti-DNA antibodies or polyclonal antibody synthesis were induced in mice after the injection of at least 10 microgram lipopolysaccaride (LPS) from Salmonella typhimurium, 1 mg dextran sulfate (DS), or 2 mg purified protein derivative of tubercle bacteria RT32 (PPD). Smaller quantities of LPS (0.1 microgram) or DS (500 microgram) were sufficient to cause the release of DNA in circulating blood, whereas PPD was not able to provoke such a release at any concentration used. The association of anti-DNA antibodies with polyclonal antibody synthesis in mice injected with various PBA contrasts with the lack of correlation between the formation of anti-DNA antibodies and the release of measurable amounts of DNA in circulating blood. These results strongly suggest that the induction of anti-DNA antibodies by PBA is a consequence of the polyclonal B lymphocyte activation.     

Interspecies electro-transformation in Corynebacteria

Plasmid DNA was efficiently electro-transformed into intact cells of nine Corynebacteria strains belonging to Brevibacterium lactofermentum, Brevibacterium flavum, Corynebacterium glutamicum and Corynebacterium melassecola. Relationships were explored between transformation efficiency and parameters such as electric field strength and pulse length, DNA concentration, physiological state and concentration of the cells. In optimal conditions, more than 10(7) transformants per microgram of DNA could be obtained. Electro-transformation with plasmid DNA isolated from different sources indicates that DNA modification may play a role in transformation efficiency.     

Transformation of the Gram-positive honey bee pathogen, Paenibacillus larvae, by electroporation

In this study we developed an electrotransformation method for use with the Gram-positive bacterium Paenibacillus larvae-a deadly pathogen of honey bees. Combining multiple Bacillus electrotransformation methods to generate an initial protocol, we then optimized the following parameters for use with P. larvae: cell density of culture at harvest time, contents of the washing/electroporation solution, field strength of the electrical pulse, recovery growth medium, and recovery time period. With the optimized method, we achieved an average transformation efficiency of 1.9x10(5) transformants/mug DNA. The method is substantially different from the only other electrotransformation method for a Paenibacillus species found in the literature. This work should facilitate the study of the several previously discovered natural plasmids of P. larvae, and is a step toward developing a genetic system for this species.