Group-specific small-subunit rRNA hybridization probes to characterize filamentous foaming in activated sludge systems.

Foaming in activated sludge systems is characterized by the formation of a thick, chocolate brown-colored scum that floats on the surface of aeration basins and secondary clarifiers. These viscous foams have been associated with the presence of filamentous mycolic acid-containing actinomycetes. To aid in evaluating the microbial representation in foam, we developed and characterized group-, genus-, and species-specific oligonucleotide probes targeting the small subunit rRNA of the Mycobacterium complex, Gordona spp., and Gordona (Nocardia) amarae, respectively. The use of a universal base analog, 5-nitroindole, in oligonucleotide probe design was evaluated by comparing the characteristics of two different versions of the Mycobacterium complex probe. The temperature of dissociation of each probe was determined. Probe specificity studies with a diverse collection of 67 target and nontarget rRNAs demonstrated the specificity of the probes to the target groups. Whole-cell hybridizations with fluorescein- and rhodamine-labeled probes were performed with pure cultures of various members of the Mycobacterium complex as well as with environmental samples from a full-scale activated sludge plant which experienced foaming. Quantitative membrane hybridizations with activated sludge and anaerobic digester foam showed that 15.0 to 18.3% of the total small-subunit rRNAs could be attributed to members of the Mycobacterium complex, of which a vast majority consisted of Gordona rRNA. Several G. amarae strains made up only a very small percentage of the Gordona strains present. We demonstrated that group-specific rRNA probes are useful tools for the in situ monitoring and identification of filamentous bacteria in activated sludge systems.     

The use of alkaline phosphatase-labelled oligonucleotide probes as culture confirmation reagents for the identification of commercially important bacteria

A range of rRNA-targeted alkaline phosphatase-labelled oligonucleotide probes was tested for use as culture confirmation reagents for the rapid identification of micro-organisms. The probes were specific to clinically important bacteria ( Helicobacter pylori and Mycobacterium tuberculosis ), fish and shellfish pathogens ( Renibacterium salmoninarum and Vibrio vulnificus ), food spoilage bacteria ( Listeria spp. and L. monocytogenes ), for bacteria of biotechnological importance ( Streptomyces spp.) and for bacteria associated with the oil industry (Sulphate-reducing bacteria, SRB). A universal bacterial probe and a eukaryotic probe were included in the study as positive and negative controls, respectively. A total of 93 bacterial strains was screened. With the exception of a large number of cross-reactions of the SRB probe (specificity value of 29·4%) and a single cross-reaction of the R. salmoninarum probe (specificity value of 97·7%), dot blot analysis indicated that each probe hybridized 100% specifically to the organisms tested. A simple culture confirmation method was then developed using these probes to enable the identification of bacterial colonies using a simple hybridization procedure.     

Quantification of Toxic Cyanobacteria in Water by Use of Competitive PCR Followed by Sequence-Specific Labeling of Oligonucleotide Probes

A complete nucleic-acid-based assay which consists of sample preparation, DNA amplification, and chromogenic detection was developed for quantifying potential toxin-producing cyanobacteria of interest to the public. The sample preparation strategy involves the same solid phase for cell concentration and DNA purification. For the detection step, we used a combination of competitive PCR amplification, sequence-specific labeling of oligonucleotide probes, hybridization of the labeled oligonucleotides to immobilized complements and, finally, chromogenic detection. The complete assay was tested with water containing toxin-producing cyanobacteria belonging to the genus Microcystis. A detection limit of 100 cells/ml and a quantitative range of more than 3 orders of magnitude were obtained. This approach can easily be adapted to a wide range of bacterial species and has the potential for simultaneous detection and quantitation of several different target organisms by a single assay.     

