Potential of a 7-dimethylallyltryptophan synthase as a tool for production of prenylated indole derivatives

Recently, a gene for a 7-dimethylallyltryptophan synthase (7-DMATS) was identified in Aspergillus fumigatus and its enzymatic function was proven biochemically. In this study, the behaviour of 7-DMATS towards aromatic substrates was investigated and compared with that of the 4-dimethylallyltryptophan synthase FgaPT2 from the same fungus. In total, 24 simple indole derivatives were tested as potential substrates for 7-DMATS. With an exception of 7-methyltryptophan, all of the substances were accepted by 7-DMATS and converted to their prenylated derivatives, indicating a more flexible substrate specificity of 7-DMATS in comparison to that of FgaPT2. The relative activities of 7-DMATS towards these substrates were from 4% to 89% of that of L-tryptophan, much higher than that of FgaPT2. Structural elucidation of the isolated enzymatic products by nuclear magnetic resonance and mass spectrometry analysis proved unequivocally the prenylation at position C7 of the indole ring. Overnight incubation with eight substances showed that the conversion ratios were in the range of 55.9% to 99.7%. This study provided an additional example that prenylated indole derivatives can be effectively produced by using the overproduced and purified 7-DMATS.     

Metabolic engineering of plants for polyunsaturated fatty acid production

Very-long-chain polyunsaturated fatty acids (VLCPUFAs) have demonstrated health benefits. Currently, the main sources for these fatty acids are oils from fish and microbes. However, shrinking fish populations and the high cost of microbial oil extraction are making the economic sustainability of these sources questionable. Metabolic engineering of oilseed crops could provide a novel and sustainable source of VLCPUFAs. Recently, genes encoding desaturases and elongases from microbes have been identified and successfully expressed in oilseed plants. However, the levels of VLCPUFAs produced in transgenic plants expressing these genes are still much lower than those found in native microbes. This review assesses the recent progress and future perspectives in the metabolic engineering of PUFAs in plants.     

Metabolic engineering of Pichia pastoris X-33 for lycopene production

As an alternative carotenoid producer, non-carotenogenic Pichia pastoris was chosen for a reddish carotenoid lycopene production because it can grow to high cell density without accumulation of ethanol and utilize various classes of organic materials such as methanol as carbon sources. Two synthetic lycopene-pathway plasmids, pGAPZB-EBI* and pGAPZB-EpBpI*p, were designed and constructed. The pGAPZB-EpBpI*p plasmid encoded three carotenogenic enzymes that were engineered to be targeted into peroxisomes of P. pastoris whereas the pGAPZB-EBI* plasmid encoded non-targeted enzymes. After both plasmids were transformed into P. pastoris, the lycopene-producing clone containing the pGAPZB-EpBpI*p plasmid, referred to as Ω, was selected and used for further optimization study. Of the carbon sources tested, glucose resulted in the highest level of lycopene production in complex and minimal media. Batch fermentation of the Ω clone resulted in the production of 4.6 mg-lycopene/g-DCW, with a concentration of 73.9 mg/l of lycopene in minimal medium. For the first time non-carotenogenic yeast P. pastoris was metabolically engineered by heterologously expressing lycopene-pathway enzymes and the lycopene concentration of 73.9 mg/l was obtained. This serves as a basis for the development of biological process for carotenoids using P. pastoris at a commercial production level.     

Evolution and microsynteny of the apyrase gene family in three legume genomes

Apyrases have been suggested to play important roles in plant nutrition, photomorphogenesis, and nodulation. To help trace the evolution of these genes in the legumes—and possibly, the acquisition of new functions for nodulation—apyrase-containing BACs were sequenced from three legume genomes. Genomic sequences from Medicago truncatula, Glycine max and Lotus japonicus were compared to one another and to corresponding regions in Arabidopsis thaliana. A phylogenetic analysis of apyrase homologs from these regions and sequences from other legume species, as well as other plant families, identified a potentially legume-specific clade that contains a well-characterized soybean ( G. soja) apyrase, Gs52, as well as homologs from Dolichos, Lotus , Medicago and Pisum. Sister clades contain homologs from members of Brassicaceae, Solanaceae, Poaceae and Fabaceae. Comparisons of rates of change at synonymous and nonsynonymous sites in the Gs52 and sister clades show rapid evolution in the potentially legume-specific Gs52 clade. The genomic organization of the apyrase-containing BACs shows evidence of gene duplication, genomic rearrangement, and gene conversion among Gs52 homologs. Taken together, these results suggest a scenario of local apyrase gene duplication in an ancestor of the legumes, followed by functional diversification and increased rates of change in the new genes, and further duplications in the Galegae (which include the genera Medicago and Pisum). The study also provides a detailed comparison of genomic regions between two model genomes which are now being sequenced ( M. truncatula and L. japonicus), and a genome from an economically important legume species ( G. max).Electronic Supplementary Material Supplementary material is available in the online version of this article at Communicated by A. Kondorosi     

