Immobilization of lipase on a new inorganic ceramics support, toyonite, and the reactivity and enantioselectivity of the immobilized lipase

A porous ceramics support, Toyonite 200-M (TN-M), for the immobilization of lipases was prepared hydrothermally from the minerals of kaolinite. Compared with some other commercial solid supports, the TN-M one exhibited better stability and higher selectivity for lipase proteins, and lipase PS (Pseudomonas cepacia) immobilized on the ceramics support showed higher reactivity for organic substrates than the free crude enzyme.     

An efficient system for catalyzing ester synthesis using a lipase from a newly isolated Burkholderia cepacia strain

The synthesis of ethyl-oleate by the lipase from the newly isolated strain Burkholderia cepacia LTEB11 in three different systems has been studied - immobilization on a hydrophobic support (Accurel EP 100®), encapsulation in reverse micelles, and direct addition of powdered free enzyme to the reaction medium. The immobilized enzyme performed best, giving a 70% ester yield in 10 h, this yield being five-fold greater than that obtained for reversed micelles, and two and a half times greater than that obtained for direct addition. An increase in the amount of immobilized enzyme preparation added gave a 100% ester yield in 3 h. The immobilized preparation was quite stable, giving a 100% yield of ethyl-oleate during 11 repeated reactions, and 50% yield after 24 reactions. These results suggest that the lipase of our strain of B. cepacia LTEB11 immobilized on Accurel has good potential for application in biocatalysis in organic media.     

Lipase-Catalyzed Resolution of Isopropylidene Glycerol: Effect of Co-Solvents on Enantioselectivity

The resolution of 1,2-O-isopropylidene glycerol via enzyme catalyzed hydrolysis of the corresponding benzoic ester was investigated. Using lipase PS from Pseudomonas cepacia, we determined the influence of organic co-solvents on the activity and enantioselectivity of the enzyme. The performance of the lipase was correlated to the nature (logP, ε,μ and the percentage of the organic media. The highest enzymatic activity was found in solvents completely miscible or completely immiscible in water. The enzyme stereoselectivity was inversely related to the logP of the solvent.     

Influence of precursors and additives on microbial lipases stabilized by sol-gel entrapment

Sol-gel entrapment of microbial lipases from Candida cylindracea (Cc lipase), Pseudomonas fluorescens (Lipase AK), and Pseudomonas cepacia (Lipase PS), using as precursors tetraethoxysilane (TEOS) and silanes of type R-Si(OEt)₃ with alkyl or aryl R groups, has been investigated. Three different methods using these precursors were tried exhibiting protein immobilization yields in the range of 20-50%. Hydrolysis of emulsified olive oil, esterification of lauric acid with 1-octanol and enantioselective acylation of 2-pentanol have been used as model reactions for testing the properties of the encapsulated lipases. The recovery yields of the enzyme activity in the esterification reaction were between 20-68%, the best performance being achieved with phenyltriethoxysilane and tetraethoxysilane precursors at 3:1 molar ratio. When testing the entrapped Lipase AK in the enantioselective acylation reaction of 2-pentanol, activity recovery yields up to 32% related to the free enzyme were obtained and the immobilization increased the enantioselectivity of the enzyme.     

Cloning, expression and characterization of a novel thermal stable and short-chain alcohol tolerant lipase from Burkholderia cepacia strain G63

A lipase gene lipA and its chaperone gene lipB were cloned from Burkholderia cepacia strain G63. The lipA was composed of 1092 bp, encoding 363 amino acid residues, and the lipB composed of 1035 bp, corresponding to 344 amino acid residues. The significant amino acid similarity with Pseudomonas cepacia lipase revealed that this enzyme could be classified into the lipolytic subfamily I.2. The lipA and lipB genes were cloned into pBBR1Tp vector and conjugated into B. cepacia strains G63 with the help of pRK2013. The recombinant strain was fermented in 10 l bioreactor and the lipase was purified by a combination of ammonium sulfate fractionation, DEAE ion-exchange chromatography and gel filtration. The purified lipase kept stable at a temperature range of 40–70 °C. After incubated at 70 °C, the optimal temperature of this enzyme, for 10 h it remained 86.1% of its activity. The enzyme was also highly tolerant to a series of organic solution. Incubated in 50% methanol solution up to 48 h, the enzyme still kept 98.3% of its activity. The transesterification activity of soybean oil to fatty acid methyl esters (FAMEs) reached 87.8% after 72 h, indicating that it is a potential biocatalyzer for biodiesel production.     