Oligo-chip based detection of tick-borne bacteria

We have developed an oligonucleotide-chip based assay for detection of 16S ribosomal PCR products from tick-borne bacteria. This chip contains 14 specific probes, which target variable regions of 16S rDNA of tick-borne bacteria including Borrellia spp., Rickettsia spp., Anaplasma spp., Coxiella burnetii and Francisella tularensis. The specificity of these probes was tested by hybridization of the chip with fluorescently labeled PCR products amplified from the genomic DNA of selected tick-borne bacteria. The assay was also tested for detection of tick-borne bacteria in single ticks.     

Development of 18S rRNA-targeted oligonucleotide probes for specific detection of Hartmannella and Naegleria in Legionella-positive environmental samples

Aquatic protozoa are natural hosts of the human pathogen Legionella pneumophila. The fluorescence labeled 16S rRNA-targeted oligonucleotide probe LEGPNE1 has recently been shown to specifically detect extracellular legionellae as well as intracellular legionellae parasitizing protozoa. In this study we designed oligonucleotide probes which are complementary to distinct regions of the 18S rRNA of the Legionella host organisms of the genera Hartmannella and Naegleria. The specificity of the probes, HART498 and NAEG1088, was tested by in situ hybridization of various laboratory reference strains. In order to evaluate the fluorescent probes for environmental studies three selected Legionella-positive cold water habitats were examined for the presence of these protozoa. Traditional culture methods followed by morphological identification revealed an almost consistent presence of Naegleria spp. in cold water habitats. Other protozoa species including Acanthamoeba spp., Echinamoeba spp., Hartmannella spp., Platyamoeba placida, Saccamoeba spp., Thecamoeba quadrilineata, and Vexillifera spp. were found sporadically. Concomitant analysis of the pH, conductivity and temperature of the water samples revealed no preference of Legionella or the respective protozoa for certain environmental conditions. The specificity of the newly designed 18S rRNA probes demonstrates that they are valuable and rapid tools for the identification of culturable environmental protozoa.     

High resolution microarray assay for rapid taxonomic assessment of Pseudo-nitzschia spp. (Bacillariophyceae) in the field

Deployable methods facilitating rapid microbial identification provide opportunities to respond quickly when pathogenic or toxin-producing organisms threaten water quality. We developed a microarray assay to streamline identification of microorganisms in the field, focusing on the harmful algal bloom diatom Pseudo-nitzschia. The assay employed electrochemical signal detection and a simplified protocol, allowing identification of specific taxa onboard research vessels within 7 h of water collection. Microarrays targeted the internal transcribed spacer (ITS1) region between the 18S and 28S ribosomal RNA genes using 307 oligonucleotide probes. The probes, ranging from broadly specific to unique, represented 118 Pseudo-nitzschia ribotypes from 15 species available at the time of assay development. Hybridization signals from multiple probes for each target strain were integrated using a novel algorithm for data analysis. Designated the ‘integrated sumscore data analysis’ (ISDA), the algorithm used probe specificity metrics for signal integration, with uniqueness corresponding to higher probe weight values. The integrated signals provided a ‘sumscore’ for each ribotype represented on the array, indicating its presence or absence in the sample. The algorithm was ‘trained’ by comparison with data from scanning electron microscopy, and cloning and sequence analysis of Pseudo-nitzschia ITS1 ribotypes from 7 laboratory cultures and a complex environmental sample. The ISDA provided correct identification and target sequences for all tested strains. Through design of custom probes (up to 12,000 on a microarray chip), this approach may be used to identify additional microbial taxa of interest and provides rapid, reliable shipboard assays for basic research or water quality monitoring.     