Metabolic engineering of a Lactobacillus plantarum double ldh knockout strain for enhanced ethanol production

Lactobacillus plantarum ferments glucose through the Embden–Meyerhof–Parnas pathway: the central metabolite pyruvate is converted into lactate via lactate dehydrogenase (LDH). By substituting LDH with pyruvate decarboxylase (PDC) activity, pyruvate may be redirected toward ethanol production instead of lactic acid fermentation. A PDC gene from the Gram-positive bacterium Sarcina ventriculi (Spdc) was introduced into an LDH-deficient strain, L. plantarum TF103, in which both the ldhL and ldhD genes were inactivated. Four different fusion genes between Spdc and either the S. ventriculi promoter or three Lactococcus lactis promoters in pTRKH2 were introduced into TF103. PDC activity was detected in all four recombinant strains. The engineered strains were examined for production of ethanol and other metabolites in flask fermentations. The recombinant strains grew slightly faster than the parent TF103 and produced 90–130 mM ethanol. Although slightly more ethanol was observed, carbon flow was not significantly improved toward ethanol, suggesting that a further understanding of this organism’s metabolism is necessary.     

Metabolic engineering of Thermoanaerobacterium saccharolyticum for n-butanol production

The thermophilic anaerobe Thermoanaerobacterium saccharolyticum JW/SL-YS485 was investigated as a host for n-butanol production. A systematic approach was taken to demonstrate functionality of heterologous components of the clostridial n-butanol pathway via gene expression and enzymatic activity assays in this organism. Subsequently, integration of the entire pathway in the wild-type strain resulted in n-butanol production of 0.85 g/L from 10 g/L xylose, corresponding to 21% of the theoretical maximum yield. We were unable to integrate the n-butanol pathway in strains lacking the ability to produce acetate, despite the theoretical overall redox neutrality of n-butanol formation. However, integration of the n-butanol pathway in lactate deficient strains resulted in n-butanol production of 1.05 g/L from 10 g/L xylose, corresponding to 26% of the theoretical maximum.     

Split-root study of autoregulation of nodulation in the model legume Lotus japonicus

We used a split-root system to determine the timing for induction of the autoregulation of nodulation (AUT) in Lotus japonicus (Regel) Larsen after inoculation with Mesorhizobium loti. The signal took at least five days for full induction of AUT and inhibition of infection thread formation. Strain ML108 (able to nodulate but unable to fix nitrogen) induced full AUT, but ML101 (unable to nodulate or to fix nitrogen) did not induce autoregulation. These results indicate that Nod factor-producing strains induce AUT, but that the nitrogen fixed by rhizobia and supplied to the plant as ammonia does not elicit the AUT in L. japonicus.     

代谢工程改造大肠杆菌合成丙二酸

丙二酸是一种重要的有机二元羧酸,其应用价值遍及化工、医药、食品等领域。本文以大肠杆菌为底盘细胞,过表达了ppc、aspC、panD、pa0132、yneI和pyc基因,成功构建了丙二酸合成重组菌株大肠杆菌BL21(TPP)。该菌株在摇瓶发酵条件下,丙二酸产量达到0.61 g/L。在5 L发酵罐水平,采用间歇补料的方式丙二酸的积累量达3.32 g/L。本研究应用了融合蛋白技术,将ppc和aspC、pa0132和yneI分别进行融合表达,构建了工程菌BL21(SCR)。在摇瓶发酵水平,该菌株丙二酸的积累量达到了0.83 g/L,较出发菌株BL21(TPP)提高了36%。在5 L发酵罐中,工程菌BL21(SCR)的丙二酸产量最高达5.61 g/L,较出发菌株BL21(TPP)提高了69%。本研究实现了丙二酸在大肠杆菌中的生物合成,为构建丙二酸合成的细胞工厂提供了理论依据和技术基础,同时也对其他二元羧酸的生物合成具有启发和指导意义。     