Spectrophotometric Assay of Lipase Activity: A New 4-nitrophenyl Ester of a Dialkylglycerol Suitable as a Chromogenic Substrate of Pseudomonas cepacia Lipase

Evaluation of Pseudomonas cepacia lipase (PCL) activity by a titrimetric method with triacylglycerols (TAG) and synthetic dialkylglycerol esters (DAGE) established the chain length selectivity of the enzyme and this information has been used to design a new chromogenic substrate [1,2-di-O-octyl-sn-glycerol-3-O-(4-nitrophenyl) glutarate] for the determination of the lipolytic activity of PCL.     

Modulation of Mucor miehei lipase properties via directed immobilization on different hetero-functional epoxy resins: Hydrolytic resolution of (R,S)-2-butyroyl-2-phenylacetic acid

Purified lipase from Mucor miehei (MML) has been covalently immobilized on different epoxy resins (standard hydrophobic epoxy resins, epoxy-ethylenediamine, epoxy-iminodiacetic acid, epoxy-copper chelates) and adsorbed via interfacial activation on octadecyl-Sepabeads support (fully coated with very hydrophobic octadecyl groups). These immobilized enzyme preparations were used under slightly different conditions (temperature ranging from 4 to 25 °C and pH values from 5 to 7) in the hydrolytic resolution of (R,S)-2-butyroyl-2-phenylacetic acid.

Different catalytic properties (activity, specificity, enantioselectivity) were found depending on the particular support used. For example, the epoxy-iminodiacetic acid-Sepabeads gave the most active preparation at pH 7 while, at pH 5, the ethylenediamine-Sepabeads was superior.

More interestingly, the enantiomeric ratio (E) also depends strongly on the immobilized preparation and the conditions employed. Thus, the octadecyl-MML preparation was the only immobilized enzyme derivative which exhibited enantioselectivity towards R isomer (with E values ranging from 5 at 4 °C and pH 7 to 1.2 at pH 5 and 25 °C).

The other immobilized preparations, in contrast, were S selective. Immobilization on iminodiacetic acid-Sepabeads afforded the catalyst with the highest enantioselectivity (E=59 under optimum conditions).     

Preparation of optically active 4-allylazetidin-2-ones. An access to carbacephams

Transesterification of 4-allyl-1-hydroxymethylazetidin-2-ones using vinyl acetate in the presence of the lipase from Pseudomonas cepacia led to the corresponding (R)-acetates and the remaining (S)-alcohols in high yields and excellent ee's (E: 32–71). Subsequent reaction with BF₃-Et₂O can lead to the carbacepham framework.     

Stabilization of an intracellular Mucor circinelloides lipase for application in non-aqueous media

Different methods for stabilization of Mucor circinelloides lipase, facilitating its application in organic solvents were tested. Lipase was either isolated from the mycelium and immobilized on solid carriers (derivatives of cellulose, diatomaceous earth, modified porous glass) or immobilized in situ in the mycelium pellets and stabilized. The immobilized enzyme preparations were used for synthesis of sucrose, glucose, butyl and propyl oleates and caprylates, carried out in petroleum and di-n-pentyl ethers. Immobilized preparations of either crude or purified lipase isolated from the mycelium were at least 4–6 times less effective in sucrose esters synthesis than mycelium-bound lipase preparations. Lipase preparation with the highest synthetic activity was obtained by cross-linking of M. circinelloides mycelium pellets with glutardialdehyde (operational stability in sucrose caprylate synthesis was 94% after 4 runs (24 h each), and caprylic acid conversion was 91–85%). The best method for production of mechanically durable biocatalyst, which efficiently catalyzed sucrose esters synthesis, was found to be entrapment of the mycelium-bound lipase in polyvinyl pyrrolidone-containing chitosan beads solidified with hexametapolyphosphate.     