Fluorescent detection of cyanobacterial DNA using bacterial magnetic particles on a MAG-microarray

Bacterial magnetic particles (BMPs) were used for the identification of cyanobacterial DNA. Genus-specific oligonucleotide probes for the detection of Anabaena spp., Microcystis spp., Nostoc spp., Oscillatoria spp., and Synechococcus spp. were designed from the variable region of the cyanobacterial 16S rDNA of 148 strains. These oligonucleotide probes were immobilized on BMPs via streptavidin-biotin conjugation and employed for magnetic-capture hybridization against digoxigenin-labeled cyanobacterial 16S rDNA. Bacterial magnetic particles were magnetically concentrated, spotted in 100-microm-size microwell on MAG-microarray, and the fluorescent detection was performed. This work details the development of an automated technique for the magnetic isolation, the concentration of hybridized DNA, and the detection of specific target DNA on MAG-microarray. The entire process of hybridization and detection was automatically performed using a magnetic-separation robot and all five cyanobacterial genera were successfully discriminated.     

Real-time genotyping with oligonucleotide probes containing locked nucleic acids

Oligonucleotide probes containing locked nucleic acid (LNA) hybridize to complementary single-stranded target DNA sequences with an increased affinity compared to oligonucleotide DNA probes. As a consequence of the incorporation of LNA residues into the oligonucleotide sequence, the melting temperature of the oligonucleotide increases considerably, thus allowing the successful use of shorter LNA probes as allele-specific tools in genotyping assays. In this article, we report the use of probes containing LNA residues for the development of qualitative fluorescent multiplex assays for the detection of single nucleotide polymorphisms (SNPs) in real-time polymerase chain reaction using the 5'-nuclease detection assay. We developed two applications that show the improved specificity of LNA probes in assays for allelic discrimination. The first application is a four-color 5'-nuclease assay for the detection of SNPs for two of the most common genetic factors involved in thrombotic risk, factor V Leiden and prothrombin G20210A. The second application is a two-color assay for the specific detection of the A-to-T tranversion in codon 6 of the beta-globin gene, responsible for sickle cell anemia. Both real-time genotyping assays were evaluated by comparing the performance of our method to that of a reference method and in both cases, we found a 100% concordance. This approach will be useful for research and molecular diagnostic laboratories in situations in which the specificity provided by oligonucleotide DNA probes is insufficient to discriminate between two DNA sequences that differ by only one nucleotide.     

A straightforward DOPE (double labeling of oligonucleotide probes)-FISH (fluorescence in situ hybridization) method for simultaneous multicolor detection of six microbial populations

Fluorescence in situ hybridization (FISH) with rRNA-targeted oligonucleotide probes is an essential tool for the cultivation-independent identification of microbes within environmental and clinical samples. However, one of the major constraints of conventional FISH is the very limited number of different target organisms that can be detected simultaneously with standard epifluorescence or confocal laser scanning microscopy. Recently, this limitation has been overcome via an elegant approach termed combinatorial labeling and spectral imaging FISH (CLASI-FISH) (23). This technique, however, suffers compared to conventional FISH from an inherent loss in sensitivity and potential probe binding biases caused by the competition of two differentially labeled oligonucleotide probes for the same target site. Here we demonstrate that the application of multicolored, double-labeled oligonucleotide probes enables the simultaneous detection of up to six microbial target populations in a straightforward and robust manner with higher sensitivity and less bias. Thus, this newly developed technique should be an attractive option for all researchers interested in applying conventional FISH methods for the study of microbial communities.     

基因芯片技术检测3种食源性致病微生物方法的建立

建立一种运用多重PCR和基因芯片技术检测和鉴定志贺氏菌、沙门氏菌、大肠杆菌O157的方法, 为3种食源性致病菌的快速检测和鉴定提供了准确、快速、灵敏的方法。分别选取编码志贺氏菌侵袭性质粒抗原H基因(ipaH)、沙门氏菌肠毒素(stn)基因和致泻性大肠杆菌O157志贺样毒素(slt)基因设计引物和探针, 进行三重PCR扩增, 产物与含特异性探针的芯片杂交。对7种细菌共26株菌进行芯片检测, 仅3种菌得到阳性扩增结果, 证明此方法具有很高的特异性。3种致病菌基因组DNA和细菌纯培养物的检测灵敏度约为8 pg。对模拟食品样品进行直接检测, 结果与常规细菌学培养结果一致, 检测限为50 CFU/mL。结果表明：所建立的基因芯片检测方法特异性好, 灵敏度高, 为食源性致病菌的检测提供了理想手段, 有良好的应用前景。     