Genetic engineering of Escherichia coli for production of tetrahydrobiopterin

Tetrahydrobiopterin (BH4) is an essential cofactor for various enzymes in mammals. In vivo, it is synthesized from GTP via the three-step pathway of GTP cyclohydrolase I (GCHI), 6-pyruvoyl-tetrahydropterin synthase (PTPS) and sepiapterin reductase (SPR). BH4 is a medicine used to treat atypical hyperphenylalaninemia. It is currently synthesized by chemical means, which consists of many steps, and requires costly materials and complicated procedures. To explore an alternative microbial method for BH4 production, we utilized recombinant DNA technology to construct recombinant Escherichia coli (E. coli) strains carrying genes expressing GCHI, PTPS and SPR enzymes. These strains successfully produced BH4, which was detected as dihydrobiopterin and biopterin, oxidation products of BH4. In order to increase BH4 productivity we made further improvements. First, to increase the de novo GTP supply, an 8-azaguanine resistant mutant was isolated and an additional guaBA operon was introduced. Second, to augment the activity of GCHI, the folE gene from E. coli was replaced by the mtrA gene from Bacillus subtilis. These modifications provided us with a strain showing significantly higher productivity, up to 4.0 g of biopterin/L of culture broth. The results suggest the possibility of commercial BH4 production by our method.     

Metabolic engineering for the production of dicarboxylic acids and diamines

Microbial production of chemicals and materials from renewable carbon sources is becoming increasingly important to help establish sustainable chemical industry. In this paper, we review current status of metabolic engineering for the bio-based production of linear and saturated dicarboxylic acids and diamines, important platform chemicals used in various industrial applications, especially as monomers for polymer synthesis. Strategies for the bio-based production of various dicarboxylic acids having different carbon numbers including malonic acid (C3), succinic acid (C4), glutaric acid (C5), adipic acid (C6), pimelic acid (C7), suberic acid (C8), azelaic acid (C9), sebacic acid (C10), undecanedioic acid (C11), dodecanedioic acid (C12), brassylic acid (C13), tetradecanedioic acid (C14), and pentadecanedioic acid (C15) are reviewed. Also, strategies for the bio-based production of diamines of different carbon numbers including 1,3-diaminopropane (C3), putrescine (1,4-diaminobutane; C4), cadaverine (1,5-diaminopentane; C5), 1,6-diaminohexane (C6), 1,8-diaminoctane (C8), 1,10-diaminodecane (C10), 1,12-diaminododecane (C12), and 1,14-diaminotetradecane (C14) are revisited. Finally, future challenges are discussed towards more efficient production and commercialization of bio-based dicarboxylic acids and diamines.     

Metabolic engineering of Torulopsis glabrata for malate production

The yeast Torulopsis glabrata CCTCC M202019, which is used for industrial pyruvate production, was chosen to explore the suitability of engineering this multi-vitamin auxotrophic yeast for increased malate production. Various metabolic engineering strategies were used to manipulate carbon flux from pyruvate to malate: (i) overexpression of pyruvate carboxylase and malate dehydrogenase; (ii) identification of the bottleneck in malate production by model iNX804; (iii) simultaneous overexpression of genes RoPYC, RoMDH and SpMAE1. Using these strategies, 8.5 g L^–1 malate was accumulated in the engineered strain T.G-PMS, which was about 10-fold greater than that of the control strain T.G-26. The results presented here suggest that T. glabrata CCTCC M202019 is a promising candidate for industrial malate production.     