Enhanced activity and stability of immobilized lipases by treatment with polar solvents prior to lyophilization

Lipases from Candida rugosa, Mucor javanicus and Rhizopus oryzae were respectively adsorbed on Amberlite XAD-7 followed by incubation in 2-propanol and then lyophilization. The activities of the immobilized enzymes were 1.6–3.4 times higher than those of the immobilized enzymes without incubation in the organic solvent before lyophilization for esterification of lauric acid (0.1 M) and 1-propanol (0.1 M) in isooctane at 37 °C. The immobilized C. rugosa lipase (Sigma) without the incubation did not show any activity but displayed considerable activity (19.8 μmol h⁻¹ mg⁻¹) after the incubation before lyophilization. Besides 2-propanol, acetone, 1-propanol and ethyl acetate were also found to be good solvents for treating M. javanicus lipase immobilized on Amberlite XAD-7 and acetone was the best among them. When incubated in isooctane at 25 °C for 120 h, the immobilized M. javanicus lipase prepared by incubation in acetone for 1 h before lyophilization retained 70% of its initial activity while the immobilized enzyme without the solvent treatment kept only 50% of its initial activity.     

Methods for the immobilization of lipases and their use for ester synthesis

The lipase from Pseudomonas fluorescens was immobilized onto five different carriers: celite, octyl-silica, aminopropyl-silica, gluterdialdehyde-activated silica and Eupergit C250L. Activities and operational stabilities of the prepared catalysts were compared using the enantioselective acylation of (R,S)-1-phenylethanol by vinyl acetate as acyl donor and t-butylmethyl ether with variable water content (0.038-0.97% v/v) as reaction medium. The above carriers provide catalysts with widely different specific activities ranging from excellent 25 mmol/h mg protein (celite) to 0.07 mmol/h mg protein (glutardialdehyde-activated silica) on the lower end. The lipase immobilized onto Eupergit C250L exhibited the best operational stability among the catalysts studied. It retained 30% of its initial activity after 11 cycles of application, each with a duration between 2 and 6 h.     

Selective lipase-catalyzed preparation of diol monobenzoates by transesterification and alcoholysis reactions in organic solvents

Lipases from Mucor miehei (MML) and Candida antarctica (CAL) are able to catalyze the monobenzoylation of the primary hydroxy group of 1,2- 1,4- or 1,5-diols with vinyl benzoate in an organic solvent, the reaction proceeding with high regioselectivity and moderate enantioselectivity. The lipase-catalyzed debenzoylation of 1,2-propanediol dibenzoate by alcoholysis with 1-octanol most satisfactorily occurred with Pseudomonas cepacia lipase absorbed onto celite that allowed also to prepare (R)-1-benzoyloxy-2-methylpropan-3-ol from 2-methyl-1,3-propanediol dibenzoate, a result complementary to MML-catalyzed benzoylation of 2-methyl-1,3-propanediol that affords the (S)-monobenzoate.     

Regioselective enzymatic aminoacylation of lobucavir to give an intermediate for lobucavir prodrug

Synthesis of lobucavir prodrug, L-valine, [(1S,2R,3R)-3-(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)-2-(hydroxymethyl)cyclobutyl]methyl ester monohydrochloride (BMS 233866), requires regioselective coupling of one of the two hydroxyl groups of lobucavir (BMS 180194) with valine. Either hydroxyl group of lobucavir could be selectively aminoacylated with valine by using enzymatic reactions. N-[(Phenylmethoxy)carbonyl]-L-valine, [(1R,2R,4S)-2-(2-amino-6-oxo-1H-purin-9-yl)-4-(hydroxymethyl)cyclobutyl]methyl ester (3, 82.5% yield), was obtained by selective hydrolysis of N,N′-bis[(phenylmethoxy)carbonyl]bis[L-valine], O,O′-[(1S,2R,3R)-3-(2-amino-6-oxo-1H-purin-9-yl)cyclobuta-1,2-diyl]methyl ester (1) with lipase M, and L-valine, [(1R,2R,4S)-2-(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)-4-(hydroxymethyl)cyclobutyl]methyl ester monohydrochloride (4, 87% yield) was obtained by hydrolysis of bis[L-valine], O,O′-[(1S,2R,3R)-3-(2-amino-6-oxo-1H-purin-9-yl)cyclobuta-1,2-diyl]methyl ester, dihydrochloride (2), with lipase from Candida cylindracea. The final intermediate for lobucavir prodrug, N-[(phenylmethoxy)carbonyl]-L-valine, [(1S,2R,4R)-3-(2-amino-6-oxo-1H-purin-9-yl)-2-(hydroxymethyl)cyclobutyl]methyl ester (5), could be obtained by transesterification of lobucavir using ChiroCLEC™ BL (61% yield), or more selectively by using immobilized lipase from Pseudomonas cepacia (84% yield).     