Detection and identification of mycobacteria by amplification of mycobacterial DNA

A 383bp segment of the gene coding for the 65kD mycobacterial antigens from Mycobacterium tuberculosis, Mycobacterium bovis, Mycobacterium avium, Mycobacterium paratuberculosis, and Mycobacterium fortuitum was amplified using Taq polymerase and synthetic oligonucleotide primers and the amplified DNAs from four of these species were compared by nucleotide sequencing. Although the gene segments from these species showed considerable similarity, oligonucleotide probes which could distinguish M. tuberculosis/M. bovis, M. avium/M. paratuberculosis and M. fortuitum could be identified. Samples containing 10(6) human cells and serial dilutions of a suspension of intact mycobacteria were prepared, DNA was extracted, the segment of the mycobacterial DNA sequence amplified, and the amplified DNA hybridized with oligonucleotide probes. In two independent experiments, this procedure permitted the detection and identification of less than 100 mycobacteria in the original sample. These results suggest that this approach may prove useful in the early diagnosis of mycobacterial infection.     

Development of a simple and low-cost real-time PCR method for the identification of commonly encountered mycobacteria in a high throughput laboratory

Aims:  To facilitate efficient identification of commonly encountered mycobacteria species ( Mycobacterium tuberculosis , Mycobacterium avium , Mycobacterium intracellulare , Mycobacterium fortuitum complex , Mycobacterium chelonae/abscessus , Mycobacterium kansasii , Mycobacterium gordonae ) in high throughput laboratories, a 16s rDNA sequence based real-time PCR assay was developed and evaluated.
Methods and Results:  Oligonucleotide primers and hybridization probes were designed based on sequence differences of the mycobacterial 16S rDNA gene. This assay was evaluated with 1649 suspected non-tuberculosis mycobacterial isolates. Apart from 3 out of 40  M. avium isolates that showed false signal with M. intracellulare specific probe, 100% specificity was obtained for all tested probes. Assay sensitivity varied from 88·9 to 100% depending on species. Average cost for obtaining a definite identification was only USD 1·1 with an average turn around time of less than 3 days.
Conclusions:  A rapid, simple and inexpensive real-time PCR assay was developed for the identification of common encountered mycobacteria in a high throughput laboratory setting.
Significance and Impact of the Study:  With this assay, more than 80% of the clinically isolated nontuberculous mycobacteria could be identified in a highly cost effective manner. This helped to save resources for other laboratory activities especially in high throughput mycobacterial laboratories.     

The use of multiplex PCR reactions to characterize populations of lactic acid bacteria associated with meat spoilage

A rapid, systematic and reliable approach for identifying lactic acid bacteria associated with meat was developed, allowing for detection of Carnobacterium spp., Lactobacillus curvatus, Lact. sakei and Leuconostoc spp. Polymerase chain reaction primers specific for Carnobacterium and Leuconostoc were created from 16S rRNA oligonucleotide probes and used in combination with species-specific primers for the 16S/23S rRNA spacer region of Lact. curvatus and Lact. sakei in multiplex PCR reactions. The method was used successfully to characterize lactic acid bacteria isolated from a vacuum-packaged pork loin stored at 2 degrees C. Seventy isolates were selected for identification and 52 were determined to be Lact. sakei, while the remaining 18 isolates were identified as Leuconostoc spp.     