代谢工程改造大肠杆菌合成己二酸

己二酸是一种具有重要应用价值的二元羧酸,是合成尼龙-66的关键前体。目前,生物法生产己二酸存在生产周期长、生产效率低的问题。本研究选择一株野生型高产琥珀酸菌株大肠杆菌(Escherichia coli) FMME N-2为底盘细胞,首先通过引入逆己二酸降解途径的关键酶,成功构建了可合成0.34 g/L己二酸的E. coli JL00菌株;接着,对合成路径限速酶进行表达优化,使E. coli JL01菌株在摇瓶发酵条件下产量达到0.87 g/L;随后,通过敲除sucD基因、过表达acs基因和突变lpd基因的组合策略平衡己二酸合成前体的供应,优化菌株E. coli JL12己二酸产量进一步提升至1.51 g/L;最后,在5 L发酵罐上对己二酸发酵工艺进行优化。工程菌株经72 h分批补料发酵,己二酸的产量达到22.3 g/L,转化率为0.25 g/g,生产强度为0.31 g/(L·h),具备了一定的应用潜力。本研究可为包括己二酸在内的多种二元羧酸细胞工厂的构建提供理论依据和技术基础。     

Metabolic engineering of Saccharomyces cerevisiae for production of ginsenosides

Ginsenosides are the primary bioactive components of ginseng, which is a popular medicinal herb and exhibits diverse pharmacological activities. Protopanaxadiol is the aglycon of several dammarane-type ginsenosides, which also has anticancer activity. For microbial production of protopanaxadiol, dammarenediol-II synthase and protopanaxadiol synthase genes of Panax ginseng, together with a NADPH-cytochrome P450 reductase gene of Arabidopsis thaliana, were introduced into Saccharomyces cerevisiae, resulting in production of 0.05 mg/g DCW protopanaxadiol. Increasing squalene and 2,3-oxidosqualene supplies through overexpressing truncated 3-hydroxyl-3-methylglutaryl-CoA reductase, farnesyl diphosphate synthase, squalene synthase and 2,3-oxidosqualene synthase genes, together with increasing protopanaxadiol synthase activity through codon optimization, led to 262-fold increase of protopanaxadiol production. Finally, using two-phase extractive fermentation resulted in production of 8.40 mg/g DCW protopanaxadiol (1189 mg/L), together with 10.94 mg/g DCW dammarenediol-II (1548 mg/L). The yeast strains engineered in this work can serve as the basis for creating an alternative way for production of ginsenosides in place of extraction from plant sources.     

Metabolic engineering of strains of Ralstonia eutropha and Pseudomonas putida for biotechnological production of 2-methylcitric acid

In this study strains of Ralstonia eutropha H16 and Pseudomonas putida KT2440 were engineered which are suitable for biotechnological production of 2-methylcitric acid (2MC). Analysis of a previous mutant of R. eutropha able to accumulate 2MC recommended this strain as a candidate for fermentative production of 2MC. This knowledge was used for construction of strains of R. eutropha H16 and P. putida KT2440 capable of enhanced production of 2MC. In both bacteria the chromosomal genes encoding the 2-methyl-cis-aconitate hydratase (acnM) were disrupted by directed insertion of a copy of an additional 2-methylcitrate synthase gene (prpC) yielding strains R. eutropha DeltaacnM(Re)OmegaKmprpC(Pp) and P. putida DeltaacnM(Pp)OmegaKmprpC(Re). In both strains 2-methylcitrate synthase was expressed under control of the constitutive kanamycin-resistance gene (OmegaKm) resulting in up to 20-fold higher specific 2-methylcitrate synthase activities in comparison to the wild type. The disruption of the acnM gene by insertion of prpC led to a propionate- and levulinate-negative phenotype of the engineered strains, and analysis of supernatant of these strains revealed overproduction and accumulation of 2MC in the medium. A two stage cultivation regime comprising an exponential growth phase and a 2MC production phase was developed and applied to both engineered strains for optimum production of 2MC. Whereas gluconate, fructose or succinate were provided as carbon source for the exponential growth phase, a combination of propionate or levulinate as precursor substrate for provision of propionyl-CoA and succinate or fumarate as precursor substrate for provision of oxaloacetate were used in the production phase to make sure that the 2-methylcitrate synthase was provided with their substrates. Employing the optimised feeding regime P. putida DeltaacnM(Pp)OmegaKmprpC(Re) and R. eutropha DeltaacnM(Re)OmegaKmprpC(Pp) produced 2MC up to maximal concentrations of 7.2 g/L or 26.5 mM and 19.2 g/L or 70.5 mM, respectively, during 144 h of cultivation.     