Immobilized Pseudomonas cepacia lipase for biodiesel fuel production from soybean oil

Enzymatic transesterification of soybean oil with methanol and ethanol was studied. Of the nine lipases that were tested in the initial screening, lipase PS from Pseudomonas cepacia resulted in the highest yield of alkyl esters. Lipase from Pseudomonas cepacia was further investigated in immobilized form within a chemically inert, hydrophobic sol-gel support. The gel-entrapped lipase was prepared by polycondensation of hydrolyzed tetramethoxysilane and iso-butyltrimethoxysilane. Using the immobilized lipase PS, the effects of water and alcohol concentration, enzyme loading, enzyme thermal stability, and temperature in the transesterification reaction were investigated. The optimal conditions for processing 10 g of soybean oil were: 35 degrees C, 1:7.5 oil/methanol molar ratio, 0.5 g water and 475 mg lipase for the reactions with methanol, and 35 degrees C, 1:15.2 oil/ethanol molar ratio, 0.3 g water, 475 mg lipase for the reactions with ethanol. Subject to the optimal conditions, methyl and ethyl esters formation of 67 and 65 mol% in 1h of reaction were obtained for the immobilized enzyme reactions. Upon the reaction with the immobilized lipase, the triglycerides reached negligible levels after the first 30 min of the reaction and the immobilized lipase was consistently more active than the free enzyme. The immobilized lipase also proved to be stable and lost little activity when was subjected to repeated uses.     

Chemo-enzymatic synthesis of (R)-(+)-aminoglutethimide by kinetic resolution of (±)-4-cyano-4-phenyl-1-hexanol

Chemo-enzymatic approaches for the synthesis of the family of aromatase inhibitory drug via lipase-catalyzed kinetic resolution of (±)-4-cyano-4-phenyl-1-hexanol (2) as appropriate precursors were described. Enzymatic transesterification of primary alcohol (±)-2 using Pseudomonas cepacia (Amano PS, PCL) provided the enantiopure alcohol (R)-(−)-2 with 99% ee at conversion of 86%, while that of (±)-2 using Pseudomonas fluorescens (Amano AK, LAK) provided the (S)-(+)-2 with 96% ee at conversion of 86%. Chemical transformation of substrate (R)-(−)-2 gave (R)-(+)-aminoglutethimide (1) in enantioselectively high yield.     

Pseudomonas cepacia lipase-catalysed resolution of racemic alcohols in ionic liquid using succinic anhydride: role of triethylamine in enhancement of catalytic activity

Racemic secondary alcohols were resolved via enantioselective acylation using succinic anhydride as acyl donor catalysed by lipase from Pseudomonas cepacia supported on celite (PS-C) in ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate [bmim]PF₆. Organic base, namely triethylamine as an additive in ionic liquid has been found to enhance the rate of the reaction.     

Lactones 29 . Enzymatic resolution of racemic γ-lactones

Studies on the application of commercially available enzymes to resolution of the racemic unsaturated γ-lactones: 5-(3-methylbutylidene)-4-methyl-tetrahydrofuran-2-one (1a) and 5-(3,3-dimethylbutylidene)-4-methyl-tetrahydrofuran-2-one (2a) are presented. Lipase PS, Rhizopus niveus lipase, Rhizopus arrhizus lipase, porcine pancreas lipase and hog liver esterase transformed substrates into their respective γ-keto acids with good efficiency (50-75%). Three of them hydrolysed the studied lactones with moderate enantioselectivity. Enantiomeric excesses determined by GC for the unreacted lactones were in the range of 20-60%. Lipase PS preferentially hydrolysed the (+) enantiomers of lactones 1a and 2a whereas R. niveus lipase hydrolysed the (-) enantiomers, respectively.     