Detection of indicator pathogens from pharmaceutical finished products and raw materials using multiplex PCR and comparison with conventional microbiological methods

A multiplex PCR assay was devised and compared with standard conventional methods for quality evaluation of pharmaceutical raw materials and finished products with low levels of microbial contamination. Samples which were artificially contaminated with <10 colony forming units of Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, and Salmonella species and possibly contaminated samples were incubated for 16 h with different enrichment media. Primers that deduce 559 bp fragment of the 16S rRNA gene was employed in amplifying E. coli species, similarly invasion protein gene with 275 bp fragment size was used as target for detecting Salmonella spp., in case of S. aureus a 461 bp amplicon from m-RNA nuclease gene, and an 709 bp fragment from oprL gene was used for amplifying P. aeruginosa. The detection limits for artificially contaminants by multiplex PCR was 1 CFU/g, where as in case of conventional method the detection limit was >2 CFU/g. Similarly, when tested with possibly contaminated samples, 35% were detected for E. coli, Salmonella spp., S. aureus and P. aeruginosa species with multiplex PCR, while only 21% were detected with standard conventional microbial methods. Multiplex PCR assay provides sensitive and reliable results and allows for the cost-effective detection of all four bacterial pathogens in single reaction tube.     

Multipathogen oligonucleotide microarray for environmental and biodefense applications

Food-borne pathogens are a major health problem. The large and diverse number of microbial pathogens and their virulence factors has fueled interest in technologies capable of detecting multiple pathogens and multiple virulence factors simultaneously. Some of these pathogens and their toxins have potential use as bioweapons. DNA microarray technology allows the simultaneous analysis of thousands of sequences of DNA in a relatively short time, making it appropriate for biodefense and for public health uses. This paper describes methods for using DNA microarrays to detect and analyze microbial pathogens. The FDA-1 microarray was developed for the simultaneous detection of several food-borne pathogens and their virulence factors including Listeria spp., Campylobacter spp., Staphylococcus aureus enterotoxin genes and Clostridium perfringens toxin genes. Three elements were incorporated to increase confidence in the microarray detection system: redundancy of genes, redundancy of oligonucleotide probes (oligoprobes) for a specific gene, and quality control oligoprobes to monitor array spotting and target DNA hybridization. These elements enhance the reliability of detection and reduce the chance of erroneous results due to the genetic variability of microbes or technical problems with the microarray. The results presented demonstrate the potential of oligonucleotide microarrays for detection of environmental and biodefense relevant microbial pathogens.     

Colorimetric detection of the toxic dinoflagellate Alexandrium minutum using sandwich hybridization in a microtiter plate assay

Rapid and reliable detection of harmful algae in coastal areas and shellfish farms is an important requirement for monitoring programs. Molecular technologies are rapidly improving the detection of phytoplankton and their toxins. Assays are based on the discrimination of genetic differences in the species. A commercially available PCR ELISA Dig Detection Kit in a microtiter plate was adapted for the rapid assessment of specificity of the two probes used in a sandwich hybridization assay. The toxic dinoflagellate Alexandrium minutum was used as the target organism and a capture and signal probe were designed for a species-specific identification of this species. This assay also provided the necessary specificity tests prior to the probes being adapted to an automated biosensor using a sandwich hybridization format. All probes regardless of the detection method must be extensively tested prior to use in the field. Total rRNA was isolated from three different strains of A. minutum and the mean concentration of RNA per cell of was determined to be 0.028 ng ± 0.003. Thus, a standard calibration curve for different RNA concentrations was determined so that cell numbers could be inferred from the assay. The assay and the standard curve were evaluated by using spiked field samples. The results demonstrated that the molecular assay was able to detect A. minutum cells at different cell counts in the presence of a complex background.     

Quantification of ratios of Bacteria and Archaea in methanogenic microbial community by fluorescence in situ hybridization and fluorescence spectrometry

16S rRNA-targeted oligonucleotide probes for Bacteria (Eub338) and Archaea (Arc915) were used for whole-cell, fluorescence in situ hybridization (FISH) to quantify the ratio of these microbial groups in an anaerobic digester. The quantity of specifically bound (hybridized) probe was measured by fluorescence spectrometry and evaluated by analysing the dissociation curve of the hybrids, by the measurement of the binding with a nonsense probe, and by the competitive inhibition of the binding of the labelled probe by the corresponding unlabelled probe. Specific binding of oligonucleotide probes with the biomass of anaerobes was 40–50% of their total binding. The ratio of Arc915 and Eub338 probes hybridized with rRNAs of the cells in anaerobic sludge was 0.50. Measurement of FISH by fluorescence spectrometry appears to be a suitable method for quantification of the microbial community of anaerobes.     