Use of ri-mediated transformation for production of transgenic plants

Summary Agrobacterium rhizogenes-mediated transformation has been used to obtain transgenic plants in 89 different taxa, representing 79 species from 55 genera and 27 families. A diverse range of dicotyledonous plant families is represented, including one Gymnosperm family. In addition to the Ri plasmid, over half these plants have been transformed with foreign genes, including agronomically useful traits. Plants regenerated from hairy roots often show altered plant morphology such as dwarfing, increased rooting, altered flowering, wrinkled leaves and/or increased branching due to rol gene expression. These altered phenotypic features can have potential applications for plant improvement especially in the horticultural industry where such morphological alterations may be desirable. Use of A. rhizogenes and rol gene transformation has tremendous potential for genetic manipulation of plants and has been of particular benefit for improvement of ornamental and woody plants.     

代谢改造熊蜂生假丝酵母提高酸型槐糖脂产量

【目的】槐糖脂是一类生物表面活性剂,不仅具有常规表面活性剂所具有的增溶、乳化、润湿、发泡、分散、降低表面张力等通用性能,且对环境的耐受性极强。熊蜂生假丝酵母(Starmerella bombicola)能够发酵生产槐糖脂,但槐糖脂具有酸型、内酯型和乙酰化型等不同类型,结构多样,难以分离。本文拟通过代谢工程改造,构建高产酸型槐糖脂的熊蜂生假丝酵母工程菌株。【方法】利用潮霉素抗性基因构建了标记基因重复利用系统Rec-six基因编辑系统,在此基础上将合成内酯型槐糖脂的关键基因——内酯酶基因SBLE敲除获得一株只产酸型槐糖脂的工程菌株Δsble,进一步同源过量表达葡萄糖基转移酶基因UGTB并敲除过氧化物酶体膜转运蛋白编码基因PXA1,构建了高产酸型槐糖脂的酵母工程菌。【结果】与出发菌株相比,重组熊蜂生假丝酵母发酵油酸能够合成单一的酸型槐糖脂,而不再合成内酯型槐糖脂,同时酸型槐糖脂的产量由20 g/L提高到44 g/L,提高了2.1倍。【结论】通过敲除PXA1、SBLE和过表达UGTB来改造熊蜂生假丝酵母,能够有效提高重组菌的酸型槐糖脂产量,为发酵法生产酸型槐糖脂奠定了基础。     

The maize transposable element Ac is mobile in the legume Lotus japonicus

To evaluate the prospects for transposon mutagenesis in the autogamous diploid legume Lotus japonicus, the behaviour of the maize transposable element Ac was analysed in the progeny of 38 independent transgenic plants. The conditions for monitoring donor site excision using histochemical localization of -glucuronidase activity or the alternative spectinomycin resistance assay were established, and used to follow Ac mobility through two generations. Somatic excision was monitored as variegated cotyledons in the T₂ generation and germinal excision events were scored in segregating T₃ families as complete -glucuronidase-mediated staining of cotyledons or as a fully green spectinomycin-resistant phenotype. Using these assays an average germinal excision frequency of 12% was estimated in the T₃ offspring from variegated plants. The fidelity of the excision assays was ascertained by comparing the frequency of germinal excision to the frequency of Ac reinsertion at new positions of the genome. Transposition of Ac in 42% of the plants and detection of the characteristic Ac insertion/excision footprints suggests that insertion mutagenesis with the autonomous maize Activator element is feasible in Lotus japonicus. Parameters influencing Ac behaviour, such as dosage, position effects and modification of the element itself, were also investigated comparing homozygous and hemizygous plants from the same family and by analysing different transformants.Abbreviations W white - V variegated - FG fully green - FB fully blue - aadA spectinomycin adenyltransferase     