Immobilization and characterization of lipase from an indigenous Bacillus aryabhattai SE3-PB isolated from lipid-rich wastewater

Abstract

Extracellular lipase from an indigenous Bacillus aryabhattai SE3-PB was immobilized in alginate beads by entrapment method. After optimization of immobilization conditions, maximum immobilization efficiencies of 77%?±?1.53% and 75.99%?±?3.49% were recorded at optimum concentrations of 2% (w/v) sodium alginate and 0.2?M calcium chloride, respectively, for the entrapped enzyme. Biochemical properties of both free and immobilized lipase revealed no change in the optimum temperature and pH of both enzyme preparations, with maximum activity attained at 60?°C and 9.5, respectively. In comparison to free lipase, the immobilized enzyme exhibited improved stability over the studied pH range (8.5–9.5) and temperature (55–65?°C) when incubated for 3?h. Furthermore, the immobilized lipase showed enhanced enzyme-substrate affinity and higher catalytic efficiency when compared to soluble enzyme. The entrapped enzyme was also found to be more stable, retaining 61.51% and 49.44% of its original activity after being stored for 30 days at 4?°C and 25?°C, respectively. In addition, the insolubilized enzyme exhibited good reusability with 18.46% relative activity after being repeatedly used for six times. These findings suggest the efficient and sustainable use of the developed immobilized lipase for various biotechnological applications.     

Application of silica aerogel encapsulated lipases in the synthesis of biodiesel by transesterification reactions

Two types of commercial lipases preparations, one from Burkholderia cepacia, the other one from Candida antartica, were encapsulated in silica aerogels reinforced with silica quartz fibre felt and dried by the CO₂ supercritical technique. These immobilized biocatalysts were applied in biodiesel synthesis by transesterification of sunflower seed oil with methyl acetate. They were found to be efficient even with mixtures of both substrates without any solvent addition. The aerogel encapsulation technique made it possible to maintain the enzymes in a dispersion state similar to the dispersion prevailing in an aqueous solution, even for further use in organic hydrophobic media. In transesterification in excess iso-octane, the two lipases encapsulated in aerogels made from 40% MTMS, were found to have activities relatively close to each other and comparable with commercial Novozyme 435. On the other in transesterification with mixture of oil and methyl acetate without any solvent, the kinetics were severely limited by substrate diffusion inside the aerogels. This was particularly true with the C. antartica, so that the corresponding aerogel encapsulated enzyme was much less active than commercial Novozyme 435, although it improved after a few tests.     

Immobilized Pseudomonas sp. lipase: A powerful biocatalyst for asymmetric acylation of (±)-2-amino-1-phenylethanols with vinyl acetate

Pseudomonas sp. lipase was immobilized onto glutaraldehyde-activated Florisil^® support via Schiff base formation and stabilized by reducing Schiff base with sodium cyanoborohydride. The immobilization performance was evaluated in terms of bound protein per gram of support (%) and recovered activity (%). A 4-factor and 3-level Box–Behnken design was applied for the acylation of (±)-2-(propylamino)-1-phenylethanol, a model substrate, with vinyl acetate and the asymmetric acylations of other (±)-2-amino-1-phenylethanols with different alkyl substituents onto nitrogen atom such as (±)-2-(methylamino)-1-phenylethanol, (±)-2-(ethylamino)-1-phenylethanol, (±)-2-(butylamino)-1-phenylethanol and (±)-2-(hexylamino)-1-phenylethanol were performed under the optimized conditions. The optimal conditions were bulk water content of 1.8%, reaction temperature of 51.5 °C, initial molar ratio of vinyl acetate to amino alcohol of 1.92, and immobilized lipase loading of 47 mg mL^?1. (R)-enantiomers of tested amino alcohols were preferentially acylated and the reaction purely took place on the hydroxyl group of 2-amino-1-phenylethanols. The increase of alkyl chain length substituted onto nitrogen atom caused an increase in the acylation yield and ee values of (S)-enantiomers. Enantiomeric ratio values were >200 for all the reactions. Our results demonstrate that the immobilized lipase is a promising biocatalyst for the preparation of (S)-2-amino-1-phenylethanols and their corresponding (R)-esters via O-selective acylation of (±)-2-amino-1-phenylethanols with vinyl acetate.