Extensive set of mitochondrial LSU rDNA-based oligonucleotide probes for the detection of common airborne fungi

Fungi exist in every indoor and outdoor environment. Many fungi are toxigenic or pathogens that may cause various public health concerns. Rapid and accurate detection and identification of fungi require specific markers. In this study, partial mitochondrial large subunit rDNA was amplified and sequenced from 32 fungal strains representing 31 species from 14 genera. Based on the sequence variation pattern, 26 oligonucleotide probes were designed for their discrimination. The specificity of the probes was evaluated through homology search against GenBank database and hybridization examination on 38 fungal strains. The 26 probes were verified as highly specific to 20 fungal species. A two-step detection procedure through PCR followed by probe hybridization gave ten-fold increase in detection sensitivity than single-step PCR assay and would be a practical approach for environmental sample screening. The probes developed in this study can be applied in clinical diagnosis and environmental monitoring of fungal agents.     

Development of a strain-specific molecular method for quantitating individual campylobacter strains in mixed populations

The identification of sites resulting in cross-contamination of poultry flocks in the abattoir and determination of the survival and persistence of campylobacters at these sites are essential for the development of intervention strategies aimed at reducing the microbial burden on poultry at retail. A novel molecule-based method, using strain- and genus-specific oligonucleotide probes, was developed to detect and enumerate specific campylobacter strains in mixed populations. Strain-specific oligonucleotide probes were designed for the short variable regions (SVR) of the flaA gene in individual Campylobacter jejuni strains. A 16S rRNA Campylobacter genus-specific probe was also used. Both types of probes were used to investigate populations of campylobacters by colony lift hybridization. The specificity and proof of principle of the method were tested using strains with closely related SVR sequences and mixtures of these strains. Colony lifts of campylobacters were hybridized sequentially with up to two labeled strain-specific probes, followed by the generic 16S rRNA probe. SVR probes were highly specific, differentiating down to 1 nucleotide in the target sequence, and were sufficiently sensitive to detect colonies of a single strain in a mixed population. The 16S rRNA probe detected all Campylobacter spp. tested but not closely related species, such as Arcobacter skirrowi and Helicobacter pullorum. Preliminary field studies demonstrated the application of this technique to target strains isolated from poultry transport crate wash tank water. This method is quantitative, sensitive, and highly specific and allows the identification and enumeration of selected strains among all of the campylobacters in environmental samples.     

Quantification of whole-cell in situ hybridization with oligonucleotide probes by flow cytometry of Escherichia coli cells

The use of fluorescence in situ hybridization (FISH) in conjunction with flow cytometry is a popular method of analysing environmental microbial populations. However, false-positive results can be produced if the specificity of oligonucleotide probe binding is not considered. An aim of this research was to evaluate the specificity of labelled oligonucleotide probe binding in FISH by flow cytometry. An excess of unlabelled probe was used to competitively inhibit the specific binding of labelled probe. Comparisons were made between the mean cell fluorescence and the number of fluorescently stained cells in a pure culture of Escherichia coli ATCC 53323. Specific binding of species-specific probes for the detection of E. coli was in the range 47–70% of total binding. A eukaryote probe and a nonsense probe, used as negative controls, had no specific binding with cells of E. coli. The significance of the results obtained is that the enumeration of specifically probe-bound microbial cells by FISH and flow cytometry must be made by an application of labelled and unlabelled probes to distinguish specifically stained cells. This is also a more practical method for the analysis of environmental samples compared to washing of excess non-specifically bound probe, due to the reduction of cell loss from the analysis.