Metabolic engineering for the production of plant isoquinoline alkaloids

Several plant isoquinoline alkaloids (PIAs) possess powerful pharmaceutical and biotechnological properties. Thus, PIA metabolism and its fascinating molecules, including morphine, colchicine and galanthamine, have attracted the attention of both the industry and researchers involved in plant science, biochemistry, chemical bioengineering and medicine. Currently, access and availability of high‐value PIAs [commercialized (e.g. galanthamine) or not (e.g. narciclasine)] is limited by low concentration in nature, lack of cultivation or geographic access, seasonal production and risk of overharvesting wild plant species. Nevertheless, most commercial PIAs are still extracted from plant sources. Efforts to improve the production of PIA have largely been impaired by the lack of knowledge on PIA metabolism. With the development and integration of next‐generation sequencing technologies, high‐throughput proteomics and metabolomics analyses and bioinformatics, systems biology was used to unravel metabolic pathways allowing the use of metabolic engineering and synthetic biology approaches to increase production of valuable PIAs. Metabolic engineering provides opportunity to overcome issues related to restricted availability, diversification and productivity of plant alkaloids. Engineered plant, plant cells and microbial cell cultures can act as biofactories by offering their metabolic machinery for the purpose of optimizing the conditions and increasing the productivity of a specific alkaloid. In this article, is presented an update on the production of PIA in engineered plant, plant cell cultures and heterologous micro‐organisms.     

Implications of transgenic, insecticidal plants for insect and plant biodiversity

Genetically modified plants are widely grown predominantly in North America and to a lesser extent in Australia, Argentina and China but their regions of production are expected to spread soon beyond these limited areas also reaching Europe where great controversy over the application of gene technology in agriculture persists. Currently, several cultivars of eight major crop plants are commercially available including canola, corn, cotton, potato, soybean, sugar beet, tobacco and tomato, but many more plants with new and combined multiple traits are close to registration. While currently agronomic traits (herbicide resistance, insect resistance) dominate, traits conferring “quality” traits (altered oil compositions, protein and starch contents) will begin to dominate within the next years. However, economically the most promising future lies in the development and marketing of crop plants expressing pharmaceutical or “nutraceuticals” (functional foods), and plants that express a number of different genes. From this it is clear that future agricultural and, ultimately, also natural ecosystems will be challenged by the large-scale introduction of entirely novel genes and gene products in new combinations at high frequencies all of which will have unknown impacts on their associated complex of non-target organisms, i.e. all organisms that are not targeted by the insecticidal protein. In times of severe global decline of biodiversity, pro-active precaution is necessary and careful consideration of the likely expected effects of transgenic plants on biodiversity of plants and insects is mandatory.In this paper possible implications of non-target effects for insect and plant biodiversity are discussed and a case example of such non-target effects is presented. In a multiple year research project, tritrophic and bitrophic effects of transgenic corn, expressing the gene from Bacillus thuringiensis (Bt-corn) that codes for the high expression of an insecticidal toxin (Cry1Ab), on the natural enemy species, Chrysoperla carnea (the green lacewing), was investigated. In these laboratory trials, we found prey-mediated effects of transgenic Bt-corn causing significantly higher mortality of C. carnea larvae. In further laboratory trials, we confirmed that the route of exposure (fed directly or via a herbivorous prey) and the origin of the Bt (from transgenic plants or incorporated into artificial diet) strongly influenced the degree of mortality. In choice feeding trials where C. carnea could choose between Spodoptera littoralis fed transgenic Bt-corn and S. littoralis fed non-transgenic corn, larger instars showed a significant preference for S. littoralis fed non-transgenic corn while this was not the case when the choice was between Bt- and isogenic corn fed aphids. Field implications of these findings could be multifold but will be difficult to assess because they interfere in very intricate ways with complex ecosystem processes that we still know only very little about. The future challenge in pest management will be to explore how transgenic plants can be incorporated as safe and effective components of IPM systems and what gene technology can contribute to the needs of a modern sustainable agriculture that avoids or reduces adverse impacts on biodiversity? For mainly economically motivated resistance management purposes, constitutive high expression of Bt-toxins in transgenic plants is promoted seeking to kill almost 100% of all susceptible (and if possible heterozygote resistant) target pest insects. However, for pest management this is usually not necessary. Control at or below an established economic injury level is sufficient for most pests and cropping systems. It is proposed that partially or moderately resistant plants expressing quantitative rather than single gene traits and affecting the target pest sub-lethally may provide a more meaningful contribution of agricultural biotechnology to modern sustainable agriculture. Some examples of such plants produced through conventional breeding are presented. Non-target effects may be less severe allowing for better incorporation of these plants into IPM or biological control programs using multiple control strategies, thereby, also reducing selection pressure for pest resistance development.